| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "dex_instruction-inl.h" |
| |
| #include "dex_file-inl.h" |
| #include "utils.h" |
| #include <iomanip> |
| |
| namespace art { |
| |
| const char* const Instruction::kInstructionNames[] = { |
| #define INSTRUCTION_NAME(o, c, pname, f, r, i, a, v) pname, |
| #include "dex_instruction_list.h" |
| DEX_INSTRUCTION_LIST(INSTRUCTION_NAME) |
| #undef DEX_INSTRUCTION_LIST |
| #undef INSTRUCTION_NAME |
| }; |
| |
| Instruction::Format const Instruction::kInstructionFormats[] = { |
| #define INSTRUCTION_FORMAT(o, c, p, format, r, i, a, v) format, |
| #include "dex_instruction_list.h" |
| DEX_INSTRUCTION_LIST(INSTRUCTION_FORMAT) |
| #undef DEX_INSTRUCTION_LIST |
| #undef INSTRUCTION_FORMAT |
| }; |
| |
| int const Instruction::kInstructionFlags[] = { |
| #define INSTRUCTION_FLAGS(o, c, p, f, r, i, flags, v) flags, |
| #include "dex_instruction_list.h" |
| DEX_INSTRUCTION_LIST(INSTRUCTION_FLAGS) |
| #undef DEX_INSTRUCTION_LIST |
| #undef INSTRUCTION_FLAGS |
| }; |
| |
| int const Instruction::kInstructionVerifyFlags[] = { |
| #define INSTRUCTION_VERIFY_FLAGS(o, c, p, f, r, i, a, vflags) vflags, |
| #include "dex_instruction_list.h" |
| DEX_INSTRUCTION_LIST(INSTRUCTION_VERIFY_FLAGS) |
| #undef DEX_INSTRUCTION_LIST |
| #undef INSTRUCTION_VERIFY_FLAGS |
| }; |
| |
| int const Instruction::kInstructionSizeInCodeUnits[] = { |
| #define INSTRUCTION_SIZE(opcode, c, p, format, r, i, a, v) \ |
| ((opcode == NOP) ? -1 : \ |
| ((format >= k10x) && (format <= k10t)) ? 1 : \ |
| ((format >= k20t) && (format <= k22c)) ? 2 : \ |
| ((format >= k32x) && (format <= k3rc)) ? 3 : \ |
| (format == k51l) ? 5 : -1), |
| #include "dex_instruction_list.h" |
| DEX_INSTRUCTION_LIST(INSTRUCTION_SIZE) |
| #undef DEX_INSTRUCTION_LIST |
| #undef INSTRUCTION_SIZE |
| }; |
| |
| /* |
| * Handy macros for helping decode instructions. |
| */ |
| #define FETCH(_offset) (insns[(_offset)]) |
| #define FETCH_uint32(_offset) (fetch_uint32_impl((_offset), insns)) |
| #define INST_A(_insn) (((uint16_t)(_insn) >> 8) & 0x0f) |
| #define INST_B(_insn) ((uint16_t)(_insn) >> 12) |
| #define INST_AA(_insn) ((_insn) >> 8) |
| |
| /* Helper for FETCH_uint32, above. */ |
| static inline uint32_t fetch_uint32_impl(uint32_t offset, const uint16_t* insns) { |
| return insns[offset] | ((uint32_t) insns[offset+1] << 16); |
| } |
| |
| |
| bool Instruction::HasVRegC() const { |
| switch (FormatOf(Opcode())) { |
| case k23x: return true; |
| case k35c: return true; |
| case k3rc: return true; |
| default: return false; |
| } |
| } |
| |
| bool Instruction::HasVRegB() const { |
| switch (FormatOf(Opcode())) { |
| case k12x: return true; |
| case k22b: return true; |
| case k22c: return true; |
| case k22s: return true; |
| case k22t: return true; |
| case k22x: return true; |
| case k23x: return true; |
| case k32x: return true; |
| default: return false; |
| } |
| } |
| |
| bool Instruction::HasVRegA() const { |
| switch (FormatOf(Opcode())) { |
| case k11n: return true; |
| case k11x: return true; |
| case k12x: return true; |
| case k21c: return true; |
| case k21h: return true; |
| case k21s: return true; |
| case k21t: return true; |
| case k22b: return true; |
| case k22c: return true; |
| case k22s: return true; |
| case k22t: return true; |
