compiler/dex/compiler_enums.h - platform/art - Gitiles

 /*
  * Copyright (C) 2012 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #ifndef ART_COMPILER_DEX_COMPILER_ENUMS_H_
 #define ART_COMPILER_DEX_COMPILER_ENUMS_H_

 #include "dex_instruction.h"

 namespace art {

 enum RegisterClass {
   kInvalidRegClass,
   kCoreReg,
   kFPReg,
   kRefReg,
   kAnyReg,
 };

 enum BitsUsed {
   kSize32Bits,
   kSize64Bits,
   kSize128Bits,
   kSize256Bits,
   kSize512Bits,
   kSize1024Bits,
 };

 enum SpecialTargetRegister {
   kSelf,            // Thread pointer.
   kSuspend,         // Used to reduce suspend checks for some targets.
   kLr,
   kPc,
   kSp,
   kArg0,
   kArg1,
   kArg2,
   kArg3,
   kArg4,
   kArg5,
   kArg6,
   kArg7,
   kFArg0,
   kFArg1,
   kFArg2,
   kFArg3,
   kFArg4,
   kFArg5,
   kFArg6,
   kFArg7,
   kRet0,
   kRet1,
   kInvokeTgt,
   kHiddenArg,
   kHiddenFpArg,
   kCount
 };

 enum RegLocationType {
   kLocDalvikFrame = 0,  // Normal Dalvik register
   kLocPhysReg,
   kLocCompilerTemp,
   kLocInvalid
 };

 enum BBType {
   kNullBlock,
   kEntryBlock,
   kDalvikByteCode,
   kExitBlock,
   kExceptionHandling,
   kDead,
 };

 // Shared pseudo opcodes - must be < 0.
 enum LIRPseudoOpcode {
   kPseudoExportedPC = -16,
   kPseudoSafepointPC = -15,
   kPseudoIntrinsicRetry = -14,
   kPseudoSuspendTarget = -13,
   kPseudoThrowTarget = -12,
   kPseudoCaseLabel = -11,
   kPseudoMethodEntry = -10,
   kPseudoMethodExit = -9,
   kPseudoBarrier = -8,
   kPseudoEntryBlock = -7,
   kPseudoExitBlock = -6,
   kPseudoTargetLabel = -5,
   kPseudoDalvikByteCodeBoundary = -4,
   kPseudoPseudoAlign4 = -3,
   kPseudoEHBlockLabel = -2,
   kPseudoNormalBlockLabel = -1,
 };

 enum ExtendedMIROpcode {
   kMirOpFirst = kNumPackedOpcodes,
   kMirOpPhi = kMirOpFirst,
   kMirOpCopy,
   kMirOpFusedCmplFloat,
   kMirOpFusedCmpgFloat,
   kMirOpFusedCmplDouble,
   kMirOpFusedCmpgDouble,
   kMirOpFusedCmpLong,
   kMirOpNop,
   kMirOpNullCheck,
   kMirOpRangeCheck,
   kMirOpDivZeroCheck,
   kMirOpCheck,
   kMirOpCheckPart2,
   kMirOpSelect,

   // Vector opcodes:
   // TypeSize is an encoded field giving the element type and the vector size.
   // It is encoded as OpSize << 16 | (number of bits in vector)
   //
   // Destination and source are integers that will be interpreted by the
   // backend that supports Vector operations.  Backends are permitted to support only
   // certain vector register sizes.
   //
   // At this point, only two operand instructions are supported.  Three operand instructions
   // could be supported by using a bit in TypeSize and arg[0] where needed.

   // @brief MIR to move constant data to a vector register
   // vA: destination
   // vB: number of bits in register
   // args[0]~args[3]: up to 128 bits of data for initialization
   kMirOpConstVector,

   // @brief MIR to move a vectorized register to another
   // vA: destination
   // vB: source
   // vC: TypeSize
   kMirOpMoveVector,

   // @brief Packed multiply of units in two vector registers: vB = vB .* vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: source
   // vC: TypeSize
   kMirOpPackedMultiply,

   // @brief Packed addition of units in two vector registers: vB = vB .+ vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: source
   // vC: TypeSize
   kMirOpPackedAddition,

   // @brief Packed subtraction of units in two vector registers: vB = vB .- vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: source
   // vC: TypeSize
   kMirOpPackedSubtract,

