Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / dalvik / 38329f5678fd7a4879528b02a0ab60322d38a897 / . / vm / interp / Interp.c
blob: f45e21a0f111f31e85932bc66686e5fed69033ba [file] [log] [blame]
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Main interpreter entry point and support functions.
*
* The entry point selects the "standard" or "debug" interpreter and
* facilitates switching between them. The standard interpreter may
* use the "fast" or "portable" implementation.
*
* Some debugger support functions are included here. Ideally their
* entire existence would be "#ifdef WITH_DEBUGGER", but we're not that
* aggressive in other parts of the code yet.
*/
#include "Dalvik.h"
#include "interp/InterpDefs.h"
/*
* ===========================================================================
* Debugger support
* ===========================================================================
*/
/*
* Initialize the breakpoint address lookup table when the debugger attaches.
*
* This shouldn't be necessary -- the global area is initially zeroed out,
* and the events should be cleaning up after themselves.
*/
void dvmInitBreakpoints(void)
{
#ifdef WITH_DEBUGGER
memset(gDvm.debugBreakAddr, 0, sizeof(gDvm.debugBreakAddr));
#else
assert(false);
#endif
}
/*
* Add an address to the list, putting it in the first non-empty slot.
*
* Sometimes the debugger likes to add two entries for one breakpoint.
* We add two entries here, so that we get the right behavior when it's
* removed twice.
*
* This will only be run from the JDWP thread, and it will happen while
* we are updating the event list, which is synchronized. We're guaranteed
* to be the only one adding entries, and the lock ensures that nobody
* will be trying to remove them while we're in here.
*
* "addr" is the absolute address of the breakpoint bytecode.
*/
void dvmAddBreakAddr(Method* method, int instrOffset)
{
#ifdef WITH_DEBUGGER
const u2* addr = method->insns + instrOffset;
const u2** ptr = gDvm.debugBreakAddr;
int i;
LOGV("BKP: add %p %s.%s (%s:%d)\n",
addr, method->clazz->descriptor, method->name,
dvmGetMethodSourceFile(method), dvmLineNumFromPC(method, instrOffset));
method->debugBreakpointCount++;
for (i = 0; i < MAX_BREAKPOINTS; i++, ptr++) {
if (*ptr == NULL) {
*ptr = addr;
break;
}
}
if (i == MAX_BREAKPOINTS) {
/* no room; size is too small or we're not cleaning up properly */
LOGE("ERROR: max breakpoints exceeded\n");
assert(false);
}
#else
assert(false);
#endif
}
/*
* Remove an address from the list by setting the entry to NULL.
*
* This can be called from the JDWP thread (because the debugger has
* cancelled the breakpoint) or from an event thread (because it's a
* single-shot breakpoint, e.g. "run to line"). We only get here as
* the result of removing an entry from the event list, which is
* synchronized, so it should not be possible for two threads to be
* updating breakpoints at the same time.
*/
void dvmClearBreakAddr(Method* method, int instrOffset)
{
#ifdef WITH_DEBUGGER
const u2* addr = method->insns + instrOffset;
const u2** ptr = gDvm.debugBreakAddr;
int i;
LOGV("BKP: clear %p %s.%s (%s:%d)\n",
addr, method->clazz->descriptor, method->name,
dvmGetMethodSourceFile(method), dvmLineNumFromPC(method, instrOffset));
method->debugBreakpointCount--;
assert(method->debugBreakpointCount >= 0);
for (i = 0; i < MAX_BREAKPOINTS; i++, ptr++) {
if (*ptr == addr) {
*ptr = NULL;
break;
}
}
if (i == MAX_BREAKPOINTS) {
/* didn't find it */
LOGE("ERROR: breakpoint on %p not found\n", addr);
assert(false);
}
#else
assert(false);
#endif
}
/*
* Add a single step event. Currently this is a global item.
*
* We set up some initial values based on the thread's current state. This
* won't work well if the thread is running, so it's up to the caller to
* verify that it's suspended.
*
* This is only called from the JDWP thread.
*/
bool dvmAddSingleStep(Thread* thread, int size, int depth)
{
#ifdef WITH_DEBUGGER
StepControl* pCtrl = &gDvm.stepControl;
if (pCtrl->active && thread != pCtrl->thread) {
LOGW("WARNING: single-step active for %p; adding %p\n",
pCtrl->thread, thread);
/*
* Keep going, overwriting previous. This can happen if you
* suspend a thread in Object.wait, hit the single-step key, then
* switch to another thread and do the same thing again.
