Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / dalvik / 8ba2708ea118381f2df5ca55b9bad2ae4c050504 / . / vm / mterp / out / InterpAsm-x86.S
blob: c6542024a680a1eb92a415339ad9cf3f950df22a [file] [log] [blame]
/*
* This file was generated automatically by gen-mterp.py for 'x86'.
*
* --> DO NOT EDIT <--
*/
/* File: x86/header.S */
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* 32-bit x86 definitions and declarations.
*/
/*
386 ABI general notes:
Caller save set:
eax, edx, ecx, st(0)-st(7)
Callee save set:
ebx, esi, edi, ebp
Return regs:
32-bit in eax
64-bit in edx:eax (low-order 32 in eax)
fp on top of fp stack st(0)
Parameters passed on stack, pushed right-to-left. On entry to target, first
parm is at 4(%esp). Traditional entry code is:
functEntry:
push %ebp # save old frame pointer
mov %ebp,%esp # establish new frame pointer
sub FrameSize,%esp # Allocate storage for spill, locals & outs
Once past the prologue, arguments are referenced at ((argno + 2)*4)(%ebp)
Alignment of stack not strictly required, but should be for performance. We'll
align frame sizes to 16-byte multiples.
If we're not doing variable stack allocation (alloca), the frame pointer can be
eliminated and all arg references adjusted to be esp relative.
Mterp notes:
Some key interpreter variables will be assigned to registers. Note that each
will also have an associated spill location (mostly used useful for those assigned
to callee save registers).
nick reg purpose
rPC edx interpreted program counter, used for fetching instructions
rFP esi interpreted frame pointer, used for accessing locals and args
rIBASE edi Base pointer for instruction dispatch computed goto
rINST bx first 16-bit code of current instruction
rOPCODE bl opcode portion of instruction word
rINST_HI bh high byte of instruction word, usually contains src/tgt reg names
Notes:
o High order 16 bits of ebx must be zero on entry to handler
o rPC, rFP, rIBASE, rINST/rOPCODE valid on handler entry and exit
o eax and ecx are scratch, rINST/ebx sometimes scratch
o rPC is in the caller save set, and will be killed across external calls. Don't
forget to SPILL/UNSPILL it around call points
*/
#define rPC %edx
#define rFP %esi
#define rIBASE %edi
#define rINST_FULL %ebx
#define rINST %bx
#define rINST_HI %bh
#define rINST_LO %bl
#define rOPCODE %bl
/* Frame diagram while executing dvmMterpStdRun, high to low addresses */
#define IN_ARG0 ( 8)
#define CALLER_RP ( 4)
#define PREV_FP ( 0) /* <- dvmMterpStdRun ebp */
/* Spill offsets relative to %ebp */
#define EDI_SPILL ( -4)
#define ESI_SPILL ( -8)
#define EDX_SPILL (-12) /* <- esp following dmMterpStdRun header */
#define rPC_SPILL (-16)
#define rFP_SPILL (-20)
#define rGLUE_SPILL (-24)
#define rIBASE_SPILL (-28)
#define rINST_FULL_SPILL (-32)
#define TMP_SPILL (-36)
#define LOCAL0_OFFSET (-40)
#define LOCAL1_OFFSET (-44)
#define LOCAL2_OFFSET (-48)
#define LOCAL3_OFFSET (-52)
/* Out Arg offsets, relative to %sp */
#define OUT_ARG4 ( 16)
#define OUT_ARG3 ( 12)
#define OUT_ARG2 ( 8)
#define OUT_ARG1 ( 4)
#define OUT_ARG0 ( 0) /* <- dvmMterpStdRun esp */
#define SPILL(reg) movl reg##,reg##_SPILL(%ebp)
#define UNSPILL(reg) movl reg##_SPILL(%ebp),reg
#define SPILL_TMP(reg) movl reg,TMP_SPILL(%ebp)
#define UNSPILL_TMP(reg) movl TMP_SPILL(%ebp),reg
/* save/restore the PC and/or FP from the glue struct */
#define LOAD_PC_FROM_GLUE(_glu) movl offGlue_pc(_glu),rPC
#define SAVE_PC_TO_GLUE(_glu) movl rPC,offGlue_pc(_glu)
#define LOAD_FP_FROM_GLUE(_glu) movl offGlue_fp(_glu),rFP
#define SAVE_FP_TO_GLUE(_glu) movl rFP,offGlue_fp(_glu)
#define GET_GLUE(_reg) movl rGLUE_SPILL(%ebp),_reg
/* The interpreter assumes a properly aligned stack on entry, and
* will preserve 16-byte alignment.
*/
/*
* "export" the PC to the interpreted stack frame, f/b/o future exception
* objects. Must * be done *before* something calls dvmThrowException.
*
* In C this is "SAVEAREA_FROM_FP(fp)->xtra.currentPc = pc", i.e.
* fp - sizeof(StackSaveArea) + offsetof(SaveArea, xtra.currentPc)
*
* It's okay to do this more than once.
*/
#define EXPORT_PC() \
movl rPC, (-sizeofStackSaveArea + offStackSaveArea_currentPc)(rFP)
/*
* Given a frame pointer, find the stack save area.
*
* In C this is "((StackSaveArea*)(_fp) -1)".
*/
#define SAVEAREA_FROM_FP(_reg, _fpreg) \
leal -sizeofStackSaveArea(_fpreg),_reg
/*
* Fetch the next instruction from rPC into rINST. Does not advance rPC.
*/
#define FETCH_INST() movzwl (rPC),rINST_FULL
/*
* Fetch the nth instruction word from rPC into rINST. Does not advance
* rPC, and _count is in words
*/
#define FETCH_INST_WORD(_count) movzwl _count*2(rPC),rINST_FULL
/*
* Fetch instruction word indexed (used for branching).
* Index is in instruction word units.
*/
#define FETCH_INST_INDEXED(_reg) movzwl (rPC,_reg,2),rINST_FULL
/*
* Extract the opcode of the instruction in rINST
*/
#define EXTRACT_OPCODE(_reg) movzx rOPCODE,_reg
/*
* Advance rPC by instruction count
*/
#define ADVANCE_PC(_count) leal 2*_count(rPC),rPC
/*
* Advance rPC by branch offset in register
*/
#define ADVANCE_PC_INDEXED(_reg) leal (rPC,_reg,2),rPC
/*
* Note: assumes opcode previously fetched and in rINST, and
* %eax is killable at this point.
*/
#if 1
.macro GOTO_NEXT
/* For computed next version */
movzx rOPCODE,%eax
sall $6,%eax
addl rIBASE,%eax
jmp *%eax
.endm
#else
/* For jump table version */
.macro GOTO_NEXT
movzx rOPCODE,%eax
jmp *(rIBASE,%eax,4)
.endm
#endif
/*
* Get/set the 32-bit value from a Dalvik register.
*/
#define GET_VREG(_reg, _vreg) movl (rFP,_vreg,4),_reg
#define SET_VREG(_reg, _vreg) movl _reg,(rFP,_vreg,4)
#define GET_VREG_WORD(_reg, _vreg, _offset) movl 4*(_offset)(rFP,_vreg,4),_reg
#define SET_VREG_WORD(_reg, _vreg, _offset) movl _reg,4*(_offset)(rFP,_vreg,4)
/*
* This is a #include, not a %include, because we want the C pre-processor
* to expand the macros into assembler assignment statements.
*/
#include "../common/asm-constants.h"
.global dvmAsmInstructionStart
.type dvmAsmInstructionStart, %function
dvmAsmInstructionStart = .L_OP_NOP
.text
/* ------------------------------ */
.balign 64
.L_OP_NOP: /* 0x00 */
/* File: x86/OP_NOP.S */
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE: /* 0x01 */
/* File: x86/OP_MOVE.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
movzbl rINST_HI,%eax # eax<- BA
andb $0xf,%al # eax<- A
shrl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
SET_VREG(%ecx,%eax) # fp[A]<-fp[B]
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_FROM16: /* 0x02 */
/* File: x86/OP_MOVE_FROM16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
movzx rINST_HI,%eax # eax <= AA
movw 2(rPC),rINST # rINST <= BBBB
GET_VREG (%ecx,rINST_FULL) # ecx<- fp[BBBB]
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG (%ecx,%eax) # fp[AA]<- ecx]
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_16: /* 0x03 */
/* File: x86/OP_MOVE_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
movzwl 4(rPC),%ecx # ecx<- BBBB
movzwl 2(rPC),%eax # eax<- AAAA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(3)
ADVANCE_PC(3)
SET_VREG(%ecx,%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_WIDE: /* 0x04 */
/* File: x86/OP_MOVE_WIDE.S */
/* move-wide vA, vB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
movzbl rINST_HI,%ecx # ecx <- BA
sarl $12,rINST_FULL # rinst_FULL<- B
GET_VREG_WORD(%eax,rINST_FULL,0) # eax<- v[B+0]
GET_VREG_WORD(rINST_FULL,rINST_FULL,1) # rINST_FULL<- v[B+1]
andb $0xf,%cl # ecx <- A
SET_VREG_WORD(rINST_FULL,%ecx,1) # v[A+1]<- rINST_FULL
FETCH_INST_WORD(1)
ADVANCE_PC(1)
SET_VREG_WORD(%eax,%ecx,0) # v[A+0]<- eax
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_WIDE_FROM16: /* 0x05 */
/* File: x86/OP_MOVE_WIDE_FROM16.S */
/* move-wide/from16 vAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
movzwl 2(rPC),%ecx # ecx<- BBBB
movzbl rINST_HI,%eax # eax<- AAAA
GET_VREG_WORD(rINST_FULL,%ecx,0) # rINST_FULL<- v[BBBB+0]
GET_VREG_WORD(%ecx,%ecx,1) # ecx<- v[BBBB+1]
SET_VREG_WORD(rINST_FULL,%eax,0) # v[AAAA+0]<- rINST_FULL
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG_WORD(%ecx,%eax,1) # v[AAAA+1]<- eax
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_WIDE_16: /* 0x06 */
/* File: x86/OP_MOVE_WIDE_16.S */
/* move-wide/16 vAAAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
movzwl 4(rPC),%ecx # ecx<- BBBB
movzwl 2(rPC),%eax # eax<- AAAA
GET_VREG_WORD(rINST_FULL,%ecx,0) # rINST_WORD<- v[BBBB+0]
GET_VREG_WORD(%ecx,%ecx,1) # ecx<- v[BBBB+1]
SET_VREG_WORD(rINST_FULL,%eax,0) # v[AAAA+0]<- rINST_FULL
FETCH_INST_WORD(3)
ADVANCE_PC(3)
SET_VREG_WORD(%ecx,%eax,1) # v[AAAA+1]<- ecx
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_OBJECT: /* 0x07 */
/* File: x86/OP_MOVE_OBJECT.S */
/* File: x86/OP_MOVE.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
movzbl rINST_HI,%eax # eax<- BA
andb $0xf,%al # eax<- A
shrl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
SET_VREG(%ecx,%eax) # fp[A]<-fp[B]
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_OBJECT_FROM16: /* 0x08 */
/* File: x86/OP_MOVE_OBJECT_FROM16.S */
/* File: x86/OP_MOVE_FROM16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
movzx rINST_HI,%eax # eax <= AA
movw 2(rPC),rINST # rINST <= BBBB
GET_VREG (%ecx,rINST_FULL) # ecx<- fp[BBBB]
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG (%ecx,%eax) # fp[AA]<- ecx]
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_OBJECT_16: /* 0x09 */
/* File: x86/OP_MOVE_OBJECT_16.S */
/* File: x86/OP_MOVE_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
movzwl 4(rPC),%ecx # ecx<- BBBB
movzwl 2(rPC),%eax # eax<- AAAA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(3)
ADVANCE_PC(3)
SET_VREG(%ecx,%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_RESULT: /* 0x0a */
/* File: x86/OP_MOVE_RESULT.S */
/* for: move-result, move-result-object */
/* op vAA */
GET_GLUE(%eax) # eax<- rGLUE
movzx rINST_HI,%ecx # ecx<- AA
movl offGlue_retval(%eax),%eax # eax<- glue->retval.l
FETCH_INST_WORD(1)
ADVANCE_PC(1)
SET_VREG (%eax,%ecx) # fp[AA]<- retval.l
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_RESULT_WIDE: /* 0x0b */
/* File: x86/OP_MOVE_RESULT_WIDE.S */
/* move-result-wide vAA */
GET_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl offGlue_retval(%ecx),%eax
movl 4+offGlue_retval(%ecx),%ecx
SET_VREG_WORD(%eax,rINST_FULL,0) # v[AA+0] <- eax
SET_VREG_WORD(%ecx,rINST_FULL,1) # v[AA+1] <- ecx
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_RESULT_OBJECT: /* 0x0c */
/* File: x86/OP_MOVE_RESULT_OBJECT.S */
/* File: x86/OP_MOVE_RESULT.S */
/* for: move-result, move-result-object */
/* op vAA */
GET_GLUE(%eax) # eax<- rGLUE
movzx rINST_HI,%ecx # ecx<- AA
movl offGlue_retval(%eax),%eax # eax<- glue->retval.l
FETCH_INST_WORD(1)
ADVANCE_PC(1)
SET_VREG (%eax,%ecx) # fp[AA]<- retval.l
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MOVE_EXCEPTION: /* 0x0d */
/* File: x86/OP_MOVE_EXCEPTION.S */
/* move-exception vAA */
GET_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl offGlue_self(%ecx),%ecx # ecx<- glue->self
movl offThread_exception(%ecx),%eax # eax<- dvmGetException bypass
SET_VREG(%eax,rINST_FULL) # fp[AA]<- exception object
FETCH_INST_WORD(1)
ADVANCE_PC(1)
movl $0,offThread_exception(%ecx) # dvmClearException bypass
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_RETURN_VOID: /* 0x0e */
/* File: x86/OP_RETURN_VOID.S */
jmp common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_RETURN: /* 0x0f */
/* File: x86/OP_RETURN.S */
/*
* Return a 32-bit value. Copies the return value into the "glue"
* structure, then jumps to the return handler.
*
* for: return, return-object
*/
/* op vAA */
GET_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,rINST_FULL) # eax<- vAA
movl %eax,offGlue_retval(%ecx) # retval.i <- AA
jmp common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_RETURN_WIDE: /* 0x10 */
/* File: x86/OP_RETURN_WIDE.S */
/*
* Return a 64-bit value. Copies the return value into the "glue"
* structure, then jumps to the return handler.
*/
/* return-wide vAA */
GET_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG_WORD(%eax,rINST_FULL,0) # eax<- v[AA+0]
GET_VREG_WORD(rINST_FULL,rINST_FULL,1) # rINST_FULL<- v[AA+1]
movl %eax,offGlue_retval(%ecx)
movl rINST_FULL,4+offGlue_retval(%ecx)
jmp common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_RETURN_OBJECT: /* 0x11 */
/* File: x86/OP_RETURN_OBJECT.S */
/* File: x86/OP_RETURN.S */
/*
* Return a 32-bit value. Copies the return value into the "glue"
* structure, then jumps to the return handler.
*
* for: return, return-object
*/
/* op vAA */
GET_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,rINST_FULL) # eax<- vAA
movl %eax,offGlue_retval(%ecx) # retval.i <- AA
jmp common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_CONST_4: /* 0x12 */
/* File: x86/OP_CONST_4.S */
/* const/4 vA, #+B */
movsx rINST_HI,%eax # eax<-ssssssBx
movl $0xf,%ecx
andl %eax,%ecx # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
sarl $4,%eax
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_16: /* 0x13 */
/* File: x86/OP_CONST_16.S */
/* const/16 vAA, #+BBBB */
movswl 2(rPC),%ecx # ecx<- ssssBBBB
movzx rINST_HI,%eax # eax<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%ecx,%eax) # vAA<- ssssBBBB
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST: /* 0x14 */
/* File: x86/OP_CONST.S */
/* const vAA, #+BBBBbbbb */
movzbl rINST_HI,%ecx # ecx<- AA
movl 2(rPC),%eax # grab all 32 bits at once
FETCH_INST_WORD(3)
ADVANCE_PC(3)
SET_VREG(%eax,%ecx) # vAA<- eax
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_HIGH16: /* 0x15 */
/* File: x86/OP_CONST_HIGH16.S */
/* const/high16 vAA, #+BBBB0000 */
movzwl 2(rPC),%eax # eax<- 0000BBBB
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
sall $16,%eax # eax<- BBBB0000
SET_VREG(%eax,%ecx) # vAA<- eax
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE_16: /* 0x16 */
/* File: x86/OP_CONST_WIDE_16.S */
/* const-wide/16 vAA, #+BBBB */
movswl 2(rPC),%eax # eax<- ssssBBBB
SPILL(rPC)
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
cltd # rPC:eax<- ssssssssssssBBBB
SET_VREG_WORD(rPC,%ecx,1) # store msw
UNSPILL(rPC)
SET_VREG_WORD(%eax,%ecx,0) # store lsw
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE_32: /* 0x17 */
/* File: x86/OP_CONST_WIDE_32.S */
/* const-wide/32 vAA, #+BBBBbbbb */
movl 2(rPC),%eax # eax<- BBBBbbbb
SPILL(rPC)
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(3)
cltd # rPC:eax<- ssssssssssssBBBB
SET_VREG_WORD(rPC,%ecx,1) # store msw
UNSPILL(rPC)
SET_VREG_WORD(%eax,%ecx,0) # store lsw
ADVANCE_PC(3)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE: /* 0x18 */
/* File: x86/OP_CONST_WIDE.S */
/* const-wide vAA, #+HHHHhhhhBBBBbbbb */
movl 2(rPC),%eax # eax<- lsw
movzbl rINST_HI,%ecx # ecx <- AA
movl 6(rPC),rINST_FULL # rINST_FULL<- msw
leal (rFP,%ecx,4),%ecx # dst addr
movl rINST_FULL,4(%ecx)
FETCH_INST_WORD(5)
movl %eax,(%ecx)
ADVANCE_PC(5)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE_HIGH16: /* 0x19 */
/* File: x86/OP_CONST_WIDE_HIGH16.S */
/* const-wide/high16 vAA, #+BBBB000000000000 */
movzwl 2(rPC),%eax # eax<- 0000BBBB
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
sall $16,%eax # eax<- BBBB0000
SET_VREG_WORD(%eax,%ecx,1) # v[AA+1]<- eax
xorl %eax,%eax
SET_VREG_WORD(%eax,%ecx,0) # v[AA+0]<- eax
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_STRING: /* 0x1a */
/* File: x86/OP_CONST_STRING.S */
/* const/string vAA, String@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx# ecx<- glue->methodClassDex
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl offDvmDex_pResStrings(%ecx),%ecx # ecx<- dvmDex->pResStrings
movl (%ecx,%eax,4),%eax # eax<- rResString[BBBB]
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
testl %eax,%eax # resolved yet?
je .LOP_CONST_STRING_resolve
SET_VREG(%eax,%ecx) # vAA<- rResString[BBBB]
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_STRING_JUMBO: /* 0x1b */
/* File: x86/OP_CONST_STRING_JUMBO.S */
/* const/string vAA, String@BBBBBBBB */
GET_GLUE(%ecx)
movl 2(rPC),%eax # eax<- BBBBBBBB
movl offGlue_methodClassDex(%ecx),%ecx# ecx<- glue->methodClassDex
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl offDvmDex_pResStrings(%ecx),%ecx # ecx<- dvmDex->pResStrings
movl (%ecx,%eax,4),%eax # eax<- rResString[BBBB]
movl rINST_FULL,%ecx
FETCH_INST_WORD(3)
testl %eax,%eax # resolved yet?
je .LOP_CONST_STRING_JUMBO_resolve
SET_VREG(%eax,%ecx) # vAA<- rResString[BBBB]
ADVANCE_PC(3)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CONST_CLASS: /* 0x1c */
/* File: x86/OP_CONST_CLASS.S */
/* const/class vAA, Class@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx# ecx<- glue->methodClassDex
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl offDvmDex_pResClasses(%ecx),%ecx # ecx<- dvmDex->pResClasses
movl (%ecx,%eax,4),%eax # eax<- rResClasses[BBBB]
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
testl %eax,%eax # resolved yet?
je .LOP_CONST_CLASS_resolve
SET_VREG(%eax,%ecx) # vAA<- rResClasses[BBBB]
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MONITOR_ENTER: /* 0x1d */
/* File: x86/OP_MONITOR_ENTER.S */
/*
* Synchronize on an object.
*/
/* monitor-enter vAA */
GET_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,rINST_FULL) # eax<- vAA
movl offGlue_self(%ecx),%ecx # ecx<- glue->self
FETCH_INST_WORD(1)
testl %eax,%eax # null object?
EXPORT_PC() # need for precise GC, MONITOR_TRACKING
jne .LOP_MONITOR_ENTER_continue
jmp common_errNullObject
/* ------------------------------ */
.balign 64
.L_OP_MONITOR_EXIT: /* 0x1e */
/* File: x86/OP_MONITOR_EXIT.S */
/*
* Unlock an object.
*
* Exceptions that occur when unlocking a monitor need to appear as
* if they happened at the following instruction. See the Dalvik
* instruction spec.
*/
/* monitor-exit vAA */
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,rINST_FULL)
GET_GLUE(%ecx)
EXPORT_PC()
testl %eax,%eax # null object?
je .LOP_MONITOR_EXIT_errNullObject # go if so
movl offGlue_self(%ecx),%ecx # ecx<- glue->self
movl %eax,OUT_ARG1(%esp)
SPILL(rPC)
movl %ecx,OUT_ARG0(%esp)
jmp .LOP_MONITOR_EXIT_continue
/* ------------------------------ */
.balign 64
.L_OP_CHECK_CAST: /* 0x1f */
/* File: x86/OP_CHECK_CAST.S */
/*
* Check to see if a cast from one class to another is allowed.
*/
/* check-cast vAA, class@BBBB */
GET_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- vAA (object)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
testl rINST_FULL,rINST_FULL # is oject null?
movl offDvmDex_pResClasses(%ecx),%ecx # ecx<- pDvmDex->pResClasses
je .LOP_CHECK_CAST_okay # null obj, cast always succeeds
movl (%ecx,%eax,4),%eax # eax<- resolved class
movl offObject_clazz(rINST_FULL),%ecx # ecx<- obj->clazz
testl %eax,%eax # have we resolved this before?
je .LOP_CHECK_CAST_resolve # no, go do it now
.LOP_CHECK_CAST_resolved:
cmpl %eax,%ecx # same class (trivial success)?
jne .LOP_CHECK_CAST_fullcheck # no, do full check
.LOP_CHECK_CAST_okay:
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INSTANCE_OF: /* 0x20 */
/* File: x86/OP_INSTANCE_OF.S */
/*
* Check to see if an object reference is an instance of a class.
*
* Most common situation is a non-null object, being compared against
* an already-resolved class.
*/
/* instance-of vA, vB, class@CCCC */
movzbl rINST_HI,%eax # eax<- BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB (obj)
GET_GLUE(%ecx)
testl %eax,%eax # object null?
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
SPILL(rPC)
je .LOP_INSTANCE_OF_store # null obj, not instance, store it
movzwl 2(rPC),rPC # rPC<- CCCC
movl offDvmDex_pResClasses(%ecx),%ecx # ecx<- pDvmDex->pResClasses
movl (%ecx,rPC,4),%ecx # ecx<- resolved class
movl offObject_clazz(%eax),%eax # eax<- obj->clazz
testl %ecx,%ecx # have we resolved this before?
je .LOP_INSTANCE_OF_resolve # not resolved, do it now
.LOP_INSTANCE_OF_resolved: # eax<- obj->clazz, ecx<- resolved class
cmpl %eax,%ecx # same class (trivial success)?
je .LOP_INSTANCE_OF_trivial # yes, trivial finish
jmp .LOP_INSTANCE_OF_fullcheck # no, do full check
/* ------------------------------ */
.balign 64
.L_OP_ARRAY_LENGTH: /* 0x21 */
/* File: x86/OP_ARRAY_LENGTH.S */
/*
* Return the length of an array.
*/
movzbl rINST_HI,%eax # eax<- BA
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%ecx,rINST_FULL) # ecx<- vB (object ref)
andb $0xf,%al # eax<- A
testl %ecx,%ecx # is null?
je common_errNullObject
FETCH_INST_WORD(1)
movl offArrayObject_length(%ecx),%ecx
ADVANCE_PC(1)
SET_VREG(%ecx,%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_NEW_INSTANCE: /* 0x22 */
/* File: x86/OP_NEW_INSTANCE.S */
/*
* Create a new instance of a class.
*/
/* new-instance vAA, class@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl offDvmDex_pResClasses(%ecx),%ecx # ecx<- pDvmDex->pResClasses
EXPORT_PC()
movl (%ecx,%eax,4),%ecx # ecx<- resolved class
SPILL(rPC)
testl %ecx,%ecx # resolved?
je .LOP_NEW_INSTANCE_resolve # no, go do it
.LOP_NEW_INSTANCE_resolved: # on entry, ecx<- class
cmpb $CLASS_INITIALIZED,offClassObject_status(%ecx)
je .LOP_NEW_INSTANCE_initialized
jmp .LOP_NEW_INSTANCE_needinit
/* ------------------------------ */
.balign 64
.L_OP_NEW_ARRAY: /* 0x23 */
/* File: x86/OP_NEW_ARRAY.S */
/*
* Allocate an array of objects, specified with the array class
* and a count.
*
* The verifier guarantees that this is an array class, so we don't
* check for it here.