   // @brief Packed shift left of units in two vector registers: vB = vB .<< vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: amount to shift
   // vC: TypeSize
   kMirOpPackedShiftLeft,

   // @brief Packed signed shift right of units in two vector registers: vB = vB .>> vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: amount to shift
   // vC: TypeSize
   kMirOpPackedSignedShiftRight,

   // @brief Packed unsigned shift right of units in two vector registers: vB = vB .>>> vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: amount to shift
   // vC: TypeSize
   kMirOpPackedUnsignedShiftRight,

   // @brief Packed bitwise and of units in two vector registers: vB = vB .& vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: source
   // vC: TypeSize
   kMirOpPackedAnd,

   // @brief Packed bitwise or of units in two vector registers: vB = vB .| vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: source
   // vC: TypeSize
   kMirOpPackedOr,

   // @brief Packed bitwise xor of units in two vector registers: vB = vB .^ vC using vA to know the type of the vector.
   // vA: destination and source
   // vB: source
   // vC: TypeSize
   kMirOpPackedXor,

   // @brief Reduce a 128-bit packed element into a single VR by taking lower bits
   // @details Instruction does a horizontal addition of the packed elements and then adds it to VR
   // vA: destination and source VR (not vector register)
   // vB: source (vector register)
   // vC: TypeSize
   kMirOpPackedAddReduce,

   // @brief Extract a packed element into a single VR.
   // vA: destination VR (not vector register)
   // vB: source (vector register)
   // vC: TypeSize
   // arg[0]: The index to use for extraction from vector register (which packed element)
   kMirOpPackedReduce,

   // @brief Create a vector value, with all TypeSize values equal to vC
   // vA: destination vector register
   // vB: source VR (not vector register)
   // vC: TypeSize
   kMirOpPackedSet,

   // @brief Reserve N vector registers (named 0..N-1)
   // vA: Number of registers
   // @note: The backend may choose to map vector numbers used in vector opcodes.
   //  Reserved registers are removed from the list of backend temporary pool.
   kMirOpReserveVectorRegisters,

   // @brief Free Reserved vector registers
   // @note: All currently reserved vector registers are returned to the temporary pool.
   kMirOpReturnVectorRegisters,

   kMirOpLast,
 };

 enum MIROptimizationFlagPositions {
   kMIRIgnoreNullCheck = 0,
   kMIRNullCheckOnly,
   kMIRIgnoreRangeCheck,
   kMIRRangeCheckOnly,
   kMIRIgnoreClInitCheck,
   kMIRInlined,                        // Invoke is inlined (ie dead).
   kMIRInlinedPred,                    // Invoke is inlined via prediction.
   kMIRCallee,                         // Instruction is inlined from callee.
   kMIRIgnoreSuspendCheck,
   kMIRDup,
   kMIRMark,                           // Temporary node mark.
   kMIRLastMIRFlag,
 };

 // For successor_block_list.
 enum BlockListType {
   kNotUsed = 0,
   kCatch,
   kPackedSwitch,
   kSparseSwitch,
 };

 enum AssemblerStatus {
   kSuccess,
   kRetryAll,
 };

 enum OpSize {
   kWord,            // Natural word size of target (32/64).
   k32,
   k64,
   kReference,       // Object reference; compressed on 64-bit targets.
   kSingle,
   kDouble,
   kUnsignedHalf,
   kSignedHalf,
   kUnsignedByte,
   kSignedByte,
 };

 std::ostream& operator<<(std::ostream& os, const OpSize& kind);

 enum OpKind {
   kOpMov,
   kOpCmov,
   kOpMvn,
   kOpCmp,
   kOpLsl,
   kOpLsr,
   kOpAsr,
   kOpRor,
   kOpNot,
   kOpAnd,
   kOpOr,
   kOpXor,
   kOpNeg,
   kOpAdd,
   kOpAdc,
   kOpSub,
   kOpSbc,
   kOpRsub,
   kOpMul,
   kOpDiv,
   kOpRem,
   kOpBic,
   kOpCmn,
   kOpTst,
   kOpRev,
   kOpRevsh,
   kOpBkpt,
   kOpBlx,
   kOpPush,
   kOpPop,
   kOp2Char,
   kOp2Short,
   kOp2Byte,
   kOpCondBr,
   kOpUncondBr,
   kOpBx,
   kOpInvalid,
 };

