runtime/fault_handler.cc - platform/art - Gitiles

 /*
  * Copyright (C) 2008 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "fault_handler.h"

 #include <setjmp.h>
 #include <sys/mman.h>
 #include <sys/ucontext.h>
 #include "base/stl_util.h"
 #include "mirror/art_method.h"
 #include "mirror/class.h"
 #include "sigchain.h"
 #include "thread-inl.h"
 #include "verify_object-inl.h"

 // Note on nested signal support
 // -----------------------------
 //
 // Typically a signal handler should not need to deal with signals that occur within it.
 // However, when a SIGSEGV occurs that is in generated code and is not one of the
 // handled signals (implicit checks), we call a function to try to dump the stack
 // to the log.  This enhances the debugging experience but may have the side effect
 // that it may not work.  If the cause of the original SIGSEGV is a corrupted stack or other
 // memory region, the stack backtrace code may run into trouble and may either crash
 // or fail with an abort (SIGABRT).  In either case we don't want that (new) signal to
 // mask the original signal and thus prevent useful debug output from being presented.
 //
 // In order to handle this situation, before we call the stack tracer we do the following:
 //
 // 1. shutdown the fault manager so that we are talking to the real signal management
 //    functions rather than those in sigchain.
 // 2. use pthread_sigmask to allow SIGSEGV and SIGABRT signals to be delivered to the
 //    thread running the signal handler.
 // 3. set the handler for SIGSEGV and SIGABRT to a secondary signal handler.
 // 4. save the thread's state to the TLS of the current thread using 'setjmp'
 //
 // We then call the stack tracer and one of two things may happen:
 // a. it completes successfully
 // b. it crashes and a signal is raised.
 //
 // In the former case, we fall through and everything is fine.  In the latter case
 // our secondary signal handler gets called in a signal context.  This results in
 // a call to FaultManager::HandledNestedSignal(), an archirecture specific function
 // whose purpose is to call 'longjmp' on the jmp_buf saved in the TLS of the current
 // thread.  This results in a return with a non-zero value from 'setjmp'.  We detect this
 // and write something to the log to tell the user that it happened.
 //
 // Regardless of how we got there, we reach the code after the stack tracer and we
 // restore the signal states to their original values, reinstate the fault manager (thus
 // reestablishing the signal chain) and continue.

 // This is difficult to test with a runtime test.  To invoke the nested signal code
 // on any signal, uncomment the following line and run something that throws a
 // NullPointerException.
 // #define TEST_NESTED_SIGNAL

 namespace art {
 // Static fault manger object accessed by signal handler.
 FaultManager fault_manager;

 extern "C" {
 void art_sigsegv_fault() {
   // Set a breakpoint here to be informed when a SIGSEGV is unhandled by ART.
   VLOG(signals)<< "Caught unknown SIGSEGV in ART fault handler - chaining to next handler.";
 }
 }

 // Signal handler called on SIGSEGV.
 static void art_fault_handler(int sig, siginfo_t* info, void* context) {
   fault_manager.HandleFault(sig, info, context);
 }

 // Signal handler for dealing with a nested signal.
 static void art_nested_signal_handler(int sig, siginfo_t* info, void* context) {
   fault_manager.HandleNestedSignal(sig, info, context);
 }

 FaultManager::FaultManager() : initialized_(false) {
   sigaction(SIGSEGV, nullptr, &oldaction_);
 }

 FaultManager::~FaultManager() {
 }

 static void SetUpArtAction(struct sigaction* action) {
   action->sa_sigaction = art_fault_handler;
   sigemptyset(&action->sa_mask);
   action->sa_flags = SA_SIGINFO | SA_ONSTACK;
 #if !defined(__APPLE__) && !defined(__mips__)
   action->sa_restorer = nullptr;
 #endif
 }

 void FaultManager::EnsureArtActionInFrontOfSignalChain() {
   if (initialized_) {
     struct sigaction action;
     SetUpArtAction(&action);
     EnsureFrontOfChain(SIGSEGV, &action);
   } else {
     LOG(WARNING) << "Can't call " << __FUNCTION__ << " due to unitialized fault manager";
   }
 }

 void FaultManager::Init() {
   CHECK(!initialized_);
   struct sigaction action;
   SetUpArtAction(&action);

