| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "Dalvik.h" |
| #include "CompilerInternals.h" |
| #include "Dataflow.h" |
| #include "leb128.h" |
| #include "object.h" |
| #include "runtime.h" |
| |
| namespace art { |
| |
| /* Default optimizer/debug setting for the compiler. */ |
| static uint32_t kCompilerOptimizerDisableFlags = 0 | // Disable specific optimizations |
| //(1 << kLoadStoreElimination) | |
| //(1 << kLoadHoisting) | |
| //(1 << kSuppressLoads) | |
| //(1 << kNullCheckElimination) | |
| //(1 << kPromoteRegs) | |
| //(1 << kTrackLiveTemps) | |
| //(1 << kSkipLargeMethodOptimization) | |
| //(1 << kSafeOptimizations) | |
| //(1 << kBBOpt) | |
| //(1 << kMatch) | |
| //(1 << kPromoteCompilerTemps) | |
| 0; |
| |
| static uint32_t kCompilerDebugFlags = 0 | // Enable debug/testing modes |
| //(1 << kDebugDisplayMissingTargets) | |
| //(1 << kDebugVerbose) | |
| //(1 << kDebugDumpCFG) | |
| //(1 << kDebugSlowFieldPath) | |
| //(1 << kDebugSlowInvokePath) | |
| //(1 << kDebugSlowStringPath) | |
| //(1 << kDebugSlowestFieldPath) | |
| //(1 << kDebugSlowestStringPath) | |
| //(1 << kDebugExerciseResolveMethod) | |
| //(1 << kDebugVerifyDataflow) | |
| //(1 << kDebugShowMemoryUsage) | |
| //(1 << kDebugShowNops) | |
| //(1 << kDebugCountOpcodes) | |
| 0; |
| |
| inline bool contentIsInsn(const u2* codePtr) { |
| u2 instr = *codePtr; |
| Instruction::Code opcode = (Instruction::Code)(instr & 0xff); |
| |
| /* |
| * Since the low 8-bit in metadata may look like NOP, we need to check |
| * both the low and whole sub-word to determine whether it is code or data. |
| */ |
| return (opcode != Instruction::NOP || instr == 0); |
| } |
| |
| /* |
| * Parse an instruction, return the length of the instruction |
| */ |
| inline int parseInsn(CompilationUnit* cUnit, const u2* codePtr, |
| DecodedInstruction* decoded_instruction, bool printMe) |
| { |
| // Don't parse instruction data |
| if (!contentIsInsn(codePtr)) { |
| return 0; |
| } |
| |
| const Instruction* instruction = Instruction::At(codePtr); |
| *decoded_instruction = DecodedInstruction(instruction); |
| |
| if (printMe) { |
| char* decodedString = oatGetDalvikDisassembly(cUnit, *decoded_instruction, |
| NULL); |
| LOG(INFO) << codePtr << ": 0x" |
| << std::hex << static_cast<int>(decoded_instruction->opcode) |
| << " " << decodedString; |
| } |
| return instruction->SizeInCodeUnits(); |
| } |
| |
| #define UNKNOWN_TARGET 0xffffffff |
| |
| inline bool isGoto(MIR* insn) { |
| switch (insn->dalvikInsn.opcode) { |
| case Instruction::GOTO: |
| case Instruction::GOTO_16: |
| case Instruction::GOTO_32: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * Identify unconditional branch instructions |
| */ |
| inline bool isUnconditionalBranch(MIR* insn) { |
| switch (insn->dalvikInsn.opcode) { |
| case Instruction::RETURN_VOID: |
| case Instruction::RETURN: |
| case Instruction::RETURN_WIDE: |
| case Instruction::RETURN_OBJECT: |
| return true; |
| default: |
| return isGoto(insn); |
| } |
| } |
| |
| /* Split an existing block from the specified code offset into two */ |
| BasicBlock *splitBlock(CompilationUnit* cUnit, unsigned int codeOffset, |
| BasicBlock* origBlock, BasicBlock** immedPredBlockP) |
| { |
| MIR* insn = origBlock->firstMIRInsn; |
| while (insn) { |
| if (insn->offset == codeOffset) break; |
| insn = insn->next; |
| } |
| if (insn == NULL) { |
| LOG(FATAL) << "Break split failed"; |
| } |
| BasicBlock *bottomBlock = oatNewBB(cUnit, kDalvikByteCode, |
| cUnit->numBlocks++); |
| oatInsertGrowableList(cUnit, &cUnit->blockList, (intptr_t) bottomBlock); |
| |
| bottomBlock->startOffset = codeOffset; |
| bottomBlock->firstMIRInsn = insn; |
| bottomBlock->lastMIRInsn = origBlock->lastMIRInsn; |
| |
| /* Add it to the quick lookup cache */ |
| cUnit->blockMap.Put(bottomBlock->startOffset, bottomBlock); |
| |
| /* Handle the taken path */ |
| bottomBlock->taken = origBlock->taken; |
| if (bottomBlock->taken) { |
| origBlock->taken = NULL; |
| oatDeleteGrowableList(bottomBlock->taken->predecessors, |
| (intptr_t)origBlock); |
| oatInsertGrowableList(cUnit, bottomBlock->taken->predecessors, |
| (intptr_t)bottomBlock); |
| } |
| |
| /* Handle the fallthrough path */ |
| bottomBlock->needFallThroughBranch = origBlock->needFallThroughBranch; |
| bottomBlock->fallThrough = origBlock->fallThrough; |
| origBlock->fallThrough = bottomBlock; |
| origBlock->needFallThroughBranch = true; |
| oatInsertGrowableList(cUnit, bottomBlock->predecessors, |
| (intptr_t)origBlock); |
| if (bottomBlock->fallThrough) { |
| oatDeleteGrowableList(bottomBlock->fallThrough->predecessors, |
