| #!/usr/bin/env python |
| # |
| # Copyright (C) 2008 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| """ |
| Given a target-files zipfile, produces an OTA package that installs |
| that build. An incremental OTA is produced if -i is given, otherwise |
| a full OTA is produced. |
| |
| Usage: ota_from_target_files [flags] input_target_files output_ota_package |
| |
| -b (--board_config) <file> |
| Deprecated. |
| |
| -k (--package_key) <key> Key to use to sign the package (default is |
| the value of default_system_dev_certificate from the input |
| target-files's META/misc_info.txt, or |
| "build/target/product/security/testkey" if that value is not |
| specified). |
| |
| For incremental OTAs, the default value is based on the source |
| target-file, not the target build. |
| |
| -i (--incremental_from) <file> |
| Generate an incremental OTA using the given target-files zip as |
| the starting build. |
| |
| -w (--wipe_user_data) |
| Generate an OTA package that will wipe the user data partition |
| when installed. |
| |
| -n (--no_prereq) |
| Omit the timestamp prereq check normally included at the top of |
| the build scripts (used for developer OTA packages which |
| legitimately need to go back and forth). |
| |
| -e (--extra_script) <file> |
| Insert the contents of file at the end of the update script. |
| |
| -a (--aslr_mode) <on|off> |
| Specify whether to turn on ASLR for the package (on by default). |
| |
| """ |
| |
| import sys |
| |
| if sys.hexversion < 0x02040000: |
| print >> sys.stderr, "Python 2.4 or newer is required." |
| sys.exit(1) |
| |
| import copy |
| import errno |
| import os |
| import re |
| import subprocess |
| import tempfile |
| import time |
| import zipfile |
| |
| try: |
| from hashlib import sha1 as sha1 |
| except ImportError: |
| from sha import sha as sha1 |
| |
| import common |
| import edify_generator |
| |
| OPTIONS = common.OPTIONS |
| OPTIONS.package_key = None |
| OPTIONS.incremental_source = None |
| OPTIONS.require_verbatim = set() |
| OPTIONS.prohibit_verbatim = set(("system/build.prop",)) |
| OPTIONS.patch_threshold = 0.95 |
| OPTIONS.wipe_user_data = False |
| OPTIONS.omit_prereq = False |
| OPTIONS.extra_script = None |
| OPTIONS.aslr_mode = True |
| OPTIONS.worker_threads = 3 |
| |
| def MostPopularKey(d, default): |
| """Given a dict, return the key corresponding to the largest |
| value. Returns 'default' if the dict is empty.""" |
| x = [(v, k) for (k, v) in d.iteritems()] |
| if not x: return default |
| x.sort() |
| return x[-1][1] |
| |
| |
| def IsSymlink(info): |
| """Return true if the zipfile.ZipInfo object passed in represents a |
| symlink.""" |
| return (info.external_attr >> 16) == 0120777 |
| |
| def IsRegular(info): |
| """Return true if the zipfile.ZipInfo object passed in represents a |
| symlink.""" |
| return (info.external_attr >> 28) == 010 |
| |
| def ClosestFileMatch(src, tgtfiles, existing): |
| """Returns the closest file match between a source file and list |
| of potential matches. The exact filename match is preferred, |
| then the sha1 is searched for, and finally a file with the same |
| basename is evaluated. Rename support in the updater-binary is |
| required for the latter checks to be used.""" |
| |
| result = tgtfiles.get("path:" + src.name) |
| if result is not None: |
| return result |
| |
| if not OPTIONS.target_info_dict.get("update_rename_support", False): |
| return None |
| |
| if src.size < 1000: |
| return None |
| |
| result = tgtfiles.get("sha1:" + src.sha1) |
| if result is not None and existing.get(result.name) is None: |
| return result |
| result = tgtfiles.get("file:" + src.name.split("/")[-1]) |
| if result is not None and existing.get(result.name) is None: |
| return result |
| return None |
| |
| class Item: |
| """Items represent the metadata (user, group, mode) of files and |
| directories in the system image.""" |
| ITEMS = {} |
| def __init__(self, name, dir=False): |
