| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "zip_archive.h" |
| |
| #include <fcntl.h> |
| #include <stdio.h> |
| #include <sys/mman.h> // For the PROT_* and MAP_* constants. |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| #include <vector> |
| |
| #include "android-base/stringprintf.h" |
| #include "ziparchive/zip_archive.h" |
| |
| #include "base/bit_utils.h" |
| #include "base/unix_file/fd_file.h" |
| |
| namespace art { |
| |
| // Log file contents and mmap info when mapping entries directly. |
| static constexpr const bool kDebugZipMapDirectly = false; |
| |
| using android::base::StringPrintf; |
| |
| uint32_t ZipEntry::GetUncompressedLength() { |
| return zip_entry_->uncompressed_length; |
| } |
| |
| uint32_t ZipEntry::GetCrc32() { |
| return zip_entry_->crc32; |
| } |
| |
| bool ZipEntry::IsUncompressed() { |
| return zip_entry_->method == kCompressStored; |
| } |
| |
| bool ZipEntry::IsAlignedTo(size_t alignment) { |
| DCHECK(IsPowerOfTwo(alignment)) << alignment; |
| return IsAlignedParam(zip_entry_->offset, static_cast<int>(alignment)); |
| } |
| |
| ZipEntry::~ZipEntry() { |
| delete zip_entry_; |
| } |
| |
| bool ZipEntry::ExtractToFile(File& file, std::string* error_msg) { |
| const int32_t error = ExtractEntryToFile(handle_, zip_entry_, file.Fd()); |
| if (error) { |
| *error_msg = std::string(ErrorCodeString(error)); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| MemMap* ZipEntry::ExtractToMemMap(const char* zip_filename, const char* entry_filename, |
| std::string* error_msg) { |
| std::string name(entry_filename); |
| name += " extracted in memory from "; |
| name += zip_filename; |
| std::unique_ptr<MemMap> map(MemMap::MapAnonymous(name.c_str(), |
| nullptr, GetUncompressedLength(), |
| PROT_READ | PROT_WRITE, false, false, |
| error_msg)); |
| if (map.get() == nullptr) { |
| DCHECK(!error_msg->empty()); |
| return nullptr; |
| } |
| |
| const int32_t error = ExtractToMemory(handle_, zip_entry_, |
| map->Begin(), map->Size()); |
| if (error) { |
| *error_msg = std::string(ErrorCodeString(error)); |
| return nullptr; |
| } |
| |
| return map.release(); |
| } |
| |
| MemMap* ZipEntry::MapDirectlyFromFile(const char* zip_filename, std::string* error_msg) { |
| const int zip_fd = GetFileDescriptor(handle_); |
| const char* entry_filename = entry_name_.c_str(); |
| |
| // Should not happen since we don't have a memory ZipArchive constructor. |
| // However the underlying ZipArchive isn't required to have an FD, |
| // so check to be sure. |
| CHECK_GE(zip_fd, 0) << |
| StringPrintf("Cannot map '%s' (in zip '%s') directly because the zip archive " |
| "is not file backed.", |
| entry_filename, |
| zip_filename); |
| |
| if (!IsUncompressed()) { |
| *error_msg = StringPrintf("Cannot map '%s' (in zip '%s') directly because it is compressed.", |
| entry_filename, |
| zip_filename); |
| return nullptr; |
| } else if (zip_entry_->uncompressed_length != zip_entry_->compressed_length) { |
| *error_msg = StringPrintf("Cannot map '%s' (in zip '%s') directly because " |
| "entry has bad size (%u != %u).", |
| entry_filename, |
| zip_filename, |
| zip_entry_->uncompressed_length, |
| zip_entry_->compressed_length); |
| return nullptr; |
| } |
| |
| std::string name(entry_filename); |
| name += " mapped directly in memory from "; |
| name += zip_filename; |
| |
| const off_t offset = zip_entry_->offset; |
| |
| if (kDebugZipMapDirectly) { |