   // Set our signal handler now.
   int e = sigaction(SIGSEGV, &action, &oldaction_);
   if (e != 0) {
     VLOG(signals) << "Failed to claim SEGV: " << strerror(errno);
   }
   // Make sure our signal handler is called before any user handlers.
   ClaimSignalChain(SIGSEGV, &oldaction_);
   initialized_ = true;
 }

 void FaultManager::Release() {
   if (initialized_) {
     UnclaimSignalChain(SIGSEGV);
     initialized_ = false;
   }
 }

 void FaultManager::Shutdown() {
   if (initialized_) {
     Release();

     // Free all handlers.
     STLDeleteElements(&generated_code_handlers_);
     STLDeleteElements(&other_handlers_);
   }
 }

 void FaultManager::HandleFault(int sig, siginfo_t* info, void* context) {
   // BE CAREFUL ALLOCATING HERE INCLUDING USING LOG(...)
   //
   // If malloc calls abort, it will be holding its lock.
   // If the handler tries to call malloc, it will deadlock.
   VLOG(signals) << "Handling fault";
   if (IsInGeneratedCode(info, context, true)) {
     VLOG(signals) << "in generated code, looking for handler";
     for (const auto& handler : generated_code_handlers_) {
       VLOG(signals) << "invoking Action on handler " << handler;
       if (handler->Action(sig, info, context)) {
 #ifdef TEST_NESTED_SIGNAL
         // In test mode we want to fall through to stack trace handler
         // on every signal (in reality this will cause a crash on the first
         // signal).
         break;
 #else
         // We have handled a signal so it's time to return from the
         // signal handler to the appropriate place.
         return;
 #endif
       }
     }
   }

   // We hit a signal we didn't handle.  This might be something for which
   // we can give more information about so call all registered handlers to see
   // if it is.

   Thread* self = Thread::Current();

   // Now set up the nested signal handler.

   // Release the fault manager so that it will remove the signal chain for
   // SIGSEGV and we call the real sigaction.
   fault_manager.Release();

   // The action for SIGSEGV should be the default handler now.

   // Unblock the signals we allow so that they can be delivered in the signal handler.
   sigset_t sigset;
   sigemptyset(&sigset);
   sigaddset(&sigset, SIGSEGV);
   sigaddset(&sigset, SIGABRT);
   pthread_sigmask(SIG_UNBLOCK, &sigset, nullptr);

   // If we get a signal in this code we want to invoke our nested signal
   // handler.
   struct sigaction action, oldsegvaction, oldabortaction;
   action.sa_sigaction = art_nested_signal_handler;

   // Explicitly mask out SIGSEGV and SIGABRT from the nested signal handler.  This
   // should be the default but we definitely don't want these happening in our
   // nested signal handler.
   sigemptyset(&action.sa_mask);
   sigaddset(&action.sa_mask, SIGSEGV);
   sigaddset(&action.sa_mask, SIGABRT);

   action.sa_flags = SA_SIGINFO | SA_ONSTACK;
 #if !defined(__APPLE__) && !defined(__mips__)
   action.sa_restorer = nullptr;
 #endif

   // Catch SIGSEGV and SIGABRT to invoke our nested handler
   int e1 = sigaction(SIGSEGV, &action, &oldsegvaction);
   int e2 = sigaction(SIGABRT, &action, &oldabortaction);
   if (e1 != 0 || e2 != 0) {
     LOG(ERROR) << "Unable to set up nested signal handler";
   } else {
     // Save the current state and call the handlers.  If anything causes a signal
     // our nested signal handler will be invoked and this will longjmp to the saved
     // state.
     if (setjmp(*self->GetNestedSignalState()) == 0) {
       for (const auto& handler : other_handlers_) {
         if (handler->Action(sig, info, context)) {
           // Restore the signal handlers, reinit the fault manager and return.  Signal was
           // handled.
           sigaction(SIGSEGV, &oldsegvaction, nullptr);
           sigaction(SIGABRT, &oldabortaction, nullptr);
           fault_manager.Init();
           return;
         }
       }
     } else {
       LOG(ERROR) << "Nested signal detected - original signal being reported";
     }

     // Restore the signal handlers.
     sigaction(SIGSEGV, &oldsegvaction, nullptr);
     sigaction(SIGABRT, &oldabortaction, nullptr);
   }

