| /*! |
| * \file opencsd/ocsd_if_types.h |
| * \brief OpenCSD : Standard Types used in the library interfaces. |
| * |
| * \copyright Copyright (c) 2015, ARM Limited. All Rights Reserved. |
| */ |
| |
| /* |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its contributors |
| * may be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef ARM_OCSD_IF_TYPES_H_INCLUDED |
| #define ARM_OCSD_IF_TYPES_H_INCLUDED |
| |
| #include <stdint.h> |
| #include <stddef.h> |
| #if defined(_MSC_VER) && (_MSC_VER < 1900) |
| /** VS2010 does not support inttypes - remove when VS2010 support is dropped */ |
| #define __PRI64_PREFIX "ll" |
| #define PRIX64 __PRI64_PREFIX "X" |
| #define PRIu64 __PRI64_PREFIX "u" |
| #define PRIu32 "u" |
| #else |
| #include <inttypes.h> |
| #endif |
| |
| |
| /** @defgroup ocsd_interfaces OpenCSD Library : Interfaces |
| @brief Set of types, structures and virtual interface classes making up the primary API |
| |
| Set of component interfaces that connect various source reader and decode components into a |
| decode tree to allow trace decode for the trace data being output by the source reader. |
| |
| @{*/ |
| |
| |
| |
| /** @name Trace Indexing and Channel IDs |
| @{*/ |
| #ifdef ENABLE_LARGE_TRACE_SOURCES |
| typedef uint64_t ocsd_trc_index_t; /**< Trace source index type - 64 bit size */ |
| #define OCSD_TRC_IDX_STR PRIu64 |
| #else |
| typedef uint32_t ocsd_trc_index_t; /**< Trace source index type - 32 bit size */ |
| #define OCSD_TRC_IDX_STR PRIu32 |
| #endif |
| |
| /** Invalid trace index value */ |
| #define OCSD_BAD_TRC_INDEX ((ocsd_trc_index_t)-1) |
| /** Invalid trace source ID value */ |
| #define OCSD_BAD_CS_SRC_ID ((uint8_t)-1) |
| /** macro returing true if trace source ID is in valid range (0x0 < ID < 0x70) */ |
| #define OCSD_IS_VALID_CS_SRC_ID(id) ((id > 0) && (id < 0x70)) |
| /** macro returing true if trace source ID is in reserved range (ID == 0x0 || 0x70 <= ID <= 0x7F) */ |
| #define OCSD_IS_RESERVED_CS_SRC_ID(id) ((id == 0) || ((id >= 0x70) && (id <= 0x7F)) |
| /** @}*/ |
| |
| /** @name General Library Return and Error Codes |
| @{*/ |
| |
| /** Library Error return type */ |
| typedef enum _ocsd_err_t { |
| |
| /* general return errors */ |
| OCSD_OK = 0, /**< No Error. */ |
| OCSD_ERR_FAIL, /**< General systemic failure. */ |
| OCSD_ERR_MEM, /**< Internal memory allocation error. */ |
| OCSD_ERR_NOT_INIT, /**< Component not initialised or initialisation failure. */ |
| OCSD_ERR_INVALID_ID, /**< Invalid CoreSight Trace Source ID. */ |
| OCSD_ERR_BAD_HANDLE, /**< Invalid handle passed to component. */ |
| OCSD_ERR_INVALID_PARAM_VAL, /**< Invalid value parameter passed to component. */ |
| OCSD_ERR_INVALID_PARAM_TYPE, /**< Type mismatch on abstract interface */ |
| OCSD_ERR_FILE_ERROR, /**< File access error */ |
| OCSD_ERR_NO_PROTOCOL, /**< Trace protocol unsupported */ |
| /* attachment point errors */ |
| OCSD_ERR_ATTACH_TOO_MANY, /**< Cannot attach - attach device limit reached. */ |
| OCSD_ERR_ATTACH_INVALID_PARAM, /**< Cannot attach - invalid parameter. */ |
| OCSD_ERR_ATTACH_COMP_NOT_FOUND,/**< Cannot detach - component not found. */ |
| /* source reader errors */ |
| OCSD_ERR_RDR_FILE_NOT_FOUND, /**< source reader - file not found. */ |
| OCSD_ERR_RDR_INVALID_INIT, /**< source reader - invalid initialisation parameter. */ |
