| # Copyright (C) 2008 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| LOCAL_PATH := $(call my-dir) |
| |
| include $(CLEAR_VARS) |
| |
| LOCAL_SRC_FILES := fs_config.c |
| LOCAL_MODULE := fs_config |
| LOCAL_SHARED_LIBRARIES := libcutils libselinux |
| LOCAL_CFLAGS := -Werror |
| |
| include $(BUILD_HOST_EXECUTABLE) |
| |
| # One can override the default android_filesystem_config.h file in one of two ways: |
| # |
| # 1. The old way: |
| # To Build the custom target binary for the host to generate the fs_config |
| # override files. The executable is hard coded to include the |
| # $(TARGET_ANDROID_FILESYSTEM_CONFIG_H) file if it exists. |
| # Expectations: |
| # device/<vendor>/<device>/android_filesystem_config.h |
| # fills in struct fs_path_config android_device_dirs[] and |
| # struct fs_path_config android_device_files[] |
| # device/<vendor>/<device>/device.mk |
| # PRODUCT_PACKAGES += fs_config_dirs fs_config_files |
| # If not specified, check if default one to be found |
| # |
| # 2. The new way: |
| # set TARGET_FS_CONFIG_GEN to contain a list of intermediate format files |
| # for generating the android_filesystem_config.h file. |
| # |
| # More information can be found in the README |
| ANDROID_FS_CONFIG_H := android_filesystem_config.h |
| |
| ifneq ($(TARGET_ANDROID_FILESYSTEM_CONFIG_H),) |
| ifneq ($(TARGET_FS_CONFIG_GEN),) |
| $(error Cannot set TARGET_ANDROID_FILESYSTEM_CONFIG_H and TARGET_FS_CONFIG_GEN simultaneously) |
| endif |
| |
| # One and only one file can be specified. |
| ifneq ($(words $(TARGET_ANDROID_FILESYSTEM_CONFIG_H)),1) |
| $(error Multiple fs_config files specified, \ |
| see "$(TARGET_ANDROID_FILESYSTEM_CONFIG_H)".) |
| endif |
| |
| ifeq ($(filter %/$(ANDROID_FS_CONFIG_H),$(TARGET_ANDROID_FILESYSTEM_CONFIG_H)),) |
| $(error TARGET_ANDROID_FILESYSTEM_CONFIG_H file name must be $(ANDROID_FS_CONFIG_H), \ |
| see "$(notdir $(TARGET_ANDROID_FILESYSTEM_CONFIG_H))".) |
| endif |
| |
| my_fs_config_h := $(TARGET_ANDROID_FILESYSTEM_CONFIG_H) |
| else ifneq ($(wildcard $(TARGET_DEVICE_DIR)/$(ANDROID_FS_CONFIG_H)),) |
| |
| ifneq ($(TARGET_FS_CONFIG_GEN),) |
| $(error Cannot provide $(TARGET_DEVICE_DIR)/$(ANDROID_FS_CONFIG_H) and set TARGET_FS_CONFIG_GEN simultaneously) |
| endif |
| my_fs_config_h := $(TARGET_DEVICE_DIR)/$(ANDROID_FS_CONFIG_H) |
| |
| else |
| my_fs_config_h := $(LOCAL_PATH)/default/$(ANDROID_FS_CONFIG_H) |
| endif |
| |
| ################################## |
| include $(CLEAR_VARS) |
| LOCAL_SRC_FILES := fs_config_generate.c |
| LOCAL_MODULE := fs_config_generate_$(TARGET_DEVICE) |
| LOCAL_MODULE_CLASS := EXECUTABLES |
| LOCAL_SHARED_LIBRARIES := libcutils |
| LOCAL_CFLAGS := -Werror -Wno-error=\#warnings |
| |
| ifneq ($(TARGET_FS_CONFIG_GEN),) |
| system_android_filesystem_config := system/core/include/private/android_filesystem_config.h |
| |
| # Generate the "generated_oem_aid.h" file |
| oem := $(local-generated-sources-dir)/generated_oem_aid.h |
| $(oem): PRIVATE_LOCAL_PATH := $(LOCAL_PATH) |
| $(oem): PRIVATE_TARGET_FS_CONFIG_GEN := $(TARGET_FS_CONFIG_GEN) |
| $(oem): PRIVATE_ANDROID_FS_HDR := $(system_android_filesystem_config) |
| $(oem): PRIVATE_CUSTOM_TOOL = $(PRIVATE_LOCAL_PATH)/fs_config_generator.py oemaid --aid-header=$(PRIVATE_ANDROID_FS_HDR) $(PRIVATE_TARGET_FS_CONFIG_GEN) > $@ |
| $(oem): $(TARGET_FS_CONFIG_GEN) $(LOCAL_PATH)/fs_config_generator.py |
| $(transform-generated-source) |
| |
| # Generate the fs_config header |
| gen := $(local-generated-sources-dir)/$(ANDROID_FS_CONFIG_H) |
| $(gen): PRIVATE_LOCAL_PATH := $(LOCAL_PATH) |
| $(gen): PRIVATE_TARGET_FS_CONFIG_GEN := $(TARGET_FS_CONFIG_GEN) |
| $(gen): PRIVATE_ANDROID_FS_HDR := $(system_android_filesystem_config) |
| $(gen): PRIVATE_CUSTOM_TOOL = $(PRIVATE_LOCAL_PATH)/fs_config_generator.py fsconfig --aid-header=$(PRIVATE_ANDROID_FS_HDR) $(PRIVATE_TARGET_FS_CONFIG_GEN) > $@ |
| $(gen): $(TARGET_FS_CONFIG_GEN) $(system_android_filesystem_config) $(LOCAL_PATH)/fs_config_generator.py |
| $(transform-generated-source) |
| |
| LOCAL_GENERATED_SOURCES := $(oem) $(gen) |
| |
| my_fs_config_h := $(gen) |
| my_gen_oem_aid := $(oem) |
| gen := |
| oem := |
| endif |
| |
| LOCAL_C_INCLUDES := $(dir $(my_fs_config_h)) $(dir $(my_gen_oem_aid)) |