 enum MoveType {
   kMov8GP,      // Move 8-bit general purpose register.
   kMov16GP,     // Move 16-bit general purpose register.
   kMov32GP,     // Move 32-bit general purpose register.
   kMov64GP,     // Move 64-bit general purpose register.
   kMov32FP,     // Move 32-bit FP register.
   kMov64FP,     // Move 64-bit FP register.
   kMovLo64FP,   // Move low 32-bits of 64-bit FP register.
   kMovHi64FP,   // Move high 32-bits of 64-bit FP register.
   kMovU128FP,   // Move 128-bit FP register to/from possibly unaligned region.
   kMov128FP = kMovU128FP,
   kMovA128FP,   // Move 128-bit FP register to/from region surely aligned to 16-bytes.
   kMovLo128FP,  // Move low 64-bits of 128-bit FP register.
   kMovHi128FP,  // Move high 64-bits of 128-bit FP register.
 };

 std::ostream& operator<<(std::ostream& os, const OpKind& kind);

 enum ConditionCode {
   kCondEq,  // equal
   kCondNe,  // not equal
   kCondCs,  // carry set
   kCondCc,  // carry clear
   kCondUlt,  // unsigned less than
   kCondUge,  // unsigned greater than or same
   kCondMi,  // minus
   kCondPl,  // plus, positive or zero
   kCondVs,  // overflow
   kCondVc,  // no overflow
   kCondHi,  // unsigned greater than
   kCondLs,  // unsigned lower or same
   kCondGe,  // signed greater than or equal
   kCondLt,  // signed less than
   kCondGt,  // signed greater than
   kCondLe,  // signed less than or equal
   kCondAl,  // always
   kCondNv,  // never
 };

 std::ostream& operator<<(std::ostream& os, const ConditionCode& kind);

 // Target specific condition encodings
 enum ArmConditionCode {
   kArmCondEq = 0x0,  // 0000
   kArmCondNe = 0x1,  // 0001
   kArmCondCs = 0x2,  // 0010
   kArmCondCc = 0x3,  // 0011
   kArmCondMi = 0x4,  // 0100
   kArmCondPl = 0x5,  // 0101
   kArmCondVs = 0x6,  // 0110
   kArmCondVc = 0x7,  // 0111
   kArmCondHi = 0x8,  // 1000
   kArmCondLs = 0x9,  // 1001
   kArmCondGe = 0xa,  // 1010
   kArmCondLt = 0xb,  // 1011
   kArmCondGt = 0xc,  // 1100
   kArmCondLe = 0xd,  // 1101
   kArmCondAl = 0xe,  // 1110
   kArmCondNv = 0xf,  // 1111
 };

 std::ostream& operator<<(std::ostream& os, const ArmConditionCode& kind);

 enum X86ConditionCode {
   kX86CondO   = 0x0,    // overflow
   kX86CondNo  = 0x1,    // not overflow

   kX86CondB   = 0x2,    // below
   kX86CondNae = kX86CondB,  // not-above-equal
   kX86CondC   = kX86CondB,  // carry

   kX86CondNb  = 0x3,    // not-below
   kX86CondAe  = kX86CondNb,  // above-equal
   kX86CondNc  = kX86CondNb,  // not-carry

   kX86CondZ   = 0x4,    // zero
   kX86CondEq  = kX86CondZ,  // equal

   kX86CondNz  = 0x5,    // not-zero
   kX86CondNe  = kX86CondNz,  // not-equal

   kX86CondBe  = 0x6,    // below-equal
   kX86CondNa  = kX86CondBe,  // not-above

   kX86CondNbe = 0x7,    // not-below-equal
   kX86CondA   = kX86CondNbe,  // above

   kX86CondS   = 0x8,    // sign
   kX86CondNs  = 0x9,    // not-sign

   kX86CondP   = 0xa,    // 8-bit parity even
   kX86CondPE  = kX86CondP,

   kX86CondNp  = 0xb,    // 8-bit parity odd
   kX86CondPo  = kX86CondNp,

   kX86CondL   = 0xc,    // less-than
   kX86CondNge = kX86CondL,  // not-greater-equal

   kX86CondNl  = 0xd,    // not-less-than
   kX86CondGe  = kX86CondNl,  // not-greater-equal

   kX86CondLe  = 0xe,    // less-than-equal
   kX86CondNg  = kX86CondLe,  // not-greater

   kX86CondNle = 0xf,    // not-less-than
   kX86CondG   = kX86CondNle,  // greater
 };

 std::ostream& operator<<(std::ostream& os, const X86ConditionCode& kind);

 enum DividePattern {
   DivideNone,
   Divide3,
   Divide5,
   Divide7,
 };

 std::ostream& operator<<(std::ostream& os, const DividePattern& pattern);