| OCSD_ERR_RDR_NO_DECODER, /**< source reader - not trace decoder set. */ |
| /* data path errors */ |
| OCSD_ERR_DATA_DECODE_FATAL, /**< A decoder in the data path has returned a fatal error. */ |
| /* frame deformatter errors */ |
| OCSD_ERR_DFMTR_NOTCONTTRACE, /**< Trace input to deformatter none-continuous */ |
| /* packet processor errors - protocol issues etc */ |
| OCSD_ERR_BAD_PACKET_SEQ, /**< Bad packet sequence */ |
| OCSD_ERR_INVALID_PCKT_HDR, /**< Invalid packet header */ |
| OCSD_ERR_PKT_INTERP_FAIL, /**< Interpreter failed - cannot recover - bad data or sequence */ |
| /* packet decoder errors */ |
| OCSD_ERR_UNSUPPORTED_ISA, /**< ISA not supported in decoder. */ |
| OCSD_ERR_HW_CFG_UNSUPP, /**< Programmed trace configuration not supported by decoder.*/ |
| OCSD_ERR_UNSUPP_DECODE_PKT, /**< Packet not supported in decoder */ |
| OCSD_ERR_BAD_DECODE_PKT, /**< reserved or unknown packet in decoder. */ |
| OCSD_ERR_COMMIT_PKT_OVERRUN, /**< overrun in commit packet stack - tried to commit more than available */ |
| OCSD_ERR_MEM_NACC, /**< unable to access required memory address */ |
| OCSD_ERR_RET_STACK_OVERFLOW, /**< internal return stack overflow checks failed - popped more than we pushed. */ |
| /* decode tree errors */ |
| OCSD_ERR_DCDT_NO_FORMATTER, /**< No formatter in use - operation not valid. */ |
| /* target memory access errors */ |
| OCSD_ERR_MEM_ACC_OVERLAP, /**< Attempted to set an overlapping range in memory access map */ |
| OCSD_ERR_MEM_ACC_FILE_NOT_FOUND, /**< Memory access file could not be opened */ |
| OCSD_ERR_MEM_ACC_FILE_DIFF_RANGE, /**< Attempt to re-use the same memory access file for a different address range */ |
| OCSD_ERR_MEM_ACC_RANGE_INVALID, /**< Address range in accessor set to invalid values */ |
| /* test errors - errors generated only by the test code, not the library */ |
| OCSD_ERR_TEST_SNAPSHOT_PARSE, /**< test snapshot file parse error */ |
| OCSD_ERR_TEST_SNAPSHOT_PARSE_INFO, /**< test snapshot file parse information */ |
| OCSD_ERR_TEST_SNAPSHOT_READ, /**< test snapshot reader error */ |
| OCSD_ERR_TEST_SS_TO_DECODER, /**< test snapshot to decode tree conversion error */ |
| /* decoder registration */ |
| OCSD_ERR_DCDREG_NAME_REPEAT, /**< attempted to register a decoder with the same name as another one */ |
| OCSD_ERR_DCDREG_NAME_UNKNOWN, /**< attempted to find a decoder with a name that is not known in the library */ |
| OCSD_ERR_DCDREG_TYPE_UNKNOWN, /**< attempted to find a decoder with a type that is not known in the library */ |
| OCSD_ERR_DCDREG_TOOMANY, /**< attempted to register too many custom decoders */ |
| /* decoder config */ |
| OCSD_ERR_DCD_INTERFACE_UNUSED, /**< Attempt to connect or use and interface not supported by this decoder. */ |
| /* end marker*/ |
| OCSD_ERR_LAST |
| } ocsd_err_t; |
| |
| /* component handle types */ |
| typedef unsigned int ocsd_hndl_rdr_t; /**< reader control handle */ |
| typedef unsigned int ocsd_hndl_err_log_t; /**< error logger connection handle */ |
| |
| /* common invalid handle type */ |
| #define OCSD_INVALID_HANDLE (unsigned int)-1 /**< Global invalid handle value */ |
| |
| /*! Error Severity Type |
| * |
| * Used to indicate the severity of an error, and also as the |
| * error log verbosity level in the error logger. |
| * |
