| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "thread_list.h" |
| |
| #include <dirent.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include <sstream> |
| #include <vector> |
| |
| #include "android-base/stringprintf.h" |
| #include "backtrace/BacktraceMap.h" |
| #include "nativehelper/scoped_local_ref.h" |
| #include "nativehelper/scoped_utf_chars.h" |
| |
| #include "base/aborting.h" |
| #include "base/histogram-inl.h" |
| #include "base/mutex-inl.h" |
| #include "base/systrace.h" |
| #include "base/time_utils.h" |
| #include "base/timing_logger.h" |
| #include "debugger.h" |
| #include "gc/collector/concurrent_copying.h" |
| #include "gc/gc_pause_listener.h" |
| #include "gc/heap.h" |
| #include "gc/reference_processor.h" |
| #include "gc_root.h" |
| #include "jni/jni_internal.h" |
| #include "lock_word.h" |
| #include "monitor.h" |
| #include "native_stack_dump.h" |
| #include "scoped_thread_state_change-inl.h" |
| #include "thread.h" |
| #include "trace.h" |
| #include "well_known_classes.h" |
| |
| #if ART_USE_FUTEXES |
| #include "linux/futex.h" |
| #include "sys/syscall.h" |
| #ifndef SYS_futex |
| #define SYS_futex __NR_futex |
| #endif |
| #endif // ART_USE_FUTEXES |
| |
| namespace art { |
| |
| using android::base::StringPrintf; |
| |
| static constexpr uint64_t kLongThreadSuspendThreshold = MsToNs(5); |
| // Use 0 since we want to yield to prevent blocking for an unpredictable amount of time. |
| static constexpr useconds_t kThreadSuspendInitialSleepUs = 0; |
| static constexpr useconds_t kThreadSuspendMaxYieldUs = 3000; |
| static constexpr useconds_t kThreadSuspendMaxSleepUs = 5000; |
| |
| // Whether we should try to dump the native stack of unattached threads. See commit ed8b723 for |
| // some history. |
| static constexpr bool kDumpUnattachedThreadNativeStackForSigQuit = true; |
| |
| ThreadList::ThreadList(uint64_t thread_suspend_timeout_ns) |
| : suspend_all_count_(0), |
| unregistering_count_(0), |
| suspend_all_historam_("suspend all histogram", 16, 64), |
| long_suspend_(false), |
| shut_down_(false), |
| thread_suspend_timeout_ns_(thread_suspend_timeout_ns), |
| empty_checkpoint_barrier_(new Barrier(0)) { |
| CHECK(Monitor::IsValidLockWord(LockWord::FromThinLockId(kMaxThreadId, 1, 0U))); |
| } |
| |
| ThreadList::~ThreadList() { |
| CHECK(shut_down_); |
| } |
| |
| void ThreadList::ShutDown() { |
| ScopedTrace trace(__PRETTY_FUNCTION__); |
| // Detach the current thread if necessary. If we failed to start, there might not be any threads. |
| // We need to detach the current thread here in case there's another thread waiting to join with |
| // us. |
| bool contains = false; |
| Thread* self = Thread::Current(); |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| contains = Contains(self); |
| } |
| if (contains) { |
| Runtime::Current()->DetachCurrentThread(); |
| } |
| WaitForOtherNonDaemonThreadsToExit(); |
| // Disable GC and wait for GC to complete in case there are still daemon threads doing |
| // allocations. |
| gc::Heap* const heap = Runtime::Current()->GetHeap(); |
| heap->DisableGCForShutdown(); |
| // In case a GC is in progress, wait for it to finish. |
| heap->WaitForGcToComplete(gc::kGcCauseBackground, Thread::Current()); |
| // TODO: there's an unaddressed race here where a thread may attach during shutdown, see |
| // Thread::Init. |
| SuspendAllDaemonThreadsForShutdown(); |
| |
| shut_down_ = true; |
| } |
| |
| bool ThreadList::Contains(Thread* thread) { |
| return find(list_.begin(), list_.end(), thread) != list_.end(); |
| } |
| |
| bool ThreadList::Contains(pid_t tid) { |
| for (const auto& thread : list_) { |
| if (thread->GetTid() == tid) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| pid_t ThreadList::GetLockOwner() { |
| return Locks::thread_list_lock_->GetExclusiveOwnerTid(); |
| } |
| |
| void ThreadList::DumpNativeStacks(std::ostream& os) { |
| MutexLock mu(Thread::Current(), *Locks::thread_list_lock_); |
| std::unique_ptr<BacktraceMap> map(BacktraceMap::Create(getpid())); |
| for (const auto& thread : list_) { |
| os << "DUMPING THREAD " << thread->GetTid() << "\n"; |
| DumpNativeStack(os, thread->GetTid(), map.get(), "\t"); |
| os << "\n"; |
| } |
| } |
| |
| void ThreadList::DumpForSigQuit(std::ostream& os) { |
| { |
| ScopedObjectAccess soa(Thread::Current()); |
| // Only print if we have samples. |
| if (suspend_all_historam_.SampleSize() > 0) { |
| Histogram<uint64_t>::CumulativeData data; |
| suspend_all_historam_.CreateHistogram(&data); |
| suspend_all_historam_.PrintConfidenceIntervals(os, 0.99, data); // Dump time to suspend. |
| } |
| } |
| bool dump_native_stack = Runtime::Current()->GetDumpNativeStackOnSigQuit(); |
| Dump(os, dump_native_stack); |
| DumpUnattachedThreads(os, dump_native_stack && kDumpUnattachedThreadNativeStackForSigQuit); |
| } |
| |
| static void DumpUnattachedThread(std::ostream& os, pid_t tid, bool dump_native_stack) |
| NO_THREAD_SAFETY_ANALYSIS { |
| // TODO: No thread safety analysis as DumpState with a null thread won't access fields, should |
| // refactor DumpState to avoid skipping analysis. |
| Thread::DumpState(os, nullptr, tid); |
| if (dump_native_stack) { |
| DumpNativeStack(os, tid, nullptr, " native: "); |
| } |
| os << std::endl; |
| } |
| |
| void ThreadList::DumpUnattachedThreads(std::ostream& os, bool dump_native_stack) { |
| DIR* d = opendir("/proc/self/task"); |
| if (!d) { |
| return; |
| } |
| |
| Thread* self = Thread::Current(); |
| dirent* e; |
| while ((e = readdir(d)) != nullptr) { |
| char* end; |
| pid_t tid = strtol(e->d_name, &end, 10); |
| if (!*end) { |
| bool contains; |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| contains = Contains(tid); |
| } |
| if (!contains) { |
| DumpUnattachedThread(os, tid, dump_native_stack); |
| } |
| } |
| } |
| closedir(d); |
| } |
| |
| // Dump checkpoint timeout in milliseconds. Larger amount on the target, since the device could be |
| // overloaded with ANR dumps. |
| static constexpr uint32_t kDumpWaitTimeout = kIsTargetBuild ? 100000 : 20000; |
| |
| // A closure used by Thread::Dump. |
| class DumpCheckpoint final : public Closure { |
| public: |
| DumpCheckpoint(std::ostream* os, bool dump_native_stack) |
| : os_(os), |
| // Avoid verifying count in case a thread doesn't end up passing through the barrier. |
| // This avoids a SIGABRT that would otherwise happen in the destructor. |
| barrier_(0, /*verify_count_on_shutdown=*/false), |
| backtrace_map_(dump_native_stack ? BacktraceMap::Create(getpid()) : nullptr), |
| dump_native_stack_(dump_native_stack) { |
| if (backtrace_map_ != nullptr) { |
| backtrace_map_->SetSuffixesToIgnore(std::vector<std::string> { "oat", "odex" }); |
| } |
| } |
| |
| void Run(Thread* thread) override { |
| // Note thread and self may not be equal if thread was already suspended at the point of the |