 /**
  * @brief Memory barrier types (see "The JSR-133 Cookbook for Compiler Writers").
  * @details We define the combined barrier types that are actually required
  * by the Java Memory Model, rather than using exactly the terminology from
  * the JSR-133 cookbook.  These should, in many cases, be replaced by acquire/release
  * primitives.  Note that the JSR-133 cookbook generally does not deal with
  * store atomicity issues, and the recipes there are not always entirely sufficient.
  * The current recipe is as follows:
  * -# Use AnyStore ~= (LoadStore | StoreStore) ~= release barrier before volatile store.
  * -# Use AnyAny barrier after volatile store.  (StoreLoad is as expensive.)
  * -# Use LoadAny barrier ~= (LoadLoad | LoadStore) ~= acquire barrierafter each volatile load.
  * -# Use StoreStore barrier after all stores but before return from any constructor whose
  *    class has final fields.
  */
 enum MemBarrierKind {
   kAnyStore,
   kLoadAny,
   kStoreStore,
   kAnyAny
 };

 std::ostream& operator<<(std::ostream& os, const MemBarrierKind& kind);

 enum OpFeatureFlags {
   kIsBranch = 0,
   kNoOperand,
   kIsUnaryOp,
   kIsBinaryOp,
   kIsTertiaryOp,
   kIsQuadOp,
   kIsQuinOp,
   kIsSextupleOp,
   kIsIT,
   kMemLoad,
   kMemStore,
   kPCRelFixup,  // x86 FIXME: add NEEDS_FIXUP to instruction attributes.
   kRegDef0,
   kRegDef1,
   kRegDef2,
   kRegDefA,
   kRegDefD,
   kRegDefFPCSList0,
   kRegDefFPCSList2,
   kRegDefList0,
   kRegDefList1,
   kRegDefList2,
   kRegDefLR,
   kRegDefSP,
   kRegUse0,
   kRegUse1,
   kRegUse2,
   kRegUse3,
   kRegUse4,
   kRegUseA,
   kRegUseC,
   kRegUseD,
   kRegUseB,
   kRegUseFPCSList0,
   kRegUseFPCSList2,
   kRegUseList0,
   kRegUseList1,
   kRegUseLR,
   kRegUsePC,
   kRegUseSP,
   kSetsCCodes,
   kUsesCCodes,
   kUseFpStack,
   kUseHi,
   kUseLo,
   kDefHi,
   kDefLo
 };

 enum SelectInstructionKind {
   kSelectNone,
   kSelectConst,
   kSelectMove,
   kSelectGoto
 };

 std::ostream& operator<<(std::ostream& os, const SelectInstructionKind& kind);

 // LIR fixup kinds for Arm
 enum FixupKind {
   kFixupNone,
   kFixupLabel,       // For labels we just adjust the offset.
   kFixupLoad,        // Mostly for immediates.
   kFixupVLoad,       // FP load which *may* be pc-relative.
   kFixupCBxZ,        // Cbz, Cbnz.
   kFixupPushPop,     // Not really pc relative, but changes size based on args.
   kFixupCondBranch,  // Conditional branch
   kFixupT1Branch,    // Thumb1 Unconditional branch
   kFixupT2Branch,    // Thumb2 Unconditional branch
   kFixupBlx1,        // Blx1 (start of Blx1/Blx2 pair).
   kFixupBl1,         // Bl1 (start of Bl1/Bl2 pair).
   kFixupAdr,         // Adr.
   kFixupMovImmLST,   // kThumb2MovImm16LST.
   kFixupMovImmHST,   // kThumb2MovImm16HST.
   kFixupAlign4,      // Align to 4-byte boundary.
 };

 std::ostream& operator<<(std::ostream& os, const FixupKind& kind);

 enum VolatileKind {
   kNotVolatile,      // Load/Store is not volatile
   kVolatile          // Load/Store is volatile
 };

 std::ostream& operator<<(std::ostream& os, const VolatileKind& kind);

 enum WideKind {
   kNotWide,      // Non-wide view
   kWide,         // Wide view
   kRef           // Ref width
 };

 std::ostream& operator<<(std::ostream& os, const WideKind& kind);