*/
/* new-array vA, vB, class@CCCC */
GET_GLUE(%ecx)
EXPORT_PC()
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
movzwl 2(rPC),%eax # eax<- CCCC
movl offDvmDex_pResClasses(%ecx),%ecx # ecx<- pDvmDex->pResClasses
movl (%ecx,%eax,4),%ecx # ecx<- resolved class
movzbl rINST_HI,%eax
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB (array length)
movzbl rINST_HI,rINST_FULL
andb $0xf,rINST_LO # rINST_FULL<- A
testl %eax,%eax
js common_errNegativeArraySize # bail
testl %ecx,%ecx # already resolved?
jne .LOP_NEW_ARRAY_finish # yes, fast path
jmp .LOP_NEW_ARRAY_resolve # resolve now
/* ------------------------------ */
.balign 64
.L_OP_FILLED_NEW_ARRAY: /* 0x24 */
/* File: x86/OP_FILLED_NEW_ARRAY.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
GET_GLUE(%eax)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA or BA
movl offGlue_methodClassDex(%eax),%eax # eax<- pDvmDex
movzwl 2(rPC),%ecx # ecx<- BBBB
movl offDvmDex_pResClasses(%eax),%eax # eax<- pDvmDex->pResClasses
SPILL(rPC)
movl (%eax,%ecx,4),%eax # eax<- resolved class
EXPORT_PC()
testl %eax,%eax # already resolved?
jne .LOP_FILLED_NEW_ARRAY_continue # yes, continue
# less frequent path, so we'll redo some work
GET_GLUE(%eax)
movl $0,OUT_ARG2(%esp) # arg2<- false
movl %ecx,OUT_ARG1(%esp) # arg1<- BBBB
movl offGlue_method(%eax),%eax # eax<- glue->method
jmp .LOP_FILLED_NEW_ARRAY_more
/* ------------------------------ */
.balign 64
.L_OP_FILLED_NEW_ARRAY_RANGE: /* 0x25 */
/* File: x86/OP_FILLED_NEW_ARRAY_RANGE.S */
/* File: x86/OP_FILLED_NEW_ARRAY.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
GET_GLUE(%eax)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA or BA
movl offGlue_methodClassDex(%eax),%eax # eax<- pDvmDex
movzwl 2(rPC),%ecx # ecx<- BBBB
movl offDvmDex_pResClasses(%eax),%eax # eax<- pDvmDex->pResClasses
SPILL(rPC)
movl (%eax,%ecx,4),%eax # eax<- resolved class
EXPORT_PC()
testl %eax,%eax # already resolved?
jne .LOP_FILLED_NEW_ARRAY_RANGE_continue # yes, continue
# less frequent path, so we'll redo some work
GET_GLUE(%eax)
movl $0,OUT_ARG2(%esp) # arg2<- false
movl %ecx,OUT_ARG1(%esp) # arg1<- BBBB
movl offGlue_method(%eax),%eax # eax<- glue->method
jmp .LOP_FILLED_NEW_ARRAY_RANGE_more
/* ------------------------------ */
.balign 64
.L_OP_FILL_ARRAY_DATA: /* 0x26 */
/* File: x86/OP_FILL_ARRAY_DATA.S */
/* fill-array-data vAA, +BBBBBBBB */
movl 2(rPC),%ecx # ecx<- BBBBbbbb
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
leal (rPC,%ecx,2),%ecx # ecx<- PC + BBBBbbbb*2
GET_VREG(%eax,rINST_FULL)
SPILL(rPC)
EXPORT_PC()
movl %eax,OUT_ARG0(%esp)
movl %ecx,OUT_ARG1(%esp)
call dvmInterpHandleFillArrayData
UNSPILL(rPC)
FETCH_INST_WORD(3)
testl %eax,%eax # exception thrown?
je common_exceptionThrown
ADVANCE_PC(3)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_THROW: /* 0x27 */
/* File: x86/OP_THROW.S */
/*
* Throw an exception object in the current thread.
*/
/* throw vAA */
GET_GLUE(%ecx)
EXPORT_PC()
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,rINST_FULL) # eax<- exception object
movl offGlue_self(%ecx),%ecx # ecx<- glue->self
testl %eax,%eax # null object?
je common_errNullObject
movl %eax,offThread_exception(%ecx) # thread->exception<- obj
jmp common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_GOTO: /* 0x28 */
/* File: x86/OP_GOTO.S */
/*
* Unconditional branch, 8-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto +AA */
movsbl rINST_HI,rINST_FULL # ebx<- ssssssAA
testl rINST_FULL,rINST_FULL # test for <0
js common_backwardBranch
movl rINST_FULL,%eax
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_GOTO_16: /* 0x29 */
/* File: x86/OP_GOTO_16.S */
/*
* Unconditional branch, 16-bit offset.
*
* The branch distance is a signed code-unit offset
*/
/* goto/16 +AAAA */
movswl 2(rPC),rINST_FULL # rINST_FULL<- ssssAAAA
testl rINST_FULL,rINST_FULL # test for <0
js common_backwardBranch
movl rINST_FULL,%eax
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_GOTO_32: /* 0x2a */
/* File: x86/OP_GOTO_32.S */
/*
* Unconditional branch, 32-bit offset.
*
* The branch distance is a signed code-unit offset.
*
* Unlike most opcodes, this one is allowed to branch to itself, so
* our "backward branch" test must be "<=0" instead of "<0".
*/
/* goto/32 AAAAAAAA */
movl 2(rPC),rINST_FULL # rINST_FULL<- AAAAAAAA
cmpl $0,rINST_FULL # test for <= 0
jle common_backwardBranch
movl rINST_FULL,%eax
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_PACKED_SWITCH: /* 0x2b */
/* File: x86/OP_PACKED_SWITCH.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl 2(rPC),%ecx # ecx<- BBBBbbbb
GET_VREG(%eax,rINST_FULL) # eax<- vAA
leal (rPC,%ecx,2),%ecx # ecx<- PC + BBBBbbbb*2
movl %eax,OUT_ARG1(%esp) # ARG1<- vAA
movl %ecx,OUT_ARG0(%esp) # ARG0<- switchData
SPILL(rPC)
call dvmInterpHandlePackedSwitch
UNSPILL(rPC)
testl %eax,%eax
movl %eax,rINST_FULL # set up word offset
jle common_backwardBranch # check on special actions
ADVANCE_PC_INDEXED(rINST_FULL)
FETCH_INST()
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPARSE_SWITCH: /* 0x2c */
/* File: x86/OP_SPARSE_SWITCH.S */
/* File: x86/OP_PACKED_SWITCH.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl 2(rPC),%ecx # ecx<- BBBBbbbb
GET_VREG(%eax,rINST_FULL) # eax<- vAA
leal (rPC,%ecx,2),%ecx # ecx<- PC + BBBBbbbb*2
movl %eax,OUT_ARG1(%esp) # ARG1<- vAA
movl %ecx,OUT_ARG0(%esp) # ARG0<- switchData
SPILL(rPC)
call dvmInterpHandleSparseSwitch
UNSPILL(rPC)
testl %eax,%eax
movl %eax,rINST_FULL # set up word offset
jle common_backwardBranch # check on special actions
ADVANCE_PC_INDEXED(rINST_FULL)
FETCH_INST()
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CMPL_FLOAT: /* 0x2d */
/* File: x86/OP_CMPL_FLOAT.S */
/* File: x86/OP_CMPG_DOUBLE.S */
/* float/double_cmp[gl] vAA, vBB, vCC */
movzbl 3(rPC),%eax # eax<- CC
movzbl 2(rPC),%ecx # ecx<- BB
.if 0
fldl (rFP,%eax,4)
fldl (rFP,%ecx,4)
.else
flds (rFP,%eax,4)
flds (rFP,%ecx,4)
.endif
movzbl rINST_HI,rINST_FULL
xorl %ecx,%ecx
fucompp # z if equal, p set if NaN, c set if st0 < st1
fnstsw %ax
sahf
movl rINST_FULL,%eax
FETCH_INST_WORD(2)
jp .LOP_CMPL_FLOAT_isNaN
je .LOP_CMPL_FLOAT_finish
sbbl %ecx,%ecx
jb .LOP_CMPL_FLOAT_finish
incl %ecx
.LOP_CMPL_FLOAT_finish:
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CMPG_FLOAT: /* 0x2e */
/* File: x86/OP_CMPG_FLOAT.S */
/* File: x86/OP_CMPG_DOUBLE.S */
/* float/double_cmp[gl] vAA, vBB, vCC */
movzbl 3(rPC),%eax # eax<- CC
movzbl 2(rPC),%ecx # ecx<- BB
.if 0
fldl (rFP,%eax,4)
fldl (rFP,%ecx,4)
.else
flds (rFP,%eax,4)
flds (rFP,%ecx,4)
.endif
movzbl rINST_HI,rINST_FULL
xorl %ecx,%ecx
fucompp # z if equal, p set if NaN, c set if st0 < st1
fnstsw %ax
sahf
movl rINST_FULL,%eax
FETCH_INST_WORD(2)
jp .LOP_CMPG_FLOAT_isNaN
je .LOP_CMPG_FLOAT_finish
sbbl %ecx,%ecx
jb .LOP_CMPG_FLOAT_finish
incl %ecx
.LOP_CMPG_FLOAT_finish:
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CMPL_DOUBLE: /* 0x2f */
/* File: x86/OP_CMPL_DOUBLE.S */
/* File: x86/OP_CMPG_DOUBLE.S */
/* float/double_cmp[gl] vAA, vBB, vCC */
movzbl 3(rPC),%eax # eax<- CC
movzbl 2(rPC),%ecx # ecx<- BB
.if 1
fldl (rFP,%eax,4)
fldl (rFP,%ecx,4)
.else
flds (rFP,%eax,4)
flds (rFP,%ecx,4)
.endif
movzbl rINST_HI,rINST_FULL
xorl %ecx,%ecx
fucompp # z if equal, p set if NaN, c set if st0 < st1
fnstsw %ax
sahf
movl rINST_FULL,%eax
FETCH_INST_WORD(2)
jp .LOP_CMPL_DOUBLE_isNaN
je .LOP_CMPL_DOUBLE_finish
sbbl %ecx,%ecx
jb .LOP_CMPL_DOUBLE_finish
incl %ecx
.LOP_CMPL_DOUBLE_finish:
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CMPG_DOUBLE: /* 0x30 */
/* File: x86/OP_CMPG_DOUBLE.S */
/* float/double_cmp[gl] vAA, vBB, vCC */
movzbl 3(rPC),%eax # eax<- CC
movzbl 2(rPC),%ecx # ecx<- BB
.if 1
fldl (rFP,%eax,4)
fldl (rFP,%ecx,4)
.else
flds (rFP,%eax,4)
flds (rFP,%ecx,4)
.endif
movzbl rINST_HI,rINST_FULL
xorl %ecx,%ecx
fucompp # z if equal, p set if NaN, c set if st0 < st1
fnstsw %ax
sahf
movl rINST_FULL,%eax
FETCH_INST_WORD(2)
jp .LOP_CMPG_DOUBLE_isNaN
je .LOP_CMPG_DOUBLE_finish
sbbl %ecx,%ecx
jb .LOP_CMPG_DOUBLE_finish
incl %ecx
.LOP_CMPG_DOUBLE_finish:
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_CMP_LONG: /* 0x31 */
/* File: x86/OP_CMP_LONG.S */
/*
* Compare two 64-bit values. Puts 0, 1, or -1 into the destination
* register based on the results of the comparison.
*/
/* cmp-long vAA, vBB, vCC */
movzbl 2(rPC),%ecx # ecx<- BB
SPILL(rPC)
movzbl 3(rPC),rPC # rPC<- CC
GET_VREG_WORD(%eax,%ecx,1) # eax<- v[BB+1]
GET_VREG_WORD(%ecx,%ecx,0) # ecx<- v[BB+0]
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
cmpl 4(rFP,rPC,4),%eax
jl .LOP_CMP_LONG_smaller
jg .LOP_CMP_LONG_bigger
sub (rFP,rPC,4),%ecx
ja .LOP_CMP_LONG_bigger
jb .LOP_CMP_LONG_smaller
UNSPILL(rPC)
jmp .LOP_CMP_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_IF_EQ: /* 0x32 */
/* File: x86/OP_IF_EQ.S */
/* File: x86/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movzx rINST_HI,%ecx # ecx <- A+
andb $0xf,%cl # ecx <- A
GET_VREG(%eax,%ecx) # eax <- vA
sarl $12,rINST_FULL # rINST_FULL<- B
cmpl (rFP,rINST_FULL,4),%eax # compare (vA, vB)
movswl 2(rPC),rINST_FULL # Get signed branch offset
movl $2,%eax # assume not taken
jne 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_NE: /* 0x33 */
/* File: x86/OP_IF_NE.S */
/* File: x86/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movzx rINST_HI,%ecx # ecx <- A+
andb $0xf,%cl # ecx <- A
GET_VREG(%eax,%ecx) # eax <- vA
sarl $12,rINST_FULL # rINST_FULL<- B
cmpl (rFP,rINST_FULL,4),%eax # compare (vA, vB)
movswl 2(rPC),rINST_FULL # Get signed branch offset
movl $2,%eax # assume not taken
je 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_LT: /* 0x34 */
/* File: x86/OP_IF_LT.S */
/* File: x86/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movzx rINST_HI,%ecx # ecx <- A+
andb $0xf,%cl # ecx <- A
GET_VREG(%eax,%ecx) # eax <- vA
sarl $12,rINST_FULL # rINST_FULL<- B
cmpl (rFP,rINST_FULL,4),%eax # compare (vA, vB)
movswl 2(rPC),rINST_FULL # Get signed branch offset
movl $2,%eax # assume not taken
jge 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_GE: /* 0x35 */
/* File: x86/OP_IF_GE.S */
/* File: x86/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movzx rINST_HI,%ecx # ecx <- A+
andb $0xf,%cl # ecx <- A
GET_VREG(%eax,%ecx) # eax <- vA
sarl $12,rINST_FULL # rINST_FULL<- B
cmpl (rFP,rINST_FULL,4),%eax # compare (vA, vB)
movswl 2(rPC),rINST_FULL # Get signed branch offset
movl $2,%eax # assume not taken
jl 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_GT: /* 0x36 */
/* File: x86/OP_IF_GT.S */
/* File: x86/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movzx rINST_HI,%ecx # ecx <- A+
andb $0xf,%cl # ecx <- A
GET_VREG(%eax,%ecx) # eax <- vA
sarl $12,rINST_FULL # rINST_FULL<- B
cmpl (rFP,rINST_FULL,4),%eax # compare (vA, vB)
movswl 2(rPC),rINST_FULL # Get signed branch offset
movl $2,%eax # assume not taken
jle 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_LE: /* 0x37 */
/* File: x86/OP_IF_LE.S */
/* File: x86/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movzx rINST_HI,%ecx # ecx <- A+
andb $0xf,%cl # ecx <- A
GET_VREG(%eax,%ecx) # eax <- vA
sarl $12,rINST_FULL # rINST_FULL<- B
cmpl (rFP,rINST_FULL,4),%eax # compare (vA, vB)
movswl 2(rPC),rINST_FULL # Get signed branch offset
movl $2,%eax # assume not taken
jg 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_EQZ: /* 0x38 */
/* File: x86/OP_IF_EQZ.S */
/* File: x86/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
movzx rINST_HI,%ecx # ecx <- AA
cmpl $0,(rFP,%ecx,4) # compare (vA, 0)
movswl 2(rPC),rINST_FULL # fetch signed displacement
movl $2,%eax # assume branch not taken
jne 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_NEZ: /* 0x39 */
/* File: x86/OP_IF_NEZ.S */
/* File: x86/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
movzx rINST_HI,%ecx # ecx <- AA
cmpl $0,(rFP,%ecx,4) # compare (vA, 0)
movswl 2(rPC),rINST_FULL # fetch signed displacement
movl $2,%eax # assume branch not taken
je 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_LTZ: /* 0x3a */
/* File: x86/OP_IF_LTZ.S */
/* File: x86/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
movzx rINST_HI,%ecx # ecx <- AA
cmpl $0,(rFP,%ecx,4) # compare (vA, 0)
movswl 2(rPC),rINST_FULL # fetch signed displacement
movl $2,%eax # assume branch not taken
jge 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_GEZ: /* 0x3b */
/* File: x86/OP_IF_GEZ.S */
/* File: x86/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
movzx rINST_HI,%ecx # ecx <- AA
cmpl $0,(rFP,%ecx,4) # compare (vA, 0)
movswl 2(rPC),rINST_FULL # fetch signed displacement
movl $2,%eax # assume branch not taken
jl 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_GTZ: /* 0x3c */
/* File: x86/OP_IF_GTZ.S */
/* File: x86/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
movzx rINST_HI,%ecx # ecx <- AA
cmpl $0,(rFP,%ecx,4) # compare (vA, 0)
movswl 2(rPC),rINST_FULL # fetch signed displacement
movl $2,%eax # assume branch not taken
jle 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IF_LEZ: /* 0x3d */
/* File: x86/OP_IF_LEZ.S */
/* File: x86/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
movzx rINST_HI,%ecx # ecx <- AA
cmpl $0,(rFP,%ecx,4) # compare (vA, 0)
movswl 2(rPC),rINST_FULL # fetch signed displacement
movl $2,%eax # assume branch not taken
jg 1f
testl rINST_FULL,rINST_FULL
js common_backwardBranch
movl rINST_FULL,%eax
1:
FETCH_INST_INDEXED(%eax)
ADVANCE_PC_INDEXED(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_3E: /* 0x3e */
/* File: x86/OP_UNUSED_3E.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_3F: /* 0x3f */
/* File: x86/OP_UNUSED_3F.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_40: /* 0x40 */
/* File: x86/OP_UNUSED_40.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_41: /* 0x41 */
/* File: x86/OP_UNUSED_41.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_42: /* 0x42 */
/* File: x86/OP_UNUSED_42.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_43: /* 0x43 */
/* File: x86/OP_UNUSED_43.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_AGET: /* 0x44 */
/* File: x86/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
movl offArrayObject_contents(%eax,%ecx,4),%eax
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_AGET_WIDE: /* 0x45 */
/* File: x86/OP_AGET_WIDE.S */
/*
* Array get, 64 bits. vAA <- vBB[vCC].
*
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jb .LOP_AGET_WIDE_finish # index < length, OK
jmp common_errArrayIndex # index >= length, bail
/* ------------------------------ */
.balign 64
.L_OP_AGET_OBJECT: /* 0x46 */
/* File: x86/OP_AGET_OBJECT.S */
/* File: x86/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
movl offArrayObject_contents(%eax,%ecx,4),%eax
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_AGET_BOOLEAN: /* 0x47 */
/* File: x86/OP_AGET_BOOLEAN.S */
/* File: x86/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
movzbl offArrayObject_contents(%eax,%ecx,1),%eax
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_AGET_BYTE: /* 0x48 */
/* File: x86/OP_AGET_BYTE.S */
/* File: x86/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
movsbl offArrayObject_contents(%eax,%ecx,1),%eax
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_AGET_CHAR: /* 0x49 */
/* File: x86/OP_AGET_CHAR.S */
/* File: x86/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
movzwl offArrayObject_contents(%eax,%ecx,2),%eax
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_AGET_SHORT: /* 0x4a */
/* File: x86/OP_AGET_SHORT.S */
/* File: x86/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
movswl offArrayObject_contents(%eax,%ecx,2),%eax
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_APUT: /* 0x4b */
/* File: x86/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA
*
* for: aput, aput-object, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
leal offArrayObject_contents(%eax,%ecx,4),%eax
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(2)
movl %ecx,(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_APUT_WIDE: /* 0x4c */
/* File: x86/OP_APUT_WIDE.S */
/*
* Array put, 64 bits. vBB[vCC]<-vAA.
*
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jb .LOP_APUT_WIDE_finish # index < length, OK
jmp common_errArrayIndex # index >= length, bail
/* ------------------------------ */
.balign 64
.L_OP_APUT_OBJECT: /* 0x4d */
/* File: x86/OP_APUT_OBJECT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA
*
* for: aput, aput-object, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- vAA
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jb .LOP_APUT_OBJECT_continue
jmp common_errArrayIndex # index >= length, bail
/* ------------------------------ */
.balign 64
.L_OP_APUT_BOOLEAN: /* 0x4e */
/* File: x86/OP_APUT_BOOLEAN.S */
/* File: x86/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA
*
* for: aput, aput-object, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
leal offArrayObject_contents(%eax,%ecx,1),%eax
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(2)
movb %cl,(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_APUT_BYTE: /* 0x4f */
/* File: x86/OP_APUT_BYTE.S */
/* File: x86/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA
*
* for: aput, aput-object, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
leal offArrayObject_contents(%eax,%ecx,1),%eax
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(2)
movb %cl,(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_APUT_CHAR: /* 0x50 */
/* File: x86/OP_APUT_CHAR.S */
/* File: x86/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA
*
* for: aput, aput-object, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
leal offArrayObject_contents(%eax,%ecx,2),%eax
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(2)
movw %cx,(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_APUT_SHORT: /* 0x51 */
/* File: x86/OP_APUT_SHORT.S */
/* File: x86/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA
*
* for: aput, aput-object, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG(%eax,%eax) # eax<- vBB (array object)
GET_VREG(%ecx,%ecx) # ecs<- vCC (requested index)
testl %eax,%eax # null array object?
je common_errNullObject # bail if so
cmpl offArrayObject_length(%eax),%ecx
jae common_errArrayIndex # index >= length, bail
leal offArrayObject_contents(%eax,%ecx,2),%eax
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(2)
movw %cx,(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IGET: /* 0x52 */
/* File: x86/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IGET_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp) # needed by dvmResolveInstField
GET_GLUE(rIBASE)
jmp .LOP_IGET_resolve
/* ------------------------------ */
.balign 64
.L_OP_IGET_WIDE: /* 0x53 */
/* File: x86/OP_IGET_WIDE.S */
/*
* 64-bit instance field get.
*
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IGET_WIDE_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp) # needed by dvmResolveInstField
GET_GLUE(rIBASE)
jmp .LOP_IGET_WIDE_resolve
/* ------------------------------ */
.balign 64
.L_OP_IGET_OBJECT: /* 0x54 */
/* File: x86/OP_IGET_OBJECT.S */
/* File: x86/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IGET_OBJECT_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp) # needed by dvmResolveInstField
GET_GLUE(rIBASE)
jmp .LOP_IGET_OBJECT_resolve
/* ------------------------------ */
.balign 64
.L_OP_IGET_BOOLEAN: /* 0x55 */
/* File: x86/OP_IGET_BOOLEAN.S */
/* File: x86/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IGET_BOOLEAN_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp) # needed by dvmResolveInstField
GET_GLUE(rIBASE)
jmp .LOP_IGET_BOOLEAN_resolve
/* ------------------------------ */
.balign 64
.L_OP_IGET_BYTE: /* 0x56 */
/* File: x86/OP_IGET_BYTE.S */
/* File: x86/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IGET_BYTE_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp) # needed by dvmResolveInstField
GET_GLUE(rIBASE)
jmp .LOP_IGET_BYTE_resolve
/* ------------------------------ */
.balign 64
.L_OP_IGET_CHAR: /* 0x57 */
/* File: x86/OP_IGET_CHAR.S */
/* File: x86/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IGET_CHAR_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp) # needed by dvmResolveInstField
GET_GLUE(rIBASE)
jmp .LOP_IGET_CHAR_resolve
/* ------------------------------ */
.balign 64
.L_OP_IGET_SHORT: /* 0x58 */
/* File: x86/OP_IGET_SHORT.S */
/* File: x86/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IGET_SHORT_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp) # needed by dvmResolveInstField
GET_GLUE(rIBASE)
jmp .LOP_IGET_SHORT_resolve
/* ------------------------------ */
.balign 64
.L_OP_IPUT: /* 0x59 */
/* File: x86/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IPUT_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp)
GET_GLUE(rIBASE)
jmp .LOP_IPUT_resolve
/* ------------------------------ */
.balign 64
.L_OP_IPUT_WIDE: /* 0x5a */
/* File: x86/OP_IPUT_WIDE.S */
/*
* 64-bit instance field put.
*
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IPUT_WIDE_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp)
GET_GLUE(rIBASE)
jmp .LOP_IPUT_WIDE_resolve
/* ------------------------------ */
.balign 64
.L_OP_IPUT_OBJECT: /* 0x5b */
/* File: x86/OP_IPUT_OBJECT.S */
/* File: x86/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IPUT_OBJECT_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp)
GET_GLUE(rIBASE)
jmp .LOP_IPUT_OBJECT_resolve
/* ------------------------------ */
.balign 64
.L_OP_IPUT_BOOLEAN: /* 0x5c */
/* File: x86/OP_IPUT_BOOLEAN.S */
/* File: x86/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IPUT_BOOLEAN_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp)
GET_GLUE(rIBASE)
jmp .LOP_IPUT_BOOLEAN_resolve
/* ------------------------------ */
.balign 64
.L_OP_IPUT_BYTE: /* 0x5d */
/* File: x86/OP_IPUT_BYTE.S */
/* File: x86/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IPUT_BYTE_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp)
GET_GLUE(rIBASE)
jmp .LOP_IPUT_BYTE_resolve
/* ------------------------------ */
.balign 64
.L_OP_IPUT_CHAR: /* 0x5e */
/* File: x86/OP_IPUT_CHAR.S */
/* File: x86/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IPUT_CHAR_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp)
GET_GLUE(rIBASE)
jmp .LOP_IPUT_CHAR_resolve
/* ------------------------------ */
.balign 64
.L_OP_IPUT_SHORT: /* 0x5f */
/* File: x86/OP_IPUT_SHORT.S */
/* File: x86/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
GET_GLUE(%ecx)
SPILL(rIBASE) # need another reg
movzwl 2(rPC),rIBASE # rIBASE<- 0000CCCC
movl offGlue_methodClassDex(%ecx),%eax # eax<- DvmDex
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movl offDvmDex_pResFields(%eax),%eax # eax<- pDvmDex->pResFields
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%ecx,%ecx) # ecx<- fp[B], the object ptr
movl (%eax,rIBASE,4),%eax # resolved entry
testl %eax,%eax # is resolved entry null?
jne .LOP_IPUT_SHORT_finish # no, already resolved
movl rIBASE,OUT_ARG1(%esp)
GET_GLUE(rIBASE)
jmp .LOP_IPUT_SHORT_resolve
/* ------------------------------ */
.balign 64
.L_OP_SGET: /* 0x60 */
/* File: x86/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SGET_resolve # if not, make it so
.LOP_SGET_finish: # field ptr in eax
movl offStaticField_value(%eax),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SGET_WIDE: /* 0x61 */
/* File: x86/OP_SGET_WIDE.S */
/*
* 64-bit SGET handler.