| * The logger will ignore errors with a severity value higher than the |
| * current verbosity level. |
| * |
| * The value OCSD_ERR_SEV_NONE can only be used as a verbosity level to switch off logging, |
| * not as a severity value on an error. The other values can be used as both error severity and |
| * logger verbosity values. |
| */ |
| typedef enum _ocsd_err_severity_t { |
| OCSD_ERR_SEV_NONE, /**< No error logging. */ |
| OCSD_ERR_SEV_ERROR, /**< Most severe error - perhaps fatal. */ |
| OCSD_ERR_SEV_WARN, /**< Warning level. Inconsistent or incorrect data seen but can carry on decode processing */ |
| OCSD_ERR_SEV_INFO, /**< Information only message. Use for debugging code or suspect input data. */ |
| } ocsd_err_severity_t; |
| |
| /** @}*/ |
| |
| /** @name Trace Datapath |
| @{*/ |
| |
| /** Trace Datapath operations. |
| */ |
| typedef enum _ocsd_datapath_op_t { |
| OCSD_OP_DATA = 0, /**< Standard index + data packet */ |
| OCSD_OP_EOT, /**< End of available trace data. No data packet. */ |
| OCSD_OP_FLUSH, /**< Flush existing data where possible, retain decode state. No data packet. */ |
| OCSD_OP_RESET, /**< Reset decode state - drop any existing partial data. No data packet. */ |
| } ocsd_datapath_op_t; |
| |
| /** |
| * Trace Datapath responses |
| */ |
| typedef enum _ocsd_datapath_resp_t { |
| OCSD_RESP_CONT, /**< Continue processing */ |
| OCSD_RESP_WARN_CONT, /**< Continue processing : a component logged a warning. */ |
| OCSD_RESP_ERR_CONT, /**< Continue processing : a component logged an error.*/ |
| OCSD_RESP_WAIT, /**< Pause processing */ |
| OCSD_RESP_WARN_WAIT, /**< Pause processing : a component logged a warning. */ |
| OCSD_RESP_ERR_WAIT, /**< Pause processing : a component logged an error. */ |
| OCSD_RESP_FATAL_NOT_INIT, /**< Processing Fatal Error : component unintialised. */ |
| OCSD_RESP_FATAL_INVALID_OP, /**< Processing Fatal Error : invalid data path operation. */ |
| OCSD_RESP_FATAL_INVALID_PARAM, /**< Processing Fatal Error : invalid parameter in datapath call. */ |
| OCSD_RESP_FATAL_INVALID_DATA, /**< Processing Fatal Error : invalid trace data */ |
| OCSD_RESP_FATAL_SYS_ERR, /**< Processing Fatal Error : internal system error. */ |
| } ocsd_datapath_resp_t; |
| |
| /*! Macro returning true if datapath response value is FATAL. */ |
| #define OCSD_DATA_RESP_IS_FATAL(x) (x >= OCSD_RESP_FATAL_NOT_INIT) |
| /*! Macro returning true if datapath response value indicates WARNING logged. */ |
| #define OCSD_DATA_RESP_IS_WARN(x) ((x == OCSD_RESP_WARN_CONT) || (x == OCSD_RESP_WARN_WAIT)) |
| /*! Macro returning true if datapath response value indicates ERROR logged. */ |
| #define OCSD_DATA_RESP_IS_ERR(x) ((x == OCSD_RESP_ERR_CONT) || (x == OCSD_RESP_ERR_WAIT)) |
| /*! Macro returning true if datapath response value indicates WARNING or ERROR logged. */ |
| #define OCSD_DATA_RESP_IS_WARN_OR_ERR(x) (OCSD_DATA_RESP_IS_ERR(x) || OCSD_DATA_RESP_IS_WARN(x)) |
| /*! Macro returning true if datapath response value is CONT. */ |
| #define OCSD_DATA_RESP_IS_CONT(x) (x < OCSD_RESP_WAIT) |
| /*! Macro returning true if datapath response value is WAIT. */ |
| #define OCSD_DATA_RESP_IS_WAIT(x) ((x >= OCSD_RESP_WAIT) && (x < OCSD_RESP_FATAL_NOT_INIT)) |
| |
| /** @}*/ |
| |
| /** @name Trace Decode component types |
| @{*/ |
| |
| |