| // request. |
| Thread* self = Thread::Current(); |
| CHECK(self != nullptr); |
| std::ostringstream local_os; |
| { |
| ScopedObjectAccess soa(self); |
| thread->Dump(local_os, dump_native_stack_, backtrace_map_.get()); |
| } |
| { |
| // Use the logging lock to ensure serialization when writing to the common ostream. |
| MutexLock mu(self, *Locks::logging_lock_); |
| *os_ << local_os.str() << std::endl; |
| } |
| barrier_.Pass(self); |
| } |
| |
| void WaitForThreadsToRunThroughCheckpoint(size_t threads_running_checkpoint) { |
| Thread* self = Thread::Current(); |
| ScopedThreadStateChange tsc(self, kWaitingForCheckPointsToRun); |
| bool timed_out = barrier_.Increment(self, threads_running_checkpoint, kDumpWaitTimeout); |
| if (timed_out) { |
| // Avoid a recursive abort. |
| LOG((kIsDebugBuild && (gAborting == 0)) ? ::android::base::FATAL : ::android::base::ERROR) |
| << "Unexpected time out during dump checkpoint."; |
| } |
| } |
| |
| private: |
| // The common stream that will accumulate all the dumps. |
| std::ostream* const os_; |
| // The barrier to be passed through and for the requestor to wait upon. |
| Barrier barrier_; |
| // A backtrace map, so that all threads use a shared info and don't reacquire/parse separately. |
| std::unique_ptr<BacktraceMap> backtrace_map_; |
| // Whether we should dump the native stack. |
| const bool dump_native_stack_; |
| }; |
| |
| void ThreadList::Dump(std::ostream& os, bool dump_native_stack) { |
| Thread* self = Thread::Current(); |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| os << "DALVIK THREADS (" << list_.size() << "):\n"; |
| } |
| if (self != nullptr) { |
| DumpCheckpoint checkpoint(&os, dump_native_stack); |
| size_t threads_running_checkpoint; |
| { |
| // Use SOA to prevent deadlocks if multiple threads are calling Dump() at the same time. |
| ScopedObjectAccess soa(self); |
| threads_running_checkpoint = RunCheckpoint(&checkpoint); |
| } |
| if (threads_running_checkpoint != 0) { |
| checkpoint.WaitForThreadsToRunThroughCheckpoint(threads_running_checkpoint); |
| } |
| } else { |
| DumpUnattachedThreads(os, dump_native_stack); |
| } |
| } |
| |
| void ThreadList::AssertThreadsAreSuspended(Thread* self, Thread* ignore1, Thread* ignore2) { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| for (const auto& thread : list_) { |
| if (thread != ignore1 && thread != ignore2) { |
| CHECK(thread->IsSuspended()) |
| << "\nUnsuspended thread: <<" << *thread << "\n" |
| << "self: <<" << *Thread::Current(); |
| } |
| } |
| } |
| |
| #if HAVE_TIMED_RWLOCK |
| // Attempt to rectify locks so that we dump thread list with required locks before exiting. |
| NO_RETURN static void UnsafeLogFatalForThreadSuspendAllTimeout() { |
| // Increment gAborting before doing the thread list dump since we don't want any failures from |
| // AssertThreadSuspensionIsAllowable in cases where thread suspension is not allowed. |
| // See b/69044468. |
| ++gAborting; |
| Runtime* runtime = Runtime::Current(); |
| std::ostringstream ss; |
| ss << "Thread suspend timeout\n"; |
| Locks::mutator_lock_->Dump(ss); |
| ss << "\n"; |
| runtime->GetThreadList()->Dump(ss); |
| --gAborting; |
| LOG(FATAL) << ss.str(); |
| exit(0); |
| } |
| #endif |
| |
| // Unlike suspending all threads where we can wait to acquire the mutator_lock_, suspending an |
| // individual thread requires polling. delay_us is the requested sleep wait. If delay_us is 0 then |
| // we use sched_yield instead of calling usleep. |
| // Although there is the possibility, here and elsewhere, that usleep could return -1 and |
| // errno = EINTR, there should be no problem if interrupted, so we do not check. |
| static void ThreadSuspendSleep(useconds_t delay_us) { |
| if (delay_us == 0) { |
| sched_yield(); |
| } else { |
| usleep(delay_us); |
| } |
| } |
| |
| size_t ThreadList::RunCheckpoint(Closure* checkpoint_function, Closure* callback) { |
| Thread* self = Thread::Current(); |
| Locks::mutator_lock_->AssertNotExclusiveHeld(self); |
| Locks::thread_list_lock_->AssertNotHeld(self); |
| Locks::thread_suspend_count_lock_->AssertNotHeld(self); |
| |
| std::vector<Thread*> suspended_count_modified_threads; |
| size_t count = 0; |
| { |
| // Call a checkpoint function for each thread, threads which are suspend get their checkpoint |
| // manually called. |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| count = list_.size(); |
| for (const auto& thread : list_) { |
| if (thread != self) { |
| bool requested_suspend = false; |
| while (true) { |
| if (thread->RequestCheckpoint(checkpoint_function)) { |
| // This thread will run its checkpoint some time in the near future. |
| if (requested_suspend) { |
| // The suspend request is now unnecessary. |
| bool updated = |
| thread->ModifySuspendCount(self, -1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| requested_suspend = false; |
| } |
| break; |
| } else { |
| // The thread is probably suspended, try to make sure that it stays suspended. |
| if (thread->GetState() == kRunnable) { |
| // Spurious fail, try again. |
| continue; |
| } |
| if (!requested_suspend) { |
| bool updated = |
| thread->ModifySuspendCount(self, +1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| requested_suspend = true; |
| if (thread->IsSuspended()) { |
| break; |
| } |
| // The thread raced us to become Runnable. Try to RequestCheckpoint() again. |
| } else { |
| // The thread previously raced our suspend request to become Runnable but |
| // since it is suspended again, it must honor that suspend request now. |
| DCHECK(thread->IsSuspended()); |
| break; |
| } |
| } |
| } |
| if (requested_suspend) { |
| suspended_count_modified_threads.push_back(thread); |
| } |
| } |
| } |
| // Run the callback to be called inside this critical section. |
| if (callback != nullptr) { |
| callback->Run(self); |
| } |
| } |
| |
| // Run the checkpoint on ourself while we wait for threads to suspend. |
| checkpoint_function->Run(self); |
| |
| // Run the checkpoint on the suspended threads. |
| for (const auto& thread : suspended_count_modified_threads) { |
| // We know for sure that the thread is suspended at this point. |
| DCHECK(thread->IsSuspended()); |
| checkpoint_function->Run(thread); |
| { |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| bool updated = thread->ModifySuspendCount(self, -1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| } |
| } |
| |
| { |
| // Imitate ResumeAll, threads may be waiting on Thread::resume_cond_ since we raised their |
| // suspend count. Now the suspend_count_ is lowered so we must do the broadcast. |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| Thread::resume_cond_->Broadcast(self); |
| } |
| |
| return count; |
| } |
| |
| void ThreadList::RunEmptyCheckpoint() { |