* The first thread's step is still pending.
*
* TODO: consider making single-step per-thread. Adds to the
* overhead, but could be useful in rare situations.
*/
}
pCtrl->size = size;
pCtrl->depth = depth;
pCtrl->thread = thread;
/*
* We may be stepping into or over method calls, or running until we
* return from the current method. To make this work we need to track
* the current line, current method, and current stack depth. We need
* to be checking these after most instructions, notably those that
* call methods, return from methods, or are on a different line from the
* previous instruction.
*
* We have to start with a snapshot of the current state. If we're in
* an interpreted method, everything we need is in the current frame. If
* we're in a native method, possibly with some extra JNI frames pushed
* on by PushLocalFrame, we want to use the topmost native method.
*/
const StackSaveArea* saveArea;
void* fp;
void* prevFp = NULL;
for (fp = thread->curFrame; fp != NULL; fp = saveArea->prevFrame) {
const Method* method;
saveArea = SAVEAREA_FROM_FP(fp);
method = saveArea->method;
if (!dvmIsBreakFrame(fp) && !dvmIsNativeMethod(method))
break;
prevFp = fp;
}
if (fp == NULL) {
LOGW("Unexpected: step req in native-only threadid=%d\n",
thread->threadId);
return false;
}
if (prevFp != NULL) {
/*
* First interpreted frame wasn't the one at the bottom. Break
* frames are only inserted when calling from native->interp, so we
* don't need to worry about one being here.
*/
LOGV("##### init step while in native method\n");
fp = prevFp;
assert(!dvmIsBreakFrame(fp));
assert(dvmIsNativeMethod(SAVEAREA_FROM_FP(fp)->method));
saveArea = SAVEAREA_FROM_FP(fp);
}
/*
* Pull the goodies out. "xtra.currentPc" should be accurate since
* we update it on every instruction while the debugger is connected.
*/
pCtrl->method = saveArea->method;
// Clear out any old address set
if (pCtrl->pAddressSet != NULL) {
// (discard const)
free((void *)pCtrl->pAddressSet);
pCtrl->pAddressSet = NULL;
}
if (dvmIsNativeMethod(pCtrl->method)) {
pCtrl->line = -1;
} else {
pCtrl->line = dvmLineNumFromPC(saveArea->method,
saveArea->xtra.currentPc - saveArea->method->insns);
pCtrl->pAddressSet
= dvmAddressSetForLine(saveArea->method, pCtrl->line);
}
pCtrl->frameDepth = dvmComputeVagueFrameDepth(thread, thread->curFrame);
pCtrl->active = true;
LOGV("##### step init: thread=%p meth=%p '%s' line=%d frameDepth=%d depth=%s size=%s\n",
pCtrl->thread, pCtrl->method, pCtrl->method->name,
pCtrl->line, pCtrl->frameDepth,
dvmJdwpStepDepthStr(pCtrl->depth),
dvmJdwpStepSizeStr(pCtrl->size));
return true;
#else
assert(false);
return false;
#endif
}
/*
* Disable a single step event.
*/
void dvmClearSingleStep(Thread* thread)
{
#ifdef WITH_DEBUGGER
UNUSED_PARAMETER(thread);
gDvm.stepControl.active = false;
#else
assert(false);
#endif
}
/*
* Recover the "this" pointer from the current interpreted method. "this"
* is always in "in0" for non-static methods.
*
* The "ins" start at (#of registers - #of ins). Note in0 != v0.
*
* This works because "dx" guarantees that it will work. It's probably
* fairly common to have a virtual method that doesn't use its "this"
* pointer, in which case we're potentially wasting a register. However,
* the debugger doesn't treat "this" as just another argument. For
* example, events (such as breakpoints) can be enabled for specific
* values of "this". There is also a separate StackFrame.ThisObject call
* in JDWP that is expected to work for any non-native non-static method.
*
* Because we need it when setting up debugger event filters, we want to
* be able to do this quickly.
*/
Object* dvmGetThisPtr(const Method* method, const u4* fp)
{
if (dvmIsStaticMethod(method))
return NULL;
return (Object*)fp[method->registersSize - method->insSize];
}
#if defined(WITH_TRACKREF_CHECKS)
/*
* Verify that all internally-tracked references have been released. If
* they haven't, print them and abort the VM.
