| # Copyright 1999-2015 ImageMagick Studio LLC, a non-profit organization |
| # dedicated to making software imaging solutions freely available. |
| # |
| # You may not use this file except in compliance with the License. You may |
| # obtain a copy of the License at |
| # |
| # http://www.imagemagick.org/script/license.php |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| # Exercise all regression tests: |
| # |
| # make test |
| # |
| # Exersise one regression test: |
| # |
| # make TEST_VERBOSE=1 TEST_FILES=t/filter.t test |
| # |
| |
| use ExtUtils::MakeMaker; |
| use Config; |
| use File::Spec::Functions qw/catfile catdir devnull catpath splitpath/; |
| use Cwd; |
| |
| sub AutodetectWin32gcc { |
| my $wrkdir = getcwd(); |
| my $devnull = devnull(); |
| |
| my @incdir = (); |
| my @libdir = ($wrkdir); |
| my @bindir = (); |
| |
| #try to get configuration info via identify or convert utilities |
| my $conf = `identify -list Configure 2>$devnull` || `convert -list Configure 2>$devnull`; |
| foreach my $line (split '\n', $conf) { |
| if ($line =~ /^Path:\s+(.*)/) { |
| my ($vol,$dir,$file) = splitpath($1); |
| next unless $dir; |
| my $dirpath = catpath( $vol, $dir); |
| my (@l,@b,@i) = ( (),(),() ); |
| |
| # try to detect 'lib' dir |
| push @l, catfile($dirpath,'lib'); |
| push @l, catfile($dirpath,'..','lib'); |
| push @l, catfile($dirpath,'..','..','lib'); |
| push @l, catfile($dirpath,'..','..','..','lib'); |
| foreach (@l) { push @libdir, $_ if (-d $_) }; |
| |
| # try to detect 'bin' dir |
| push @b, catfile($dirpath); |
| push @b, catfile($dirpath,'bin'); |
| push @b, catfile($dirpath,'..'); |
| push @b, catfile($dirpath,'..','bin'); |
| push @b, catfile($dirpath,'..','..'); |
| push @b, catfile($dirpath,'..','..','bin'); |
| push @b, catfile($dirpath,'..','..','..'); |
| push @b, catfile($dirpath,'..','..','..','bin'); |
| foreach (@b) { push @bindir, $_ if (-e "$_/convert.exe" || -e "$_/identify.exe") }; |
| |
| # try to detect 'include' dir |
| push @i, catfile($dirpath,'include'); |
| push @i, catfile($dirpath,'include','ImageMagick'); |
| push @i, catfile($dirpath,'..','include'); |
| push @i, catfile($dirpath,'..','include','ImageMagick'); |
| push @i, catfile($dirpath,'..','..','include'); |
| push @i, catfile($dirpath,'..','..','include','ImageMagick'); |
| push @i, catfile($dirpath,'..','..','..','include'); |
| push @i, catfile($dirpath,'..','..','..','include','ImageMagick'); |
| foreach (@i) { push @incdir, $_ if (-e "$_/MagickCore/MagickCore.h") }; |
| } |
| }; |
| |
| foreach my $bin (@bindir) { |
| opendir(my $bindir, $bin) or die qq{Cannot opendir $bin: $!}; |
| my @dlls = map {catfile($bin, $_)} grep /^\S*magick[^\+]\S*?\.dll$/i, readdir $bindir; |
| foreach my $d (@dlls) { |
| unlink "$wrkdir/libMagickCore.def", "$wrkdir/libMagickCore.a"; |
| system("pexports \"$d\" >\"$wrkdir/libMagickCore.def\" 2>$devnull"); |
| open(DEF, "<$wrkdir/libMagickCore.def"); |
| my @found = grep(/MagickCoreGenesis/, <DEF>); #checking if we have taken the right DLL |
| close(DEF); |
| next unless(@found); |
| print STDERR "Gonna create 'libMagickCore.a' from '$d'\n"; |
| system("dlltool -D \"$d\" -d \"$wrkdir/libMagickCore.def\" -l \"$wrkdir/libMagickCore.a\" 2>$devnull"); |