| /** Raw frame element data types |
| Data blocks types output from ITrcRawFrameIn. |
| */ |
| typedef enum _rcdtl_rawframe_elem_t { |
| OCSD_FRM_NONE, /**< None data operation on data path. (EOT etc.) */ |
| OCSD_FRM_PACKED, /**< Raw packed frame data */ |
| OCSD_FRM_HSYNC, /**< HSYNC data */ |
| OCSD_FRM_FSYNC, /**< Frame Sync Data */ |
| OCSD_FRM_ID_DATA, /**< unpacked data for ID */ |
| } ocsd_rawframe_elem_t; |
| |
| |
| /** Indicates if the trace source will be frame formatted or a single protocol source. |
| Used in decode tree creation and configuration code. |
| */ |
| typedef enum _ocsd_dcd_tree_src_t { |
| OCSD_TRC_SRC_FRAME_FORMATTED, /**< input source is frame formatted. */ |
| OCSD_TRC_SRC_SINGLE, /**< input source is from a single protocol generator. */ |
| } ocsd_dcd_tree_src_t; |
| |
| #define OCSD_DFRMTR_HAS_FSYNCS 0x01 /**< Deformatter Config : formatted data has fsyncs - input data 4 byte aligned */ |
| #define OCSD_DFRMTR_HAS_HSYNCS 0x02 /**< Deformatter Config : formatted data has hsyncs - input data 2 byte aligned */ |
| #define OCSD_DFRMTR_FRAME_MEM_ALIGN 0x04 /**< Deformatter Config : formatted frames are memory aligned, no syncs. Input data 16 byte frame aligned. */ |
| #define OCSD_DFRMTR_PACKED_RAW_OUT 0x08 /**< Deformatter Config : output raw packed frame data if raw monitor attached. */ |
| #define OCSD_DFRMTR_UNPACKED_RAW_OUT 0x10 /**< Deformatter Config : output raw unpacked frame data if raw monitor attached. */ |
| #define OCSD_DFRMTR_RESET_ON_4X_FSYNC 0x20 /**< Deformatter Config : reset downstream decoders if frame aligned 4x consecutive fsyncs spotted. (perf workaround) */ |
| #define OCSD_DFRMTR_VALID_MASK 0x3F /**< Deformatter Config : valid mask for deformatter configuration */ |
| |
| #define OCSD_DFRMTR_FRAME_SIZE 0x10 /**< CoreSight frame formatter frame size constant in bytes. */ |
| |
| /** @}*/ |
| |
| /** @name Trace Decode Component Name Prefixes |
| * |
| * Set of standard prefixes to be used for component names |
| @{*/ |
| |
| /** Component name prefix for trace source reader components */ |
| #define OCSD_CMPNAME_PREFIX_SOURCE_READER "SRDR" |
| /** Component name prefix for trace frame deformatter component */ |
| #define OCSD_CMPNAME_PREFIX_FRAMEDEFORMATTER "DFMT" |
| /** Component name prefix for trace packet processor. */ |
| #define OCSD_CMPNAME_PREFIX_PKTPROC "PKTP" |
| /** Component name prefix for trace packet decoder. */ |
| #define OCSD_CMPNAME_PREFIX_PKTDEC "PDEC" |
| |
| /** @}*/ |
| |
| /** @name Trace Decode Arch and Profile |
| @{*/ |
| |
| /** Core Architecture Version */ |
| typedef enum _ocsd_arch_version { |
| ARCH_UNKNOWN, /**< unknown architecture */ |
| ARCH_V7, /**< V7 architecture */ |
| ARCH_V8, /**< V8 architecture */ |
| ARCH_CUSTOM, /**< None ARM, custom architecture */ |
| } ocsd_arch_version_t; |
| |
| /** Core Profile */ |
| typedef enum _ocsd_core_profile { |
| profile_Unknown, /**< Unknown profile */ |
| profile_CortexM, /**< Cortex-M profile */ |
| profile_CortexR, /**< Cortex-R profile */ |
| profile_CortexA, /**< Cortex-A profile */ |
| profile_Custom, /**< None ARM, custom arch profile */ |
| } ocsd_core_profile_t; |
| |
| /** Combined architecture and profile descriptor for a core */ |
| typedef struct _ocsd_arch_profile_t { |
| ocsd_arch_version_t arch; /**< core architecture */ |