*
* "debugTrackedRefStart" indicates how many refs were on the list when
* we were first invoked.
*/
void dvmInterpCheckTrackedRefs(Thread* self, const Method* method,
int debugTrackedRefStart)
{
if (dvmReferenceTableEntries(&self->internalLocalRefTable)
!= (size_t) debugTrackedRefStart)
{
char* desc;
Object** top;
int count;
count = dvmReferenceTableEntries(&self->internalLocalRefTable);
LOGE("TRACK: unreleased internal reference (prev=%d total=%d)\n",
debugTrackedRefStart, count);
desc = dexProtoCopyMethodDescriptor(&method->prototype);
LOGE(" current method is %s.%s %s\n", method->clazz->descriptor,
method->name, desc);
free(desc);
top = self->internalLocalRefTable.table + debugTrackedRefStart;
while (top < self->internalLocalRefTable.nextEntry) {
LOGE(" %p (%s)\n",
*top,
((*top)->clazz != NULL) ? (*top)->clazz->descriptor : "");
top++;
}
dvmDumpThread(self, false);
dvmAbort();
}
//LOGI("TRACK OK\n");
}
#endif
#ifdef LOG_INSTR
/*
* Dump the v-registers. Sent to the ILOG log tag.
*/
void dvmDumpRegs(const Method* method, const u4* framePtr, bool inOnly)
{
int i, localCount;
localCount = method->registersSize - method->insSize;
LOG(LOG_VERBOSE, LOG_TAG"i", "Registers (fp=%p):\n", framePtr);
for (i = method->registersSize-1; i >= 0; i--) {
if (i >= localCount) {
LOG(LOG_VERBOSE, LOG_TAG"i", " v%-2d in%-2d : 0x%08x\n",
i, i-localCount, framePtr[i]);
} else {
if (inOnly) {
LOG(LOG_VERBOSE, LOG_TAG"i", " [...]\n");
break;
}
const char* name = "";
int j;
#if 0 // "locals" structure has changed -- need to rewrite this
DexFile* pDexFile = method->clazz->pDexFile;
const DexCode* pDexCode = dvmGetMethodCode(method);
int localsSize = dexGetLocalsSize(pDexFile, pDexCode);
const DexLocal* locals = dvmDexGetLocals(pDexFile, pDexCode);
for (j = 0; j < localsSize, j++) {
if (locals[j].registerNum == (u4) i) {
name = dvmDexStringStr(locals[j].pName);
break;
}
}
#endif
LOG(LOG_VERBOSE, LOG_TAG"i", " v%-2d : 0x%08x %s\n",
i, framePtr[i], name);
}
}
}
#endif
/*
* ===========================================================================
* Entry point and general support functions
* ===========================================================================
*/
/*
* Construct an s4 from two consecutive half-words of switch data.
* This needs to check endianness because the DEX optimizer only swaps
* half-words in instruction stream.
*
* "switchData" must be 32-bit aligned.
*/
#if __BYTE_ORDER == __LITTLE_ENDIAN
static inline s4 s4FromSwitchData(const void* switchData) {
return *(s4*) switchData;
}
#else
static inline s4 s4FromSwitchData(const void* switchData) {
u2* data = switchData;
return data[0] | (((s4) data[1]) << 16);
}
#endif
/*
* Find the matching case. Returns the offset to the handler instructions.
*
* Returns 3 if we don't find a match (it's the size of the packed-switch
* instruction).
*/
s4 dvmInterpHandlePackedSwitch(const u2* switchData, s4 testVal)
{
const int kInstrLen = 3;
u2 size;
s4 firstKey;
const s4* entries;
/*
* Packed switch data format:
* ushort ident = 0x0100 magic value
* ushort size number of entries in the table
* int first_key first (and lowest) switch case value
* int targets[size] branch targets, relative to switch opcode
*
* Total size is (4+size*2) 16-bit code units.
*/
if (*switchData++ != kPackedSwitchSignature) {
/* should have been caught by verifier */
dvmThrowException("Ljava/lang/InternalError;",
"bad packed switch magic");
return kInstrLen;
}
size = *switchData++;
assert(size > 0);
firstKey = *switchData++;
firstKey |= (*switchData++) << 16;
if (testVal < firstKey || testVal >= firstKey + size) {
LOGVV("Value %d not found in switch (%d-%d)\n",
testVal, firstKey, firstKey+size-1);
return kInstrLen;
}
/* The entries are guaranteed to be aligned on a 32-bit boundary;
* we can treat them as a native int array.
