| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "asm_support_arm64.S" |
| |
| #include "arch/quick_alloc_entrypoints.S" |
| |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kSaveAll) |
| */ |
| .macro SETUP_SAVE_ALL_CALLEE_SAVE_FRAME |
| adrp x9, :got:_ZN3art7Runtime9instance_E |
| ldr x9, [x9, #:got_lo12:_ZN3art7Runtime9instance_E] |
| |
| // Our registers aren't intermixed - just spill in order. |
| ldr x9,[x9] // x9 = & (art::Runtime * art::Runtime.instance_) . |
| |
| // x9 = (ArtMethod*) Runtime.instance_.callee_save_methods[kRefAndArgs] . |
| ldr x9, [x9, RUNTIME_SAVE_ALL_CALLEE_SAVE_FRAME_OFFSET ] |
| |
| sub sp, sp, #368 |
| .cfi_adjust_cfa_offset 368 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_SAVE_ALL_CALLEE_SAVE != 368) |
| #error "SAVE_ALL_CALLEE_SAVE_FRAME(ARM64) size not as expected." |
| #endif |
| |
| // FP args |
| stp d0, d1, [sp, #8] |
| stp d2, d3, [sp, #24] |
| stp d4, d5, [sp, #40] |
| stp d6, d7, [sp, #56] |
| |
| // FP callee-saves |
| stp d8, d9, [sp, #72] |
| stp d10, d11, [sp, #88] |
| stp d12, d13, [sp, #104] |
| stp d14, d15, [sp, #120] |
| |
| stp d16, d17, [sp, #136] |
| stp d18, d19, [sp, #152] |
| stp d20, d21, [sp, #168] |
| stp d22, d23, [sp, #184] |
| stp d24, d25, [sp, #200] |
| stp d26, d27, [sp, #216] |
| stp d28, d29, [sp, #232] |
| stp d30, d31, [sp, #248] |
| |
| |
| // Callee saved. |
| stp xSELF, x19, [sp, #264] |
| .cfi_rel_offset x18, 264 |
| .cfi_rel_offset x19, 272 |
| |
| stp x20, x21, [sp, #280] |
| .cfi_rel_offset x20, 280 |
| .cfi_rel_offset x21, 288 |
| |
| stp x22, x23, [sp, #296] |
| .cfi_rel_offset x22, 296 |
| .cfi_rel_offset x23, 304 |
| |
| stp x24, x25, [sp, #312] |
| .cfi_rel_offset x24, 312 |
| .cfi_rel_offset x25, 320 |
| |
| stp x26, x27, [sp, #328] |
| .cfi_rel_offset x26, 328 |
| .cfi_rel_offset x27, 336 |
| |
| stp x28, xFP, [sp, #344] // Save FP. |
| .cfi_rel_offset x28, 344 |
| .cfi_rel_offset x29, 352 |
| |
| str xLR, [sp, #360] |
| .cfi_rel_offset x30, 360 |
| |
| // Loads appropriate callee-save-method |
| str x9, [sp] // Store ArtMethod* Runtime::callee_save_methods_[kRefsAndArgs] |
| |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kRefsOnly). |
| */ |
| // WIP. |
| .macro SETUP_REF_ONLY_CALLEE_SAVE_FRAME |
| adrp x9, :got:_ZN3art7Runtime9instance_E |
| ldr x9, [x9, #:got_lo12:_ZN3art7Runtime9instance_E] |
| |
| // Our registers aren't intermixed - just spill in order. |
| ldr x9,[x9] // x9 = & (art::Runtime * art::Runtime.instance_) . |
| |
| // x9 = (ArtMethod*) Runtime.instance_.callee_save_methods[kRefAndArgs] . |
| ldr x9, [x9, RUNTIME_REFS_ONLY_CALLEE_SAVE_FRAME_OFFSET ] |
| |
| sub sp, sp, #176 |
| .cfi_adjust_cfa_offset 176 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_REFS_ONLY_CALLEE_SAVE != 176) |
| #error "REFS_ONLY_CALLEE_SAVE_FRAME(ARM64) size not as expected." |
| #endif |
| |
| // FP callee-saves |
| stp d8, d9, [sp, #8] |
| stp d10, d11, [sp, #24] |
| stp d12, d13, [sp, #40] |
| stp d14, d15, [sp, #56] |
| |
| // Callee saved. |
| stp xSELF, x19, [sp, #72] |
| .cfi_rel_offset x18, 72 |
| .cfi_rel_offset x19, 80 |
| |
| stp x20, x21, [sp, #88] |
| .cfi_rel_offset x20, 88 |
| .cfi_rel_offset x21, 96 |
| |
| stp x22, x23, [sp, #104] |
| .cfi_rel_offset x22, 104 |
| .cfi_rel_offset x23, 112 |
| |
| stp x24, x25, [sp, #120] |
| .cfi_rel_offset x24, 120 |
| .cfi_rel_offset x25, 128 |
| |
| stp x26, x27, [sp, #136] |
| .cfi_rel_offset x26, 136 |
| .cfi_rel_offset x27, 144 |
| |
| stp x28, xFP, [sp, #152] // Save FP. |
| .cfi_rel_offset x28, 152 |
| .cfi_rel_offset x29, 160 |
| |
| str xLR, [sp, #168] |
| .cfi_rel_offset x30, 168 |
| |
| // Loads appropriate callee-save-method |
| str x9, [sp] // Store ArtMethod* Runtime::callee_save_methods_[kRefsAndArgs] |
| .endm |
| |
| .macro RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| // FP callee saves |
| ldp d8, d9, [sp, #8] |
| ldp d10, d11, [sp, #24] |
| ldp d12, d13, [sp, #40] |
| ldp d14, d15, [sp, #56] |
| |
| // Callee saved. |
| ldp xSELF, x19, [sp, #72] |
| .cfi_restore x18 |
| .cfi_restore x19 |
| |
| ldp x20, x21, [sp, #88] |
| .cfi_restore x20 |
| .cfi_restore x21 |
| |
| ldp x22, x23, [sp, #104] |
| .cfi_restore x22 |
| .cfi_restore x23 |
| |
| ldp x24, x25, [sp, #120] |
| .cfi_restore x24 |
| .cfi_restore x25 |
| |
| ldp x26, x27, [sp, #136] |
| .cfi_restore x26 |
| .cfi_restore x27 |
| |
| ldp x28, xFP, [sp, #152] // Save FP. |
| .cfi_restore x28 |
| .cfi_restore x29 |
| |
| ldr xLR, [sp, #168] |
| .cfi_restore x30 |
| |
| add sp, sp, #176 |
| .cfi_adjust_cfa_offset -176 |
| .endm |
| |
| .macro POP_REF_ONLY_CALLEE_SAVE_FRAME |
| add sp, sp, #176 |
| .cfi_adjust_cfa_offset -176 |
| .endm |
| |
| .macro RESTORE_REF_ONLY_CALLEE_SAVE_FRAME_AND_RETURN |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| ret |
| .endm |
| |
| |
| .macro SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME_INTERNAL |
| sub sp, sp, #304 |
| .cfi_adjust_cfa_offset 304 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_REFS_AND_ARGS_CALLEE_SAVE != 304) |
| #error "REFS_AND_ARGS_CALLEE_SAVE_FRAME(ARM64) size not as expected." |
| #endif |
| |
| stp d0, d1, [sp, #16] |
| stp d2, d3, [sp, #32] |
| stp d4, d5, [sp, #48] |
| stp d6, d7, [sp, #64] |
| stp d8, d9, [sp, #80] |
| stp d10, d11, [sp, #96] |
| stp d12, d13, [sp, #112] |
| stp d14, d15, [sp, #128] |
| |
| stp x1, x2, [sp, #144] |
| .cfi_rel_offset x1, 144 |
| .cfi_rel_offset x2, 152 |
| |
| stp x3, x4, [sp, #160] |
| .cfi_rel_offset x3, 160 |
| .cfi_rel_offset x4, 168 |
| |
| stp x5, x6, [sp, #176] |
| .cfi_rel_offset x5, 176 |
| .cfi_rel_offset x6, 184 |
| |
| stp x7, xSELF, [sp, #192] |
| .cfi_rel_offset x7, 192 |
| .cfi_rel_offset x18, 200 |
| |
| stp x19, x20, [sp, #208] |
| .cfi_rel_offset x19, 208 |
| .cfi_rel_offset x20, 216 |
| |
| stp x21, x22, [sp, #224] |
| .cfi_rel_offset x21, 224 |
| .cfi_rel_offset x22, 232 |
| |
| stp x23, x24, [sp, #240] |
| .cfi_rel_offset x23, 240 |
| .cfi_rel_offset x24, 248 |
| |
| stp x25, x26, [sp, #256] |
| .cfi_rel_offset x25, 256 |
| .cfi_rel_offset x26, 264 |
| |
| stp x27, x28, [sp, #272] |
| .cfi_rel_offset x27, 272 |
| .cfi_rel_offset x28, 280 |
| |
| stp xFP, xLR, [sp, #288] |
| .cfi_rel_offset x29, 288 |
| .cfi_rel_offset x30, 296 |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kRefsAndArgs). |
| * |
| * TODO This is probably too conservative - saving FP & LR. |
| */ |
| .macro SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| adrp x9, :got:_ZN3art7Runtime9instance_E |
| ldr x9, [x9, #:got_lo12:_ZN3art7Runtime9instance_E] |
| |
| // Our registers aren't intermixed - just spill in order. |
| ldr x9,[x9] // x9 = & (art::Runtime * art::Runtime.instance_) . |
| |
| // x9 = (ArtMethod*) Runtime.instance_.callee_save_methods[kRefAndArgs] . |
| ldr x9, [x9, RUNTIME_REF_AND_ARGS_CALLEE_SAVE_FRAME_OFFSET ] |
| |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME_INTERNAL |
| |
