| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "common_compiler_test.h" |
| |
| #if defined(__arm__) |
| #include <sys/ucontext.h> |
| #endif |
| #include <fstream> |
| |
| #include "class_linker.h" |
| #include "compiled_method.h" |
| #include "dex/quick_compiler_callbacks.h" |
| #include "dex/verification_results.h" |
| #include "dex/quick/dex_file_to_method_inliner_map.h" |
| #include "driver/compiler_driver.h" |
| #include "entrypoints/entrypoint_utils.h" |
| #include "interpreter/interpreter.h" |
| #include "mirror/art_method.h" |
| #include "mirror/dex_cache.h" |
| #include "mirror/object-inl.h" |
| #include "scoped_thread_state_change.h" |
| #include "thread-inl.h" |
| #include "utils.h" |
| |
| namespace art { |
| |
| // Normally the ClassLinker supplies this. |
| extern "C" void art_quick_generic_jni_trampoline(mirror::ArtMethod*); |
| |
| #if defined(__arm__) |
| // A signal handler called when have an illegal instruction. We record the fact in |
| // a global boolean and then increment the PC in the signal context to return to |
| // the next instruction. We know the instruction is an sdiv (4 bytes long). |
| static void baddivideinst(int signo, siginfo *si, void *data) { |
| UNUSED(signo); |
| UNUSED(si); |
| struct ucontext *uc = (struct ucontext *)data; |
| struct sigcontext *sc = &uc->uc_mcontext; |
| sc->arm_r0 = 0; // set R0 to #0 to signal error |
| sc->arm_pc += 4; // skip offending instruction |
| } |
| |
| // This is in arch/arm/arm_sdiv.S. It does the following: |
| // mov r1,#1 |
| // sdiv r0,r1,r1 |
| // bx lr |
| // |
| // the result will be the value 1 if sdiv is supported. If it is not supported |
| // a SIGILL signal will be raised and the signal handler (baddivideinst) called. |
| // The signal handler sets r0 to #0 and then increments pc beyond the failed instruction. |
| // Thus if the instruction is not supported, the result of this function will be #0 |
| |
| extern "C" bool CheckForARMSDIVInstruction(); |
| |
| static InstructionSetFeatures GuessInstructionFeatures() { |
| InstructionSetFeatures f; |
| |
| // Uncomment this for processing of /proc/cpuinfo. |
| if (false) { |
| // Look in /proc/cpuinfo for features we need. Only use this when we can guarantee that |
| // the kernel puts the appropriate feature flags in here. Sometimes it doesn't. |
| std::ifstream in("/proc/cpuinfo"); |
| if (in) { |
| while (!in.eof()) { |
| std::string line; |
| std::getline(in, line); |
| if (!in.eof()) { |
| if (line.find("Features") != std::string::npos) { |
| if (line.find("idivt") != std::string::npos) { |
| f.SetHasDivideInstruction(true); |
| } |
| } |
| } |
| in.close(); |
| } |
| } else { |
| LOG(INFO) << "Failed to open /proc/cpuinfo"; |
| } |
| } |
| |
| // See if have a sdiv instruction. Register a signal handler and try to execute |
| // an sdiv instruction. If we get a SIGILL then it's not supported. We can't use |
| // the /proc/cpuinfo method for this because Krait devices don't always put the idivt |
| // feature in the list. |
| struct sigaction sa, osa; |
| sa.sa_flags = SA_ONSTACK | SA_RESTART | SA_SIGINFO; |
| sa.sa_sigaction = baddivideinst; |
| sigaction(SIGILL, &sa, &osa); |
| |
| if (CheckForARMSDIVInstruction()) { |
| f.SetHasDivideInstruction(true); |
| } |
| |
| // Restore the signal handler. |
| sigaction(SIGILL, &osa, nullptr); |
| |
| // Other feature guesses in here. |
| return f; |
| } |
| #endif |
| |
| // Given a set of instruction features from the build, parse it. The |
| // input 'str' is a comma separated list of feature names. Parse it and |
| // return the InstructionSetFeatures object. |
| static InstructionSetFeatures ParseFeatureList(std::string str) { |
| InstructionSetFeatures result; |
| typedef std::vector<std::string> FeatureList; |
| FeatureList features; |
| Split(str, ',', features); |
| for (FeatureList::iterator i = features.begin(); i != features.end(); i++) { |
| std::string feature = Trim(*i); |
| if (feature == "default") { |
| // Nothing to do. |
| } else if (feature == "div") { |
| // Supports divide instruction. |