 }  // namespace art

 #endif  // ART_COMPILER_DEX_COMPILER_ENUMS_H_
	/*
	* Copyright (C) 2012 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#ifndef ART_COMPILER_DEX_COMPILER_ENUMS_H_
	#define ART_COMPILER_DEX_COMPILER_ENUMS_H_

	#include "dex_instruction.h"

	namespace art {

	enum RegisterClass {
	kInvalidRegClass,
	kCoreReg,
	kFPReg,
	kRefReg,
	kAnyReg,
	};

	enum BitsUsed {
	kSize32Bits,
	kSize64Bits,
	kSize128Bits,
	kSize256Bits,
	kSize512Bits,
	kSize1024Bits,
	};

	enum SpecialTargetRegister {
	kSelf, // Thread pointer.
	kSuspend, // Used to reduce suspend checks for some targets.
	kLr,
	kPc,
	kSp,
	kArg0,
	kArg1,
	kArg2,
	kArg3,
	kArg4,
	kArg5,
	kArg6,
	kArg7,
	kFArg0,
	kFArg1,
	kFArg2,
	kFArg3,
	kFArg4,
	kFArg5,
	kFArg6,
	kFArg7,
	kRet0,
	kRet1,
	kInvokeTgt,
	kHiddenArg,
	kHiddenFpArg,
	kCount
	};

	enum RegLocationType {
	kLocDalvikFrame = 0, // Normal Dalvik register
	kLocPhysReg,
	kLocCompilerTemp,
	kLocInvalid
	};

	enum BBType {
	kNullBlock,
	kEntryBlock,
	kDalvikByteCode,
	kExitBlock,
	kExceptionHandling,
	kDead,
	};

	// Shared pseudo opcodes - must be < 0.
	enum LIRPseudoOpcode {
	kPseudoExportedPC = -16,
	kPseudoSafepointPC = -15,
	kPseudoIntrinsicRetry = -14,
	kPseudoSuspendTarget = -13,
	kPseudoThrowTarget = -12,
	kPseudoCaseLabel = -11,
	kPseudoMethodEntry = -10,
	kPseudoMethodExit = -9,
	kPseudoBarrier = -8,
	kPseudoEntryBlock = -7,
	kPseudoExitBlock = -6,
	kPseudoTargetLabel = -5,
	kPseudoDalvikByteCodeBoundary = -4,
	kPseudoPseudoAlign4 = -3,
	kPseudoEHBlockLabel = -2,
	kPseudoNormalBlockLabel = -1,
	};

	enum ExtendedMIROpcode {
	kMirOpFirst = kNumPackedOpcodes,
	kMirOpPhi = kMirOpFirst,
	kMirOpCopy,
	kMirOpFusedCmplFloat,
	kMirOpFusedCmpgFloat,
	kMirOpFusedCmplDouble,
	kMirOpFusedCmpgDouble,
	kMirOpFusedCmpLong,
	kMirOpNop,
	kMirOpNullCheck,
	kMirOpRangeCheck,
	kMirOpDivZeroCheck,
	kMirOpCheck,
	kMirOpCheckPart2,
	kMirOpSelect,

	// Vector opcodes:
	// TypeSize is an encoded field giving the element type and the vector size.
	// It is encoded as OpSize << 16 \| (number of bits in vector)
	//
	// Destination and source are integers that will be interpreted by the
	// backend that supports Vector operations. Backends are permitted to support only
	// certain vector register sizes.
	//
	// At this point, only two operand instructions are supported. Three operand instructions
	// could be supported by using a bit in TypeSize and arg[0] where needed.

	// @brief MIR to move constant data to a vector register
	// vA: destination
	// vB: number of bits in register
	// args[0]~args[3]: up to 128 bits of data for initialization
	kMirOpConstVector,

	// @brief MIR to move a vectorized register to another
	// vA: destination
	// vB: source
	// vC: TypeSize
	kMirOpMoveVector,

	// @brief Packed multiply of units in two vector registers: vB = vB .* vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: source
	// vC: TypeSize
	kMirOpPackedMultiply,

	// @brief Packed addition of units in two vector registers: vB = vB .+ vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: source
	// vC: TypeSize
	kMirOpPackedAddition,