| (intptr_t)origBlock); |
| oatInsertGrowableList(cUnit, bottomBlock->fallThrough->predecessors, |
| (intptr_t)bottomBlock); |
| } |
| |
| /* Handle the successor list */ |
| if (origBlock->successorBlockList.blockListType != kNotUsed) { |
| bottomBlock->successorBlockList = origBlock->successorBlockList; |
| origBlock->successorBlockList.blockListType = kNotUsed; |
| GrowableListIterator iterator; |
| |
| oatGrowableListIteratorInit(&bottomBlock->successorBlockList.blocks, |
| &iterator); |
| while (true) { |
| SuccessorBlockInfo *successorBlockInfo = |
| (SuccessorBlockInfo *) oatGrowableListIteratorNext(&iterator); |
| if (successorBlockInfo == NULL) break; |
| BasicBlock *bb = successorBlockInfo->block; |
| oatDeleteGrowableList(bb->predecessors, (intptr_t)origBlock); |
| oatInsertGrowableList(cUnit, bb->predecessors, (intptr_t)bottomBlock); |
| } |
| } |
| |
| origBlock->lastMIRInsn = insn->prev; |
| |
| insn->prev->next = NULL; |
| insn->prev = NULL; |
| /* |
| * Update the immediate predecessor block pointer so that outgoing edges |
| * can be applied to the proper block. |
| */ |
| if (immedPredBlockP) { |
| DCHECK_EQ(*immedPredBlockP, origBlock); |
| *immedPredBlockP = bottomBlock; |
| } |
| return bottomBlock; |
| } |
| |
| /* |
| * Given a code offset, find out the block that starts with it. If the offset |
| * is in the middle of an existing block, split it into two. If immedPredBlockP |
| * is not non-null and is the block being split, update *immedPredBlockP to |
| * point to the bottom block so that outgoing edges can be set up properly |
| * (by the caller) |
| * Utilizes a map for fast lookup of the typical cases. |
| */ |
| BasicBlock *findBlock(CompilationUnit* cUnit, unsigned int codeOffset, |
| bool split, bool create, BasicBlock** immedPredBlockP) |
| { |
| GrowableList* blockList = &cUnit->blockList; |
| BasicBlock* bb; |
| unsigned int i; |
| SafeMap<unsigned int, BasicBlock*>::iterator it; |
| |
| it = cUnit->blockMap.find(codeOffset); |
| if (it != cUnit->blockMap.end()) { |
| return it->second; |
| } else if (!create) { |
| return NULL; |
| } |
| |
| if (split) { |
| for (i = 0; i < blockList->numUsed; i++) { |
| bb = (BasicBlock *) blockList->elemList[i]; |
| if (bb->blockType != kDalvikByteCode) continue; |
| /* Check if a branch jumps into the middle of an existing block */ |
| if ((codeOffset > bb->startOffset) && (bb->lastMIRInsn != NULL) && |
| (codeOffset <= bb->lastMIRInsn->offset)) { |
| BasicBlock *newBB = splitBlock(cUnit, codeOffset, bb, |
| bb == *immedPredBlockP ? |
| immedPredBlockP : NULL); |
| return newBB; |
| } |
| } |
| } |
| |
| /* Create a new one */ |
| bb = oatNewBB(cUnit, kDalvikByteCode, cUnit->numBlocks++); |
| oatInsertGrowableList(cUnit, &cUnit->blockList, (intptr_t) bb); |
| bb->startOffset = codeOffset; |
| cUnit->blockMap.Put(bb->startOffset, bb); |
| return bb; |
| } |
| |
| /* Dump the CFG into a DOT graph */ |
| void oatDumpCFG(CompilationUnit* cUnit, const char* dirPrefix) |
| { |
| FILE* file; |
| std::string name(PrettyMethod(cUnit->method_idx, *cUnit->dex_file)); |
| char startOffset[80]; |
| sprintf(startOffset, "_%x", cUnit->entryBlock->fallThrough->startOffset); |
| char* fileName = (char*) oatNew(cUnit, strlen(dirPrefix) + |
| name.length() + strlen(".dot") + 1, |
| true, kAllocDebugInfo); |
| sprintf(fileName, "%s%s%s.dot", dirPrefix, name.c_str(), startOffset); |
| |
| /* |
| * Convert the special characters into a filesystem- and shell-friendly |
| * format. |
| */ |
| int i; |
| for (i = strlen(dirPrefix); fileName[i]; i++) { |
| if (fileName[i] == '/') { |
| fileName[i] = '_'; |
| } else if (fileName[i] == ';') { |
| fileName[i] = '#'; |
| } else if (fileName[i] == '$') { |
| fileName[i] = '+'; |
| } else if (fileName[i] == '(' || fileName[i] == ')') { |
| fileName[i] = '@'; |
| } else if (fileName[i] == '<' || fileName[i] == '>') { |
| fileName[i] = '='; |
| } |
| } |
| file = fopen(fileName, "w"); |
| if (file == NULL) { |
| return; |
| } |
| fprintf(file, "digraph G {\n"); |
| |
| fprintf(file, " rankdir=TB\n"); |
| |
| int numReachableBlocks = cUnit->numReachableBlocks; |
| int idx; |
| const GrowableList *blockList = &cUnit->blockList; |
| |
| for (idx = 0; idx < numReachableBlocks; idx++) { |
| int blockIdx = cUnit->dfsOrder.elemList[idx]; |
| BasicBlock *bb = (BasicBlock *) oatGrowableListGetElement(blockList, |
| blockIdx); |
| if (bb == NULL) break; |
| if (bb->blockType == kEntryBlock) { |
| fprintf(file, " entry [shape=Mdiamond];\n"); |
| } else if (bb->blockType == kExitBlock) { |