| result.SetHasDivideInstruction(true); |
| } else if (feature == "nodiv") { |
| // Turn off support for divide instruction. |
| result.SetHasDivideInstruction(false); |
| } else { |
| LOG(FATAL) << "Unknown instruction set feature: '" << feature << "'"; |
| } |
| } |
| // Others... |
| return result; |
| } |
| |
| CommonCompilerTest::CommonCompilerTest() {} |
| CommonCompilerTest::~CommonCompilerTest() {} |
| |
| OatFile::OatMethod CommonCompilerTest::CreateOatMethod(const void* code, const uint8_t* gc_map) { |
| CHECK(code != nullptr); |
| const byte* base; |
| uint32_t code_offset, gc_map_offset; |
| if (gc_map == nullptr) { |
| base = reinterpret_cast<const byte*>(code); // Base of data points at code. |
| base -= kPointerSize; // Move backward so that code_offset != 0. |
| code_offset = kPointerSize; |
| gc_map_offset = 0; |
| } else { |
| // TODO: 64bit support. |
| base = nullptr; // Base of data in oat file, ie 0. |
| code_offset = PointerToLowMemUInt32(code); |
| gc_map_offset = PointerToLowMemUInt32(gc_map); |
| } |
| return OatFile::OatMethod(base, code_offset, gc_map_offset); |
| } |
| |
| void CommonCompilerTest::MakeExecutable(mirror::ArtMethod* method) { |
| CHECK(method != nullptr); |
| |
| const CompiledMethod* compiled_method = nullptr; |
| if (!method->IsAbstract()) { |
| mirror::DexCache* dex_cache = method->GetDeclaringClass()->GetDexCache(); |
| const DexFile& dex_file = *dex_cache->GetDexFile(); |
| compiled_method = |
| compiler_driver_->GetCompiledMethod(MethodReference(&dex_file, |
| method->GetDexMethodIndex())); |
| } |
| if (compiled_method != nullptr) { |
| const std::vector<uint8_t>* code = compiled_method->GetQuickCode(); |
| const void* code_ptr; |
| if (code != nullptr) { |
| uint32_t code_size = code->size(); |
| CHECK_NE(0u, code_size); |
| const std::vector<uint8_t>& vmap_table = compiled_method->GetVmapTable(); |
| uint32_t vmap_table_offset = vmap_table.empty() ? 0u |
| : sizeof(OatQuickMethodHeader) + vmap_table.size(); |
| const std::vector<uint8_t>& mapping_table = compiled_method->GetMappingTable(); |
| uint32_t mapping_table_offset = mapping_table.empty() ? 0u |
| : sizeof(OatQuickMethodHeader) + vmap_table.size() + mapping_table.size(); |
| OatQuickMethodHeader method_header(mapping_table_offset, vmap_table_offset, |
| compiled_method->GetFrameSizeInBytes(), |
| compiled_method->GetCoreSpillMask(), |
| compiled_method->GetFpSpillMask(), code_size); |
| |
| header_code_and_maps_chunks_.push_back(std::vector<uint8_t>()); |
| std::vector<uint8_t>* chunk = &header_code_and_maps_chunks_.back(); |
| size_t size = sizeof(method_header) + code_size + vmap_table.size() + mapping_table.size(); |
| size_t code_offset = compiled_method->AlignCode(size - code_size); |
| size_t padding = code_offset - (size - code_size); |
| chunk->reserve(padding + size); |
| chunk->resize(sizeof(method_header)); |
| memcpy(&(*chunk)[0], &method_header, sizeof(method_header)); |
| chunk->insert(chunk->begin(), vmap_table.begin(), vmap_table.end()); |
| chunk->insert(chunk->begin(), mapping_table.begin(), mapping_table.end()); |
| chunk->insert(chunk->begin(), padding, 0); |
| chunk->insert(chunk->end(), code->begin(), code->end()); |
| CHECK_EQ(padding + size, chunk->size()); |
| code_ptr = &(*chunk)[code_offset]; |
| } else { |
| code = compiled_method->GetPortableCode(); |
| code_ptr = &(*code)[0]; |
| } |
| MakeExecutable(code_ptr, code->size()); |
| const void* method_code = CompiledMethod::CodePointer(code_ptr, |
| compiled_method->GetInstructionSet()); |
| LOG(INFO) << "MakeExecutable " << PrettyMethod(method) << " code=" << method_code; |
| OatFile::OatMethod oat_method = CreateOatMethod(method_code, nullptr); |
| oat_method.LinkMethod(method); |
| method->SetEntryPointFromInterpreter(artInterpreterToCompiledCodeBridge); |
| } else { |
| // No code? You must mean to go into the interpreter. |
| // Or the generic JNI... |
| if (!method->IsNative()) { |
| const void* method_code = kUsePortableCompiler ? GetPortableToInterpreterBridge() |
| : GetQuickToInterpreterBridge(); |
