| /* |
| * Texas Instruments System Control Interface API |
| * Based on Linux and U-Boot implementation |
| * |
| * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef TI_SCI_H |
| #define TI_SCI_H |
| |
| #include <stdint.h> |
| #include <stdbool.h> |
| |
| /** |
| * Device control operations |
| * |
| * - ti_sci_device_get - command to request for device managed by TISCI |
| * - ti_sci_device_get_exclusive - exclusively request a device |
| * - ti_sci_device_idle - Command to idle a device managed by TISCI |
| * - ti_sci_device_idle_exclusive - exclusively idle a device |
| * - ti_sci_device_put - command to release a device managed by TISCI |
| * - ti_sci_device_put_no_wait - release a device without waiting for response |
| * - ti_sci_device_is_valid - Is the device valid |
| * - ti_sci_device_get_clcnt - Get context loss counter |
| * @count: Pointer to Context Loss counter to populate |
| * - ti_sci_device_is_idle - Check if the device is requested to be idle |
| * @r_state: true if requested to be idle |
| * - ti_sci_device_is_stop - Check if the device is requested to be stopped |
| * @r_state: true if requested to be stopped |
| * @curr_state: true if currently stopped. |
| * - ti_sci_device_is_on - Check if the device is requested to be ON |
| * @r_state: true if requested to be ON |
| * @curr_state: true if currently ON and active |
| * - ti_sci_device_is_trans - Check if the device is currently transitioning |
| * @curr_state: true if currently transitioning. |
| * - ti_sci_device_set_resets - Command to set resets for |
| * device managed by TISCI |
| * @reset_state: Device specific reset bit field |
| * - ti_sci_device_get_resets - Get reset state for device managed by TISCI |
| * @reset_state: Pointer to reset state to populate |
| * |
| * NOTE: for all these functions, the following are generic in nature: |
| * @id: Device Identifier |
| * Returns 0 for successful request, else returns corresponding error message. |
| * |
| * Request for the device - NOTE: the client MUST maintain integrity of |
| * usage count by balancing get_device with put_device. No refcounting is |
| * managed by driver for that purpose. |
| */ |
| int ti_sci_device_get(uint32_t id); |
| int ti_sci_device_get_exclusive(uint32_t id); |
| int ti_sci_device_idle(uint32_t id); |
| int ti_sci_device_idle_exclusive(uint32_t id); |
| int ti_sci_device_put(uint32_t id); |
| int ti_sci_device_put_no_wait(uint32_t id); |
| int ti_sci_device_is_valid(uint32_t id); |
| int ti_sci_device_get_clcnt(uint32_t id, uint32_t *count); |
| int ti_sci_device_is_idle(uint32_t id, bool *r_state); |
| int ti_sci_device_is_stop(uint32_t id, bool *r_state, bool *curr_state); |
| int ti_sci_device_is_on(uint32_t id, bool *r_state, bool *curr_state); |
| int ti_sci_device_is_trans(uint32_t id, bool *curr_state); |
| int ti_sci_device_set_resets(uint32_t id, uint32_t reset_state); |
| int ti_sci_device_get_resets(uint32_t id, uint32_t *reset_state); |
| |
| /** |
| * Clock control operations |
| * |
| * - ti_sci_clock_get - Get control of a clock from TI SCI |
| * @needs_ssc: 'true' iff Spread Spectrum clock is desired |
| * @can_change_freq: 'true' iff frequency change is desired |
| * @enable_input_term: 'true' iff input termination is desired |
| * - ti_sci_clock_idle - Idle a clock which is in our control |
| * - ti_sci_clock_put - Release a clock from our control |
| * - ti_sci_clock_is_auto - Is the clock being auto managed |
| * @req_state: state indicating if the clock is auto managed |
| * - ti_sci_clock_is_on - Is the clock ON |
| * @req_state: state indicating if the clock is managed by us and enabled |
| * @curr_state: state indicating if the clock is ready for operation |
| * - ti_sci_clock_is_off - Is the clock OFF |
| * @req_state: state indicating if the clock is managed by us and disabled |
| * @curr_state: state indicating if the clock is NOT ready for operation |
| * - ti_sci_clock_set_parent - Set the clock source of a specific device clock |
| * @parent_id: Parent clock identifier to set |
| * - ti_sci_clock_get_parent - Get current parent clock source |
| * @parent_id: Current clock parent |
| * - ti_sci_clock_get_num_parents - Get num parents of the current clk source |
| * @num_parents: Returns he number of parents to the current clock. |
| * - ti_sci_clock_get_match_freq - Find a good match for frequency |
| * @match_freq: Frequency match in Hz response. |
| * - ti_sci_clock_set_freq - Set a frequency for clock |
| * - ti_sci_clock_get_freq - Get current frequency |
| * @freq: Currently frequency in Hz |
| * |
| * NOTE: for all these functions, the following are generic in nature: |
| * @dev_id: Device identifier this request is for |
| * @clk_id: Clock identifier for the device for this request. |
| * Each device has its own set of clock inputs. This indexes |
| * which clock input to modify. |
| * @min_freq: The minimum allowable frequency in Hz. This is the minimum |
| * allowable programmed frequency and does not account for clock |
| * tolerances and jitter. |
| * @target_freq: The target clock frequency in Hz. A frequency will be |