| str x9, [sp] // Store ArtMethod* Runtime::callee_save_methods_[kRefsAndArgs] |
| .endm |
| |
| .macro RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| |
| ldp d0, d1, [sp, #16] |
| ldp d2, d3, [sp, #32] |
| ldp d4, d5, [sp, #48] |
| ldp d6, d7, [sp, #64] |
| ldp d8, d9, [sp, #80] |
| ldp d10, d11, [sp, #96] |
| ldp d12, d13, [sp, #112] |
| ldp d14, d15, [sp, #128] |
| |
| // args. |
| ldp x1, x2, [sp, #144] |
| .cfi_restore x1 |
| .cfi_restore x2 |
| |
| ldp x3, x4, [sp, #160] |
| .cfi_restore x3 |
| .cfi_restore x4 |
| |
| ldp x5, x6, [sp, #176] |
| .cfi_restore x5 |
| .cfi_restore x6 |
| |
| ldp x7, xSELF, [sp, #192] |
| .cfi_restore x7 |
| .cfi_restore x18 |
| |
| ldp x19, x20, [sp, #208] |
| .cfi_restore x19 |
| .cfi_restore x20 |
| |
| ldp x21, x22, [sp, #224] |
| .cfi_restore x21 |
| .cfi_restore x22 |
| |
| ldp x23, x24, [sp, #240] |
| .cfi_restore x23 |
| .cfi_restore x24 |
| |
| ldp x25, x26, [sp, #256] |
| .cfi_restore x25 |
| .cfi_restore x26 |
| |
| ldp x27, x28, [sp, #272] |
| .cfi_restore x27 |
| .cfi_restore x28 |
| |
| ldp xFP, xLR, [sp, #288] |
| .cfi_restore x29 |
| .cfi_restore x30 |
| |
| add sp, sp, #304 |
| .cfi_adjust_cfa_offset -304 |
| .endm |
| |
| .macro RETURN_IF_RESULT_IS_ZERO |
| cbnz x0, 1f // result non-zero branch over |
| ret // return |
| 1: |
| .endm |
| |
| .macro RETURN_IF_RESULT_IS_NON_ZERO |
| cbz x0, 1f // result zero branch over |
| ret // return |
| 1: |
| .endm |
| |
| /* |
| * Macro that set calls through to artDeliverPendingExceptionFromCode, where the pending |
| * exception is Thread::Current()->exception_ |
| */ |
| .macro DELIVER_PENDING_EXCEPTION |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME |
| mov x0, xSELF |
| mov x1, sp |
| |
| // Point of no return. |
| b artDeliverPendingExceptionFromCode // artDeliverPendingExceptionFromCode(Thread*, SP) |
| brk 0 // Unreached |
| .endm |
| |
| .macro RETURN_OR_DELIVER_PENDING_EXCEPTION_REG reg |
| ldr \reg, [xSELF, # THREAD_EXCEPTION_OFFSET] // Get exception field. |
| cbnz \reg, 1f |
| ret |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| .endm |
| |
| .macro RETURN_OR_DELIVER_PENDING_EXCEPTION |
| RETURN_OR_DELIVER_PENDING_EXCEPTION_REG x9 |
| .endm |
| |
| // Same as above with x1. This is helpful in stubs that want to avoid clobbering another register. |
| .macro RETURN_OR_DELIVER_PENDING_EXCEPTION_X1 |
| RETURN_OR_DELIVER_PENDING_EXCEPTION_REG x1 |
| .endm |
| |
| .macro RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| cbnz w0, 1f // result non-zero branch over |
| ret // return |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| .endm |
| |
| .macro NO_ARG_RUNTIME_EXCEPTION c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov x0, xSELF // pass Thread::Current |
| mov x1, sp // pass SP |
| b \cxx_name // \cxx_name(Thread*, SP) |
| END \c_name |
| .endm |
| |
| .macro ONE_ARG_RUNTIME_EXCEPTION c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context. |
| mov x1, xSELF // pass Thread::Current. |
| mov x2, sp // pass SP. |
| b \cxx_name // \cxx_name(arg, Thread*, SP). |
| brk 0 |
| END \c_name |
| .endm |
| |
| .macro TWO_ARG_RUNTIME_EXCEPTION c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov x2, xSELF // pass Thread::Current |
| mov x3, sp // pass SP |
| b \cxx_name // \cxx_name(arg1, arg2, Thread*, SP) |
| brk 0 |
| END \c_name |
| .endm |
| |
| /* |
| * Called by managed code, saves callee saves and then calls artThrowException |
| * that will place a mock Method* at the bottom of the stack. Arg1 holds the exception. |
| */ |
| ONE_ARG_RUNTIME_EXCEPTION art_quick_deliver_exception, artDeliverExceptionFromCode |
| |
| /* |
| * Called by managed code to create and deliver a NullPointerException. |
| */ |
| NO_ARG_RUNTIME_EXCEPTION art_quick_throw_null_pointer_exception, artThrowNullPointerExceptionFromCode |
| |
| /* |
| * Called by managed code to create and deliver an ArithmeticException. |
| */ |
| NO_ARG_RUNTIME_EXCEPTION art_quick_throw_div_zero, artThrowDivZeroFromCode |
| |
| /* |
| * Called by managed code to create and deliver an ArrayIndexOutOfBoundsException. Arg1 holds |
| * index, arg2 holds limit. |
| */ |
| TWO_ARG_RUNTIME_EXCEPTION art_quick_throw_array_bounds, artThrowArrayBoundsFromCode |
| |
| /* |
| * Called by managed code to create and deliver a StackOverflowError. |
| */ |
| NO_ARG_RUNTIME_EXCEPTION art_quick_throw_stack_overflow, artThrowStackOverflowFromCode |
| |
| /* |
| * Called by managed code to create and deliver a NoSuchMethodError. |
| */ |
| ONE_ARG_RUNTIME_EXCEPTION art_quick_throw_no_such_method, artThrowNoSuchMethodFromCode |
| |
| /* |
| * All generated callsites for interface invokes and invocation slow paths will load arguments |
| * as usual - except instead of loading arg0/x0 with the target Method*, arg0/x0 will contain |
| * the method_idx. This wrapper will save arg1-arg3, load the caller's Method*, align the |
| * stack and call the appropriate C helper. |
| * NOTE: "this" is first visible argument of the target, and so can be found in arg1/x1. |
| * |
| * The helper will attempt to locate the target and return a 128-bit result in x0/x1 consisting |
| * of the target Method* in x0 and method->code_ in x1. |
| * |
| * If unsuccessful, the helper will return NULL/????. There will be a pending exception in the |
| * thread and we branch to another stub to deliver it. |
| * |
| * On success this wrapper will restore arguments and *jump* to the target, leaving the lr |
| * pointing back to the original caller. |
| * |
| * Adapted from ARM32 code. |
| * |
| * Clobbers x12. |
| */ |
| .macro INVOKE_TRAMPOLINE c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME // save callee saves in case allocation triggers GC |
| // Helper signature is always |
| // (method_idx, *this_object, *caller_method, *self, sp) |
| |
| ldr w2, [sp, #FRAME_SIZE_REFS_AND_ARGS_CALLEE_SAVE] // pass caller Method* |
| mov x3, xSELF // pass Thread::Current |
| mov x4, sp |
| bl \cxx_name // (method_idx, this, caller, Thread*, SP) |
| mov x12, x1 // save Method*->code_ |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| cbz x0, 1f // did we find the target? if not go to exception delivery |
| br x12 // tail call to target |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END \c_name |
| .endm |
| |
| INVOKE_TRAMPOLINE art_quick_invoke_interface_trampoline, artInvokeInterfaceTrampoline |
| INVOKE_TRAMPOLINE art_quick_invoke_interface_trampoline_with_access_check, artInvokeInterfaceTrampolineWithAccessCheck |
| |
| INVOKE_TRAMPOLINE art_quick_invoke_static_trampoline_with_access_check, artInvokeStaticTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_direct_trampoline_with_access_check, artInvokeDirectTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_super_trampoline_with_access_check, artInvokeSuperTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_virtual_trampoline_with_access_check, artInvokeVirtualTrampolineWithAccessCheck |