| LOG(INFO) << "zip_archive: " << "make mmap of " << name << " @ offset = " << offset; |
| } |
| |
| std::unique_ptr<MemMap> map( |
| MemMap::MapFileAtAddress(nullptr, // Expected pointer address |
| GetUncompressedLength(), // Byte count |
| PROT_READ | PROT_WRITE, |
| MAP_PRIVATE, |
| zip_fd, |
| offset, |
| false, // Don't restrict allocation to lower4GB |
| false, // Doesn't overlap existing map (reuse=false) |
| name.c_str(), |
| /*out*/error_msg)); |
| |
| if (map == nullptr) { |
| DCHECK(!error_msg->empty()); |
| } |
| |
| if (kDebugZipMapDirectly) { |
| // Dump contents of file, same format as using this shell command: |
| // $> od -j <offset> -t x1 <zip_filename> |
| static constexpr const int kMaxDumpChars = 15; |
| lseek(zip_fd, 0, SEEK_SET); |
| |
| int count = offset + kMaxDumpChars; |
| |
| std::string tmp; |
| char buf; |
| |
| // Dump file contents. |
| int i = 0; |
| while (read(zip_fd, &buf, 1) > 0 && i < count) { |
| tmp += StringPrintf("%3d ", (unsigned int)buf); |
| ++i; |
| } |
| |
| LOG(INFO) << "map_fd raw bytes starting at 0"; |
| LOG(INFO) << "" << tmp; |
| LOG(INFO) << "---------------------------"; |
| |
| // Dump map contents. |
| if (map != nullptr) { |
| tmp = ""; |
| |
| count = kMaxDumpChars; |
| |
| uint8_t* begin = map->Begin(); |
| for (i = 0; i < count; ++i) { |
| tmp += StringPrintf("%3d ", (unsigned int)begin[i]); |
| } |
| |
| LOG(INFO) << "map address " << StringPrintf("%p", begin); |
| LOG(INFO) << "map first " << kMaxDumpChars << " chars:"; |
| LOG(INFO) << tmp; |
| } |
| } |
| |
| return map.release(); |
| } |
| |
| static void SetCloseOnExec(int fd) { |
| // This dance is more portable than Linux's O_CLOEXEC open(2) flag. |
| int flags = fcntl(fd, F_GETFD); |
| if (flags == -1) { |
| PLOG(WARNING) << "fcntl(" << fd << ", F_GETFD) failed"; |
| return; |
| } |
| int rc = fcntl(fd, F_SETFD, flags | FD_CLOEXEC); |
| if (rc == -1) { |
| PLOG(WARNING) << "fcntl(" << fd << ", F_SETFD, " << flags << ") failed"; |
| return; |
| } |
| } |
| |
| ZipArchive* ZipArchive::Open(const char* filename, std::string* error_msg) { |
| DCHECK(filename != nullptr); |
| |
| ZipArchiveHandle handle; |
| const int32_t error = OpenArchive(filename, &handle); |
| if (error) { |
| *error_msg = std::string(ErrorCodeString(error)); |
| CloseArchive(handle); |
| return nullptr; |
| } |
| |
| SetCloseOnExec(GetFileDescriptor(handle)); |
| return new ZipArchive(handle); |
| } |
| |
| ZipArchive* ZipArchive::OpenFromFd(int fd, const char* filename, std::string* error_msg) { |
| DCHECK(filename != nullptr); |
| DCHECK_GT(fd, 0); |
| |
| ZipArchiveHandle handle; |
| const int32_t error = OpenArchiveFd(fd, filename, &handle); |
| if (error) { |
| *error_msg = std::string(ErrorCodeString(error)); |
| CloseArchive(handle); |
| return nullptr; |
| } |
| |
| SetCloseOnExec(GetFileDescriptor(handle)); |
| return new ZipArchive(handle); |
| } |
| |
| ZipEntry* ZipArchive::Find(const char* name, std::string* error_msg) const { |
| DCHECK(name != nullptr); |
| |
| // Resist the urge to delete the space. <: is a bigraph sequence. |
| std::unique_ptr< ::ZipEntry> zip_entry(new ::ZipEntry); |
| const int32_t error = FindEntry(handle_, ZipString(name), zip_entry.get()); |
| if (error) { |
| *error_msg = std::string(ErrorCodeString(error)); |
| return nullptr; |
| } |
| |
| return new ZipEntry(handle_, zip_entry.release(), name); |
| } |
| |
| ZipArchive::~ZipArchive() { |
| CloseArchive(handle_); |
| } |
| |
| } // namespace art |