*
*/
/* sget-wide vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SGET_WIDE_resolve # if not, make it so
.LOP_SGET_WIDE_finish: # field ptr in eax
movl offStaticField_value(%eax),%ecx # ecx<- lsw
movl 4+offStaticField_value(%eax),%eax # eax<- msw
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
SET_VREG_WORD(%ecx,rINST_FULL,0)
SET_VREG_WORD(%eax,rINST_FULL,1)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SGET_OBJECT: /* 0x62 */
/* File: x86/OP_SGET_OBJECT.S */
/* File: x86/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SGET_OBJECT_resolve # if not, make it so
.LOP_SGET_OBJECT_finish: # field ptr in eax
movl offStaticField_value(%eax),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SGET_BOOLEAN: /* 0x63 */
/* File: x86/OP_SGET_BOOLEAN.S */
/* File: x86/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SGET_BOOLEAN_resolve # if not, make it so
.LOP_SGET_BOOLEAN_finish: # field ptr in eax
movl offStaticField_value(%eax),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SGET_BYTE: /* 0x64 */
/* File: x86/OP_SGET_BYTE.S */
/* File: x86/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SGET_BYTE_resolve # if not, make it so
.LOP_SGET_BYTE_finish: # field ptr in eax
movl offStaticField_value(%eax),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SGET_CHAR: /* 0x65 */
/* File: x86/OP_SGET_CHAR.S */
/* File: x86/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SGET_CHAR_resolve # if not, make it so
.LOP_SGET_CHAR_finish: # field ptr in eax
movl offStaticField_value(%eax),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SGET_SHORT: /* 0x66 */
/* File: x86/OP_SGET_SHORT.S */
/* File: x86/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SGET_SHORT_resolve # if not, make it so
.LOP_SGET_SHORT_finish: # field ptr in eax
movl offStaticField_value(%eax),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT: /* 0x67 */
/* File: x86/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-object, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SPUT_resolve # if not, make it so
.LOP_SPUT_finish: # field ptr in eax
movzbl rINST_HI,%ecx # ecx<- AA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(2)
movl %ecx,offStaticField_value(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT_WIDE: /* 0x68 */
/* File: x86/OP_SPUT_WIDE.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-object, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SPUT_WIDE_resolve # if not, make it so
.LOP_SPUT_WIDE_finish: # field ptr in eax
movzbl rINST_HI,%ecx # ecx<- AA
GET_VREG_WORD(rINST_FULL,%ecx,0) # rINST_FULL<- lsw
GET_VREG_WORD(%ecx,%ecx,1) # ecx<- msw
movl rINST_FULL,offStaticField_value(%eax)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
movl %ecx,4+offStaticField_value(%eax)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT_OBJECT: /* 0x69 */
/* File: x86/OP_SPUT_OBJECT.S */
/* File: x86/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-object, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SPUT_OBJECT_resolve # if not, make it so
.LOP_SPUT_OBJECT_finish: # field ptr in eax
movzbl rINST_HI,%ecx # ecx<- AA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(2)
movl %ecx,offStaticField_value(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT_BOOLEAN: /* 0x6a */
/* File: x86/OP_SPUT_BOOLEAN.S */
/* File: x86/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-object, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SPUT_BOOLEAN_resolve # if not, make it so
.LOP_SPUT_BOOLEAN_finish: # field ptr in eax
movzbl rINST_HI,%ecx # ecx<- AA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(2)
movl %ecx,offStaticField_value(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT_BYTE: /* 0x6b */
/* File: x86/OP_SPUT_BYTE.S */
/* File: x86/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-object, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SPUT_BYTE_resolve # if not, make it so
.LOP_SPUT_BYTE_finish: # field ptr in eax
movzbl rINST_HI,%ecx # ecx<- AA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(2)
movl %ecx,offStaticField_value(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT_CHAR: /* 0x6c */
/* File: x86/OP_SPUT_CHAR.S */
/* File: x86/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-object, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SPUT_CHAR_resolve # if not, make it so
.LOP_SPUT_CHAR_finish: # field ptr in eax
movzbl rINST_HI,%ecx # ecx<- AA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(2)
movl %ecx,offStaticField_value(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT_SHORT: /* 0x6d */
/* File: x86/OP_SPUT_SHORT.S */
/* File: x86/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-object, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- DvmDex
movl offDvmDex_pResFields(%ecx),%ecx # ecx<- dvmDex->pResFields
movl (%ecx,%eax,4),%eax # eax<- resolved StaticField ptr
testl %eax,%eax # resolved entry null?
je .LOP_SPUT_SHORT_resolve # if not, make it so
.LOP_SPUT_SHORT_finish: # field ptr in eax
movzbl rINST_HI,%ecx # ecx<- AA
GET_VREG(%ecx,%ecx)
FETCH_INST_WORD(2)
movl %ecx,offStaticField_value(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL: /* 0x6e */
/* File: x86/OP_INVOKE_VIRTUAL.S */
/*
* Handle a virtual method call.
*
* for: invoke-virtual, invoke-virtual/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%eax)
movzwl 2(rPC),%ecx # ecx<- BBBB
movl offGlue_methodClassDex(%eax),%eax # eax<- pDvmDex
EXPORT_PC()
movl offDvmDex_pResMethods(%eax),%eax # eax<- pDvmDex->pResMethods
movl (%eax,%ecx,4),%eax # eax<- resolved baseMethod
testl %eax,%eax # already resolved?
jne .LOP_INVOKE_VIRTUAL_continue # yes, continue
GET_GLUE(%eax)
movl %ecx,OUT_ARG1(%esp) # arg1<- ref
movl offGlue_method(%eax),%eax # eax<- glue->method
SPILL(rPC)
jmp .LOP_INVOKE_VIRTUAL_more
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER: /* 0x6f */
/* File: x86/OP_INVOKE_SUPER.S */
/*
* Handle a "super" method call.
*
* for: invoke-super, invoke-super/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(rINST_FULL)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(rINST_FULL),%ecx # ecx<- pDvmDex
EXPORT_PC()
movl offDvmDex_pResMethods(%ecx),%ecx # ecx<- pDvmDex->pResMethods
movl (%ecx,%eax,4),%ecx # ecx<- resolved baseMethod
movl offGlue_method(rINST_FULL),%eax # eax<- method
movzwl 4(rPC),rINST_FULL # rINST_FULL<- GFED or CCCC
.if (!0)
andl $0xf,rINST_FULL # rINST_FULL<- D (or stays CCCC)
.endif
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- "this" ptr
testl rINST_FULL,rINST_FULL # null "this"?
je common_errNullObject # yes, throw
movl offMethod_clazz(%eax),%eax # eax<- method->clazz
testl %ecx,%ecx # already resolved?
jne .LOP_INVOKE_SUPER_continue # yes - go on
jmp .LOP_INVOKE_SUPER_resolve
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_DIRECT: /* 0x70 */
/* File: x86/OP_INVOKE_DIRECT.S */
/*
* Handle a direct method call.
*
* (We could defer the "is 'this' pointer null" test to the common
* method invocation code, and use a flag to indicate that static
* calls don't count. If we do this as part of copying the arguments
* out we could avoiding loading the first arg twice.)
*
* for: invoke-direct, invoke-direct/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
EXPORT_PC()
SPILL(rPC)
movl offDvmDex_pResMethods(%ecx),%ecx # ecx<- pDvmDex->pResMethods
movzwl 4(rPC),rPC # rPC<- GFED or CCCC
movl (%ecx,%eax,4),%eax # eax<- resolved methodToCall
.if (!0)
andl $0xf,rPC # rPC<- D (or stays CCCC)
.endif
testl %eax,%eax # already resolved?
GET_VREG(%ecx,rPC) # ecx<- "this" ptr
je .LOP_INVOKE_DIRECT_resolve # not resolved, do it now
.LOP_INVOKE_DIRECT_finish:
UNSPILL(rPC)
testl %ecx,%ecx # null "this"?
jne common_invokeMethodNoRange # no, continue on
jmp common_errNullObject
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_STATIC: /* 0x71 */
/* File: x86/OP_INVOKE_STATIC.S */
/*
* Handle a static method call.
*
* for: invoke-static, invoke-static/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
EXPORT_PC()
movl offDvmDex_pResMethods(%ecx),%ecx # ecx<- pDvmDex->pResMethods
movl (%ecx,%eax,4),%eax # eax<- resolved methodToCall
testl %eax,%eax
jne common_invokeMethodNoRange
GET_GLUE(%ecx)
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
movzwl 2(rPC),%eax
movl offMethod_clazz(%ecx),%ecx# ecx<- method->clazz
movl %eax,OUT_ARG1(%esp) # arg1<- BBBB
movl %ecx,OUT_ARG0(%esp) # arg0<- clazz
jmp .LOP_INVOKE_STATIC_continue
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_INTERFACE: /* 0x72 */
/* File: x86/OP_INVOKE_INTERFACE.S */
/*
* Handle an interface method call.
*
* for: invoke-interface, invoke-interface/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
movzwl 4(rPC),%eax # eax<- FEDC or CCCC
GET_GLUE(%ecx)
.if (!0)
andl $0xf,%eax # eax<- C (or stays CCCC)
.endif
GET_VREG(%eax,%eax) # eax<- "this"
EXPORT_PC()
testl %eax,%eax # null this?
je common_errNullObject # yes, fail
movl offObject_clazz(%eax),%eax# eax<- thisPtr->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- class
movl offGlue_methodClassDex(%ecx),%eax # eax<- methodClassDex
movl offGlue_method(%ecx),%ecx # ecx<- method
movl %eax,OUT_ARG3(%esp) # arg3<- dex
movzwl 2(rPC),%eax # eax<- BBBB
movl %ecx,OUT_ARG2(%esp) # arg2<- method
movl %eax,OUT_ARG1(%esp) # arg1<- BBBB
SPILL(rPC)
jmp .LOP_INVOKE_INTERFACE_continue
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_73: /* 0x73 */
/* File: x86/OP_UNUSED_73.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL_RANGE: /* 0x74 */
/* File: x86/OP_INVOKE_VIRTUAL_RANGE.S */
/* File: x86/OP_INVOKE_VIRTUAL.S */
/*
* Handle a virtual method call.
*
* for: invoke-virtual, invoke-virtual/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%eax)
movzwl 2(rPC),%ecx # ecx<- BBBB
movl offGlue_methodClassDex(%eax),%eax # eax<- pDvmDex
EXPORT_PC()
movl offDvmDex_pResMethods(%eax),%eax # eax<- pDvmDex->pResMethods
movl (%eax,%ecx,4),%eax # eax<- resolved baseMethod
testl %eax,%eax # already resolved?
jne .LOP_INVOKE_VIRTUAL_RANGE_continue # yes, continue
GET_GLUE(%eax)
movl %ecx,OUT_ARG1(%esp) # arg1<- ref
movl offGlue_method(%eax),%eax # eax<- glue->method
SPILL(rPC)
jmp .LOP_INVOKE_VIRTUAL_RANGE_more
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER_RANGE: /* 0x75 */
/* File: x86/OP_INVOKE_SUPER_RANGE.S */
/* File: x86/OP_INVOKE_SUPER.S */
/*
* Handle a "super" method call.
*
* for: invoke-super, invoke-super/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(rINST_FULL)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(rINST_FULL),%ecx # ecx<- pDvmDex
EXPORT_PC()
movl offDvmDex_pResMethods(%ecx),%ecx # ecx<- pDvmDex->pResMethods
movl (%ecx,%eax,4),%ecx # ecx<- resolved baseMethod
movl offGlue_method(rINST_FULL),%eax # eax<- method
movzwl 4(rPC),rINST_FULL # rINST_FULL<- GFED or CCCC
.if (!1)
andl $0xf,rINST_FULL # rINST_FULL<- D (or stays CCCC)
.endif
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- "this" ptr
testl rINST_FULL,rINST_FULL # null "this"?
je common_errNullObject # yes, throw
movl offMethod_clazz(%eax),%eax # eax<- method->clazz
testl %ecx,%ecx # already resolved?
jne .LOP_INVOKE_SUPER_RANGE_continue # yes - go on
jmp .LOP_INVOKE_SUPER_RANGE_resolve
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_DIRECT_RANGE: /* 0x76 */
/* File: x86/OP_INVOKE_DIRECT_RANGE.S */
/* File: x86/OP_INVOKE_DIRECT.S */
/*
* Handle a direct method call.
*
* (We could defer the "is 'this' pointer null" test to the common
* method invocation code, and use a flag to indicate that static
* calls don't count. If we do this as part of copying the arguments
* out we could avoiding loading the first arg twice.)
*
* for: invoke-direct, invoke-direct/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
EXPORT_PC()
SPILL(rPC)
movl offDvmDex_pResMethods(%ecx),%ecx # ecx<- pDvmDex->pResMethods
movzwl 4(rPC),rPC # rPC<- GFED or CCCC
movl (%ecx,%eax,4),%eax # eax<- resolved methodToCall
.if (!1)
andl $0xf,rPC # rPC<- D (or stays CCCC)
.endif
testl %eax,%eax # already resolved?
GET_VREG(%ecx,rPC) # ecx<- "this" ptr
je .LOP_INVOKE_DIRECT_RANGE_resolve # not resolved, do it now
.LOP_INVOKE_DIRECT_RANGE_finish:
UNSPILL(rPC)
testl %ecx,%ecx # null "this"?
jne common_invokeMethodRange # no, continue on
jmp common_errNullObject
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_STATIC_RANGE: /* 0x77 */
/* File: x86/OP_INVOKE_STATIC_RANGE.S */
/* File: x86/OP_INVOKE_STATIC.S */
/*
* Handle a static method call.
*
* for: invoke-static, invoke-static/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_methodClassDex(%ecx),%ecx # ecx<- pDvmDex
EXPORT_PC()
movl offDvmDex_pResMethods(%ecx),%ecx # ecx<- pDvmDex->pResMethods
movl (%ecx,%eax,4),%eax # eax<- resolved methodToCall
testl %eax,%eax
jne common_invokeMethodRange
GET_GLUE(%ecx)
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
movzwl 2(rPC),%eax
movl offMethod_clazz(%ecx),%ecx# ecx<- method->clazz
movl %eax,OUT_ARG1(%esp) # arg1<- BBBB
movl %ecx,OUT_ARG0(%esp) # arg0<- clazz
jmp .LOP_INVOKE_STATIC_RANGE_continue
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_INTERFACE_RANGE: /* 0x78 */
/* File: x86/OP_INVOKE_INTERFACE_RANGE.S */
/* File: x86/OP_INVOKE_INTERFACE.S */
/*
* Handle an interface method call.
*
* for: invoke-interface, invoke-interface/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
movzwl 4(rPC),%eax # eax<- FEDC or CCCC
GET_GLUE(%ecx)
.if (!1)
andl $0xf,%eax # eax<- C (or stays CCCC)
.endif
GET_VREG(%eax,%eax) # eax<- "this"
EXPORT_PC()
testl %eax,%eax # null this?
je common_errNullObject # yes, fail
movl offObject_clazz(%eax),%eax# eax<- thisPtr->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- class
movl offGlue_methodClassDex(%ecx),%eax # eax<- methodClassDex
movl offGlue_method(%ecx),%ecx # ecx<- method
movl %eax,OUT_ARG3(%esp) # arg3<- dex
movzwl 2(rPC),%eax # eax<- BBBB
movl %ecx,OUT_ARG2(%esp) # arg2<- method
movl %eax,OUT_ARG1(%esp) # arg1<- BBBB
SPILL(rPC)
jmp .LOP_INVOKE_INTERFACE_RANGE_continue
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_79: /* 0x79 */
/* File: x86/OP_UNUSED_79.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_7A: /* 0x7a */
/* File: x86/OP_UNUSED_7A.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_NEG_INT: /* 0x7b */
/* File: x86/OP_NEG_INT.S */
/* File: x86/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
negl %eax
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_NOT_INT: /* 0x7c */
/* File: x86/OP_NOT_INT.S */
/* File: x86/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
notl %eax
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_NEG_LONG: /* 0x7d */
/* File: x86/OP_NEG_LONG.S */
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movzbl rINST_HI,rINST_FULL # ecx<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG_WORD(%eax,%ecx,0) # eax<- v[B+0]
GET_VREG_WORD(%ecx,%ecx,1) # ecx<- v[B+1]
negl %eax
adcl $0,%ecx
negl %ecx
SET_VREG_WORD(%eax,rINST_FULL,0) # v[A+0]<- eax
SET_VREG_WORD(%ecx,rINST_FULL,1) # v[A+1]<- ecx
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_NOT_LONG: /* 0x7e */
/* File: x86/OP_NOT_LONG.S */
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
movzbl rINST_HI,rINST_FULL # ecx<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG_WORD(%eax,%ecx,0) # eax<- v[B+0]
GET_VREG_WORD(%ecx,%ecx,1) # ecx<- v[B+1]
notl %eax
notl %ecx
SET_VREG_WORD(%eax,rINST_FULL,0) # v[A+0]<- eax
SET_VREG_WORD(%ecx,rINST_FULL,1) # v[A+1]<- ecx
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_NEG_FLOAT: /* 0x7f */
/* File: x86/OP_NEG_FLOAT.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
flds (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fchs
fstps (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_NEG_DOUBLE: /* 0x80 */
/* File: x86/OP_NEG_DOUBLE.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
fldl (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fchs
fstpl (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_LONG: /* 0x81 */
/* File: x86/OP_INT_TO_LONG.S */
/* int to long vA, vB */
movzbl rINST_HI,%ecx # ecx<- +A
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
SPILL(rPC) # will step on edx later
andb $0xf,%cl # ecx<- A
cltd # edx:eax<- sssssssBBBBBBBB
SET_VREG_WORD(%edx,%ecx,1) # v[A+1]<- edx/rPC
UNSPILL(rPC)
SET_VREG_WORD(%eax,%ecx,0) # v[A+0]<- %eax
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_FLOAT: /* 0x82 */
/* File: x86/OP_INT_TO_FLOAT.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
fildl (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_DOUBLE: /* 0x83 */
/* File: x86/OP_INT_TO_DOUBLE.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
fildl (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_LONG_TO_INT: /* 0x84 */
/* File: x86/OP_LONG_TO_INT.S */
/* we ignore the high word, making this equivalent to a 32-bit reg move */
/* File: x86/OP_MOVE.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
movzbl rINST_HI,%eax # eax<- BA
andb $0xf,%al # eax<- A
shrl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
SET_VREG(%ecx,%eax) # fp[A]<-fp[B]
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_LONG_TO_FLOAT: /* 0x85 */
/* File: x86/OP_LONG_TO_FLOAT.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
fildll (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_LONG_TO_DOUBLE: /* 0x86 */
/* File: x86/OP_LONG_TO_DOUBLE.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
fildll (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_FLOAT_TO_INT: /* 0x87 */
/* File: x86/OP_FLOAT_TO_INT.S */
/* File: x86/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate. This model
* differs from what is delivered normally via the x86 fpu, so we have
* to play some games.
*/
/* float/double to int/long vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
.if 0
fldl (rFP,rINST_FULL,4) # %st0<- vB
.else
flds (rFP,rINST_FULL,4) # %st0<- vB
.endif
ftst
fnstcw LOCAL0_OFFSET(%ebp) # remember original rounding mode
movzwl LOCAL0_OFFSET(%ebp),%eax
movb $0xc,%ah
movw %ax,LOCAL0_OFFSET+2(%ebp)
fldcw LOCAL0_OFFSET+2(%ebp) # set "to zero" rounding mode
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
.if 0
fistpll (rFP,%ecx,4) # convert and store
.else
fistpl (rFP,%ecx,4) # convert and store
.endif
fldcw LOCAL0_OFFSET(%ebp) # restore previous rounding mode
jmp .LOP_FLOAT_TO_INT_continue
/* ------------------------------ */
.balign 64
.L_OP_FLOAT_TO_LONG: /* 0x88 */
/* File: x86/OP_FLOAT_TO_LONG.S */
/* File: x86/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate. This model
* differs from what is delivered normally via the x86 fpu, so we have
* to play some games.
*/
/* float/double to int/long vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
.if 0
fldl (rFP,rINST_FULL,4) # %st0<- vB
.else
flds (rFP,rINST_FULL,4) # %st0<- vB
.endif
ftst
fnstcw LOCAL0_OFFSET(%ebp) # remember original rounding mode
movzwl LOCAL0_OFFSET(%ebp),%eax
movb $0xc,%ah
movw %ax,LOCAL0_OFFSET+2(%ebp)
fldcw LOCAL0_OFFSET+2(%ebp) # set "to zero" rounding mode
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
.if 1
fistpll (rFP,%ecx,4) # convert and store
.else
fistpl (rFP,%ecx,4) # convert and store
.endif
fldcw LOCAL0_OFFSET(%ebp) # restore previous rounding mode
jmp .LOP_FLOAT_TO_LONG_continue
/* ------------------------------ */
.balign 64
.L_OP_FLOAT_TO_DOUBLE: /* 0x89 */
/* File: x86/OP_FLOAT_TO_DOUBLE.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
flds (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DOUBLE_TO_INT: /* 0x8a */
/* File: x86/OP_DOUBLE_TO_INT.S */
/* File: x86/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate. This model
* differs from what is delivered normally via the x86 fpu, so we have
* to play some games.
*/
/* float/double to int/long vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
.if 1
fldl (rFP,rINST_FULL,4) # %st0<- vB
.else
flds (rFP,rINST_FULL,4) # %st0<- vB
.endif
ftst
fnstcw LOCAL0_OFFSET(%ebp) # remember original rounding mode
movzwl LOCAL0_OFFSET(%ebp),%eax
movb $0xc,%ah
movw %ax,LOCAL0_OFFSET+2(%ebp)
fldcw LOCAL0_OFFSET+2(%ebp) # set "to zero" rounding mode
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
.if 0
fistpll (rFP,%ecx,4) # convert and store
.else
fistpl (rFP,%ecx,4) # convert and store
.endif
fldcw LOCAL0_OFFSET(%ebp) # restore previous rounding mode
jmp .LOP_DOUBLE_TO_INT_continue
/* ------------------------------ */
.balign 64
.L_OP_DOUBLE_TO_LONG: /* 0x8b */
/* File: x86/OP_DOUBLE_TO_LONG.S */
/* File: x86/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate. This model
* differs from what is delivered normally via the x86 fpu, so we have
* to play some games.
*/
/* float/double to int/long vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
.if 1
fldl (rFP,rINST_FULL,4) # %st0<- vB
.else
flds (rFP,rINST_FULL,4) # %st0<- vB
.endif
ftst
fnstcw LOCAL0_OFFSET(%ebp) # remember original rounding mode
movzwl LOCAL0_OFFSET(%ebp),%eax
movb $0xc,%ah
movw %ax,LOCAL0_OFFSET+2(%ebp)
fldcw LOCAL0_OFFSET+2(%ebp) # set "to zero" rounding mode
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
.if 1
fistpll (rFP,%ecx,4) # convert and store
.else
fistpl (rFP,%ecx,4) # convert and store
.endif
fldcw LOCAL0_OFFSET(%ebp) # restore previous rounding mode
jmp .LOP_DOUBLE_TO_LONG_continue
/* ------------------------------ */
.balign 64
.L_OP_DOUBLE_TO_FLOAT: /* 0x8c */
/* File: x86/OP_DOUBLE_TO_FLOAT.S */
/* File: x86/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
fldl (rFP,rINST_FULL,4) # %st0<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # vA<- %st0
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_BYTE: /* 0x8d */
/* File: x86/OP_INT_TO_BYTE.S */
/* File: x86/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
movsbl %al,%eax
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_CHAR: /* 0x8e */
/* File: x86/OP_INT_TO_CHAR.S */
/* File: x86/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
movzwl %ax,%eax
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_SHORT: /* 0x8f */
/* File: x86/OP_INT_TO_SHORT.S */
/* File: x86/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movzbl rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
andb $0xf,%cl # ecx<- A
FETCH_INST_WORD(1)
ADVANCE_PC(1)
movswl %ax,%eax
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT: /* 0x90 */
/* File: x86/OP_ADD_INT.S */
/* File: x86/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
addl (rFP,%ecx,4),%eax # ex: addl (rFP,%ecx,4),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_INT: /* 0x91 */
/* File: x86/OP_SUB_INT.S */
/* File: x86/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
subl (rFP,%ecx,4),%eax # ex: addl (rFP,%ecx,4),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT: /* 0x92 */
/* File: x86/OP_MUL_INT.S */
/*
* 32-bit binary multiplication.
*/
/* mul vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC)
GET_VREG(%eax,%eax) # eax<- vBB
imull (rFP,%ecx,4),%eax # trashes rPC/edx
UNSPILL(rPC)
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT: /* 0x93 */
/* File: x86/OP_DIV_INT.S */
/* File: x86/bindiv.S */
/*
* 32-bit binary div/rem operation. Handles special case of op0=minint and
* op1=-1.