| last if -s "$wrkdir/libMagickCore.a"; |
| } |
| last if -s "$wrkdir/libMagickCore.a"; |
| } |
| |
| unless(@incdir && @libdir && @bindir && (-s "$wrkdir/libMagickCore.a")) { |
| print STDERR <<EOF |
| ################################### WARNING! ################################### |
| # It seems that you are trying to install Perl::Magick on a MS Windows box with |
| # perl + gcc compiler (e.g. strawberry perl), however we cannot find ImageMagick |
| # binaries installed on your system. |
| # |
| # Please check the following prerequisites: |
| # |
| # 1) You need to have installed ImageMagick Windows binaries from |
| # http://www.imagemagick.org/script/binary-releases.php#windows |
| # |
| # 2) We only support dynamic (DLL) ImageMagick binaries |
| # note: it is not possible to mix 32/64-bit binaries of perl and ImageMagick |
| # |
| # 3) During installation select that you want to install ImageMagick's |
| # development files (libraries+headers) |
| # |
| # 4) You also need to have ImageMagick's directory in your PATH |
| # note: we are checking the presence of convert.exe and/or identify.exe tools |
| # |
| # 5) You might need Visual C++ Redistributable Package installed on your system |
| # see instructions on ImageMagick's Binary Release webpage |
| # |
| # We are gonna continue, but chances for successful build are very low! |
| ################################################################################ |
| EOF |
| } |
| |
| my $inc = join ' ', map "-I\"$_\"", @incdir; |
| my $lib = join ' ', map "-L\"$_\"", @libdir; |
| |
| return ($inc, $lib); |
| } |
| |
| sub AutodetectDelegates { |
| #try to get configuration info via identify or convert utilities |
| my $devnull = devnull(); |
| my $conf = `identify -list Configure 2>$devnull` || `convert -list Configure 2>$devnull`; |
| my @delegates = (); |
| foreach my $line (split '\n', $conf) { |
| next unless $line =~ /^DELEGATES\s+/; |
| (undef, @delegates) = split /\s+/, $line; |
| last; |
| }; |
| return @delegates; |
| } |
| |
| # Compute test specification |
| my $delegate_tests='t/*.t'; |
| my @tested_delegates = qw/bzlib djvu fftw fontconfig freetype jpeg jng openjp2 lcms png rsvg tiff x11 xml wmf zlib/; |
| my @supported_delegates = AutodetectDelegates(); |
| # find the intersection of tested and supported delegates |
| my %seen_delegates = (); |
| $seen_delegates{$_}++ for @supported_delegates; |
| foreach my $delegate (@tested_delegates) { |
| if ( $seen_delegates{$delegate} ) { |
| if ( -d "t/$delegate" ) { |
| if ( defined($ENV{'DISPLAY'}) && ($^O ne 'MSWin32') ) { |
| if ( defined $ENV{'DISPLAY'} ) { |
| $delegate_tests .= " t/$delegate/*.t"; |
| } |
| next; |
| } |
| $delegate_tests .= " t/$delegate/*.t"; |
| } |
| } |
| } |
| |
| # defaults for LIBS & INC & CCFLAGS params that we later pass to Writemakefile |
| my $INC_magick = '-I../ -I@top_srcdir@ @CPPFLAGS@ -I"' . $Config{'usrinc'} . '/ImageMagick"'; |
| my $LIBS_magick = '-L../MagickCore/.libs -lMagickCore-@MAGICK_MAJOR_VERSION@.@MAGICK_ABI_SUFFIX@ -lperl @MATH_LIBS@'; |
| my $CCFLAGS_magick = "$Config{'ccflags'} @CFLAGS@"; |
| my $LDFLAGS_magick = "-L../MagickCore/.libs -lMagickCore-@MAGICK_MAJOR_VERSION@.@MAGICK_ABI_SUFFIX@ $Config{'ldflags'} @LDFLAGS@"; |