| self.name = name |
| self.uid = None |
| self.gid = None |
| self.mode = None |
| self.selabel = None |
| self.capabilities = None |
| self.dir = dir |
| |
| if name: |
| self.parent = Item.Get(os.path.dirname(name), dir=True) |
| self.parent.children.append(self) |
| else: |
| self.parent = None |
| if dir: |
| self.children = [] |
| |
| def Dump(self, indent=0): |
| if self.uid is not None: |
| print "%s%s %d %d %o" % (" "*indent, self.name, self.uid, self.gid, self.mode) |
| else: |
| print "%s%s %s %s %s" % (" "*indent, self.name, self.uid, self.gid, self.mode) |
| if self.dir: |
| print "%s%s" % (" "*indent, self.descendants) |
| print "%s%s" % (" "*indent, self.best_subtree) |
| for i in self.children: |
| i.Dump(indent=indent+1) |
| |
| @classmethod |
| def Get(cls, name, dir=False): |
| if name not in cls.ITEMS: |
| cls.ITEMS[name] = Item(name, dir=dir) |
| return cls.ITEMS[name] |
| |
| @classmethod |
| def GetMetadata(cls, input_zip): |
| |
| # The target_files contains a record of what the uid, |
| # gid, and mode are supposed to be. |
| output = input_zip.read("META/filesystem_config.txt") |
| |
| for line in output.split("\n"): |
| if not line: continue |
| columns = line.split() |
| name, uid, gid, mode = columns[:4] |
| selabel = None |
| capabilities = None |
| |
| # After the first 4 columns, there are a series of key=value |
| # pairs. Extract out the fields we care about. |
| for element in columns[4:]: |
| key, value = element.split("=") |
| if key == "selabel": |
| selabel = value |
| if key == "capabilities": |
| capabilities = value |
| |
| i = cls.ITEMS.get(name, None) |
| if i is not None: |
| i.uid = int(uid) |
| i.gid = int(gid) |
| i.mode = int(mode, 8) |
| i.selabel = selabel |
| i.capabilities = capabilities |
| if i.dir: |
| i.children.sort(key=lambda i: i.name) |
| |
| # set metadata for the files generated by this script. |
| i = cls.ITEMS.get("system/recovery-from-boot.p", None) |
| if i: i.uid, i.gid, i.mode, i.selabel, i.capabilities = 0, 0, 0644, None, None |
| i = cls.ITEMS.get("system/etc/install-recovery.sh", None) |
| if i: i.uid, i.gid, i.mode, i.selabel, i.capabilities = 0, 0, 0544, None, None |
| |
| def CountChildMetadata(self): |
| """Count up the (uid, gid, mode, selabel, capabilities) tuples for |
| all children and determine the best strategy for using set_perm_recursive and |
| set_perm to correctly chown/chmod all the files to their desired |
| values. Recursively calls itself for all descendants. |
| |
| Returns a dict of {(uid, gid, dmode, fmode, selabel, capabilities): count} counting up |
| all descendants of this node. (dmode or fmode may be None.) Also |
| sets the best_subtree of each directory Item to the (uid, gid, |
| dmode, fmode, selabel, capabilities) tuple that will match the most |
| descendants of that Item. |
| """ |
| |
| assert self.dir |
| d = self.descendants = {(self.uid, self.gid, self.mode, None, self.selabel, self.capabilities): 1} |
| for i in self.children: |
| if i.dir: |
| for k, v in i.CountChildMetadata().iteritems(): |
| d[k] = d.get(k, 0) + v |
| else: |
| k = (i.uid, i.gid, None, i.mode, i.selabel, i.capabilities) |
| d[k] = d.get(k, 0) + 1 |
| |
| # Find the (uid, gid, dmode, fmode, selabel, capabilities) |
| # tuple that matches the most descendants. |
| |
| # First, find the (uid, gid) pair that matches the most |
| # descendants. |
| ug = {} |
| for (uid, gid, _, _, _, _), count in d.iteritems(): |
| ug[(uid, gid)] = ug.get((uid, gid), 0) + count |
| ug = MostPopularKey(ug, (0, 0)) |
| |
| # Now find the dmode, fmode, selabel, and capabilities that match |
| # the most descendants with that (uid, gid), and choose those. |
| best_dmode = (0, 0755) |
| best_fmode = (0, 0644) |
| best_selabel = (0, None) |
| best_capabilities = (0, None) |
| for k, count in d.iteritems(): |
| if k[:2] != ug: continue |
| if k[2] is not None and count >= best_dmode[0]: best_dmode = (count, k[2]) |