| fprintf(file, " exit [shape=Mdiamond];\n"); |
| } else if (bb->blockType == kDalvikByteCode) { |
| fprintf(file, " block%04x [shape=record,label = \"{ \\\n", |
| bb->startOffset); |
| const MIR *mir; |
| fprintf(file, " {block id %d\\l}%s\\\n", bb->id, |
| bb->firstMIRInsn ? " | " : " "); |
| for (mir = bb->firstMIRInsn; mir; mir = mir->next) { |
| fprintf(file, " {%04x %s\\l}%s\\\n", mir->offset, |
| mir->ssaRep ? oatFullDisassembler(cUnit, mir) : |
| Instruction::Name(mir->dalvikInsn.opcode), |
| mir->next ? " | " : " "); |
| } |
| fprintf(file, " }\"];\n\n"); |
| } else if (bb->blockType == kExceptionHandling) { |
| char blockName[BLOCK_NAME_LEN]; |
| |
| oatGetBlockName(bb, blockName); |
| fprintf(file, " %s [shape=invhouse];\n", blockName); |
| } |
| |
| char blockName1[BLOCK_NAME_LEN], blockName2[BLOCK_NAME_LEN]; |
| |
| if (bb->taken) { |
| oatGetBlockName(bb, blockName1); |
| oatGetBlockName(bb->taken, blockName2); |
| fprintf(file, " %s:s -> %s:n [style=dotted]\n", |
| blockName1, blockName2); |
| } |
| if (bb->fallThrough) { |
| oatGetBlockName(bb, blockName1); |
| oatGetBlockName(bb->fallThrough, blockName2); |
| fprintf(file, " %s:s -> %s:n\n", blockName1, blockName2); |
| } |
| |
| if (bb->successorBlockList.blockListType != kNotUsed) { |
| fprintf(file, " succ%04x [shape=%s,label = \"{ \\\n", |
| bb->startOffset, |
| (bb->successorBlockList.blockListType == kCatch) ? |
| "Mrecord" : "record"); |
| GrowableListIterator iterator; |
| oatGrowableListIteratorInit(&bb->successorBlockList.blocks, |
| &iterator); |
| SuccessorBlockInfo *successorBlockInfo = |
| (SuccessorBlockInfo *) oatGrowableListIteratorNext(&iterator); |
| |
| int succId = 0; |
| while (true) { |
| if (successorBlockInfo == NULL) break; |
| |
| BasicBlock *destBlock = successorBlockInfo->block; |
| SuccessorBlockInfo *nextSuccessorBlockInfo = |
| (SuccessorBlockInfo *) oatGrowableListIteratorNext(&iterator); |
| |
| fprintf(file, " {<f%d> %04x: %04x\\l}%s\\\n", |
| succId++, |
| successorBlockInfo->key, |
| destBlock->startOffset, |
| (nextSuccessorBlockInfo != NULL) ? " | " : " "); |
| |
| successorBlockInfo = nextSuccessorBlockInfo; |
| } |
| fprintf(file, " }\"];\n\n"); |
| |
| oatGetBlockName(bb, blockName1); |
| fprintf(file, " %s:s -> succ%04x:n [style=dashed]\n", |
| blockName1, bb->startOffset); |
| |
| if (bb->successorBlockList.blockListType == kPackedSwitch || |
| bb->successorBlockList.blockListType == kSparseSwitch) { |
| |
| oatGrowableListIteratorInit(&bb->successorBlockList.blocks, |
| &iterator); |
| |
| succId = 0; |
| while (true) { |
| SuccessorBlockInfo *successorBlockInfo = (SuccessorBlockInfo *) |
| oatGrowableListIteratorNext(&iterator); |
| if (successorBlockInfo == NULL) break; |
| |
| BasicBlock *destBlock = successorBlockInfo->block; |
| |
| oatGetBlockName(destBlock, blockName2); |
| fprintf(file, " succ%04x:f%d:e -> %s:n\n", bb->startOffset, |
| succId++, blockName2); |
| } |
| } |
| } |
| fprintf(file, "\n"); |
| |
| /* Display the dominator tree */ |
| oatGetBlockName(bb, blockName1); |
| fprintf(file, " cfg%s [label=\"%s\", shape=none];\n", |
| blockName1, blockName1); |
| if (bb->iDom) { |
| oatGetBlockName(bb->iDom, blockName2); |
| fprintf(file, " cfg%s:s -> cfg%s:n\n\n", blockName2, blockName1); |
| } |
| } |
| fprintf(file, "}\n"); |
| fclose(file); |
| } |
| |
| /* Verify if all the successor is connected with all the claimed predecessors */ |
| bool verifyPredInfo(CompilationUnit* cUnit, BasicBlock* bb) |
| { |
| GrowableListIterator iter; |
| |
| oatGrowableListIteratorInit(bb->predecessors, &iter); |
| while (true) { |
| BasicBlock *predBB = (BasicBlock*)oatGrowableListIteratorNext(&iter); |
| if (!predBB) break; |
| bool found = false; |
| if (predBB->taken == bb) { |
| found = true; |
| } else if (predBB->fallThrough == bb) { |
| found = true; |
| } else if (predBB->successorBlockList.blockListType != kNotUsed) { |
| GrowableListIterator iterator; |
| oatGrowableListIteratorInit(&predBB->successorBlockList.blocks, |
| &iterator); |
| while (true) { |
| SuccessorBlockInfo *successorBlockInfo = (SuccessorBlockInfo *) |
| oatGrowableListIteratorNext(&iterator); |
| if (successorBlockInfo == NULL) break; |
| BasicBlock *succBB = successorBlockInfo->block; |
| if (succBB == bb) { |
| found = true; |
| break; |
| } |
| } |
| } |
| if (found == false) { |
| char blockName1[BLOCK_NAME_LEN], blockName2[BLOCK_NAME_LEN]; |
| oatGetBlockName(bb, blockName1); |
| oatGetBlockName(predBB, blockName2); |
| oatDumpCFG(cUnit, "/sdcard/cfg/"); |
| LOG(FATAL) << "Successor " << blockName1 << "not found from " |
