blob: 9c5af88bb48146fc4da921021d336a2748fd11c4 [file] [log] [blame]
/*
* Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* ZynqMP system level PM-API functions for ioctl.
*/
#include <arch_helpers.h>
#include <drivers/delay_timer.h>
#include <lib/mmio.h>
#include <plat/common/platform.h>
#include <zynqmp_def.h>
#include "pm_api_clock.h"
#include "pm_api_ioctl.h"
#include "pm_api_sys.h"
#include "pm_client.h"
#include "pm_common.h"
#include "pm_ipi.h"
/**
* pm_ioctl_get_rpu_oper_mode () - Get current RPU operation mode
* @mode Buffer to store value of oper mode(Split/Lock-step)
*
* This function provides current configured RPU operational mode.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_get_rpu_oper_mode(unsigned int *mode)
{
unsigned int val;
val = mmio_read_32(ZYNQMP_RPU_GLBL_CNTL);
val &= ZYNQMP_SLSPLIT_MASK;
if (val == 0)
*mode = PM_RPU_MODE_LOCKSTEP;
else
*mode = PM_RPU_MODE_SPLIT;
return PM_RET_SUCCESS;
}
/**
* pm_ioctl_set_rpu_oper_mode () - Configure RPU operation mode
* @mode Value to set for oper mode(Split/Lock-step)
*
* This function configures RPU operational mode(Split/Lock-step).
* It also sets TCM combined mode in RPU lock-step and TCM non-combined
* mode for RPU split mode. In case of Lock step mode, RPU1's output is
* clamped.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_set_rpu_oper_mode(unsigned int mode)
{
unsigned int val;
if (mmio_read_32(CRL_APB_RST_LPD_TOP) & CRL_APB_RPU_AMBA_RESET)
return PM_RET_ERROR_ACCESS;
val = mmio_read_32(ZYNQMP_RPU_GLBL_CNTL);
if (mode == PM_RPU_MODE_SPLIT) {
val |= ZYNQMP_SLSPLIT_MASK;
val &= ~ZYNQMP_TCM_COMB_MASK;
val &= ~ZYNQMP_SLCLAMP_MASK;
} else if (mode == PM_RPU_MODE_LOCKSTEP) {
val &= ~ZYNQMP_SLSPLIT_MASK;
val |= ZYNQMP_TCM_COMB_MASK;
val |= ZYNQMP_SLCLAMP_MASK;
} else {
return PM_RET_ERROR_ARGS;
}
mmio_write_32(ZYNQMP_RPU_GLBL_CNTL, val);
return PM_RET_SUCCESS;
}
/**
* pm_ioctl_config_boot_addr() - Configure RPU boot address
* @nid Node ID of RPU
* @value Value to set for boot address (TCM/OCM)
*
* This function configures RPU boot address(memory).
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_config_boot_addr(enum pm_node_id nid,
unsigned int value)
{
unsigned int rpu_cfg_addr, val;
if (nid == NODE_RPU_0)
rpu_cfg_addr = ZYNQMP_RPU0_CFG;
else if (nid == NODE_RPU_1)
rpu_cfg_addr = ZYNQMP_RPU1_CFG;
else
return PM_RET_ERROR_ARGS;
val = mmio_read_32(rpu_cfg_addr);
if (value == PM_RPU_BOOTMEM_LOVEC)
val &= ~ZYNQMP_VINITHI_MASK;
else if (value == PM_RPU_BOOTMEM_HIVEC)
val |= ZYNQMP_VINITHI_MASK;
else
return PM_RET_ERROR_ARGS;
mmio_write_32(rpu_cfg_addr, val);
return PM_RET_SUCCESS;
}
/**
* pm_ioctl_config_tcm_comb() - Configure TCM combined mode
* @value Value to set (Split/Combined)
*
* This function configures TCM to be in split mode or combined
* mode.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_config_tcm_comb(unsigned int value)
{
unsigned int val;
val = mmio_read_32(ZYNQMP_RPU_GLBL_CNTL);
if (value == PM_RPU_TCM_SPLIT)
val &= ~ZYNQMP_TCM_COMB_MASK;
else if (value == PM_RPU_TCM_COMB)
val |= ZYNQMP_TCM_COMB_MASK;
else
return PM_RET_ERROR_ARGS;
mmio_write_32(ZYNQMP_RPU_GLBL_CNTL, val);
return PM_RET_SUCCESS;
}
/**
* pm_ioctl_set_tapdelay_bypass() - Enable/Disable tap delay bypass
* @type Type of tap delay to enable/disable (e.g. QSPI)
* @value Enable/Disable
*
* This function enable/disable tap delay bypass.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_set_tapdelay_bypass(unsigned int type,
unsigned int value)
{
if ((value != PM_TAPDELAY_BYPASS_ENABLE &&
value != PM_TAPDELAY_BYPASS_DISABLE) || type >= PM_TAPDELAY_MAX)
return PM_RET_ERROR_ARGS;
return pm_mmio_write(IOU_TAPDLY_BYPASS, TAP_DELAY_MASK, value << type);
}
/**
* pm_ioctl_set_sgmii_mode() - Set SGMII mode for the GEM device
* @nid Node ID of the device
* @value Enable/Disable
*
* This function enable/disable SGMII mode for the GEM device.