| case k22x: return true; |
| case k23x: return true; |
| case k31c: return true; |
| case k31i: return true; |
| case k31t: return true; |
| case k32x: return true; |
| case k51l: return true; |
| default: return false; |
| } |
| } |
| |
| int32_t Instruction::VRegC() const { |
| switch (FormatOf(Opcode())) { |
| case k23x: return VRegC_23x(); |
| case k35c: return VRegC_35c(); |
| case k3rc: return VRegC_3rc(); |
| default: LOG(FATAL) << "Tried to access vC of instruction " << Name() << |
| " which has no C operand."; |
| } |
| return -1; |
| } |
| |
| int32_t Instruction::VRegB() const { |
| switch (FormatOf(Opcode())) { |
| case k12x: return VRegB_12x(); |
| case k22b: return VRegB_22b(); |
| case k22c: return VRegB_22c(); |
| case k22s: return VRegB_22s(); |
| case k22t: return VRegB_22t(); |
| case k22x: return VRegB_22x(); |
| case k23x: return VRegB_23x(); |
| case k32x: return VRegB_32x(); |
| default: LOG(FATAL) << "Tried to access vB of instruction " << Name() << |
| " which has no B operand."; |
| } |
| return -1; |
| } |
| |
| int32_t Instruction::VRegA() const { |
| switch (FormatOf(Opcode())) { |
| case k11n: return VRegA_11n(); |
| case k11x: return VRegA_11x(); |
| case k12x: return VRegA_12x(); |
| case k21c: return VRegA_21c(); |
| case k21h: return VRegA_21h(); |
| case k21s: return VRegA_21s(); |
| case k21t: return VRegA_21t(); |
| case k22b: return VRegA_22b(); |
| case k22c: return VRegA_22c(); |
| case k22s: return VRegA_22s(); |
| case k22t: return VRegA_22t(); |
| case k22x: return VRegA_22x(); |
| case k23x: return VRegA_23x(); |
| case k31c: return VRegA_31c(); |
| case k31i: return VRegA_31i(); |
| case k31t: return VRegA_31t(); |
| case k32x: return VRegA_32x(); |
| case k51l: return VRegA_51l(); |
| default: LOG(FATAL) << "Tried to access vA of instruction " << Name() << |
| " which has no A operand."; |
| } |
| return -1; |
| } |
| |
| int32_t Instruction::GetTargetOffset() const { |
| switch (FormatOf(Opcode())) { |
| // Cases for conditional branches follow. |
| case k22t: return VRegC_22t(); |
| case k21t: return VRegB_21t(); |
| // Cases for unconditional branches follow. |
| case k10t: return VRegA_10t(); |
| case k20t: return VRegA_20t(); |
| case k30t: return VRegA_30t(); |
| default: LOG(FATAL) << "Tried to access the branch offset of an instruction " << Name() << |
| " which does not have a target operand."; |
| } |
| return 0; |
| } |
| |
| bool Instruction::CanFlowThrough() const { |
| const uint16_t* insns = reinterpret_cast<const uint16_t*>(this); |
| uint16_t insn = *insns; |
| Code opcode = static_cast<Code>(insn & 0xFF); |
| return FlagsOf(opcode) & Instruction::kContinue; |
| } |
| |
| void Instruction::Decode(uint32_t &vA, uint32_t &vB, uint64_t &vB_wide, uint32_t &vC, uint32_t arg[]) const { |
| const uint16_t* insns = reinterpret_cast<const uint16_t*>(this); |
| uint16_t insn = *insns; |
| Code opcode = static_cast<Code>(insn & 0xFF); |
| |
| switch (FormatOf(opcode)) { |
| case k10x: // op |
| /* nothing to do; copy the AA bits out for the verifier */ |
| vA = INST_AA(insn); |
| break; |
| case k12x: // op vA, vB |
| vA = INST_A(insn); |
| vB = INST_B(insn); |
| break; |
| case k11n: // op vA, #+B |
| vA = INST_A(insn); |
