core/cleanbuild.mk - platform/build - Gitiles

 # Copyright (C) 2007 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 INTERNAL_CLEAN_STEPS :=

 # Builds up a list of clean steps.  Creates a unique
 # id for each step by taking INTERNAL_CLEAN_BUILD_VERSION
 # and appending an increasing number of '@' characters.
 #
 # $(1): shell command to run
 define _add-clean-step
   $(if $(strip $(INTERNAL_CLEAN_BUILD_VERSION)),, \
       $(error INTERNAL_CLEAN_BUILD_VERSION not set))
   $(eval _acs_id := $(strip $(lastword $(INTERNAL_CLEAN_STEPS))))
   $(if $(_acs_id),,$(eval _acs_id := $(INTERNAL_CLEAN_BUILD_VERSION)))
   $(eval _acs_id := $(_acs_id)@)
   $(eval INTERNAL_CLEAN_STEPS += $(_acs_id))
   $(eval INTERNAL_CLEAN_STEP.$(_acs_id) := $(1))
   $(eval _acs_id :=)
 endef
 define add-clean-step
 $(if $(call _add-clean-step,$(1)),)
 endef

 # Defines INTERNAL_CLEAN_BUILD_VERSION and the individual clean steps.
 # cleanspec.mk is outside of the core directory so that more people
 # can have permission to touch it.
 include build/cleanspec.mk
 INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION))

 # If the clean_steps.mk file is missing (usually after a clean build)
 # then we won't do anything.
 CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)
 CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)

 # Read the current state from the file, if present.
 # Will set CURRENT_CLEAN_BUILD_VERSION and CURRENT_CLEAN_STEPS.
 #
 clean_steps_file := $(PRODUCT_OUT)/clean_steps.mk
 -include $(clean_steps_file)

 ifneq ($(CURRENT_CLEAN_BUILD_VERSION),$(INTERNAL_CLEAN_BUILD_VERSION))
   # The major clean version is out-of-date.  Do a full clean, and
   # don't even bother with the clean steps.
   $(info *** A clean build is required because of a recent change.)
   $(shell rm -rf $(OUT_DIR))
   $(info *** Done with the cleaning, now starting the real build.)
 else
   # The major clean version is correct.  Find the list of clean steps
   # that we need to execute to get up-to-date.
   steps := \
       $(filter-out $(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_STEPS))
   $(foreach step,$(steps), \
     $(info Clean step: $(INTERNAL_CLEAN_STEP.$(step))) \
     $(shell $(INTERNAL_CLEAN_STEP.$(step))) \
    )
   steps :=
 endif
 CURRENT_CLEAN_BUILD_VERSION :=
 CURRENT_CLEAN_STEPS :=

 # Write the new state to the file.
 #
 $(shell \
   mkdir -p $(dir $(clean_steps_file)) && \
   echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \
       $(clean_steps_file) ;\
   echo "CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)" >> \
       $(clean_steps_file) \
  )

 clean_steps_file :=
 INTERNAL_CLEAN_STEPS :=
 INTERNAL_CLEAN_BUILD_VERSION :=


 # Since products and build variants (unfortunately) share the same
 # PRODUCT_OUT staging directory, things can get out of sync if different
 # build configurations are built in the same tree.  The following logic
 # will notice when the configuration has changed and remove the files
 # necessary to keep things consistent.

 previous_build_config_file := $(PRODUCT_OUT)/previous_build_config.mk

 # TODO: this special case for the sdk is only necessary while "sdk"
 # is a valid make target.  Eventually, it will just be a product, at
 # which point TARGET_PRODUCT will handle it and we can avoid this check
 # of MAKECMDGOALS.  The "addprefix" is just to keep things pretty.
 ifneq ($(TARGET_PRODUCT),sdk)
   building_sdk := $(addprefix -,$(filter sdk,$(MAKECMDGOALS)))
 else
   # Don't bother with this extra part when explicitly building the sdk product.
   building_sdk :=
 endif

 # A change in the list of locales warrants an installclean, too.
 locale_list := $(subst $(space),$(comma),$(strip $(PRODUCT_LOCALES)))

 current_build_config := \
     $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)$(building_sdk)-{$(locale_list)}
 building_sdk :=
 locale_list :=
 force_installclean := false

 # Read the current state from the file, if present.
 # Will set PREVIOUS_BUILD_CONFIG.
 #
 PREVIOUS_BUILD_CONFIG :=
 -include $(previous_build_config_file)
 PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG))
 ifdef PREVIOUS_BUILD_CONFIG
   ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)"
     $(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)")
     ifneq ($(DISABLE_AUTO_INSTALLCLEAN),true)
       force_installclean := true
     else
       $(info DISABLE_AUTO_INSTALLCLEAN is set; skipping auto-clean. Your tree may be in an inconsistent state.)
     endif
   endif
 endif  # else, this is the first build, so no need to clean.
 PREVIOUS_BUILD_CONFIG :=

 # Write the new state to the file.
 #
 $(shell \
   mkdir -p $(dir $(previous_build_config_file)) && \
   echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \
       $(previous_build_config_file) \
  )
 previous_build_config_file :=
 current_build_config :=