   // Now put the fault manager back in place.
   fault_manager.Init();

   // Set a breakpoint in this function to catch unhandled signals.
   art_sigsegv_fault();

   // Pass this on to the next handler in the chain, or the default if none.
   InvokeUserSignalHandler(sig, info, context);
 }

 void FaultManager::AddHandler(FaultHandler* handler, bool generated_code) {
   DCHECK(initialized_);
   if (generated_code) {
     generated_code_handlers_.push_back(handler);
   } else {
     other_handlers_.push_back(handler);
   }
 }

 void FaultManager::RemoveHandler(FaultHandler* handler) {
   auto it = std::find(generated_code_handlers_.begin(), generated_code_handlers_.end(), handler);
   if (it != generated_code_handlers_.end()) {
     generated_code_handlers_.erase(it);
     return;
   }
   auto it2 = std::find(other_handlers_.begin(), other_handlers_.end(), handler);
   if (it2 != other_handlers_.end()) {
     other_handlers_.erase(it);
     return;
   }
   LOG(FATAL) << "Attempted to remove non existent handler " << handler;
 }

 // This function is called within the signal handler.  It checks that
 // the mutator_lock is held (shared).  No annotalysis is done.
 bool FaultManager::IsInGeneratedCode(siginfo_t* siginfo, void* context, bool check_dex_pc) {
   // We can only be running Java code in the current thread if it
   // is in Runnable state.
   VLOG(signals) << "Checking for generated code";
   Thread* thread = Thread::Current();
   if (thread == nullptr) {
     VLOG(signals) << "no current thread";
     return false;
   }

   ThreadState state = thread->GetState();
   if (state != kRunnable) {
     VLOG(signals) << "not runnable";
     return false;
   }

   // Current thread is runnable.
   // Make sure it has the mutator lock.
   if (!Locks::mutator_lock_->IsSharedHeld(thread)) {
     VLOG(signals) << "no lock";
     return false;
   }

   mirror::ArtMethod* method_obj = 0;
   uintptr_t return_pc = 0;
   uintptr_t sp = 0;

   // Get the architecture specific method address and return address.  These
   // are in architecture specific files in arch/<arch>/fault_handler_<arch>.
   GetMethodAndReturnPcAndSp(siginfo, context, &method_obj, &return_pc, &sp);

   // If we don't have a potential method, we're outta here.
   VLOG(signals) << "potential method: " << method_obj;
   if (method_obj == 0 || !IsAligned<kObjectAlignment>(method_obj)) {
     VLOG(signals) << "no method";
     return false;
   }

   // Verify that the potential method is indeed a method.
   // TODO: check the GC maps to make sure it's an object.
   // Check that the class pointer inside the object is not null and is aligned.
   // TODO: Method might be not a heap address, and GetClass could fault.
   mirror::Class* cls = method_obj->GetClass<kVerifyNone>();
   if (cls == nullptr) {
     VLOG(signals) << "not a class";
     return false;
   }
   if (!IsAligned<kObjectAlignment>(cls)) {
     VLOG(signals) << "not aligned";
     return false;
   }


   if (!VerifyClassClass(cls)) {
     VLOG(signals) << "not a class class";
     return false;
   }

   // Now make sure the class is a mirror::ArtMethod.
   if (!cls->IsArtMethodClass()) {
     VLOG(signals) << "not a method";
     return false;
   }

   // We can be certain that this is a method now.  Check if we have a GC map
   // at the return PC address.
   if (true || kIsDebugBuild) {
     VLOG(signals) << "looking for dex pc for return pc " << std::hex << return_pc;
     const void* code = Runtime::Current()->GetInstrumentation()->GetQuickCodeFor(method_obj);
     uint32_t sought_offset = return_pc - reinterpret_cast<uintptr_t>(code);
     VLOG(signals) << "pc offset: " << std::hex << sought_offset;
   }
   uint32_t dexpc = method_obj->ToDexPc(return_pc, false);
   VLOG(signals) << "dexpc: " << dexpc;
   return !check_dex_pc || dexpc != DexFile::kDexNoIndex;
 }

 FaultHandler::FaultHandler(FaultManager* manager) : manager_(manager) {
 }

 //
 // Null pointer fault handler
 //
 NullPointerHandler::NullPointerHandler(FaultManager* manager) : FaultHandler(manager) {
   manager_->AddHandler(this, true);
 }