* While enabling SGMII mode, it also ties the GEM PCS Signal
* Detect to 1 and selects EMIO for RX clock generation.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_set_sgmii_mode(enum pm_node_id nid,
unsigned int value)
{
unsigned int val, mask, shift;
enum pm_ret_status ret;
if (value != PM_SGMII_DISABLE && value != PM_SGMII_ENABLE)
return PM_RET_ERROR_ARGS;
switch (nid) {
case NODE_ETH_0:
shift = 0;
break;
case NODE_ETH_1:
shift = 1;
break;
case NODE_ETH_2:
shift = 2;
break;
case NODE_ETH_3:
shift = 3;
break;
default:
return PM_RET_ERROR_ARGS;
}
if (value == PM_SGMII_DISABLE) {
mask = GEM_SGMII_MASK << GEM_CLK_CTRL_OFFSET * shift;
ret = pm_mmio_write(IOU_GEM_CLK_CTRL, mask, 0U);
} else {
/* Tie the GEM PCS Signal Detect to 1 */
mask = SGMII_SD_MASK << SGMII_SD_OFFSET * shift;
val = SGMII_PCS_SD_1 << SGMII_SD_OFFSET * shift;
ret = pm_mmio_write(IOU_GEM_CTRL, mask, val);
if (ret != PM_RET_SUCCESS)
return ret;
/* Set the GEM to SGMII mode */
mask = GEM_CLK_CTRL_MASK << GEM_CLK_CTRL_OFFSET * shift;
val = GEM_RX_SRC_SEL_GTR | GEM_SGMII_MODE;
val <<= GEM_CLK_CTRL_OFFSET * shift;
ret = pm_mmio_write(IOU_GEM_CLK_CTRL, mask, val);
}
return ret;
}
/**
* pm_ioctl_sd_dll_reset() - Reset DLL logic
* @nid Node ID of the device
* @type Reset type
*
* This function resets DLL logic for the SD device.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_sd_dll_reset(enum pm_node_id nid,
unsigned int type)
{
unsigned int mask, val;
enum pm_ret_status ret;
if (nid == NODE_SD_0) {
mask = ZYNQMP_SD0_DLL_RST_MASK;
val = ZYNQMP_SD0_DLL_RST;
} else if (nid == NODE_SD_1) {
mask = ZYNQMP_SD1_DLL_RST_MASK;
val = ZYNQMP_SD1_DLL_RST;
} else {
return PM_RET_ERROR_ARGS;
}
switch (type) {
case PM_DLL_RESET_ASSERT:
case PM_DLL_RESET_PULSE:
ret = pm_mmio_write(ZYNQMP_SD_DLL_CTRL, mask, val);
if (ret != PM_RET_SUCCESS)
return ret;
if (type == PM_DLL_RESET_ASSERT)
break;
mdelay(1);
/* Fallthrough */
case PM_DLL_RESET_RELEASE:
ret = pm_mmio_write(ZYNQMP_SD_DLL_CTRL, mask, 0);
break;
default:
ret = PM_RET_ERROR_ARGS;
break;
}
return ret;
}
/**
* pm_ioctl_sd_set_tapdelay() - Set tap delay for the SD device
* @nid Node ID of the device
* @type Type of tap delay to set (input/output)
* @value Value to set fot the tap delay
*
* This function sets input/output tap delay for the SD device.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_sd_set_tapdelay(enum pm_node_id nid,
enum tap_delay_type type,
unsigned int value)
{
unsigned int shift;
enum pm_ret_status ret;
unsigned int val, mask;
if (nid == NODE_SD_0) {
shift = 0;
mask = ZYNQMP_SD0_DLL_RST_MASK;
} else if (nid == NODE_SD_1) {
shift = ZYNQMP_SD_TAP_OFFSET;
mask = ZYNQMP_SD1_DLL_RST_MASK;
} else {
return PM_RET_ERROR_ARGS;
}
ret = pm_mmio_read(ZYNQMP_SD_DLL_CTRL, &val);
if (ret != PM_RET_SUCCESS) {
return ret;
}
if ((val & mask) == 0) {
ret = pm_ioctl_sd_dll_reset(nid, PM_DLL_RESET_ASSERT);
if (ret != PM_RET_SUCCESS) {
return ret;
}
}
if (type == PM_TAPDELAY_INPUT) {
ret = pm_mmio_write(ZYNQMP_SD_ITAP_DLY,
(ZYNQMP_SD_ITAPCHGWIN_MASK << shift),
(ZYNQMP_SD_ITAPCHGWIN << shift));
if (ret != PM_RET_SUCCESS)
goto reset_release;
if (value == 0)
ret = pm_mmio_write(ZYNQMP_SD_ITAP_DLY,
(ZYNQMP_SD_ITAPDLYENA_MASK <<
shift), 0);
else
ret = pm_mmio_write(ZYNQMP_SD_ITAP_DLY,
(ZYNQMP_SD_ITAPDLYENA_MASK <<
shift), (ZYNQMP_SD_ITAPDLYENA <<
shift));