| |
| include $(BUILD_HOST_EXECUTABLE) |
| fs_config_generate_bin := $(LOCAL_INSTALLED_MODULE) |
| # List of all supported vendor, oem and odm Partitions |
| fs_config_generate_extra_partition_list := $(strip \ |
| $(if $(BOARD_USES_VENDORIMAGE)$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),vendor) \ |
| $(if $(BOARD_USES_OEMIMAGE)$(BOARD_OEMIMAGE_FILE_SYSTEM_TYPE),oem) \ |
| $(if $(BOARD_USES_ODMIMAGE)$(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE),odm)) |
| |
| ################################## |
| # Generate the system/etc/fs_config_dirs binary file for the target |
| # Add fs_config_dirs to PRODUCT_PACKAGES in the device make file to enable |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_dirs |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_REQUIRED_MODULES := $(foreach t,$(fs_config_generate_extra_partition_list),$(LOCAL_MODULE)_$(t)) |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -D $(if $(fs_config_generate_extra_partition_list), \ |
| -P '$(subst $(space),$(comma),$(addprefix -,$(fs_config_generate_extra_partition_list)))') \ |
| -o $@ |
| |
| ################################## |
| # Generate the system/etc/fs_config_files binary file for the target |
| # Add fs_config_files to PRODUCT_PACKAGES in the device make file to enable |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_files |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_REQUIRED_MODULES := $(foreach t,$(fs_config_generate_extra_partition_list),$(LOCAL_MODULE)_$(t)) |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -F $(if $(fs_config_generate_extra_partition_list), \ |
| -P '$(subst $(space),$(comma),$(addprefix -,$(fs_config_generate_extra_partition_list)))') \ |
| -o $@ |
| |
| ifneq ($(filter vendor,$(fs_config_generate_extra_partition_list)),) |
| ################################## |
| # Generate the vendor/etc/fs_config_dirs binary file for the target |
| # Add fs_config_dirs or fs_config_dirs_vendor to PRODUCT_PACKAGES in |
| # the device make file to enable. |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_dirs_vendor |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_INSTALLED_MODULE_STEM := fs_config_dirs |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -D -P vendor -o $@ |
| |
| ################################## |
| # Generate the vendor/etc/fs_config_files binary file for the target |
| # Add fs_config_files or fs_config_files_vendor to PRODUCT_PACKAGES in |
| # the device make file to enable |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_files_vendor |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_INSTALLED_MODULE_STEM := fs_config_files |
| LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -F -P vendor -o $@ |
| |
| endif |
| |
| ifneq ($(filter oem,$(fs_config_generate_extra_partition_list)),) |
| ################################## |
| # Generate the oem/etc/fs_config_dirs binary file for the target |
| # Add fs_config_dirs or fs_config_dirs_oem to PRODUCT_PACKAGES in |
| # the device make file to enable |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_dirs_oem |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_INSTALLED_MODULE_STEM := fs_config_dirs |
| LOCAL_MODULE_PATH := $(TARGET_OUT_OEM)/etc |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -D -P oem -o $@ |
| |
| ################################## |
| # Generate the oem/etc/fs_config_files binary file for the target |
| # Add fs_config_files or fs_config_files_oem to PRODUCT_PACKAGES in |
| # the device make file to enable |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_files_oem |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_INSTALLED_MODULE_STEM := fs_config_files |
| LOCAL_MODULE_PATH := $(TARGET_OUT_OEM)/etc |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -F -P oem -o $@ |
| |
| endif |
| |
| ifneq ($(filter odm,$(fs_config_generate_extra_partition_list)),) |
| ################################## |
| # Generate the odm/etc/fs_config_dirs binary file for the target |
| # Add fs_config_dirs or fs_config_dirs_odm to PRODUCT_PACKAGES in |
| # the device make file to enable |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_dirs_odm |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_INSTALLED_MODULE_STEM := fs_config_dirs |
