| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Dalvik instruction utility functions. |
| */ |
| #include "InstrUtils.h" |
| |
| #include <stdlib.h> |
| |
| |
| /* |
| * Generate a table that holds the width of all instructions. |
| * |
| * Standard instructions have positive values, optimizer instructions |
| * have negative values, unimplemented instructions have a width of zero. |
| * |
| * I'm doing it with a giant switch statement because it's easier to |
| * maintain and update than a static table with 256 unadorned integers, |
| * and if we're missing a case gcc emits a "warning: enumeration value not |
| * handled" message. |
| * |
| * (To save space in the binary we could generate a static table with a |
| * command-line utility.) |
| * |
| * TODO: it doesn't look like we're using the negative values anymore. |
| * Consider switching to only positive values. |
| */ |
| InstructionWidth* dexCreateInstrWidthTable(void) |
| { |
| #ifdef __ARM_ARCH_7A__ |
| /* hack to work around mysterious problem on emulator */ |
| LOGD("creating instr width table\n"); |
| #endif |
| InstructionWidth* instrWidth; |
| int i; |
| |
| instrWidth = malloc(sizeof(InstructionWidth) * kNumDalvikInstructions); |
| if (instrWidth == NULL) |
| return NULL; |
| |
| for (i = 0; i < kNumDalvikInstructions; i++) { |
| OpCode opc = (OpCode) i; |
| int width = 0; |
| |
| switch (opc) { |
| case OP_NOP: /* note data for e.g. switch-* encoded "inside" a NOP */ |
| case OP_MOVE: |
| case OP_MOVE_WIDE: |
| case OP_MOVE_OBJECT: |
| case OP_MOVE_RESULT: |
| case OP_MOVE_RESULT_WIDE: |
| case OP_MOVE_RESULT_OBJECT: |
| case OP_MOVE_EXCEPTION: |
| case OP_RETURN_VOID: |
| case OP_RETURN: |
| case OP_RETURN_WIDE: |
| case OP_RETURN_OBJECT: |
| case OP_CONST_4: |
| case OP_MONITOR_ENTER: |
| case OP_MONITOR_EXIT: |
| case OP_ARRAY_LENGTH: |
| case OP_THROW: |
| case OP_GOTO: |
| case OP_NEG_INT: |
| case OP_NOT_INT: |
| case OP_NEG_LONG: |
| case OP_NOT_LONG: |
| case OP_NEG_FLOAT: |
| case OP_NEG_DOUBLE: |
| case OP_INT_TO_LONG: |
| case OP_INT_TO_FLOAT: |
| case OP_INT_TO_DOUBLE: |
| case OP_LONG_TO_INT: |
| case OP_LONG_TO_FLOAT: |
| case OP_LONG_TO_DOUBLE: |
| case OP_FLOAT_TO_INT: |
| case OP_FLOAT_TO_LONG: |
| case OP_FLOAT_TO_DOUBLE: |
| case OP_DOUBLE_TO_INT: |
| case OP_DOUBLE_TO_LONG: |
| case OP_DOUBLE_TO_FLOAT: |
| case OP_INT_TO_BYTE: |
| case OP_INT_TO_CHAR: |
| case OP_INT_TO_SHORT: |
| case OP_ADD_INT_2ADDR: |
| case OP_SUB_INT_2ADDR: |
| case OP_MUL_INT_2ADDR: |
| case OP_DIV_INT_2ADDR: |
| case OP_REM_INT_2ADDR: |
| case OP_AND_INT_2ADDR: |
| case OP_OR_INT_2ADDR: |
| case OP_XOR_INT_2ADDR: |
| case OP_SHL_INT_2ADDR: |
| case OP_SHR_INT_2ADDR: |
| case OP_USHR_INT_2ADDR: |
| case OP_ADD_LONG_2ADDR: |
| case OP_SUB_LONG_2ADDR: |
| case OP_MUL_LONG_2ADDR: |
| case OP_DIV_LONG_2ADDR: |
| case OP_REM_LONG_2ADDR: |
| case OP_AND_LONG_2ADDR: |
| case OP_OR_LONG_2ADDR: |
| case OP_XOR_LONG_2ADDR: |
| case OP_SHL_LONG_2ADDR: |
| case OP_SHR_LONG_2ADDR: |
| case OP_USHR_LONG_2ADDR: |
| case OP_ADD_FLOAT_2ADDR: |
| case OP_SUB_FLOAT_2ADDR: |
| case OP_MUL_FLOAT_2ADDR: |
| case OP_DIV_FLOAT_2ADDR: |
| case OP_REM_FLOAT_2ADDR: |
| case OP_ADD_DOUBLE_2ADDR: |
| case OP_SUB_DOUBLE_2ADDR: |
| case OP_MUL_DOUBLE_2ADDR: |
| case OP_DIV_DOUBLE_2ADDR: |
| case OP_REM_DOUBLE_2ADDR: |
| width = 1; |
| break; |
| |
| case OP_MOVE_FROM16: |
| case OP_MOVE_WIDE_FROM16: |
| case OP_MOVE_OBJECT_FROM16: |
| case OP_CONST_16: |
| case OP_CONST_HIGH16: |
| case OP_CONST_WIDE_16: |
| case OP_CONST_WIDE_HIGH16: |
| case OP_CONST_STRING: |
| case OP_CONST_CLASS: |
| case OP_CHECK_CAST: |
| case OP_INSTANCE_OF: |
| case OP_NEW_INSTANCE: |
| case OP_NEW_ARRAY: |
| case OP_CMPL_FLOAT: |
| case OP_CMPG_FLOAT: |
| case OP_CMPL_DOUBLE: |
| case OP_CMPG_DOUBLE: |
| case OP_CMP_LONG: |
| case OP_GOTO_16: |
| case OP_IF_EQ: |
| case OP_IF_NE: |
| case OP_IF_LT: |
| case OP_IF_GE: |
| case OP_IF_GT: |
| case OP_IF_LE: |
| case OP_IF_EQZ: |
| case OP_IF_NEZ: |
| case OP_IF_LTZ: |
| case OP_IF_GEZ: |