 #
 # installclean logic
 #

 # The files/dirs to delete during an installclean.  This includes the
 # non-common APPS directory, which may contain the wrong resources.
 # Use "./" in front of the paths to avoid accidentally deleting random
 # parts of the filesystem if any of the *_OUT vars resolve to blank.
 #
 # Deletes all of the files that change between different build types,
 # like "make user" vs. "make sdk".  This lets you work with different
 # build types without having to do a full clean each time.  E.g.:
 #
 #     $ make -j8 all
 #     $ make installclean
 #     $ make -j8 user
 #     $ make installclean
 #     $ make -j8 sdk
 #
 installclean_files := \
 	./$(HOST_OUT)/obj/NOTICE_FILES \
 	./$(HOST_OUT)/sdk \
 	./$(PRODUCT_OUT)/*.img \
 	./$(PRODUCT_OUT)/*.txt \
 	./$(PRODUCT_OUT)/*.xlb \
 	./$(PRODUCT_OUT)/*.zip \
 	./$(PRODUCT_OUT)/data \
 	./$(PRODUCT_OUT)/obj/lib \
 	./$(PRODUCT_OUT)/obj/APPS \
 	./$(PRODUCT_OUT)/obj/NOTICE_FILES \
 	./$(PRODUCT_OUT)/obj/PACKAGING \
 	./$(PRODUCT_OUT)/recovery \
 	./$(PRODUCT_OUT)/root \
 	./$(PRODUCT_OUT)/symbols/system/lib \
 	./$(PRODUCT_OUT)/system

 # The files/dirs to delete during a dataclean, which removes any files
 # in the staging and emulator data partitions.
 dataclean_files := \
 	./$(PRODUCT_OUT)/data/* \
 	./$(PRODUCT_OUT)/data-qemu/* \
 	./$(PRODUCT_OUT)/userdata-qemu.img

 # Define the rules for commandline invocation.
 .PHONY: dataclean
 dataclean: FILES := $(dataclean_files)
 dataclean:
 	$(hide) rm -rf $(FILES)
 	@echo "Deleted emulator userdata images."

 .PHONY: installclean
 installclean: FILES := $(installclean_files)
 installclean: dataclean
 	$(hide) rm -rf $(FILES)
 	@echo "Deleted images and staging directories."

 ifeq "$(force_installclean)" "true"
   $(info *** Forcing "make installclean"...)
   $(shell rm -rf $(dataclean_files) $(installclean_files))
   $(info *** Done with the cleaning, now starting the real build.)
 endif
 force_installclean :=
	# Copyright (C) 2007 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	INTERNAL_CLEAN_STEPS :=

	# Builds up a list of clean steps. Creates a unique
	# id for each step by taking INTERNAL_CLEAN_BUILD_VERSION
	# and appending an increasing number of '@' characters.
	#
	# $(1): shell command to run
	define _add-clean-step
	$(if $(strip $(INTERNAL_CLEAN_BUILD_VERSION)),, \
	$(error INTERNAL_CLEAN_BUILD_VERSION not set))
	$(eval _acs_id := $(strip $(lastword $(INTERNAL_CLEAN_STEPS))))
	$(if $(_acs_id),,$(eval _acs_id := $(INTERNAL_CLEAN_BUILD_VERSION)))
	$(eval _acs_id := $(_acs_id)@)
	$(eval INTERNAL_CLEAN_STEPS += $(_acs_id))
	$(eval INTERNAL_CLEAN_STEP.$(_acs_id) := $(1))
	$(eval _acs_id :=)
	endef
	define add-clean-step
	$(if $(call _add-clean-step,$(1)),)
	endef

	# Defines INTERNAL_CLEAN_BUILD_VERSION and the individual clean steps.
	# cleanspec.mk is outside of the core directory so that more people
	# can have permission to touch it.
	include build/cleanspec.mk
	INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION))

	# If the clean_steps.mk file is missing (usually after a clean build)
	# then we won't do anything.
	CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)
	CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)

	# Read the current state from the file, if present.
	# Will set CURRENT_CLEAN_BUILD_VERSION and CURRENT_CLEAN_STEPS.
	#
	clean_steps_file := $(PRODUCT_OUT)/clean_steps.mk
	-include $(clean_steps_file)

	ifneq ($(CURRENT_CLEAN_BUILD_VERSION),$(INTERNAL_CLEAN_BUILD_VERSION))
	# The major clean version is out-of-date. Do a full clean, and
	# don't even bother with the clean steps.
	$(info *** A clean build is required because of a recent change.)
	$(shell rm -rf $(OUT_DIR))
	$(info *** Done with the cleaning, now starting the real build.)
	else
	# The major clean version is correct. Find the list of clean steps
	# that we need to execute to get up-to-date.
	steps := \
	$(filter-out $(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_STEPS))
	$(foreach step,$(steps), \
	$(info Clean step: $(INTERNAL_CLEAN_STEP.$(step))) \
	$(shell $(INTERNAL_CLEAN_STEP.$(step))) \
	)
	steps :=
	endif
	CURRENT_CLEAN_BUILD_VERSION :=
	CURRENT_CLEAN_STEPS :=