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
GET_VREG(%ecx,%ecx) # eax<- vBB
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $-1,%ecx
jne .LOP_DIV_INT_continue_div
cmpl $0x80000000,%eax
jne .LOP_DIV_INT_continue_div
movl $0x80000000,%eax
jmp .LOP_DIV_INT_finish_div
/* ------------------------------ */
.balign 64
.L_OP_REM_INT: /* 0x94 */
/* File: x86/OP_REM_INT.S */
/* File: x86/bindiv.S */
/*
* 32-bit binary div/rem operation. Handles special case of op0=minint and
* op1=-1.
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
GET_VREG(%ecx,%ecx) # eax<- vBB
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $-1,%ecx
jne .LOP_REM_INT_continue_div
cmpl $0x80000000,%eax
jne .LOP_REM_INT_continue_div
movl $0,%edx
jmp .LOP_REM_INT_finish_div
/* ------------------------------ */
.balign 64
.L_OP_AND_INT: /* 0x95 */
/* File: x86/OP_AND_INT.S */
/* File: x86/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
andl (rFP,%ecx,4),%eax # ex: addl (rFP,%ecx,4),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_OR_INT: /* 0x96 */
/* File: x86/OP_OR_INT.S */
/* File: x86/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
orl (rFP,%ecx,4),%eax # ex: addl (rFP,%ecx,4),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT: /* 0x97 */
/* File: x86/OP_XOR_INT.S */
/* File: x86/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
xorl (rFP,%ecx,4),%eax # ex: addl (rFP,%ecx,4),%eax
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHL_INT: /* 0x98 */
/* File: x86/OP_SHL_INT.S */
/* File: x86/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
GET_VREG(%ecx,%ecx) # eax<- vBB
sall %cl,%eax # ex: addl %ecx,%eax
movzbl rINST_HI,%ecx # tmp<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHR_INT: /* 0x99 */
/* File: x86/OP_SHR_INT.S */
/* File: x86/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
GET_VREG(%ecx,%ecx) # eax<- vBB
sarl %cl,%eax # ex: addl %ecx,%eax
movzbl rINST_HI,%ecx # tmp<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_USHR_INT: /* 0x9a */
/* File: x86/OP_USHR_INT.S */
/* File: x86/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
GET_VREG(%eax,%eax) # eax<- vBB
GET_VREG(%ecx,%ecx) # eax<- vBB
shrl %cl,%eax # ex: addl %ecx,%eax
movzbl rINST_HI,%ecx # tmp<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
SET_VREG(%eax,%ecx)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_LONG: /* 0x9b */
/* File: x86/OP_ADD_LONG.S */
/* File: x86/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0) # rPC<- v[BB+0]
GET_VREG_WORD(%eax,%eax,1) # eax<- v[BB+1]
addl (rFP,%ecx,4),rPC # ex: addl (rFP,%ecx,4),rPC
adcl 4(rFP,%ecx,4),%eax # ex: adcl 4(rFP,%ecx,4),%eax
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
SET_VREG_WORD(rPC,rINST_FULL,0) # v[AA+0] <- rPC
UNSPILL(rPC)
SET_VREG_WORD(%eax,rINST_FULL,1) # v[AA+1] <- eax
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_LONG: /* 0x9c */
/* File: x86/OP_SUB_LONG.S */
/* File: x86/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0) # rPC<- v[BB+0]
GET_VREG_WORD(%eax,%eax,1) # eax<- v[BB+1]
subl (rFP,%ecx,4),rPC # ex: addl (rFP,%ecx,4),rPC
sbbl 4(rFP,%ecx,4),%eax # ex: adcl 4(rFP,%ecx,4),%eax
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
SET_VREG_WORD(rPC,rINST_FULL,0) # v[AA+0] <- rPC
UNSPILL(rPC)
SET_VREG_WORD(%eax,rINST_FULL,1) # v[AA+1] <- eax
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_LONG: /* 0x9d */
/* File: x86/OP_MUL_LONG.S */
/*
* Signed 64-bit integer multiply.
*
* We could definately use more free registers for
* this code. We must spill rPC (edx) because it
* is used by imul. We'll also spill rINST (ebx),
* giving us eax, ebc, ecx and edx as computational
* temps. On top of that, we'll spill rIBASE (edi)
* for use as the vB pointer and rFP (esi) for use
* as the vC pointer. Yuck.
*/
/* mul-long vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- B
movzbl 3(rPC),%ecx # ecx<- C
SPILL(rPC)
SPILL(rIBASE)
SPILL(rFP)
SPILL(rINST_FULL)
leal (rFP,%eax,4),rIBASE # rIBASE<- &v[B]
leal (rFP,%ecx,4),rFP # rFP<- &v[C]
movl 4(rIBASE),%ecx # ecx<- Bmsw
imull (rFP),%ecx # ecx<- (Bmsw*Clsw)
movl 4(rFP),%eax # eax<- Cmsw
imull (rIBASE),%eax # eax<- (Cmsw*Blsw)
addl %eax,%ecx # ecx<- (Bmsw*Clsw)+(Cmsw*Blsw)
movl (rFP),%eax # eax<- Clsw
mull (rIBASE) # eax<- (Clsw*Alsw)
UNSPILL(rINST_FULL)
UNSPILL(rFP)
jmp .LOP_MUL_LONG_continue
/* ------------------------------ */
.balign 64
.L_OP_DIV_LONG: /* 0x9e */
/* File: x86/OP_DIV_LONG.S */
/* div vAA, vBB, vCC */
movzbl 3(rPC),%eax # eax<- CC
movzbl 2(rPC),%ecx # ecx<- BB
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0)
GET_VREG_WORD(%eax,%eax,1)
movl rPC,OUT_ARG2(%esp)
testl %eax,%eax
je .LOP_DIV_LONG_check_zero
cmpl $-1,%eax
je .LOP_DIV_LONG_check_neg1
.LOP_DIV_LONG_notSpecial:
GET_VREG_WORD(rPC,%ecx,0)
GET_VREG_WORD(%ecx,%ecx,1)
.LOP_DIV_LONG_notSpecial1:
movl %eax,OUT_ARG3(%esp)
movl rPC,OUT_ARG0(%esp)
movl %ecx,OUT_ARG1(%esp)
jmp .LOP_DIV_LONG_continue
/* ------------------------------ */
.balign 64
.L_OP_REM_LONG: /* 0x9f */
/* File: x86/OP_REM_LONG.S */
/* File: x86/OP_DIV_LONG.S */
/* div vAA, vBB, vCC */
movzbl 3(rPC),%eax # eax<- CC
movzbl 2(rPC),%ecx # ecx<- BB
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0)
GET_VREG_WORD(%eax,%eax,1)
movl rPC,OUT_ARG2(%esp)
testl %eax,%eax
je .LOP_REM_LONG_check_zero
cmpl $-1,%eax
je .LOP_REM_LONG_check_neg1
.LOP_REM_LONG_notSpecial:
GET_VREG_WORD(rPC,%ecx,0)
GET_VREG_WORD(%ecx,%ecx,1)
.LOP_REM_LONG_notSpecial1:
movl %eax,OUT_ARG3(%esp)
movl rPC,OUT_ARG0(%esp)
movl %ecx,OUT_ARG1(%esp)
jmp .LOP_REM_LONG_continue
/* ------------------------------ */
.balign 64
.L_OP_AND_LONG: /* 0xa0 */
/* File: x86/OP_AND_LONG.S */
/* File: x86/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0) # rPC<- v[BB+0]
GET_VREG_WORD(%eax,%eax,1) # eax<- v[BB+1]
andl (rFP,%ecx,4),rPC # ex: addl (rFP,%ecx,4),rPC
andl 4(rFP,%ecx,4),%eax # ex: adcl 4(rFP,%ecx,4),%eax
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
SET_VREG_WORD(rPC,rINST_FULL,0) # v[AA+0] <- rPC
UNSPILL(rPC)
SET_VREG_WORD(%eax,rINST_FULL,1) # v[AA+1] <- eax
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_OR_LONG: /* 0xa1 */
/* File: x86/OP_OR_LONG.S */
/* File: x86/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0) # rPC<- v[BB+0]
GET_VREG_WORD(%eax,%eax,1) # eax<- v[BB+1]
orl (rFP,%ecx,4),rPC # ex: addl (rFP,%ecx,4),rPC
orl 4(rFP,%ecx,4),%eax # ex: adcl 4(rFP,%ecx,4),%eax
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
SET_VREG_WORD(rPC,rINST_FULL,0) # v[AA+0] <- rPC
UNSPILL(rPC)
SET_VREG_WORD(%eax,rINST_FULL,1) # v[AA+1] <- eax
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_XOR_LONG: /* 0xa2 */
/* File: x86/OP_XOR_LONG.S */
/* File: x86/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0) # rPC<- v[BB+0]
GET_VREG_WORD(%eax,%eax,1) # eax<- v[BB+1]
xorl (rFP,%ecx,4),rPC # ex: addl (rFP,%ecx,4),rPC
xorl 4(rFP,%ecx,4),%eax # ex: adcl 4(rFP,%ecx,4),%eax
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
SET_VREG_WORD(rPC,rINST_FULL,0) # v[AA+0] <- rPC
UNSPILL(rPC)
SET_VREG_WORD(%eax,rINST_FULL,1) # v[AA+1] <- eax
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHL_LONG: /* 0xa3 */
/* File: x86/OP_SHL_LONG.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance. x86 shifts automatically mask off
* the low 5 bits of %cl, so have to handle the 64 > shiftcount > 31
* case specially.
*/
/* shl-long vAA, vBB, vCC */
/* ecx gets shift count */
/* Need to spill edx */
/* rINST gets AA */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC) # spill edx
GET_VREG_WORD(%edx,%eax,1) # ecx<- v[BB+1]
GET_VREG (%ecx,%ecx) # ecx<- vCC
GET_VREG_WORD(%eax,%eax,0) # eax<- v[BB+0]
shldl %eax,%edx
sall %cl,%eax
testb $32,%cl
je 2f
movl %eax,%edx
xorl %eax,%eax
2:
movzbl rINST_HI,%ecx
SET_VREG_WORD(%edx,%ecx,1) # v[AA+1]<- %edx
UNSPILL(rPC)
FETCH_INST_WORD(2)
jmp .LOP_SHL_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_SHR_LONG: /* 0xa4 */
/* File: x86/OP_SHR_LONG.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance. x86 shifts automatically mask off
* the low 5 bits of %cl, so have to handle the 64 > shiftcount > 31
* case specially.
*/
/* shr-long vAA, vBB, vCC */
/* ecx gets shift count */
/* Need to spill edx */
/* rINST gets AA */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC) # spill edx
GET_VREG_WORD(%edx,%eax,1) # edx<- v[BB+1]
GET_VREG (%ecx,%ecx) # ecx<- vCC
GET_VREG_WORD(%eax,%eax,0) # eax<- v[BB+0]
shrdl %edx,%eax
sarl %cl,%edx
testb $32,%cl
je 2f
movl %edx,%eax
sarl $31,%edx
2:
movzbl rINST_HI,%ecx
SET_VREG_WORD(%edx,%ecx,1) # v[AA+1]<- edx
UNSPILL(rPC)
FETCH_INST_WORD(2)
jmp .LOP_SHR_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_USHR_LONG: /* 0xa5 */
/* File: x86/OP_USHR_LONG.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance. x86 shifts automatically mask off
* the low 5 bits of %cl, so have to handle the 64 > shiftcount > 31
* case specially.
*/
/* shr-long vAA, vBB, vCC */
/* ecx gets shift count */
/* Need to spill edx */
/* rINST gets AA */
movzbl 2(rPC),%eax # eax<- BB
movzbl 3(rPC),%ecx # ecx<- CC
SPILL(rPC) # spill edx
GET_VREG_WORD(%edx,%eax,1) # edx<- v[BB+1]
GET_VREG (%ecx,%ecx) # ecx<- vCC
GET_VREG_WORD(%eax,%eax,0) # eax<- v[BB+0]
shrdl %edx,%eax
shrl %cl,%edx
testb $32,%cl
je 2f
movl %edx,%eax
xorl %edx,%edx
2:
movzbl rINST_HI,%ecx
SET_VREG_WORD(%edx,%ecx,1) # v[BB+1]<- edx
UNSPILL(rPC)
jmp .LOP_USHR_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_ADD_FLOAT: /* 0xa6 */
/* File: x86/OP_ADD_FLOAT.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
flds (rFP,%eax,4) # vCC to fp stack
fadds (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstps (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_FLOAT: /* 0xa7 */
/* File: x86/OP_SUB_FLOAT.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
flds (rFP,%eax,4) # vCC to fp stack
fsubs (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstps (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_FLOAT: /* 0xa8 */
/* File: x86/OP_MUL_FLOAT.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
flds (rFP,%eax,4) # vCC to fp stack
fmuls (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstps (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_FLOAT: /* 0xa9 */
/* File: x86/OP_DIV_FLOAT.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
flds (rFP,%eax,4) # vCC to fp stack
fdivs (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstps (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_REM_FLOAT: /* 0xaa */
/* File: x86/OP_REM_FLOAT.S */
/* rem_float vAA, vBB, vCC */
movzbl 3(rPC),%ecx # ecx<- BB
movzbl 2(rPC),%eax # eax<- CC
flds (rFP,%ecx,4) # vCC to fp stack
flds (rFP,%eax,4) # vCC to fp stack
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
ADVANCE_PC(2)
fstps (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_DOUBLE: /* 0xab */
/* File: x86/OP_ADD_DOUBLE.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
fldl (rFP,%eax,4) # vCC to fp stack
faddl (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstpl (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_DOUBLE: /* 0xac */
/* File: x86/OP_SUB_DOUBLE.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
fldl (rFP,%eax,4) # vCC to fp stack
fsubl (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstpl (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_DOUBLE: /* 0xad */
/* File: x86/OP_MUL_DOUBLE.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
fldl (rFP,%eax,4) # vCC to fp stack
fmull (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstpl (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_DOUBLE: /* 0xae */
/* File: x86/OP_DIV_DOUBLE.S */
/* File: x86/binflop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop vAA, vBB, vCC */
movzbl 2(rPC),%eax # eax<- CC
movzbl 3(rPC),%ecx # ecx<- BB
fldl (rFP,%eax,4) # vCC to fp stack
fdivl (rFP,%ecx,4) # ex: faddp
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
ADVANCE_PC(2)
fstpl (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_REM_DOUBLE: /* 0xaf */
/* File: x86/OP_REM_DOUBLE.S */
/* rem_float vAA, vBB, vCC */
movzbl 3(rPC),%ecx # ecx<- BB
movzbl 2(rPC),%eax # eax<- CC
fldl (rFP,%ecx,4) # vCC to fp stack
fldl (rFP,%eax,4) # vCC to fp stack
movzbl rINST_HI,%ecx # ecx<- AA
FETCH_INST_WORD(2)
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
ADVANCE_PC(2)
fstpl (rFP,%ecx,4) # %st to vAA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT_2ADDR: /* 0xb0 */
/* File: x86/OP_ADD_INT_2ADDR.S */
/* File: x86/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
addl %eax,(rFP,%ecx,4) # for ex: addl %eax,(rFP,%ecx,4)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_INT_2ADDR: /* 0xb1 */
/* File: x86/OP_SUB_INT_2ADDR.S */
/* File: x86/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
subl %eax,(rFP,%ecx,4) # for ex: addl %eax,(rFP,%ecx,4)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT_2ADDR: /* 0xb2 */
/* File: x86/OP_MUL_INT_2ADDR.S */
/* mul vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
andb $0xf,%cl # ecx<- A
SPILL(rPC)
imull (rFP,%ecx,4),%eax
UNSPILL(rPC)
SET_VREG(%eax,%ecx)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT_2ADDR: /* 0xb3 */
/* File: x86/OP_DIV_INT_2ADDR.S */
/* File: x86/bindiv2addr.S */
/*
* 32-bit binary div/rem operation. Handles special case of op0=minint and
* op1=-1.
*/
/* div/rem/2addr vA, vB */
movzx rINST_HI,%ecx # eax<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # eax<- vBB
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%eax,rINST_FULL) # eax<- vBB
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $-1,%ecx
jne .LOP_DIV_INT_2ADDR_continue_div2addr
cmpl $0x80000000,%eax
jne .LOP_DIV_INT_2ADDR_continue_div2addr
movl $0x80000000,%eax
jmp .LOP_DIV_INT_2ADDR_finish_div2addr
/* ------------------------------ */
.balign 64
.L_OP_REM_INT_2ADDR: /* 0xb4 */
/* File: x86/OP_REM_INT_2ADDR.S */
/* File: x86/bindiv2addr.S */
/*
* 32-bit binary div/rem operation. Handles special case of op0=minint and
* op1=-1.
*/
/* div/rem/2addr vA, vB */
movzx rINST_HI,%ecx # eax<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # eax<- vBB
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%eax,rINST_FULL) # eax<- vBB
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $-1,%ecx
jne .LOP_REM_INT_2ADDR_continue_div2addr
cmpl $0x80000000,%eax
jne .LOP_REM_INT_2ADDR_continue_div2addr
movl $0,%edx
jmp .LOP_REM_INT_2ADDR_finish_div2addr
/* ------------------------------ */
.balign 64
.L_OP_AND_INT_2ADDR: /* 0xb5 */
/* File: x86/OP_AND_INT_2ADDR.S */
/* File: x86/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
andl %eax,(rFP,%ecx,4) # for ex: addl %eax,(rFP,%ecx,4)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_OR_INT_2ADDR: /* 0xb6 */
/* File: x86/OP_OR_INT_2ADDR.S */
/* File: x86/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
orl %eax,(rFP,%ecx,4) # for ex: addl %eax,(rFP,%ecx,4)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT_2ADDR: /* 0xb7 */
/* File: x86/OP_XOR_INT_2ADDR.S */
/* File: x86/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
GET_VREG(%eax,rINST_FULL) # eax<- vB
FETCH_INST_WORD(1)
andb $0xf,%cl # ecx<- A
xorl %eax,(rFP,%ecx,4) # for ex: addl %eax,(rFP,%ecx,4)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHL_INT_2ADDR: /* 0xb8 */
/* File: x86/OP_SHL_INT_2ADDR.S */
/* File: x86/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movzx rINST_HI,%ecx # eax<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # eax<- vBB
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%eax,rINST_FULL) # eax<- vAA
sall %cl,%eax # ex: sarl %cl,%eax
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHR_INT_2ADDR: /* 0xb9 */
/* File: x86/OP_SHR_INT_2ADDR.S */
/* File: x86/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movzx rINST_HI,%ecx # eax<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # eax<- vBB
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%eax,rINST_FULL) # eax<- vAA
sarl %cl,%eax # ex: sarl %cl,%eax
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_USHR_INT_2ADDR: /* 0xba */
/* File: x86/OP_USHR_INT_2ADDR.S */
/* File: x86/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movzx rINST_HI,%ecx # eax<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # eax<- vBB
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(%eax,rINST_FULL) # eax<- vAA
shrl %cl,%eax # ex: sarl %cl,%eax
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_LONG_2ADDR: /* 0xbb */
/* File: x86/OP_ADD_LONG_2ADDR.S */
/* File: x86/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG_WORD(%eax,%ecx,0) # eax<- v[B+0]
GET_VREG_WORD(%ecx,%ecx,1) # eax<- v[B+1]
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xF,rINST_LO # rINST_FULL<- A
addl %eax,(rFP,rINST_FULL,4) # example: addl %eax,(rFP,rINST_FULL,4)
adcl %ecx,4(rFP,rINST_FULL,4) # example: adcl %ecx,4(rFP,rINST_FULL,4)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_LONG_2ADDR: /* 0xbc */
/* File: x86/OP_SUB_LONG_2ADDR.S */
/* File: x86/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG_WORD(%eax,%ecx,0) # eax<- v[B+0]
GET_VREG_WORD(%ecx,%ecx,1) # eax<- v[B+1]
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xF,rINST_LO # rINST_FULL<- A
subl %eax,(rFP,rINST_FULL,4) # example: addl %eax,(rFP,rINST_FULL,4)
sbbl %ecx,4(rFP,rINST_FULL,4) # example: adcl %ecx,4(rFP,rINST_FULL,4)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_LONG_2ADDR: /* 0xbd */
/* File: x86/OP_MUL_LONG_2ADDR.S */
/*
* Signed 64-bit integer multiply, 2-addr version
*
* We could definately use more free registers for
* this code. We must spill rPC (edx) because it
* is used by imul. We'll also spill rINST (ebx),
* giving us eax, ebc, ecx and edx as computational
* temps. On top of that, we'll spill rIBASE (edi)
* for use as the vA pointer and rFP (esi) for use
* as the vB pointer. Yuck.