| LOCAL_MODULE_PATH := $(TARGET_OUT_ODM)/etc |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -D -P odm -o $@ |
| |
| ################################## |
| # Generate the odm/etc/fs_config_files binary file for the target |
| # Add fs_config_files of fs_config_files_odm to PRODUCT_PACKAGES in |
| # the device make file to enable |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := fs_config_files_odm |
| LOCAL_MODULE_CLASS := ETC |
| LOCAL_INSTALLED_MODULE_STEM := fs_config_files |
| LOCAL_MODULE_PATH := $(TARGET_OUT_ODM)/etc |
| include $(BUILD_SYSTEM)/base_rules.mk |
| $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin) |
| @mkdir -p $(dir $@) |
| $< -F -P odm -o $@ |
| |
| endif |
| |
| # The newer passwd/group targets are only generated if you |
| # use the new TARGET_FS_CONFIG_GEN method. |
| ifneq ($(TARGET_FS_CONFIG_GEN),) |
| |
| ################################## |
| # Build the oemaid library when fs config files are present. |
| # Intentionally break build if you require generated AIDS |
| # header file, but are not using any fs config files. |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := liboemaids |
| LOCAL_EXPORT_C_INCLUDE_DIRS := $(dir $(my_gen_oem_aid)) |
| LOCAL_EXPORT_C_INCLUDE_DEPS := $(my_gen_oem_aid) |
| include $(BUILD_STATIC_LIBRARY) |
| |
| ################################## |
| # Generate the system/etc/passwd text file for the target |
| # This file may be empty if no AIDs are defined in |
| # TARGET_FS_CONFIG_GEN files. |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := passwd |
| LOCAL_MODULE_CLASS := ETC |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_LOCAL_PATH := $(LOCAL_PATH) |
| $(LOCAL_BUILT_MODULE): PRIVATE_TARGET_FS_CONFIG_GEN := $(TARGET_FS_CONFIG_GEN) |
| $(LOCAL_BUILT_MODULE): PRIVATE_ANDROID_FS_HDR := $(system_android_filesystem_config) |
| $(LOCAL_BUILT_MODULE): $(LOCAL_PATH)/fs_config_generator.py $(TARGET_FS_CONFIG_GEN) $(system_android_filesystem_config) |
| @mkdir -p $(dir $@) |
| $(hide) $< passwd --aid-header=$(PRIVATE_ANDROID_FS_HDR) $(PRIVATE_TARGET_FS_CONFIG_GEN) > $@ |
| |
| ################################## |
| # Generate the system/etc/group text file for the target |
| # This file may be empty if no AIDs are defined in |
| # TARGET_FS_CONFIG_GEN files. |
| include $(CLEAR_VARS) |
| |
| LOCAL_MODULE := group |
| LOCAL_MODULE_CLASS := ETC |
| |
| include $(BUILD_SYSTEM)/base_rules.mk |
| |
| $(LOCAL_BUILT_MODULE): PRIVATE_LOCAL_PATH := $(LOCAL_PATH) |
| $(LOCAL_BUILT_MODULE): PRIVATE_TARGET_FS_CONFIG_GEN := $(TARGET_FS_CONFIG_GEN) |
| $(LOCAL_BUILT_MODULE): PRIVATE_ANDROID_FS_HDR := $(system_android_filesystem_config) |
| $(LOCAL_BUILT_MODULE): $(LOCAL_PATH)/fs_config_generator.py $(TARGET_FS_CONFIG_GEN) $(system_android_filesystem_config) |
| @mkdir -p $(dir $@) |
| $(hide) $< group --aid-header=$(PRIVATE_ANDROID_FS_HDR) $(PRIVATE_TARGET_FS_CONFIG_GEN) > $@ |
| |
| system_android_filesystem_config := |
| endif |
| |
| ANDROID_FS_CONFIG_H := |
| my_fs_config_h := |
| fs_config_generate_bin := |
| my_gen_oem_aid := |
| fs_config_generate_extra_partition_list := |
| |
| # ----------------------------------------------------------------------------- |
| # Unit tests. |
| # ----------------------------------------------------------------------------- |
| |
| test_c_flags := \ |
| -fstack-protector-all \ |
| -g \ |
| -Wall \ |
| -Wextra \ |
| -Werror \ |
| -fno-builtin \ |
| -DANDROID_FILESYSTEM_CONFIG='"android_filesystem_config_test_data.h"' |
| |
| ################################## |
| # test executable |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := fs_config_generate_test |
| LOCAL_SRC_FILES := fs_config_generate.c |
| LOCAL_SHARED_LIBRARIES := libcutils |
| LOCAL_CFLAGS := $(test_c_flags) |
| LOCAL_MODULE_RELATIVE_PATH := fs_config-unit-tests |
| LOCAL_GTEST := false |
| include $(BUILD_HOST_NATIVE_TEST) |
| |
| ################################## |
| # gTest tool |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := fs_config-unit-tests |
| LOCAL_CFLAGS += $(test_c_flags) -DHOST |
| LOCAL_SHARED_LIBRARIES := liblog libcutils libbase |
| LOCAL_SRC_FILES := fs_config_test.cpp |
| include $(BUILD_HOST_NATIVE_TEST) |