| << blockName2; |
| } |
| } |
| return true; |
| } |
| |
| /* Identify code range in try blocks and set up the empty catch blocks */ |
| void processTryCatchBlocks(CompilationUnit* cUnit) |
| { |
| const DexFile::CodeItem* code_item = cUnit->code_item; |
| int triesSize = code_item->tries_size_; |
| int offset; |
| |
| if (triesSize == 0) { |
| return; |
| } |
| |
| ArenaBitVector* tryBlockAddr = cUnit->tryBlockAddr; |
| |
| for (int i = 0; i < triesSize; i++) { |
| const DexFile::TryItem* pTry = |
| DexFile::GetTryItems(*code_item, i); |
| int startOffset = pTry->start_addr_; |
| int endOffset = startOffset + pTry->insn_count_; |
| for (offset = startOffset; offset < endOffset; offset++) { |
| oatSetBit(cUnit, tryBlockAddr, offset); |
| } |
| } |
| |
| // Iterate over each of the handlers to enqueue the empty Catch blocks |
| const byte* handlers_ptr = DexFile::GetCatchHandlerData(*code_item, 0); |
| uint32_t handlers_size = DecodeUnsignedLeb128(&handlers_ptr); |
| for (uint32_t idx = 0; idx < handlers_size; idx++) { |
| CatchHandlerIterator iterator(handlers_ptr); |
| for (; iterator.HasNext(); iterator.Next()) { |
| uint32_t address = iterator.GetHandlerAddress(); |
| findBlock(cUnit, address, false /* split */, true /*create*/, |
| /* immedPredBlockP */ NULL); |
| } |
| handlers_ptr = iterator.EndDataPointer(); |
| } |
| } |
| |
| /* Process instructions with the kBranch flag */ |
| BasicBlock* processCanBranch(CompilationUnit* cUnit, BasicBlock* curBlock, |
| MIR* insn, int curOffset, int width, int flags, |
| const u2* codePtr, const u2* codeEnd) |
| { |
| int target = curOffset; |
| switch (insn->dalvikInsn.opcode) { |
| case Instruction::GOTO: |
| case Instruction::GOTO_16: |
| case Instruction::GOTO_32: |
| target += (int) insn->dalvikInsn.vA; |
| break; |
| case Instruction::IF_EQ: |
| case Instruction::IF_NE: |
| case Instruction::IF_LT: |
| case Instruction::IF_GE: |
| case Instruction::IF_GT: |
| case Instruction::IF_LE: |
| target += (int) insn->dalvikInsn.vC; |
| break; |
| case Instruction::IF_EQZ: |
| case Instruction::IF_NEZ: |
| case Instruction::IF_LTZ: |
| case Instruction::IF_GEZ: |
| case Instruction::IF_GTZ: |
| case Instruction::IF_LEZ: |
| target += (int) insn->dalvikInsn.vB; |
| break; |
| default: |
| LOG(FATAL) << "Unexpected opcode(" << (int)insn->dalvikInsn.opcode |
| << ") with kBranch set"; |
| } |
| BasicBlock *takenBlock = findBlock(cUnit, target, |
| /* split */ |
| true, |
| /* create */ |
| true, |
| /* immedPredBlockP */ |
| &curBlock); |
| curBlock->taken = takenBlock; |
| oatInsertGrowableList(cUnit, takenBlock->predecessors, (intptr_t)curBlock); |
| |
| /* Always terminate the current block for conditional branches */ |
| if (flags & Instruction::kContinue) { |
| BasicBlock *fallthroughBlock = findBlock(cUnit, |
| curOffset + width, |
| /* |
| * If the method is processed |
| * in sequential order from the |
| * beginning, we don't need to |
| * specify split for continue |
| * blocks. However, this |
| * routine can be called by |
| * compileLoop, which starts |
| * parsing the method from an |
| * arbitrary address in the |
| * method body. |
| */ |
| true, |
| /* create */ |
| true, |
| /* immedPredBlockP */ |
| &curBlock); |
| curBlock->fallThrough = fallthroughBlock; |
| oatInsertGrowableList(cUnit, fallthroughBlock->predecessors, |
| (intptr_t)curBlock); |
| } else if (codePtr < codeEnd) { |
| /* Create a fallthrough block for real instructions (incl. NOP) */ |
| if (contentIsInsn(codePtr)) { |
| findBlock(cUnit, curOffset + width, |
| /* split */ |
| false, |
| /* create */ |
| true, |
| /* immedPredBlockP */ |
| NULL); |
| } |
| } |
| return curBlock; |
| } |
| |
| /* Process instructions with the kSwitch flag */ |
| void processCanSwitch(CompilationUnit* cUnit, BasicBlock* curBlock, |
| MIR* insn, int curOffset, int width, int flags) |
| { |
| u2* switchData= (u2 *) (cUnit->insns + curOffset + insn->dalvikInsn.vB); |
| int size; |
| int* keyTable; |
| int* targetTable; |
| int i; |
| int firstKey; |
| |
| /* |
| * Packed switch data format: |
| * ushort ident = 0x0100 magic value |
| * ushort size number of entries in the table |
| * int first_key first (and lowest) switch case value |
| * int targets[size] branch targets, relative to switch opcode |
| * |
| * Total size is (4+size*2) 16-bit code units. |
| */ |
| if (insn->dalvikInsn.opcode == Instruction::PACKED_SWITCH) { |
| DCHECK_EQ(static_cast<int>(switchData[0]), |
| static_cast<int>(Instruction::kPackedSwitchSignature)); |
| size = switchData[1]; |
| firstKey = switchData[2] | (switchData[3] << 16); |