| case OP_IF_GTZ: |
| case OP_IF_LEZ: |
| case OP_AGET: |
| case OP_AGET_WIDE: |
| case OP_AGET_OBJECT: |
| case OP_AGET_BOOLEAN: |
| case OP_AGET_BYTE: |
| case OP_AGET_CHAR: |
| case OP_AGET_SHORT: |
| case OP_APUT: |
| case OP_APUT_WIDE: |
| case OP_APUT_OBJECT: |
| case OP_APUT_BOOLEAN: |
| case OP_APUT_BYTE: |
| case OP_APUT_CHAR: |
| case OP_APUT_SHORT: |
| case OP_IGET: |
| case OP_IGET_WIDE: |
| case OP_IGET_OBJECT: |
| case OP_IGET_BOOLEAN: |
| case OP_IGET_BYTE: |
| case OP_IGET_CHAR: |
| case OP_IGET_SHORT: |
| case OP_IPUT: |
| case OP_IPUT_WIDE: |
| case OP_IPUT_OBJECT: |
| case OP_IPUT_BOOLEAN: |
| case OP_IPUT_BYTE: |
| case OP_IPUT_CHAR: |
| case OP_IPUT_SHORT: |
| case OP_SGET: |
| case OP_SGET_WIDE: |
| case OP_SGET_OBJECT: |
| case OP_SGET_BOOLEAN: |
| case OP_SGET_BYTE: |
| case OP_SGET_CHAR: |
| case OP_SGET_SHORT: |
| case OP_SPUT: |
| case OP_SPUT_WIDE: |
| case OP_SPUT_OBJECT: |
| case OP_SPUT_BOOLEAN: |
| case OP_SPUT_BYTE: |
| case OP_SPUT_CHAR: |
| case OP_SPUT_SHORT: |
| case OP_ADD_INT: |
| case OP_SUB_INT: |
| case OP_MUL_INT: |
| case OP_DIV_INT: |
| case OP_REM_INT: |
| case OP_AND_INT: |
| case OP_OR_INT: |
| case OP_XOR_INT: |
| case OP_SHL_INT: |
| case OP_SHR_INT: |
| case OP_USHR_INT: |
| case OP_ADD_LONG: |
| case OP_SUB_LONG: |
| case OP_MUL_LONG: |
| case OP_DIV_LONG: |
| case OP_REM_LONG: |
| case OP_AND_LONG: |
| case OP_OR_LONG: |
| case OP_XOR_LONG: |
| case OP_SHL_LONG: |
| case OP_SHR_LONG: |
| case OP_USHR_LONG: |
| case OP_ADD_FLOAT: |
| case OP_SUB_FLOAT: |
| case OP_MUL_FLOAT: |
| case OP_DIV_FLOAT: |
| case OP_REM_FLOAT: |
| case OP_ADD_DOUBLE: |
| case OP_SUB_DOUBLE: |
| case OP_MUL_DOUBLE: |
| case OP_DIV_DOUBLE: |
| case OP_REM_DOUBLE: |
| case OP_ADD_INT_LIT16: |
| case OP_RSUB_INT: |
| case OP_MUL_INT_LIT16: |
| case OP_DIV_INT_LIT16: |
| case OP_REM_INT_LIT16: |
| case OP_AND_INT_LIT16: |
| case OP_OR_INT_LIT16: |
| case OP_XOR_INT_LIT16: |
| case OP_ADD_INT_LIT8: |
| case OP_RSUB_INT_LIT8: |
| case OP_MUL_INT_LIT8: |
| case OP_DIV_INT_LIT8: |
| case OP_REM_INT_LIT8: |
| case OP_AND_INT_LIT8: |
| case OP_OR_INT_LIT8: |
| case OP_XOR_INT_LIT8: |
| case OP_SHL_INT_LIT8: |
| case OP_SHR_INT_LIT8: |
| case OP_USHR_INT_LIT8: |
| width = 2; |
| break; |
| |
| case OP_MOVE_16: |
| case OP_MOVE_WIDE_16: |
| case OP_MOVE_OBJECT_16: |
| case OP_CONST: |
| case OP_CONST_WIDE_32: |
| case OP_CONST_STRING_JUMBO: |
| case OP_GOTO_32: |
| case OP_FILLED_NEW_ARRAY: |
| case OP_FILLED_NEW_ARRAY_RANGE: |
| case OP_FILL_ARRAY_DATA: |
| case OP_PACKED_SWITCH: |
| case OP_SPARSE_SWITCH: |
| case OP_INVOKE_VIRTUAL: |
| case OP_INVOKE_SUPER: |
| case OP_INVOKE_DIRECT: |
| case OP_INVOKE_STATIC: |
| case OP_INVOKE_INTERFACE: |
| case OP_INVOKE_VIRTUAL_RANGE: |
| case OP_INVOKE_SUPER_RANGE: |
| case OP_INVOKE_DIRECT_RANGE: |
| case OP_INVOKE_STATIC_RANGE: |
| case OP_INVOKE_INTERFACE_RANGE: |
| width = 3; |
| break; |
| |
| case OP_CONST_WIDE: |
| width = 5; |
| break; |
| |
| /* |
| * Optimized instructions. We return negative size values for these |
| * to distinguish them. |
| */ |
| case OP_RETURN_VOID_BARRIER: |
| width = -1; |
| break; |
| case OP_IGET_QUICK: |
| case OP_IGET_WIDE_QUICK: |
| case OP_IGET_OBJECT_QUICK: |
| case OP_IPUT_QUICK: |
| case OP_IPUT_WIDE_QUICK: |
| case OP_IPUT_OBJECT_QUICK: |
| case OP_IGET_VOLATILE: |
| case OP_IPUT_VOLATILE: |
| case OP_SGET_VOLATILE: |
| case OP_SPUT_VOLATILE: |
| case OP_IGET_OBJECT_VOLATILE: |
| case OP_IPUT_OBJECT_VOLATILE: |
| case OP_SGET_OBJECT_VOLATILE: |
| case OP_SPUT_OBJECT_VOLATILE: |
| case OP_IGET_WIDE_VOLATILE: |
| case OP_IPUT_WIDE_VOLATILE: |
| case OP_SGET_WIDE_VOLATILE: |
| case OP_SPUT_WIDE_VOLATILE: |
| case OP_THROW_VERIFICATION_ERROR: |
| width = -2; |
| break; |
| case OP_INVOKE_VIRTUAL_QUICK: |
| case OP_INVOKE_VIRTUAL_QUICK_RANGE: |
| case OP_INVOKE_SUPER_QUICK: |
| case OP_INVOKE_SUPER_QUICK_RANGE: |
| case OP_EXECUTE_INLINE: |
| case OP_EXECUTE_INLINE_RANGE: |
| case OP_INVOKE_DIRECT_EMPTY: |
| width = -3; |
| break; |