| |
| |
| .macro INVOKE_STUB_CREATE_FRAME |
| |
| SAVE_SIZE=6*8 // x4, x5, x19(wSUSPEND), SP, LR & FP saved. |
| SAVE_SIZE_AND_METHOD=SAVE_SIZE+STACK_REFERENCE_SIZE |
| |
| |
| mov x9, sp // Save stack pointer. |
| .cfi_register sp,x9 |
| |
| add x10, x2, # SAVE_SIZE_AND_METHOD // calculate size of frame. |
| sub x10, sp, x10 // Calculate SP position - saves + ArtMethod* + args |
| and x10, x10, # ~0xf // Enforce 16 byte stack alignment. |
| mov sp, x10 // Set new SP. |
| |
| sub x10, x9, #SAVE_SIZE // Calculate new FP (later). Done here as we must move SP |
| .cfi_def_cfa_register x10 // before this. |
| .cfi_adjust_cfa_offset SAVE_SIZE |
| |
| stp x9, x19, [x10, #32] // Save old stack pointer and x19(wSUSPEND) |
| .cfi_rel_offset sp, 32 |
| .cfi_rel_offset x19, 40 |
| |
| stp x4, x5, [x10, #16] // Save result and shorty addresses. |
| .cfi_rel_offset x4, 16 |
| .cfi_rel_offset x5, 24 |
| |
| stp xFP, xLR, [x10] // Store LR & FP. |
| .cfi_rel_offset x29, 0 |
| .cfi_rel_offset x30, 8 |
| |
| mov xFP, x10 // Use xFP now, as it's callee-saved. |
| .cfi_def_cfa_register x29 |
| mov xSELF, x3 // Move thread pointer into SELF register. |
| mov wSUSPEND, #SUSPEND_CHECK_INTERVAL // reset wSUSPEND to suspend check interval |
| |
| // Copy arguments into stack frame. |
| // Use simple copy routine for now. |
| // 4 bytes per slot. |
| // X1 - source address |
| // W2 - args length |
| // X9 - destination address. |
| // W10 - temporary |
| add x9, sp, #4 // Destination address is bottom of stack + NULL. |
| |
| // Use \@ to differentiate between macro invocations. |
| .LcopyParams\@: |
| cmp w2, #0 |
| beq .LendCopyParams\@ |
| sub w2, w2, #4 // Need 65536 bytes of range. |
| ldr w10, [x1, x2] |
| str w10, [x9, x2] |
| |
| b .LcopyParams\@ |
| |
| .LendCopyParams\@: |
| |
| // Store NULL into StackReference<Method>* at bottom of frame. |
| str wzr, [sp] |
| |
| #if (STACK_REFERENCE_SIZE != 4) |
| #error "STACK_REFERENCE_SIZE(ARM64) size not as expected." |
| #endif |
| .endm |
| |
| .macro INVOKE_STUB_CALL_AND_RETURN |
| |
| // load method-> METHOD_QUICK_CODE_OFFSET |
| ldr x9, [x0 , #METHOD_QUICK_CODE_OFFSET] |
| // Branch to method. |
| blr x9 |
| |
| // Restore return value address and shorty address. |
| ldp x4,x5, [xFP, #16] |
| .cfi_restore x4 |
| .cfi_restore x5 |
| |
| // Store result (w0/x0/s0/d0) appropriately, depending on resultType. |
| ldrb w10, [x5] |
| |
| // Don't set anything for a void type. |
| cmp w10, #'V' |
| beq .Lexit_art_quick_invoke_stub\@ |
| |
| cmp w10, #'D' |
| bne .Lreturn_is_float\@ |
| str d0, [x4] |
| b .Lexit_art_quick_invoke_stub\@ |
| |
| .Lreturn_is_float\@: |
| cmp w10, #'F' |
| bne .Lreturn_is_int\@ |
| str s0, [x4] |
| b .Lexit_art_quick_invoke_stub\@ |
| |
| // Just store x0. Doesn't matter if it is 64 or 32 bits. |
| .Lreturn_is_int\@: |
| str x0, [x4] |
| |
| .Lexit_art_quick_invoke_stub\@: |
| ldp x2, x19, [xFP, #32] // Restore stack pointer and x19. |
| .cfi_restore x19 |
| mov sp, x2 |
| .cfi_restore sp |
| |
| ldp xFP, xLR, [xFP] // Restore old frame pointer and link register. |
| .cfi_restore x29 |
| .cfi_restore x30 |
| |
| ret |
| |
| .endm |
| |
| |
| /* |
| * extern"C" void art_quick_invoke_stub(ArtMethod *method, x0 |
| * uint32_t *args, x1 |
| * uint32_t argsize, w2 |
| * Thread *self, x3 |
| * JValue *result, x4 |
| * char *shorty); x5 |
| * +----------------------+ |
| * | | |
| * | C/C++ frame | |
| * | LR'' | |
| * | FP'' | <- SP' |
| * +----------------------+ |
| * +----------------------+ |
| * | SP' | |
| * | X5 | |
| * | X4 | Saved registers |
| * | LR' | |
| * | FP' | <- FP |
| * +----------------------+ |
| * | uint32_t out[n-1] | |
| * | : : | Outs |
| * | uint32_t out[0] | |
| * | StackRef<ArtMethod> | <- SP value=null |
| * +----------------------+ |
| * |
| * Outgoing registers: |
| * x0 - Method* |
| * x1-x7 - integer parameters. |
| * d0-d7 - Floating point parameters. |
| * xSELF = self |
| * wSUSPEND = suspend count |
| * SP = & of ArtMethod* |
| * x1 = "this" pointer. |
| * |
| */ |
| ENTRY art_quick_invoke_stub |
| // Spill registers as per AACPS64 calling convention. |
| INVOKE_STUB_CREATE_FRAME |
| |
| // Fill registers x/w1 to x/w7 and s/d0 to s/d7 with parameters. |
| // Parse the passed shorty to determine which register to load. |
| // Load addresses for routines that load WXSD registers. |
| adr x11, .LstoreW2 |
| adr x12, .LstoreX2 |
| adr x13, .LstoreS0 |
| adr x14, .LstoreD0 |
| |
| // Initialize routine offsets to 0 for integers and floats. |
| // x8 for integers, x15 for floating point. |
| mov x8, #0 |
| mov x15, #0 |
| |
| add x10, x5, #1 // Load shorty address, plus one to skip return value. |
| ldr w1, [x9],#4 // Load "this" parameter, and increment arg pointer. |
| |
| // Loop to fill registers. |
| .LfillRegisters: |
| ldrb w17, [x10], #1 // Load next character in signature, and increment. |
| cbz w17, .LcallFunction // Exit at end of signature. Shorty 0 terminated. |
| |
| cmp w17, #'F' // is this a float? |
| bne .LisDouble |
| |
| cmp x15, # 8*12 // Skip this load if all registers full. |
| beq .Ladvance4 |
| |
| add x17, x13, x15 // Calculate subroutine to jump to. |
| br x17 |
| |
| .LisDouble: |
| cmp w17, #'D' // is this a double? |
| bne .LisLong |
| |
| cmp x15, # 8*12 // Skip this load if all registers full. |
| beq .Ladvance8 |
| |
| add x17, x14, x15 // Calculate subroutine to jump to. |
| br x17 |
| |
| .LisLong: |
| cmp w17, #'J' // is this a long? |
| bne .LisOther |
| |
| cmp x8, # 6*12 // Skip this load if all registers full. |
| beq .Ladvance8 |
| |
| add x17, x12, x8 // Calculate subroutine to jump to. |
| br x17 |
| |
| .LisOther: // Everything else takes one vReg. |
| cmp x8, # 6*12 // Skip this load if all registers full. |
| beq .Ladvance4 |
| |
| add x17, x11, x8 // Calculate subroutine to jump to. |
| br x17 |
| |
| .Ladvance4: |
| add x9, x9, #4 |
| b .LfillRegisters |
| |
| .Ladvance8: |
| add x9, x9, #8 |
| b .LfillRegisters |
| |
| // Macro for loading a parameter into a register. |
| // counter - the register with offset into these tables |
| // size - the size of the register - 4 or 8 bytes. |
| // register - the name of the register to be loaded. |
| .macro LOADREG counter size register return |
| ldr \register , [x9], #\size |
| add \counter, \counter, 12 |
| b \return |
| .endm |
| |
| // Store ints. |
| .LstoreW2: |
| LOADREG x8 4 w2 .LfillRegisters |
| LOADREG x8 4 w3 .LfillRegisters |
| LOADREG x8 4 w4 .LfillRegisters |
| LOADREG x8 4 w5 .LfillRegisters |
| LOADREG x8 4 w6 .LfillRegisters |
| LOADREG x8 4 w7 .LfillRegisters |
| |
| // Store longs. |
| .LstoreX2: |
| LOADREG x8 8 x2 .LfillRegisters |
| LOADREG x8 8 x3 .LfillRegisters |
| LOADREG x8 8 x4 .LfillRegisters |
| LOADREG x8 8 x5 .LfillRegisters |
| LOADREG x8 8 x6 .LfillRegisters |
| LOADREG x8 8 x7 .LfillRegisters |
| |