 //
 // Suspension fault handler
 //
 SuspensionHandler::SuspensionHandler(FaultManager* manager) : FaultHandler(manager) {
   manager_->AddHandler(this, true);
 }

 //
 // Stack overflow fault handler
 //
 StackOverflowHandler::StackOverflowHandler(FaultManager* manager) : FaultHandler(manager) {
   manager_->AddHandler(this, true);
 }

 //
 // Stack trace handler, used to help get a stack trace from SIGSEGV inside of compiled code.
 //
 JavaStackTraceHandler::JavaStackTraceHandler(FaultManager* manager) : FaultHandler(manager) {
   manager_->AddHandler(this, false);
 }

 bool JavaStackTraceHandler::Action(int sig, siginfo_t* siginfo, void* context) {
   // Make sure that we are in the generated code, but we may not have a dex pc.

 #ifdef TEST_NESTED_SIGNAL
   bool in_generated_code = true;
 #else
   bool in_generated_code = manager_->IsInGeneratedCode(siginfo, context, false);
 #endif
   if (in_generated_code) {
     LOG(ERROR) << "Dumping java stack trace for crash in generated code";
     mirror::ArtMethod* method = nullptr;
     uintptr_t return_pc = 0;
     uintptr_t sp = 0;
     Thread* self = Thread::Current();

     manager_->GetMethodAndReturnPcAndSp(siginfo, context, &method, &return_pc, &sp);
     // Inside of generated code, sp[0] is the method, so sp is the frame.
     StackReference<mirror::ArtMethod>* frame =
         reinterpret_cast<StackReference<mirror::ArtMethod>*>(sp);
     self->SetTopOfStack(frame);
 #ifdef TEST_NESTED_SIGNAL
     // To test the nested signal handler we raise a signal here.  This will cause the
     // nested signal handler to be called and perform a longjmp back to the setjmp
     // above.
     abort();
 #endif
     self->DumpJavaStack(LOG(ERROR));
   }

   return false;  // Return false since we want to propagate the fault to the main signal handler.
 }

 }   // namespace art
	/*
	* Copyright (C) 2008 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "fault_handler.h"

	#include <setjmp.h>
	#include <sys/mman.h>
	#include <sys/ucontext.h>
	#include "base/stl_util.h"
	#include "mirror/art_method.h"
	#include "mirror/class.h"
	#include "sigchain.h"
	#include "thread-inl.h"
	#include "verify_object-inl.h"

	// Note on nested signal support
	// -----------------------------
	//
	// Typically a signal handler should not need to deal with signals that occur within it.
	// However, when a SIGSEGV occurs that is in generated code and is not one of the
	// handled signals (implicit checks), we call a function to try to dump the stack
	// to the log. This enhances the debugging experience but may have the side effect
	// that it may not work. If the cause of the original SIGSEGV is a corrupted stack or other
	// memory region, the stack backtrace code may run into trouble and may either crash
	// or fail with an abort (SIGABRT). In either case we don't want that (new) signal to
	// mask the original signal and thus prevent useful debug output from being presented.
	//
	// In order to handle this situation, before we call the stack tracer we do the following:
	//
	// 1. shutdown the fault manager so that we are talking to the real signal management
	// functions rather than those in sigchain.
	// 2. use pthread_sigmask to allow SIGSEGV and SIGABRT signals to be delivered to the
	// thread running the signal handler.
	// 3. set the handler for SIGSEGV and SIGABRT to a secondary signal handler.
	// 4. save the thread's state to the TLS of the current thread using 'setjmp'
	//
	// We then call the stack tracer and one of two things may happen:
	// a. it completes successfully
	// b. it crashes and a signal is raised.
	//
	// In the former case, we fall through and everything is fine. In the latter case
	// our secondary signal handler gets called in a signal context. This results in
	// a call to FaultManager::HandledNestedSignal(), an archirecture specific function
	// whose purpose is to call 'longjmp' on the jmp_buf saved in the TLS of the current
	// thread. This results in a return with a non-zero value from 'setjmp'. We detect this
	// and write something to the log to tell the user that it happened.
	//
	// Regardless of how we got there, we reach the code after the stack tracer and we
	// restore the signal states to their original values, reinstate the fault manager (thus
	// reestablishing the signal chain) and continue.