| |
| /* these should never appear when scanning bytecode */ |
| case OP_UNUSED_3E: |
| case OP_UNUSED_3F: |
| case OP_UNUSED_40: |
| case OP_UNUSED_41: |
| case OP_UNUSED_42: |
| case OP_UNUSED_43: |
| case OP_UNUSED_73: |
| case OP_UNUSED_79: |
| case OP_UNUSED_7A: |
| case OP_BREAKPOINT: |
| case OP_UNUSED_FF: |
| assert(width == 0); |
| break; |
| |
| /* |
| * DO NOT add a "default" clause here. Without it the compiler will |
| * complain if an instruction is missing (which is desirable). |
| */ |
| } |
| |
| instrWidth[opc] = width; |
| } |
| |
| return instrWidth; |
| } |
| |
| /* |
| * Generate a table that holds instruction flags. |
| */ |
| InstructionFlags* dexCreateInstrFlagsTable(void) |
| { |
| InstructionFlags* instrFlags; |
| int i; |
| |
| instrFlags = malloc(sizeof(InstructionFlags) * kNumDalvikInstructions); |
| if (instrFlags == NULL) |
| return NULL; |
| |
| for (i = 0; i < kNumDalvikInstructions; i++) { |
| OpCode opc = (OpCode) i; |
| InstructionFlags flags = 0; |
| |
| switch (opc) { |
| /* these don't affect the PC and can't cause an exception */ |
| case OP_NOP: |
| case OP_MOVE: |
| case OP_MOVE_FROM16: |
| case OP_MOVE_16: |
| case OP_MOVE_WIDE: |
| case OP_MOVE_WIDE_FROM16: |
| case OP_MOVE_WIDE_16: |
| case OP_MOVE_OBJECT: |
| case OP_MOVE_OBJECT_FROM16: |
| case OP_MOVE_OBJECT_16: |
| case OP_MOVE_RESULT: |
| case OP_MOVE_RESULT_WIDE: |
| case OP_MOVE_RESULT_OBJECT: |
| case OP_MOVE_EXCEPTION: |
| case OP_CONST_4: |
| case OP_CONST_16: |
| case OP_CONST: |
| case OP_CONST_HIGH16: |
| case OP_CONST_WIDE_16: |
| case OP_CONST_WIDE_32: |
| case OP_CONST_WIDE: |
| case OP_CONST_WIDE_HIGH16: |
| case OP_FILL_ARRAY_DATA: |
| case OP_CMPL_FLOAT: |
| case OP_CMPG_FLOAT: |
| case OP_CMPL_DOUBLE: |
| case OP_CMPG_DOUBLE: |
| case OP_CMP_LONG: |
| case OP_NEG_INT: |
| case OP_NOT_INT: |
| case OP_NEG_LONG: |
| case OP_NOT_LONG: |
| case OP_NEG_FLOAT: |
| case OP_NEG_DOUBLE: |
| case OP_INT_TO_LONG: |
| case OP_INT_TO_FLOAT: |
| case OP_INT_TO_DOUBLE: |
| case OP_LONG_TO_INT: |
| case OP_LONG_TO_FLOAT: |
| case OP_LONG_TO_DOUBLE: |
| case OP_FLOAT_TO_INT: |
| case OP_FLOAT_TO_LONG: |
| case OP_FLOAT_TO_DOUBLE: |
| case OP_DOUBLE_TO_INT: |
| case OP_DOUBLE_TO_LONG: |
| case OP_DOUBLE_TO_FLOAT: |
| case OP_INT_TO_BYTE: |
| case OP_INT_TO_CHAR: |
| case OP_INT_TO_SHORT: |
| case OP_ADD_INT: |
| case OP_SUB_INT: |
| case OP_MUL_INT: |
| case OP_AND_INT: |
| case OP_OR_INT: |
| case OP_XOR_INT: |
| case OP_SHL_INT: |
| case OP_SHR_INT: |
| case OP_USHR_INT: |
| case OP_ADD_LONG: |
| case OP_SUB_LONG: |
| case OP_MUL_LONG: |
| case OP_AND_LONG: |
| case OP_OR_LONG: |
| case OP_XOR_LONG: |
| case OP_SHL_LONG: |
| case OP_SHR_LONG: |
| case OP_USHR_LONG: |
| case OP_ADD_FLOAT: |
| case OP_SUB_FLOAT: |
| case OP_MUL_FLOAT: |
| case OP_DIV_FLOAT: |
| case OP_REM_FLOAT: |
| case OP_ADD_DOUBLE: |
| case OP_SUB_DOUBLE: |
| case OP_MUL_DOUBLE: |
| case OP_DIV_DOUBLE: // div by zero just returns NaN |
| case OP_REM_DOUBLE: |
| case OP_ADD_INT_2ADDR: |
| case OP_SUB_INT_2ADDR: |
| case OP_MUL_INT_2ADDR: |
| case OP_AND_INT_2ADDR: |
| case OP_OR_INT_2ADDR: |
| case OP_XOR_INT_2ADDR: |
| case OP_SHL_INT_2ADDR: |
| case OP_SHR_INT_2ADDR: |
| case OP_USHR_INT_2ADDR: |
| case OP_ADD_LONG_2ADDR: |
| case OP_SUB_LONG_2ADDR: |
| case OP_MUL_LONG_2ADDR: |
| case OP_AND_LONG_2ADDR: |
| case OP_OR_LONG_2ADDR: |
| case OP_XOR_LONG_2ADDR: |
| case OP_SHL_LONG_2ADDR: |
| case OP_SHR_LONG_2ADDR: |
| case OP_USHR_LONG_2ADDR: |
| case OP_ADD_FLOAT_2ADDR: |
| case OP_SUB_FLOAT_2ADDR: |
| case OP_MUL_FLOAT_2ADDR: |
| case OP_DIV_FLOAT_2ADDR: |
| case OP_REM_FLOAT_2ADDR: |
| case OP_ADD_DOUBLE_2ADDR: |
| case OP_SUB_DOUBLE_2ADDR: |
| case OP_MUL_DOUBLE_2ADDR: |
| case OP_DIV_DOUBLE_2ADDR: |
| case OP_REM_DOUBLE_2ADDR: |
| case OP_ADD_INT_LIT16: |
| case OP_RSUB_INT: |
| case OP_MUL_INT_LIT16: |
| case OP_AND_INT_LIT16: |
| case OP_OR_INT_LIT16: |
| case OP_XOR_INT_LIT16: |
| case OP_ADD_INT_LIT8: |
| case OP_RSUB_INT_LIT8: |
| case OP_MUL_INT_LIT8: |