| ocsd_core_profile_t profile; /**< core profile */ |
| } ocsd_arch_profile_t; |
| |
| /* may want to use a 32 bit v-addr when running on 32 bit only ARM platforms. */ |
| #ifdef USE_32BIT_V_ADDR |
| typedef uint32_t ocsd_vaddr_t; /**< 32 bit virtual addressing in library - use if compiling on 32 bit platforms */ |
| #define OCSD_MAX_VA_BITSIZE 32 /**< 32 bit Virtual address bitsize macro */ |
| #define OCSD_VA_MASK ~0UL /**< 32 bit Virtual address bitsize mask */ |
| #else |
| typedef uint64_t ocsd_vaddr_t; /**< 64 bit virtual addressing in library */ |
| #define OCSD_MAX_VA_BITSIZE 64 /**< 64 bit Virtual address bitsize macro */ |
| #define OCSD_VA_MASK ~0ULL /**< 64 bit Virtual address bitsize mask */ |
| #endif |
| |
| /** A bit mask for the first 'bits' consecutive bits of an address */ |
| #define OCSD_BIT_MASK(bits) (bits == OCSD_MAX_VA_BITSIZE) ? OCSD_VA_MASK : ((ocsd_vaddr_t)1 << bits) - 1 |
| |
| /** @}*/ |
| |
| /** @name Instruction Decode Information |
| @{*/ |
| |
| /** Instruction Set Architecture type |
| * |
| */ |
| typedef enum _ocsd_isa |
| { |
| ocsd_isa_arm, /**< V7 ARM 32, V8 AArch32 */ |
| ocsd_isa_thumb2, /**< Thumb2 -> 16/32 bit instructions */ |
| ocsd_isa_aarch64, /**< V8 AArch64 */ |
| ocsd_isa_tee, /**< Thumb EE - unsupported */ |
| ocsd_isa_jazelle, /**< Jazelle - unsupported in trace */ |
| ocsd_isa_custom, /**< Instruction set - custom arch decoder */ |
| ocsd_isa_unknown /**< ISA not yet known */ |
| } ocsd_isa; |
| |
| /** Security level type |
| */ |
| typedef enum _ocsd_sec_level |
| { |
| ocsd_sec_secure, /**< Core is in secure state */ |
| ocsd_sec_nonsecure /**< Core is in non-secure state */ |
| } ocsd_sec_level ; |
| |
| /** Exception level type |
| */ |
| typedef enum _ocsd_ex_level |
| { |
| ocsd_EL_unknown = -1, /**< EL unknown / unsupported in trace */ |
| ocsd_EL0 = 0, /**< EL0 */ |
| ocsd_EL1, /**< EL1 */ |
| ocsd_EL2, /**< EL2 */ |
| ocsd_EL3, /**< EL3 */ |
| } ocsd_ex_level; |
| |
| |
| /** instruction types - significant for waypoint calculaitons */ |
| typedef enum _ocsd_instr_type { |
| OCSD_INSTR_OTHER, /**< Other instruction - not significant for waypoints. */ |
| OCSD_INSTR_BR, /**< Immediate Branch instruction */ |
| OCSD_INSTR_BR_INDIRECT, /**< Indirect Branch instruction */ |
| OCSD_INSTR_ISB, /**< Barrier : ISB instruction */ |
| OCSD_INSTR_DSB_DMB /**< Barrier : DSB or DMB instruction */ |
| } ocsd_instr_type; |
| |
| /** instruction sub types - addiitonal information passed to the output packets |
| for trace analysis tools. |
| */ |
| typedef enum _ocsd_instr_subtype { |
| OCSD_S_INSTR_NONE, /**< no subtype set */ |
| OCSD_S_INSTR_BR_LINK, /**< branch with link */ |
| OCSD_S_INSTR_V8_RET, /**< v8 ret instruction - subtype of BR_INDIRECT */ |
| OCSD_S_INSTR_V8_ERET, /**< v8 eret instruction - subtype of BR_INDIRECT */ |
| OCSD_S_INSTR_V7_IMPLIED_RET, /**< v7 instruction which could imply return e.g. MOV PC, LR; POP { ,pc} */ |
| } ocsd_instr_subtype; |
| |
| /** Instruction decode request structure. |
| * |
| * Used in IInstrDecode interface. |
| * |
| * Caller fills in the input: information, callee then fills in the decoder: information. |
| */ |
| typedef struct _ocsd_instr_info { |
| /* input information */ |
| ocsd_arch_profile_t pe_type; /**< input: Core Arch and profile */ |