| * processed as close to this target frequency as possible. |
| * @max_freq: The maximum allowable frequency in Hz. This is the maximum |
| * allowable programmed frequency and does not account for clock |
| * tolerances and jitter. |
| * Returns 0 for successful request, else returns corresponding error message. |
| * |
| * Request for the clock - NOTE: the client MUST maintain integrity of |
| * usage count by balancing get_clock with put_clock. No refcounting is |
| * managed by driver for that purpose. |
| */ |
| int ti_sci_clock_get(uint32_t dev_id, uint8_t clk_id, |
| bool needs_ssc, bool can_change_freq, |
| bool enable_input_term); |
| int ti_sci_clock_idle(uint32_t dev_id, uint8_t clk_id); |
| int ti_sci_clock_put(uint32_t dev_id, uint8_t clk_id); |
| int ti_sci_clock_is_auto(uint32_t dev_id, uint8_t clk_id, |
| bool *req_state); |
| int ti_sci_clock_is_on(uint32_t dev_id, uint8_t clk_id, |
| bool *req_state, bool *curr_state); |
| int ti_sci_clock_is_off(uint32_t dev_id, uint8_t clk_id, |
| bool *req_state, bool *curr_state); |
| int ti_sci_clock_set_parent(uint32_t dev_id, uint8_t clk_id, |
| uint8_t parent_id); |
| int ti_sci_clock_get_parent(uint32_t dev_id, uint8_t clk_id, |
| uint8_t *parent_id); |
| int ti_sci_clock_get_num_parents(uint32_t dev_id, uint8_t clk_id, |
| uint8_t *num_parents); |
| int ti_sci_clock_get_match_freq(uint32_t dev_id, uint8_t clk_id, |
| uint64_t min_freq, uint64_t target_freq, |
| uint64_t max_freq, uint64_t *match_freq); |
| int ti_sci_clock_set_freq(uint32_t dev_id, uint8_t clk_id, |
| uint64_t min_freq, uint64_t target_freq, |
| uint64_t max_freq); |
| int ti_sci_clock_get_freq(uint32_t dev_id, uint8_t clk_id, uint64_t *freq); |
| |
| /** |
| * Core control operations |
| * |
| * - ti_sci_core_reboot() - Command to request system reset |
| * |
| * Return: 0 if all went well, else returns appropriate error value. |
| */ |
| int ti_sci_core_reboot(void); |
| |
| /** |
| * Processor control operations |
| * |
| * - ti_sci_proc_request - Command to request a physical processor control |
| * - ti_sci_proc_release - Command to release a physical processor control |
| * - ti_sci_proc_handover - Command to handover a physical processor control to |
| * a host in the processor's access control list. |
| * @host_id: Host ID to get the control of the processor |
| * - ti_sci_proc_set_boot_cfg - Command to set the processor boot configuration flags |
| * @config_flags_set: Configuration flags to be set |
| * @config_flags_clear: Configuration flags to be cleared. |
| * - ti_sci_proc_set_boot_ctrl - Command to set the processor boot control flags |
| * @control_flags_set: Control flags to be set |
| * @control_flags_clear: Control flags to be cleared |
| * - ti_sci_proc_set_boot_ctrl_no_wait - Same as above without waiting for response |
| * - ti_sci_proc_auth_boot_image - Command to authenticate and load the image |
| * and then set the processor configuration flags. |
| * @cert_addr: Memory address at which payload image certificate is located. |
| * - ti_sci_proc_get_boot_status - Command to get the processor boot status |
| * - ti_sci_proc_wait_boot_status - Command to wait for a processor boot status |
| * - ti_sci_proc_wait_boot_status_no_wait - Same as above without waiting for response |
| * |
| * NOTE: for all these functions, the following are generic in nature: |
| * @proc_id: Processor ID |
| * Returns 0 for successful request, else returns corresponding error message. |
| */ |
| int ti_sci_proc_request(uint8_t proc_id); |
| int ti_sci_proc_release(uint8_t proc_id); |
| int ti_sci_proc_handover(uint8_t proc_id, uint8_t host_id); |
| int ti_sci_proc_set_boot_cfg(uint8_t proc_id, uint64_t bootvector, |
| uint32_t config_flags_set, |
| uint32_t config_flags_clear); |
| int ti_sci_proc_set_boot_ctrl(uint8_t proc_id, uint32_t control_flags_set, |
| uint32_t control_flags_clear); |
| int ti_sci_proc_set_boot_ctrl_no_wait(uint8_t proc_id, |
| uint32_t control_flags_set, |
| uint32_t control_flags_clear); |
| int ti_sci_proc_auth_boot_image(uint8_t proc_id, uint64_t cert_addr); |
| int ti_sci_proc_get_boot_status(uint8_t proc_id, uint64_t *bv, |
| uint32_t *cfg_flags, |
| uint32_t *ctrl_flags, |
| uint32_t *sts_flags); |
| int ti_sci_proc_wait_boot_status(uint8_t proc_id, uint8_t num_wait_iterations, |
| uint8_t num_match_iterations, |
| uint8_t delay_per_iteration_us, |
| uint8_t delay_before_iterations_us, |
| uint32_t status_flags_1_set_all_wait, |
| uint32_t status_flags_1_set_any_wait, |
| uint32_t status_flags_1_clr_all_wait, |
| uint32_t status_flags_1_clr_any_wait); |
| int ti_sci_proc_wait_boot_status_no_wait(uint8_t proc_id, |
| uint8_t num_wait_iterations, |
| uint8_t num_match_iterations, |
| uint8_t delay_per_iteration_us, |
| uint8_t delay_before_iterations_us, |
| uint32_t status_flags_1_set_all_wait, |
| uint32_t status_flags_1_set_any_wait, |
| uint32_t status_flags_1_clr_all_wait, |
| uint32_t status_flags_1_clr_any_wait); |
| |
| /** |
| * ti_sci_init() - Basic initialization |
| * |
| * Return: 0 if all goes good, else appropriate error message. |
| */ |
| int ti_sci_init(void); |
| |
| #endif /* TI_SCI_H */ |