| OatFile::OatMethod oat_method = CreateOatMethod(method_code, nullptr); |
| oat_method.LinkMethod(method); |
| method->SetEntryPointFromInterpreter(interpreter::artInterpreterToInterpreterBridge); |
| } else { |
| const void* method_code = reinterpret_cast<void*>(art_quick_generic_jni_trampoline); |
| |
| OatFile::OatMethod oat_method = CreateOatMethod(method_code, nullptr); |
| oat_method.LinkMethod(method); |
| method->SetEntryPointFromInterpreter(artInterpreterToCompiledCodeBridge); |
| } |
| } |
| // Create bridges to transition between different kinds of compiled bridge. |
| if (method->GetEntryPointFromPortableCompiledCode() == nullptr) { |
| method->SetEntryPointFromPortableCompiledCode(GetPortableToQuickBridge()); |
| } else { |
| CHECK(method->GetEntryPointFromQuickCompiledCode() == nullptr); |
| method->SetEntryPointFromQuickCompiledCode(GetQuickToPortableBridge()); |
| method->SetIsPortableCompiled(); |
| } |
| } |
| |
| void CommonCompilerTest::MakeExecutable(const void* code_start, size_t code_length) { |
| CHECK(code_start != nullptr); |
| CHECK_NE(code_length, 0U); |
| uintptr_t data = reinterpret_cast<uintptr_t>(code_start); |
| uintptr_t base = RoundDown(data, kPageSize); |
| uintptr_t limit = RoundUp(data + code_length, kPageSize); |
| uintptr_t len = limit - base; |
| int result = mprotect(reinterpret_cast<void*>(base), len, PROT_READ | PROT_WRITE | PROT_EXEC); |
| CHECK_EQ(result, 0); |
| |
| // Flush instruction cache |
| // Only uses __builtin___clear_cache if GCC >= 4.3.3 |
| #if GCC_VERSION >= 40303 |
| __builtin___clear_cache(reinterpret_cast<void*>(base), reinterpret_cast<void*>(base + len)); |
| #else |
| // Only warn if not Intel as Intel doesn't have cache flush instructions. |
| #if !defined(__i386__) && !defined(__x86_64__) |
| LOG(WARNING) << "UNIMPLEMENTED: cache flush"; |
| #endif |
| #endif |
| } |
| |
| void CommonCompilerTest::MakeExecutable(mirror::ClassLoader* class_loader, const char* class_name) { |
| std::string class_descriptor(DotToDescriptor(class_name)); |
| Thread* self = Thread::Current(); |
| StackHandleScope<1> hs(self); |
| Handle<mirror::ClassLoader> loader(hs.NewHandle(class_loader)); |
| mirror::Class* klass = class_linker_->FindClass(self, class_descriptor.c_str(), loader); |
| CHECK(klass != nullptr) << "Class not found " << class_name; |
| for (size_t i = 0; i < klass->NumDirectMethods(); i++) { |
| MakeExecutable(klass->GetDirectMethod(i)); |
| } |
| for (size_t i = 0; i < klass->NumVirtualMethods(); i++) { |
| MakeExecutable(klass->GetVirtualMethod(i)); |
| } |
| } |
| |
| void CommonCompilerTest::SetUp() { |
| CommonRuntimeTest::SetUp(); |
| { |
| ScopedObjectAccess soa(Thread::Current()); |
| |
| InstructionSet instruction_set = kRuntimeISA; |
| |
| // Take the default set of instruction features from the build. |
| InstructionSetFeatures instruction_set_features = |
| ParseFeatureList(Runtime::GetDefaultInstructionSetFeatures()); |
| |
| #if defined(__arm__) |
| InstructionSetFeatures runtime_features = GuessInstructionFeatures(); |
| |
| // for ARM, do a runtime check to make sure that the features we are passed from |
| // the build match the features we actually determine at runtime. |
| ASSERT_LE(instruction_set_features, runtime_features); |
| #endif |
| |
| runtime_->SetInstructionSet(instruction_set); |
| for (int i = 0; i < Runtime::kLastCalleeSaveType; i++) { |
| Runtime::CalleeSaveType type = Runtime::CalleeSaveType(i); |
| if (!runtime_->HasCalleeSaveMethod(type)) { |
| runtime_->SetCalleeSaveMethod( |
| runtime_->CreateCalleeSaveMethod(type), type); |
| } |
| } |
| |
| // TODO: make selectable |
| Compiler::Kind compiler_kind |
| = (kUsePortableCompiler) ? Compiler::kPortable : Compiler::kQuick; |
| timer_.reset(new CumulativeLogger("Compilation times")); |
| compiler_driver_.reset(new CompilerDriver(compiler_options_.get(), |
| verification_results_.get(), |
| method_inliner_map_.get(), |
| compiler_kind, instruction_set, |
| instruction_set_features, |
| true, new std::set<std::string>, |
| 2, true, true, timer_.get())); |
| } |