| ocsd_isa isa; /**< Input: Current ISA. */ |
| ocsd_vaddr_t instr_addr; /**< Input: Instruction address. */ |
| uint32_t opcode; /**< Input: Opcode at address. 16 bit opcodes will use MS 16bits of parameter. */ |
| uint8_t dsb_dmb_waypoints; /**< Input: DMB and DSB are waypoints */ |
| |
| /* instruction decode info */ |
| ocsd_instr_type type; /**< Decoder: Current instruction type. */ |
| ocsd_vaddr_t branch_addr; /**< Decoder: Calculated address of branch instrcution (direct branches only) */ |
| ocsd_isa next_isa; /**< Decoder: ISA for next intruction. */ |
| uint8_t instr_size; /**< Decoder : size of the decoded instruction */ |
| uint8_t is_conditional; /**< Decoder : set to 1 if this instruction is conditional */ |
| uint8_t is_link; /**< Decoder : is a branch with link instruction */ |
| uint8_t thumb_it_conditions; /**< Decoder : return number of following instructions set with conditions by this Thumb IT instruction */ |
| ocsd_instr_subtype sub_type; /**< Decoder : current instruction sub-type if known */ |
| } ocsd_instr_info; |
| |
| |
| /** Core(PE) context structure |
| records current security state, exception level, VMID and ContextID for core. |
| */ |
| typedef struct _ocsd_pe_context { |
| ocsd_sec_level security_level; /**< security state */ |
| ocsd_ex_level exception_level; /**< exception level */ |
| uint32_t context_id; /**< context ID */ |
| uint32_t vmid; /**< VMID */ |
| struct { |
| uint32_t bits64:1; /**< 1 if 64 bit operation */ |
| uint32_t ctxt_id_valid:1; /**< 1 if context ID value valid */ |
| uint32_t vmid_valid:1; /**< 1 if VMID value is valid */ |
| uint32_t el_valid:1; /**< 1 if EL value is valid (ETMv4 traces EL, other protocols do not) */ |
| }; |
| } ocsd_pe_context; |
| |
| |
| /** @}*/ |
| |
| /** @name Opcode Memory Access |
| Types used when accessing memory storage for traced opcodes.. |
| @{*/ |
| |
| /** memory space bitfield enum for available security states and exception levels used |
| when accessing memory. */ |
| typedef enum _ocsd_mem_space_acc_t { |
| OCSD_MEM_SPACE_EL1S = 0x1, /**< S EL1/0 */ |
| OCSD_MEM_SPACE_EL1N = 0x2, /**< NS EL1/0 */ |
| OCSD_MEM_SPACE_EL2 = 0x4, /**< NS EL2 */ |
| OCSD_MEM_SPACE_EL3 = 0x8, /**< S EL3 */ |
| OCSD_MEM_SPACE_S = 0x9, /**< Any S */ |
| OCSD_MEM_SPACE_N = 0x6, /**< Any NS */ |
| OCSD_MEM_SPACE_ANY = 0xF, /**< Any sec level / EL - live system use current EL + sec state */ |
| } ocsd_mem_space_acc_t; |
| |
| /** |
| * Callback function definition for callback function memory accessor type. |
| * |
| * When using callback memory accessor, the decoder will call this function to obtain the |
| * memory at the address for the current opcodes. The memory space will represent the current |
| * exception level and security context of the traced code. |
| * |
| * Return the number of bytes read, which can be less than the amount requested if this would take the |
| * access address outside the range of addresses defined when this callback was registered with the decoder. |
| * |
| * Return 0 bytes if start address out of covered range, or memory space is not one of those defined as supported |
| * when the callback was registered. |
| * |
| * @param p_context : opaque context pointer set by callback client. |
| * @param address : start address of memory to be accessed |