| if k[3] is not None and count >= best_fmode[0]: best_fmode = (count, k[3]) |
| if k[4] is not None and count >= best_selabel[0]: best_selabel = (count, k[4]) |
| if k[5] is not None and count >= best_capabilities[0]: best_capabilities = (count, k[5]) |
| self.best_subtree = ug + (best_dmode[1], best_fmode[1], best_selabel[1], best_capabilities[1]) |
| |
| return d |
| |
| def SetPermissions(self, script): |
| """Append set_perm/set_perm_recursive commands to 'script' to |
| set all permissions, users, and groups for the tree of files |
| rooted at 'self'.""" |
| |
| self.CountChildMetadata() |
| |
| def recurse(item, current): |
| # current is the (uid, gid, dmode, fmode, selabel, capabilities) tuple that the current |
| # item (and all its children) have already been set to. We only |
| # need to issue set_perm/set_perm_recursive commands if we're |
| # supposed to be something different. |
| if item.dir: |
| if current != item.best_subtree: |
| script.SetPermissionsRecursive("/"+item.name, *item.best_subtree) |
| current = item.best_subtree |
| |
| if item.uid != current[0] or item.gid != current[1] or \ |
| item.mode != current[2] or item.selabel != current[4] or \ |
| item.capabilities != current[5]: |
| script.SetPermissions("/"+item.name, item.uid, item.gid, |
| item.mode, item.selabel, item.capabilities) |
| |
| for i in item.children: |
| recurse(i, current) |
| else: |
| if item.uid != current[0] or item.gid != current[1] or \ |
| item.mode != current[3] or item.selabel != current[4] or \ |
| item.capabilities != current[5]: |
| script.SetPermissions("/"+item.name, item.uid, item.gid, |
| item.mode, item.selabel, item.capabilities) |
| |
| recurse(self, (-1, -1, -1, -1, None, None)) |
| |
| |
| def CopySystemFiles(input_zip, output_zip=None, |
| substitute=None): |
| """Copies files underneath system/ in the input zip to the output |
| zip. Populates the Item class with their metadata, and returns a |
| list of symlinks. output_zip may be None, in which case the copy is |
| skipped (but the other side effects still happen). substitute is an |
| optional dict of {output filename: contents} to be output instead of |
| certain input files. |
| """ |
| |
| symlinks = [] |
| |
| for info in input_zip.infolist(): |
| if info.filename.startswith("SYSTEM/"): |
| basefilename = info.filename[7:] |
| if IsSymlink(info): |
| symlinks.append((input_zip.read(info.filename), |
| "/system/" + basefilename)) |
| else: |
| info2 = copy.copy(info) |
| fn = info2.filename = "system/" + basefilename |
| if substitute and fn in substitute and substitute[fn] is None: |
| continue |
| if output_zip is not None: |
| if substitute and fn in substitute: |
| data = substitute[fn] |
| else: |
| data = input_zip.read(info.filename) |
| output_zip.writestr(info2, data) |
| if fn.endswith("/"): |
| Item.Get(fn[:-1], dir=True) |
| else: |
| Item.Get(fn, dir=False) |
| |
| symlinks.sort() |
| return symlinks |
| |
| |
| def SignOutput(temp_zip_name, output_zip_name): |
| key_passwords = common.GetKeyPasswords([OPTIONS.package_key]) |
| pw = key_passwords[OPTIONS.package_key] |
| |
| common.SignFile(temp_zip_name, output_zip_name, OPTIONS.package_key, pw, |
| whole_file=True) |
| |
| |
| def AppendAssertions(script, info_dict): |
| device = GetBuildProp("ro.product.device", info_dict) |
| script.AssertDevice(device) |
| |
| |
| def MakeRecoveryPatch(input_tmp, output_zip, recovery_img, boot_img): |
| """Generate a binary patch that creates the recovery image starting |
| with the boot image. (Most of the space in these images is just the |
| kernel, which is identical for the two, so the resulting patch |
| should be efficient.) Add it to the output zip, along with a shell |
| script that is run from init.rc on first boot to actually do the |
| patching and install the new recovery image. |
| |
| recovery_img and boot_img should be File objects for the |
| corresponding images. info should be the dictionary returned by |