*/
/* mul-long/2addr vA, vB */
movzbl rINST_HI,%eax # eax<- BA
andb $0xf,%al # eax<- A
sarl $12,rINST_FULL # rINST_FULL<- B
SPILL(rPC)
SPILL(rIBASE)
SPILL(rFP)
leal (rFP,%eax,4),rIBASE # rIBASE<- &v[A]
leal (rFP,rINST_FULL,4),rFP # rFP<- &v[B]
movl 4(rIBASE),%ecx # ecx<- Amsw
imull (rFP),%ecx # ecx<- (Amsw*Blsw)
movl 4(rFP),%eax # eax<- Bmsw
imull (rIBASE),%eax # eax<- (Bmsw*Alsw)
addl %eax,%ecx # ecx<- (Amsw*Blsw)+(Bmsw*Alsw)
movl (rFP),%eax # eax<- Blsw
mull (rIBASE) # eax<- (Blsw*Alsw)
jmp .LOP_MUL_LONG_2ADDR_continue
/* ------------------------------ */
.balign 64
.L_OP_DIV_LONG_2ADDR: /* 0xbe */
/* File: x86/OP_DIV_LONG_2ADDR.S */
/* div/2addr vA, vB */
movzbl rINST_HI,%eax
shrl $4,%eax # eax<- B
movzbl rINST_HI,rINST_FULL
andb $0xf,rINST_LO # rINST_FULL<- A
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0)
GET_VREG_WORD(%eax,%eax,1)
movl rPC,OUT_ARG2(%esp)
testl %eax,%eax
je .LOP_DIV_LONG_2ADDR_check_zero
cmpl $-1,%eax
je .LOP_DIV_LONG_2ADDR_check_neg1
.LOP_DIV_LONG_2ADDR_notSpecial:
GET_VREG_WORD(rPC,rINST_FULL,0)
GET_VREG_WORD(%ecx,rINST_FULL,1)
.LOP_DIV_LONG_2ADDR_notSpecial1:
jmp .LOP_DIV_LONG_2ADDR_continue
/* ------------------------------ */
.balign 64
.L_OP_REM_LONG_2ADDR: /* 0xbf */
/* File: x86/OP_REM_LONG_2ADDR.S */
/* File: x86/OP_DIV_LONG_2ADDR.S */
/* div/2addr vA, vB */
movzbl rINST_HI,%eax
shrl $4,%eax # eax<- B
movzbl rINST_HI,rINST_FULL
andb $0xf,rINST_LO # rINST_FULL<- A
SPILL(rPC)
GET_VREG_WORD(rPC,%eax,0)
GET_VREG_WORD(%eax,%eax,1)
movl rPC,OUT_ARG2(%esp)
testl %eax,%eax
je .LOP_REM_LONG_2ADDR_check_zero
cmpl $-1,%eax
je .LOP_REM_LONG_2ADDR_check_neg1
.LOP_REM_LONG_2ADDR_notSpecial:
GET_VREG_WORD(rPC,rINST_FULL,0)
GET_VREG_WORD(%ecx,rINST_FULL,1)
.LOP_REM_LONG_2ADDR_notSpecial1:
jmp .LOP_REM_LONG_2ADDR_continue
/* ------------------------------ */
.balign 64
.L_OP_AND_LONG_2ADDR: /* 0xc0 */
/* File: x86/OP_AND_LONG_2ADDR.S */
/* File: x86/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG_WORD(%eax,%ecx,0) # eax<- v[B+0]
GET_VREG_WORD(%ecx,%ecx,1) # eax<- v[B+1]
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xF,rINST_LO # rINST_FULL<- A
andl %eax,(rFP,rINST_FULL,4) # example: addl %eax,(rFP,rINST_FULL,4)
andl %ecx,4(rFP,rINST_FULL,4) # example: adcl %ecx,4(rFP,rINST_FULL,4)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_OR_LONG_2ADDR: /* 0xc1 */
/* File: x86/OP_OR_LONG_2ADDR.S */
/* File: x86/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG_WORD(%eax,%ecx,0) # eax<- v[B+0]
GET_VREG_WORD(%ecx,%ecx,1) # eax<- v[B+1]
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xF,rINST_LO # rINST_FULL<- A
orl %eax,(rFP,rINST_FULL,4) # example: addl %eax,(rFP,rINST_FULL,4)
orl %ecx,4(rFP,rINST_FULL,4) # example: adcl %ecx,4(rFP,rINST_FULL,4)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_XOR_LONG_2ADDR: /* 0xc2 */
/* File: x86/OP_XOR_LONG_2ADDR.S */
/* File: x86/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG_WORD(%eax,%ecx,0) # eax<- v[B+0]
GET_VREG_WORD(%ecx,%ecx,1) # eax<- v[B+1]
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xF,rINST_LO # rINST_FULL<- A
xorl %eax,(rFP,rINST_FULL,4) # example: addl %eax,(rFP,rINST_FULL,4)
xorl %ecx,4(rFP,rINST_FULL,4) # example: adcl %ecx,4(rFP,rINST_FULL,4)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHL_LONG_2ADDR: /* 0xc3 */
/* File: x86/OP_SHL_LONG_2ADDR.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shl-long/2addr vA, vB */
/* ecx gets shift count */
/* Need to spill edx */
/* rINST gets AA */
movzbl rINST_HI,%ecx # ecx<- BA
movzbl rINST_HI,rINST_FULL # rINST_HI<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG_WORD(%eax,rINST_FULL,0) # eax<- v[AA+0]
sarl $4,%ecx # ecx<- B
SPILL(rPC)
GET_VREG_WORD(%edx,rINST_FULL,1) # edx<- v[AA+1]
GET_VREG(%ecx,%ecx) # ecx<- vBB
shldl %eax,%edx
sall %cl,%eax
testb $32,%cl
je 2f
movl %eax,%edx
xorl %eax,%eax
2:
SET_VREG_WORD(%edx,rINST_FULL,1) # v[AA+1]<- edx
UNSPILL(rPC)
jmp .LOP_SHL_LONG_2ADDR_finish
/* ------------------------------ */
.balign 64
.L_OP_SHR_LONG_2ADDR: /* 0xc4 */
/* File: x86/OP_SHR_LONG_2ADDR.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shl-long/2addr vA, vB */
/* ecx gets shift count */
/* Need to spill edx */
/* rINST gets AA */
movzbl rINST_HI,%ecx # ecx<- BA
movzbl rINST_HI,rINST_FULL # rINST_HI<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG_WORD(%eax,rINST_FULL,0) # eax<- v[AA+0]
sarl $4,%ecx # ecx<- B
SPILL(rPC)
GET_VREG_WORD(%edx,rINST_FULL,1) # edx<- v[AA+1]
GET_VREG(%ecx,%ecx) # ecx<- vBB
shrdl %edx,%eax
sarl %cl,%edx
testb $32,%cl
je 2f
movl %edx,%eax
sarl $31,%edx
2:
SET_VREG_WORD(%edx,rINST_FULL,1) # v[AA+1]<- edx
UNSPILL(rPC)
jmp .LOP_SHR_LONG_2ADDR_finish
/* ------------------------------ */
.balign 64
.L_OP_USHR_LONG_2ADDR: /* 0xc5 */
/* File: x86/OP_USHR_LONG_2ADDR.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shl-long/2addr vA, vB */
/* ecx gets shift count */
/* Need to spill edx */
/* rINST gets AA */
movzbl rINST_HI,%ecx # ecx<- BA
movzbl rINST_HI,rINST_FULL # rINST_HI<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG_WORD(%eax,rINST_FULL,0) # eax<- v[AA+0]
sarl $4,%ecx # ecx<- B
SPILL(rPC)
GET_VREG_WORD(%edx,rINST_FULL,1) # edx<- v[AA+1]
GET_VREG(%ecx,%ecx) # ecx<- vBB
shrdl %edx,%eax
shrl %cl,%edx
testb $32,%cl
je 2f
movl %edx,%eax
xorl %edx,%edx
2:
SET_VREG_WORD(%edx,rINST_FULL,1) # v[AA+1]<- edx
UNSPILL(rPC)
jmp .LOP_USHR_LONG_2ADDR_finish
/* ------------------------------ */
.balign 64
.L_OP_ADD_FLOAT_2ADDR: /* 0xc6 */
/* File: x86/OP_ADD_FLOAT_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
flds (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
fadds (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_FLOAT_2ADDR: /* 0xc7 */
/* File: x86/OP_SUB_FLOAT_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
flds (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
fsubs (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_FLOAT_2ADDR: /* 0xc8 */
/* File: x86/OP_MUL_FLOAT_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
flds (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
fmuls (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_FLOAT_2ADDR: /* 0xc9 */
/* File: x86/OP_DIV_FLOAT_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
flds (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
fdivs (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_REM_FLOAT_2ADDR: /* 0xca */
/* File: x86/OP_REM_FLOAT_2ADDR.S */
/* rem_float/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
flds (rFP,rINST_FULL,4) # vBB to fp stack
andb $0xf,%cl # ecx<- A
flds (rFP,%ecx,4) # vAA to fp stack
FETCH_INST_WORD(1)
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
ADVANCE_PC(1)
fstps (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_DOUBLE_2ADDR: /* 0xcb */
/* File: x86/OP_ADD_DOUBLE_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
fldl (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
faddl (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SUB_DOUBLE_2ADDR: /* 0xcc */
/* File: x86/OP_SUB_DOUBLE_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
fldl (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
fsubl (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_DOUBLE_2ADDR: /* 0xcd */
/* File: x86/OP_MUL_DOUBLE_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
fldl (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
fmull (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_DOUBLE_2ADDR: /* 0xce */
/* File: x86/OP_DIV_DOUBLE_2ADDR.S */
/* File: x86/binflop2addr.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp
*/
/* binop/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
andb $0xf,%cl # ecx<- A
fldl (rFP,%ecx,4) # vAA to fp stack
sarl $12,rINST_FULL # rINST_FULL<- B
fdivl (rFP,rINST_FULL,4) # ex: faddp
FETCH_INST_WORD(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_REM_DOUBLE_2ADDR: /* 0xcf */
/* File: x86/OP_REM_DOUBLE_2ADDR.S */
/* rem_float/2addr vA, vB */
movzx rINST_HI,%ecx # ecx<- A+
sarl $12,rINST_FULL # rINST_FULL<- B
fldl (rFP,rINST_FULL,4) # vBB to fp stack
andb $0xf,%cl # ecx<- A
fldl (rFP,%ecx,4) # vAA to fp stack
FETCH_INST_WORD(1)
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
ADVANCE_PC(1)
fstpl (rFP,%ecx,4) # %st to vA
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT_LIT16: /* 0xd0 */
/* File: x86/OP_ADD_INT_LIT16.S */
/* File: x86/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
addl %ecx,%eax # for example: addl %ecx, %eax
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_RSUB_INT: /* 0xd1 */
/* File: x86/OP_RSUB_INT.S */
/* File: x86/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
subl %eax,%ecx # for example: addl %ecx, %eax
SET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT_LIT16: /* 0xd2 */
/* File: x86/OP_MUL_INT_LIT16.S */
/* mul/lit16 vA, vB, #+CCCC */
/* Need A in rINST_FULL, ssssCCCC in ecx, vB in eax */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
SPILL(rPC)
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
imull %ecx,%eax # trashes rPC
UNSPILL(rPC)
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT_LIT16: /* 0xd3 */
/* File: x86/OP_DIV_INT_LIT16.S */
/* File: x86/bindivLit16.S */
/*
* 32-bit binary div/rem operation. Handles special case of op0=minint and
* op1=-1.
*/
/* div/rem/lit16 vA, vB, #+CCCC */
/* Need A in rINST_FULL, ssssCCCC in ecx, vB in eax */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $-1,%ecx
jne .LOP_DIV_INT_LIT16_continue_div
cmpl $0x80000000,%eax
jne .LOP_DIV_INT_LIT16_continue_div
movl $0x80000000,%eax
jmp .LOP_DIV_INT_LIT16_finish_div
/* ------------------------------ */
.balign 64
.L_OP_REM_INT_LIT16: /* 0xd4 */
/* File: x86/OP_REM_INT_LIT16.S */
/* File: x86/bindivLit16.S */
/*
* 32-bit binary div/rem operation. Handles special case of op0=minint and
* op1=-1.
*/
/* div/rem/lit16 vA, vB, #+CCCC */
/* Need A in rINST_FULL, ssssCCCC in ecx, vB in eax */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $-1,%ecx
jne .LOP_REM_INT_LIT16_continue_div
cmpl $0x80000000,%eax
jne .LOP_REM_INT_LIT16_continue_div
movl $0,%edx
jmp .LOP_REM_INT_LIT16_finish_div
/* ------------------------------ */
.balign 64
.L_OP_AND_INT_LIT16: /* 0xd5 */
/* File: x86/OP_AND_INT_LIT16.S */
/* File: x86/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
andl %ecx,%eax # for example: addl %ecx, %eax
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_OR_INT_LIT16: /* 0xd6 */
/* File: x86/OP_OR_INT_LIT16.S */
/* File: x86/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
orl %ecx,%eax # for example: addl %ecx, %eax
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT_LIT16: /* 0xd7 */
/* File: x86/OP_XOR_INT_LIT16.S */
/* File: x86/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movzbl rINST_HI,%eax # eax<- 000000BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB
movswl 2(rPC),%ecx # ecx<- ssssCCCC
movzbl rINST_HI,rINST_FULL # rINST_FULL<- BA
andb $0xf,rINST_LO # rINST_FULL<- A
xor %ecx,%eax # for example: addl %ecx, %eax
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT_LIT8: /* 0xd8 */
/* File: x86/OP_ADD_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
addl %ecx,%eax # ex: addl %ecx,%eax
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_RSUB_INT_LIT8: /* 0xd9 */
/* File: x86/OP_RSUB_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
subl %eax,%ecx # ex: addl %ecx,%eax
SET_VREG (%ecx,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT_LIT8: /* 0xda */
/* File: x86/OP_MUL_INT_LIT8.S */
/* mul/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
SPILL(rPC)
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
imull %ecx,%eax # trashes rPC
UNSPILL(rPC)
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT_LIT8: /* 0xdb */
/* File: x86/OP_DIV_INT_LIT8.S */
/* File: x86/bindivLit8.S */
/*
* 32-bit div/rem "lit8" binary operation. Handles special case of
* op0=minint & op1=-1
*/
/* div/rem/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
GET_VREG (%eax,%eax) # eax<- rBB
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $0x80000000,%eax
jne .LOP_DIV_INT_LIT8_continue_div
cmpl $-1,%ecx
jne .LOP_DIV_INT_LIT8_continue_div
movl $0x80000000,%eax
jmp .LOP_DIV_INT_LIT8_finish_div
/* ------------------------------ */
.balign 64
.L_OP_REM_INT_LIT8: /* 0xdc */
/* File: x86/OP_REM_INT_LIT8.S */
/* File: x86/bindivLit8.S */
/*
* 32-bit div/rem "lit8" binary operation. Handles special case of
* op0=minint & op1=-1
*/
/* div/rem/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
GET_VREG (%eax,%eax) # eax<- rBB
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
SPILL(rPC)
cmpl $0,%ecx
je common_errDivideByZero
cmpl $0x80000000,%eax
jne .LOP_REM_INT_LIT8_continue_div
cmpl $-1,%ecx
jne .LOP_REM_INT_LIT8_continue_div
movl $0,%edx
jmp .LOP_REM_INT_LIT8_finish_div
/* ------------------------------ */
.balign 64
.L_OP_AND_INT_LIT8: /* 0xdd */
/* File: x86/OP_AND_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
andl %ecx,%eax # ex: addl %ecx,%eax
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_OR_INT_LIT8: /* 0xde */
/* File: x86/OP_OR_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
orl %ecx,%eax # ex: addl %ecx,%eax
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT_LIT8: /* 0xdf */
/* File: x86/OP_XOR_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
xor %ecx,%eax # ex: addl %ecx,%eax
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHL_INT_LIT8: /* 0xe0 */
/* File: x86/OP_SHL_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
sall %cl,%eax # ex: addl %ecx,%eax
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SHR_INT_LIT8: /* 0xe1 */
/* File: x86/OP_SHR_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
sarl %cl,%eax # ex: addl %ecx,%eax
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_USHR_INT_LIT8: /* 0xe2 */
/* File: x86/OP_USHR_INT_LIT8.S */
/* File: x86/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbl 2(rPC),%eax # eax<- BB
movsbl 3(rPC),%ecx # ecx<- ssssssCC
movzx rINST_HI,rINST_FULL # rINST_FULL<- AA
GET_VREG (%eax,%eax) # eax<- rBB
shrl %cl,%eax # ex: addl %ecx,%eax
SET_VREG (%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_E3: /* 0xe3 */
/* File: x86/OP_UNUSED_E3.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_E4: /* 0xe4 */
/* File: x86/OP_UNUSED_E4.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_E5: /* 0xe5 */
/* File: x86/OP_UNUSED_E5.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_E6: /* 0xe6 */
/* File: x86/OP_UNUSED_E6.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_E7: /* 0xe7 */
/* File: x86/OP_UNUSED_E7.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_IGET_WIDE_VOLATILE: /* 0xe8 */
/* (stub) */
GET_GLUE(%ecx)
SAVE_PC_TO_GLUE(%ecx) # only need to export these two
SAVE_FP_TO_GLUE(%ecx) # only need to export these two
movl %ecx,OUT_ARG0(%esp) # glue is first arg to function
call dvmMterp_OP_IGET_WIDE_VOLATILE # do the real work
GET_GLUE(%ecx)
LOAD_PC_FROM_GLUE(%ecx) # retrieve updated values
LOAD_FP_FROM_GLUE(%ecx) # retrieve updated values
FETCH_INST()
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IPUT_WIDE_VOLATILE: /* 0xe9 */
/* (stub) */
GET_GLUE(%ecx)
SAVE_PC_TO_GLUE(%ecx) # only need to export these two
SAVE_FP_TO_GLUE(%ecx) # only need to export these two
movl %ecx,OUT_ARG0(%esp) # glue is first arg to function
call dvmMterp_OP_IPUT_WIDE_VOLATILE # do the real work
GET_GLUE(%ecx)
LOAD_PC_FROM_GLUE(%ecx) # retrieve updated values
LOAD_FP_FROM_GLUE(%ecx) # retrieve updated values
FETCH_INST()
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SGET_WIDE_VOLATILE: /* 0xea */
/* (stub) */
GET_GLUE(%ecx)
SAVE_PC_TO_GLUE(%ecx) # only need to export these two
SAVE_FP_TO_GLUE(%ecx) # only need to export these two
movl %ecx,OUT_ARG0(%esp) # glue is first arg to function
call dvmMterp_OP_SGET_WIDE_VOLATILE # do the real work
GET_GLUE(%ecx)
LOAD_PC_FROM_GLUE(%ecx) # retrieve updated values
LOAD_FP_FROM_GLUE(%ecx) # retrieve updated values
FETCH_INST()
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_SPUT_WIDE_VOLATILE: /* 0xeb */
/* (stub) */
GET_GLUE(%ecx)
SAVE_PC_TO_GLUE(%ecx) # only need to export these two
SAVE_FP_TO_GLUE(%ecx) # only need to export these two
movl %ecx,OUT_ARG0(%esp) # glue is first arg to function
call dvmMterp_OP_SPUT_WIDE_VOLATILE # do the real work
GET_GLUE(%ecx)
LOAD_PC_FROM_GLUE(%ecx) # retrieve updated values
LOAD_FP_FROM_GLUE(%ecx) # retrieve updated values
FETCH_INST()
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_BREAKPOINT: /* 0xec */
/* File: x86/OP_BREAKPOINT.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_THROW_VERIFICATION_ERROR: /* 0xed */
/* File: x86/OP_THROW_VERIFICATION_ERROR.S */
/*
* Handle a throw-verification-error instruction. This throws an
* exception for an error discovered during verification. The
* exception is indicated by AA, with some detail provided by BBBB.
*/
/* op AA, ref@BBBB */
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
EXPORT_PC()
movzbl rINST_HI,rINST_FULL # rINST_FULL<- AA
movl %eax,OUT_ARG2(%esp) # arg2<- BBBB
movl rINST_FULL,OUT_ARG1(%esp) # arg1<- AA
movl %ecx,OUT_ARG0(%esp) # arg0<- method
SPILL(rPC)
call dvmThrowVerificationError # call(method, kind, ref)
UNSPILL(rPC)
jmp common_exceptionThrown # handle exception
/* ------------------------------ */
.balign 64
.L_OP_EXECUTE_INLINE: /* 0xee */
/* File: x86/OP_EXECUTE_INLINE.S */
/*
* Execute a "native inline" instruction.
*
* We will be calling through a function table:
*
* (*gDvmInlineOpsTable[opIndex].func)(arg0, arg1, arg2, arg3, pResult)
*
*/
/* [opt] execute-inline vAA, {vC, vD, vE, vF}, inline@BBBB */
GET_GLUE(%ecx)
EXPORT_PC()
movzwl 2(rPC),%eax # eax<- BBBB
leal offGlue_retval(%ecx),%ecx # ecx<- & glue->retval
movl %ecx,OUT_ARG4(%esp)
sarl $12,rINST_FULL # rINST_FULL<- arg count (0-4)
SPILL(rPC)
call .LOP_EXECUTE_INLINE_continue # make call; will return after
UNSPILL(rPC)
testl %eax,%eax # successful?
FETCH_INST_WORD(3)
je common_exceptionThrown # no, handle exception
ADVANCE_PC(3)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_EXECUTE_INLINE_RANGE: /* 0xef */
/* (stub) */
GET_GLUE(%ecx)
SAVE_PC_TO_GLUE(%ecx) # only need to export these two
SAVE_FP_TO_GLUE(%ecx) # only need to export these two
movl %ecx,OUT_ARG0(%esp) # glue is first arg to function
call dvmMterp_OP_EXECUTE_INLINE_RANGE # do the real work
GET_GLUE(%ecx)
LOAD_PC_FROM_GLUE(%ecx) # retrieve updated values
LOAD_FP_FROM_GLUE(%ecx) # retrieve updated values
FETCH_INST()
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_DIRECT_EMPTY: /* 0xf0 */
/* File: x86/OP_INVOKE_DIRECT_EMPTY.S */
/*
* invoke-direct-empty is a no-op in a "standard" interpreter.
*/
FETCH_INST_WORD(3)
ADVANCE_PC(3)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_F1: /* 0xf1 */
/* File: x86/OP_UNUSED_F1.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_IGET_QUICK: /* 0xf2 */
/* File: x86/OP_IGET_QUICK.S */
/* For: iget-quick, iget-object-quick */
/* op vA, vB, offset@CCCC */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # vB (object we're operating on)
movzwl 2(rPC),%eax # eax<- field byte offset
cmpl $0,%ecx # is object null?
je common_errNullObject
movl (%ecx,%eax,1),%eax
movzbl rINST_HI,%ecx
FETCH_INST_WORD(2)
ADVANCE_PC(2)
andb $0xf,%cl # rINST_FULL<- A
SET_VREG (%eax,%ecx) # fp[A]<- result
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IGET_WIDE_QUICK: /* 0xf3 */
/* File: x86/OP_IGET_WIDE_QUICK.S */
/* For: iget-wide-quick */
/* op vA, vB, offset@CCCC */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # vB (object we're operating on)
movzwl 2(rPC),%eax # eax<- field byte offset
cmpl $0,%ecx # is object null?
je common_errNullObject
leal (%ecx,%eax,1),%eax # eax<- address of 64-bit source
movl (%eax),%ecx # ecx<- lsw
movl 4(%eax),%eax # eax<- msw
movzbl rINST_HI,rINST_FULL
andb $0xf,rINST_LO # rINST_FULL<- A
SET_VREG_WORD(%ecx,rINST_FULL,0) # v[A+0]<- lsw
SET_VREG_WORD(%eax,rINST_FULL,1) # v[A+1]<- msw
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IGET_OBJECT_QUICK: /* 0xf4 */
/* File: x86/OP_IGET_OBJECT_QUICK.S */
/* File: x86/OP_IGET_QUICK.S */
/* For: iget-quick, iget-object-quick */
/* op vA, vB, offset@CCCC */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # vB (object we're operating on)
movzwl 2(rPC),%eax # eax<- field byte offset
cmpl $0,%ecx # is object null?
je common_errNullObject
movl (%ecx,%eax,1),%eax
movzbl rINST_HI,%ecx
FETCH_INST_WORD(2)
ADVANCE_PC(2)
andb $0xf,%cl # rINST_FULL<- A
SET_VREG (%eax,%ecx) # fp[A]<- result
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IPUT_QUICK: /* 0xf5 */
/* File: x86/OP_IPUT_QUICK.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # vB (object we're operating on)
movzbl rINST_HI,rINST_FULL
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movzwl 2(rPC),%eax # eax<- field byte offset
testl %ecx,%ecx # is object null?
je common_errNullObject
movl rINST_FULL,(%ecx,%eax,1)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IPUT_WIDE_QUICK: /* 0xf6 */
/* File: x86/OP_IPUT_WIDE_QUICK.S */
/* For: iput-wide-quick */
/* op vA, vB, offset@CCCC */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # vB (object we're operating on)
movzwl 2(rPC),%eax # eax<- field byte offset
testl %ecx,%ecx # is object null?
je common_errNullObject
leal (%ecx,%eax,1),%ecx # ecx<- Address of 64-bit target
movzbl rINST_HI,rINST_FULL
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG_WORD(%eax,rINST_FULL,0) # eax<- lsw
GET_VREG_WORD(rINST_FULL,rINST_FULL,1) # rINST_FULL<- msw
movl %eax,(%ecx)
movl rINST_FULL,4(%ecx)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_IPUT_OBJECT_QUICK: /* 0xf7 */
/* File: x86/OP_IPUT_OBJECT_QUICK.S */
/* File: x86/OP_IPUT_QUICK.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
movzbl rINST_HI,%ecx # ecx<- BA
sarl $4,%ecx # ecx<- B
GET_VREG(%ecx,%ecx) # vB (object we're operating on)
movzbl rINST_HI,rINST_FULL
andb $0xf,rINST_LO # rINST_FULL<- A
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movzwl 2(rPC),%eax # eax<- field byte offset
testl %ecx,%ecx # is object null?
je common_errNullObject
movl rINST_FULL,(%ecx,%eax,1)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL_QUICK: /* 0xf8 */
/* File: x86/OP_INVOKE_VIRTUAL_QUICK.S */
/*
* Handle an optimized virtual method call.
*
* for: [opt] invoke-virtual-quick, invoke-virtual-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
movzwl 4(rPC),%eax # eax<- FEDC or CCCC
movzwl 2(rPC),%ecx # ecx<- BBBB
.if (!0)
andl $0xf,%eax # eax<- C (or stays CCCC)
.endif
GET_VREG(%eax,%eax) # eax<- vC ("this" ptr)
testl %eax,%eax # null?
je common_errNullObject # yep, throw exception
movl offObject_clazz(%eax),%eax # eax<- thisPtr->clazz
movl offClassObject_vtable(%eax),%eax # eax<- thisPtr->clazz->vtable
EXPORT_PC() # might throw later - get ready
movl (%eax,%ecx,4),%eax # eax<- vtable[BBBB]
jmp common_invokeMethodNoRange
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL_QUICK_RANGE: /* 0xf9 */
/* File: x86/OP_INVOKE_VIRTUAL_QUICK_RANGE.S */
/* File: x86/OP_INVOKE_VIRTUAL_QUICK.S */
/*
* Handle an optimized virtual method call.
*
* for: [opt] invoke-virtual-quick, invoke-virtual-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
movzwl 4(rPC),%eax # eax<- FEDC or CCCC
movzwl 2(rPC),%ecx # ecx<- BBBB
.if (!1)
andl $0xf,%eax # eax<- C (or stays CCCC)
.endif
GET_VREG(%eax,%eax) # eax<- vC ("this" ptr)
testl %eax,%eax # null?
je common_errNullObject # yep, throw exception
movl offObject_clazz(%eax),%eax # eax<- thisPtr->clazz
movl offClassObject_vtable(%eax),%eax # eax<- thisPtr->clazz->vtable
EXPORT_PC() # might throw later - get ready
movl (%eax,%ecx,4),%eax # eax<- vtable[BBBB]
jmp common_invokeMethodRange
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER_QUICK: /* 0xfa */
/* File: x86/OP_INVOKE_SUPER_QUICK.S */
/*
* Handle an optimized "super" method call.
*
* for: [opt] invoke-super-quick, invoke-super-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%ecx)
movzwl 4(rPC),%eax # eax<- GFED or CCCC
movl offGlue_method(%ecx),%ecx # ecx<- current method
.if (!0)
andl $0xf,%eax # eax<- D (or stays CCCC)
.endif
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
GET_VREG(%eax,%eax) # eax<- "this"
movl offClassObject_super(%ecx),%ecx # ecx<- method->clazz->super
testl %eax,%eax # null "this"?
je common_errNullObject # "this" is null, throw exception
movzwl 2(rPC),%eax # eax<- BBBB
movl offClassObject_vtable(%ecx),%ecx # ecx<- vtable
EXPORT_PC()
movl (%ecx,%eax,4),%eax # eax<- super->vtable[BBBB]
jmp common_invokeMethodNoRange
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER_QUICK_RANGE: /* 0xfb */
/* File: x86/OP_INVOKE_SUPER_QUICK_RANGE.S */
/* File: x86/OP_INVOKE_SUPER_QUICK.S */
/*
* Handle an optimized "super" method call.