| Thread* self = Thread::Current(); |
| Locks::mutator_lock_->AssertNotExclusiveHeld(self); |
| Locks::thread_list_lock_->AssertNotHeld(self); |
| Locks::thread_suspend_count_lock_->AssertNotHeld(self); |
| std::vector<uint32_t> runnable_thread_ids; |
| size_t count = 0; |
| Barrier* barrier = empty_checkpoint_barrier_.get(); |
| barrier->Init(self, 0); |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| for (Thread* thread : list_) { |
| if (thread != self) { |
| while (true) { |
| if (thread->RequestEmptyCheckpoint()) { |
| // This thread will run an empty checkpoint (decrement the empty checkpoint barrier) |
| // some time in the near future. |
| ++count; |
| if (kIsDebugBuild) { |
| runnable_thread_ids.push_back(thread->GetThreadId()); |
| } |
| break; |
| } |
| if (thread->GetState() != kRunnable) { |
| // It's seen suspended, we are done because it must not be in the middle of a mutator |
| // heap access. |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| // Wake up the threads blocking for weak ref access so that they will respond to the empty |
| // checkpoint request. Otherwise we will hang as they are blocking in the kRunnable state. |
| Runtime::Current()->GetHeap()->GetReferenceProcessor()->BroadcastForSlowPath(self); |
| Runtime::Current()->BroadcastForNewSystemWeaks(/*broadcast_for_checkpoint=*/true); |
| { |
| ScopedThreadStateChange tsc(self, kWaitingForCheckPointsToRun); |
| uint64_t total_wait_time = 0; |
| bool first_iter = true; |
| while (true) { |
| // Wake up the runnable threads blocked on the mutexes that another thread, which is blocked |
| // on a weak ref access, holds (indirectly blocking for weak ref access through another thread |
| // and a mutex.) This needs to be done periodically because the thread may be preempted |
| // between the CheckEmptyCheckpointFromMutex call and the subsequent futex wait in |
| // Mutex::ExclusiveLock, etc. when the wakeup via WakeupToRespondToEmptyCheckpoint |
| // arrives. This could cause a *very rare* deadlock, if not repeated. Most of the cases are |
| // handled in the first iteration. |
| for (BaseMutex* mutex : Locks::expected_mutexes_on_weak_ref_access_) { |
| mutex->WakeupToRespondToEmptyCheckpoint(); |
| } |
| static constexpr uint64_t kEmptyCheckpointPeriodicTimeoutMs = 100; // 100ms |
| static constexpr uint64_t kEmptyCheckpointTotalTimeoutMs = 600 * 1000; // 10 minutes. |
| size_t barrier_count = first_iter ? count : 0; |
| first_iter = false; // Don't add to the barrier count from the second iteration on. |
| bool timed_out = barrier->Increment(self, barrier_count, kEmptyCheckpointPeriodicTimeoutMs); |
| if (!timed_out) { |
| break; // Success |
| } |
| // This is a very rare case. |
| total_wait_time += kEmptyCheckpointPeriodicTimeoutMs; |
| if (kIsDebugBuild && total_wait_time > kEmptyCheckpointTotalTimeoutMs) { |
| std::ostringstream ss; |
| ss << "Empty checkpoint timeout\n"; |
| ss << "Barrier count " << barrier->GetCount(self) << "\n"; |
| ss << "Runnable thread IDs"; |
| for (uint32_t tid : runnable_thread_ids) { |
| ss << " " << tid; |
| } |
| ss << "\n"; |
| Locks::mutator_lock_->Dump(ss); |
| ss << "\n"; |
| LOG(FATAL_WITHOUT_ABORT) << ss.str(); |
| // Some threads in 'runnable_thread_ids' are probably stuck. Try to dump their stacks. |
| // Avoid using ThreadList::Dump() initially because it is likely to get stuck as well. |
| { |
| ScopedObjectAccess soa(self); |
| MutexLock mu1(self, *Locks::thread_list_lock_); |
| for (Thread* thread : GetList()) { |
| uint32_t tid = thread->GetThreadId(); |
| bool is_in_runnable_thread_ids = |
| std::find(runnable_thread_ids.begin(), runnable_thread_ids.end(), tid) != |
| runnable_thread_ids.end(); |
| if (is_in_runnable_thread_ids && |
| thread->ReadFlag(kEmptyCheckpointRequest)) { |
| // Found a runnable thread that hasn't responded to the empty checkpoint request. |
| // Assume it's stuck and safe to dump its stack. |
| thread->Dump(LOG_STREAM(FATAL_WITHOUT_ABORT), |
| /*dump_native_stack=*/ true, |
| /*backtrace_map=*/ nullptr, |
| /*force_dump_stack=*/ true); |
| } |
| } |
| } |
| LOG(FATAL_WITHOUT_ABORT) |
| << "Dumped runnable threads that haven't responded to empty checkpoint."; |
| // Now use ThreadList::Dump() to dump more threads, noting it may get stuck. |
| Dump(LOG_STREAM(FATAL_WITHOUT_ABORT)); |
| LOG(FATAL) << "Dumped all threads."; |
| } |
| } |
| } |
| } |
| |
| // A checkpoint/suspend-all hybrid to switch thread roots from |
| // from-space to to-space refs. Used to synchronize threads at a point |
| // to mark the initiation of marking while maintaining the to-space |
| // invariant. |
| size_t ThreadList::FlipThreadRoots(Closure* thread_flip_visitor, |
| Closure* flip_callback, |
| gc::collector::GarbageCollector* collector, |
| gc::GcPauseListener* pause_listener) { |
| TimingLogger::ScopedTiming split("ThreadListFlip", collector->GetTimings()); |
| Thread* self = Thread::Current(); |
| Locks::mutator_lock_->AssertNotHeld(self); |
| Locks::thread_list_lock_->AssertNotHeld(self); |
| Locks::thread_suspend_count_lock_->AssertNotHeld(self); |
| CHECK_NE(self->GetState(), kRunnable); |
| |
| collector->GetHeap()->ThreadFlipBegin(self); // Sync with JNI critical calls. |
| |
| // ThreadFlipBegin happens before we suspend all the threads, so it does not count towards the |
| // pause. |
| const uint64_t suspend_start_time = NanoTime(); |
| SuspendAllInternal(self, self, nullptr); |
| if (pause_listener != nullptr) { |
| pause_listener->StartPause(); |
| } |
| |
| // Run the flip callback for the collector. |
| Locks::mutator_lock_->ExclusiveLock(self); |
| suspend_all_historam_.AdjustAndAddValue(NanoTime() - suspend_start_time); |
| flip_callback->Run(self); |
| Locks::mutator_lock_->ExclusiveUnlock(self); |
| collector->RegisterPause(NanoTime() - suspend_start_time); |
| if (pause_listener != nullptr) { |
| pause_listener->EndPause(); |
| } |
| |
| // Resume runnable threads. |
| size_t runnable_thread_count = 0; |
| std::vector<Thread*> other_threads; |
| { |
| TimingLogger::ScopedTiming split2("ResumeRunnableThreads", collector->GetTimings()); |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| --suspend_all_count_; |
| for (const auto& thread : list_) { |
| // Set the flip function for all threads because Thread::DumpState/DumpJavaStack() (invoked by |
| // a checkpoint) may cause the flip function to be run for a runnable/suspended thread before |
| // a runnable thread runs it for itself or we run it for a suspended thread below. |
| thread->SetFlipFunction(thread_flip_visitor); |
| if (thread == self) { |
| continue; |
| } |
| // Resume early the threads that were runnable but are suspended just for this thread flip or |
| // about to transition from non-runnable (eg. kNative at the SOA entry in a JNI function) to |