	// This is difficult to test with a runtime test. To invoke the nested signal code
	// on any signal, uncomment the following line and run something that throws a
	// NullPointerException.
	// #define TEST_NESTED_SIGNAL

	namespace art {
	// Static fault manger object accessed by signal handler.
	FaultManager fault_manager;

	extern "C" {
	void art_sigsegv_fault() {
	// Set a breakpoint here to be informed when a SIGSEGV is unhandled by ART.
	VLOG(signals)<< "Caught unknown SIGSEGV in ART fault handler - chaining to next handler.";
	}
	}

	// Signal handler called on SIGSEGV.
	static void art_fault_handler(int sig, siginfo_t* info, void* context) {
	fault_manager.HandleFault(sig, info, context);
	}

	// Signal handler for dealing with a nested signal.
	static void art_nested_signal_handler(int sig, siginfo_t* info, void* context) {
	fault_manager.HandleNestedSignal(sig, info, context);
	}

	FaultManager::FaultManager() : initialized_(false) {
	sigaction(SIGSEGV, nullptr, &oldaction_);
	}

	FaultManager::~FaultManager() {
	}

	static void SetUpArtAction(struct sigaction* action) {
	action->sa_sigaction = art_fault_handler;
	sigemptyset(&action->sa_mask);
	action->sa_flags = SA_SIGINFO \| SA_ONSTACK;
	#if !defined(__APPLE__) && !defined(__mips__)
	action->sa_restorer = nullptr;
	#endif
	}

	void FaultManager::EnsureArtActionInFrontOfSignalChain() {
	if (initialized_) {
	struct sigaction action;
	SetUpArtAction(&action);
	EnsureFrontOfChain(SIGSEGV, &action);
	} else {
	LOG(WARNING) << "Can't call " << __FUNCTION__ << " due to unitialized fault manager";
	}
	}

	void FaultManager::Init() {
	CHECK(!initialized_);
	struct sigaction action;
	SetUpArtAction(&action);

	// Set our signal handler now.
	int e = sigaction(SIGSEGV, &action, &oldaction_);
	if (e != 0) {
	VLOG(signals) << "Failed to claim SEGV: " << strerror(errno);
	}
	// Make sure our signal handler is called before any user handlers.
	ClaimSignalChain(SIGSEGV, &oldaction_);
	initialized_ = true;
	}

	void FaultManager::Release() {
	if (initialized_) {
	UnclaimSignalChain(SIGSEGV);
	initialized_ = false;
	}
	}

	void FaultManager::Shutdown() {
	if (initialized_) {
	Release();

	// Free all handlers.
	STLDeleteElements(&generated_code_handlers_);
	STLDeleteElements(&other_handlers_);
	}
	}

	void FaultManager::HandleFault(int sig, siginfo_t* info, void* context) {
	// BE CAREFUL ALLOCATING HERE INCLUDING USING LOG(...)
	//
	// If malloc calls abort, it will be holding its lock.
	// If the handler tries to call malloc, it will deadlock.
	VLOG(signals) << "Handling fault";
	if (IsInGeneratedCode(info, context, true)) {
	VLOG(signals) << "in generated code, looking for handler";
	for (const auto& handler : generated_code_handlers_) {
	VLOG(signals) << "invoking Action on handler " << handler;
	if (handler->Action(sig, info, context)) {
	#ifdef TEST_NESTED_SIGNAL
	// In test mode we want to fall through to stack trace handler
	// on every signal (in reality this will cause a crash on the first
	// signal).
	break;
	#else
	// We have handled a signal so it's time to return from the
	// signal handler to the appropriate place.
	return;
	#endif
	}
	}
	}

	// We hit a signal we didn't handle. This might be something for which
	// we can give more information about so call all registered handlers to see
	// if it is.

	Thread* self = Thread::Current();

	// Now set up the nested signal handler.

	// Release the fault manager so that it will remove the signal chain for
	// SIGSEGV and we call the real sigaction.
	fault_manager.Release();

	// The action for SIGSEGV should be the default handler now.