| * @param mem_space : memory space of accessed memory (current EL & security state) |
| * @param reqBytes : number of bytes required |
| * @param *byteBuffer : buffer for data. |
| * |
| * @return uint32_t : Number of bytes actually read, or 0 for access error. |
| */ |
| typedef uint32_t (* Fn_MemAcc_CB)(const void *p_context, const ocsd_vaddr_t address, const ocsd_mem_space_acc_t mem_space, const uint32_t reqBytes, uint8_t *byteBuffer); |
| |
| |
| /** memory region type for adding multi-region binary files to memory access interface */ |
| typedef struct _ocsd_file_mem_region { |
| size_t file_offset; /**< Offset from start of file for memory region */ |
| ocsd_vaddr_t start_address; /**< Start address of memory region */ |
| size_t region_size; /**< size in bytes of memory region */ |
| } ocsd_file_mem_region_t; |
| |
| /** @}*/ |
| |
| /** @name Packet Processor Operation Control Flags |
| common operational flags - bottom 16 bits, |
| component specific - top 16 bits. |
| @{*/ |
| |
| #define OCSD_OPFLG_PKTPROC_NOFWD_BAD_PKTS 0x00000001 /**< don't forward bad packets up data path */ |
| #define OCSD_OPFLG_PKTPROC_NOMON_BAD_PKTS 0x00000002 /**< don't forward bad packets to monitor interface */ |
| #define OCSD_OPFLG_PKTPROC_ERR_BAD_PKTS 0x00000004 /**< throw error for bad packets - halt decoding. */ |
| #define OCSD_OPFLG_PKTPROC_UNSYNC_ON_BAD_PKTS 0x00000008 /**< switch to unsynced state on bad packets - wait for next sync point */ |
| |
| /** mask to combine all common packet processor operational control flags */ |
| #define OCSD_OPFLG_PKTPROC_COMMON (OCSD_OPFLG_PKTPROC_NOFWD_BAD_PKTS | \ |
| OCSD_OPFLG_PKTPROC_NOMON_BAD_PKTS | \ |
| OCSD_OPFLG_PKTPROC_ERR_BAD_PKTS | \ |
| OCSD_OPFLG_PKTPROC_UNSYNC_ON_BAD_PKTS ) |
| |
| /** @}*/ |
| |
| /** @name Packet Decoder Operation Control Flags |
| common operational flags - bottom 16 bits, |
| component specific - top 16 bits. |
| @{*/ |
| |
| #define OCSD_OPFLG_PKTDEC_ERROR_BAD_PKTS 0x00000001 /**< throw error on bad packets input (default is to unsync and wait) */ |
| |
| /** mask to combine all common packet processor operational control flags */ |
| #define OCSD_OPFLG_PKTDEC_COMMON (OCSD_OPFLG_PKTDEC_ERROR_BAD_PKTS) |
| |
| /** @}*/ |
| |
| /** @name Decoder creation information |
| |
| Flags to use when creating decoders by name |
| |
| Builtin decoder names. |
| |
| Protocol type enum. |
| @{*/ |
| |
| #define OCSD_CREATE_FLG_PACKET_PROC 0x01 /**< Create packet processor only. */ |
| #define OCSD_CREATE_FLG_FULL_DECODER 0x02 /**< Create packet processor + decoder pair */ |
| #define OCSD_CREATE_FLG_INST_ID 0x04 /**< Use instance ID in decoder instance name */ |
| |
| #define OCSD_BUILTIN_DCD_STM "STM" /**< STM decoder */ |
| #define OCSD_BUILTIN_DCD_ETMV3 "ETMV3" /**< ETMv3 decoder */ |
| #define OCSD_BUILTIN_DCD_ETMV4I "ETMV4I" /**< ETMv4 instruction decoder */ |
| #define OCSD_BUILTIN_DCD_ETMV4D "ETMV4D" /**< ETMv4 data decoder */ |
| #define OCSD_BUILTIN_DCD_PTM "PTM" /**< PTM decoder */ |
| |
| /*! Trace Protocol Builtin Types + extern |
| */ |
| typedef enum _ocsd_trace_protocol_t { |
| OCSD_PROTOCOL_UNKNOWN = 0, /**< Protocol unknown */ |
| |
| /* Built in library decoders */ |
| OCSD_PROTOCOL_ETMV3, /**< ETMV3 instruction and data trace protocol decoder. */ |
| OCSD_PROTOCOL_ETMV4I, /**< ETMV4 instruction trace protocol decoder. */ |