| // runnable (both cases waiting inside Thread::TransitionFromSuspendedToRunnable), or waiting |
| // for the thread flip to end at the JNI critical section entry (kWaitingForGcThreadFlip), |
| ThreadState state = thread->GetState(); |
| if ((state == kWaitingForGcThreadFlip || thread->IsTransitioningToRunnable()) && |
| thread->GetSuspendCount() == 1) { |
| // The thread will resume right after the broadcast. |
| bool updated = thread->ModifySuspendCount(self, -1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| ++runnable_thread_count; |
| } else { |
| other_threads.push_back(thread); |
| } |
| } |
| Thread::resume_cond_->Broadcast(self); |
| } |
| |
| collector->GetHeap()->ThreadFlipEnd(self); |
| |
| // Run the closure on the other threads and let them resume. |
| { |
| TimingLogger::ScopedTiming split3("FlipOtherThreads", collector->GetTimings()); |
| ReaderMutexLock mu(self, *Locks::mutator_lock_); |
| for (const auto& thread : other_threads) { |
| Closure* flip_func = thread->GetFlipFunction(); |
| if (flip_func != nullptr) { |
| flip_func->Run(thread); |
| } |
| } |
| // Run it for self. |
| Closure* flip_func = self->GetFlipFunction(); |
| if (flip_func != nullptr) { |
| flip_func->Run(self); |
| } |
| } |
| |
| // Resume other threads. |
| { |
| TimingLogger::ScopedTiming split4("ResumeOtherThreads", collector->GetTimings()); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| for (const auto& thread : other_threads) { |
| bool updated = thread->ModifySuspendCount(self, -1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| } |
| Thread::resume_cond_->Broadcast(self); |
| } |
| |
| return runnable_thread_count + other_threads.size() + 1; // +1 for self. |
| } |
| |
| void ThreadList::SuspendAll(const char* cause, bool long_suspend) { |
| Thread* self = Thread::Current(); |
| |
| if (self != nullptr) { |
| VLOG(threads) << *self << " SuspendAll for " << cause << " starting..."; |
| } else { |
| VLOG(threads) << "Thread[null] SuspendAll for " << cause << " starting..."; |
| } |
| { |
| ScopedTrace trace("Suspending mutator threads"); |
| const uint64_t start_time = NanoTime(); |
| |
| SuspendAllInternal(self, self); |
| // All threads are known to have suspended (but a thread may still own the mutator lock) |
| // Make sure this thread grabs exclusive access to the mutator lock and its protected data. |
| #if HAVE_TIMED_RWLOCK |
| while (true) { |
| if (Locks::mutator_lock_->ExclusiveLockWithTimeout(self, |
| NsToMs(thread_suspend_timeout_ns_), |
| 0)) { |
| break; |
| } else if (!long_suspend_) { |
| // Reading long_suspend without the mutator lock is slightly racy, in some rare cases, this |
| // could result in a thread suspend timeout. |
| // Timeout if we wait more than thread_suspend_timeout_ns_ nanoseconds. |
| UnsafeLogFatalForThreadSuspendAllTimeout(); |
| } |
| } |
| #else |
| Locks::mutator_lock_->ExclusiveLock(self); |
| #endif |
| |
| long_suspend_ = long_suspend; |
| |
| const uint64_t end_time = NanoTime(); |
| const uint64_t suspend_time = end_time - start_time; |
| suspend_all_historam_.AdjustAndAddValue(suspend_time); |
| if (suspend_time > kLongThreadSuspendThreshold) { |
| LOG(WARNING) << "Suspending all threads took: " << PrettyDuration(suspend_time); |
| } |
| |
| if (kDebugLocking) { |
| // Debug check that all threads are suspended. |
| AssertThreadsAreSuspended(self, self); |
| } |
| } |
| ATraceBegin((std::string("Mutator threads suspended for ") + cause).c_str()); |
| |
| if (self != nullptr) { |
| VLOG(threads) << *self << " SuspendAll complete"; |
| } else { |
| VLOG(threads) << "Thread[null] SuspendAll complete"; |
| } |
| } |
| |
| // Ensures all threads running Java suspend and that those not running Java don't start. |
| void ThreadList::SuspendAllInternal(Thread* self, |
| Thread* ignore1, |
| Thread* ignore2, |
| SuspendReason reason) { |
| Locks::mutator_lock_->AssertNotExclusiveHeld(self); |
| Locks::thread_list_lock_->AssertNotHeld(self); |
| Locks::thread_suspend_count_lock_->AssertNotHeld(self); |
| if (kDebugLocking && self != nullptr) { |
| CHECK_NE(self->GetState(), kRunnable); |
| } |
| |
| // First request that all threads suspend, then wait for them to suspend before |
| // returning. This suspension scheme also relies on other behaviour: |
| // 1. Threads cannot be deleted while they are suspended or have a suspend- |
| // request flag set - (see Unregister() below). |
| // 2. When threads are created, they are created in a suspended state (actually |
| // kNative) and will never begin executing Java code without first checking |
| // the suspend-request flag. |
| |
| // The atomic counter for number of threads that need to pass the barrier. |
| AtomicInteger pending_threads; |
| uint32_t num_ignored = 0; |
| if (ignore1 != nullptr) { |
| ++num_ignored; |
| } |
| if (ignore2 != nullptr && ignore1 != ignore2) { |
| ++num_ignored; |
| } |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| // Update global suspend all state for attaching threads. |
| ++suspend_all_count_; |
| pending_threads.store(list_.size() - num_ignored, std::memory_order_relaxed); |
| // Increment everybody's suspend count (except those that should be ignored). |
| for (const auto& thread : list_) { |
| if (thread == ignore1 || thread == ignore2) { |
| continue; |
| } |
| VLOG(threads) << "requesting thread suspend: " << *thread; |
| bool updated = thread->ModifySuspendCount(self, +1, &pending_threads, reason); |
| DCHECK(updated); |
| |
| // Must install the pending_threads counter first, then check thread->IsSuspend() and clear |
| // the counter. Otherwise there's a race with Thread::TransitionFromRunnableToSuspended() |
| // that can lead a thread to miss a call to PassActiveSuspendBarriers(). |
| if (thread->IsSuspended()) { |
| // Only clear the counter for the current thread. |
| thread->ClearSuspendBarrier(&pending_threads); |
| pending_threads.fetch_sub(1, std::memory_order_seq_cst); |
| } |
| } |
| } |
| |
| // Wait for the barrier to be passed by all runnable threads. This wait |
| // is done with a timeout so that we can detect problems. |
| #if ART_USE_FUTEXES |
| timespec wait_timeout; |
| InitTimeSpec(false, CLOCK_MONOTONIC, NsToMs(thread_suspend_timeout_ns_), 0, &wait_timeout); |
| #endif |
| const uint64_t start_time = NanoTime(); |
| while (true) { |
| int32_t cur_val = pending_threads.load(std::memory_order_relaxed); |
| if (LIKELY(cur_val > 0)) { |
| #if ART_USE_FUTEXES |
| if (futex(pending_threads.Address(), FUTEX_WAIT_PRIVATE, cur_val, &wait_timeout, nullptr, 0) |
| != 0) { |
| if ((errno == EAGAIN) || (errno == EINTR)) { |
| // EAGAIN and EINTR both indicate a spurious failure, try again from the beginning. |
| continue; |
| } |
| if (errno == ETIMEDOUT) { |