| case OP_AND_INT_LIT8: |
| case OP_OR_INT_LIT8: |
| case OP_XOR_INT_LIT8: |
| case OP_SHL_INT_LIT8: |
| case OP_SHR_INT_LIT8: |
| case OP_USHR_INT_LIT8: |
| flags = kInstrCanContinue; |
| break; |
| |
| /* these don't affect the PC, but can cause exceptions */ |
| case OP_CONST_STRING: |
| case OP_CONST_STRING_JUMBO: |
| case OP_CONST_CLASS: |
| case OP_MONITOR_ENTER: |
| case OP_MONITOR_EXIT: |
| case OP_CHECK_CAST: |
| case OP_INSTANCE_OF: |
| case OP_ARRAY_LENGTH: |
| case OP_NEW_INSTANCE: |
| case OP_NEW_ARRAY: |
| case OP_FILLED_NEW_ARRAY: |
| case OP_FILLED_NEW_ARRAY_RANGE: |
| case OP_AGET: |
| case OP_AGET_BOOLEAN: |
| case OP_AGET_BYTE: |
| case OP_AGET_CHAR: |
| case OP_AGET_SHORT: |
| case OP_AGET_WIDE: |
| case OP_AGET_OBJECT: |
| case OP_APUT: |
| case OP_APUT_BOOLEAN: |
| case OP_APUT_BYTE: |
| case OP_APUT_CHAR: |
| case OP_APUT_SHORT: |
| case OP_APUT_WIDE: |
| case OP_APUT_OBJECT: |
| case OP_IGET: |
| case OP_IGET_BOOLEAN: |
| case OP_IGET_BYTE: |
| case OP_IGET_CHAR: |
| case OP_IGET_SHORT: |
| case OP_IGET_WIDE: |
| case OP_IGET_OBJECT: |
| case OP_IPUT: |
| case OP_IPUT_BOOLEAN: |
| case OP_IPUT_BYTE: |
| case OP_IPUT_CHAR: |
| case OP_IPUT_SHORT: |
| case OP_IPUT_WIDE: |
| case OP_IPUT_OBJECT: |
| case OP_SGET: |
| case OP_SGET_BOOLEAN: |
| case OP_SGET_BYTE: |
| case OP_SGET_CHAR: |
| case OP_SGET_SHORT: |
| case OP_SGET_WIDE: |
| case OP_SGET_OBJECT: |
| case OP_SPUT: |
| case OP_SPUT_BOOLEAN: |
| case OP_SPUT_BYTE: |
| case OP_SPUT_CHAR: |
| case OP_SPUT_SHORT: |
| case OP_SPUT_WIDE: |
| case OP_SPUT_OBJECT: |
| case OP_DIV_INT: |
| case OP_REM_INT: |
| case OP_DIV_LONG: |
| case OP_REM_LONG: |
| case OP_DIV_INT_2ADDR: |
| case OP_REM_INT_2ADDR: |
| case OP_DIV_LONG_2ADDR: |
| case OP_REM_LONG_2ADDR: |
| case OP_DIV_INT_LIT16: |
| case OP_REM_INT_LIT16: |
| case OP_DIV_INT_LIT8: |
| case OP_REM_INT_LIT8: |
| flags = kInstrCanContinue | kInstrCanThrow; |
| break; |
| |
| case OP_INVOKE_VIRTUAL: |
| case OP_INVOKE_VIRTUAL_RANGE: |
| case OP_INVOKE_SUPER: |
| case OP_INVOKE_SUPER_RANGE: |
| case OP_INVOKE_DIRECT: |
| case OP_INVOKE_DIRECT_RANGE: |
| case OP_INVOKE_STATIC: |
| case OP_INVOKE_STATIC_RANGE: |
| case OP_INVOKE_INTERFACE: |
| case OP_INVOKE_INTERFACE_RANGE: |
| flags = kInstrCanContinue | kInstrCanThrow | kInstrInvoke; |
| break; |
| |
| case OP_RETURN_VOID: |
| case OP_RETURN: |
| case OP_RETURN_WIDE: |
| case OP_RETURN_OBJECT: |
| flags = kInstrCanReturn; |
| break; |
| |
| case OP_THROW: |
| flags = kInstrCanThrow; |
| break; |
| |
| /* unconditional branches */ |
| case OP_GOTO: |
| case OP_GOTO_16: |
| case OP_GOTO_32: |
| flags = kInstrCanBranch | kInstrUnconditional; |
| break; |
| |
| /* conditional branches */ |
| case OP_IF_EQ: |
| case OP_IF_NE: |
| case OP_IF_LT: |
| case OP_IF_GE: |
| case OP_IF_GT: |
| case OP_IF_LE: |
| case OP_IF_EQZ: |
| case OP_IF_NEZ: |
| case OP_IF_LTZ: |
| case OP_IF_GEZ: |
| case OP_IF_GTZ: |
| case OP_IF_LEZ: |
| flags = kInstrCanBranch | kInstrCanContinue; |
| break; |
| |
| /* switch statements; if value not in switch, it continues */ |
| case OP_PACKED_SWITCH: |
| case OP_SPARSE_SWITCH: |
| flags = kInstrCanSwitch | kInstrCanContinue; |
| break; |
| |
| /* verifier/optimizer-generated instructions */ |
| case OP_THROW_VERIFICATION_ERROR: |
| flags = kInstrCanThrow; |
| break; |
| case OP_EXECUTE_INLINE: |
| case OP_EXECUTE_INLINE_RANGE: |
| flags = kInstrCanContinue | kInstrCanThrow; |
| break; |
| case OP_IGET_QUICK: |
| case OP_IGET_WIDE_QUICK: |
| case OP_IGET_OBJECT_QUICK: |
| case OP_IPUT_QUICK: |
| case OP_IPUT_WIDE_QUICK: |
| case OP_IPUT_OBJECT_QUICK: |
| case OP_IGET_VOLATILE: |
| case OP_IPUT_VOLATILE: |
| case OP_SGET_VOLATILE: |
| case OP_SPUT_VOLATILE: |
| case OP_IGET_OBJECT_VOLATILE: |
| case OP_IPUT_OBJECT_VOLATILE: |
| case OP_SGET_OBJECT_VOLATILE: |
| case OP_SPUT_OBJECT_VOLATILE: |
| case OP_IGET_WIDE_VOLATILE: |
| case OP_IPUT_WIDE_VOLATILE: |
| case OP_SGET_WIDE_VOLATILE: |
| case OP_SPUT_WIDE_VOLATILE: |
| flags = kInstrCanContinue | kInstrCanThrow; |