| // Store singles. |
| .LstoreS0: |
| LOADREG x15 4 s0 .LfillRegisters |
| LOADREG x15 4 s1 .LfillRegisters |
| LOADREG x15 4 s2 .LfillRegisters |
| LOADREG x15 4 s3 .LfillRegisters |
| LOADREG x15 4 s4 .LfillRegisters |
| LOADREG x15 4 s5 .LfillRegisters |
| LOADREG x15 4 s6 .LfillRegisters |
| LOADREG x15 4 s7 .LfillRegisters |
| |
| // Store doubles. |
| .LstoreD0: |
| LOADREG x15 8 d0 .LfillRegisters |
| LOADREG x15 8 d1 .LfillRegisters |
| LOADREG x15 8 d2 .LfillRegisters |
| LOADREG x15 8 d3 .LfillRegisters |
| LOADREG x15 8 d4 .LfillRegisters |
| LOADREG x15 8 d5 .LfillRegisters |
| LOADREG x15 8 d6 .LfillRegisters |
| LOADREG x15 8 d7 .LfillRegisters |
| |
| |
| .LcallFunction: |
| |
| INVOKE_STUB_CALL_AND_RETURN |
| |
| END art_quick_invoke_stub |
| |
| /* extern"C" |
| * void art_quick_invoke_static_stub(ArtMethod *method, x0 |
| * uint32_t *args, x1 |
| * uint32_t argsize, w2 |
| * Thread *self, x3 |
| * JValue *result, x4 |
| * char *shorty); x5 |
| */ |
| ENTRY art_quick_invoke_static_stub |
| // Spill registers as per AACPS64 calling convention. |
| INVOKE_STUB_CREATE_FRAME |
| |
| // Fill registers x/w1 to x/w7 and s/d0 to s/d7 with parameters. |
| // Parse the passed shorty to determine which register to load. |
| // Load addresses for routines that load WXSD registers. |
| adr x11, .LstoreW1_2 |
| adr x12, .LstoreX1_2 |
| adr x13, .LstoreS0_2 |
| adr x14, .LstoreD0_2 |
| |
| // Initialize routine offsets to 0 for integers and floats. |
| // x8 for integers, x15 for floating point. |
| mov x8, #0 |
| mov x15, #0 |
| |
| add x10, x5, #1 // Load shorty address, plus one to skip return value. |
| |
| // Loop to fill registers. |
| .LfillRegisters2: |
| ldrb w17, [x10], #1 // Load next character in signature, and increment. |
| cbz w17, .LcallFunction2 // Exit at end of signature. Shorty 0 terminated. |
| |
| cmp w17, #'F' // is this a float? |
| bne .LisDouble2 |
| |
| cmp x15, # 8*12 // Skip this load if all registers full. |
| beq .Ladvance4_2 |
| |
| add x17, x13, x15 // Calculate subroutine to jump to. |
| br x17 |
| |
| .LisDouble2: |
| cmp w17, #'D' // is this a double? |
| bne .LisLong2 |
| |
| cmp x15, # 8*12 // Skip this load if all registers full. |
| beq .Ladvance8_2 |
| |
| add x17, x14, x15 // Calculate subroutine to jump to. |
| br x17 |
| |
| .LisLong2: |
| cmp w17, #'J' // is this a long? |
| bne .LisOther2 |
| |
| cmp x8, # 7*12 // Skip this load if all registers full. |
| beq .Ladvance8_2 |
| |
| add x17, x12, x8 // Calculate subroutine to jump to. |
| br x17 |
| |
| .LisOther2: // Everything else takes one vReg. |
| cmp x8, # 7*12 // Skip this load if all registers full. |
| beq .Ladvance4_2 |
| |
| add x17, x11, x8 // Calculate subroutine to jump to. |
| br x17 |
| |
| .Ladvance4_2: |
| add x9, x9, #4 |
| b .LfillRegisters2 |
| |
| .Ladvance8_2: |
| add x9, x9, #8 |
| b .LfillRegisters2 |
| |
| // Store ints. |
| .LstoreW1_2: |
| LOADREG x8 4 w1 .LfillRegisters2 |
| LOADREG x8 4 w2 .LfillRegisters2 |
| LOADREG x8 4 w3 .LfillRegisters2 |
| LOADREG x8 4 w4 .LfillRegisters2 |
| LOADREG x8 4 w5 .LfillRegisters2 |
| LOADREG x8 4 w6 .LfillRegisters2 |
| LOADREG x8 4 w7 .LfillRegisters2 |
| |
| // Store longs. |
| .LstoreX1_2: |
| LOADREG x8 8 x1 .LfillRegisters2 |
| LOADREG x8 8 x2 .LfillRegisters2 |
| LOADREG x8 8 x3 .LfillRegisters2 |
| LOADREG x8 8 x4 .LfillRegisters2 |
| LOADREG x8 8 x5 .LfillRegisters2 |
| LOADREG x8 8 x6 .LfillRegisters2 |
| LOADREG x8 8 x7 .LfillRegisters2 |
| |
| // Store singles. |
| .LstoreS0_2: |
| LOADREG x15 4 s0 .LfillRegisters2 |
| LOADREG x15 4 s1 .LfillRegisters2 |
| LOADREG x15 4 s2 .LfillRegisters2 |
| LOADREG x15 4 s3 .LfillRegisters2 |
| LOADREG x15 4 s4 .LfillRegisters2 |
| LOADREG x15 4 s5 .LfillRegisters2 |
| LOADREG x15 4 s6 .LfillRegisters2 |
| LOADREG x15 4 s7 .LfillRegisters2 |
| |
| // Store doubles. |
| .LstoreD0_2: |
| LOADREG x15 8 d0 .LfillRegisters2 |
| LOADREG x15 8 d1 .LfillRegisters2 |
| LOADREG x15 8 d2 .LfillRegisters2 |
| LOADREG x15 8 d3 .LfillRegisters2 |
| LOADREG x15 8 d4 .LfillRegisters2 |
| LOADREG x15 8 d5 .LfillRegisters2 |
| LOADREG x15 8 d6 .LfillRegisters2 |
| LOADREG x15 8 d7 .LfillRegisters2 |
| |
| |
| .LcallFunction2: |
| |
| INVOKE_STUB_CALL_AND_RETURN |
| |
| END art_quick_invoke_static_stub |
| |
| |
| |
| /* |
| * On entry x0 is uintptr_t* gprs_ and x1 is uint64_t* fprs_ |
| */ |
| |
| ENTRY art_quick_do_long_jump |
| // Load FPRs |
| ldp d0, d1, [x1], #16 |
| ldp d2, d3, [x1], #16 |
| ldp d4, d5, [x1], #16 |
| ldp d6, d7, [x1], #16 |
| ldp d8, d9, [x1], #16 |
| ldp d10, d11, [x1], #16 |
| ldp d12, d13, [x1], #16 |
| ldp d14, d15, [x1], #16 |
| ldp d16, d17, [x1], #16 |
| ldp d18, d19, [x1], #16 |
| ldp d20, d21, [x1], #16 |
| ldp d22, d23, [x1], #16 |
| ldp d24, d25, [x1], #16 |
| ldp d26, d27, [x1], #16 |
| ldp d28, d29, [x1], #16 |
| ldp d30, d31, [x1] |
| |
| // Load GPRs |
| // TODO: lots of those are smashed, could optimize. |
| add x0, x0, #30*8 |
| ldp x30, x1, [x0], #-16 |
| ldp x28, x29, [x0], #-16 |
| ldp x26, x27, [x0], #-16 |
| ldp x24, x25, [x0], #-16 |
| ldp x22, x23, [x0], #-16 |
| ldp x20, x21, [x0], #-16 |
| ldp x18, x19, [x0], #-16 |
| ldp x16, x17, [x0], #-16 |
| ldp x14, x15, [x0], #-16 |
| ldp x12, x13, [x0], #-16 |
| ldp x10, x11, [x0], #-16 |
| ldp x8, x9, [x0], #-16 |
| ldp x6, x7, [x0], #-16 |
| ldp x4, x5, [x0], #-16 |
| ldp x2, x3, [x0], #-16 |
| mov sp, x1 |
| |
| // TODO: Is it really OK to use LR for the target PC? |
| mov x0, #0 |
| mov x1, #0 |
| br xLR |
| END art_quick_do_long_jump |
| |
| /* |
| * Entry from managed code that calls artHandleFillArrayDataFromCode and delivers exception on |
| * failure. |
| */ |
| .extern artHandleFillArrayDataFromCode |
| ENTRY art_quick_handle_fill_data |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // Save callee saves in case exception allocation triggers GC. |
| mov x2, xSELF // Pass Thread::Current. |
| mov x3, sp // Pass SP. |
| bl artHandleFillArrayDataFromCode // (Array*, const DexFile::Payload*, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_handle_fill_data |
| |
| /* |
| * Entry from managed code that calls artLockObjectFromCode, may block for GC. x0 holds the |
| * possibly null object to lock. |
| * |
| * Derived from arm32 code. |
| */ |
| .extern artLockObjectFromCode |
| ENTRY art_quick_lock_object |
| cbz w0, .Lslow_lock |
| add x4, x0, #LOCK_WORD_OFFSET // exclusive load/store had no immediate anymore |
| .Lretry_lock: |
| ldr w2, [xSELF, #THREAD_ID_OFFSET] // TODO: Can the thread ID really change during the loop? |
| ldxr w1, [x4] |
| cbnz w1, .Lnot_unlocked // already thin locked |
| stxr w3, w2, [x4] |
| cbnz w3, .Lstrex_fail // store failed, retry |
| dmb ishld // full (LoadLoad|LoadStore) memory barrier |
| ret |
| .Lstrex_fail: |
| b .Lretry_lock // unlikely forward branch, need to reload and recheck r1/r2 |
| .Lnot_unlocked: |
| lsr w3, w1, 30 |