	// @brief Packed subtraction of units in two vector registers: vB = vB .- vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: source
	// vC: TypeSize
	kMirOpPackedSubtract,

	// @brief Packed shift left of units in two vector registers: vB = vB .<< vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: amount to shift
	// vC: TypeSize
	kMirOpPackedShiftLeft,

	// @brief Packed signed shift right of units in two vector registers: vB = vB .>> vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: amount to shift
	// vC: TypeSize
	kMirOpPackedSignedShiftRight,

	// @brief Packed unsigned shift right of units in two vector registers: vB = vB .>>> vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: amount to shift
	// vC: TypeSize
	kMirOpPackedUnsignedShiftRight,

	// @brief Packed bitwise and of units in two vector registers: vB = vB .& vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: source
	// vC: TypeSize
	kMirOpPackedAnd,

	// @brief Packed bitwise or of units in two vector registers: vB = vB .\| vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: source
	// vC: TypeSize
	kMirOpPackedOr,

	// @brief Packed bitwise xor of units in two vector registers: vB = vB .^ vC using vA to know the type of the vector.
	// vA: destination and source
	// vB: source
	// vC: TypeSize
	kMirOpPackedXor,

	// @brief Reduce a 128-bit packed element into a single VR by taking lower bits
	// @details Instruction does a horizontal addition of the packed elements and then adds it to VR
	// vA: destination and source VR (not vector register)
	// vB: source (vector register)
	// vC: TypeSize
	kMirOpPackedAddReduce,

	// @brief Extract a packed element into a single VR.
	// vA: destination VR (not vector register)
	// vB: source (vector register)
	// vC: TypeSize
	// arg[0]: The index to use for extraction from vector register (which packed element)
	kMirOpPackedReduce,

	// @brief Create a vector value, with all TypeSize values equal to vC
	// vA: destination vector register
	// vB: source VR (not vector register)
	// vC: TypeSize
	kMirOpPackedSet,

	// @brief Reserve N vector registers (named 0..N-1)
	// vA: Number of registers
	// @note: The backend may choose to map vector numbers used in vector opcodes.
	// Reserved registers are removed from the list of backend temporary pool.
	kMirOpReserveVectorRegisters,

	// @brief Free Reserved vector registers
	// @note: All currently reserved vector registers are returned to the temporary pool.
	kMirOpReturnVectorRegisters,

	kMirOpLast,
	};

	enum MIROptimizationFlagPositions {
	kMIRIgnoreNullCheck = 0,
	kMIRNullCheckOnly,
	kMIRIgnoreRangeCheck,
	kMIRRangeCheckOnly,
	kMIRIgnoreClInitCheck,
	kMIRInlined, // Invoke is inlined (ie dead).
	kMIRInlinedPred, // Invoke is inlined via prediction.
	kMIRCallee, // Instruction is inlined from callee.
	kMIRIgnoreSuspendCheck,
	kMIRDup,
	kMIRMark, // Temporary node mark.
	kMIRLastMIRFlag,
	};

	// For successor_block_list.
	enum BlockListType {
	kNotUsed = 0,
	kCatch,
	kPackedSwitch,
	kSparseSwitch,
	};

	enum AssemblerStatus {
	kSuccess,
	kRetryAll,
	};

	enum OpSize {
	kWord, // Natural word size of target (32/64).
	k32,
	k64,
	kReference, // Object reference; compressed on 64-bit targets.
	kSingle,
	kDouble,
	kUnsignedHalf,
	kSignedHalf,
	kUnsignedByte,
	kSignedByte,
	};

	std::ostream& operator<<(std::ostream& os, const OpSize& kind);

	enum OpKind {
	kOpMov,
	kOpCmov,
	kOpMvn,
	kOpCmp,
	kOpLsl,
	kOpLsr,
	kOpAsr,
	kOpRor,
	kOpNot,
	kOpAnd,
	kOpOr,
	kOpXor,
	kOpNeg,
	kOpAdd,
	kOpAdc,
	kOpSub,
	kOpSbc,
	kOpRsub,
	kOpMul,
	kOpDiv,
	kOpRem,
	kOpBic,
	kOpCmn,
	kOpTst,
	kOpRev,
	kOpRevsh,
	kOpBkpt,
	kOpBlx,
	kOpPush,
	kOpPop,
	kOp2Char,
	kOp2Short,
	kOp2Byte,
	kOpCondBr,
	kOpUncondBr,
	kOpBx,
	kOpInvalid,
	};