| common.LoadInfoDict() on the input target_files. |
| |
| Returns an Item for the shell script, which must be made |
| executable. |
| """ |
| |
| diff_program = ["imgdiff"] |
| path = os.path.join(input_tmp, "SYSTEM", "etc", "recovery-resource.dat") |
| if os.path.exists(path): |
| diff_program.append("-b") |
| diff_program.append(path) |
| bonus_args = "-b /system/etc/recovery-resource.dat" |
| else: |
| bonus_args = "" |
| |
| d = common.Difference(recovery_img, boot_img, diff_program=diff_program) |
| _, _, patch = d.ComputePatch() |
| common.ZipWriteStr(output_zip, "recovery/recovery-from-boot.p", patch) |
| Item.Get("system/recovery-from-boot.p", dir=False) |
| |
| boot_type, boot_device = common.GetTypeAndDevice("/boot", OPTIONS.info_dict) |
| recovery_type, recovery_device = common.GetTypeAndDevice("/recovery", OPTIONS.info_dict) |
| |
| sh = """#!/system/bin/sh |
| if ! applypatch -c %(recovery_type)s:%(recovery_device)s:%(recovery_size)d:%(recovery_sha1)s; then |
| log -t recovery "Installing new recovery image" |
| applypatch %(bonus_args)s %(boot_type)s:%(boot_device)s:%(boot_size)d:%(boot_sha1)s %(recovery_type)s:%(recovery_device)s %(recovery_sha1)s %(recovery_size)d %(boot_sha1)s:/system/recovery-from-boot.p |
| else |
| log -t recovery "Recovery image already installed" |
| fi |
| """ % { 'boot_size': boot_img.size, |
| 'boot_sha1': boot_img.sha1, |
| 'recovery_size': recovery_img.size, |
| 'recovery_sha1': recovery_img.sha1, |
| 'boot_type': boot_type, |
| 'boot_device': boot_device, |
| 'recovery_type': recovery_type, |
| 'recovery_device': recovery_device, |
| 'bonus_args': bonus_args, |
| } |
| common.ZipWriteStr(output_zip, "recovery/etc/install-recovery.sh", sh) |
| return Item.Get("system/etc/install-recovery.sh", dir=False) |
| |
| |
| def WriteFullOTAPackage(input_zip, output_zip): |
| # TODO: how to determine this? We don't know what version it will |
| # be installed on top of. For now, we expect the API just won't |
| # change very often. |
| script = edify_generator.EdifyGenerator(3, OPTIONS.info_dict) |
| |
| metadata = {"post-build": GetBuildProp("ro.build.fingerprint", |
| OPTIONS.info_dict), |
| "pre-device": GetBuildProp("ro.product.device", |
| OPTIONS.info_dict), |
| "post-timestamp": GetBuildProp("ro.build.date.utc", |
| OPTIONS.info_dict), |
| } |
| |
| device_specific = common.DeviceSpecificParams( |
| input_zip=input_zip, |
| input_version=OPTIONS.info_dict["recovery_api_version"], |
| output_zip=output_zip, |
| script=script, |
| input_tmp=OPTIONS.input_tmp, |
| metadata=metadata, |
| info_dict=OPTIONS.info_dict) |
| |
| if not OPTIONS.omit_prereq: |
| ts = GetBuildProp("ro.build.date.utc", OPTIONS.info_dict) |
| ts_text = GetBuildProp("ro.build.date", OPTIONS.info_dict) |
| script.AssertOlderBuild(ts, ts_text) |
| |
| AppendAssertions(script, OPTIONS.info_dict) |
| device_specific.FullOTA_Assertions() |
| device_specific.FullOTA_InstallBegin() |
| |
| script.ShowProgress(0.5, 0) |
| |
| if OPTIONS.wipe_user_data: |
| script.FormatPartition("/data") |
| |
| if "selinux_fc" in OPTIONS.info_dict: |
| WritePolicyConfig(OPTIONS.info_dict["selinux_fc"], output_zip) |
| |
| script.FormatPartition("/system") |
| script.Mount("/system") |
| script.UnpackPackageDir("recovery", "/system") |
| script.UnpackPackageDir("system", "/system") |
| |
| symlinks = CopySystemFiles(input_zip, output_zip) |
| script.MakeSymlinks(symlinks) |
| |
| boot_img = common.GetBootableImage("boot.img", "boot.img", |
| OPTIONS.input_tmp, "BOOT") |
| recovery_img = common.GetBootableImage("recovery.img", "recovery.img", |
| OPTIONS.input_tmp, "RECOVERY") |
| MakeRecoveryPatch(OPTIONS.input_tmp, output_zip, recovery_img, boot_img) |
| |
| Item.GetMetadata(input_zip) |
| Item.Get("system").SetPermissions(script) |
| |
| common.CheckSize(boot_img.data, "boot.img", OPTIONS.info_dict) |
| common.ZipWriteStr(output_zip, "boot.img", boot_img.data) |
| script.ShowProgress(0.2, 0) |