*/
entries = (const s4*) switchData;
assert(((u4)entries & 0x3) == 0);
assert(testVal - firstKey >= 0 && testVal - firstKey < size);
LOGVV("Value %d found in slot %d (goto 0x%02x)\n",
testVal, testVal - firstKey,
s4FromSwitchData(&entries[testVal - firstKey]));
return s4FromSwitchData(&entries[testVal - firstKey]);
}
/*
* Find the matching case. Returns the offset to the handler instructions.
*
* Returns 3 if we don't find a match (it's the size of the sparse-switch
* instruction).
*/
s4 dvmInterpHandleSparseSwitch(const u2* switchData, s4 testVal)
{
const int kInstrLen = 3;
u2 ident, size;
const s4* keys;
const s4* entries;
int i;
/*
* Sparse switch data format:
* ushort ident = 0x0200 magic value
* ushort size number of entries in the table; > 0
* int keys[size] keys, sorted low-to-high; 32-bit aligned
* int targets[size] branch targets, relative to switch opcode
*
* Total size is (2+size*4) 16-bit code units.
*/
if (*switchData++ != kSparseSwitchSignature) {
/* should have been caught by verifier */
dvmThrowException("Ljava/lang/InternalError;",
"bad sparse switch magic");
return kInstrLen;
}
size = *switchData++;
assert(size > 0);
/* The keys are guaranteed to be aligned on a 32-bit boundary;
* we can treat them as a native int array.
*/
keys = (const s4*) switchData;
assert(((u4)keys & 0x3) == 0);
/* The entries are guaranteed to be aligned on a 32-bit boundary;
* we can treat them as a native int array.
*/
entries = keys + size;
assert(((u4)entries & 0x3) == 0);
/*
* Run through the list of keys, which are guaranteed to
* be sorted low-to-high.
*
* Most tables have 3-4 entries. Few have more than 10. A binary
* search here is probably not useful.
*/
for (i = 0; i < size; i++) {
s4 k = s4FromSwitchData(&keys[i]);
if (k == testVal) {
LOGVV("Value %d found in entry %d (goto 0x%02x)\n",
testVal, i, s4FromSwitchData(&entries[i]));
return s4FromSwitchData(&entries[i]);
} else if (k > testVal) {
break;
}
}
LOGVV("Value %d not found in switch\n", testVal);
return kInstrLen;
}
/*
* Copy data for a fill-array-data instruction. On a little-endian machine
* we can just do a memcpy(), on a big-endian system we have work to do.
*
* The trick here is that dexopt has byte-swapped each code unit, which is
* exactly what we want for short/char data. For byte data we need to undo
* the swap, and for 4- or 8-byte values we need to swap pieces within
* each word.
*/
static void copySwappedArrayData(void* dest, const u2* src, u4 size, u2 width)
{
#if __BYTE_ORDER == __LITTLE_ENDIAN
memcpy(dest, src, size*width);
#else
int i;
switch (width) {
case 1:
/* un-swap pairs of bytes as we go */
for (i = (size-1) & ~1; i >= 0; i -= 2) {
((u1*)dest)[i] = ((u1*)src)[i+1];
((u1*)dest)[i+1] = ((u1*)src)[i];
}
/*
* "src" is padded to end on a two-byte boundary, but we don't want to
* assume "dest" is, so we handle odd length specially.
*/
if ((size & 1) != 0) {
((u1*)dest)[size-1] = ((u1*)src)[size];
}
break;
case 2:
/* already swapped correctly */
memcpy(dest, src, size*width);
break;
case 4:
/* swap word halves */
for (i = 0; i < (int) size; i++) {
((u4*)dest)[i] = (src[(i << 1) + 1] << 16) | src[i << 1];
}
break;
case 8:
/* swap word halves and words */
for (i = 0; i < (int) (size << 1); i += 2) {
((int*)dest)[i] = (src[(i << 1) + 3] << 16) | src[(i << 1) + 2];
((int*)dest)[i+1] = (src[(i << 1) + 1] << 16) | src[i << 1];
}
break;
default:
LOGE("Unexpected width %d in copySwappedArrayData\n", width);
dvmAbort();
break;
}
#endif
}
/*
* Fill the array with predefined constant values.