| targetTable = (int *) &switchData[4]; |
| keyTable = NULL; // Make the compiler happy |
| /* |
| * Sparse switch data format: |
| * ushort ident = 0x0200 magic value |
| * ushort size number of entries in the table; > 0 |
| * int keys[size] keys, sorted low-to-high; 32-bit aligned |
| * int targets[size] branch targets, relative to switch opcode |
| * |
| * Total size is (2+size*4) 16-bit code units. |
| */ |
| } else { |
| DCHECK_EQ(static_cast<int>(switchData[0]), |
| static_cast<int>(Instruction::kSparseSwitchSignature)); |
| size = switchData[1]; |
| keyTable = (int *) &switchData[2]; |
| targetTable = (int *) &switchData[2 + size*2]; |
| firstKey = 0; // To make the compiler happy |
| } |
| |
| if (curBlock->successorBlockList.blockListType != kNotUsed) { |
| LOG(FATAL) << "Successor block list already in use: " |
| << (int)curBlock->successorBlockList.blockListType; |
| } |
| curBlock->successorBlockList.blockListType = |
| (insn->dalvikInsn.opcode == Instruction::PACKED_SWITCH) ? |
| kPackedSwitch : kSparseSwitch; |
| oatInitGrowableList(cUnit, &curBlock->successorBlockList.blocks, size, |
| kListSuccessorBlocks); |
| |
| for (i = 0; i < size; i++) { |
| BasicBlock *caseBlock = findBlock(cUnit, curOffset + targetTable[i], |
| /* split */ |
| true, |
| /* create */ |
| true, |
| /* immedPredBlockP */ |
| &curBlock); |
| SuccessorBlockInfo *successorBlockInfo = |
| (SuccessorBlockInfo *) oatNew(cUnit, sizeof(SuccessorBlockInfo), |
| false, kAllocSuccessor); |
| successorBlockInfo->block = caseBlock; |
| successorBlockInfo->key = |
| (insn->dalvikInsn.opcode == Instruction::PACKED_SWITCH) ? |
| firstKey + i : keyTable[i]; |
| oatInsertGrowableList(cUnit, &curBlock->successorBlockList.blocks, |
| (intptr_t) successorBlockInfo); |
| oatInsertGrowableList(cUnit, caseBlock->predecessors, |
| (intptr_t)curBlock); |
| } |
| |
| /* Fall-through case */ |
| BasicBlock* fallthroughBlock = findBlock(cUnit, |
| curOffset + width, |
| /* split */ |
| false, |
| /* create */ |
| true, |
| /* immedPredBlockP */ |
| NULL); |
| curBlock->fallThrough = fallthroughBlock; |
| oatInsertGrowableList(cUnit, fallthroughBlock->predecessors, |
| (intptr_t)curBlock); |
| } |
| |
| /* Process instructions with the kThrow flag */ |
| void processCanThrow(CompilationUnit* cUnit, BasicBlock* curBlock, MIR* insn, |
| int curOffset, int width, int flags, |
| ArenaBitVector* tryBlockAddr, const u2* codePtr, |
| const u2* codeEnd) |
| { |
| const DexFile::CodeItem* code_item = cUnit->code_item; |
| |
| /* In try block */ |
| if (oatIsBitSet(tryBlockAddr, curOffset)) { |
| CatchHandlerIterator iterator(*code_item, curOffset); |
| |
| if (curBlock->successorBlockList.blockListType != kNotUsed) { |
| LOG(FATAL) << "Successor block list already in use: " |
| << (int)curBlock->successorBlockList.blockListType; |
| } |
| |
| curBlock->successorBlockList.blockListType = kCatch; |
| oatInitGrowableList(cUnit, &curBlock->successorBlockList.blocks, 2, |
| kListSuccessorBlocks); |
| |
| for (;iterator.HasNext(); iterator.Next()) { |
| BasicBlock *catchBlock = findBlock(cUnit, iterator.GetHandlerAddress(), |
| false /* split*/, |
| false /* creat */, |
| NULL /* immedPredBlockP */); |
| catchBlock->catchEntry = true; |
| SuccessorBlockInfo *successorBlockInfo = (SuccessorBlockInfo *) |
| oatNew(cUnit, sizeof(SuccessorBlockInfo), false, kAllocSuccessor); |
| successorBlockInfo->block = catchBlock; |
| successorBlockInfo->key = iterator.GetHandlerTypeIndex(); |
| oatInsertGrowableList(cUnit, &curBlock->successorBlockList.blocks, |
| (intptr_t) successorBlockInfo); |
| oatInsertGrowableList(cUnit, catchBlock->predecessors, |
| (intptr_t)curBlock); |
| } |
| } else { |
| BasicBlock *ehBlock = oatNewBB(cUnit, kExceptionHandling, |
| cUnit->numBlocks++); |
| curBlock->taken = ehBlock; |
| oatInsertGrowableList(cUnit, &cUnit->blockList, (intptr_t) ehBlock); |
| ehBlock->startOffset = curOffset; |
| oatInsertGrowableList(cUnit, ehBlock->predecessors, (intptr_t)curBlock); |
| } |
| |
| /* |
| * Force the current block to terminate. |
| * |
| * Data may be present before codeEnd, so we need to parse it to know |
| * whether it is code or data. |
| */ |
| if (codePtr < codeEnd) { |
| /* Create a fallthrough block for real instructions (incl. NOP) */ |
| if (contentIsInsn(codePtr)) { |
| BasicBlock *fallthroughBlock = findBlock(cUnit, |
| curOffset + width, |
| /* split */ |
| false, |
| /* create */ |
| true, |
| /* immedPredBlockP */ |
| NULL); |
| /* |
| * THROW is an unconditional branch. NOTE: |
| * THROW_VERIFICATION_ERROR is also an unconditional |
