| # |
| # Copyright (C) 2008 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # Handle various build version information. |
| # |
| # Guarantees that the following are defined: |
| # PLATFORM_VERSION |
| # PLATFORM_SDK_VERSION |
| # PLATFORM_VERSION_CODENAME |
| # DEFAULT_APP_TARGET_SDK |
| # BUILD_ID |
| # BUILD_NUMBER |
| # BUILD_DATETIME |
| # PLATFORM_SECURITY_PATCH |
| # |
| |
| # Look for an optional file containing overrides of the defaults, |
| # but don't cry if we don't find it. We could just use -include, but |
| # the build.prop target also wants INTERNAL_BUILD_ID_MAKEFILE to be set |
| # if the file exists. |
| # |
| INTERNAL_BUILD_ID_MAKEFILE := $(wildcard $(BUILD_SYSTEM)/build_id.mk) |
| ifdef INTERNAL_BUILD_ID_MAKEFILE |
| include $(INTERNAL_BUILD_ID_MAKEFILE) |
| endif |
| |
| DEFAULT_PLATFORM_VERSION := OPD1 |
| MIN_PLATFORM_VERSION := OPD1 |
| MAX_PLATFORM_VERSION := PPR1 |
| |
| ALLOWED_VERSIONS := $(call allowed-platform-versions,\ |
| $(MIN_PLATFORM_VERSION),\ |
| $(MAX_PLATFORM_VERSION),\ |
| $(DEFAULT_PLATFORM_VERSION)) |
| |
| ifndef TARGET_PLATFORM_VERSION |
| TARGET_PLATFORM_VERSION := $(DEFAULT_PLATFORM_VERSION) |
| else ifeq ($(TARGET_PLATFORM_VERSION),OPR1) |
| # HACK: lunch currently sets TARGET_PLATFORM_VERSION to |
| # DEFAULT_PLATFORM_VERSION, which causes unnecessary pain |
| # when the old DEFAULT_PLATFORM_VERSION becomes invalid. |
| # For now, silently upgrade OPR1 to the current default. |
| TARGET_PLATFORM_VERSION := $(DEFAULT_PLATFORM_VERSION) |
| endif |
| |
| ifeq (,$(filter $(ALLOWED_VERSIONS), $(TARGET_PLATFORM_VERSION))) |
| $(warning Invalid TARGET_PLATFORM_VERSION '$(TARGET_PLATFORM_VERSION)', must be one of) |
| $(error $(ALLOWED_VERSIONS)) |
| endif |
| |
| # Default versions for each TARGET_PLATFORM_VERSION |
| # TODO: PLATFORM_VERSION, PLATFORM_SDK_VERSION, etc. should be conditional |
| # on this |
| |
| # This is the canonical definition of the platform version, |
| # which is the version that we reveal to the end user. |
| # Update this value when the platform version changes (rather |
| # than overriding it somewhere else). Can be an arbitrary string. |
| |
| # When you add a new PLATFORM_VERSION which will result in a new |
| # PLATFORM_SDK_VERSION please ensure you add a corresponding isAtLeast* |
| # method in the following java file: |
| # frameworks/support/compat/gingerbread/android/support/v4/os/BuildCompat.java |
| |
| # When you change PLATFORM_VERSION for a given PLATFORM_SDK_VERSION |
| # please add that PLATFORM_VERSION to the following text file: |
| # cts/tests/tests/os/assets/platform_versions.txt |
| PLATFORM_VERSION.OPD1 := 8.0.1 |
| PLATFORM_VERSION.OPM1 := OMR1 |
| PLATFORM_VERSION.PPR1 := P |
| |
| # These are the current development codenames, if the build is not a final |
| # release build. If this is a final release build, it is simply "REL". |
| PLATFORM_VERSION_CODENAME.OPD1 := REL |
| PLATFORM_VERSION_CODENAME.OPM1 := OMR1 |
| PLATFORM_VERSION_CODENAME.PPR1 := P |
| |
| ifndef PLATFORM_VERSION |
| PLATFORM_VERSION := $(PLATFORM_VERSION.$(TARGET_PLATFORM_VERSION)) |
| ifndef PLATFORM_VERSION |
| # PLATFORM_VERSION falls back to TARGET_PLATFORM_VERSION |
| PLATFORM_VERSION := $(TARGET_PLATFORM_VERSION) |
| endif |
| endif |
| |
| ifndef PLATFORM_SDK_VERSION |
| # This is the canonical definition of the SDK version, which defines |
| # the set of APIs and functionality available in the platform. It |