| const uint64_t wait_time = NanoTime() - start_time; |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| std::ostringstream oss; |
| for (const auto& thread : list_) { |
| if (thread == ignore1 || thread == ignore2) { |
| continue; |
| } |
| if (!thread->IsSuspended()) { |
| oss << std::endl << "Thread not suspended: " << *thread; |
| } |
| } |
| LOG(kIsDebugBuild ? ::android::base::FATAL : ::android::base::ERROR) |
| << "Timed out waiting for threads to suspend, waited for " |
| << PrettyDuration(wait_time) |
| << oss.str(); |
| } else { |
| PLOG(FATAL) << "futex wait failed for SuspendAllInternal()"; |
| } |
| } // else re-check pending_threads in the next iteration (this may be a spurious wake-up). |
| #else |
| // Spin wait. This is likely to be slow, but on most architecture ART_USE_FUTEXES is set. |
| UNUSED(start_time); |
| #endif |
| } else { |
| CHECK_EQ(cur_val, 0); |
| break; |
| } |
| } |
| } |
| |
| void ThreadList::ResumeAll() { |
| Thread* self = Thread::Current(); |
| |
| if (self != nullptr) { |
| VLOG(threads) << *self << " ResumeAll starting"; |
| } else { |
| VLOG(threads) << "Thread[null] ResumeAll starting"; |
| } |
| |
| ATraceEnd(); |
| |
| ScopedTrace trace("Resuming mutator threads"); |
| |
| if (kDebugLocking) { |
| // Debug check that all threads are suspended. |
| AssertThreadsAreSuspended(self, self); |
| } |
| |
| long_suspend_ = false; |
| |
| Locks::mutator_lock_->ExclusiveUnlock(self); |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| // Update global suspend all state for attaching threads. |
| --suspend_all_count_; |
| // Decrement the suspend counts for all threads. |
| for (const auto& thread : list_) { |
| if (thread == self) { |
| continue; |
| } |
| bool updated = thread->ModifySuspendCount(self, -1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| } |
| |
| // Broadcast a notification to all suspended threads, some or all of |
| // which may choose to wake up. No need to wait for them. |
| if (self != nullptr) { |
| VLOG(threads) << *self << " ResumeAll waking others"; |
| } else { |
| VLOG(threads) << "Thread[null] ResumeAll waking others"; |
| } |
| Thread::resume_cond_->Broadcast(self); |
| } |
| |
| if (self != nullptr) { |
| VLOG(threads) << *self << " ResumeAll complete"; |
| } else { |
| VLOG(threads) << "Thread[null] ResumeAll complete"; |
| } |
| } |
| |
| bool ThreadList::Resume(Thread* thread, SuspendReason reason) { |
| // This assumes there was an ATraceBegin when we suspended the thread. |
| ATraceEnd(); |
| |
| Thread* self = Thread::Current(); |
| DCHECK_NE(thread, self); |
| VLOG(threads) << "Resume(" << reinterpret_cast<void*>(thread) << ") starting..." << reason; |
| |
| { |
| // To check Contains. |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| // To check IsSuspended. |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| if (UNLIKELY(!thread->IsSuspended())) { |
| LOG(ERROR) << "Resume(" << reinterpret_cast<void*>(thread) |
| << ") thread not suspended"; |
| return false; |
| } |
| if (!Contains(thread)) { |
| // We only expect threads within the thread-list to have been suspended otherwise we can't |
| // stop such threads from delete-ing themselves. |
| LOG(ERROR) << "Resume(" << reinterpret_cast<void*>(thread) |
| << ") thread not within thread list"; |
| return false; |
| } |
| if (UNLIKELY(!thread->ModifySuspendCount(self, -1, nullptr, reason))) { |
| LOG(ERROR) << "Resume(" << reinterpret_cast<void*>(thread) |
| << ") could not modify suspend count."; |
| return false; |
| } |
| } |
| |
| { |
| VLOG(threads) << "Resume(" << reinterpret_cast<void*>(thread) << ") waking others"; |
| MutexLock mu(self, *Locks::thread_suspend_count_lock_); |
| Thread::resume_cond_->Broadcast(self); |
| } |
| |
| VLOG(threads) << "Resume(" << reinterpret_cast<void*>(thread) << ") complete"; |
| return true; |
| } |
| |
| static void ThreadSuspendByPeerWarning(Thread* self, |
| LogSeverity severity, |
| const char* message, |
| jobject peer) { |
| JNIEnvExt* env = self->GetJniEnv(); |
| ScopedLocalRef<jstring> |
| scoped_name_string(env, static_cast<jstring>(env->GetObjectField( |
| peer, WellKnownClasses::java_lang_Thread_name))); |
| ScopedUtfChars scoped_name_chars(env, scoped_name_string.get()); |
| if (scoped_name_chars.c_str() == nullptr) { |
| LOG(severity) << message << ": " << peer; |
| env->ExceptionClear(); |
| } else { |
| LOG(severity) << message << ": " << peer << ":" << scoped_name_chars.c_str(); |
| } |
| } |
| |
| Thread* ThreadList::SuspendThreadByPeer(jobject peer, |
| bool request_suspension, |
| SuspendReason reason, |
| bool* timed_out) { |
| const uint64_t start_time = NanoTime(); |
| useconds_t sleep_us = kThreadSuspendInitialSleepUs; |
| *timed_out = false; |
| Thread* const self = Thread::Current(); |
| Thread* suspended_thread = nullptr; |
| VLOG(threads) << "SuspendThreadByPeer starting"; |
| while (true) { |
| Thread* thread; |
| { |
| // Note: this will transition to runnable and potentially suspend. We ensure only one thread |
| // is requesting another suspend, to avoid deadlock, by requiring this function be called |
| // holding Locks::thread_list_suspend_thread_lock_. Its important this thread suspend rather |
| // than request thread suspension, to avoid potential cycles in threads requesting each other |
| // suspend. |
| ScopedObjectAccess soa(self); |
| MutexLock thread_list_mu(self, *Locks::thread_list_lock_); |
| thread = Thread::FromManagedThread(soa, peer); |
| if (thread == nullptr) { |
| if (suspended_thread != nullptr) { |
| MutexLock suspend_count_mu(self, *Locks::thread_suspend_count_lock_); |
| // If we incremented the suspend count but the thread reset its peer, we need to |
| // re-decrement it since it is shutting down and may deadlock the runtime in |
| // ThreadList::WaitForOtherNonDaemonThreadsToExit. |
| bool updated = suspended_thread->ModifySuspendCount(soa.Self(), |
| -1, |
| nullptr, |
| reason); |
| DCHECK(updated); |
| } |
| ThreadSuspendByPeerWarning(self, |
| ::android::base::WARNING, |
| "No such thread for suspend", |
| peer); |
| return nullptr; |
| } |
| if (!Contains(thread)) { |
| CHECK(suspended_thread == nullptr); |
| VLOG(threads) << "SuspendThreadByPeer failed for unattached thread: " |
| << reinterpret_cast<void*>(thread); |
| return nullptr; |
| } |
| VLOG(threads) << "SuspendThreadByPeer found thread: " << *thread; |
| { |
| MutexLock suspend_count_mu(self, *Locks::thread_suspend_count_lock_); |
| if (request_suspension) { |
| if (self->GetSuspendCount() > 0) { |
| // We hold the suspend count lock but another thread is trying to suspend us. Its not |
| // safe to try to suspend another thread in case we get a cycle. Start the loop again |
| // which will allow this thread to be suspended. |
| continue; |
| } |
| CHECK(suspended_thread == nullptr); |
| suspended_thread = thread; |