	// Unblock the signals we allow so that they can be delivered in the signal handler.
	sigset_t sigset;
	sigemptyset(&sigset);
	sigaddset(&sigset, SIGSEGV);
	sigaddset(&sigset, SIGABRT);
	pthread_sigmask(SIG_UNBLOCK, &sigset, nullptr);

	// If we get a signal in this code we want to invoke our nested signal
	// handler.
	struct sigaction action, oldsegvaction, oldabortaction;
	action.sa_sigaction = art_nested_signal_handler;

	// Explicitly mask out SIGSEGV and SIGABRT from the nested signal handler. This
	// should be the default but we definitely don't want these happening in our
	// nested signal handler.
	sigemptyset(&action.sa_mask);
	sigaddset(&action.sa_mask, SIGSEGV);
	sigaddset(&action.sa_mask, SIGABRT);

	action.sa_flags = SA_SIGINFO \| SA_ONSTACK;
	#if !defined(__APPLE__) && !defined(__mips__)
	action.sa_restorer = nullptr;
	#endif

	// Catch SIGSEGV and SIGABRT to invoke our nested handler
	int e1 = sigaction(SIGSEGV, &action, &oldsegvaction);
	int e2 = sigaction(SIGABRT, &action, &oldabortaction);
	if (e1 != 0 \|\| e2 != 0) {
	LOG(ERROR) << "Unable to set up nested signal handler";
	} else {
	// Save the current state and call the handlers. If anything causes a signal
	// our nested signal handler will be invoked and this will longjmp to the saved
	// state.
	if (setjmp(*self->GetNestedSignalState()) == 0) {
	for (const auto& handler : other_handlers_) {
	if (handler->Action(sig, info, context)) {
	// Restore the signal handlers, reinit the fault manager and return. Signal was
	// handled.
	sigaction(SIGSEGV, &oldsegvaction, nullptr);
	sigaction(SIGABRT, &oldabortaction, nullptr);
	fault_manager.Init();
	return;
	}
	}
	} else {
	LOG(ERROR) << "Nested signal detected - original signal being reported";
	}

	// Restore the signal handlers.
	sigaction(SIGSEGV, &oldsegvaction, nullptr);
	sigaction(SIGABRT, &oldabortaction, nullptr);
	}

	// Now put the fault manager back in place.
	fault_manager.Init();

	// Set a breakpoint in this function to catch unhandled signals.
	art_sigsegv_fault();

	// Pass this on to the next handler in the chain, or the default if none.
	InvokeUserSignalHandler(sig, info, context);
	}

	void FaultManager::AddHandler(FaultHandler* handler, bool generated_code) {
	DCHECK(initialized_);
	if (generated_code) {
	generated_code_handlers_.push_back(handler);
	} else {
	other_handlers_.push_back(handler);
	}
	}

	void FaultManager::RemoveHandler(FaultHandler* handler) {
	auto it = std::find(generated_code_handlers_.begin(), generated_code_handlers_.end(), handler);
	if (it != generated_code_handlers_.end()) {
	generated_code_handlers_.erase(it);
	return;
	}
	auto it2 = std::find(other_handlers_.begin(), other_handlers_.end(), handler);
	if (it2 != other_handlers_.end()) {
	other_handlers_.erase(it);
	return;
	}
	LOG(FATAL) << "Attempted to remove non existent handler " << handler;
	}

	// This function is called within the signal handler. It checks that
	// the mutator_lock is held (shared). No annotalysis is done.
	bool FaultManager::IsInGeneratedCode(siginfo_t* siginfo, void* context, bool check_dex_pc) {
	// We can only be running Java code in the current thread if it
	// is in Runnable state.
	VLOG(signals) << "Checking for generated code";
	Thread* thread = Thread::Current();
	if (thread == nullptr) {
	VLOG(signals) << "no current thread";
	return false;
	}

	ThreadState state = thread->GetState();
	if (state != kRunnable) {
	VLOG(signals) << "not runnable";
	return false;
	}

	// Current thread is runnable.
	// Make sure it has the mutator lock.
	if (!Locks::mutator_lock_->IsSharedHeld(thread)) {
	VLOG(signals) << "no lock";
	return false;
	}

	mirror::ArtMethod* method_obj = 0;
	uintptr_t return_pc = 0;
	uintptr_t sp = 0;