	# Write the new state to the file.
	#
	$(shell \
	mkdir -p $(dir $(clean_steps_file)) && \
	echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \
	$(clean_steps_file) ;\
	echo "CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)" >> \
	$(clean_steps_file) \
	)

	clean_steps_file :=
	INTERNAL_CLEAN_STEPS :=
	INTERNAL_CLEAN_BUILD_VERSION :=


	# Since products and build variants (unfortunately) share the same
	# PRODUCT_OUT staging directory, things can get out of sync if different
	# build configurations are built in the same tree. The following logic
	# will notice when the configuration has changed and remove the files
	# necessary to keep things consistent.

	previous_build_config_file := $(PRODUCT_OUT)/previous_build_config.mk

	# TODO: this special case for the sdk is only necessary while "sdk"
	# is a valid make target. Eventually, it will just be a product, at
	# which point TARGET_PRODUCT will handle it and we can avoid this check
	# of MAKECMDGOALS. The "addprefix" is just to keep things pretty.
	ifneq ($(TARGET_PRODUCT),sdk)
	building_sdk := $(addprefix -,$(filter sdk,$(MAKECMDGOALS)))
	else
	# Don't bother with this extra part when explicitly building the sdk product.
	building_sdk :=
	endif

	# A change in the list of locales warrants an installclean, too.
	locale_list := $(subst $(space),$(comma),$(strip $(PRODUCT_LOCALES)))

	current_build_config := \
	$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)$(building_sdk)-{$(locale_list)}
	building_sdk :=
	locale_list :=
	force_installclean := false

	# Read the current state from the file, if present.
	# Will set PREVIOUS_BUILD_CONFIG.
	#
	PREVIOUS_BUILD_CONFIG :=
	-include $(previous_build_config_file)
	PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG))
	ifdef PREVIOUS_BUILD_CONFIG
	ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)"
	$(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)")
	ifneq ($(DISABLE_AUTO_INSTALLCLEAN),true)
	force_installclean := true
	else
	$(info DISABLE_AUTO_INSTALLCLEAN is set; skipping auto-clean. Your tree may be in an inconsistent state.)
	endif
	endif
	endif # else, this is the first build, so no need to clean.
	PREVIOUS_BUILD_CONFIG :=

	# Write the new state to the file.
	#
	$(shell \
	mkdir -p $(dir $(previous_build_config_file)) && \
	echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \
	$(previous_build_config_file) \
	)
	previous_build_config_file :=
	current_build_config :=

	#
	# installclean logic
	#

	# The files/dirs to delete during an installclean. This includes the
	# non-common APPS directory, which may contain the wrong resources.
	# Use "./" in front of the paths to avoid accidentally deleting random
	# parts of the filesystem if any of the *_OUT vars resolve to blank.
	#
	# Deletes all of the files that change between different build types,
	# like "make user" vs. "make sdk". This lets you work with different
	# build types without having to do a full clean each time. E.g.:
	#
	# $ make -j8 all
	# $ make installclean
	# $ make -j8 user
	# $ make installclean
	# $ make -j8 sdk
	#
	installclean_files := \
	./$(HOST_OUT)/obj/NOTICE_FILES \
	./$(HOST_OUT)/sdk \
	./$(PRODUCT_OUT)/*.img \
	./$(PRODUCT_OUT)/*.txt \
	./$(PRODUCT_OUT)/*.xlb \
	./$(PRODUCT_OUT)/*.zip \
	./$(PRODUCT_OUT)/data \
	./$(PRODUCT_OUT)/obj/lib \
	./$(PRODUCT_OUT)/obj/APPS \
	./$(PRODUCT_OUT)/obj/NOTICE_FILES \
	./$(PRODUCT_OUT)/obj/PACKAGING \
	./$(PRODUCT_OUT)/recovery \
	./$(PRODUCT_OUT)/root \
	./$(PRODUCT_OUT)/symbols/system/lib \
	./$(PRODUCT_OUT)/system

	# The files/dirs to delete during a dataclean, which removes any files
	# in the staging and emulator data partitions.
	dataclean_files := \
	./$(PRODUCT_OUT)/data/* \
	./$(PRODUCT_OUT)/data-qemu/* \
	./$(PRODUCT_OUT)/userdata-qemu.img

	# Define the rules for commandline invocation.
	.PHONY: dataclean
	dataclean: FILES := $(dataclean_files)
	dataclean:
	$(hide) rm -rf $(FILES)
	@echo "Deleted emulator userdata images."

	.PHONY: installclean
	installclean: FILES := $(installclean_files)
	installclean: dataclean
	$(hide) rm -rf $(FILES)
	@echo "Deleted images and staging directories."

	ifeq "$(force_installclean)" "true"
	$(info *** Forcing "make installclean"...)
	$(shell rm -rf $(dataclean_files) $(installclean_files))
	$(info *** Done with the cleaning, now starting the real build.)
	endif
	force_installclean :=