| cbnz w3, .Lslow_lock // if either of the top two bits are set, go slow path |
| eor w2, w1, w2 // lock_word.ThreadId() ^ self->ThreadId() |
| uxth w2, w2 // zero top 16 bits |
| cbnz w2, .Lslow_lock // lock word and self thread id's match -> recursive lock |
| // else contention, go to slow path |
| add w2, w1, #65536 // increment count in lock word placing in w2 for storing |
| lsr w1, w2, 30 // if either of the top two bits are set, we overflowed. |
| cbnz w1, .Lslow_lock // if we overflow the count go slow path |
| str w2, [x0, #LOCK_WORD_OFFSET]// no need for stxr as we hold the lock |
| ret |
| .Lslow_lock: |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case we block |
| mov x1, xSELF // pass Thread::Current |
| mov x2, sp // pass SP |
| bl artLockObjectFromCode // (Object* obj, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| END art_quick_lock_object |
| |
| /* |
| * Entry from managed code that calls artUnlockObjectFromCode and delivers exception on failure. |
| * x0 holds the possibly null object to lock. |
| * |
| * Derived from arm32 code. |
| */ |
| .extern artUnlockObjectFromCode |
| ENTRY art_quick_unlock_object |
| cbz x0, .Lslow_unlock |
| ldr w1, [x0, #LOCK_WORD_OFFSET] |
| lsr w2, w1, 30 |
| cbnz w2, .Lslow_unlock // if either of the top two bits are set, go slow path |
| ldr w2, [xSELF, #THREAD_ID_OFFSET] |
| eor w3, w1, w2 // lock_word.ThreadId() ^ self->ThreadId() |
| uxth w3, w3 // zero top 16 bits |
| cbnz w3, .Lslow_unlock // do lock word and self thread id's match? |
| cmp w1, #65536 |
| bpl .Lrecursive_thin_unlock |
| // transition to unlocked, w3 holds 0 |
| dmb ish // full (LoadStore|StoreStore) memory barrier |
| str w3, [x0, #LOCK_WORD_OFFSET] |
| ret |
| .Lrecursive_thin_unlock: |
| sub w1, w1, #65536 |
| str w1, [x0, #LOCK_WORD_OFFSET] |
| ret |
| .Lslow_unlock: |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case exception allocation triggers GC |
| mov x1, xSELF // pass Thread::Current |
| mov x2, sp // pass SP |
| bl artUnlockObjectFromCode // (Object* obj, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| END art_quick_unlock_object |
| |
| /* |
| * Entry from managed code that calls artIsAssignableFromCode and on failure calls |
| * artThrowClassCastException. |
| */ |
| .extern artThrowClassCastException |
| ENTRY art_quick_check_cast |
| // Store arguments and link register |
| sub sp, sp, #32 // Stack needs to be 16b aligned on calls |
| .cfi_adjust_cfa_offset 32 |
| stp x0, x1, [sp] |
| .cfi_rel_offset x0, 0 |
| .cfi_rel_offset x1, 8 |
| stp xSELF, xLR, [sp, #16] |
| .cfi_rel_offset x18, 16 |
| .cfi_rel_offset x30, 24 |
| |
| // Call runtime code |
| bl artIsAssignableFromCode |
| |
| // Check for exception |
| cbz x0, .Lthrow_class_cast_exception |
| |
| // Restore and return |
| ldp x0, x1, [sp] |
| .cfi_restore x0 |
| .cfi_restore x1 |
| ldp xSELF, xLR, [sp, #16] |
| .cfi_restore x18 |
| .cfi_restore x30 |
| add sp, sp, #32 |
| .cfi_adjust_cfa_offset -32 |
| ret |
| |
| .Lthrow_class_cast_exception: |
| // Restore |
| ldp x0, x1, [sp] |
| .cfi_restore x0 |
| .cfi_restore x1 |
| ldp xSELF, xLR, [sp, #16] |
| .cfi_restore x18 |
| .cfi_restore x30 |
| add sp, sp, #32 |
| .cfi_adjust_cfa_offset -32 |
| |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov x2, xSELF // pass Thread::Current |
| mov x3, sp // pass SP |
| b artThrowClassCastException // (Class*, Class*, Thread*, SP) |
| brk 0 // We should not return here... |
| END art_quick_check_cast |
| |
| /* |
| * Entry from managed code for array put operations of objects where the value being stored |
| * needs to be checked for compatibility. |
| * x0 = array, x1 = index, x2 = value |
| * |
| * Currently all values should fit into w0/w1/w2, and w1 always will as indices are 32b. We |
| * assume, though, that the upper 32b are zeroed out. At least for x1/w1 we can do better by |
| * using index-zero-extension in load/stores. |
| * |
| * Temporaries: x3, x4 |
| * TODO: x4 OK? ip seems wrong here. |
| */ |
| ENTRY art_quick_aput_obj_with_null_and_bound_check |
| tst x0, x0 |
| bne art_quick_aput_obj_with_bound_check |
| b art_quick_throw_null_pointer_exception |
| END art_quick_aput_obj_with_null_and_bound_check |
| |
| ENTRY art_quick_aput_obj_with_bound_check |
| ldr w3, [x0, #ARRAY_LENGTH_OFFSET] |
| cmp w3, w1 |
| bhi art_quick_aput_obj |
| mov x0, x1 |
| mov x1, x3 |
| b art_quick_throw_array_bounds |
| END art_quick_aput_obj_with_bound_check |
| |
| ENTRY art_quick_aput_obj |
| cbz x2, .Ldo_aput_null |
| ldr w3, [x0, #CLASS_OFFSET] // Heap reference = 32b |
| // This also zero-extends to x3 |
| ldr w4, [x2, #CLASS_OFFSET] // Heap reference = 32b |
| // This also zero-extends to x4 |
| ldr w3, [x3, #CLASS_COMPONENT_TYPE_OFFSET] // Heap reference = 32b |
| // This also zero-extends to x3 |
| cmp w3, w4 // value's type == array's component type - trivial assignability |
| bne .Lcheck_assignability |
| .Ldo_aput: |
| add x3, x0, #OBJECT_ARRAY_DATA_OFFSET |
| // "Compress" = do nothing |
| str w2, [x3, x1, lsl #2] // Heap reference = 32b |
| ldr x3, [xSELF, #THREAD_CARD_TABLE_OFFSET] |
| lsr x0, x0, #7 |
| strb w3, [x3, x0] |
| ret |
| .Ldo_aput_null: |
| add x3, x0, #OBJECT_ARRAY_DATA_OFFSET |
| // "Compress" = do nothing |
| str w2, [x3, x1, lsl #2] // Heap reference = 32b |
| ret |
| .Lcheck_assignability: |
| // Store arguments and link register |
| sub sp, sp, #48 // Stack needs to be 16b aligned on calls |
| .cfi_adjust_cfa_offset 48 |
| stp x0, x1, [sp] |
| .cfi_rel_offset x0, 0 |
| .cfi_rel_offset x1, 8 |
| stp x2, xSELF, [sp, #16] |
| .cfi_rel_offset x2, 16 |
| .cfi_rel_offset x18, 24 |
| str xLR, [sp, #32] |
| .cfi_rel_offset x30, 32 |
| |
| // Call runtime code |
| mov x0, x3 // Heap reference, 32b, "uncompress" = do nothing, already zero-extended |
| mov x1, x4 // Heap reference, 32b, "uncompress" = do nothing, already zero-extended |
| bl artIsAssignableFromCode |
| |
| // Check for exception |
| cbz x0, .Lthrow_array_store_exception |
| |
| // Restore |
| ldp x0, x1, [sp] |
| .cfi_restore x0 |
| .cfi_restore x1 |
| ldp x2, xSELF, [sp, #16] |
| .cfi_restore x2 |
| .cfi_restore x18 |
| ldr xLR, [sp, #32] |
| .cfi_restore x30 |
| add sp, sp, #48 |
| .cfi_adjust_cfa_offset -48 |
| |
| add x3, x0, #OBJECT_ARRAY_DATA_OFFSET |
| // "Compress" = do nothing |
| str w2, [x3, x1, lsl #2] // Heap reference = 32b |
| ldr x3, [xSELF, #THREAD_CARD_TABLE_OFFSET] |
| lsr x0, x0, #7 |
| strb w3, [x3, x0] |
| ret |
| .Lthrow_array_store_exception: |
| ldp x0, x1, [sp] |
| .cfi_restore x0 |
| .cfi_restore x1 |
| ldp x2, xSELF, [sp, #16] |
| .cfi_restore x2 |
| .cfi_restore x18 |
| ldr xLR, [sp, #32] |
| .cfi_restore x30 |
| add sp, sp, #48 |
| .cfi_adjust_cfa_offset -48 |
| |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME |
| mov x1, x2 // Pass value. |
| mov x2, xSELF // Pass Thread::Current. |
| mov x3, sp // Pass SP. |