| vB = (int32_t) (INST_B(insn) << 28) >> 28; // sign extend 4-bit value |
| break; |
| case k11x: // op vAA |
| vA = INST_AA(insn); |
| break; |
| case k10t: // op +AA |
| vA = (int8_t) INST_AA(insn); // sign-extend 8-bit value |
| break; |
| case k20t: // op +AAAA |
| vA = (int16_t) FETCH(1); // sign-extend 16-bit value |
| break; |
| case k21c: // op vAA, thing@BBBB |
| case k22x: // op vAA, vBBBB |
| vA = INST_AA(insn); |
| vB = FETCH(1); |
| break; |
| case k21s: // op vAA, #+BBBB |
| case k21t: // op vAA, +BBBB |
| vA = INST_AA(insn); |
| vB = (int16_t) FETCH(1); // sign-extend 16-bit value |
| break; |
| case k21h: // op vAA, #+BBBB0000[00000000] |
| vA = INST_AA(insn); |
| /* |
| * The value should be treated as right-zero-extended, but we don't |
| * actually do that here. Among other things, we don't know if it's |
| * the top bits of a 32- or 64-bit value. |
| */ |
| vB = FETCH(1); |
| break; |
| case k23x: // op vAA, vBB, vCC |
| vA = INST_AA(insn); |
| vB = FETCH(1) & 0xff; |
| vC = FETCH(1) >> 8; |
| break; |
| case k22b: // op vAA, vBB, #+CC |
| vA = INST_AA(insn); |
| vB = FETCH(1) & 0xff; |
| vC = (int8_t) (FETCH(1) >> 8); // sign-extend 8-bit value |
| break; |
| case k22s: // op vA, vB, #+CCCC |
| case k22t: // op vA, vB, +CCCC |
| vA = INST_A(insn); |
| vB = INST_B(insn); |
| vC = (int16_t) FETCH(1); // sign-extend 16-bit value |
| break; |
| case k22c: // op vA, vB, thing@CCCC |
| vA = INST_A(insn); |
| vB = INST_B(insn); |
| vC = FETCH(1); |
| break; |
| case k30t: // op +AAAAAAAA |
| vA = FETCH_uint32(1); // signed 32-bit value |
| break; |
| case k31t: // op vAA, +BBBBBBBB |
| case k31c: // op vAA, string@BBBBBBBB |
| vA = INST_AA(insn); |
| vB = FETCH_uint32(1); // 32-bit value |
| break; |
| case k32x: // op vAAAA, vBBBB |
| vA = FETCH(1); |
| vB = FETCH(2); |
| break; |
| case k31i: // op vAA, #+BBBBBBBB |
| vA = INST_AA(insn); |
| vB = FETCH_uint32(1); // signed 32-bit value |
| break; |
| case k35c: // op {vC, vD, vE, vF, vG}, thing@BBBB |
| { |
| /* |
| * Note that the fields mentioned in the spec don't appear in |
| * their "usual" positions here compared to most formats. This |
| * was done so that the field names for the argument count and |
| * reference index match between this format and the corresponding |
| * range formats (3rc and friends). |
| * |
| * Bottom line: The argument count is always in vA, and the |
| * method constant (or equivalent) is always in vB. |
| */ |
| uint16_t regList; |
| int count; |
| |
| vA = INST_B(insn); // This is labeled A in the spec. |
| vB = FETCH(1); |
| regList = FETCH(2); |
| |
| count = vA; |
| |
| /* |
| * Copy the argument registers into the arg[] array, and |
| * also copy the first argument (if any) into vC. (The |
| * DecodedInstruction structure doesn't have separate |
| * fields for {vD, vE, vF, vG}, so there's no need to make |
| * copies of those.) Note that cases 5..2 fall through. |
| */ |
| switch (count) { |
| case 5: arg[4] = INST_A(insn); |
| case 4: arg[3] = (regList >> 12) & 0x0f; |
| case 3: arg[2] = (regList >> 8) & 0x0f; |
| case 2: arg[1] = (regList >> 4) & 0x0f; |
| case 1: vC = arg[0] = regList & 0x0f; break; |
| case 0: break; // Valid, but no need to do anything. |
| default: |
| LOG(ERROR) << "Invalid arg count in 35c (" << count << ")"; |
| return; |