| |
| script.ShowProgress(0.2, 10) |
| script.WriteRawImage("/boot", "boot.img") |
| |
| script.ShowProgress(0.1, 0) |
| device_specific.FullOTA_InstallEnd() |
| |
| if OPTIONS.extra_script is not None: |
| script.AppendExtra(OPTIONS.extra_script) |
| |
| script.UnmountAll() |
| script.AddToZip(input_zip, output_zip) |
| WriteMetadata(metadata, output_zip) |
| |
| def WritePolicyConfig(file_context, output_zip): |
| f = open(file_context, 'r'); |
| basename = os.path.basename(file_context) |
| common.ZipWriteStr(output_zip, basename, f.read()) |
| |
| |
| def WriteMetadata(metadata, output_zip): |
| common.ZipWriteStr(output_zip, "META-INF/com/android/metadata", |
| "".join(["%s=%s\n" % kv |
| for kv in sorted(metadata.iteritems())])) |
| |
| def LoadSystemFiles(z): |
| """Load all the files from SYSTEM/... in a given target-files |
| ZipFile, and return a dict of {filename: File object}.""" |
| out = {} |
| for info in z.infolist(): |
| if info.filename.startswith("SYSTEM/") and not IsSymlink(info): |
| basefilename = info.filename[7:] |
| fn = "system/" + basefilename |
| data = z.read(info.filename) |
| out[fn] = common.File(fn, data) |
| return out |
| |
| |
| def GetBuildProp(prop, info_dict): |
| """Return the fingerprint of the build of a given target-files info_dict.""" |
| try: |
| return info_dict.get("build.prop", {})[prop] |
| except KeyError: |
| raise common.ExternalError("couldn't find %s in build.prop" % (property,)) |
| |
| |
| def WriteIncrementalOTAPackage(target_zip, source_zip, output_zip): |
| source_version = OPTIONS.source_info_dict["recovery_api_version"] |
| target_version = OPTIONS.target_info_dict["recovery_api_version"] |
| |
| if source_version == 0: |
| print ("WARNING: generating edify script for a source that " |
| "can't install it.") |
| script = edify_generator.EdifyGenerator(source_version, |
| OPTIONS.target_info_dict) |
| |
| metadata = {"pre-device": GetBuildProp("ro.product.device", |
| OPTIONS.source_info_dict), |
| "post-timestamp": GetBuildProp("ro.build.date.utc", |
| OPTIONS.target_info_dict), |
| } |
| |
| device_specific = common.DeviceSpecificParams( |
| source_zip=source_zip, |
| source_version=source_version, |
| target_zip=target_zip, |
| target_version=target_version, |
| output_zip=output_zip, |
| script=script, |
| metadata=metadata, |
| info_dict=OPTIONS.info_dict) |
| |
| print "Loading target..." |
| target_data = LoadSystemFiles(target_zip) |
| print "Loading source..." |
| source_data = LoadSystemFiles(source_zip) |
| |
| verbatim_targets = [] |
| patch_list = [] |
| diffs = [] |
| renames = {} |
| largest_source_size = 0 |
| |
| matching_file_cache = {} |
| for fn in source_data.keys(): |
| sf = source_data[fn] |
| assert fn == sf.name |
| matching_file_cache["path:" + fn] = sf |
| # Only allow eligability for filename/sha matching |
| # if there isn't a perfect path match. |
| if target_data.get(sf.name) is None: |
| matching_file_cache["file:" + fn.split("/")[-1]] = sf |
| matching_file_cache["sha:" + sf.sha1] = sf |
| |
| for fn in sorted(target_data.keys()): |
| tf = target_data[fn] |
| assert fn == tf.name |
| sf = ClosestFileMatch(tf, matching_file_cache, renames) |
| if sf is not None and sf.name != tf.name: |
| print "File has moved from " + sf.name + " to " + tf.name |
| renames[sf.name] = tf |
| |
| if sf is None or fn in OPTIONS.require_verbatim: |
| # This file should be included verbatim |
| if fn in OPTIONS.prohibit_verbatim: |
| raise common.ExternalError("\"%s\" must be sent verbatim" % (fn,)) |
| print "send", fn, "verbatim" |
| tf.AddToZip(output_zip) |
| verbatim_targets.append((fn, tf.size)) |
| elif tf.sha1 != sf.sha1: |
| # File is different; consider sending as a patch |
| diffs.append(common.Difference(tf, sf)) |
| else: |
| # Target file data identical to source (may still be renamed) |
| pass |
| |
| common.ComputeDifferences(diffs) |
| |
| for diff in diffs: |
| tf, sf, d = diff.GetPatch() |