| my $LDDLFLAGS_magick = "-L../MagickCore/.libs -lMagickCore-@MAGICK_MAJOR_VERSION@.@MAGICK_ABI_SUFFIX@ $Config{'lddlflags'} @LDFLAGS@"; |
| |
| if (($^O eq 'MSWin32') && ($Config{cc} =~ /gcc/)) { |
| my($Ipaths, $Lpaths) = AutodetectWin32gcc(); |
| |
| # |
| # Setup for strawberry perl. |
| # |
| $INC_magick = "$Ipaths"; |
| $LIBS_magick = "-lMagickCore-@MAGICK_MAJOR_VERSION@.@MAGICK_ABI_SUFFIX@"; |
| $CCFLAGS_magick = "$Config{'ccflags'}"; |
| $LDFLAGS_magick = "$Config{'ldflags'} $Lpaths "; |
| $LDDLFLAGS_magick = "$Config{'lddlflags'} $Lpaths "; |
| } |
| |
| # See lib/ExtUtils/MakeMaker.pm for details of how to influence |
| # the contents of the Makefile that is written. |
| WriteMakefile |
| ( |
| # Module description |
| 'ABSTRACT' => 'ImageMagick PERL Extension', |
| |
| # Perl module name is Image::Magick |
| 'NAME' => 'Image::Magick', |
| |
| # Module author |
| 'AUTHOR' => 'ImageMagick Studio LLC', |
| |
| # Module version |
| 'VERSION' => '@PACKAGE_PERL_VERSION@', |
| |
| # Prerequisite version |
| 'PREREQ_PM' => {'parent' => '0'}, |
| |
| # Preprocessor defines |
| 'DEFINE' => '@LFS_CPPFLAGS@ @DEFS@', # e.g., '-DHAVE_SOMETHING' |
| |
| # Header search specfication and preprocessor flags |
| 'INC' => $INC_magick, |
| |
| # C compiler |
| #'CC' => '@CC@', |
| |
| # C pre-processor flags (e.g. -I & -D options) |
| # 'CPPFLAGS' => "$Config{'cppflags'} @CPPFLAGS@", |
| |
| # C compiler flags (e.g. -O -g) |
| 'CCFLAGS' => $CCFLAGS_magick, |
| |
| # Linker |
| #'LD' => $Config{'ld'} == $Config{'cc'} ? '@CC@' : $Config{'ld'}, |
| |
| # Linker flags for building an executable |
| 'LDFLAGS' => $LDFLAGS_magick, |
| |
| # Linker flags for building a dynamically loadable module |
| 'LDDLFLAGS' => $LDDLFLAGS_magick, |
| |
| # Install PerlMagick binary into ImageMagick bin directory |
| 'INSTALLBIN' => '@BIN_DIR@', |
| |
| # Library specification |
| 'LIBS' => [ $LIBS_magick ], |
| |
| # Perl binary name (if a Perl binary is built) |
| 'MAP_TARGET' => 'PerlMagick', |
| |
| # Let CFLAGS drive optimization flags by setting OPTIMIZE to empty |
| # 'OPTIMIZE' => '', |
| |
| # Use same compiler as ImageMagick |
| 'PERLMAINCC' => '@PERLMAINCC@ @OPENMP_CFLAGS@', |
| 'AR' => '@AR@', |
| 'LD' => '@PERLMAINCC@', |
| |
| # Set Perl installation prefix to ImageMagick installation prefix |
| # 'PREFIX' => '@prefix@', |
| |
| # Include delegate directories in tests |
| test => { TESTS => $delegate_tests}, |
| |
| ($Config{'archname'} =~ /-object$/i ? ('CAPI' => 'TRUE') : ()), |
| |
| # sane version |
| depend => { '$(FIRST_MAKEFILE)' => '$(VERSION_FROM)' } |
| ); |
| |
| |
| # |
| # Substitutions for "makeaperl" section. |
| # |
| sub MY::makeaperl { |
| package MY; # so that "SUPER" works right |
| my $inherited = shift->SUPER::makeaperl(@_); |
| |
| # Stinky ExtUtils::MM_Unix likes to append its own library path to $(CC), |
| # prior to any user-specified library path so that an installed library is |
| # used rather than the library just built. This substitution function |
| # tries to insert our library path first. Also, use the same compiler used |
| # to build perlmain.c to link so that a C++ compiler may be used if |
| # necessary. |
| $inherited =~ s:MAP_LINKCMD\s.*\s*\$\(CC\):MAP_LINKCMD = \$(PERLMAINCC) -L@MAGICKCORE_PATH@: ; |
| $inherited; |
| } |