| break; |
| case OP_INVOKE_VIRTUAL_QUICK: |
| case OP_INVOKE_VIRTUAL_QUICK_RANGE: |
| case OP_INVOKE_SUPER_QUICK: |
| case OP_INVOKE_SUPER_QUICK_RANGE: |
| case OP_INVOKE_DIRECT_EMPTY: |
| flags = kInstrCanContinue | kInstrCanThrow | kInstrInvoke; |
| break; |
| case OP_RETURN_VOID_BARRIER: |
| flags = kInstrCanReturn; |
| break; |
| |
| /* these should never appear when scanning code */ |
| case OP_UNUSED_3E: |
| case OP_UNUSED_3F: |
| case OP_UNUSED_40: |
| case OP_UNUSED_41: |
| case OP_UNUSED_42: |
| case OP_UNUSED_43: |
| case OP_UNUSED_73: |
| case OP_UNUSED_79: |
| case OP_UNUSED_7A: |
| case OP_BREAKPOINT: |
| case OP_UNUSED_FF: |
| break; |
| |
| /* |
| * DO NOT add a "default" clause here. Without it the compiler will |
| * complain if an instruction is missing (which is desirable). |
| */ |
| } |
| |
| instrFlags[opc] = flags; |
| } |
| |
| return instrFlags; |
| } |
| |
| /* |
| * Allocate and populate a 256-element array with instruction formats. |
| * Used in conjunction with dexDecodeInstruction. |
| */ |
| InstructionFormat* dexCreateInstrFormatTable(void) |
| { |
| InstructionFormat* instFmt; |
| int i; |
| |
| instFmt = malloc(sizeof(InstructionFormat) * kNumDalvikInstructions); |
| if (instFmt == NULL) |
| return NULL; |
| |
| for (i = 0; i < kNumDalvikInstructions; i++) { |
| OpCode opc = (OpCode) i; |
| InstructionFormat fmt = kFmtUnknown; |
| |
| switch (opc) { |
| case OP_GOTO: |
| fmt = kFmt10t; |
| break; |
| case OP_NOP: |
| case OP_RETURN_VOID: |
| fmt = kFmt10x; |
| break; |
| case OP_CONST_4: |
| fmt = kFmt11n; |
| break; |
| case OP_CONST_HIGH16: |
| case OP_CONST_WIDE_HIGH16: |
| fmt = kFmt21h; |
| break; |
| case OP_MOVE_RESULT: |
| case OP_MOVE_RESULT_WIDE: |
| case OP_MOVE_RESULT_OBJECT: |
| case OP_MOVE_EXCEPTION: |
| case OP_RETURN: |
| case OP_RETURN_WIDE: |
| case OP_RETURN_OBJECT: |
| case OP_MONITOR_ENTER: |
| case OP_MONITOR_EXIT: |
| case OP_THROW: |
| fmt = kFmt11x; |
| break; |
| case OP_MOVE: |
| case OP_MOVE_WIDE: |
| case OP_MOVE_OBJECT: |
| case OP_ARRAY_LENGTH: |
| case OP_NEG_INT: |
| case OP_NOT_INT: |
| case OP_NEG_LONG: |
| case OP_NOT_LONG: |
| case OP_NEG_FLOAT: |
| case OP_NEG_DOUBLE: |
| case OP_INT_TO_LONG: |
| case OP_INT_TO_FLOAT: |
| case OP_INT_TO_DOUBLE: |
| case OP_LONG_TO_INT: |
| case OP_LONG_TO_FLOAT: |
| case OP_LONG_TO_DOUBLE: |
| case OP_FLOAT_TO_INT: |
| case OP_FLOAT_TO_LONG: |
| case OP_FLOAT_TO_DOUBLE: |
| case OP_DOUBLE_TO_INT: |
| case OP_DOUBLE_TO_LONG: |
| case OP_DOUBLE_TO_FLOAT: |
| case OP_INT_TO_BYTE: |
| case OP_INT_TO_CHAR: |
| case OP_INT_TO_SHORT: |
| case OP_ADD_INT_2ADDR: |
| case OP_SUB_INT_2ADDR: |
| case OP_MUL_INT_2ADDR: |
| case OP_DIV_INT_2ADDR: |
| case OP_REM_INT_2ADDR: |
| case OP_AND_INT_2ADDR: |
| case OP_OR_INT_2ADDR: |
| case OP_XOR_INT_2ADDR: |
| case OP_SHL_INT_2ADDR: |
| case OP_SHR_INT_2ADDR: |
| case OP_USHR_INT_2ADDR: |
| case OP_ADD_LONG_2ADDR: |
| case OP_SUB_LONG_2ADDR: |
| case OP_MUL_LONG_2ADDR: |
| case OP_DIV_LONG_2ADDR: |
| case OP_REM_LONG_2ADDR: |
| case OP_AND_LONG_2ADDR: |
| case OP_OR_LONG_2ADDR: |
| case OP_XOR_LONG_2ADDR: |
| case OP_SHL_LONG_2ADDR: |
| case OP_SHR_LONG_2ADDR: |
| case OP_USHR_LONG_2ADDR: |
| case OP_ADD_FLOAT_2ADDR: |
| case OP_SUB_FLOAT_2ADDR: |
| case OP_MUL_FLOAT_2ADDR: |
| case OP_DIV_FLOAT_2ADDR: |
| case OP_REM_FLOAT_2ADDR: |
| case OP_ADD_DOUBLE_2ADDR: |
| case OP_SUB_DOUBLE_2ADDR: |
| case OP_MUL_DOUBLE_2ADDR: |
| case OP_DIV_DOUBLE_2ADDR: |
| case OP_REM_DOUBLE_2ADDR: |
| fmt = kFmt12x; |
| break; |
| case OP_GOTO_16: |
| fmt = kFmt20t; |
| break; |
| case OP_GOTO_32: |
| fmt = kFmt30t; |
| break; |
| case OP_CONST_STRING: |
| case OP_CONST_CLASS: |
| case OP_CHECK_CAST: |
| case OP_NEW_INSTANCE: |
| case OP_SGET: |
| case OP_SGET_WIDE: |
| case OP_SGET_OBJECT: |
| case OP_SGET_BOOLEAN: |
| case OP_SGET_BYTE: |
| case OP_SGET_CHAR: |
| case OP_SGET_SHORT: |
| case OP_SPUT: |
| case OP_SPUT_WIDE: |
| case OP_SPUT_OBJECT: |
| case OP_SPUT_BOOLEAN: |
| case OP_SPUT_BYTE: |