*
* for: [opt] invoke-super-quick, invoke-super-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
GET_GLUE(%ecx)
movzwl 4(rPC),%eax # eax<- GFED or CCCC
movl offGlue_method(%ecx),%ecx # ecx<- current method
.if (!1)
andl $0xf,%eax # eax<- D (or stays CCCC)
.endif
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
GET_VREG(%eax,%eax) # eax<- "this"
movl offClassObject_super(%ecx),%ecx # ecx<- method->clazz->super
testl %eax,%eax # null "this"?
je common_errNullObject # "this" is null, throw exception
movzwl 2(rPC),%eax # eax<- BBBB
movl offClassObject_vtable(%ecx),%ecx # ecx<- vtable
EXPORT_PC()
movl (%ecx,%eax,4),%eax # eax<- super->vtable[BBBB]
jmp common_invokeMethodRange
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_FC: /* 0xfc */
/* File: x86/OP_UNUSED_FC.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_FD: /* 0xfd */
/* File: x86/OP_UNUSED_FD.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_FE: /* 0xfe */
/* File: x86/OP_UNUSED_FE.S */
/* File: x86/unused.S */
jmp common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_FF: /* 0xff */
/* File: x86/OP_UNUSED_FF.S */
/* File: x86/unused.S */
jmp common_abort
.balign 64
.size dvmAsmInstructionStart, .-dvmAsmInstructionStart
.global dvmAsmInstructionEnd
dvmAsmInstructionEnd:
/*
* ===========================================================================
* Sister implementations
* ===========================================================================
*/
.global dvmAsmSisterStart
.type dvmAsmSisterStart, %function
.text
.balign 4
dvmAsmSisterStart:
/* continuation for OP_CONST_STRING */
/* This is the less common path, so we'll redo some work
here rather than force spills on the common path */
.LOP_CONST_STRING_resolve:
GET_GLUE(%eax)
movl %ecx,rINST_FULL # rINST_FULL<- AA
EXPORT_PC()
movl offGlue_method(%eax),%eax # eax<- glue->method
movzwl 2(rPC),%ecx # ecx<- BBBB
movl offMethod_clazz(%eax),%eax
SPILL(rPC)
movl %ecx,OUT_ARG1(%esp)
movl %eax,OUT_ARG0(%esp)
call dvmResolveString # go resolve
UNSPILL(rPC)
testl %eax,%eax # failed?
je common_exceptionThrown
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_CONST_STRING_JUMBO */
/* This is the less common path, so we'll redo some work
here rather than force spills on the common path */
.LOP_CONST_STRING_JUMBO_resolve:
GET_GLUE(%eax)
movl %ecx,rINST_FULL # rINST_FULL<- AA
EXPORT_PC()
movl offGlue_method(%eax),%eax # eax<- glue->method
movl 2(rPC),%ecx # ecx<- BBBBBBBB
movl offMethod_clazz(%eax),%eax
SPILL(rPC)
movl %ecx,OUT_ARG1(%esp)
movl %eax,OUT_ARG0(%esp)
call dvmResolveString # go resolve
UNSPILL(rPC)
testl %eax,%eax # failed?
je common_exceptionThrown
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(3)
ADVANCE_PC(3)
GOTO_NEXT
/* continuation for OP_CONST_CLASS */
/* This is the less common path, so we'll redo some work
here rather than force spills on the common path */
.LOP_CONST_CLASS_resolve:
GET_GLUE(%eax)
movl %ecx,rINST_FULL # rINST_FULL<- AA
EXPORT_PC()
movl offGlue_method(%eax),%eax # eax<- glue->method
movl $1,OUT_ARG2(%esp) # true
movzwl 2(rPC),%ecx # ecx<- BBBB
movl offMethod_clazz(%eax),%eax
SPILL(rPC)
movl %ecx,OUT_ARG1(%esp)
movl %eax,OUT_ARG0(%esp)
call dvmResolveClass # go resolve
UNSPILL(rPC)
testl %eax,%eax # failed?
je common_exceptionThrown
SET_VREG(%eax,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_MONITOR_ENTER */
.LOP_MONITOR_ENTER_continue:
SPILL(rPC) # have to - caller save
movl %ecx,OUT_ARG0(%esp)
movl %eax,OUT_ARG1(%esp)
call dvmLockObject # dvmLockObject(self,object)
UNSPILL(rPC)
#ifdef WITH_DEADLOCK_PREDICTION
GET_GLUE(%ecx)
movl offGlueSelf(%ecx),%ecx # ecx<- glue->self
movl offThread_exception(%ecx),%eax
testl %eax,%eax
jne common_exceptionThrown
#endif
ADVANCE_PC(1)
GOTO_NEXT
/* continuation for OP_MONITOR_EXIT */
.LOP_MONITOR_EXIT_continue:
call dvmUnlockObject # unlock(self,obj)
UNSPILL(rPC)
FETCH_INST_WORD(1)
testl %eax,%eax # success?
ADVANCE_PC(1)
je common_exceptionThrown # no, exception pending
GOTO_NEXT
.LOP_MONITOR_EXIT_errNullObject:
ADVANCE_PC(1) # advance before throw
jmp common_errNullObject
/* continuation for OP_CHECK_CAST */
/*
* Trivial test failed, need to perform full check. This is common.
* ecx holds obj->clazz
* eax holds class resolved from BBBB
* rINST_FULL holds object
*/
.LOP_CHECK_CAST_fullcheck:
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
SPILL(rPC)
call dvmInstanceofNonTrivial # eax<- boolean result
UNSPILL(rPC)
testl %eax,%eax # failed?
jne .LOP_CHECK_CAST_okay # no, success
# A cast has failed. We need to throw a ClassCastException with the
# class of the object that failed to be cast.
EXPORT_PC()
movl offObject_clazz(rINST_FULL),%ecx # ecx<- obj->clazz
movl $.LstrClassCastException,%eax
movl offClassObject_descriptor(%ecx),%ecx
movl %eax,OUT_ARG0(%esp) # arg0<- message
movl %ecx,OUT_ARG1(%esp) # arg1<- obj->clazz->descriptor
SPILL(rPC)
call dvmThrowExceptionWithClassMessage
UNSPILL(rPC)
jmp common_exceptionThrown
/*
* Resolution required. This is the least-likely path, and we're
* going to have to recreate some data.
*
* rINST_FULL holds object
*/
.LOP_CHECK_CAST_resolve:
GET_GLUE(%ecx)
EXPORT_PC()
movzwl 2(rPC),%eax # eax<- BBBB
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
movl %eax,OUT_ARG1(%esp) # arg1<- BBBB
movl offMethod_clazz(%ecx),%ecx # ecx<- metho->clazz
movl $0,OUT_ARG2(%esp) # arg2<- false
movl %ecx,OUT_ARG0(%esp) # arg0<- method->clazz
SPILL(rPC)
call dvmResolveClass # eax<- resolved ClassObject ptr
UNSPILL(rPC)
testl %eax,%eax # got null?
je common_exceptionThrown # yes, handle exception
movl offObject_clazz(rINST_FULL),%ecx # ecx<- obj->clazz
jmp .LOP_CHECK_CAST_resolved # pick up where we left off
/* continuation for OP_INSTANCE_OF */
/*
* Trivial test failed, need to perform full check. This is common.
* eax holds obj->clazz
* ecx holds class resolved from BBBB
* rINST_HI has BA
* rPC already spilled
*/
.LOP_INSTANCE_OF_fullcheck:
movl %eax,OUT_ARG0(%esp)
movl %ecx,OUT_ARG1(%esp)
call dvmInstanceofNonTrivial # eax<- boolean result
# fall through to OP_INSTANCE_OF_store
/*
* eax holds boolean result
* rINST_HI holds BA
*/
.LOP_INSTANCE_OF_store:
UNSPILL(rPC)
movzbl rINST_HI,%ecx # ecx<- BA
FETCH_INST_WORD(2)
andb $0xf,%cl # ecl<- A
ADVANCE_PC(2)
SET_VREG(%eax,%ecx) # vA<- eax
GOTO_NEXT
/*
* Trivial test succeeded, save and bail.
* r9 holds A
*/
.LOP_INSTANCE_OF_trivial:
UNSPILL(rPC)
movzbl rINST_HI,%ecx # ecx<- BA
FETCH_INST_WORD(2)
andb $0xf,%cl # ecl<- A
ADVANCE_PC(2)
movl $1,%eax
SET_VREG(%eax,%ecx) # vA<- true
GOTO_NEXT
/*
* Resolution required. This is the least-likely path.
*
* rPC holds BBBB
* rINST_HI holds BA
*/
.LOP_INSTANCE_OF_resolve:
movl rPC,OUT_ARG1(%esp) # arg1<- BBBB
GET_GLUE(%ecx)
UNSPILL(rPC)
movl offGlue_method(%ecx),%ecx
movl $1,OUT_ARG2(%esp) # arg2<- true
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
EXPORT_PC()
movl %ecx,OUT_ARG0(%esp) # arg0<- method->clazz
call dvmResolveClass # eax<- resolved ClassObject ptr
UNSPILL(rPC)
testl %eax,%eax # success?
je common_exceptionThrown # no, handle exception
/* Now, we need to sync up with fast path. We need eax to
* hold the obj->clazz, and ecx to hold the resolved class
*/
movl %eax,%ecx # ecx<- resolved class
movzbl rINST_HI,%eax # eax<- BA
sarl $4,%eax # eax<- B
GET_VREG(%eax,%eax) # eax<- vB (obj)
movl offObject_clazz(%eax),%eax # eax<- obj->clazz
jmp .LOP_INSTANCE_OF_resolved
/* continuation for OP_NEW_INSTANCE */
.LOP_NEW_INSTANCE_initialized: # on entry, ecx<- class
/* TODO: remove test for interface/abstract, now done in verifier */
testl $(ACC_INTERFACE|ACC_ABSTRACT),offClassObject_accessFlags(%ecx)
movl $ALLOC_DONT_TRACK,OUT_ARG1(%esp)
jne .LOP_NEW_INSTANCE_abstract
.LOP_NEW_INSTANCE_finish: # ecx=class
movl %ecx,OUT_ARG0(%esp)
call dvmAllocObject # eax<- new object
UNSPILL(rPC)
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
testl %eax,%eax # success?
je common_exceptionThrown # no, bail out
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/*
* Class initialization required.
*
* ecx holds class object
*/
.LOP_NEW_INSTANCE_needinit:
SPILL_TMP(%ecx) # save object
movl %ecx,OUT_ARG0(%esp)
call dvmInitClass # initialize class
UNSPILL_TMP(%ecx) # restore object
testl %eax,%eax # success?
jne .LOP_NEW_INSTANCE_initialized # success, continue
UNSPILL(rPC) # failed, restore PC
jmp common_exceptionThrown # go deal with init exception
/*
* Resolution required. This is the least-likely path.
*
*/
.LOP_NEW_INSTANCE_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
movl %eax,OUT_ARG1(%esp)
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
movl $0,OUT_ARG2(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveClass # call(clazz,off,flags)
movl %eax,%ecx # ecx<- resolved ClassObject ptr
testl %ecx,%ecx # success?
jne .LOP_NEW_INSTANCE_resolved # good to go
UNSPILL(rPC)
jmp common_exceptionThrown # no, handle exception
/*
* TODO: remove this
* We can't instantiate an abstract class or interface, so throw an
* InstantiationError with the class descriptor as the message.
*
* ecx holds class object
*/
.LOP_NEW_INSTANCE_abstract:
movl offClassObject_descriptor(%ecx),%eax
movl $.LstrInstantiationError,OUT_ARG0(%esp)
movl %eax,OUT_ARG1(%esp)
call dvmThrowExceptionWithClassMessage
UNSPILL(rPC)
jmp common_exceptionThrown
/* continuation for OP_NEW_ARRAY */
/*
* Resolve class. (This is an uncommon case.)
* ecx holds class (null here)
* eax holds array length (vB)
*/
.LOP_NEW_ARRAY_resolve:
GET_GLUE(%ecx)
SPILL_TMP(%eax) # save array length
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
movzwl 2(rPC),%eax # eax<- CCCC
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
movl %eax,OUT_ARG1(%esp)
movl $0,OUT_ARG2(%esp)
movl %ecx,OUT_ARG0(%esp)
SPILL(rPC)
call dvmResolveClass # eax<- call(clazz,ref,flag)
UNSPILL(rPC)
movl %eax,%ecx
UNSPILL_TMP(%eax)
testl %ecx,%ecx # successful resolution?
je common_exceptionThrown # no, bail.
# fall through to OP_NEW_ARRAY_finish
/*
* Finish allocation
*
* ecx holds class
* eax holds array length (vB)
*/
.LOP_NEW_ARRAY_finish:
movl %ecx,OUT_ARG0(%esp)
movl %eax,OUT_ARG1(%esp)
movl $ALLOC_DONT_TRACK,OUT_ARG2(%esp)
SPILL(rPC)
call dvmAllocArrayByClass # eax<- call(clazz,length,flags)
UNSPILL(rPC)
testl %eax,%eax # failed?
je common_exceptionThrown # yup - go handle
movl rINST_FULL,%ecx
FETCH_INST_WORD(2)
SET_VREG(%eax,%ecx)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_FILLED_NEW_ARRAY */
.LOP_FILLED_NEW_ARRAY_more:
movl offMethod_clazz(%eax),%eax # eax<- method->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- clazz
call dvmResolveClass # eax<- call(clazz,ref,flag)
UNSPILL(rPC)
testl %eax,%eax # null?
je common_exceptionThrown # yes, handle it
# note: fall through to .LOP_FILLED_NEW_ARRAY_continue
/*
* On entry:
* eax holds array class [r0]
* rINST_FULL holds AA or BB [r10]
* ecx is scratch
* rPC is valid, but has been spilled
*/
.LOP_FILLED_NEW_ARRAY_continue:
movl offClassObject_descriptor(%eax),%ecx # ecx<- arrayClass->descriptor
movl $ALLOC_DONT_TRACK,OUT_ARG2(%esp) # arg2<- flags
movzbl 1(%ecx),%ecx # ecx<- descriptor[1]
movl %eax,OUT_ARG0(%esp) # arg0<- arrayClass
cmpb $'I',%cl # supported?
je 1f
cmpb $'L',%cl
je 1f
cmpb $'[',%cl
jne .LOP_FILLED_NEW_ARRAY_notimpl # no, not handled yet
1:
.if (!0)
SPILL_TMP(rINST_FULL) # save copy, need "B" later
sarl $4,rINST_FULL
.endif
movl rINST_FULL,OUT_ARG1(%esp) # arg1<- A or AA (length)
call dvmAllocArrayByClass # eax<- call(arrayClass, length, flags)
UNSPILL(rPC)
GET_GLUE(%ecx)
testl %eax,%eax # alloc successful?
je common_exceptionThrown # no, handle exception
movl %eax,offGlue_retval(%ecx) # retval.l<- new array
movzwl 4(rPC),%ecx # ecx<- FEDC or CCCC
leal offArrayObject_contents(%eax),%eax # eax<- newArray->contents
/* at this point:
* eax is pointer to tgt
* rINST_FULL is length
* ecx is FEDC or CCCC
* TMP_SPILL is BA
* rPC is valid, but spilled
* We now need to copy values from registers into the array
*/
.if 0
# set up src pointer
SPILL(rFP) # esi
SPILL(rIBASE) # edi
movl %eax,%edi # set up dst ptr
leal (rFP,%ecx,4),%esi # set up src ptr
movl rINST_FULL,%ecx # load count register
FETCH_INST_WORD(3)
rep
movsd
UNSPILL(rIBASE)
UNSPILL(rFP)
.else
testl rINST_FULL,rINST_FULL
je 4f
UNSPILL_TMP(rPC)
andl $0x0f,rPC # rPC<- 0000000A
sall $16,rPC # rPC<- 000A0000
orl %ecx,rPC # rpc<- 000AFEDC
3:
movl $0xf,%ecx
andl rPC,%ecx # ecx<- next reg to load
GET_VREG(%ecx,%ecx)
shrl $4,rPC
leal 4(%eax),%eax
movl %ecx,-4(%eax)
sub $1,rINST_FULL
jne 3b
4:
UNSPILL(rPC)
FETCH_INST_WORD(3)
.endif
ADVANCE_PC(3)
GOTO_NEXT
/*
* Throw an exception indicating that we have not implemented this
* mode of filled-new-array.
*/
.LOP_FILLED_NEW_ARRAY_notimpl:
movl $.LstrInternalError,%eax
movl %eax,OUT_ARG0(%esp)
movl $.LstrFilledNewArrayNotImpl,%eax
movl %eax,OUT_ARG1(%esp)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/* continuation for OP_FILLED_NEW_ARRAY_RANGE */
.LOP_FILLED_NEW_ARRAY_RANGE_more:
movl offMethod_clazz(%eax),%eax # eax<- method->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- clazz
call dvmResolveClass # eax<- call(clazz,ref,flag)
UNSPILL(rPC)
testl %eax,%eax # null?
je common_exceptionThrown # yes, handle it
# note: fall through to .LOP_FILLED_NEW_ARRAY_RANGE_continue
/*
* On entry:
* eax holds array class [r0]
* rINST_FULL holds AA or BB [r10]
* ecx is scratch
* rPC is valid, but has been spilled
*/
.LOP_FILLED_NEW_ARRAY_RANGE_continue:
movl offClassObject_descriptor(%eax),%ecx # ecx<- arrayClass->descriptor
movl $ALLOC_DONT_TRACK,OUT_ARG2(%esp) # arg2<- flags
movzbl 1(%ecx),%ecx # ecx<- descriptor[1]
movl %eax,OUT_ARG0(%esp) # arg0<- arrayClass
cmpb $'I',%cl # supported?
je 1f
cmpb $'L',%cl
je 1f
cmpb $'[',%cl
jne .LOP_FILLED_NEW_ARRAY_RANGE_notimpl # no, not handled yet
1:
.if (!1)
SPILL_TMP(rINST_FULL) # save copy, need "B" later
sarl $4,rINST_FULL
.endif
movl rINST_FULL,OUT_ARG1(%esp) # arg1<- A or AA (length)
call dvmAllocArrayByClass # eax<- call(arrayClass, length, flags)
UNSPILL(rPC)
GET_GLUE(%ecx)
testl %eax,%eax # alloc successful?
je common_exceptionThrown # no, handle exception
movl %eax,offGlue_retval(%ecx) # retval.l<- new array
movzwl 4(rPC),%ecx # ecx<- FEDC or CCCC
leal offArrayObject_contents(%eax),%eax # eax<- newArray->contents
/* at this point:
* eax is pointer to tgt
* rINST_FULL is length
* ecx is FEDC or CCCC
* TMP_SPILL is BA
* rPC is valid, but spilled
* We now need to copy values from registers into the array
*/
.if 1
# set up src pointer
SPILL(rFP) # esi
SPILL(rIBASE) # edi
movl %eax,%edi # set up dst ptr
leal (rFP,%ecx,4),%esi # set up src ptr
movl rINST_FULL,%ecx # load count register
FETCH_INST_WORD(3)
rep
movsd
UNSPILL(rIBASE)
UNSPILL(rFP)
.else
testl rINST_FULL,rINST_FULL
je 4f
UNSPILL_TMP(rPC)
andl $0x0f,rPC # rPC<- 0000000A
sall $16,rPC # rPC<- 000A0000
orl %ecx,rPC # rpc<- 000AFEDC
3:
movl $0xf,%ecx
andl rPC,%ecx # ecx<- next reg to load
GET_VREG(%ecx,%ecx)
shrl $4,rPC
leal 4(%eax),%eax
movl %ecx,-4(%eax)
sub $1,rINST_FULL
jne 3b
4:
UNSPILL(rPC)
FETCH_INST_WORD(3)
.endif
ADVANCE_PC(3)
GOTO_NEXT
/*
* Throw an exception indicating that we have not implemented this
* mode of filled-new-array.
*/
.LOP_FILLED_NEW_ARRAY_RANGE_notimpl:
movl $.LstrInternalError,%eax
movl %eax,OUT_ARG0(%esp)
movl $.LstrFilledNewArrayNotImpl,%eax
movl %eax,OUT_ARG1(%esp)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/* continuation for OP_CMPL_FLOAT */
.LOP_CMPL_FLOAT_isNaN:
movl $-1,%ecx
jmp .LOP_CMPL_FLOAT_finish
/* continuation for OP_CMPG_FLOAT */
.LOP_CMPG_FLOAT_isNaN:
movl $1,%ecx
jmp .LOP_CMPG_FLOAT_finish
/* continuation for OP_CMPL_DOUBLE */
.LOP_CMPL_DOUBLE_isNaN:
movl $-1,%ecx
jmp .LOP_CMPL_DOUBLE_finish
/* continuation for OP_CMPG_DOUBLE */
.LOP_CMPG_DOUBLE_isNaN:
movl $1,%ecx
jmp .LOP_CMPG_DOUBLE_finish
/* continuation for OP_CMP_LONG */
.LOP_CMP_LONG_bigger:
UNSPILL(rPC)
movl $1,%ecx
jmp .LOP_CMP_LONG_finish
.LOP_CMP_LONG_smaller:
UNSPILL(rPC)
movl $-1,%ecx
.LOP_CMP_LONG_finish:
SET_VREG(%ecx,rINST_FULL)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_AGET_WIDE */
.LOP_AGET_WIDE_finish:
leal offArrayObject_contents(%eax,%ecx,8),%eax
movl (%eax),%ecx
movl 4(%eax),%eax
SET_VREG_WORD(%ecx,rINST_FULL,0)
SET_VREG_WORD(%eax,rINST_FULL,1)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_APUT_WIDE */
.LOP_APUT_WIDE_finish:
leal offArrayObject_contents(%eax,%ecx,8),%eax
GET_VREG_WORD(%ecx,rINST_FULL,0)
GET_VREG_WORD(rINST_FULL,rINST_FULL,1)
movl rINST_FULL,4(%eax)
FETCH_INST_WORD(2)
movl %ecx,(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_APUT_OBJECT */
/* On entry:
* eax<- array object
* ecx<- index
* rINST_FULL<- vAA
*/
.LOP_APUT_OBJECT_continue:
leal offArrayObject_contents(%eax,%ecx,4),%ecx
testl rINST_FULL,rINST_FULL # storing null reference?
je .LOP_APUT_OBJECT_skip_check
SPILL(rPC)
SPILL_TMP(%ecx)
movl offObject_clazz(%eax),%eax # eax<- arrayObj->clazz
movl offObject_clazz(rINST_FULL),%ecx # ecx<- obj->clazz
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmCanPutArrayElement # test object type vs. array type
UNSPILL(rPC)
UNSPILL_TMP(%ecx)
testl %eax,%eax
je common_errArrayStore
.LOP_APUT_OBJECT_skip_check:
movl rINST_FULL,(%ecx)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IGET */
.LOP_IGET_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IGET_finish
jmp common_exceptionThrown
.LOP_IGET_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movl (%ecx,%eax,1),%ecx # ecx<- obj.field (8/16/32 bits)
movl rINST_FULL,%eax # eax<- A
FETCH_INST_WORD(2)
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IGET_WIDE */
.LOP_IGET_WIDE_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IGET_WIDE_finish
jmp common_exceptionThrown
.LOP_IGET_WIDE_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
leal (%ecx,%eax,1),%eax # eax<- address of field
movl (%eax),%ecx # ecx<- lsw
movl 4(%eax),%eax # eax<- msw
SET_VREG_WORD(%ecx,rINST_FULL,0)
SET_VREG_WORD(%eax,rINST_FULL,1)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IGET_OBJECT */
.LOP_IGET_OBJECT_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IGET_OBJECT_finish
jmp common_exceptionThrown
.LOP_IGET_OBJECT_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movl (%ecx,%eax,1),%ecx # ecx<- obj.field (8/16/32 bits)
movl rINST_FULL,%eax # eax<- A
FETCH_INST_WORD(2)
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IGET_BOOLEAN */
.LOP_IGET_BOOLEAN_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IGET_BOOLEAN_finish
jmp common_exceptionThrown
.LOP_IGET_BOOLEAN_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movzbl (%ecx,%eax,1),%ecx # ecx<- obj.field (8/16/32 bits)
movl rINST_FULL,%eax # eax<- A
FETCH_INST_WORD(2)
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IGET_BYTE */
.LOP_IGET_BYTE_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IGET_BYTE_finish
jmp common_exceptionThrown
.LOP_IGET_BYTE_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movsbl (%ecx,%eax,1),%ecx # ecx<- obj.field (8/16/32 bits)
movl rINST_FULL,%eax # eax<- A
FETCH_INST_WORD(2)
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IGET_CHAR */
.LOP_IGET_CHAR_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IGET_CHAR_finish
jmp common_exceptionThrown
.LOP_IGET_CHAR_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movzwl (%ecx,%eax,1),%ecx # ecx<- obj.field (8/16/32 bits)
movl rINST_FULL,%eax # eax<- A
FETCH_INST_WORD(2)
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IGET_SHORT */
.LOP_IGET_SHORT_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IGET_SHORT_finish
jmp common_exceptionThrown
.LOP_IGET_SHORT_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movswl (%ecx,%eax,1),%ecx # ecx<- obj.field (8/16/32 bits)
movl rINST_FULL,%eax # eax<- A
FETCH_INST_WORD(2)
SET_VREG(%ecx,%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IPUT */
.LOP_IPUT_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IPUT_finish
jmp common_exceptionThrown
.LOP_IPUT_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movl rINST_FULL,(%ecx,%eax,1) # obj.field <- v[A](8/16/32 bits)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IPUT_WIDE */
.LOP_IPUT_WIDE_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IPUT_WIDE_finish
jmp common_exceptionThrown
.LOP_IPUT_WIDE_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
leal (%ecx,%eax,1),%eax # eax<- address of field
GET_VREG_WORD(%ecx,rINST_FULL,0) # ecx<- lsw
GET_VREG_WORD(rINST_FULL,rINST_FULL,1) # rINST_FULL<- msw
movl rINST_FULL,4(%eax)
FETCH_INST_WORD(2)
movl %ecx,(%eax)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IPUT_OBJECT */
.LOP_IPUT_OBJECT_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IPUT_OBJECT_finish
jmp common_exceptionThrown
.LOP_IPUT_OBJECT_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movl rINST_FULL,(%ecx,%eax,1) # obj.field <- v[A](8/16/32 bits)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IPUT_BOOLEAN */
.LOP_IPUT_BOOLEAN_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IPUT_BOOLEAN_finish
jmp common_exceptionThrown
.LOP_IPUT_BOOLEAN_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movb rINST_LO,(%ecx,%eax,1) # obj.field <- v[A](8/16/32 bits)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IPUT_BYTE */
.LOP_IPUT_BYTE_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IPUT_BYTE_finish
jmp common_exceptionThrown
.LOP_IPUT_BYTE_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movb rINST_LO,(%ecx,%eax,1) # obj.field <- v[A](8/16/32 bits)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IPUT_CHAR */
.LOP_IPUT_CHAR_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IPUT_CHAR_finish
jmp common_exceptionThrown
.LOP_IPUT_CHAR_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movw rINST,(%ecx,%eax,1) # obj.field <- v[A](8/16/32 bits)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_IPUT_SHORT */
.LOP_IPUT_SHORT_resolve:
EXPORT_PC()
SPILL(rPC)
movl offGlue_method(rIBASE),rPC # rPC<- current method
UNSPILL(rIBASE)
movl offMethod_clazz(rPC),rPC # rPC<- method->clazz
SPILL_TMP(%ecx) # save object pointer across call
movl rPC,OUT_ARG0(%esp) # pass in method->clazz
call dvmResolveInstField # ... to dvmResolveInstField
UNSPILL_TMP(%ecx)
UNSPILL(rPC)
testl %eax,%eax # ... which returns InstrField ptr
jne .LOP_IPUT_SHORT_finish
jmp common_exceptionThrown
.LOP_IPUT_SHORT_finish:
/*
* Currently:
* eax holds resolved field
* ecx holds object
* rIBASE is scratch, but needs to be unspilled
* rINST_FULL holds A
*/
GET_VREG(rINST_FULL,rINST_FULL) # rINST_FULL<- v[A]
movl offInstField_byteOffset(%eax),%eax # eax<- byte offset of field
UNSPILL(rIBASE)
testl %ecx,%ecx # object null?