if (ret != PM_RET_SUCCESS)
goto reset_release;
ret = pm_mmio_write(ZYNQMP_SD_ITAP_DLY,
(ZYNQMP_SD_ITAPDLYSEL_MASK << shift),
(value << shift));
if (ret != PM_RET_SUCCESS)
goto reset_release;
ret = pm_mmio_write(ZYNQMP_SD_ITAP_DLY,
(ZYNQMP_SD_ITAPCHGWIN_MASK << shift), 0);
} else if (type == PM_TAPDELAY_OUTPUT) {
ret = pm_mmio_write(ZYNQMP_SD_OTAP_DLY,
(ZYNQMP_SD_OTAPDLYENA_MASK << shift), 0);
if (ret != PM_RET_SUCCESS)
goto reset_release;
ret = pm_mmio_write(ZYNQMP_SD_OTAP_DLY,
(ZYNQMP_SD_OTAPDLYSEL_MASK << shift),
(value << shift));
} else {
ret = PM_RET_ERROR_ARGS;
}
reset_release:
if ((val & mask) == 0) {
(void)pm_ioctl_sd_dll_reset(nid, PM_DLL_RESET_RELEASE);
}
return ret;
}
/**
* pm_ioctl_set_pll_frac_mode() - Ioctl function for
* setting pll mode
* @pll PLL clock id
* @mode Mode fraction/integar
*
* This function sets PLL mode
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_set_pll_frac_mode
(unsigned int pll, unsigned int mode)
{
return pm_clock_set_pll_mode(pll, mode);
}
/**
* pm_ioctl_get_pll_frac_mode() - Ioctl function for
* getting pll mode
* @pll PLL clock id
* @mode Mode fraction/integar
*
* This function return current PLL mode
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_get_pll_frac_mode
(unsigned int pll, unsigned int *mode)
{
return pm_clock_get_pll_mode(pll, mode);
}
/**
* pm_ioctl_set_pll_frac_data() - Ioctl function for
* setting pll fraction data
* @pll PLL clock id
* @data fraction data
*
* This function sets fraction data.
* It is valid for fraction mode only.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_set_pll_frac_data
(unsigned int pll, unsigned int data)
{
enum pm_node_id pll_nid;
enum pm_ret_status status;
/* Get PLL node ID using PLL clock ID */
status = pm_clock_get_pll_node_id(pll, &pll_nid);
if (status != PM_RET_SUCCESS)
return status;
return pm_pll_set_parameter(pll_nid, PM_PLL_PARAM_DATA, data);
}
/**
* pm_ioctl_get_pll_frac_data() - Ioctl function for
* getting pll fraction data
* @pll PLL clock id
* @data fraction data
*
* This function returns fraction data value.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_get_pll_frac_data
(unsigned int pll, unsigned int *data)
{
enum pm_node_id pll_nid;
enum pm_ret_status status;
/* Get PLL node ID using PLL clock ID */
status = pm_clock_get_pll_node_id(pll, &pll_nid);
if (status != PM_RET_SUCCESS)
return status;
return pm_pll_get_parameter(pll_nid, PM_PLL_PARAM_DATA, data);
}
/**
* pm_ioctl_write_ggs() - Ioctl function for writing
* global general storage (ggs)
* @index GGS register index
* @value Register value to be written
*
* This function writes value to GGS register.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_write_ggs(unsigned int index,
unsigned int value)
{
if (index >= GGS_NUM_REGS)
return PM_RET_ERROR_ARGS;
return pm_mmio_write(GGS_BASEADDR + (index << 2),
0xFFFFFFFFU, value);
}
/**
* pm_ioctl_read_ggs() - Ioctl function for reading
* global general storage (ggs)
* @index GGS register index
* @value Register value
*
* This function returns GGS register value.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_read_ggs(unsigned int index,
unsigned int *value)
{
if (index >= GGS_NUM_REGS)
return PM_RET_ERROR_ARGS;
return pm_mmio_read(GGS_BASEADDR + (index << 2), value);
}
/**
* pm_ioctl_write_pggs() - Ioctl function for writing persistent