| case OP_SPUT_CHAR: |
| case OP_SPUT_SHORT: |
| fmt = kFmt21c; |
| break; |
| case OP_CONST_16: |
| case OP_CONST_WIDE_16: |
| fmt = kFmt21s; |
| break; |
| case OP_IF_EQZ: |
| case OP_IF_NEZ: |
| case OP_IF_LTZ: |
| case OP_IF_GEZ: |
| case OP_IF_GTZ: |
| case OP_IF_LEZ: |
| fmt = kFmt21t; |
| break; |
| case OP_FILL_ARRAY_DATA: |
| case OP_PACKED_SWITCH: |
| case OP_SPARSE_SWITCH: |
| fmt = kFmt31t; |
| break; |
| case OP_ADD_INT_LIT8: |
| case OP_RSUB_INT_LIT8: |
| case OP_MUL_INT_LIT8: |
| case OP_DIV_INT_LIT8: |
| case OP_REM_INT_LIT8: |
| case OP_AND_INT_LIT8: |
| case OP_OR_INT_LIT8: |
| case OP_XOR_INT_LIT8: |
| case OP_SHL_INT_LIT8: |
| case OP_SHR_INT_LIT8: |
| case OP_USHR_INT_LIT8: |
| fmt = kFmt22b; |
| break; |
| case OP_INSTANCE_OF: |
| case OP_NEW_ARRAY: |
| case OP_IGET: |
| case OP_IGET_WIDE: |
| case OP_IGET_OBJECT: |
| case OP_IGET_BOOLEAN: |
| case OP_IGET_BYTE: |
| case OP_IGET_CHAR: |
| case OP_IGET_SHORT: |
| case OP_IPUT: |
| case OP_IPUT_WIDE: |
| case OP_IPUT_OBJECT: |
| case OP_IPUT_BOOLEAN: |
| case OP_IPUT_BYTE: |
| case OP_IPUT_CHAR: |
| case OP_IPUT_SHORT: |
| fmt = kFmt22c; |
| break; |
| case OP_ADD_INT_LIT16: |
| case OP_RSUB_INT: |
| case OP_MUL_INT_LIT16: |
| case OP_DIV_INT_LIT16: |
| case OP_REM_INT_LIT16: |
| case OP_AND_INT_LIT16: |
| case OP_OR_INT_LIT16: |
| case OP_XOR_INT_LIT16: |
| fmt = kFmt22s; |
| break; |
| case OP_IF_EQ: |
| case OP_IF_NE: |
| case OP_IF_LT: |
| case OP_IF_GE: |
| case OP_IF_GT: |
| case OP_IF_LE: |
| fmt = kFmt22t; |
| break; |
| case OP_MOVE_FROM16: |
| case OP_MOVE_WIDE_FROM16: |
| case OP_MOVE_OBJECT_FROM16: |
| fmt = kFmt22x; |
| break; |
| case OP_CMPL_FLOAT: |
| case OP_CMPG_FLOAT: |
| case OP_CMPL_DOUBLE: |
| case OP_CMPG_DOUBLE: |
| case OP_CMP_LONG: |
| case OP_AGET: |
| case OP_AGET_WIDE: |
| case OP_AGET_OBJECT: |
| case OP_AGET_BOOLEAN: |
| case OP_AGET_BYTE: |
| case OP_AGET_CHAR: |
| case OP_AGET_SHORT: |
| case OP_APUT: |
| case OP_APUT_WIDE: |
| case OP_APUT_OBJECT: |
| case OP_APUT_BOOLEAN: |
| case OP_APUT_BYTE: |
| case OP_APUT_CHAR: |
| case OP_APUT_SHORT: |
| case OP_ADD_INT: |
| case OP_SUB_INT: |
| case OP_MUL_INT: |
| case OP_DIV_INT: |
| case OP_REM_INT: |
| case OP_AND_INT: |
| case OP_OR_INT: |
| case OP_XOR_INT: |
| case OP_SHL_INT: |
| case OP_SHR_INT: |
| case OP_USHR_INT: |
| case OP_ADD_LONG: |
| case OP_SUB_LONG: |
| case OP_MUL_LONG: |
| case OP_DIV_LONG: |
| case OP_REM_LONG: |
| case OP_AND_LONG: |
| case OP_OR_LONG: |
| case OP_XOR_LONG: |
| case OP_SHL_LONG: |
| case OP_SHR_LONG: |
| case OP_USHR_LONG: |
| case OP_ADD_FLOAT: |
| case OP_SUB_FLOAT: |
| case OP_MUL_FLOAT: |
| case OP_DIV_FLOAT: |
| case OP_REM_FLOAT: |
| case OP_ADD_DOUBLE: |
| case OP_SUB_DOUBLE: |
| case OP_MUL_DOUBLE: |
| case OP_DIV_DOUBLE: |
| case OP_REM_DOUBLE: |
| fmt = kFmt23x; |
| break; |
| case OP_CONST: |
| case OP_CONST_WIDE_32: |
| fmt = kFmt31i; |
| break; |
| case OP_CONST_STRING_JUMBO: |
| fmt = kFmt31c; |
| break; |
| case OP_MOVE_16: |
| case OP_MOVE_WIDE_16: |
| case OP_MOVE_OBJECT_16: |
| fmt = kFmt32x; |
| break; |
| case OP_FILLED_NEW_ARRAY: |
| case OP_INVOKE_VIRTUAL: |
| case OP_INVOKE_SUPER: |
| case OP_INVOKE_DIRECT: |
| case OP_INVOKE_STATIC: |
| case OP_INVOKE_INTERFACE: |
| fmt = kFmt35c; |
| break; |
| case OP_FILLED_NEW_ARRAY_RANGE: |
| case OP_INVOKE_VIRTUAL_RANGE: |
| case OP_INVOKE_SUPER_RANGE: |
| case OP_INVOKE_DIRECT_RANGE: |
| case OP_INVOKE_STATIC_RANGE: |
| case OP_INVOKE_INTERFACE_RANGE: |
| fmt = kFmt3rc; |
| break; |
| case OP_CONST_WIDE: |
| fmt = kFmt51l; |
| break; |
| |
| /* |
| * Optimized instructions. |
| */ |
| case OP_THROW_VERIFICATION_ERROR: |
| fmt = kFmt20bc; |
| break; |
| case OP_IGET_WIDE_VOLATILE: |
| case OP_IPUT_WIDE_VOLATILE: |
| case OP_IGET_VOLATILE: |
| case OP_IPUT_VOLATILE: |
| case OP_IGET_OBJECT_VOLATILE: |
| case OP_IPUT_OBJECT_VOLATILE: |
| fmt = kFmt22c; |
| break; |
| case OP_SGET_OBJECT_VOLATILE: |
| case OP_SPUT_OBJECT_VOLATILE: |
| case OP_SGET_VOLATILE: |
| case OP_SPUT_VOLATILE: |