| // We typically don't generate an image in unit tests, disable this optimization by default. |
| compiler_driver_->SetSupportBootImageFixup(false); |
| } |
| |
| void CommonCompilerTest::SetUpRuntimeOptions(RuntimeOptions* options) { |
| CommonRuntimeTest::SetUpRuntimeOptions(options); |
| |
| compiler_options_.reset(new CompilerOptions); |
| verification_results_.reset(new VerificationResults(compiler_options_.get())); |
| method_inliner_map_.reset(new DexFileToMethodInlinerMap); |
| callbacks_.reset(new QuickCompilerCallbacks(verification_results_.get(), |
| method_inliner_map_.get())); |
| options->push_back(std::make_pair("compilercallbacks", callbacks_.get())); |
| } |
| |
| void CommonCompilerTest::TearDown() { |
| timer_.reset(); |
| compiler_driver_.reset(); |
| callbacks_.reset(); |
| method_inliner_map_.reset(); |
| verification_results_.reset(); |
| compiler_options_.reset(); |
| |
| CommonRuntimeTest::TearDown(); |
| } |
| |
| void CommonCompilerTest::CompileClass(mirror::ClassLoader* class_loader, const char* class_name) { |
| std::string class_descriptor(DotToDescriptor(class_name)); |
| Thread* self = Thread::Current(); |
| StackHandleScope<1> hs(self); |
| Handle<mirror::ClassLoader> loader(hs.NewHandle(class_loader)); |
| mirror::Class* klass = class_linker_->FindClass(self, class_descriptor.c_str(), loader); |
| CHECK(klass != nullptr) << "Class not found " << class_name; |
| for (size_t i = 0; i < klass->NumDirectMethods(); i++) { |
| CompileMethod(klass->GetDirectMethod(i)); |
| } |
| for (size_t i = 0; i < klass->NumVirtualMethods(); i++) { |
| CompileMethod(klass->GetVirtualMethod(i)); |
| } |
| } |
| |
| void CommonCompilerTest::CompileMethod(mirror::ArtMethod* method) { |
| CHECK(method != nullptr); |
| TimingLogger timings("CommonTest::CompileMethod", false, false); |
| TimingLogger::ScopedTiming t(__FUNCTION__, &timings); |
| compiler_driver_->CompileOne(method, &timings); |
| TimingLogger::ScopedTiming t2("MakeExecutable", &timings); |
| MakeExecutable(method); |
| } |
| |
| void CommonCompilerTest::CompileDirectMethod(Handle<mirror::ClassLoader> class_loader, |
| const char* class_name, const char* method_name, |
| const char* signature) { |
| std::string class_descriptor(DotToDescriptor(class_name)); |
| Thread* self = Thread::Current(); |
| mirror::Class* klass = class_linker_->FindClass(self, class_descriptor.c_str(), class_loader); |
| CHECK(klass != nullptr) << "Class not found " << class_name; |
| mirror::ArtMethod* method = klass->FindDirectMethod(method_name, signature); |
| CHECK(method != nullptr) << "Direct method not found: " |
| << class_name << "." << method_name << signature; |
| CompileMethod(method); |
| } |
| |
| void CommonCompilerTest::CompileVirtualMethod(Handle<mirror::ClassLoader> class_loader, const char* class_name, |
| const char* method_name, const char* signature) |
| SHARED_LOCKS_REQUIRED(Locks::mutator_lock_) { |
| std::string class_descriptor(DotToDescriptor(class_name)); |
| Thread* self = Thread::Current(); |
| mirror::Class* klass = class_linker_->FindClass(self, class_descriptor.c_str(), class_loader); |
| CHECK(klass != nullptr) << "Class not found " << class_name; |
| mirror::ArtMethod* method = klass->FindVirtualMethod(method_name, signature); |
| CHECK(method != NULL) << "Virtual method not found: " |
| << class_name << "." << method_name << signature; |
| CompileMethod(method); |
| } |
| |
| void CommonCompilerTest::ReserveImageSpace() { |
| // Reserve where the image will be loaded up front so that other parts of test set up don't |
| // accidentally end up colliding with the fixed memory address when we need to load the image. |
| std::string error_msg; |
| image_reservation_.reset(MemMap::MapAnonymous("image reservation", |
| reinterpret_cast<byte*>(ART_BASE_ADDRESS), |
| (size_t)100 * 1024 * 1024, // 100MB |
| PROT_NONE, |
| false /* no need for 4gb flag with fixed mmap*/, |
| &error_msg)); |
| CHECK(image_reservation_.get() != nullptr) << error_msg; |
| } |
| |
| void CommonCompilerTest::UnreserveImageSpace() { |
| image_reservation_.reset(); |
| } |
| |
| } // namespace art |