| bool updated = suspended_thread->ModifySuspendCount(self, +1, nullptr, reason); |
| DCHECK(updated); |
| request_suspension = false; |
| } else { |
| // If the caller isn't requesting suspension, a suspension should have already occurred. |
| CHECK_GT(thread->GetSuspendCount(), 0); |
| } |
| // IsSuspended on the current thread will fail as the current thread is changed into |
| // Runnable above. As the suspend count is now raised if this is the current thread |
| // it will self suspend on transition to Runnable, making it hard to work with. It's simpler |
| // to just explicitly handle the current thread in the callers to this code. |
| CHECK_NE(thread, self) << "Attempt to suspend the current thread for the debugger"; |
| // If thread is suspended (perhaps it was already not Runnable but didn't have a suspend |
| // count, or else we've waited and it has self suspended) or is the current thread, we're |
| // done. |
| if (thread->IsSuspended()) { |
| VLOG(threads) << "SuspendThreadByPeer thread suspended: " << *thread; |
| if (ATraceEnabled()) { |
| std::string name; |
| thread->GetThreadName(name); |
| ATraceBegin(StringPrintf("SuspendThreadByPeer suspended %s for peer=%p", name.c_str(), |
| peer).c_str()); |
| } |
| return thread; |
| } |
| const uint64_t total_delay = NanoTime() - start_time; |
| if (total_delay >= thread_suspend_timeout_ns_) { |
| ThreadSuspendByPeerWarning(self, |
| ::android::base::FATAL, |
| "Thread suspension timed out", |
| peer); |
| if (suspended_thread != nullptr) { |
| CHECK_EQ(suspended_thread, thread); |
| bool updated = suspended_thread->ModifySuspendCount(soa.Self(), |
| -1, |
| nullptr, |
| reason); |
| DCHECK(updated); |
| } |
| *timed_out = true; |
| return nullptr; |
| } else if (sleep_us == 0 && |
| total_delay > static_cast<uint64_t>(kThreadSuspendMaxYieldUs) * 1000) { |
| // We have spun for kThreadSuspendMaxYieldUs time, switch to sleeps to prevent |
| // excessive CPU usage. |
| sleep_us = kThreadSuspendMaxYieldUs / 2; |
| } |
| } |
| // Release locks and come out of runnable state. |
| } |
| VLOG(threads) << "SuspendThreadByPeer waiting to allow thread chance to suspend"; |
| ThreadSuspendSleep(sleep_us); |
| // This may stay at 0 if sleep_us == 0, but this is WAI since we want to avoid using usleep at |
| // all if possible. This shouldn't be an issue since time to suspend should always be small. |
| sleep_us = std::min(sleep_us * 2, kThreadSuspendMaxSleepUs); |
| } |
| } |
| |
| static void ThreadSuspendByThreadIdWarning(LogSeverity severity, |
| const char* message, |
| uint32_t thread_id) { |
| LOG(severity) << StringPrintf("%s: %d", message, thread_id); |
| } |
| |
| Thread* ThreadList::SuspendThreadByThreadId(uint32_t thread_id, |
| SuspendReason reason, |
| bool* timed_out) { |
| const uint64_t start_time = NanoTime(); |
| useconds_t sleep_us = kThreadSuspendInitialSleepUs; |
| *timed_out = false; |
| Thread* suspended_thread = nullptr; |
| Thread* const self = Thread::Current(); |
| CHECK_NE(thread_id, kInvalidThreadId); |
| VLOG(threads) << "SuspendThreadByThreadId starting"; |
| while (true) { |
| { |
| // Note: this will transition to runnable and potentially suspend. We ensure only one thread |
| // is requesting another suspend, to avoid deadlock, by requiring this function be called |
| // holding Locks::thread_list_suspend_thread_lock_. Its important this thread suspend rather |
| // than request thread suspension, to avoid potential cycles in threads requesting each other |
| // suspend. |
| ScopedObjectAccess soa(self); |
| MutexLock thread_list_mu(self, *Locks::thread_list_lock_); |
| Thread* thread = nullptr; |
| for (const auto& it : list_) { |
| if (it->GetThreadId() == thread_id) { |
| thread = it; |
| break; |
| } |
| } |
| if (thread == nullptr) { |
| CHECK(suspended_thread == nullptr) << "Suspended thread " << suspended_thread |
| << " no longer in thread list"; |
| // There's a race in inflating a lock and the owner giving up ownership and then dying. |
| ThreadSuspendByThreadIdWarning(::android::base::WARNING, |
| "No such thread id for suspend", |
| thread_id); |
| return nullptr; |
| } |
| VLOG(threads) << "SuspendThreadByThreadId found thread: " << *thread; |
| DCHECK(Contains(thread)); |
| { |
| MutexLock suspend_count_mu(self, *Locks::thread_suspend_count_lock_); |
| if (suspended_thread == nullptr) { |
| if (self->GetSuspendCount() > 0) { |
| // We hold the suspend count lock but another thread is trying to suspend us. Its not |
| // safe to try to suspend another thread in case we get a cycle. Start the loop again |
| // which will allow this thread to be suspended. |
| continue; |
| } |
| bool updated = thread->ModifySuspendCount(self, +1, nullptr, reason); |
| DCHECK(updated); |
| suspended_thread = thread; |
| } else { |
| CHECK_EQ(suspended_thread, thread); |
| // If the caller isn't requesting suspension, a suspension should have already occurred. |
| CHECK_GT(thread->GetSuspendCount(), 0); |
| } |
| // IsSuspended on the current thread will fail as the current thread is changed into |
| // Runnable above. As the suspend count is now raised if this is the current thread |
| // it will self suspend on transition to Runnable, making it hard to work with. It's simpler |
| // to just explicitly handle the current thread in the callers to this code. |
| CHECK_NE(thread, self) << "Attempt to suspend the current thread for the debugger"; |
| // If thread is suspended (perhaps it was already not Runnable but didn't have a suspend |
| // count, or else we've waited and it has self suspended) or is the current thread, we're |
| // done. |
| if (thread->IsSuspended()) { |
| if (ATraceEnabled()) { |
| std::string name; |
| thread->GetThreadName(name); |
| ATraceBegin(StringPrintf("SuspendThreadByThreadId suspended %s id=%d", |
| name.c_str(), thread_id).c_str()); |
| } |
| VLOG(threads) << "SuspendThreadByThreadId thread suspended: " << *thread; |
| return thread; |
| } |
| const uint64_t total_delay = NanoTime() - start_time; |
| if (total_delay >= thread_suspend_timeout_ns_) { |
| ThreadSuspendByThreadIdWarning(::android::base::WARNING, |
| "Thread suspension timed out", |
| thread_id); |
| if (suspended_thread != nullptr) { |
| bool updated = thread->ModifySuspendCount(soa.Self(), -1, nullptr, reason); |
| DCHECK(updated); |
| } |
| *timed_out = true; |
| return nullptr; |
| } else if (sleep_us == 0 && |
| total_delay > static_cast<uint64_t>(kThreadSuspendMaxYieldUs) * 1000) { |
| // We have spun for kThreadSuspendMaxYieldUs time, switch to sleeps to prevent |
| // excessive CPU usage. |
| sleep_us = kThreadSuspendMaxYieldUs / 2; |
| } |
| } |
| // Release locks and come out of runnable state. |
| } |
| VLOG(threads) << "SuspendThreadByThreadId waiting to allow thread chance to suspend"; |