| } |
| } |
| break; |
| case k3rc: // op {vCCCC .. v(CCCC+AA-1)}, meth@BBBB |
| vA = INST_AA(insn); |
| vB = FETCH(1); |
| vC = FETCH(2); |
| break; |
| case k51l: // op vAA, #+BBBBBBBBBBBBBBBB |
| vA = INST_AA(insn); |
| vB_wide = FETCH_uint32(1) | ((uint64_t) FETCH_uint32(3) << 32); |
| break; |
| default: |
| LOG(ERROR) << "Can't decode unexpected format " << FormatOf(opcode) << " (op=" << opcode << ")"; |
| return; |
| } |
| } |
| |
| size_t Instruction::SizeInCodeUnitsComplexOpcode() const { |
| const uint16_t* insns = reinterpret_cast<const uint16_t*>(this); |
| // Handle special NOP encoded variable length sequences. |
| switch (*insns) { |
| case kPackedSwitchSignature: |
| return (4 + insns[1] * 2); |
| case kSparseSwitchSignature: |
| return (2 + insns[1] * 4); |
| case kArrayDataSignature: { |
| uint16_t element_size = insns[1]; |
| uint32_t length = insns[2] | (((uint32_t)insns[3]) << 16); |
| // The plus 1 is to round up for odd size and width. |
| return (4 + (element_size * length + 1) / 2); |
| } |
| default: |
| if ((*insns & 0xFF) == 0) { |
| return 1; // NOP. |
| } else { |
| LOG(FATAL) << "Unreachable: " << DumpString(NULL); |
| return 0; |
| } |
| } |
| } |
| |
| std::string Instruction::DumpHex(size_t code_units) const { |
| size_t inst_length = SizeInCodeUnits(); |
| if (inst_length > code_units) { |
| inst_length = code_units; |
| } |
| std::ostringstream os; |
| const uint16_t* insn = reinterpret_cast<const uint16_t*>(this); |
| for (size_t i = 0; i < inst_length; i++) { |
| os << StringPrintf("0x%04x", insn[i]) << " "; |
| } |
| for (size_t i = inst_length; i < code_units; i++) { |
| os << " "; |
| } |
| return os.str(); |
| } |
| |
| std::string Instruction::DumpString(const DexFile* file) const { |
| std::ostringstream os; |
| const char* opcode = kInstructionNames[Opcode()]; |
| switch (FormatOf(Opcode())) { |
| case k10x: os << opcode; break; |
| case k12x: os << StringPrintf("%s v%d, v%d", opcode, VRegA_12x(), VRegB_12x()); break; |
| case k11n: os << StringPrintf("%s v%d, #%+d", opcode, VRegA_11n(), VRegB_11n()); break; |
| case k11x: os << StringPrintf("%s v%d", opcode, VRegA_11x()); break; |
| case k10t: os << StringPrintf("%s %+d", opcode, VRegA_10t()); break; |
| case k20t: os << StringPrintf("%s %+d", opcode, VRegA_20t()); break; |
| case k22x: os << StringPrintf("%s v%d, v%d", opcode, VRegA_22x(), VRegB_22x()); break; |
| case k21t: os << StringPrintf("%s v%d, %+d", opcode, VRegA_21t(), VRegB_21t()); break; |
| case k21s: os << StringPrintf("%s v%d, #%+d", opcode, VRegA_21s(), VRegB_21s()); break; |
| case k21h: { |
| // op vAA, #+BBBB0000[00000000] |
| if (Opcode() == CONST_HIGH16) { |
| uint32_t value = VRegB_21h() << 16; |
| os << StringPrintf("%s v%d, #int %+d // 0x%x", opcode, VRegA_21h(), value, value); |
| } else { |
| uint64_t value = static_cast<uint64_t>(VRegB_21h()) << 48; |
| os << StringPrintf("%s v%d, #long %+lld // 0x%llx", opcode, VRegA_21h(), value, value); |
| } |
| } |
| break; |
| case k21c: { |
| switch (Opcode()) { |
| case CONST_STRING: |
| if (file != NULL) { |
| uint32_t string_idx = VRegB_21c(); |
| os << StringPrintf("const-string v%d, %s // string@%d", VRegA_21c(), |
| PrintableString(file->StringDataByIdx(string_idx)).c_str(), string_idx); |
| break; |