je common_errNullObject # object was null
movw rINST,(%ecx,%eax,1) # obj.field <- v[A](8/16/32 bits)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_SGET */
/*
* Go resolve the field
*/
.LOP_SGET_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SGET_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SGET_WIDE */
/*
* Go resolve the field
*/
.LOP_SGET_WIDE_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SGET_WIDE_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SGET_OBJECT */
/*
* Go resolve the field
*/
.LOP_SGET_OBJECT_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SGET_OBJECT_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SGET_BOOLEAN */
/*
* Go resolve the field
*/
.LOP_SGET_BOOLEAN_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SGET_BOOLEAN_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SGET_BYTE */
/*
* Go resolve the field
*/
.LOP_SGET_BYTE_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SGET_BYTE_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SGET_CHAR */
/*
* Go resolve the field
*/
.LOP_SGET_CHAR_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SGET_CHAR_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SGET_SHORT */
/*
* Go resolve the field
*/
.LOP_SGET_SHORT_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SGET_SHORT_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SPUT */
/*
* Go resolve the field
*/
.LOP_SPUT_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SPUT_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SPUT_WIDE */
/*
* Go resolve the field
*/
.LOP_SPUT_WIDE_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SPUT_WIDE_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SPUT_OBJECT */
/*
* Go resolve the field
*/
.LOP_SPUT_OBJECT_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SPUT_OBJECT_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SPUT_BOOLEAN */
/*
* Go resolve the field
*/
.LOP_SPUT_BOOLEAN_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SPUT_BOOLEAN_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SPUT_BYTE */
/*
* Go resolve the field
*/
.LOP_SPUT_BYTE_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SPUT_BYTE_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SPUT_CHAR */
/*
* Go resolve the field
*/
.LOP_SPUT_CHAR_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SPUT_CHAR_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_SPUT_SHORT */
/*
* Go resolve the field
*/
.LOP_SPUT_SHORT_resolve:
GET_GLUE(%ecx)
movzwl 2(rPC),%eax # eax<- field ref BBBB
movl offGlue_method(%ecx),%ecx # ecx<- current method
EXPORT_PC() # could throw, need to export
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
SPILL(rPC)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveStaticField # eax<- resolved StaticField ptr
UNSPILL(rPC)
testl %eax,%eax
jne .LOP_SPUT_SHORT_finish # success, continue
jmp common_exceptionThrown # no, handle exception
/* continuation for OP_INVOKE_VIRTUAL */
.LOP_INVOKE_VIRTUAL_more:
movl offMethod_clazz(%eax),%eax # ecx<- method->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- clazz
movl $METHOD_VIRTUAL,OUT_ARG2(%esp) # arg2<- flags
call dvmResolveMethod # eax<- call(clazz, ref, flags)
UNSPILL(rPC)
testl %eax,%eax # got null?
jne .LOP_INVOKE_VIRTUAL_continue # no, continue
jmp common_exceptionThrown # yes, handle exception
/* At this point:
* eax = resolved base method
* ecx = scratch
*/
.LOP_INVOKE_VIRTUAL_continue:
movzwl 4(rPC),%ecx # ecx<- GFED or CCCC
.if (!0)
andl $0xf,%ecx # ecx<- D (or stays CCCC)
.endif
GET_VREG(%ecx,%ecx) # ecx<- "this"
movzwl offMethod_methodIndex(%eax),%eax # eax<- baseMethod->methodIndex
testl %ecx,%ecx # null this?
je common_errNullObject # go if so
movl offObject_clazz(%ecx),%ecx # ecx<- thisPtr->clazz
movl offClassObject_vtable(%ecx),%ecx # ecx<- thisPtr->clazz->vtable
movl (%ecx,%eax,4),%eax # eax<- vtable[methodIndex]
jmp common_invokeMethodNoRange
/* continuation for OP_INVOKE_SUPER */
/*
* At this point:
* ecx = resolved base method [r0]
* eax = method->clazz [r9]
*/
.LOP_INVOKE_SUPER_continue:
movl offClassObject_super(%eax),%eax # eax<- method->clazz->super
movzwl offMethod_methodIndex(%ecx),%ecx # ecx<- baseMthod->methodIndex
cmpl offClassObject_vtableCount(%eax),%ecx # compare(methodIndex,vtableCount)
jae .LOP_INVOKE_SUPER_nsm # method not present in superclass
movl offClassObject_vtable(%eax),%eax # eax<- ...clazz->super->vtable
movl (%eax,%ecx,4),%eax # eax<- vtable[methodIndex]
jmp common_invokeMethodNoRange
/* At this point:
* ecx = null (needs to be resolved base method)
* eax = method->clazz
*/
.LOP_INVOKE_SUPER_resolve:
SPILL_TMP(%eax) # method->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- method->clazz
movzwl 2(rPC),%ecx # ecx<- BBBB
movl $METHOD_VIRTUAL,OUT_ARG2(%esp) # arg2<- resolver method type
movl %ecx,OUT_ARG1(%esp) # arg1<- ref
SPILL(rPC)
call dvmResolveMethod # eax<- call(clazz, ref, flags)
UNSPILL(rPC)
testl %eax,%eax # got null?
movl %eax,%ecx # ecx<- resolved base method
UNSPILL_TMP(%eax) # restore method->clazz
jne .LOP_INVOKE_SUPER_continue # good to go - continue
jmp common_exceptionThrown # handle exception
/*
* Throw a NoSuchMethodError with the method name as the message.
* ecx = resolved base method
*/
.LOP_INVOKE_SUPER_nsm:
movl offMethod_name(%ecx),%eax
mov %eax,OUT_ARG1(%esp)
jmp common_errNoSuchMethod
/* continuation for OP_INVOKE_DIRECT */
/*
* On entry:
* TMP_SPILL <- "this" register
* Things a bit ugly on this path, but it's the less
* frequent one. We'll have to do some reloading.
*/
.LOP_INVOKE_DIRECT_resolve:
SPILL_TMP(%ecx)
GET_GLUE(%ecx)
UNSPILL(rPC)
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
movzwl 2(rPC),%eax # reference (BBBB or CCCC)
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
movl $METHOD_DIRECT,OUT_ARG2(%esp)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveMethod # eax<- call(clazz, ref, flags)
UNSPILL_TMP(%ecx)
testl %eax,%eax
jne .LOP_INVOKE_DIRECT_finish
UNSPILL(rPC)
jmp common_exceptionThrown
/* continuation for OP_INVOKE_STATIC */
.LOP_INVOKE_STATIC_continue:
movl $METHOD_STATIC,%eax
movl %eax,OUT_ARG2(%esp) # arg2<- flags
SPILL(rPC)
call dvmResolveMethod # call(clazz,ref,flags)
UNSPILL(rPC)
testl %eax,%eax # got null?
jne common_invokeMethodNoRange
jmp common_exceptionThrown
/* continuation for OP_INVOKE_INTERFACE */
.LOP_INVOKE_INTERFACE_continue:
call dvmFindInterfaceMethodInCache # eax<- call(class, ref, method, dex)
UNSPILL(rPC)
testl %eax,%eax
je common_exceptionThrown
jmp common_invokeMethodNoRange
/* continuation for OP_INVOKE_VIRTUAL_RANGE */
.LOP_INVOKE_VIRTUAL_RANGE_more:
movl offMethod_clazz(%eax),%eax # ecx<- method->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- clazz
movl $METHOD_VIRTUAL,OUT_ARG2(%esp) # arg2<- flags
call dvmResolveMethod # eax<- call(clazz, ref, flags)
UNSPILL(rPC)
testl %eax,%eax # got null?
jne .LOP_INVOKE_VIRTUAL_RANGE_continue # no, continue
jmp common_exceptionThrown # yes, handle exception
/* At this point:
* eax = resolved base method
* ecx = scratch
*/
.LOP_INVOKE_VIRTUAL_RANGE_continue:
movzwl 4(rPC),%ecx # ecx<- GFED or CCCC
.if (!1)
andl $0xf,%ecx # ecx<- D (or stays CCCC)
.endif
GET_VREG(%ecx,%ecx) # ecx<- "this"
movzwl offMethod_methodIndex(%eax),%eax # eax<- baseMethod->methodIndex
testl %ecx,%ecx # null this?
je common_errNullObject # go if so
movl offObject_clazz(%ecx),%ecx # ecx<- thisPtr->clazz
movl offClassObject_vtable(%ecx),%ecx # ecx<- thisPtr->clazz->vtable
movl (%ecx,%eax,4),%eax # eax<- vtable[methodIndex]
jmp common_invokeMethodRange
/* continuation for OP_INVOKE_SUPER_RANGE */
/*
* At this point:
* ecx = resolved base method [r0]
* eax = method->clazz [r9]
*/
.LOP_INVOKE_SUPER_RANGE_continue:
movl offClassObject_super(%eax),%eax # eax<- method->clazz->super
movzwl offMethod_methodIndex(%ecx),%ecx # ecx<- baseMthod->methodIndex
cmpl offClassObject_vtableCount(%eax),%ecx # compare(methodIndex,vtableCount)
jae .LOP_INVOKE_SUPER_RANGE_nsm # method not present in superclass
movl offClassObject_vtable(%eax),%eax # eax<- ...clazz->super->vtable
movl (%eax,%ecx,4),%eax # eax<- vtable[methodIndex]
jmp common_invokeMethodRange
/* At this point:
* ecx = null (needs to be resolved base method)
* eax = method->clazz
*/
.LOP_INVOKE_SUPER_RANGE_resolve:
SPILL_TMP(%eax) # method->clazz
movl %eax,OUT_ARG0(%esp) # arg0<- method->clazz
movzwl 2(rPC),%ecx # ecx<- BBBB
movl $METHOD_VIRTUAL,OUT_ARG2(%esp) # arg2<- resolver method type
movl %ecx,OUT_ARG1(%esp) # arg1<- ref
SPILL(rPC)
call dvmResolveMethod # eax<- call(clazz, ref, flags)
UNSPILL(rPC)
testl %eax,%eax # got null?
movl %eax,%ecx # ecx<- resolved base method
UNSPILL_TMP(%eax) # restore method->clazz
jne .LOP_INVOKE_SUPER_RANGE_continue # good to go - continue
jmp common_exceptionThrown # handle exception
/*
* Throw a NoSuchMethodError with the method name as the message.
* ecx = resolved base method
*/
.LOP_INVOKE_SUPER_RANGE_nsm:
movl offMethod_name(%ecx),%eax
mov %eax,OUT_ARG1(%esp)
jmp common_errNoSuchMethod
/* continuation for OP_INVOKE_DIRECT_RANGE */
/*
* On entry:
* TMP_SPILL <- "this" register
* Things a bit ugly on this path, but it's the less
* frequent one. We'll have to do some reloading.
*/
.LOP_INVOKE_DIRECT_RANGE_resolve:
SPILL_TMP(%ecx)
GET_GLUE(%ecx)
UNSPILL(rPC)
movl offGlue_method(%ecx),%ecx # ecx<- glue->method
movzwl 2(rPC),%eax # reference (BBBB or CCCC)
movl offMethod_clazz(%ecx),%ecx # ecx<- method->clazz
movl $METHOD_DIRECT,OUT_ARG2(%esp)
movl %eax,OUT_ARG1(%esp)
movl %ecx,OUT_ARG0(%esp)
call dvmResolveMethod # eax<- call(clazz, ref, flags)
UNSPILL_TMP(%ecx)
testl %eax,%eax
jne .LOP_INVOKE_DIRECT_RANGE_finish
UNSPILL(rPC)
jmp common_exceptionThrown
/* continuation for OP_INVOKE_STATIC_RANGE */
.LOP_INVOKE_STATIC_RANGE_continue:
movl $METHOD_STATIC,%eax
movl %eax,OUT_ARG2(%esp) # arg2<- flags
SPILL(rPC)
call dvmResolveMethod # call(clazz,ref,flags)
UNSPILL(rPC)
testl %eax,%eax # got null?
jne common_invokeMethodRange
jmp common_exceptionThrown
/* continuation for OP_INVOKE_INTERFACE_RANGE */
.LOP_INVOKE_INTERFACE_RANGE_continue:
call dvmFindInterfaceMethodInCache # eax<- call(class, ref, method, dex)
UNSPILL(rPC)
testl %eax,%eax
je common_exceptionThrown
jmp common_invokeMethodRange
/* continuation for OP_FLOAT_TO_INT */
.LOP_FLOAT_TO_INT_continue:
.if 0
movl $0x80000000,%eax
xorl 4(rFP,%ecx,4),%eax
orl (rFP,%ecx,4),%eax
.else
cmpl $0x80000000,(rFP,%ecx,4)
.endif
je .LOP_FLOAT_TO_INT_special_case # fix up result
.LOP_FLOAT_TO_INT_finish:
ADVANCE_PC(1)
GOTO_NEXT
.LOP_FLOAT_TO_INT_special_case:
fnstsw %ax
sahf
jp .LOP_FLOAT_TO_INT_isNaN
adcl $-1,(rFP,%ecx,4)
.if 0
adcl $-1,4(rFP,%ecx,4)
.endif
jmp .LOP_FLOAT_TO_INT_finish
.LOP_FLOAT_TO_INT_isNaN:
movl $0,(rFP,%ecx,4)
.if 0
movl $0,4(rFP,%ecx,4)
.endif
jmp .LOP_FLOAT_TO_INT_finish
/* continuation for OP_FLOAT_TO_LONG */
.LOP_FLOAT_TO_LONG_continue:
.if 1
movl $0x80000000,%eax
xorl 4(rFP,%ecx,4),%eax
orl (rFP,%ecx,4),%eax
.else
cmpl $0x80000000,(rFP,%ecx,4)
.endif
je .LOP_FLOAT_TO_LONG_special_case # fix up result
.LOP_FLOAT_TO_LONG_finish:
ADVANCE_PC(1)
GOTO_NEXT
.LOP_FLOAT_TO_LONG_special_case:
fnstsw %ax
sahf
jp .LOP_FLOAT_TO_LONG_isNaN
adcl $-1,(rFP,%ecx,4)
.if 1
adcl $-1,4(rFP,%ecx,4)
.endif
jmp .LOP_FLOAT_TO_LONG_finish
.LOP_FLOAT_TO_LONG_isNaN:
movl $0,(rFP,%ecx,4)
.if 1
movl $0,4(rFP,%ecx,4)
.endif
jmp .LOP_FLOAT_TO_LONG_finish
/* continuation for OP_DOUBLE_TO_INT */
.LOP_DOUBLE_TO_INT_continue:
.if 0
movl $0x80000000,%eax
xorl 4(rFP,%ecx,4),%eax
orl (rFP,%ecx,4),%eax
.else
cmpl $0x80000000,(rFP,%ecx,4)
.endif
je .LOP_DOUBLE_TO_INT_special_case # fix up result
.LOP_DOUBLE_TO_INT_finish:
ADVANCE_PC(1)
GOTO_NEXT
.LOP_DOUBLE_TO_INT_special_case:
fnstsw %ax
sahf
jp .LOP_DOUBLE_TO_INT_isNaN
adcl $-1,(rFP,%ecx,4)
.if 0
adcl $-1,4(rFP,%ecx,4)
.endif
jmp .LOP_DOUBLE_TO_INT_finish
.LOP_DOUBLE_TO_INT_isNaN:
movl $0,(rFP,%ecx,4)
.if 0
movl $0,4(rFP,%ecx,4)
.endif
jmp .LOP_DOUBLE_TO_INT_finish
/* continuation for OP_DOUBLE_TO_LONG */
.LOP_DOUBLE_TO_LONG_continue:
.if 1
movl $0x80000000,%eax
xorl 4(rFP,%ecx,4),%eax
orl (rFP,%ecx,4),%eax
.else
cmpl $0x80000000,(rFP,%ecx,4)
.endif
je .LOP_DOUBLE_TO_LONG_special_case # fix up result
.LOP_DOUBLE_TO_LONG_finish:
ADVANCE_PC(1)
GOTO_NEXT
.LOP_DOUBLE_TO_LONG_special_case:
fnstsw %ax
sahf
jp .LOP_DOUBLE_TO_LONG_isNaN
adcl $-1,(rFP,%ecx,4)
.if 1
adcl $-1,4(rFP,%ecx,4)
.endif
jmp .LOP_DOUBLE_TO_LONG_finish
.LOP_DOUBLE_TO_LONG_isNaN:
movl $0,(rFP,%ecx,4)
.if 1
movl $0,4(rFP,%ecx,4)
.endif
jmp .LOP_DOUBLE_TO_LONG_finish
/* continuation for OP_DIV_INT */
.LOP_DIV_INT_continue_div:
cltd
idivl %ecx
.LOP_DIV_INT_finish_div:
movzbl rINST_HI,%ecx # ecl<- AA
SET_VREG(%eax,%ecx)
UNSPILL(rPC)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_REM_INT */
.LOP_REM_INT_continue_div:
cltd
idivl %ecx
.LOP_REM_INT_finish_div:
movzbl rINST_HI,%ecx # ecl<- AA
SET_VREG(%edx,%ecx)
UNSPILL(rPC)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_MUL_LONG */
.LOP_MUL_LONG_continue:
leal (%ecx,%edx),%edx # full result now in %edx:%eax
movzbl rINST_HI,%ecx # ecx<- A
movl %edx,4(rFP,%ecx,4) # v[B+1]<- %edx
UNSPILL(rPC) # restore rPC/%edx
FETCH_INST_WORD(2)
UNSPILL(rIBASE)
movl %eax,(rFP,%ecx,4) # v[B]<- %eax
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_DIV_LONG */
.LOP_DIV_LONG_continue:
call __divdi3
.LOP_DIV_LONG_finish:
movzbl rINST_HI,%ecx
SET_VREG_WORD(rPC,%ecx,1)
UNSPILL(rPC)
SET_VREG_WORD(%eax,%ecx,0)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
.LOP_DIV_LONG_check_zero:
testl rPC,rPC
jne .LOP_DIV_LONG_notSpecial
UNSPILL(rPC)
jmp common_errDivideByZero
.LOP_DIV_LONG_check_neg1:
testl rPC,%eax
jne .LOP_DIV_LONG_notSpecial
GET_VREG_WORD(rPC,%ecx,0)
GET_VREG_WORD(%ecx,%ecx,1)
testl rPC,rPC
jne .LOP_DIV_LONG_notSpecial1
cmpl $0x80000000,%ecx
jne .LOP_DIV_LONG_notSpecial1
/* minint / -1, return minint on div, 0 on rem */
xorl %eax,%eax
movl $0x80000000,%edx
jmp .LOP_DIV_LONG_finish
/* continuation for OP_REM_LONG */
.LOP_REM_LONG_continue:
call __moddi3
.LOP_REM_LONG_finish:
movzbl rINST_HI,%ecx
SET_VREG_WORD(rPC,%ecx,1)
UNSPILL(rPC)
SET_VREG_WORD(%eax,%ecx,0)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
.LOP_REM_LONG_check_zero:
testl rPC,rPC
jne .LOP_REM_LONG_notSpecial
UNSPILL(rPC)
jmp common_errDivideByZero
.LOP_REM_LONG_check_neg1:
testl rPC,%eax
jne .LOP_REM_LONG_notSpecial
GET_VREG_WORD(rPC,%ecx,0)
GET_VREG_WORD(%ecx,%ecx,1)
testl rPC,rPC
jne .LOP_REM_LONG_notSpecial1
cmpl $0x80000000,%ecx
jne .LOP_REM_LONG_notSpecial1
/* minint / -1, return minint on div, 0 on rem */
xorl %eax,%eax
movl $0,%edx
jmp .LOP_REM_LONG_finish
/* continuation for OP_SHL_LONG */
.LOP_SHL_LONG_finish:
SET_VREG_WORD(%eax,%ecx,0) # v[AA+0]<- %eax
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_SHR_LONG */
.LOP_SHR_LONG_finish:
SET_VREG_WORD(%eax,%ecx,0) # v[AA+0]<- eax
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_USHR_LONG */
.LOP_USHR_LONG_finish:
SET_VREG_WORD(%eax,%ecx,0) # v[BB+0]<- eax
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_DIV_INT_2ADDR */
.LOP_DIV_INT_2ADDR_continue_div2addr:
cltd
idivl %ecx
.LOP_DIV_INT_2ADDR_finish_div2addr:
SET_VREG(%eax,rINST_FULL)
UNSPILL(rPC)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* continuation for OP_REM_INT_2ADDR */
.LOP_REM_INT_2ADDR_continue_div2addr:
cltd
idivl %ecx
.LOP_REM_INT_2ADDR_finish_div2addr:
SET_VREG(%edx,rINST_FULL)
UNSPILL(rPC)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* continuation for OP_MUL_LONG_2ADDR */
.LOP_MUL_LONG_2ADDR_continue:
leal (%ecx,%edx),%edx # full result now in %edx:%eax
movl %edx,4(rIBASE) # v[A+1]<- %edx
UNSPILL(rPC) # restore rPC/%edx
FETCH_INST_WORD(1)
movl %eax,(rIBASE) # v[A]<- %eax
UNSPILL(rFP)
UNSPILL(rIBASE)
ADVANCE_PC(1)
GOTO_NEXT
/* continuation for OP_DIV_LONG_2ADDR */
.LOP_DIV_LONG_2ADDR_continue:
movl %eax,OUT_ARG3(%esp)
movl rPC,OUT_ARG0(%esp)
movl %ecx,OUT_ARG1(%esp)
call __divdi3
.LOP_DIV_LONG_2ADDR_finish:
movl rINST_FULL,%ecx
SET_VREG_WORD(rPC,%ecx,1)
UNSPILL(rPC)
SET_VREG_WORD(%eax,%ecx,0)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
.LOP_DIV_LONG_2ADDR_check_zero:
testl rPC,rPC
jne .LOP_DIV_LONG_2ADDR_notSpecial
UNSPILL(rPC)
jmp common_errDivideByZero
.LOP_DIV_LONG_2ADDR_check_neg1:
testl rPC,%eax
jne .LOP_DIV_LONG_2ADDR_notSpecial
GET_VREG_WORD(rPC,rINST_FULL,0)
GET_VREG_WORD(%ecx,rINST_FULL,1)
testl rPC,rPC
jne .LOP_DIV_LONG_2ADDR_notSpecial1
cmpl $0x80000000,%ecx
jne .LOP_DIV_LONG_2ADDR_notSpecial1
/* minint / -1, return minint on div, 0 on rem */
xorl %eax,%eax
movl $0x80000000,%edx
jmp .LOP_DIV_LONG_2ADDR_finish
/* continuation for OP_REM_LONG_2ADDR */
.LOP_REM_LONG_2ADDR_continue:
movl %eax,OUT_ARG3(%esp)
movl rPC,OUT_ARG0(%esp)
movl %ecx,OUT_ARG1(%esp)
call __moddi3
.LOP_REM_LONG_2ADDR_finish:
movl rINST_FULL,%ecx
SET_VREG_WORD(rPC,%ecx,1)
UNSPILL(rPC)
SET_VREG_WORD(%eax,%ecx,0)
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
.LOP_REM_LONG_2ADDR_check_zero:
testl rPC,rPC
jne .LOP_REM_LONG_2ADDR_notSpecial
UNSPILL(rPC)
jmp common_errDivideByZero
.LOP_REM_LONG_2ADDR_check_neg1:
testl rPC,%eax
jne .LOP_REM_LONG_2ADDR_notSpecial
GET_VREG_WORD(rPC,rINST_FULL,0)
GET_VREG_WORD(%ecx,rINST_FULL,1)
testl rPC,rPC
jne .LOP_REM_LONG_2ADDR_notSpecial1
cmpl $0x80000000,%ecx
jne .LOP_REM_LONG_2ADDR_notSpecial1
/* minint / -1, return minint on div, 0 on rem */
xorl %eax,%eax
movl $0,%edx
jmp .LOP_REM_LONG_2ADDR_finish
/* continuation for OP_SHL_LONG_2ADDR */
.LOP_SHL_LONG_2ADDR_finish:
SET_VREG_WORD(%eax,rINST_FULL,0) # v[AA+0]<- eax
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* continuation for OP_SHR_LONG_2ADDR */
.LOP_SHR_LONG_2ADDR_finish:
SET_VREG_WORD(%eax,rINST_FULL,0) # v[AA+0]<- eax
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* continuation for OP_USHR_LONG_2ADDR */
.LOP_USHR_LONG_2ADDR_finish:
SET_VREG_WORD(%eax,rINST_FULL,0) # v[AA+0]<- eax
FETCH_INST_WORD(1)
ADVANCE_PC(1)
GOTO_NEXT
/* continuation for OP_DIV_INT_LIT16 */
.LOP_DIV_INT_LIT16_continue_div:
cltd
idivl %ecx
.LOP_DIV_INT_LIT16_finish_div:
SET_VREG(%eax,rINST_FULL)
UNSPILL(rPC)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_REM_INT_LIT16 */
.LOP_REM_INT_LIT16_continue_div:
cltd
idivl %ecx
.LOP_REM_INT_LIT16_finish_div:
SET_VREG(%edx,rINST_FULL)
UNSPILL(rPC)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_DIV_INT_LIT8 */
.LOP_DIV_INT_LIT8_continue_div:
cltd
idivl %ecx
.LOP_DIV_INT_LIT8_finish_div:
SET_VREG(%eax,rINST_FULL)
UNSPILL(rPC)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_REM_INT_LIT8 */
.LOP_REM_INT_LIT8_continue_div:
cltd
idivl %ecx
.LOP_REM_INT_LIT8_finish_div:
SET_VREG(%edx,rINST_FULL)
UNSPILL(rPC)
FETCH_INST_WORD(2)
ADVANCE_PC(2)
GOTO_NEXT
/* continuation for OP_EXECUTE_INLINE */
.LOP_EXECUTE_INLINE_continue:
/*
* Extract args, call function.