	// Get the architecture specific method address and return address. These
	// are in architecture specific files in arch/<arch>/fault_handler_<arch>.
	GetMethodAndReturnPcAndSp(siginfo, context, &method_obj, &return_pc, &sp);

	// If we don't have a potential method, we're outta here.
	VLOG(signals) << "potential method: " << method_obj;
	if (method_obj == 0 \|\| !IsAligned<kObjectAlignment>(method_obj)) {
	VLOG(signals) << "no method";
	return false;
	}

	// Verify that the potential method is indeed a method.
	// TODO: check the GC maps to make sure it's an object.
	// Check that the class pointer inside the object is not null and is aligned.
	// TODO: Method might be not a heap address, and GetClass could fault.
	mirror::Class* cls = method_obj->GetClass<kVerifyNone>();
	if (cls == nullptr) {
	VLOG(signals) << "not a class";
	return false;
	}
	if (!IsAligned<kObjectAlignment>(cls)) {
	VLOG(signals) << "not aligned";
	return false;
	}


	if (!VerifyClassClass(cls)) {
	VLOG(signals) << "not a class class";
	return false;
	}

	// Now make sure the class is a mirror::ArtMethod.
	if (!cls->IsArtMethodClass()) {
	VLOG(signals) << "not a method";
	return false;
	}

	// We can be certain that this is a method now. Check if we have a GC map
	// at the return PC address.
	if (true \|\| kIsDebugBuild) {
	VLOG(signals) << "looking for dex pc for return pc " << std::hex << return_pc;
	const void* code = Runtime::Current()->GetInstrumentation()->GetQuickCodeFor(method_obj);
	uint32_t sought_offset = return_pc - reinterpret_cast<uintptr_t>(code);
	VLOG(signals) << "pc offset: " << std::hex << sought_offset;
	}
	uint32_t dexpc = method_obj->ToDexPc(return_pc, false);
	VLOG(signals) << "dexpc: " << dexpc;
	return !check_dex_pc \|\| dexpc != DexFile::kDexNoIndex;
	}

	FaultHandler::FaultHandler(FaultManager* manager) : manager_(manager) {
	}

	//
	// Null pointer fault handler
	//
	NullPointerHandler::NullPointerHandler(FaultManager* manager) : FaultHandler(manager) {
	manager_->AddHandler(this, true);
	}

	//
	// Suspension fault handler
	//
	SuspensionHandler::SuspensionHandler(FaultManager* manager) : FaultHandler(manager) {
	manager_->AddHandler(this, true);
	}

	//
	// Stack overflow fault handler
	//
	StackOverflowHandler::StackOverflowHandler(FaultManager* manager) : FaultHandler(manager) {
	manager_->AddHandler(this, true);
	}

	//
	// Stack trace handler, used to help get a stack trace from SIGSEGV inside of compiled code.
	//
	JavaStackTraceHandler::JavaStackTraceHandler(FaultManager* manager) : FaultHandler(manager) {
	manager_->AddHandler(this, false);
	}

	bool JavaStackTraceHandler::Action(int sig, siginfo_t* siginfo, void* context) {
	// Make sure that we are in the generated code, but we may not have a dex pc.

	#ifdef TEST_NESTED_SIGNAL
	bool in_generated_code = true;
	#else
	bool in_generated_code = manager_->IsInGeneratedCode(siginfo, context, false);
	#endif
	if (in_generated_code) {
	LOG(ERROR) << "Dumping java stack trace for crash in generated code";
	mirror::ArtMethod* method = nullptr;
	uintptr_t return_pc = 0;
	uintptr_t sp = 0;
	Thread* self = Thread::Current();

	manager_->GetMethodAndReturnPcAndSp(siginfo, context, &method, &return_pc, &sp);
	// Inside of generated code, sp[0] is the method, so sp is the frame.
	StackReference<mirror::ArtMethod>* frame =
	reinterpret_cast<StackReference<mirror::ArtMethod>*>(sp);
	self->SetTopOfStack(frame);
	#ifdef TEST_NESTED_SIGNAL
	// To test the nested signal handler we raise a signal here. This will cause the
	// nested signal handler to be called and perform a longjmp back to the setjmp
	// above.
	abort();
	#endif
	self->DumpJavaStack(LOG(ERROR));
	}

	return false; // Return false since we want to propagate the fault to the main signal handler.
	}

	} // namespace art