| OCSD_PROTOCOL_ETMV4D, /**< ETMV4 data trace protocol decoder. */ |
| OCSD_PROTOCOL_PTM, /**< PTM program flow instruction trace protocol decoder. */ |
| OCSD_PROTOCOL_STM, /**< STM system trace protocol decoder. */ |
| |
| /* others to be added here */ |
| OCSD_PROTOCOL_BUILTIN_END, /**< Invalid protocol - built-in protocol types end marker */ |
| |
| /* Custom / external decoders */ |
| OCSD_PROTOCOL_CUSTOM_0 = 100, /**< Values from this onwards are assigned to external registered decoders */ |
| OCSD_PROTOCOL_CUSTOM_1, |
| OCSD_PROTOCOL_CUSTOM_2, |
| OCSD_PROTOCOL_CUSTOM_3, |
| OCSD_PROTOCOL_CUSTOM_4, |
| OCSD_PROTOCOL_CUSTOM_5, |
| OCSD_PROTOCOL_CUSTOM_6, |
| OCSD_PROTOCOL_CUSTOM_7, |
| OCSD_PROTOCOL_CUSTOM_8, |
| OCSD_PROTOCOL_CUSTOM_9, |
| |
| OCSD_PROTOCOL_END /**< Invalid protocol - protocol types end marker */ |
| } ocsd_trace_protocol_t; |
| |
| /** Test if protocol type is a library built-in decoder */ |
| #define OCSD_PROTOCOL_IS_BUILTIN(P) ((P > OCSD_PROTOCOL_UNKNOWN) && (P < OCSD_PROTOCOL_BUILTIN_END)) |
| |
| /** Test if protocol type is a custom external registered decoder */ |
| #define OCSD_PROTOCOL_IS_CUSTOM(P) ((P >= OCSD_PROTOCOL_CUSTOM_0) && (P < OCSD_PROTOCOL_END )) |
| |
| /** @}*/ |
| |
| |
| /** @name Software Trace Packets Info |
| |
| Contains the information for the generic software trace output packet. |
| |
| Software trace packet master and channel data. |
| Payload info: |
| size - packet payload size in bits; |
| marker - if this packet has a marker/flag |
| timestamp - if this packet has a timestamp associated |
| number of packets - packet processor can optionally correlate identically |
| sized packets on the same master / channel to be output as a single generic packet |
| |
| Payload output as separate LE buffer, of sufficient bytes to hold all the packets. |
| @{*/ |
| |
| typedef struct _ocsd_swt_info { |
| uint16_t swt_master_id; |
| uint16_t swt_channel_id; |
| union { |
| struct { |
| uint32_t swt_payload_pkt_bitsize:8; /**< [bits 0:7 ] Packet size in bits of the payload packets */ |
| uint32_t swt_payload_num_packets:8; /**< [bits 8:15 ] number of consecutive packets of this type in the payload data */ |
| uint32_t swt_marker_packet:1; /**< [bit 16 ] packet is marker / flag packet */ |
| uint32_t swt_has_timestamp:1; /**< [bit 17 ] packet has timestamp. */ |
| uint32_t swt_marker_first:1; /**< [bit 18 ] for multiple packet payloads, this indicates if any marker is on first or last packet */ |
| uint32_t swt_master_err:1; /**< [bit 19 ] current master has error - payload is error code */ |
| uint32_t swt_global_err:1; /**< [bit 20 ] global error - payload is error code - master and channel ID not valid */ |
| uint32_t swt_trigger_event:1; /**< [bit 21 ] trigger event packet - payload is event number */ |
| uint32_t swt_frequency:1; /**< [bit 22 ] frequency packet - payload is frequency */ |
| uint32_t swt_id_valid:1; /**< [bit 23 ] master & channel ID has been set by input stream */ |
| }; |
| uint32_t swt_flag_bits; |
| }; |
| } ocsd_swt_info_t; |
| |
| /** mask for the swt_id_valid flag - need to retain between packets */ |
| #define SWT_ID_VALID_MASK (0x1 << 23) |
| |
| /** @}*/ |
| |
| /** @}*/ |
| #endif // ARM_OCSD_IF_TYPES_H_INCLUDED |
| |
| /* End of File opencsd/ocsd_if_types.h */ |