| case OP_SGET_WIDE_VOLATILE: |
| case OP_SPUT_WIDE_VOLATILE: |
| fmt = kFmt21c; |
| break; |
| case OP_IGET_QUICK: |
| case OP_IGET_WIDE_QUICK: |
| case OP_IGET_OBJECT_QUICK: |
| case OP_IPUT_QUICK: |
| case OP_IPUT_WIDE_QUICK: |
| case OP_IPUT_OBJECT_QUICK: |
| fmt = kFmt22cs; |
| break; |
| case OP_INVOKE_VIRTUAL_QUICK: |
| case OP_INVOKE_SUPER_QUICK: |
| fmt = kFmt35ms; |
| break; |
| case OP_INVOKE_VIRTUAL_QUICK_RANGE: |
| case OP_INVOKE_SUPER_QUICK_RANGE: |
| fmt = kFmt3rms; |
| break; |
| case OP_EXECUTE_INLINE: |
| fmt = kFmt3inline; |
| break; |
| case OP_EXECUTE_INLINE_RANGE: |
| fmt = kFmt3rinline; |
| break; |
| case OP_INVOKE_DIRECT_EMPTY: |
| fmt = kFmt35c; |
| break; |
| case OP_RETURN_VOID_BARRIER: |
| fmt = kFmt10x; |
| break; |
| |
| /* these should never appear when scanning code */ |
| case OP_UNUSED_3E: |
| case OP_UNUSED_3F: |
| case OP_UNUSED_40: |
| case OP_UNUSED_41: |
| case OP_UNUSED_42: |
| case OP_UNUSED_43: |
| case OP_UNUSED_73: |
| case OP_UNUSED_79: |
| case OP_UNUSED_7A: |
| case OP_BREAKPOINT: |
| case OP_UNUSED_FF: |
| fmt = kFmtUnknown; |
| break; |
| |
| /* |
| * DO NOT add a "default" clause here. Without it the compiler will |
| * complain if an instruction is missing (which is desirable). |
| */ |
| } |
| |
| instFmt[opc] = fmt; |
| } |
| |
| return instFmt; |
| } |
| |
| /* |
| * Copied from InterpCore.h. Used for instruction decoding. |
| */ |
| #define FETCH(_offset) (insns[(_offset)]) |
| #define INST_INST(_inst) ((_inst) & 0xff) |
| #define INST_A(_inst) (((u2)(_inst) >> 8) & 0x0f) |
| #define INST_B(_inst) ((u2)(_inst) >> 12) |
| #define INST_AA(_inst) ((_inst) >> 8) |
| |
| /* |
| * Decode the instruction pointed to by "insns". |
| * |
| * Fills out the pieces of "pDec" that are affected by the current |
| * instruction. Does not touch anything else. |
| */ |
| void dexDecodeInstruction(const InstructionFormat* fmts, const u2* insns, |
| DecodedInstruction* pDec) |
| { |
| u2 inst = *insns; |
| |
| pDec->opCode = (OpCode) INST_INST(inst); |
| |
| switch (dexGetInstrFormat(fmts, pDec->opCode)) { |
| case kFmt10x: // op |
| /* nothing to do; copy the AA bits out for the verifier */ |
| pDec->vA = INST_AA(inst); |
| break; |
| case kFmt12x: // op vA, vB |
| pDec->vA = INST_A(inst); |
| pDec->vB = INST_B(inst); |
| break; |
| case kFmt11n: // op vA, #+B |
| pDec->vA = INST_A(inst); |
| pDec->vB = (s4) (INST_B(inst) << 28) >> 28; // sign extend 4-bit value |
| break; |
| case kFmt11x: // op vAA |
| pDec->vA = INST_AA(inst); |
| break; |
| case kFmt10t: // op +AA |
| pDec->vA = (s1) INST_AA(inst); // sign-extend 8-bit value |
| break; |
| case kFmt20t: // op +AAAA |
| pDec->vA = (s2) FETCH(1); // sign-extend 16-bit value |
| break; |
| case kFmt20bc: // op AA, thing@BBBB |
| case kFmt21c: // op vAA, thing@BBBB |
| case kFmt22x: // op vAA, vBBBB |
| pDec->vA = INST_AA(inst); |
| pDec->vB = FETCH(1); |
| break; |
| case kFmt21s: // op vAA, #+BBBB |
| case kFmt21t: // op vAA, +BBBB |
| pDec->vA = INST_AA(inst); |
| pDec->vB = (s2) FETCH(1); // sign-extend 16-bit value |
| break; |
| case kFmt21h: // op vAA, #+BBBB0000[00000000] |
| pDec->vA = INST_AA(inst); |
| /* |
| * The value should be treated as right-zero-extended, but we don't |
| * actually do that here. Among other things, we don't know if it's |
| * the top bits of a 32- or 64-bit value. |
| */ |
| pDec->vB = FETCH(1); |
| break; |
| case kFmt23x: // op vAA, vBB, vCC |
| pDec->vA = INST_AA(inst); |
| pDec->vB = FETCH(1) & 0xff; |
| pDec->vC = FETCH(1) >> 8; |
| break; |
| case kFmt22b: // op vAA, vBB, #+CC |
| pDec->vA = INST_AA(inst); |
| pDec->vB = FETCH(1) & 0xff; |
| pDec->vC = (s1) (FETCH(1) >> 8); // sign-extend 8-bit value |
| break; |
| case kFmt22s: // op vA, vB, #+CCCC |
| case kFmt22t: // op vA, vB, +CCCC |
| pDec->vA = INST_A(inst); |
| pDec->vB = INST_B(inst); |
| pDec->vC = (s2) FETCH(1); // sign-extend 16-bit value |
| break; |
| case kFmt22c: // op vA, vB, thing@CCCC |
| case kFmt22cs: // [opt] op vA, vB, field offset CCCC |