| b artThrowArrayStoreException // (Object*, Object*, Thread*, SP). |
| brk 0 // Unreached. |
| END art_quick_aput_obj |
| |
| // Macro to facilitate adding new allocation entrypoints. |
| .macro TWO_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case of GC |
| mov x2, xSELF // pass Thread::Current |
| mov x3, sp // pass SP |
| bl \entrypoint // (uint32_t type_idx, Method* method, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| \return |
| DELIVER_PENDING_EXCEPTION |
| END \name |
| .endm |
| |
| // Macro to facilitate adding new array allocation entrypoints. |
| .macro THREE_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case of GC |
| mov x3, xSELF // pass Thread::Current |
| mov x4, sp // pass SP |
| bl \entrypoint |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| \return |
| DELIVER_PENDING_EXCEPTION |
| END \name |
| .endm |
| |
| // Macros taking opportunity of code similarities for downcalls with referrer. |
| |
| // TODO: xSELF -> x19. Temporarily rely on xSELF being saved in REF_ONLY |
| .macro ONE_ARG_REF_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case of GC |
| ldr w1, [sp, #FRAME_SIZE_REFS_ONLY_CALLEE_SAVE] // Load referrer |
| mov x2, xSELF // pass Thread::Current |
| mov x3, sp // pass SP |
| bl \entrypoint // (uint32_t type_idx, Method* method, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| \return |
| END \name |
| .endm |
| |
| // TODO: xSELF -> x19. Temporarily rely on xSELF being saved in REF_ONLY |
| .macro TWO_ARG_REF_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case of GC |
| ldr w2, [sp, #FRAME_SIZE_REFS_ONLY_CALLEE_SAVE] // Load referrer |
| mov x3, xSELF // pass Thread::Current |
| mov x4, sp // pass SP |
| bl \entrypoint |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| \return |
| END \name |
| .endm |
| |
| // TODO: xSELF -> x19. Temporarily rely on xSELF being saved in REF_ONLY |
| .macro THREE_ARG_REF_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case of GC |
| ldr w3, [sp, #FRAME_SIZE_REFS_ONLY_CALLEE_SAVE] // Load referrer |
| mov x4, xSELF // pass Thread::Current |
| mov x5, sp // pass SP |
| bl \entrypoint |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| \return |
| END \name |
| .endm |
| |
| /* |
| * Entry from managed code when uninitialized static storage, this stub will run the class |
| * initializer and deliver the exception on error. On success the static storage base is |
| * returned. |
| */ |
| TWO_ARG_DOWNCALL art_quick_initialize_static_storage, artInitializeStaticStorageFromCode, RETURN_IF_RESULT_IS_NON_ZERO |
| |
| TWO_ARG_DOWNCALL art_quick_initialize_type, artInitializeTypeFromCode, RETURN_IF_RESULT_IS_NON_ZERO |
| TWO_ARG_DOWNCALL art_quick_initialize_type_and_verify_access, artInitializeTypeAndVerifyAccessFromCode, RETURN_IF_RESULT_IS_NON_ZERO |
| |
| ONE_ARG_REF_DOWNCALL art_quick_get32_static, artGet32StaticFromCode, RETURN_OR_DELIVER_PENDING_EXCEPTION_X1 |
| ONE_ARG_REF_DOWNCALL art_quick_get64_static, artGet64StaticFromCode, RETURN_OR_DELIVER_PENDING_EXCEPTION_X1 |
| ONE_ARG_REF_DOWNCALL art_quick_get_obj_static, artGetObjStaticFromCode, RETURN_OR_DELIVER_PENDING_EXCEPTION_X1 |
| |
| TWO_ARG_REF_DOWNCALL art_quick_get32_instance, artGet32InstanceFromCode, RETURN_OR_DELIVER_PENDING_EXCEPTION_X1 |
| TWO_ARG_REF_DOWNCALL art_quick_get64_instance, artGet64InstanceFromCode, RETURN_OR_DELIVER_PENDING_EXCEPTION_X1 |
| TWO_ARG_REF_DOWNCALL art_quick_get_obj_instance, artGetObjInstanceFromCode, RETURN_OR_DELIVER_PENDING_EXCEPTION_X1 |
| |
| TWO_ARG_REF_DOWNCALL art_quick_set32_static, artSet32StaticFromCode, RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| TWO_ARG_REF_DOWNCALL art_quick_set_obj_static, artSetObjStaticFromCode, RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| |
| THREE_ARG_REF_DOWNCALL art_quick_set32_instance, artSet32InstanceFromCode, RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| THREE_ARG_DOWNCALL art_quick_set64_instance, artSet64InstanceFromCode, RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| THREE_ARG_REF_DOWNCALL art_quick_set_obj_instance, artSetObjInstanceFromCode, RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| |
| // This is separated out as the argument order is different. |
| .extern artSet64StaticFromCode |
| ENTRY art_quick_set64_static |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves in case of GC |
| mov x3, x1 // Store value |
| ldr w1, [sp, #FRAME_SIZE_REFS_ONLY_CALLEE_SAVE] // Load referrer |
| mov x2, x3 // Put value param |
| mov x3, xSELF // pass Thread::Current |
| mov x4, sp // pass SP |
| bl artSet64StaticFromCode |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_W0_IS_ZERO_OR_DELIVER |
| END art_quick_set64_static |
| |
| /* |
| * Entry from managed code to resolve a string, this stub will allocate a String and deliver an |
| * exception on error. On success the String is returned. x0 holds the referring method, |
| * w1 holds the string index. The fast path check for hit in strings cache has already been |
| * performed. |
| */ |
| TWO_ARG_DOWNCALL art_quick_resolve_string, artResolveStringFromCode, RETURN_IF_RESULT_IS_NON_ZERO |
| |
| // Generate the allocation entrypoints for each allocator. |
| GENERATE_ALL_ALLOC_ENTRYPOINTS |
| |
| /* |
| * Called by managed code when the value in wSUSPEND has been decremented to 0. |
| */ |
| .extern artTestSuspendFromCode |
| ENTRY art_quick_test_suspend |
| ldrh w0, [xSELF, #THREAD_FLAGS_OFFSET] // get xSELF->state_and_flags.as_struct.flags |
| mov wSUSPEND, #SUSPEND_CHECK_INTERVAL // reset wSUSPEND to SUSPEND_CHECK_INTERVAL |
| cbnz w0, .Lneed_suspend // check flags == 0 |
| ret // return if flags == 0 |
| .Lneed_suspend: |
| mov x0, xSELF |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME // save callee saves for stack crawl |
| mov x1, sp |
| bl artTestSuspendFromCode // (Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME_AND_RETURN |
| END art_quick_test_suspend |
| |
| /* |
| * Called by managed code that is attempting to call a method on a proxy class. On entry |
| * x0 holds the proxy method and x1 holds the receiver; The frame size of the invoked proxy |
| * method agrees with a ref and args callee save frame. |
| */ |
| .extern artQuickProxyInvokeHandler |
| ENTRY art_quick_proxy_invoke_handler |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| str x0, [sp, #0] // place proxy method at bottom of frame |
| mov x2, xSELF // pass Thread::Current |
| mov x3, sp // pass SP |
| bl artQuickProxyInvokeHandler // (Method* proxy method, receiver, Thread*, SP) |
| ldr xSELF, [sp, #200] // Restore self pointer. |
| ldr x2, [xSELF, THREAD_EXCEPTION_OFFSET] |
| cbnz x2, .Lexception_in_proxy // success if no exception is pending |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME // Restore frame |
| fmov d0, x0 // Store result in d0 in case it was float or double |
| ret // return on success |