| if d is None or len(d) > tf.size * OPTIONS.patch_threshold: |
| # patch is almost as big as the file; don't bother patching |
| tf.AddToZip(output_zip) |
| verbatim_targets.append((tf.name, tf.size)) |
| else: |
| common.ZipWriteStr(output_zip, "patch/" + sf.name + ".p", d) |
| patch_list.append((sf.name, tf, sf, tf.size, common.sha1(d).hexdigest())) |
| largest_source_size = max(largest_source_size, sf.size) |
| |
| source_fp = GetBuildProp("ro.build.fingerprint", OPTIONS.source_info_dict) |
| target_fp = GetBuildProp("ro.build.fingerprint", OPTIONS.target_info_dict) |
| metadata["pre-build"] = source_fp |
| metadata["post-build"] = target_fp |
| |
| script.Mount("/system") |
| script.AssertSomeFingerprint(source_fp, target_fp) |
| |
| source_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.source_tmp, "BOOT", |
| OPTIONS.source_info_dict) |
| target_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.target_tmp, "BOOT") |
| updating_boot = (source_boot.data != target_boot.data) |
| |
| source_recovery = common.GetBootableImage( |
| "/tmp/recovery.img", "recovery.img", OPTIONS.source_tmp, "RECOVERY", |
| OPTIONS.source_info_dict) |
| target_recovery = common.GetBootableImage( |
| "/tmp/recovery.img", "recovery.img", OPTIONS.target_tmp, "RECOVERY") |
| updating_recovery = (source_recovery.data != target_recovery.data) |
| |
| # Here's how we divide up the progress bar: |
| # 0.1 for verifying the start state (PatchCheck calls) |
| # 0.8 for applying patches (ApplyPatch calls) |
| # 0.1 for unpacking verbatim files, symlinking, and doing the |
| # device-specific commands. |
| |
| AppendAssertions(script, OPTIONS.target_info_dict) |
| device_specific.IncrementalOTA_Assertions() |
| |
| script.Print("Verifying current system...") |
| |
| device_specific.IncrementalOTA_VerifyBegin() |
| |
| script.ShowProgress(0.1, 0) |
| total_verify_size = float(sum([i[2].size for i in patch_list]) + 1) |
| if updating_boot: |
| total_verify_size += source_boot.size |
| so_far = 0 |
| |
| for fn, tf, sf, size, patch_sha in patch_list: |
| script.PatchCheck("/"+fn, tf.sha1, sf.sha1) |
| so_far += sf.size |
| script.SetProgress(so_far / total_verify_size) |
| |
| if updating_boot: |
| d = common.Difference(target_boot, source_boot) |
| _, _, d = d.ComputePatch() |
| print "boot target: %d source: %d diff: %d" % ( |
| target_boot.size, source_boot.size, len(d)) |
| |
| common.ZipWriteStr(output_zip, "patch/boot.img.p", d) |
| |
| boot_type, boot_device = common.GetTypeAndDevice("/boot", OPTIONS.info_dict) |
| |
| script.PatchCheck("%s:%s:%d:%s:%d:%s" % |
| (boot_type, boot_device, |
| source_boot.size, source_boot.sha1, |
| target_boot.size, target_boot.sha1)) |
| so_far += source_boot.size |
| script.SetProgress(so_far / total_verify_size) |
| |
| if patch_list or updating_recovery or updating_boot: |
| script.CacheFreeSpaceCheck(largest_source_size) |
| |
| device_specific.IncrementalOTA_VerifyEnd() |
| |
| script.Comment("---- start making changes here ----") |
| |
| device_specific.IncrementalOTA_InstallBegin() |
| |
| if OPTIONS.wipe_user_data: |
| script.Print("Erasing user data...") |
| script.FormatPartition("/data") |
| |
| script.Print("Removing unneeded files...") |
| script.DeleteFiles(["/"+i[0] for i in verbatim_targets] + |
| ["/"+i for i in sorted(source_data) |
| if i not in target_data and |
| i not in renames] + |
| ["/system/recovery.img"]) |
| |
| script.ShowProgress(0.8, 0) |
| total_patch_size = float(sum([i[1].size for i in patch_list]) + 1) |
| if updating_boot: |
| total_patch_size += target_boot.size |
| so_far = 0 |
| |
| script.Print("Patching system files...") |
| deferred_patch_list = [] |
| for item in patch_list: |
| fn, tf, sf, size, _ = item |
| if tf.name == "system/build.prop": |
| deferred_patch_list.append(item) |
| continue |
| script.ApplyPatch("/"+fn, "-", tf.size, tf.sha1, sf.sha1, "patch/"+fn+".p") |
| so_far += tf.size |
| script.SetProgress(so_far / total_patch_size) |