| * branch, but we shouldn't treat it as such until we have |
| * a dead code elimination pass (which won't be important |
| * until inlining w/ constant propogation is implemented. |
| */ |
| if (insn->dalvikInsn.opcode != Instruction::THROW) { |
| curBlock->fallThrough = fallthroughBlock; |
| oatInsertGrowableList(cUnit, fallthroughBlock->predecessors, |
| (intptr_t)curBlock); |
| } |
| } |
| } |
| } |
| |
| void oatInit(CompilationUnit* cUnit, const Compiler& compiler) { |
| if (!oatArchInit()) { |
| LOG(FATAL) << "Failed to initialize oat"; |
| } |
| if (!oatHeapInit(cUnit)) { |
| LOG(FATAL) << "Failed to initialize oat heap"; |
| } |
| } |
| |
| CompiledMethod* oatCompileMethod(Compiler& compiler, |
| const DexFile::CodeItem* code_item, |
| uint32_t access_flags, uint32_t method_idx, |
| const ClassLoader* class_loader, |
| const DexFile& dex_file) |
| { |
| VLOG(compiler) << "Compiling " << PrettyMethod(method_idx, dex_file) << "..."; |
| |
| const u2* codePtr = code_item->insns_; |
| const u2* codeEnd = code_item->insns_ + code_item->insns_size_in_code_units_; |
| int numBlocks = 0; |
| unsigned int curOffset = 0; |
| |
| ClassLinker* class_linker = Runtime::Current()->GetClassLinker(); |
| UniquePtr<CompilationUnit> cUnit(new CompilationUnit); |
| |
| oatInit(cUnit.get(), compiler); |
| |
| cUnit->compiler = &compiler; |
| cUnit->class_linker = class_linker; |
| cUnit->dex_file = &dex_file; |
| cUnit->dex_cache = class_linker->FindDexCache(dex_file); |
| cUnit->method_idx = method_idx; |
| cUnit->code_item = code_item; |
| cUnit->access_flags = access_flags; |
| cUnit->shorty = dex_file.GetMethodShorty(dex_file.GetMethodId(method_idx)); |
| cUnit->instructionSet = compiler.GetInstructionSet(); |
| cUnit->insns = code_item->insns_; |
| cUnit->insnsSize = code_item->insns_size_in_code_units_; |
| cUnit->numIns = code_item->ins_size_; |
| cUnit->numRegs = code_item->registers_size_ - cUnit->numIns; |
| cUnit->numOuts = code_item->outs_size_; |
| /* Adjust this value accordingly once inlining is performed */ |
| cUnit->numDalvikRegisters = code_item->registers_size_; |
| // TODO: set this from command line |
| cUnit->compilerFlipMatch = false; |
| bool useMatch = !cUnit->compilerMethodMatch.empty(); |
| bool match = useMatch && (cUnit->compilerFlipMatch ^ |
| (PrettyMethod(method_idx, dex_file).find(cUnit->compilerMethodMatch) != |
| std::string::npos)); |
| if (!useMatch || match) { |
| cUnit->disableOpt = kCompilerOptimizerDisableFlags; |
| cUnit->enableDebug = kCompilerDebugFlags; |
| cUnit->printMe = VLOG_IS_ON(compiler) || |
| (cUnit->enableDebug & (1 << kDebugVerbose)); |
| } |
| if (cUnit->instructionSet == kX86) { |
| // Disable optimizations on X86 for now |
| cUnit->disableOpt = -1; |
| } |
| /* Are we generating code for the debugger? */ |
| if (compiler.IsDebuggingSupported()) { |
| cUnit->genDebugger = true; |
| // Yes, disable most optimizations |
| cUnit->disableOpt |= ( |
| (1 << kLoadStoreElimination) | |
| (1 << kLoadHoisting) | |
| (1 << kSuppressLoads) | |
| (1 << kPromoteRegs) | |
| (1 << kBBOpt) | |
| (1 << kMatch) | |
| (1 << kTrackLiveTemps)); |
| } |
| |
| /* Gathering opcode stats? */ |
| if (kCompilerDebugFlags & (1 << kDebugCountOpcodes)) { |
| cUnit->opcodeCount = (int*)oatNew(cUnit.get(), |
| kNumPackedOpcodes * sizeof(int), true, kAllocMisc); |
| } |
| |
| /* Assume non-throwing leaf */ |
| cUnit->attrs = (METHOD_IS_LEAF | METHOD_IS_THROW_FREE); |
| |
| /* Initialize the block list, estimate size based on insnsSize */ |
| oatInitGrowableList(cUnit.get(), &cUnit->blockList, cUnit->insnsSize, |
| kListBlockList); |
| |
| /* Initialize the switchTables list */ |
| oatInitGrowableList(cUnit.get(), &cUnit->switchTables, 4, |
| kListSwitchTables); |
| |
| /* Intialize the fillArrayData list */ |
| oatInitGrowableList(cUnit.get(), &cUnit->fillArrayData, 4, |
| kListFillArrayData); |
| |
| /* Intialize the throwLaunchpads list, estimate size based on insnsSize */ |
| oatInitGrowableList(cUnit.get(), &cUnit->throwLaunchpads, cUnit->insnsSize, |
| kListThrowLaunchPads); |
| |
| /* Intialize the instrinsicLaunchpads list */ |
| oatInitGrowableList(cUnit.get(), &cUnit->intrinsicLaunchpads, 4, |
| kListMisc); |
| |
| |
| /* Intialize the suspendLaunchpads list */ |
| oatInitGrowableList(cUnit.get(), &cUnit->suspendLaunchpads, 2048, |
| kListSuspendLaunchPads); |
| |
| /* Allocate the bit-vector to track the beginning of basic blocks */ |
| ArenaBitVector *tryBlockAddr = oatAllocBitVector(cUnit.get(), |
| cUnit->insnsSize, |
| true /* expandable */); |