| .Lexception_in_proxy: |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_proxy_invoke_handler |
| |
| /* |
| * Called to resolve an imt conflict. x12 is a hidden argument that holds the target method's |
| * dex method index. |
| */ |
| ENTRY art_quick_imt_conflict_trampoline |
| ldr w0, [sp, #0] // load caller Method* |
| ldr w0, [x0, #METHOD_DEX_CACHE_METHODS_OFFSET] // load dex_cache_resolved_methods |
| add x0, x0, #OBJECT_ARRAY_DATA_OFFSET // get starting address of data |
| ldr w0, [x0, x12, lsl 2] // load the target method |
| b art_quick_invoke_interface_trampoline |
| END art_quick_imt_conflict_trampoline |
| |
| ENTRY art_quick_resolution_trampoline |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| mov x2, xSELF |
| mov x3, sp |
| bl artQuickResolutionTrampoline // (called, receiver, Thread*, SP) |
| cbz x0, 1f |
| mov x9, x0 // Remember returned code pointer in x9. |
| ldr w0, [sp, #0] // artQuickResolutionTrampoline puts called method in *SP. |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| br x9 |
| 1: |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_resolution_trampoline |
| |
| /* |
| * Generic JNI frame layout: |
| * |
| * #-------------------# |
| * | | |
| * | caller method... | |
| * #-------------------# <--- SP on entry |
| * | Return X30/LR | |
| * | X29/FP | callee save |
| * | X28 | callee save |
| * | X27 | callee save |
| * | X26 | callee save |
| * | X25 | callee save |
| * | X24 | callee save |
| * | X23 | callee save |
| * | X22 | callee save |
| * | X21 | callee save |
| * | X20 | callee save |
| * | X19 | callee save |
| * | X7 | arg7 |
| * | X6 | arg6 |
| * | X5 | arg5 |
| * | X4 | arg4 |
| * | X3 | arg3 |
| * | X2 | arg2 |
| * | X1 | arg1 |
| * | D15 | float arg 8 |
| * | D14 | float arg 8 |
| * | D13 | float arg 8 |
| * | D12 | callee save |
| * | D11 | callee save |
| * | D10 | callee save |
| * | D9 | callee save |
| * | D8 | callee save |
| * | D7 | float arg 8 |
| * | D6 | float arg 7 |
| * | D5 | float arg 6 |
| * | D4 | float arg 5 |
| * | D3 | float arg 4 |
| * | D2 | float arg 3 |
| * | D1 | float arg 2 |
| * | D0 | float arg 1 |
| * | Method* | <- X0 |
| * #-------------------# |
| * | local ref cookie | // 4B |
| * | handle scope size | // 4B |
| * #-------------------# |
| * | JNI Call Stack | |
| * #-------------------# <--- SP on native call |
| * | | |
| * | Stack for Regs | The trampoline assembly will pop these values |
| * | | into registers for native call |
| * #-------------------# |
| * | Native code ptr | |
| * #-------------------# |
| * | Free scratch | |
| * #-------------------# |
| * | Ptr to (1) | <--- SP |
| * #-------------------# |
| */ |
| /* |
| * Called to do a generic JNI down-call |
| */ |
| ENTRY art_quick_generic_jni_trampoline |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME_INTERNAL |
| str x0, [sp, #0] // Store native ArtMethod* to bottom of stack. |
| |
| // Save SP , so we can have static CFI info. |
| mov x28, sp |
| .cfi_def_cfa_register x28 |
| |
| // This looks the same, but is different: this will be updated to point to the bottom |
| // of the frame when the handle scope is inserted. |
| mov xFP, sp |
| |
| mov x8, #5120 |
| sub sp, sp, x8 |
| |
| // prepare for artQuickGenericJniTrampoline call |
| // (Thread*, SP) |
| // x0 x1 <= C calling convention |
| // xSELF xFP <= where they are |
| |
| mov x0, xSELF // Thread* |
| mov x1, xFP |
| bl artQuickGenericJniTrampoline // (Thread*, sp) |
| |
| // Get the updated pointer. This is the bottom of the frame _with_ handle scope. |
| ldr xFP, [sp] |
| add x9, sp, #8 |
| |
| cmp x0, #0 |
| b.mi .Lentry_error // Check for error, negative value. |
| |
| // release part of the alloca. |
| add x9, x9, x0 |
| |
| // Get the code pointer |
| ldr xIP0, [x9, #0] |
| |
| // Load parameters from frame into registers. |
| // TODO Check with artQuickGenericJniTrampoline. |
| // Also, check again APPCS64 - the stack arguments are interleaved. |
| ldp x0, x1, [x9, #8] |
| ldp x2, x3, [x9, #24] |
| ldp x4, x5, [x9, #40] |
| ldp x6, x7, [x9, #56] |
| |
| ldp d0, d1, [x9, #72] |
| ldp d2, d3, [x9, #88] |
| ldp d4, d5, [x9, #104] |
| ldp d6, d7, [x9, #120] |
| |
| add sp, x9, #136 |
| |
| blr xIP0 // native call. |
| |
| // Restore self pointer. |
| ldr xSELF, [x28, #200] |
| |
| // result sign extension is handled in C code |
| // prepare for artQuickGenericJniEndTrampoline call |
| // (Thread*, SP, result, result_f) |
| // x0 x1 x2 x3 <= C calling convention |
| mov x5, x0 // Save return value |
| mov x0, xSELF // Thread register |
| mov x1, xFP // Stack pointer |
| mov x2, x5 // Result (from saved) |
| fmov x3, d0 // d0 will contain floating point result, but needs to go into x3 |
| |
| bl artQuickGenericJniEndTrampoline |
| |
| // Tear down the alloca. |
| mov sp, x28 |
| .cfi_def_cfa_register sp |
| |
| // Restore self pointer. |
| ldr xSELF, [x28, #200] |
| |
| // Pending exceptions possible. |
| ldr x1, [xSELF, THREAD_EXCEPTION_OFFSET] |
| cbnz x1, .Lexception_in_native |
| |
| // Tear down the callee-save frame. |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| |
| // store into fpr, for when it's a fpr return... |
| fmov d0, x0 |
| ret |
| |
| .Lentry_error: |
| mov sp, x28 |
| .cfi_def_cfa_register sp |
| ldr xSELF, [x28, #200] |
| .Lexception_in_native: |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| DELIVER_PENDING_EXCEPTION |
| |
| END art_quick_generic_jni_trampoline |
| |
| /* |
| * Called to bridge from the quick to interpreter ABI. On entry the arguments match those |
| * of a quick call: |
| * x0 = method being called/to bridge to. |
| * x1..x7, d0..d7 = arguments to that method. |
| */ |
| ENTRY art_quick_to_interpreter_bridge |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME // Set up frame and save arguments. |
| |
| // x0 will contain mirror::ArtMethod* method. |
| mov x1, xSELF // How to get Thread::Current() ??? |
| mov x2, sp |
| |
| // uint64_t artQuickToInterpreterBridge(mirror::ArtMethod* method, Thread* self, |
| // mirror::ArtMethod** sp) |
| bl artQuickToInterpreterBridge |
| |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME // TODO: no need to restore arguments in this case. |
| |
| fmov d0, x0 |
| |
| RETURN_OR_DELIVER_PENDING_EXCEPTION |
| END art_quick_to_interpreter_bridge |
| |
| |
| // |
| // Instrumentation-related stubs |
| // |
| .extern artInstrumentationMethodEntryFromCode |
| ENTRY art_quick_instrumentation_entry |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| |
| mov x19, x0 // Preserve method reference in a callee-save. |
| |
| mov x2, xSELF |
| mov x3, sp |
| mov x4, xLR |
| bl artInstrumentationMethodEntryFromCode // (Method*, Object*, Thread*, SP, LR) |
| |
| mov x9, x0 // x0 = result of call. |
| mov x0, x19 // Reload method reference. |
| |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME // Note: will restore xSELF |