| |
| if updating_boot: |
| # Produce the boot image by applying a patch to the current |
| # contents of the boot partition, and write it back to the |
| # partition. |
| script.Print("Patching boot image...") |
| script.ApplyPatch("%s:%s:%d:%s:%d:%s" |
| % (boot_type, boot_device, |
| source_boot.size, source_boot.sha1, |
| target_boot.size, target_boot.sha1), |
| "-", |
| target_boot.size, target_boot.sha1, |
| source_boot.sha1, "patch/boot.img.p") |
| so_far += target_boot.size |
| script.SetProgress(so_far / total_patch_size) |
| print "boot image changed; including." |
| else: |
| print "boot image unchanged; skipping." |
| |
| if updating_recovery: |
| # Recovery is generated as a patch using both the boot image |
| # (which contains the same linux kernel as recovery) and the file |
| # /system/etc/recovery-resource.dat (which contains all the images |
| # used in the recovery UI) as sources. This lets us minimize the |
| # size of the patch, which must be included in every OTA package. |
| # |
| # For older builds where recovery-resource.dat is not present, we |
| # use only the boot image as the source. |
| |
| MakeRecoveryPatch(OPTIONS.target_tmp, output_zip, |
| target_recovery, target_boot) |
| script.DeleteFiles(["/system/recovery-from-boot.p", |
| "/system/etc/install-recovery.sh"]) |
| print "recovery image changed; including as patch from boot." |
| else: |
| print "recovery image unchanged; skipping." |
| |
| script.ShowProgress(0.1, 10) |
| |
| target_symlinks = CopySystemFiles(target_zip, None) |
| |
| target_symlinks_d = dict([(i[1], i[0]) for i in target_symlinks]) |
| temp_script = script.MakeTemporary() |
| Item.GetMetadata(target_zip) |
| Item.Get("system").SetPermissions(temp_script) |
| |
| # Note that this call will mess up the tree of Items, so make sure |
| # we're done with it. |
| source_symlinks = CopySystemFiles(source_zip, None) |
| source_symlinks_d = dict([(i[1], i[0]) for i in source_symlinks]) |
| |
| # Delete all the symlinks in source that aren't in target. This |
| # needs to happen before verbatim files are unpacked, in case a |
| # symlink in the source is replaced by a real file in the target. |
| to_delete = [] |
| for dest, link in source_symlinks: |
| if link not in target_symlinks_d: |
| to_delete.append(link) |
| script.DeleteFiles(to_delete) |
| |
| if verbatim_targets: |
| script.Print("Unpacking new files...") |
| script.UnpackPackageDir("system", "/system") |
| |
| if updating_recovery: |
| script.Print("Unpacking new recovery...") |
| script.UnpackPackageDir("recovery", "/system") |
| |
| if len(renames) > 0: |
| script.Print("Renaming files...") |
| |
| for src in renames: |
| print "Renaming " + src + " to " + renames[src].name |
| script.RenameFile(src, renames[src].name) |
| |
| script.Print("Symlinks and permissions...") |
| |
| # Create all the symlinks that don't already exist, or point to |
| # somewhere different than what we want. Delete each symlink before |
| # creating it, since the 'symlink' command won't overwrite. |
| to_create = [] |
| for dest, link in target_symlinks: |
| if link in source_symlinks_d: |
| if dest != source_symlinks_d[link]: |
| to_create.append((dest, link)) |
| else: |
| to_create.append((dest, link)) |
| script.DeleteFiles([i[1] for i in to_create]) |
| script.MakeSymlinks(to_create) |
| |
| # Now that the symlinks are created, we can set all the |
| # permissions. |
| script.AppendScript(temp_script) |
| |
| # Do device-specific installation (eg, write radio image). |
| device_specific.IncrementalOTA_InstallEnd() |
| |
| if OPTIONS.extra_script is not None: |
| script.AppendExtra(OPTIONS.extra_script) |
| |
| # Patch the build.prop file last, so if something fails but the |
| # device can still come up, it appears to be the old build and will |
| # get set the OTA package again to retry. |
| script.Print("Patching remaining system files...") |
| for item in deferred_patch_list: |