| ThreadSuspendSleep(sleep_us); |
| sleep_us = std::min(sleep_us * 2, kThreadSuspendMaxSleepUs); |
| } |
| } |
| |
| Thread* ThreadList::FindThreadByThreadId(uint32_t thread_id) { |
| for (const auto& thread : list_) { |
| if (thread->GetThreadId() == thread_id) { |
| return thread; |
| } |
| } |
| return nullptr; |
| } |
| |
| void ThreadList::WaitForOtherNonDaemonThreadsToExit(bool check_no_birth) { |
| ScopedTrace trace(__PRETTY_FUNCTION__); |
| Thread* self = Thread::Current(); |
| Locks::mutator_lock_->AssertNotHeld(self); |
| while (true) { |
| Locks::runtime_shutdown_lock_->Lock(self); |
| if (check_no_birth) { |
| // No more threads can be born after we start to shutdown. |
| CHECK(Runtime::Current()->IsShuttingDownLocked()); |
| CHECK_EQ(Runtime::Current()->NumberOfThreadsBeingBorn(), 0U); |
| } else { |
| if (Runtime::Current()->NumberOfThreadsBeingBorn() != 0U) { |
| // Awkward. Shutdown_cond_ is private, but the only live thread may not be registered yet. |
| // Fortunately, this is used mostly for testing, and not performance-critical. |
| Locks::runtime_shutdown_lock_->Unlock(self); |
| usleep(1000); |
| continue; |
| } |
| } |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| Locks::runtime_shutdown_lock_->Unlock(self); |
| // Also wait for any threads that are unregistering to finish. This is required so that no |
| // threads access the thread list after it is deleted. TODO: This may not work for user daemon |
| // threads since they could unregister at the wrong time. |
| bool done = unregistering_count_ == 0; |
| if (done) { |
| for (const auto& thread : list_) { |
| if (thread != self && !thread->IsDaemon()) { |
| done = false; |
| break; |
| } |
| } |
| } |
| if (done) { |
| break; |
| } |
| // Wait for another thread to exit before re-checking. |
| Locks::thread_exit_cond_->Wait(self); |
| } |
| } |
| |
| void ThreadList::SuspendAllDaemonThreadsForShutdown() { |
| ScopedTrace trace(__PRETTY_FUNCTION__); |
| Thread* self = Thread::Current(); |
| size_t daemons_left = 0; |
| { |
| // Tell all the daemons it's time to suspend. |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| for (const auto& thread : list_) { |
| // This is only run after all non-daemon threads have exited, so the remainder should all be |
| // daemons. |
| CHECK(thread->IsDaemon()) << *thread; |
| if (thread != self) { |
| bool updated = thread->ModifySuspendCount(self, +1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| ++daemons_left; |
| } |
| // We are shutting down the runtime, set the JNI functions of all the JNIEnvs to be |
| // the sleep forever one. |
| thread->GetJniEnv()->SetFunctionsToRuntimeShutdownFunctions(); |
| } |
| } |
| if (daemons_left == 0) { |
| // No threads left; safe to shut down. |
| return; |
| } |
| // There is not a clean way to shut down if we have daemons left. We have no mechanism for |
| // killing them and reclaiming thread stacks. We also have no mechanism for waiting until they |
| // have truly finished touching the memory we are about to deallocate. We do the best we can with |
| // timeouts. |
| // |
| // If we have any daemons left, wait until they are (a) suspended and (b) they are not stuck |
| // in a place where they are about to access runtime state and are not in a runnable state. |
| // We attempt to do the latter by just waiting long enough for things to |
| // quiesce. Examples: Monitor code or waking up from a condition variable. |
| // |
| // Give the threads a chance to suspend, complaining if they're slow. (a) |
| bool have_complained = false; |
| static constexpr size_t kTimeoutMicroseconds = 2000 * 1000; |
| static constexpr size_t kSleepMicroseconds = 1000; |
| bool all_suspended = false; |
| for (size_t i = 0; !all_suspended && i < kTimeoutMicroseconds / kSleepMicroseconds; ++i) { |
| bool found_running = false; |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| for (const auto& thread : list_) { |
| if (thread != self && thread->GetState() == kRunnable) { |
| if (!have_complained) { |
| LOG(WARNING) << "daemon thread not yet suspended: " << *thread; |
| have_complained = true; |
| } |
| found_running = true; |
| } |
| } |
| } |
| if (found_running) { |
| // Sleep briefly before checking again. Max total sleep time is kTimeoutMicroseconds. |
| usleep(kSleepMicroseconds); |
| } else { |
| all_suspended = true; |
| } |
| } |
| if (!all_suspended) { |
| // We can get here if a daemon thread executed a fastnative native call, so that it |
| // remained in runnable state, and then made a JNI call after we called |
| // SetFunctionsToRuntimeShutdownFunctions(), causing it to permanently stay in a harmless |
| // but runnable state. See b/147804269 . |
| LOG(WARNING) << "timed out suspending all daemon threads"; |
| } |
| // Assume all threads are either suspended or somehow wedged. |
| // Wait again for all the now "suspended" threads to actually quiesce. (b) |
| static constexpr size_t kDaemonSleepTime = 400'000; |
| usleep(kDaemonSleepTime); |
| std::list<Thread*> list_copy; |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| // Half-way through the wait, set the "runtime deleted" flag, causing any newly awoken |
| // threads to immediately go back to sleep without touching memory. This prevents us from |
| // touching deallocated memory, but it also prevents mutexes from getting released. Thus we |
| // only do this once we're reasonably sure that no system mutexes are still held. |
| for (const auto& thread : list_) { |
| DCHECK(thread == self || !all_suspended || thread->GetState() != kRunnable); |
| // In the !all_suspended case, the target is probably sleeping. |
| thread->GetJniEnv()->SetRuntimeDeleted(); |
| // Possibly contended Mutex acquisitions are unsafe after this. |
| // Releasing thread_list_lock_ is OK, since it can't block. |
| } |
| } |
| // Finally wait for any threads woken before we set the "runtime deleted" flags to finish |
| // touching memory. |
| usleep(kDaemonSleepTime); |
| #if defined(__has_feature) |
| #if __has_feature(address_sanitizer) || __has_feature(hwaddress_sanitizer) |
| // Sleep a bit longer with -fsanitize=address, since everything is slower. |
| usleep(2 * kDaemonSleepTime); |
| #endif |
| #endif |
| // At this point no threads should be touching our data structures anymore. |
| } |
| |
| void ThreadList::Register(Thread* self) { |
| DCHECK_EQ(self, Thread::Current()); |
| CHECK(!shut_down_); |
| |
| if (VLOG_IS_ON(threads)) { |
| std::ostringstream oss; |
| self->ShortDump(oss); // We don't hold the mutator_lock_ yet and so cannot call Dump. |
| LOG(INFO) << "ThreadList::Register() " << *self << "\n" << oss.str(); |
| } |
| |
| // Atomically add self to the thread list and make its thread_suspend_count_ reflect ongoing |