* ecx = #of args (0-4)
* eax = call index
* @esp = return addr
* esp is -4 from normal
*
* Go ahead and load all 4 args, even if not used.
*/
movzwl 4(rPC),rPC
movl $0xf,%ecx
andl rPC,%ecx
GET_VREG(%ecx,%ecx)
sarl $4,rPC
movl %ecx,4+OUT_ARG0(%esp)
movl $0xf,%ecx
andl rPC,%ecx
GET_VREG(%ecx,%ecx)
sarl $4,rPC
movl %ecx,4+OUT_ARG1(%esp)
movl $0xf,%ecx
andl rPC,%ecx
GET_VREG(%ecx,%ecx)
sarl $4,rPC
movl %ecx,4+OUT_ARG2(%esp)
movl $0xf,%ecx
andl rPC,%ecx
GET_VREG(%ecx,%ecx)
sarl $4,rPC
movl %ecx,4+OUT_ARG3(%esp)
sall $4,%eax # index *= sizeof(table entry)
jmp *gDvmInlineOpsTable(%eax)
# will return to caller of .LOP_EXECUTE_INLINE_continue
.size dvmAsmSisterStart, .-dvmAsmSisterStart
.global dvmAsmSisterEnd
dvmAsmSisterEnd:
/* File: x86/entry.S */
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
.text
.global dvmMterpStdRun
.type dvmMterpStdRun, %function
/*
* bool dvmMterpStdRun(MterpGlue* glue)
*
* Interpreter entry point. Returns changeInterp.
*
*/
dvmMterpStdRun:
push %ebp
movl %esp,%ebp
push %edi
push %esi
push %ebx
/* at this point, stack is misaligned by 1 word
We're allocating spill space for 6 words, plus
outgoing argument (5 words) and local variables
(4 words) - 15 words or 60 bytes total. See
diagram in header.S
*/
subl $60,%esp
/* Set up "named" registers */
movl IN_ARG0(%ebp),%ecx
movl %ecx,rGLUE_SPILL(%ebp)
LOAD_PC_FROM_GLUE(%ecx)
LOAD_FP_FROM_GLUE(%ecx)
movl $dvmAsmInstructionStart,rIBASE
/* Remember %esp for future "longjmp" */
movl %esp,offGlue_bailPtr(%ecx)
/* How to start? */
movb offGlue_entryPoint(%ecx),%al
/* Normal start? */
cmpb $kInterpEntryInstr,%al
jne .Lnot_instr
/* Normal case: start executing the instruction at rPC */
FETCH_INST()
GOTO_NEXT
.Lnot_instr:
/* Reset to normal case */
movb $kInterpEntryInstr,offGlue_entryPoint(%ecx)
cmpb $kInterpEntryReturn,%al
je common_returnFromMethod
cmpb $kInterpEntryThrow,%al
je common_exceptionThrown
movzx %al,%eax
movl %eax,OUT_ARG1(%esp)
movl $.LstrBadEntryPoint,OUT_ARG0(%esp)
call printf
call dvmAbort
/* Not reached */
.global dvmMterpStdBail
.type dvmMterpStdBail, %function
/*
* void dvmMterpStdBail(MterpGlue* glue, bool changeInterp)
*
* Restore the stack pointer and PC from the save point established on entry.
* This is essentially the same as a longjmp, but should be cheaper. The
* last instruction causes us to return to whoever called dvmMterpStdRun.
*
* We're not going to build a standard frame here, so the arg accesses will
* look a little strange.
*
* On entry:
* esp+4 (arg0) MterpGlue* glue
* esp+8 (arg1) bool changeInterp
*/
dvmMterpStdBail:
movl 4(%esp),%ecx # grab glue
movl 8(%esp),%eax # changeInterp to return reg
movl offGlue_bailPtr(%ecx),%esp # Stack back to normal
addl $60,%esp # Strip dvmMterpStdRun's frame
pop %ebx
pop %esi
pop %edi
pop %ebp
ret # return to dvmMterpStdRun's caller
/*
* Strings
*/
.section .rodata
.LstrBadEntryPoint:
.asciz "Bad entry point %d\n"
/* File: x86/footer.S */
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Common subroutines and data.
*/
/*
* Common code when a backwards branch is taken
*
* On entry:
* ebx (a.k.a. rINST_FULL) -> PC adjustment in 16-bit words
*/
common_backwardBranch:
GET_GLUE(%ecx)
call common_periodicChecks # Note: expects rPC to be preserved
ADVANCE_PC_INDEXED(rINST_FULL)
FETCH_INST()
GOTO_NEXT
/*
* Common code for method invocation with range.
*
* On entry:
* eax = Method* methodToCall
* rINST trashed, must reload
*/
common_invokeMethodRange:
.LinvokeNewRange:
/*
* prepare to copy args to "outs" area of current frame
*/
movzbl 1(rPC),rINST_FULL # rINST_FULL<- AA
movzwl 4(rPC), %ecx # %ecx<- CCCC
SPILL(rPC)
SAVEAREA_FROM_FP(%edx,rFP) # %edx<- &StackSaveArea
test rINST_FULL, rINST_FULL
movl rINST_FULL, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- AA
jz .LinvokeArgsDone # no args; jump to args done
/*
* %eax=methodToCall, %ecx=CCCC, LOCAL0_OFFSET(%ebp)=count, %edx=&outs (&stackSaveArea)
* (very few methods have > 10 args; could unroll for common cases)
*/
movl %ebx, LOCAL1_OFFSET(%ebp) # LOCAL1_OFFSET(%ebp)<- save %ebx
lea (rFP, %ecx, 4), %ecx # %ecx<- &vCCCC
shll $2, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- offset
subl LOCAL0_OFFSET(%ebp), %edx # %edx<- update &outs
shrl $2, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- offset
1:
movl (%ecx), %ebx # %ebx<- vCCCC
lea 4(%ecx), %ecx # %ecx<- &vCCCC++
subl $1, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET<- LOCAL0_OFFSET--
movl %ebx, (%edx) # *outs<- vCCCC
lea 4(%edx), %edx # outs++
jne 1b # loop if count (LOCAL0_OFFSET(%ebp)) not zero
movl LOCAL1_OFFSET(%ebp), %ebx # %ebx<- restore %ebx
jmp .LinvokeArgsDone # continue
/*
* %eax is "Method* methodToCall", the method we're trying to call
* prepare to copy args to "outs" area of current frame
*/
common_invokeMethodNoRange:
.LinvokeNewNoRange:
movzbl 1(rPC),rINST_FULL # rINST_FULL<- BA
SPILL(rPC)
movl rINST_FULL, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- BA
shrl $4, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET(%ebp)<- B
je .LinvokeArgsDone # no args; jump to args done
movzwl 4(rPC), %ecx # %ecx<- GFED
SAVEAREA_FROM_FP(%edx,rFP) # %edx<- &StackSaveArea
/*
* %eax=methodToCall, %ecx=GFED, LOCAL0_OFFSET(%ebp)=count, %edx=outs
*/
.LinvokeNonRange:
cmp $2, LOCAL0_OFFSET(%ebp) # compare LOCAL0_OFFSET(%ebp) to 2
movl %ecx, LOCAL1_OFFSET(%ebp) # LOCAL1_OFFSET(%ebp)<- GFED
jl 1f # handle 1 arg
je 2f # handle 2 args
cmp $4, LOCAL0_OFFSET(%ebp) # compare LOCAL0_OFFSET(%ebp) to 4
jl 3f # handle 3 args
je 4f # handle 4 args
5:
andl $15, rINST_FULL # rINST<- A
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, rINST_FULL, 4), %ecx # %ecx<- vA
movl %ecx, (%edx) # *outs<- vA
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
4:
shr $12, %ecx # %ecx<- G
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, %ecx, 4), %ecx # %ecx<- vG
movl %ecx, (%edx) # *outs<- vG
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
3:
and $0x0f00, %ecx # %ecx<- 0F00
shr $8, %ecx # %ecx<- F
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, %ecx, 4), %ecx # %ecx<- vF
movl %ecx, (%edx) # *outs<- vF
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
2:
and $0x00f0, %ecx # %ecx<- 00E0
shr $4, %ecx # %ecx<- E
lea -4(%edx), %edx # %edx<- update &outs; &outs--
movl (rFP, %ecx, 4), %ecx # %ecx<- vE
movl %ecx, (%edx) # *outs<- vE
movl LOCAL1_OFFSET(%ebp), %ecx # %ecx<- GFED
1:
and $0x000f, %ecx # %ecx<- 000D
movl (rFP, %ecx, 4), %ecx # %ecx<- vD
movl %ecx, -4(%edx) # *--outs<- vD
0:
/*
* %eax is "Method* methodToCall", the method we're trying to call
* find space for the new stack frame, check for overflow
*/
.LinvokeArgsDone:
movzwl offMethod_registersSize(%eax), %edx # %edx<- methodToCall->regsSize
movzwl offMethod_outsSize(%eax), %ecx # %ecx<- methodToCall->outsSize
movl %eax, LOCAL0_OFFSET(%ebp) # LOCAL0_OFFSET<- methodToCall
shl $2, %edx # %edx<- update offset
SAVEAREA_FROM_FP(%eax,rFP) # %eax<- &StackSaveArea
subl %edx, %eax # %eax<- newFP; (old savearea - regsSize)
GET_GLUE(%edx) # %edx<- pMterpGlue
movl %eax, LOCAL1_OFFSET(%ebp) # LOCAL1_OFFSET(%ebp)<- &outs
subl $sizeofStackSaveArea, %eax # %eax<- newSaveArea (stack save area using newFP)
movl offGlue_interpStackEnd(%edx), %edx # %edx<- glue->interpStackEnd
movl %edx, LOCAL2_OFFSET(%ebp) # LOCAL2_OFFSET<- glue->interpStackEnd
shl $2, %ecx # %ecx<- update offset for outsSize
movl %eax, %edx # %edx<- newSaveArea
sub %ecx, %eax # %eax<- bottom; (newSaveArea - outsSize)
cmp LOCAL2_OFFSET(%ebp), %eax # compare interpStackEnd and bottom
movl LOCAL0_OFFSET(%ebp), %eax # %eax<- restore methodToCall
jl .LstackOverflow # handle frame overflow
/*
* set up newSaveArea
*/
#ifdef EASY_GDB
SAVEAREA_FROM_FP(%ecx,rFP) # %ecx<- &StackSaveArea
movl %ecx, offStackSaveArea_prevSave(%edx) # newSaveArea->prevSave<- &outs
#endif
movl rFP, offStackSaveArea_prevFrame(%edx) # newSaveArea->prevFrame<- rFP
movl rPC_SPILL(%ebp), %ecx
movl %ecx, offStackSaveArea_savedPc(%edx) # newSaveArea->savedPc<- rPC
testl $ACC_NATIVE, offMethod_accessFlags(%eax) # check for native call
movl %eax, offStackSaveArea_method(%edx) # newSaveArea->method<- method to call
jne .LinvokeNative # handle native call
/*
* Update "glue" values for the new method
* %eax=methodToCall, LOCAL1_OFFSET(%ebp)=newFp
*/
movl offMethod_clazz(%eax), %edx # %edx<- method->clazz
GET_GLUE(%ecx) # %ecx<- pMterpGlue
movl offClassObject_pDvmDex(%edx), %edx # %edx<- method->clazz->pDvmDex
movl %eax, offGlue_method(%ecx) # glue->method<- methodToCall
movl %edx, offGlue_methodClassDex(%ecx) # glue->methodClassDex<- method->clazz->pDvmDex
movl offMethod_insns(%eax), rPC # rPC<- methodToCall->insns
movl offGlue_self(%ecx), %eax # %eax<- glue->self
movl LOCAL1_OFFSET(%ebp), rFP # rFP<- newFP
movl rFP, offThread_curFrame(%eax) # glue->self->curFrame<- newFP
FETCH_INST()
GOTO_NEXT # jump to methodToCall->insns
/*
* Prep for the native call
* %eax=methodToCall, LOCAL1_OFFSET(%ebp)=newFP, %edx=newSaveArea
*/
.LinvokeNative:
GET_GLUE(%ecx) # %ecx<- pMterpGlue
movl %eax, OUT_ARG1(%esp) # push parameter methodToCall
movl offGlue_self(%ecx), %ecx # %ecx<- glue->self
movl offThread_jniLocal_topCookie(%ecx), %eax # %eax<- self->localRef->...
movl %eax, offStackSaveArea_localRefCookie(%edx) # newSaveArea->localRefCookie<- top
movl %edx, OUT_ARG4(%esp) # save newSaveArea
movl LOCAL1_OFFSET(%ebp), %edx # %edx<- newFP
movl %edx, offThread_curFrame(%ecx) # glue->self->curFrame<- newFP
movl %ecx, OUT_ARG3(%esp) # save glue->self
movl %ecx, OUT_ARG2(%esp) # push parameter glue->self
GET_GLUE(%ecx) # %ecx<- pMterpGlue
movl OUT_ARG1(%esp), %eax # %eax<- methodToCall
lea offGlue_retval(%ecx), %ecx # %ecx<- &retval
movl %ecx, OUT_ARG0(%esp) # push parameter pMterpGlue
push %edx # push parameter newFP
call *offMethod_nativeFunc(%eax) # call methodToCall->nativeFunc
lea 4(%esp), %esp
movl OUT_ARG4(%esp), %ecx # %ecx<- newSaveArea
movl OUT_ARG3(%esp), %eax # %eax<- glue->self
movl offStackSaveArea_localRefCookie(%ecx), %edx # %edx<- old top
cmp $0, offThread_exception(%eax) # check for exception
movl rFP, offThread_curFrame(%eax) # glue->self->curFrame<- rFP
movl %edx, offThread_jniLocal_topCookie(%eax) # new top <- old top
UNSPILL(rPC)
jne common_exceptionThrown # handle exception
FETCH_INST_WORD(3)
ADVANCE_PC(3)
GOTO_NEXT # jump to next instruction
.LstackOverflow: # eax=methodToCall
movl %eax, OUT_ARG1(%esp) # push parameter methodToCall
GET_GLUE(%eax) # %eax<- pMterpGlue
movl offGlue_self(%eax), %eax # %eax<- glue->self
movl %eax, OUT_ARG0(%esp) # push parameter self
call dvmHandleStackOverflow # call: (Thread* self, Method* meth)
UNSPILL(rPC) # return: void
jmp common_exceptionThrown # handle exception
/*
* Common invoke code (old-style).
* TUNING: Rewrite along lines of new armv5 code?
*
* On entry:
* eax = Method* methodToCall
* ecx = bool methodCallRange
* rINST trashed, must reload
*/
common_invokeOld:
movl %ecx,OUT_ARG1(%esp) # arg1<- methodCallRange
GET_GLUE(%ecx)
movzwl (rPC),rINST_FULL # recover rINST
movl %eax,OUT_ARG2(%esp) # arg2<- method
movzwl 4(rPC),%eax # eax<- GFED or CCCC
SAVE_PC_TO_GLUE(%ecx)
SAVE_FP_TO_GLUE(%ecx)
movzbl rINST_HI,rINST_FULL
movl rINST_FULL,OUT_ARG3(%esp)# arg3<- AA
movl %ecx,OUT_ARG0(%esp) # arg0<- GLUE
movl %eax,OUT_ARG4(%esp) # arg4<- GFED/CCCC
call dvmMterp_invokeMethod
jmp common_resumeAfterGlueCall
/*
* Do we need the thread to be suspended or have debugger/profiling activity?
*
* On entry:
* ebx -> PC adjustment in 16-bit words (must be preserved)
* ecx -> GLUE pointer
*
* Note: A call will normally kill %eax, rPC/%edx and %ecx. To
* streamline the normal case, this routine will preserve rPC and
* %ecx in addition to the normal caller save regs. The save/restore
* is a bit ugly, but will happen in the relatively uncommon path.
* TUNING: Might be worthwhile to inline this.
* TODO: Basic-block style Jit will need a hook here as well. Fold it into
* the suspendCount check so we can get both in 1 shot.
* TODO: to match the other intepreters, this should handle suspension
* and then check for debugger/profiling after dvmCheckSuspendPending
* returns.
*/
common_periodicChecks:
movl offGlue_pSelfSuspendCount(%ecx),%eax # eax <- &suspendCount
cmpl $0,(%eax)
jne 1f
#if defined(WITH_DEBUGGER) || defined(WITH_PROFILER)
#if defined(WITH_DEBUGGER)
movl offGlue_pDebuggerActive(%ecx),%eax # eax <- &DebuggerActive
#endif
#if defined(WITH_PROFILER)
movl offGlue_pActiveProfilers(%ecx),%ecx # ecx <- &ActiveProfilers
#endif
#if defined(WITH_DEBUGGER) && defined(WITH_PROFILER)
# TODO: check for NULL before load
movzbl (%eax),%eax # eax <- debuggerActive (boolean)
orl (%ecx),%eax # eax <- debuggerActive || activeProfilers
#elif defined(WITH_DEBUGGER)
# TODO: check for NULL before load
movzbl (%eax),%eax # eax <- debuggerActive (boolean)
#elif defined(WITH_PROFILER)
movl (%ecx),%eax # eax <= activeProfilers
#endif
GET_GLUE(%ecx) # restore rGLUE
testl %eax,%eax
jne 3f # one or both active - switch interp
#endif
ret
/* Check for suspend */
1:
/* At this point, the return pointer to the caller of
* common_periodicChecks is on the top of stack. We need to preserve
* rPC(edx) and GLUE(ecx). We'll spill rPC, and reload GLUE.
* The outgoing profile is:
* bool dvmCheckSuspendPending(Thread* self)
* Because we reached here via a call, go ahead and build a new frame.
*/
EXPORT_PC() # need for precise GC
movl offGlue_self(%ecx),%eax # eax<- glue->self
SPILL(rPC) # save edx
push %ebp
movl %esp,%ebp
subl $24,%esp
movl %eax,OUT_ARG0(%esp)
call dvmCheckSuspendPending
addl $24,%esp
pop %ebp
UNSPILL(rPC)
GET_GLUE(%ecx)
ret
/* Switch interpreters */
/* Note: %ebx contains the 16-bit word offset to be applied to rPC to
* "complete" the interpretation of backwards branches. In effect, we
* are completing the interpretation of the branch instruction here,
* and the new interpreter will resume interpretation at the branch
* target. However, a switch request recognized during the handling
* of a return from method instruction results in an immediate abort,
* and the new interpreter will resume by re-interpreting the return
* instruction.
*/
3:
leal (rPC,%ebx,2),rPC # adjust pc to show target
GET_GLUE(%ecx) # bail expect GLUE already loaded
movl $1,rINST_FULL # set changeInterp to true
jmp common_gotoBail
/*
* Common code for handling a return instruction
*/
common_returnFromMethod:
GET_GLUE(%ecx)
/* Set entry mode in case we bail */
movb $kInterpEntryReturn,offGlue_entryPoint(%ecx)
xorl rINST_FULL,rINST_FULL # zero offset in case we switch interps
call common_periodicChecks # Note: expects %ecx to be preserved
SAVEAREA_FROM_FP(%eax,rFP) # eax<- saveArea (old)
movl offStackSaveArea_prevFrame(%eax),rFP # rFP<- prevFrame
movl (offStackSaveArea_method-sizeofStackSaveArea)(rFP),rINST_FULL
cmpl $0,rINST_FULL # break?
je common_gotoBail # break frame, bail out completely
movl offStackSaveArea_savedPc(%eax),rPC # pc<- saveArea->savedPC
movl offGlue_self(%ecx),%eax # eax<- self
movl rINST_FULL,offGlue_method(%ecx) # glue->method = newSave->meethod
movl rFP,offThread_curFrame(%eax) # self->curFrame = fp
movl offMethod_clazz(rINST_FULL),%eax # eax<- method->clazz
FETCH_INST_WORD(3)
movl offClassObject_pDvmDex(%eax),%eax # eax<- method->clazz->pDvmDex
ADVANCE_PC(3)
movl %eax,offGlue_methodClassDex(%ecx)
/* not bailing - restore entry mode to default */
movb $kInterpEntryInstr,offGlue_entryPoint(%ecx)
GOTO_NEXT
/*
* Prepare to strip the current frame and "longjump" back to caller of
* dvmMterpStdRun.
*
* on entry:
* rINST_FULL holds changeInterp
* ecx holds glue pointer
*
* expected profile: dvmMterpStdBail(MterpGlue *glue, bool changeInterp)
*/
common_gotoBail:
SAVE_PC_TO_GLUE(%ecx) # export state to glue
SAVE_FP_TO_GLUE(%ecx)
movl %ecx,OUT_ARG0(%esp) # glue in arg0
movl rINST_FULL,OUT_ARG1(%esp) # changeInterp in arg1
call dvmMterpStdBail # bail out....
/*
* After returning from a "glued" function, pull out the updated values
* and start executing at the next instruction.
*/
common_resumeAfterGlueCall:
GET_GLUE(%ecx)
LOAD_PC_FROM_GLUE(%ecx)
LOAD_FP_FROM_GLUE(%ecx)
FETCH_INST()
GOTO_NEXT
/*
* Integer divide or mod by zero
*/
common_errDivideByZero:
EXPORT_PC()
movl $.LstrArithmeticException,%eax
movl %eax,OUT_ARG0(%esp)
movl $.LstrDivideByZero,%eax
movl %eax,OUT_ARG1(%esp)
SPILL(rPC)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/*
* Attempt to allocate an array with a negative size.
*/
common_errNegativeArraySize:
EXPORT_PC()
movl $.LstrNegativeArraySizeException,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
SPILL(rPC)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/*
* Attempt to allocate an array with a negative size.
*/
common_errNoSuchMethod:
EXPORT_PC()
movl $.LstrNoSuchMethodError,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
SPILL(rPC)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/*
* Hit a null object when we weren't expecting one. Export the PC, throw a
* NullPointerException and goto the exception processing code.
*/
common_errNullObject:
EXPORT_PC()
movl $.LstrNullPointerException,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
SPILL(rPC)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/*
* Array index exceeds max.
*/
common_errArrayIndex:
EXPORT_PC()
movl $.LstrArrayIndexException,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
SPILL(rPC)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/*
* Invalid array value.
*/
common_errArrayStore:
EXPORT_PC()
movl $.LstrArrayStoreException,%eax
movl %eax,OUT_ARG0(%esp)
xorl %eax,%eax
movl %eax,OUT_ARG1(%esp)
SPILL(rPC)
call dvmThrowException
UNSPILL(rPC)
jmp common_exceptionThrown
/*
* Somebody has thrown an exception. Handle it.
*
* If the exception processing code returns to us (instead of falling
* out of the interpreter), continue with whatever the next instruction
* now happens to be.
*
* This does not return.
*/
common_exceptionThrown:
GET_GLUE(%ecx)
SAVE_PC_TO_GLUE(%ecx)
SAVE_FP_TO_GLUE(%ecx)
movl %ecx,OUT_ARG0(%esp)
call dvmMterp_exceptionThrown
jmp common_resumeAfterGlueCall
common_abort:
movl $0xdeadf00d,%eax
call *%eax
/*
* Strings
*/
.section .rodata
.LstrNullPointerException:
.asciz "Ljava/lang/NullPointerException;"
.LstrArithmeticException:
.asciz "Ljava/lang/ArithmeticException;"
.LstrDivideByZero:
.asciz "divide by zero"
.LstrArrayIndexException:
.asciz "Ljava/lang/ArrayIndexOutOfBoundsException;"
.LstrArrayStoreException:
.asciz "Ljava/lang/ArrayStoreException;"
.LstrNegativeArraySizeException:
.asciz "Ljava/lang/NegativeArraySizeException;"
.LstrInstantiationError:
.asciz "Ljava/lang/InstantiationError;"
.LstrClassCastException:
.asciz "Ljava/lang/ClassCastException;"
.LstrNoSuchMethodError:
.asciz "Ljava/lang/NoSuchMethodError;"
.LstrInternalError:
.asciz "Ljava/lang/InternalError;"
.LstrFilledNewArrayNotImpl:
.asciz "filled-new-array only implemented for 'int'"