| fn, tf, sf, size, _ = item |
| script.ApplyPatch("/"+fn, "-", tf.size, tf.sha1, sf.sha1, "patch/"+fn+".p") |
| script.SetPermissions("/system/build.prop", 0, 0, 0644, None, None) |
| |
| script.AddToZip(target_zip, output_zip) |
| WriteMetadata(metadata, output_zip) |
| |
| |
| def main(argv): |
| |
| def option_handler(o, a): |
| if o in ("-b", "--board_config"): |
| pass # deprecated |
| elif o in ("-k", "--package_key"): |
| OPTIONS.package_key = a |
| elif o in ("-i", "--incremental_from"): |
| OPTIONS.incremental_source = a |
| elif o in ("-w", "--wipe_user_data"): |
| OPTIONS.wipe_user_data = True |
| elif o in ("-n", "--no_prereq"): |
| OPTIONS.omit_prereq = True |
| elif o in ("-e", "--extra_script"): |
| OPTIONS.extra_script = a |
| elif o in ("-a", "--aslr_mode"): |
| if a in ("on", "On", "true", "True", "yes", "Yes"): |
| OPTIONS.aslr_mode = True |
| else: |
| OPTIONS.aslr_mode = False |
| elif o in ("--worker_threads"): |
| OPTIONS.worker_threads = int(a) |
| else: |
| return False |
| return True |
| |
| args = common.ParseOptions(argv, __doc__, |
| extra_opts="b:k:i:d:wne:a:", |
| extra_long_opts=["board_config=", |
| "package_key=", |
| "incremental_from=", |
| "wipe_user_data", |
| "no_prereq", |
| "extra_script=", |
| "worker_threads=", |
| "aslr_mode=", |
| ], |
| extra_option_handler=option_handler) |
| |
| if len(args) != 2: |
| common.Usage(__doc__) |
| sys.exit(1) |
| |
| if OPTIONS.extra_script is not None: |
| OPTIONS.extra_script = open(OPTIONS.extra_script).read() |
| |
| print "unzipping target target-files..." |
| OPTIONS.input_tmp, input_zip = common.UnzipTemp(args[0]) |
| |
| OPTIONS.target_tmp = OPTIONS.input_tmp |
| OPTIONS.info_dict = common.LoadInfoDict(input_zip) |
| |
| # If this image was originally labelled with SELinux contexts, make sure we |
| # also apply the labels in our new image. During building, the "file_contexts" |
| # is in the out/ directory tree, but for repacking from target-files.zip it's |
| # in the root directory of the ramdisk. |
| if "selinux_fc" in OPTIONS.info_dict: |
| OPTIONS.info_dict["selinux_fc"] = os.path.join(OPTIONS.input_tmp, "BOOT", "RAMDISK", |
| "file_contexts") |
| |
| if OPTIONS.verbose: |
| print "--- target info ---" |
| common.DumpInfoDict(OPTIONS.info_dict) |
| |
| if OPTIONS.device_specific is None: |
| OPTIONS.device_specific = OPTIONS.info_dict.get("tool_extensions", None) |
| if OPTIONS.device_specific is not None: |
| OPTIONS.device_specific = os.path.normpath(OPTIONS.device_specific) |
| print "using device-specific extensions in", OPTIONS.device_specific |
| |
| temp_zip_file = tempfile.NamedTemporaryFile() |
| output_zip = zipfile.ZipFile(temp_zip_file, "w", |
| compression=zipfile.ZIP_DEFLATED) |
| |
| if OPTIONS.incremental_source is None: |
| WriteFullOTAPackage(input_zip, output_zip) |
| if OPTIONS.package_key is None: |
| OPTIONS.package_key = OPTIONS.info_dict.get( |
| "default_system_dev_certificate", |
| "build/target/product/security/testkey") |
| else: |
| print "unzipping source target-files..." |
| OPTIONS.source_tmp, source_zip = common.UnzipTemp(OPTIONS.incremental_source) |
| OPTIONS.target_info_dict = OPTIONS.info_dict |
| OPTIONS.source_info_dict = common.LoadInfoDict(source_zip) |
| if OPTIONS.package_key is None: |
| OPTIONS.package_key = OPTIONS.source_info_dict.get( |
| "default_system_dev_certificate", |
| "build/target/product/security/testkey") |
| if OPTIONS.verbose: |
| print "--- source info ---" |
| common.DumpInfoDict(OPTIONS.source_info_dict) |
| WriteIncrementalOTAPackage(input_zip, source_zip, output_zip) |
| |
| output_zip.close() |
| |
| SignOutput(temp_zip_file.name, args[1]) |
| temp_zip_file.close() |
| |
| common.Cleanup() |
| |
| print "done." |
| |
| |
| if __name__ == '__main__': |
| try: |
| common.CloseInheritedPipes() |
| main(sys.argv[1:]) |
| except common.ExternalError, e: |
| print |
| print " ERROR: %s" % (e,) |
| print |
| sys.exit(1) |