	enum MoveType {
	kMov8GP, // Move 8-bit general purpose register.
	kMov16GP, // Move 16-bit general purpose register.
	kMov32GP, // Move 32-bit general purpose register.
	kMov64GP, // Move 64-bit general purpose register.
	kMov32FP, // Move 32-bit FP register.
	kMov64FP, // Move 64-bit FP register.
	kMovLo64FP, // Move low 32-bits of 64-bit FP register.
	kMovHi64FP, // Move high 32-bits of 64-bit FP register.
	kMovU128FP, // Move 128-bit FP register to/from possibly unaligned region.
	kMov128FP = kMovU128FP,
	kMovA128FP, // Move 128-bit FP register to/from region surely aligned to 16-bytes.
	kMovLo128FP, // Move low 64-bits of 128-bit FP register.
	kMovHi128FP, // Move high 64-bits of 128-bit FP register.
	};

	std::ostream& operator<<(std::ostream& os, const OpKind& kind);

	enum ConditionCode {
	kCondEq, // equal
	kCondNe, // not equal
	kCondCs, // carry set
	kCondCc, // carry clear
	kCondUlt, // unsigned less than
	kCondUge, // unsigned greater than or same
	kCondMi, // minus
	kCondPl, // plus, positive or zero
	kCondVs, // overflow
	kCondVc, // no overflow
	kCondHi, // unsigned greater than
	kCondLs, // unsigned lower or same
	kCondGe, // signed greater than or equal
	kCondLt, // signed less than
	kCondGt, // signed greater than
	kCondLe, // signed less than or equal
	kCondAl, // always
	kCondNv, // never
	};

	std::ostream& operator<<(std::ostream& os, const ConditionCode& kind);

	// Target specific condition encodings
	enum ArmConditionCode {
	kArmCondEq = 0x0, // 0000
	kArmCondNe = 0x1, // 0001
	kArmCondCs = 0x2, // 0010
	kArmCondCc = 0x3, // 0011
	kArmCondMi = 0x4, // 0100
	kArmCondPl = 0x5, // 0101
	kArmCondVs = 0x6, // 0110
	kArmCondVc = 0x7, // 0111
	kArmCondHi = 0x8, // 1000
	kArmCondLs = 0x9, // 1001
	kArmCondGe = 0xa, // 1010
	kArmCondLt = 0xb, // 1011
	kArmCondGt = 0xc, // 1100
	kArmCondLe = 0xd, // 1101
	kArmCondAl = 0xe, // 1110
	kArmCondNv = 0xf, // 1111
	};

	std::ostream& operator<<(std::ostream& os, const ArmConditionCode& kind);

	enum X86ConditionCode {
	kX86CondO = 0x0, // overflow
	kX86CondNo = 0x1, // not overflow

	kX86CondB = 0x2, // below
	kX86CondNae = kX86CondB, // not-above-equal
	kX86CondC = kX86CondB, // carry

	kX86CondNb = 0x3, // not-below
	kX86CondAe = kX86CondNb, // above-equal
	kX86CondNc = kX86CondNb, // not-carry

	kX86CondZ = 0x4, // zero
	kX86CondEq = kX86CondZ, // equal

	kX86CondNz = 0x5, // not-zero
	kX86CondNe = kX86CondNz, // not-equal

	kX86CondBe = 0x6, // below-equal
	kX86CondNa = kX86CondBe, // not-above

	kX86CondNbe = 0x7, // not-below-equal
	kX86CondA = kX86CondNbe, // above

	kX86CondS = 0x8, // sign
	kX86CondNs = 0x9, // not-sign

	kX86CondP = 0xa, // 8-bit parity even
	kX86CondPE = kX86CondP,

	kX86CondNp = 0xb, // 8-bit parity odd
	kX86CondPo = kX86CondNp,

	kX86CondL = 0xc, // less-than
	kX86CondNge = kX86CondL, // not-greater-equal

	kX86CondNl = 0xd, // not-less-than
	kX86CondGe = kX86CondNl, // not-greater-equal

	kX86CondLe = 0xe, // less-than-equal
	kX86CondNg = kX86CondLe, // not-greater

	kX86CondNle = 0xf, // not-less-than
	kX86CondG = kX86CondNle, // greater
	};

	std::ostream& operator<<(std::ostream& os, const X86ConditionCode& kind);

	enum DividePattern {
	DivideNone,
	Divide3,
	Divide5,
	Divide7,
	};

	std::ostream& operator<<(std::ostream& os, const DividePattern& pattern);