| # is a single integer that increases monotonically as updates to |
| # the SDK are released. It should only be incremented when the APIs for |
| # the new release are frozen (so that developers don't write apps against |
| # intermediate builds). During development, this number remains at the |
| # SDK version the branch is based on and PLATFORM_VERSION_CODENAME holds |
| # the code-name of the new development work. |
| |
| # When you change PLATFORM_SDK_VERSION please ensure you also update the |
| # corresponding methods for isAtLeast* in the following java file: |
| # frameworks/support/compat/gingerbread/android/support/v4/os/BuildCompat.java |
| |
| # When you increment the PLATFORM_SDK_VERSION please ensure you also |
| # clear out the following text file of all older PLATFORM_VERSION's: |
| # cts/tests/tests/os/assets/platform_versions.txt |
| PLATFORM_SDK_VERSION := 26 |
| endif |
| |
| ifndef PLATFORM_JACK_MIN_SDK_VERSION |
| # This is definition of the min SDK version given to Jack for the current |
| # platform. For released version it should be the same as |
| # PLATFORM_SDK_VERSION. During development, this number may be incremented |
| # before PLATFORM_SDK_VERSION if the platform starts to add new java |
| # language supports. |
| PLATFORM_JACK_MIN_SDK_VERSION := o-b1 |
| endif |
| |
| ifndef PLATFORM_VERSION_CODENAME |
| PLATFORM_VERSION_CODENAME := $(PLATFORM_VERSION_CODENAME.$(TARGET_PLATFORM_VERSION)) |
| ifndef PLATFORM_VERSION_CODENAME |
| # PLATFORM_VERSION_CODENAME falls back to TARGET_PLATFORM_VERSION |
| PLATFORM_VERSION_CODENAME := $(TARGET_PLATFORM_VERSION) |
| endif |
| |
| # This is all of the *active* development codenames. There are future |
| # codenames not included in this list. This confusing name is needed because |
| # all_codenames has been baked into build.prop for ages. |
| # |
| # Should be either the same as PLATFORM_VERSION_CODENAME or a comma-separated |
| # list of additional codenames after PLATFORM_VERSION_CODENAME. |
| PLATFORM_VERSION_ALL_CODENAMES := |
| |
| # Build a list of all active code names. Avoid duplicates, and stop when we |
| # reach a codename that matches PLATFORM_VERSION_CODENAME (anything beyond |
| # that is not included in our build). |
| _versions_in_target := \ |
| $(call find_and_earlier,$(ALL_VERSIONS),$(TARGET_PLATFORM_VERSION)) |
| $(foreach version,$(_versions_in_target),\ |
| $(eval _codename := $(PLATFORM_VERSION_CODENAME.$(version)))\ |
| $(if $(filter $(_codename),$(PLATFORM_VERSION_ALL_CODENAMES)),,\ |
| $(eval PLATFORM_VERSION_ALL_CODENAMES += $(_codename)))) |
| |
| # This is all of the inactive development codenames. Available to be targeted |
| # in this branch but in the future relative to our current target. |
| PLATFORM_VERSION_FUTURE_CODENAMES := |
| |
| # Build a list of all untargeted code names. Avoid duplicates. |
| _versions_not_in_target := \ |
| $(filter-out $(PLATFORM_VERSION_ALL_CODENAMES),$(ALL_VERSIONS)) |
| $(foreach version,$(_versions_not_in_target),\ |
| $(eval _codename := $(PLATFORM_VERSION_CODENAME.$(version)))\ |
| $(if $(filter $(_codename),$(PLATFORM_VERSION_FUTURE_CODENAMES)),,\ |
| $(eval PLATFORM_VERSION_FUTURE_CODENAMES += $(_codename)))) |
| |
| # And convert from space separated to comma separated. |
| PLATFORM_VERSION_ALL_CODENAMES := \ |
| $(subst $(space),$(comma),$(strip $(PLATFORM_VERSION_ALL_CODENAMES))) |
| PLATFORM_VERSION_FUTURE_CODENAMES := \ |
| $(subst $(space),$(comma),$(strip $(PLATFORM_VERSION_FUTURE_CODENAMES))) |
| |