| pDec->vA = INST_A(inst); |
| pDec->vB = INST_B(inst); |
| pDec->vC = FETCH(1); |
| break; |
| case kFmt30t: // op +AAAAAAAA |
| pDec->vA = FETCH(1) | ((u4) FETCH(2) << 16); // signed 32-bit value |
| break; |
| case kFmt31t: // op vAA, +BBBBBBBB |
| case kFmt31c: // op vAA, thing@BBBBBBBB |
| pDec->vA = INST_AA(inst); |
| pDec->vB = FETCH(1) | ((u4) FETCH(2) << 16); // 32-bit value |
| break; |
| case kFmt32x: // op vAAAA, vBBBB |
| pDec->vA = FETCH(1); |
| pDec->vB = FETCH(2); |
| break; |
| case kFmt31i: // op vAA, #+BBBBBBBB |
| pDec->vA = INST_AA(inst); |
| pDec->vB = FETCH(1) | ((u4) FETCH(2) << 16); |
| break; |
| case kFmt35c: // op vB, {vD..vG,vA}, thing@CCCC |
| case kFmt35ms: // [opt] invoke-virtual+super |
| { |
| /* |
| * The lettering changes that came about when we went from 4 args |
| * to 5 made the "range" versions of the calls different from |
| * the non-range versions. We have the choice between decoding |
| * them the way the spec shows and having lots of conditionals |
| * in the verifier, or mapping the values onto their original |
| * registers and leaving the verifier intact. |
| * |
| * Current plan is to leave the verifier alone. We can fix it |
| * later if it's architecturally unbearable. |
| * |
| * Bottom line: method constant is always in vB. |
| */ |
| u2 regList; |
| int i, count; |
| |
| pDec->vA = INST_B(inst); |
| pDec->vB = FETCH(1); |
| regList = FETCH(2); |
| |
| if (pDec->vA > 5) { |
| LOGW("Invalid arg count in 35c/35ms (%d)\n", pDec->vA); |
| goto bail; |
| } |
| count = pDec->vA; |
| if (count == 5) { |
| /* 5th arg comes from A field in instruction */ |
| pDec->arg[4] = INST_A(inst); |
| count--; |
| } |
| for (i = 0; i < count; i++) { |
| pDec->arg[i] = regList & 0x0f; |
| regList >>= 4; |
| } |
| /* copy arg[0] to vC; we don't have vD/vE/vF, so ignore those */ |
| if (pDec->vA > 0) |
| pDec->vC = pDec->arg[0]; |
| } |
| break; |
| case kFmt3inline: // [opt] inline invoke |
| { |
| u2 regList; |
| int i; |
| |
| pDec->vA = INST_B(inst); |
| pDec->vB = FETCH(1); |
| regList = FETCH(2); |
| |
| if (pDec->vA > 4) { |
| LOGW("Invalid arg count in 3inline (%d)\n", pDec->vA); |
| goto bail; |
| } |
| for (i = 0; i < (int) pDec->vA; i++) { |
| pDec->arg[i] = regList & 0x0f; |
| regList >>= 4; |
| } |
| /* copy arg[0] to vC; we don't have vD/vE/vF, so ignore those */ |
| if (pDec->vA > 0) |
| pDec->vC = pDec->arg[0]; |
| } |
| break; |
| case kFmt35fs: // [opt] invoke-interface |
| assert(false); // TODO |
| break; |
| case kFmt3rc: // op {vCCCC .. v(CCCC+AA-1)}, meth@BBBB |
| case kFmt3rms: // [opt] invoke-virtual+super/range |
| case kFmt3rinline: // [opt] execute-inline/range |
| pDec->vA = INST_AA(inst); |
| pDec->vB = FETCH(1); |
| pDec->vC = FETCH(2); |
| break; |
| case kFmt3rfs: // [opt] invoke-interface/range |
| assert(false); // TODO |
| break; |
| case kFmt51l: // op vAA, #+BBBBBBBBBBBBBBBB |
| pDec->vA = INST_AA(inst); |
| pDec->vB_wide = FETCH(1); |
| pDec->vB_wide |= (u8)FETCH(2) << 16; |
| pDec->vB_wide |= (u8)FETCH(3) << 32; |
| pDec->vB_wide |= (u8)FETCH(4) << 48; |
| break; |
| default: |
| LOGW("Can't decode unexpected format %d (op=%d)\n", |
| dexGetInstrFormat(fmts, pDec->opCode), pDec->opCode); |
| assert(false); |
| break; |
| } |
| |
| bail: |
| ; |
| } |
| |
| /* |
| * Return the width of the specified instruction, or 0 if not defined. Also |
| * works for special OP_NOP entries, including switch statement data tables |
| * and array data. |
| */ |
| size_t dexGetInstrOrTableWidthAbs(const InstructionWidth* widths, |
| const u2* insns) |
| { |
| size_t width; |
| |
| if (*insns == kPackedSwitchSignature) { |
| width = 4 + insns[1] * 2; |
| } else if (*insns == kSparseSwitchSignature) { |
| width = 2 + insns[1] * 4; |
| } else if (*insns == kArrayDataSignature) { |
| u2 elemWidth = insns[1]; |
| u4 len = insns[2] | (((u4)insns[3]) << 16); |
| width = 4 + (elemWidth * len + 1) / 2; |
| } else { |
| width = dexGetInstrWidthAbs(widths, INST_INST(insns[0])); |
| } |
| return width; |
| } |