	/**
	* @brief Memory barrier types (see "The JSR-133 Cookbook for Compiler Writers").
	* @details We define the combined barrier types that are actually required
	* by the Java Memory Model, rather than using exactly the terminology from
	* the JSR-133 cookbook. These should, in many cases, be replaced by acquire/release
	* primitives. Note that the JSR-133 cookbook generally does not deal with
	* store atomicity issues, and the recipes there are not always entirely sufficient.
	* The current recipe is as follows:
	* -# Use AnyStore ~= (LoadStore \| StoreStore) ~= release barrier before volatile store.
	* -# Use AnyAny barrier after volatile store. (StoreLoad is as expensive.)
	* -# Use LoadAny barrier ~= (LoadLoad \| LoadStore) ~= acquire barrierafter each volatile load.
	* -# Use StoreStore barrier after all stores but before return from any constructor whose
	* class has final fields.
	*/
	enum MemBarrierKind {
	kAnyStore,
	kLoadAny,
	kStoreStore,
	kAnyAny
	};

	std::ostream& operator<<(std::ostream& os, const MemBarrierKind& kind);

	enum OpFeatureFlags {
	kIsBranch = 0,
	kNoOperand,
	kIsUnaryOp,
	kIsBinaryOp,
	kIsTertiaryOp,
	kIsQuadOp,
	kIsQuinOp,
	kIsSextupleOp,
	kIsIT,
	kMemLoad,
	kMemStore,
	kPCRelFixup, // x86 FIXME: add NEEDS_FIXUP to instruction attributes.
	kRegDef0,
	kRegDef1,
	kRegDef2,
	kRegDefA,
	kRegDefD,
	kRegDefFPCSList0,
	kRegDefFPCSList2,
	kRegDefList0,
	kRegDefList1,
	kRegDefList2,
	kRegDefLR,
	kRegDefSP,
	kRegUse0,
	kRegUse1,
	kRegUse2,
	kRegUse3,
	kRegUse4,
	kRegUseA,
	kRegUseC,
	kRegUseD,
	kRegUseB,
	kRegUseFPCSList0,
	kRegUseFPCSList2,
	kRegUseList0,
	kRegUseList1,
	kRegUseLR,
	kRegUsePC,
	kRegUseSP,
	kSetsCCodes,
	kUsesCCodes,
	kUseFpStack,
	kUseHi,
	kUseLo,
	kDefHi,
	kDefLo
	};

	enum SelectInstructionKind {
	kSelectNone,
	kSelectConst,
	kSelectMove,
	kSelectGoto
	};

	std::ostream& operator<<(std::ostream& os, const SelectInstructionKind& kind);

	// LIR fixup kinds for Arm
	enum FixupKind {
	kFixupNone,
	kFixupLabel, // For labels we just adjust the offset.
	kFixupLoad, // Mostly for immediates.
	kFixupVLoad, // FP load which may be pc-relative.
	kFixupCBxZ, // Cbz, Cbnz.
	kFixupPushPop, // Not really pc relative, but changes size based on args.
	kFixupCondBranch, // Conditional branch
	kFixupT1Branch, // Thumb1 Unconditional branch
	kFixupT2Branch, // Thumb2 Unconditional branch
	kFixupBlx1, // Blx1 (start of Blx1/Blx2 pair).
	kFixupBl1, // Bl1 (start of Bl1/Bl2 pair).
	kFixupAdr, // Adr.
	kFixupMovImmLST, // kThumb2MovImm16LST.
	kFixupMovImmHST, // kThumb2MovImm16HST.
	kFixupAlign4, // Align to 4-byte boundary.
	};

	std::ostream& operator<<(std::ostream& os, const FixupKind& kind);

	enum VolatileKind {
	kNotVolatile, // Load/Store is not volatile
	kVolatile // Load/Store is volatile
	};

	std::ostream& operator<<(std::ostream& os, const VolatileKind& kind);

	enum WideKind {
	kNotWide, // Non-wide view
	kWide, // Wide view
	kRef // Ref width
	};

	std::ostream& operator<<(std::ostream& os, const WideKind& kind);

	} // namespace art

	#endif // ART_COMPILER_DEX_COMPILER_ENUMS_H_