| // SuspendAll requests. |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| // Modify suspend count in increments of 1 to maintain invariants in ModifySuspendCount. While |
| // this isn't particularly efficient the suspend counts are most commonly 0 or 1. |
| for (int delta = suspend_all_count_; delta > 0; delta--) { |
| bool updated = self->ModifySuspendCount(self, +1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| } |
| CHECK(!Contains(self)); |
| list_.push_back(self); |
| if (kUseReadBarrier) { |
| gc::collector::ConcurrentCopying* const cc = |
| Runtime::Current()->GetHeap()->ConcurrentCopyingCollector(); |
| // Initialize according to the state of the CC collector. |
| self->SetIsGcMarkingAndUpdateEntrypoints(cc->IsMarking()); |
| if (cc->IsUsingReadBarrierEntrypoints()) { |
| self->SetReadBarrierEntrypoints(); |
| } |
| self->SetWeakRefAccessEnabled(cc->IsWeakRefAccessEnabled()); |
| } |
| self->NotifyInTheadList(); |
| } |
| |
| void ThreadList::Unregister(Thread* self) { |
| DCHECK_EQ(self, Thread::Current()); |
| CHECK_NE(self->GetState(), kRunnable); |
| Locks::mutator_lock_->AssertNotHeld(self); |
| |
| VLOG(threads) << "ThreadList::Unregister() " << *self; |
| |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| ++unregistering_count_; |
| } |
| |
| // Any time-consuming destruction, plus anything that can call back into managed code or |
| // suspend and so on, must happen at this point, and not in ~Thread. The self->Destroy is what |
| // causes the threads to join. It is important to do this after incrementing unregistering_count_ |
| // since we want the runtime to wait for the daemon threads to exit before deleting the thread |
| // list. |
| self->Destroy(); |
| |
| // If tracing, remember thread id and name before thread exits. |
| Trace::StoreExitingThreadInfo(self); |
| |
| uint32_t thin_lock_id = self->GetThreadId(); |
| while (true) { |
| // Remove and delete the Thread* while holding the thread_list_lock_ and |
| // thread_suspend_count_lock_ so that the unregistering thread cannot be suspended. |
| // Note: deliberately not using MutexLock that could hold a stale self pointer. |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| if (!Contains(self)) { |
| std::string thread_name; |
| self->GetThreadName(thread_name); |
| std::ostringstream os; |
| DumpNativeStack(os, GetTid(), nullptr, " native: ", nullptr); |
| LOG(ERROR) << "Request to unregister unattached thread " << thread_name << "\n" << os.str(); |
| break; |
| } else { |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| if (!self->IsSuspended()) { |
| list_.remove(self); |
| break; |
| } |
| } |
| } |
| // In the case where we are not suspended yet, sleep to leave other threads time to execute. |
| // This is important if there are realtime threads. b/111277984 |
| usleep(1); |
| // We failed to remove the thread due to a suspend request, loop and try again. |
| } |
| delete self; |
| |
| // Release the thread ID after the thread is finished and deleted to avoid cases where we can |
| // temporarily have multiple threads with the same thread id. When this occurs, it causes |
| // problems in FindThreadByThreadId / SuspendThreadByThreadId. |
| ReleaseThreadId(nullptr, thin_lock_id); |
| |
| // Clear the TLS data, so that the underlying native thread is recognizably detached. |
| // (It may wish to reattach later.) |
| #ifdef __BIONIC__ |
| __get_tls()[TLS_SLOT_ART_THREAD_SELF] = nullptr; |
| #else |
| CHECK_PTHREAD_CALL(pthread_setspecific, (Thread::pthread_key_self_, nullptr), "detach self"); |
| Thread::self_tls_ = nullptr; |
| #endif |
| |
| // Signal that a thread just detached. |
| MutexLock mu(nullptr, *Locks::thread_list_lock_); |
| --unregistering_count_; |
| Locks::thread_exit_cond_->Broadcast(nullptr); |
| } |
| |
| void ThreadList::ForEach(void (*callback)(Thread*, void*), void* context) { |
| for (const auto& thread : list_) { |
| callback(thread, context); |
| } |
| } |
| |
| void ThreadList::VisitRootsForSuspendedThreads(RootVisitor* visitor) { |
| Thread* const self = Thread::Current(); |
| std::vector<Thread*> threads_to_visit; |
| |
| // Tell threads to suspend and copy them into list. |
| { |
| MutexLock mu(self, *Locks::thread_list_lock_); |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| for (Thread* thread : list_) { |
| bool suspended = thread->ModifySuspendCount(self, +1, nullptr, SuspendReason::kInternal); |
| DCHECK(suspended); |
| if (thread == self || thread->IsSuspended()) { |
| threads_to_visit.push_back(thread); |
| } else { |
| bool resumed = thread->ModifySuspendCount(self, -1, nullptr, SuspendReason::kInternal); |
| DCHECK(resumed); |
| } |
| } |
| } |
| |
| // Visit roots without holding thread_list_lock_ and thread_suspend_count_lock_ to prevent lock |
| // order violations. |
| for (Thread* thread : threads_to_visit) { |
| thread->VisitRoots(visitor, kVisitRootFlagAllRoots); |
| } |
| |
| // Restore suspend counts. |
| { |
| MutexLock mu2(self, *Locks::thread_suspend_count_lock_); |
| for (Thread* thread : threads_to_visit) { |
| bool updated = thread->ModifySuspendCount(self, -1, nullptr, SuspendReason::kInternal); |
| DCHECK(updated); |
| } |
| } |
| } |
| |
| void ThreadList::VisitRoots(RootVisitor* visitor, VisitRootFlags flags) const { |
| MutexLock mu(Thread::Current(), *Locks::thread_list_lock_); |
| for (const auto& thread : list_) { |
| thread->VisitRoots(visitor, flags); |
| } |
| } |
| |
| void ThreadList::SweepInterpreterCaches(IsMarkedVisitor* visitor) const { |
| MutexLock mu(Thread::Current(), *Locks::thread_list_lock_); |
| for (const auto& thread : list_) { |
| thread->SweepInterpreterCache(visitor); |
| } |
| } |
| |
| void ThreadList::VisitReflectiveTargets(ReflectiveValueVisitor *visitor) const { |
| MutexLock mu(Thread::Current(), *Locks::thread_list_lock_); |
| for (const auto& thread : list_) { |
| thread->VisitReflectiveTargets(visitor); |
| } |
| } |
| |
| uint32_t ThreadList::AllocThreadId(Thread* self) { |
| MutexLock mu(self, *Locks::allocated_thread_ids_lock_); |
| for (size_t i = 0; i < allocated_ids_.size(); ++i) { |
| if (!allocated_ids_[i]) { |
| allocated_ids_.set(i); |
| return i + 1; // Zero is reserved to mean "invalid". |
| } |
| } |
| LOG(FATAL) << "Out of internal thread ids"; |
| UNREACHABLE(); |
| } |
| |
| void ThreadList::ReleaseThreadId(Thread* self, uint32_t id) { |
| MutexLock mu(self, *Locks::allocated_thread_ids_lock_); |
| --id; // Zero is reserved to mean "invalid". |
| DCHECK(allocated_ids_[id]) << id; |
| allocated_ids_.reset(id); |
| } |
| |
| ScopedSuspendAll::ScopedSuspendAll(const char* cause, bool long_suspend) { |
| Runtime::Current()->GetThreadList()->SuspendAll(cause, long_suspend); |
| } |
| |
| ScopedSuspendAll::~ScopedSuspendAll() { |
| Runtime::Current()->GetThreadList()->ResumeAll(); |
| } |
| |
| } // namespace art |