| } // else fall-through |
| case CHECK_CAST: |
| case CONST_CLASS: |
| case NEW_INSTANCE: |
| if (file != NULL) { |
| uint32_t type_idx = VRegB_21c(); |
| os << opcode << " v" << static_cast<int>(VRegA_21c()) << ", " << PrettyType(type_idx, *file) |
| << " // type@" << type_idx; |
| break; |
| } // else fall-through |
| case SGET: |
| case SGET_WIDE: |
| case SGET_OBJECT: |
| case SGET_BOOLEAN: |
| case SGET_BYTE: |
| case SGET_CHAR: |
| case SGET_SHORT: |
| if (file != NULL) { |
| uint32_t field_idx = VRegB_21c(); |
| os << opcode << " v" << static_cast<int>(VRegA_21c()) << ", " << PrettyField(field_idx, *file, true) |
| << " // field@" << field_idx; |
| break; |
| } // else fall-through |
| case SPUT: |
| case SPUT_WIDE: |
| case SPUT_OBJECT: |
| case SPUT_BOOLEAN: |
| case SPUT_BYTE: |
| case SPUT_CHAR: |
| case SPUT_SHORT: |
| if (file != NULL) { |
| uint32_t field_idx = VRegB_21c(); |
| os << opcode << " v" << static_cast<int>(VRegA_21c()) << ", " << PrettyField(field_idx, *file, true) |
| << " // field@" << field_idx; |
| break; |
| } // else fall-through |
| default: |
| os << StringPrintf("%s v%d, thing@%d", opcode, VRegA_21c(), VRegB_21c()); |
| break; |
| } |
| break; |
| } |
| case k23x: os << StringPrintf("%s v%d, v%d, v%d", opcode, VRegA_23x(), VRegB_23x(), VRegC_23x()); break; |
| case k22b: os << StringPrintf("%s v%d, v%d, #%+d", opcode, VRegA_22b(), VRegB_22b(), VRegC_22b()); break; |
| case k22t: os << StringPrintf("%s v%d, v%d, %+d", opcode, VRegA_22t(), VRegB_22t(), VRegC_22t()); break; |
| case k22s: os << StringPrintf("%s v%d, v%d, #%+d", opcode, VRegA_22s(), VRegB_22s(), VRegC_22s()); break; |
| case k22c: { |
| switch (Opcode()) { |
| case IGET: |
| case IGET_WIDE: |
| case IGET_OBJECT: |
| case IGET_BOOLEAN: |
| case IGET_BYTE: |
| case IGET_CHAR: |
| case IGET_SHORT: |
| if (file != NULL) { |
| uint32_t field_idx = VRegC_22c(); |
| os << opcode << " v" << static_cast<int>(VRegA_22c()) << ", v" << static_cast<int>(VRegB_22c()) << ", " |
| << PrettyField(field_idx, *file, true) << " // field@" << field_idx; |
| break; |
| } // else fall-through |
| case IGET_QUICK: |
| case IGET_OBJECT_QUICK: |
| if (file != NULL) { |
| uint32_t field_idx = VRegC_22c(); |
| os << opcode << " v" << static_cast<int>(VRegA_22c()) << ", v" << static_cast<int>(VRegB_22c()) << ", " |
| << "// offset@" << field_idx; |
| break; |
| } // else fall-through |
| case IPUT: |
| case IPUT_WIDE: |
| case IPUT_OBJECT: |
| case IPUT_BOOLEAN: |
| case IPUT_BYTE: |
| case IPUT_CHAR: |
| case IPUT_SHORT: |
| if (file != NULL) { |
| uint32_t field_idx = VRegC_22c(); |
| os << opcode << " v" << static_cast<int>(VRegA_22c()) << ", v" << static_cast<int>(VRegB_22c()) << ", " |
| << PrettyField(field_idx, *file, true) << " // field@" << field_idx; |
| break; |
| } // else fall-through |
| case IPUT_QUICK: |
| case IPUT_OBJECT_QUICK: |
| if (file != NULL) { |
| uint32_t field_idx = VRegC_22c(); |
| os << opcode << " v" << static_cast<int>(VRegA_22c()) << ", v" << static_cast<int>(VRegB_22c()) << ", " |
| << "// offset@" << field_idx; |
| break; |
| } // else fall-through |
| case INSTANCE_OF: |
| if (file != NULL) { |
| uint32_t type_idx = VRegC_22c(); |
| os << opcode << " v" << static_cast<int>(VRegA_22c()) << ", v" << static_cast<int>(VRegB_22c()) << ", " |