*
* Returns true if job is completed, otherwise false to indicate that
* an exception has been thrown.
*/
bool dvmInterpHandleFillArrayData(ArrayObject* arrayObj, const u2* arrayData)
{
u2 width;
u4 size;
if (arrayObj == NULL) {
dvmThrowException("Ljava/lang/NullPointerException;", NULL);
return false;
}
/*
* Array data table format:
* ushort ident = 0x0300 magic value
* ushort width width of each element in the table
* uint size number of elements in the table
* ubyte data[size*width] table of data values (may contain a single-byte
* padding at the end)
*
* Total size is 4+(width * size + 1)/2 16-bit code units.
*/
if (arrayData[0] != kArrayDataSignature) {
dvmThrowException("Ljava/lang/InternalError;", "bad array data magic");
return false;
}
width = arrayData[1];
size = arrayData[2] | (((u4)arrayData[3]) << 16);
if (size > arrayObj->length) {
dvmThrowException("Ljava/lang/ArrayIndexOutOfBoundsException;", NULL);
return false;
}
copySwappedArrayData(arrayObj->contents, &arrayData[4], size, width);
return true;
}
/*
* Find the concrete method that corresponds to "methodIdx". The code in
* "method" is executing invoke-method with "thisClass" as its first argument.
*
* Returns NULL with an exception raised on failure.
*/
Method* dvmInterpFindInterfaceMethod(ClassObject* thisClass, u4 methodIdx,
const Method* method, DvmDex* methodClassDex)
{
Method* absMethod;
Method* methodToCall;
int i, vtableIndex;
/*
* Resolve the method. This gives us the abstract method from the
* interface class declaration.
*/
absMethod = dvmDexGetResolvedMethod(methodClassDex, methodIdx);
if (absMethod == NULL) {
absMethod = dvmResolveInterfaceMethod(method->clazz, methodIdx);
if (absMethod == NULL) {
LOGV("+ unknown method\n");
return NULL;
}
}
/* make sure absMethod->methodIndex means what we think it means */
assert(dvmIsAbstractMethod(absMethod));
/*
* Run through the "this" object's iftable. Find the entry for
* absMethod's class, then use absMethod->methodIndex to find
* the method's entry. The value there is the offset into our
* vtable of the actual method to execute.
*
* The verifier does not guarantee that objects stored into
* interface references actually implement the interface, so this
* check cannot be eliminated.
*/
for (i = 0; i < thisClass->iftableCount; i++) {
if (thisClass->iftable[i].clazz == absMethod->clazz)
break;
}
if (i == thisClass->iftableCount) {
/* impossible in verified DEX, need to check for it in unverified */
dvmThrowException("Ljava/lang/IncompatibleClassChangeError;",
"interface not implemented");
return NULL;
}
assert(absMethod->methodIndex <
thisClass->iftable[i].clazz->virtualMethodCount);
vtableIndex =
thisClass->iftable[i].methodIndexArray[absMethod->methodIndex];
assert(vtableIndex >= 0 && vtableIndex < thisClass->vtableCount);
methodToCall = thisClass->vtable[vtableIndex];
#if 0
/* this can happen when there's a stale class file */
if (dvmIsAbstractMethod(methodToCall)) {
dvmThrowException("Ljava/lang/AbstractMethodError;",
"interface method not implemented");
return NULL;
}
#else
assert(!dvmIsAbstractMethod(methodToCall) ||
methodToCall->nativeFunc != NULL);
#endif
LOGVV("+++ interface=%s.%s concrete=%s.%s\n",
absMethod->clazz->descriptor, absMethod->name,
methodToCall->clazz->descriptor, methodToCall->name);
assert(methodToCall != NULL);
return methodToCall;
}
/*
* Helpers for dvmThrowVerificationError().
*
* Each returns a newly-allocated string.