| cUnit->tryBlockAddr = tryBlockAddr; |
| |
| /* Create the default entry and exit blocks and enter them to the list */ |
| BasicBlock *entryBlock = oatNewBB(cUnit.get(), kEntryBlock, numBlocks++); |
| BasicBlock *exitBlock = oatNewBB(cUnit.get(), kExitBlock, numBlocks++); |
| |
| cUnit->entryBlock = entryBlock; |
| cUnit->exitBlock = exitBlock; |
| |
| oatInsertGrowableList(cUnit.get(), &cUnit->blockList, (intptr_t) entryBlock); |
| oatInsertGrowableList(cUnit.get(), &cUnit->blockList, (intptr_t) exitBlock); |
| |
| /* Current block to record parsed instructions */ |
| BasicBlock *curBlock = oatNewBB(cUnit.get(), kDalvikByteCode, numBlocks++); |
| curBlock->startOffset = 0; |
| oatInsertGrowableList(cUnit.get(), &cUnit->blockList, (intptr_t) curBlock); |
| /* Add first block to the fast lookup cache */ |
| cUnit->blockMap.Put(curBlock->startOffset, curBlock); |
| entryBlock->fallThrough = curBlock; |
| oatInsertGrowableList(cUnit.get(), curBlock->predecessors, |
| (intptr_t)entryBlock); |
| |
| /* |
| * Store back the number of blocks since new blocks may be created of |
| * accessing cUnit. |
| */ |
| cUnit->numBlocks = numBlocks; |
| |
| /* Identify code range in try blocks and set up the empty catch blocks */ |
| processTryCatchBlocks(cUnit.get()); |
| |
| /* Set up for simple method detection */ |
| int numPatterns = sizeof(specialPatterns)/sizeof(specialPatterns[0]); |
| bool livePattern = (numPatterns > 0) && !(cUnit->disableOpt & (1 << kMatch)); |
| bool* deadPattern = (bool*)oatNew(cUnit.get(), sizeof(bool) * numPatterns, |
| kAllocMisc); |
| SpecialCaseHandler specialCase = kNoHandler; |
| int patternPos = 0; |
| |
| /* Parse all instructions and put them into containing basic blocks */ |
| while (codePtr < codeEnd) { |
| MIR *insn = (MIR *) oatNew(cUnit.get(), sizeof(MIR), true, kAllocMIR); |
| insn->offset = curOffset; |
| int width = parseInsn(cUnit.get(), codePtr, &insn->dalvikInsn, false); |
| insn->width = width; |
| Instruction::Code opcode = insn->dalvikInsn.opcode; |
| if (cUnit->opcodeCount != NULL) { |
| cUnit->opcodeCount[static_cast<int>(opcode)]++; |
| } |
| |
| /* Terminate when the data section is seen */ |
| if (width == 0) |
| break; |
| |
| /* Possible simple method? */ |
| if (livePattern) { |
| livePattern = false; |
| specialCase = kNoHandler; |
| for (int i = 0; i < numPatterns; i++) { |
| if (!deadPattern[i]) { |
| if (specialPatterns[i].opcodes[patternPos] == opcode) { |
| livePattern = true; |
| specialCase = specialPatterns[i].handlerCode; |
| } else { |
| deadPattern[i] = true; |
| } |
| } |
| } |
| patternPos++; |
| } |
| |
| oatAppendMIR(curBlock, insn); |
| |
| codePtr += width; |
| int flags = Instruction::Flags(insn->dalvikInsn.opcode); |
| |
| int dfFlags = oatDataFlowAttributes[insn->dalvikInsn.opcode]; |
| |
| if (dfFlags & DF_HAS_DEFS) { |
| cUnit->defCount += (dfFlags & DF_A_WIDE) ? 2 : 1; |
| } |
| |
| if (flags & Instruction::kBranch) { |
| curBlock = processCanBranch(cUnit.get(), curBlock, insn, curOffset, |
| width, flags, codePtr, codeEnd); |
| } else if (flags & Instruction::kReturn) { |
| curBlock->fallThrough = exitBlock; |
| oatInsertGrowableList(cUnit.get(), exitBlock->predecessors, |
| (intptr_t)curBlock); |
| /* |
| * Terminate the current block if there are instructions |
| * afterwards. |
| */ |
| if (codePtr < codeEnd) { |
| /* |
| * Create a fallthrough block for real instructions |
| * (incl. NOP). |
| */ |
| if (contentIsInsn(codePtr)) { |
| findBlock(cUnit.get(), curOffset + width, |
| /* split */ |
| false, |
| /* create */ |
| true, |
| /* immedPredBlockP */ |
| NULL); |
| } |
| } |
| } else if (flags & Instruction::kThrow) { |
| processCanThrow(cUnit.get(), curBlock, insn, curOffset, width, flags, |
| tryBlockAddr, codePtr, codeEnd); |
| } else if (flags & Instruction::kSwitch) { |
| processCanSwitch(cUnit.get(), curBlock, insn, curOffset, width, flags); |
| } |
| curOffset += width; |
| BasicBlock *nextBlock = findBlock(cUnit.get(), curOffset, |
| /* split */ |
| false, |
| /* create */ |
| false, |
| /* immedPredBlockP */ |
| NULL); |
| if (nextBlock) { |
| /* |
| * The next instruction could be the target of a previously parsed |
| * forward branch so a block is already created. If the current |
| * instruction is not an unconditional branch, connect them through |
| * the fall-through link. |
| */ |
| DCHECK(curBlock->fallThrough == NULL || |
| curBlock->fallThrough == nextBlock || |
| curBlock->fallThrough == exitBlock); |
| |
| if ((curBlock->fallThrough == NULL) && (flags & Instruction::kContinue)) { |
| curBlock->fallThrough = nextBlock; |