| endif |
| |
| ifeq (REL,$(PLATFORM_VERSION_CODENAME)) |
| PLATFORM_PREVIEW_SDK_VERSION := 0 |
| else |
| ifndef PLATFORM_PREVIEW_SDK_VERSION |
| # This is the definition of a preview SDK version over and above the current |
| # platform SDK version. Unlike the platform SDK version, a higher value |
| # for preview SDK version does NOT mean that all prior preview APIs are |
| # included. Packages reading this value to determine compatibility with |
| # known APIs should check that this value is precisely equal to the preview |
| # SDK version the package was built for, otherwise it should fall back to |
| # assuming the device can only support APIs as of the previous official |
| # public release. |
| # This value will always be 0 for release builds. |
| PLATFORM_PREVIEW_SDK_VERSION := 1 |
| endif |
| endif |
| |
| ifndef DEFAULT_APP_TARGET_SDK |
| # This is the default minSdkVersion and targetSdkVersion to use for |
| # all .apks created by the build system. It can be overridden by explicitly |
| # setting these in the .apk's AndroidManifest.xml. It is either the code |
| # name of the development build or, if this is a release build, the official |
| # SDK version of this release. |
| ifeq (REL,$(PLATFORM_VERSION_CODENAME)) |
| DEFAULT_APP_TARGET_SDK := $(PLATFORM_SDK_VERSION) |
| else |
| DEFAULT_APP_TARGET_SDK := $(PLATFORM_VERSION_CODENAME) |
| endif |
| endif |
| |
| ifndef PLATFORM_SECURITY_PATCH |
| # Used to indicate the security patch that has been applied to the device. |
| # It must signify that the build includes all security patches issued up through the designated Android Public Security Bulletin. |
| # It must be of the form "YYYY-MM-DD" on production devices. |
| # It must match one of the Android Security Patch Level strings of the Public Security Bulletins. |
| # If there is no $PLATFORM_SECURITY_PATCH set, keep it empty. |
| PLATFORM_SECURITY_PATCH := 2017-10-05 |
| endif |
| |
| ifndef PLATFORM_BASE_OS |
| # Used to indicate the base os applied to the device. |
| # Can be an arbitrary string, but must be a single word. |
| # |
| # If there is no $PLATFORM_BASE_OS set, keep it empty. |
| PLATFORM_BASE_OS := |
| endif |
| |
| ifndef BUILD_ID |
| # Used to signify special builds. E.g., branches and/or releases, |
| # like "M5-RC7". Can be an arbitrary string, but must be a single |
| # word and a valid file name. |
| # |
| # If there is no BUILD_ID set, make it obvious. |
| BUILD_ID := UNKNOWN |
| endif |
| |
| ifndef BUILD_DATETIME |
| # Used to reproduce builds by setting the same time. Must be the number |
| # of seconds since the Epoch. |
| BUILD_DATETIME := $(shell date +%s) |
| endif |
| |
| ifneq (,$(findstring Darwin,$(UNAME))) |
| DATE := date -r $(BUILD_DATETIME) |
| else |
| DATE := date -d @$(BUILD_DATETIME) |
| endif |
| |
| ifndef BUILD_NUMBER |
| # BUILD_NUMBER should be set to the source control value that |
| # represents the current state of the source code. E.g., a |
| # perforce changelist number or a git hash. Can be an arbitrary string |
| # (to allow for source control that uses something other than numbers), |
| # but must be a single word and a valid file name. |
| # |
| # If no BUILD_NUMBER is set, create a useful "I am an engineering build |
| # from this date/time" value. Make it start with a non-digit so that |
| # anyone trying to parse it as an integer will probably get "0". |
| BUILD_NUMBER := eng.$(shell echo $${USER:0:6}).$(shell $(DATE) +%Y%m%d.%H%M%S) |
| endif |