*/
#define kThrowShow_accessFromClass 1
static char* classNameFromIndex(const Method* method, int ref, int flags)
{
static const int kBufLen = 256;
const DvmDex* pDvmDex = method->clazz->pDvmDex;
const char* className = dexStringByTypeIdx(pDvmDex->pDexFile, ref);
char* dotClassName = dvmDescriptorToDot(className);
if (flags == 0)
return dotClassName;
char* result = (char*) malloc(kBufLen);
if ((flags & kThrowShow_accessFromClass) != 0) {
char* dotFromName = dvmDescriptorToDot(method->clazz->descriptor);
snprintf(result, kBufLen, "tried to access class %s from class %s",
dotClassName, dotFromName);
free(dotFromName);
} else {
assert(false); // should've been caught above
result[0] = '\0';
}
free(dotClassName);
return result;
}
static char* fieldNameFromIndex(const Method* method, int ref, int flags)
{
static const int kBufLen = 256;
const DvmDex* pDvmDex = method->clazz->pDvmDex;
const DexFieldId* pFieldId;
const char* className;
const char* fieldName;
pFieldId = dexGetFieldId(pDvmDex->pDexFile, ref);
className = dexStringByTypeIdx(pDvmDex->pDexFile, pFieldId->classIdx);
fieldName = dexStringById(pDvmDex->pDexFile, pFieldId->nameIdx);
char* dotName = dvmDescriptorToDot(className);
char* result = (char*) malloc(kBufLen);
if ((flags & kThrowShow_accessFromClass) != 0) {
char* dotFromName = dvmDescriptorToDot(method->clazz->descriptor);
snprintf(result, kBufLen, "tried to access field %s.%s from class %s",
dotName, fieldName, dotFromName);
free(dotFromName);
} else {
snprintf(result, kBufLen, "%s.%s", dotName, fieldName);
}
free(dotName);
return result;
}
static char* methodNameFromIndex(const Method* method, int ref, int flags)
{
static const int kBufLen = 384;
const DvmDex* pDvmDex = method->clazz->pDvmDex;
const DexMethodId* pMethodId;
const char* className;
const char* methodName;
pMethodId = dexGetMethodId(pDvmDex->pDexFile, ref);
className = dexStringByTypeIdx(pDvmDex->pDexFile, pMethodId->classIdx);
methodName = dexStringById(pDvmDex->pDexFile, pMethodId->nameIdx);
char* dotName = dvmDescriptorToDot(className);
char* result = (char*) malloc(kBufLen);
if ((flags & kThrowShow_accessFromClass) != 0) {
char* dotFromName = dvmDescriptorToDot(method->clazz->descriptor);
char* desc = dexProtoCopyMethodDescriptor(&method->prototype);
snprintf(result, kBufLen,
"tried to access method %s.%s:%s from class %s",
dotName, methodName, desc, dotFromName);
free(dotFromName);
free(desc);
} else {
snprintf(result, kBufLen, "%s.%s", dotName, methodName);
}
free(dotName);
return result;
}
/*
* Throw an exception for a problem identified by the verifier.
*
* This is used by the invoke-verification-error instruction. It always
* throws an exception.
*
* "kind" indicates the kind of failure encountered by the verifier. The
* meaning of "ref" is kind-specific; it's usually an index to a
* class, field, or method reference.
*/
void dvmThrowVerificationError(const Method* method, int kind, int ref)
{
const char* exceptionName = "Ljava/lang/VerifyError;";
char* msg = NULL;
switch ((VerifyError) kind) {
case VERIFY_ERROR_NO_CLASS:
exceptionName = "Ljava/lang/NoClassDefFoundError;";
msg = classNameFromIndex(method, ref, 0);
break;
case VERIFY_ERROR_NO_FIELD:
exceptionName = "Ljava/lang/NoSuchFieldError;";
msg = fieldNameFromIndex(method, ref, 0);
break;
case VERIFY_ERROR_NO_METHOD:
exceptionName = "Ljava/lang/NoSuchMethodError;";
msg = methodNameFromIndex(method, ref, 0);
break;
case VERIFY_ERROR_ACCESS_CLASS:
exceptionName = "Ljava/lang/IllegalAccessError;";
msg = classNameFromIndex(method, ref, kThrowShow_accessFromClass);
break;
case VERIFY_ERROR_ACCESS_FIELD:
exceptionName = "Ljava/lang/IllegalAccessError;";
msg = fieldNameFromIndex(method, ref, kThrowShow_accessFromClass);
break;
case VERIFY_ERROR_ACCESS_METHOD:
exceptionName = "Ljava/lang/IllegalAccessError;";
msg = methodNameFromIndex(method, ref, kThrowShow_accessFromClass);
break;
case VERIFY_ERROR_CLASS_CHANGE:
exceptionName = "Ljava/lang/IncompatibleClassChangeError;";
msg = classNameFromIndex(method, ref, 0);
break;
case VERIFY_ERROR_INSTANTIATION:
exceptionName = "Ljava/lang/InstantiationError;";
msg = classNameFromIndex(method, ref, 0);
break;
case VERIFY_ERROR_GENERIC:
/* generic VerifyError; use default exception, no message */
break;
case VERIFY_ERROR_NONE:
/* should never happen; use default exception */
assert(false);
msg = strdup("weird - no error specified");
break;
/* no default clause -- want warning if enum updated */
}
dvmThrowException(exceptionName, msg);
free(msg);
}
/*
* Main interpreter loop entry point. Select "standard" or "debug"
* interpreter and switch between them as required.