| adr xLR, art_quick_instrumentation_exit |
| br x9 // Tail-call method with lr set to art_quick_instrumentation_exit. |
| END art_quick_instrumentation_entry |
| |
| .extern artInstrumentationMethodExitFromCode |
| ENTRY art_quick_instrumentation_exit |
| mov xLR, #0 // Clobber LR for later checks. |
| |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME |
| |
| // We need to save x0 and d0. We could use a callee-save from SETUP_REF_ONLY, but then |
| // we would need to fully restore it. As there are a lot of callee-save registers, it seems |
| // easier to have an extra small stack area. |
| |
| str x19, [sp, #-16]! // Save integer result. |
| .cfi_adjust_cfa_offset 16 |
| str d0, [sp, #8] // Save floating-point result. |
| |
| mov x0, xSELF // Pass Thread. |
| add x1, sp, #16 // Pass SP. |
| mov x2, x0 // Pass integer result. |
| fmov x3, d0 // Pass floating-point result. |
| bl artInstrumentationMethodExitFromCode // (Thread*, SP, gpr_res, fpr_res) |
| |
| mov x9, x0 // Return address from instrumentation call. |
| mov xLR, x1 // r1 is holding link register if we're to bounce to deoptimize |
| |
| ldr d0, [sp, #8] // Restore floating-point result. |
| ldr x0, [sp], 16 // Restore integer result, and drop stack area. |
| .cfi_adjust_cfa_offset 16 |
| |
| POP_REF_ONLY_CALLEE_SAVE_FRAME |
| |
| br x9 // Tail-call out. |
| END art_quick_instrumentation_exit |
| |
| /* |
| * Instrumentation has requested that we deoptimize into the interpreter. The deoptimization |
| * will long jump to the upcall with a special exception of -1. |
| */ |
| .extern artDeoptimize |
| ENTRY art_quick_deoptimize |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME |
| mov x0, xSELF // Pass thread. |
| mov x1, sp // Pass SP. |
| bl artDeoptimize // artDeoptimize(Thread*, SP) |
| END art_quick_deoptimize |
| |
| |
| /* |
| * String's indexOf. |
| * |
| * TODO: Not very optimized. |
| * On entry: |
| * x0: string object (known non-null) |
| * w1: char to match (known <= 0xFFFF) |
| * w2: Starting offset in string data |
| */ |
| ENTRY art_quick_indexof |
| ldr w3, [x0, #STRING_COUNT_OFFSET] |
| ldr w4, [x0, #STRING_OFFSET_OFFSET] |
| ldr w0, [x0, #STRING_VALUE_OFFSET] // x0 ? |
| |
| /* Clamp start to [0..count] */ |
| cmp w2, #0 |
| csel w2, wzr, w2, lt |
| cmp w2, w3 |
| csel w2, w3, w2, gt |
| |
| /* Build a pointer to the start of the string data */ |
| add x0, x0, #STRING_DATA_OFFSET |
| add x0, x0, x4, lsl #1 |
| |
| /* Save a copy to compute result */ |
| mov x5, x0 |
| |
| /* Build pointer to start of data to compare and pre-bias */ |
| add x0, x0, x2, lsl #1 |
| sub x0, x0, #2 |
| |
| /* Compute iteration count */ |
| sub w2, w3, w2 |
| |
| /* |
| * At this point we have: |
| * x0: start of the data to test |
| * w1: char to compare |
| * w2: iteration count |
| * x5: original start of string data |
| */ |
| |
| subs w2, w2, #4 |
| b.lt .Lindexof_remainder |
| |
| .Lindexof_loop4: |
| ldrh w6, [x0, #2]! |
| ldrh w7, [x0, #2]! |
| ldrh w8, [x0, #2]! |
| ldrh w9, [x0, #2]! |
| cmp w6, w1 |
| b.eq .Lmatch_0 |
| cmp w7, w1 |
| b.eq .Lmatch_1 |
| cmp w8, w1 |
| b.eq .Lmatch_2 |
| cmp w9, w1 |
| b.eq .Lmatch_3 |
| subs w2, w2, #4 |
| b.ge .Lindexof_loop4 |
| |
| .Lindexof_remainder: |
| adds w2, w2, #4 |
| b.eq .Lindexof_nomatch |
| |
| .Lindexof_loop1: |
| ldrh w6, [x0, #2]! |
| cmp w6, w1 |
| b.eq .Lmatch_3 |
| subs w2, w2, #1 |
| b.ne .Lindexof_loop1 |
| |
| .Lindexof_nomatch: |
| mov x0, #-1 |
| ret |
| |
| .Lmatch_0: |
| sub x0, x0, #6 |
| sub x0, x0, x5 |
| asr x0, x0, #1 |
| ret |
| .Lmatch_1: |
| sub x0, x0, #4 |
| sub x0, x0, x5 |
| asr x0, x0, #1 |
| ret |
| .Lmatch_2: |
| sub x0, x0, #2 |
| sub x0, x0, x5 |
| asr x0, x0, #1 |
| ret |
| .Lmatch_3: |
| sub x0, x0, x5 |
| asr x0, x0, #1 |
| ret |
| END art_quick_indexof |
| |
| /* |
| * String's compareTo. |
| * |
| * TODO: Not very optimized. |
| * |
| * On entry: |
| * x0: this object pointer |
| * x1: comp object pointer |
| * |
| */ |
| .extern memcmp16_generic_static |
| ENTRY art_quick_string_compareto |
| mov x2, x0 // x0 is return, use x2 for first input. |
| sub x0, x2, x1 // Same string object? |
| cbnz x0,1f |
| ret |
| 1: // Different string objects. |
| |
| ldr w6, [x2, #STRING_OFFSET_OFFSET] |
| ldr w5, [x1, #STRING_OFFSET_OFFSET] |
| ldr w4, [x2, #STRING_COUNT_OFFSET] |
| ldr w3, [x1, #STRING_COUNT_OFFSET] |
| ldr w2, [x2, #STRING_VALUE_OFFSET] |
| ldr w1, [x1, #STRING_VALUE_OFFSET] |
| |
| /* |
| * Now: CharArray* Offset Count |
| * first arg x2 w6 w4 |
| * second arg x1 w5 w3 |
| */ |
| |
| // x0 := str1.length(w4) - str2.length(w3). ldr zero-extended w3/w4 into x3/x4. |
| subs x0, x4, x3 |
| // Min(count1, count2) into w3. |
| csel x3, x3, x4, ge |
| |
| // Build pointer into string data. |
| |
| // Add offset in array (substr etc.) (sign extend and << 1). |
| add x2, x2, w6, sxtw #1 |
| add x1, x1, w5, sxtw #1 |
| |
| // Add offset in CharArray to array. |
| add x2, x2, #STRING_DATA_OFFSET |
| add x1, x1, #STRING_DATA_OFFSET |
| |
| // TODO: Tune this value. |
| // Check for long string, do memcmp16 for them. |
| cmp w3, #28 // Constant from arm32. |
| bgt .Ldo_memcmp16 |
| |
| /* |
| * Now: |
| * x2: *first string data |
| * x1: *second string data |
| * w3: iteration count |
| * x0: return value if comparison equal |
| * x4, x5, x6, x7: free |
| */ |
| |
| // Do a simple unrolled loop. |
| .Lloop: |
| // At least two more elements? |
| subs w3, w3, #2 |
| b.lt .Lremainder_or_done |
| |
| ldrh w4, [x2], #2 |
| ldrh w5, [x1], #2 |
| |
| ldrh w6, [x2], #2 |
| ldrh w7, [x1], #2 |
| |
| subs w4, w4, w5 |
| b.ne .Lw4_result |
| |
| subs w6, w6, w7 |
| b.ne .Lw6_result |
| |
| b .Lloop |
| |
| .Lremainder_or_done: |
| adds w3, w3, #1 |
| b.eq .Lremainder |
| ret |
| |
| .Lremainder: |
| ldrh w4, [x2], #2 |
| ldrh w5, [x1], #2 |
| subs w4, w4, w5 |
| b.ne .Lw4_result |
| ret |
| |
| // Result is in w4 |
| .Lw4_result: |
| sxtw x0, w4 |
| ret |
| |
| // Result is in w6 |
| .Lw6_result: |
| sxtw x0, w6 |
| ret |
| |
| .Ldo_memcmp16: |
| str x0, [sp,#-16]! // Save x0 |
| |
| mov x0, x2 |
| uxtw x2, w3 |
| bl memcmp16_generic_static |
| |
| ldr x1, [sp], #16 // Restore old x0 = length diff |
| |
| cmp x0, #0 // Check the memcmp difference |
| csel x0, x0, x1, ne // x0 := x0 != 0 ? x0 : x1 |
| ret |
| END art_quick_string_compareto |
| |
| // Macro to facilitate adding new entrypoints which call to native function directly. |
| // Currently, xSELF is the only thing we need to take care of between managed code and AAPCS. |
| // But we might introduce more differences. |
| .macro NATIVE_DOWNCALL name, entrypoint |
| .extern \entrypoint |
| ENTRY \name |
| sub sp, sp, #16 |
| stp xSELF, xLR, [sp] |
| bl \entrypoint |
| ldp xSELF, xLR, [sp] |
| add sp, sp, #16 |
| ret |
| END \name |
| .endm |
| |
| NATIVE_DOWNCALL art_quick_fmod fmod |
| NATIVE_DOWNCALL art_quick_fmodf fmodf |
| NATIVE_DOWNCALL art_quick_memcpy memcpy |