| oatInsertGrowableList(cUnit.get(), nextBlock->predecessors, |
| (intptr_t)curBlock); |
| } |
| curBlock = nextBlock; |
| } |
| } |
| |
| if (!(cUnit->disableOpt & (1 << kSkipLargeMethodOptimization))) { |
| if ((cUnit->numBlocks > MANY_BLOCKS) || |
| ((cUnit->numBlocks > MANY_BLOCKS_INITIALIZER) && |
| PrettyMethod(method_idx, dex_file, false).find("init>") != |
| std::string::npos)) { |
| cUnit->qdMode = true; |
| } |
| } |
| |
| if (cUnit->qdMode) { |
| cUnit->disableDataflow = true; |
| // Disable optimization which require dataflow/ssa |
| cUnit->disableOpt |= |
| (1 << kNullCheckElimination) | |
| (1 << kBBOpt) | |
| (1 << kPromoteRegs); |
| if (cUnit->printMe) { |
| LOG(INFO) << "QD mode enabled: " |
| << PrettyMethod(method_idx, dex_file) |
| << " too big: " << cUnit->numBlocks; |
| } |
| } |
| |
| if (cUnit->printMe) { |
| oatDumpCompilationUnit(cUnit.get()); |
| } |
| |
| if (cUnit->enableDebug & (1 << kDebugVerifyDataflow)) { |
| /* Verify if all blocks are connected as claimed */ |
| oatDataFlowAnalysisDispatcher(cUnit.get(), verifyPredInfo, kAllNodes, |
| false /* isIterative */); |
| } |
| |
| /* Perform SSA transformation for the whole method */ |
| oatMethodSSATransformation(cUnit.get()); |
| |
| /* Detect loops */ |
| oatMethodLoopDetection(cUnit.get()); |
| |
| /* Count uses */ |
| oatMethodUseCount(cUnit.get()); |
| |
| /* Perform null check elimination */ |
| oatMethodNullCheckElimination(cUnit.get()); |
| |
| /* Do some basic block optimizations */ |
| oatMethodBasicBlockOptimization(cUnit.get()); |
| |
| oatInitializeRegAlloc(cUnit.get()); // Needs to happen after SSA naming |
| |
| /* Allocate Registers using simple local allocation scheme */ |
| oatSimpleRegAlloc(cUnit.get()); |
| |
| if (specialCase != kNoHandler) { |
| /* |
| * Custom codegen for special cases. If for any reason the |
| * special codegen doesn't success, cUnit->firstLIRInsn will |
| * set to NULL; |
| */ |
| oatSpecialMIR2LIR(cUnit.get(), specialCase); |
| } |
| |
| /* Convert MIR to LIR, etc. */ |
| if (cUnit->firstLIRInsn == NULL) { |
| oatMethodMIR2LIR(cUnit.get()); |
| } |
| |
| // Debugging only |
| if (cUnit->enableDebug & (1 << kDebugDumpCFG)) { |
| oatDumpCFG(cUnit.get(), "/sdcard/cfg/"); |
| } |
| |
| /* Method is not empty */ |
| if (cUnit->firstLIRInsn) { |
| |
| // mark the targets of switch statement case labels |
| oatProcessSwitchTables(cUnit.get()); |
| |
| /* Convert LIR into machine code. */ |
| oatAssembleLIR(cUnit.get()); |
| |
| if (cUnit->printMe) { |
| oatCodegenDump(cUnit.get()); |
| } |
| |
| if (cUnit->opcodeCount != NULL) { |
| LOG(INFO) << "Opcode Count"; |
| for (int i = 0; i < kNumPackedOpcodes; i++) { |
| if (cUnit->opcodeCount[i] != 0) { |
| LOG(INFO) << "-C- " |
| << Instruction::Name(static_cast<Instruction::Code>(i)) |
| << " " << cUnit->opcodeCount[i]; |
| } |
| } |
| } |
| } |
| |
| // Combine vmap tables - core regs, then fp regs - into vmapTable |
| std::vector<uint16_t> vmapTable; |
| for (size_t i = 0 ; i < cUnit->coreVmapTable.size(); i++) { |
| vmapTable.push_back(cUnit->coreVmapTable[i]); |
| } |
| // If we have a frame, push a marker to take place of lr |
| if (cUnit->frameSize > 0) { |
| vmapTable.push_back(INVALID_VREG); |
| } else { |
| DCHECK_EQ(__builtin_popcount(cUnit->coreSpillMask), 0); |
| DCHECK_EQ(__builtin_popcount(cUnit->fpSpillMask), 0); |
| } |
| // Combine vmap tables - core regs, then fp regs |
| for (uint32_t i = 0; i < cUnit->fpVmapTable.size(); i++) { |
| vmapTable.push_back(cUnit->fpVmapTable[i]); |
| } |
| CompiledMethod* result = |
| new CompiledMethod(cUnit->instructionSet, cUnit->codeBuffer, |
| cUnit->frameSize, cUnit->coreSpillMask, |
| cUnit->fpSpillMask, cUnit->mappingTable, vmapTable); |
| |
| VLOG(compiler) << "Compiled " << PrettyMethod(method_idx, dex_file) |
| << " (" << (cUnit->codeBuffer.size() * sizeof(cUnit->codeBuffer[0])) |
| << " bytes)"; |
| |
| #ifdef WITH_MEMSTATS |
| if (cUnit->enableDebug & (1 << kDebugShowMemoryUsage)) { |
| oatDumpMemStats(cUnit.get()); |
| } |
| #endif |
| |
| oatArenaReset(cUnit.get()); |
| |
| return result; |
| } |
| |
| } // namespace art |
| |
| extern "C" art::CompiledMethod* |
| ArtCompileMethod(art::Compiler& compiler, |
| const art::DexFile::CodeItem* code_item, |
| uint32_t access_flags, uint32_t method_idx, |
| const art::ClassLoader* class_loader, |
| const art::DexFile& dex_file) |
| { |
| CHECK_EQ(compiler.GetInstructionSet(), art::oatInstructionSet()); |
| return art::oatCompileMethod(compiler, code_item, access_flags, method_idx, |
| class_loader, dex_file); |
| } |