| << PrettyType(type_idx, *file) << " // type@" << type_idx; |
| break; |
| } |
| case NEW_ARRAY: |
| if (file != NULL) { |
| uint32_t type_idx = VRegC_22c(); |
| os << opcode << " v" << static_cast<int>(VRegA_22c()) << ", v" << static_cast<int>(VRegB_22c()) << ", " |
| << PrettyType(type_idx, *file) << " // type@" << type_idx; |
| break; |
| } // else fall-through |
| default: |
| os << StringPrintf("%s v%d, v%d, thing@%d", opcode, VRegA_22c(), VRegB_22c(), VRegC_22c()); |
| break; |
| } |
| break; |
| } |
| case k32x: os << StringPrintf("%s v%d, v%d", opcode, VRegA_32x(), VRegB_32x()); break; |
| case k30t: os << StringPrintf("%s %+d", opcode, VRegA_30t()); break; |
| case k31t: os << StringPrintf("%s v%d, %+d", opcode, VRegA_31t(), VRegB_31t()); break; |
| case k31i: os << StringPrintf("%s v%d, #%+d", opcode, VRegA_31i(), VRegB_31i()); break; |
| case k31c: os << StringPrintf("%s v%d, thing@%d", opcode, VRegA_31c(), VRegB_31c()); break; |
| case k35c: { |
| uint32_t arg[5]; |
| GetArgs(arg); |
| switch (Opcode()) { |
| case INVOKE_VIRTUAL: |
| case INVOKE_SUPER: |
| case INVOKE_DIRECT: |
| case INVOKE_STATIC: |
| case INVOKE_INTERFACE: |
| if (file != NULL) { |
| os << opcode << " {"; |
| uint32_t method_idx = VRegB_35c(); |
| for (size_t i = 0; i < VRegA_35c(); ++i) { |
| if (i != 0) { |
| os << ", "; |
| } |
| os << "v" << arg[i]; |
| } |
| os << "}, " << PrettyMethod(method_idx, *file) << " // method@" << method_idx; |
| break; |
| } // else fall-through |
| case INVOKE_VIRTUAL_QUICK: |
| if (file != NULL) { |
| os << opcode << " {"; |
| uint32_t method_idx = VRegB_35c(); |
| for (size_t i = 0; i < VRegA_35c(); ++i) { |
| if (i != 0) { |
| os << ", "; |
| } |
| os << "v" << arg[i]; |
| } |
| os << "}, // vtable@" << method_idx; |
| break; |
| } // else fall-through |
| default: |
| os << opcode << " {v" << arg[0] << ", v" << arg[1] << ", v" << arg[2] |
| << ", v" << arg[3] << ", v" << arg[4] << "}, thing@" << VRegB_35c(); |
| break; |
| } |
| break; |
| } |
| case k3rc: { |
| switch (Opcode()) { |
| case INVOKE_VIRTUAL_RANGE: |
| case INVOKE_SUPER_RANGE: |
| case INVOKE_DIRECT_RANGE: |
| case INVOKE_STATIC_RANGE: |
| case INVOKE_INTERFACE_RANGE: |
| if (file != NULL) { |
| uint32_t method_idx = VRegB_3rc(); |
| os << StringPrintf("%s, {v%d .. v%d}, ", opcode, VRegC_3rc(), (VRegC_3rc() + VRegA_3rc() - 1)) |
| << PrettyMethod(method_idx, *file) << " // method@" << method_idx; |
| break; |
| } // else fall-through |
| case INVOKE_VIRTUAL_RANGE_QUICK: |
| if (file != NULL) { |
| uint32_t method_idx = VRegB_3rc(); |
| os << StringPrintf("%s, {v%d .. v%d}, ", opcode, VRegC_3rc(), (VRegC_3rc() + VRegA_3rc() - 1)) |
| << "// vtable@" << method_idx; |
| break; |
| } // else fall-through |
| default: |
| os << StringPrintf("%s, {v%d .. v%d}, thing@%d", opcode, VRegC_3rc(), |
| (VRegC_3rc() + VRegA_3rc() - 1), VRegB_3rc()); |
| break; |
| } |
| break; |
| } |
| case k51l: os << StringPrintf("%s v%d, #%+lld", opcode, VRegA_51l(), VRegB_51l()); break; |
| default: os << " unknown format (" << DumpHex(5) << ")"; break; |
| } |
| return os.str(); |
| } |
| |
| std::ostream& operator<<(std::ostream& os, const Instruction::Code& code) { |
| return os << Instruction::Name(code); |
| } |
| |
| } // namespace art |