*
* This begins executing code at the start of "method". On exit, "pResult"
* holds the return value of the method (or, if "method" returns NULL, it
* holds an undefined value).
*
* The interpreted stack frame, which holds the method arguments, has
* already been set up.
*/
void dvmInterpret(Thread* self, const Method* method, JValue* pResult)
{
InterpState interpState;
bool change;
#if defined(WITH_JIT)
/* Interpreter entry points from compiled code */
extern void dvmJitToInterpNormal();
extern void dvmJitToInterpNoChain();
extern void dvmJitToInterpPunt();
extern void dvmJitToInterpSingleStep();
extern void dvmJitToTraceSelect();
extern void dvmJitToPatchPredictedChain();
/*
* Reserve a static entity here to quickly setup runtime contents as
* gcc will issue block copy instructions.
*/
static struct JitToInterpEntries jitToInterpEntries = {
dvmJitToInterpNormal,
dvmJitToInterpNoChain,
dvmJitToInterpPunt,
dvmJitToInterpSingleStep,
dvmJitToTraceSelect,
dvmJitToPatchPredictedChain,
};
#endif
#if defined(WITH_TRACKREF_CHECKS)
interpState.debugTrackedRefStart =
dvmReferenceTableEntries(&self->internalLocalRefTable);
#endif
#if defined(WITH_PROFILER) || defined(WITH_DEBUGGER)
interpState.debugIsMethodEntry = true;
#endif
#if defined(WITH_JIT)
interpState.jitState = gDvmJit.pJitEntryTable ? kJitNormal : kJitOff;
/* Setup the Jit-to-interpreter entry points */
interpState.jitToInterpEntries = jitToInterpEntries;
/*
* Initialize the threshold filter [don't bother to zero out the
* actual table. We're looking for matches, and an occasional
* false positive is acceptible.
*/
interpState.lastThreshFilter = 0;
#endif
/*
* Initialize working state.
*
* No need to initialize "retval".
*/
interpState.method = method;
interpState.fp = (u4*) self->curFrame;
interpState.pc = method->insns;
interpState.entryPoint = kInterpEntryInstr;
if (dvmDebuggerOrProfilerActive())
interpState.nextMode = INTERP_DBG;
else
interpState.nextMode = INTERP_STD;
assert(!dvmIsNativeMethod(method));
/*
* Make sure the class is ready to go. Shouldn't be possible to get
* here otherwise.
*/
if (method->clazz->status < CLASS_INITIALIZING ||
method->clazz->status == CLASS_ERROR)
{
LOGE("ERROR: tried to execute code in unprepared class '%s' (%d)\n",
method->clazz->descriptor, method->clazz->status);
dvmDumpThread(self, false);
dvmAbort();
}
typedef bool (*Interpreter)(Thread*, InterpState*);
Interpreter stdInterp;
if (gDvm.executionMode == kExecutionModeInterpFast)
stdInterp = dvmMterpStd;
#if defined(WITH_JIT)
else if (gDvm.executionMode == kExecutionModeJit)
/* If profiling overhead can be kept low enough, we can use a profiling
* mterp fast for both Jit and "fast" modes. If overhead is too high,
* create a specialized profiling interpreter.
*/
stdInterp = dvmMterpStd;
#endif
else
stdInterp = dvmInterpretStd;
change = true;
while (change) {
switch (interpState.nextMode) {
case INTERP_STD:
LOGVV("threadid=%d: interp STD\n", self->threadId);
change = (*stdInterp)(self, &interpState);
break;
#if defined(WITH_PROFILER) || defined(WITH_DEBUGGER) || defined(WITH_JIT)
case INTERP_DBG:
LOGVV("threadid=%d: interp DBG\n", self->threadId);
change = dvmInterpretDbg(self, &interpState);
break;
#endif
default:
dvmAbort();
}
}
*pResult = interpState.retval;
}