* global general storage (pggs)
* @index PGGS register index
* @value Register value to be written
*
* This function writes value to PGGS register.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_write_pggs(unsigned int index,
unsigned int value)
{
if (index >= PGGS_NUM_REGS)
return PM_RET_ERROR_ARGS;
return pm_mmio_write(PGGS_BASEADDR + (index << 2),
0xFFFFFFFFU, value);
}
/**
* pm_ioctl_afi() - Ioctl function for writing afi values
*
* @index AFI register index
* @value Register value to be written
*
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_afi(unsigned int index,
unsigned int value)
{
unsigned int mask;
unsigned int regarr[] = {0xFD360000,
0xFD360014,
0xFD370000,
0xFD370014,
0xFD380000,
0xFD380014,
0xFD390000,
0xFD390014,
0xFD3a0000,
0xFD3a0014,
0xFD3b0000,
0xFD3b0014,
0xFF9b0000,
0xFF9b0014,
0xFD615000,
0xFF419000,
};
if (index >= ARRAY_SIZE(regarr))
return PM_RET_ERROR_ARGS;
if (index < AFIFM6_WRCTRL)
mask = FABRIC_WIDTH;
else
mask = 0xf00;
return pm_mmio_write(regarr[index], mask, value);
}
/**
* pm_ioctl_read_pggs() - Ioctl function for reading persistent
* global general storage (pggs)
* @index PGGS register index
* @value Register value
*
* This function returns PGGS register value.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_read_pggs(unsigned int index,
unsigned int *value)
{
if (index >= PGGS_NUM_REGS)
return PM_RET_ERROR_ARGS;
return pm_mmio_read(PGGS_BASEADDR + (index << 2), value);
}
/**
* pm_ioctl_ulpi_reset() - Ioctl function for performing ULPI reset
*
* This function peerforms the ULPI reset sequence for resetting
* the ULPI transceiver.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_ulpi_reset(void)
{
enum pm_ret_status ret;
ret = pm_mmio_write(CRL_APB_BOOT_PIN_CTRL, CRL_APB_BOOT_PIN_MASK,
ZYNQMP_ULPI_RESET_VAL_HIGH);
if (ret != PM_RET_SUCCESS)
return ret;
/* Drive ULPI assert for atleast 1ms */
mdelay(1);
ret = pm_mmio_write(CRL_APB_BOOT_PIN_CTRL, CRL_APB_BOOT_PIN_MASK,
ZYNQMP_ULPI_RESET_VAL_LOW);
if (ret != PM_RET_SUCCESS)
return ret;
/* Drive ULPI de-assert for atleast 1ms */
mdelay(1);
ret = pm_mmio_write(CRL_APB_BOOT_PIN_CTRL, CRL_APB_BOOT_PIN_MASK,
ZYNQMP_ULPI_RESET_VAL_HIGH);
return ret;
}
/**
* pm_ioctl_set_boot_health_status() - Ioctl for setting healthy boot status
*
* This function sets healthy bit value to indicate boot health status
* to firmware.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_set_boot_health_status(unsigned int value)
{
return pm_mmio_write(PMU_GLOBAL_GEN_STORAGE4,
PM_BOOT_HEALTH_STATUS_MASK, value);
}
/**
* pm_api_ioctl() - PM IOCTL API for device control and configs
* @node_id Node ID of the device
* @ioctl_id ID of the requested IOCTL
* @arg1 Argument 1 to requested IOCTL call
* @arg2 Argument 2 to requested IOCTL call
* @value Returned output value
*
* This function calls IOCTL to firmware for device control and configuration.
*
* @return Returns status, either success or error+reason
*/
enum pm_ret_status pm_api_ioctl(enum pm_node_id nid,
unsigned int ioctl_id,
unsigned int arg1,
unsigned int arg2,
unsigned int *value)
{
enum pm_ret_status ret;
switch (ioctl_id) {
case IOCTL_GET_RPU_OPER_MODE:
ret = pm_ioctl_get_rpu_oper_mode(value);
break;
case IOCTL_SET_RPU_OPER_MODE:
ret = pm_ioctl_set_rpu_oper_mode(arg1);
break;
case IOCTL_RPU_BOOT_ADDR_CONFIG:
ret = pm_ioctl_config_boot_addr(nid, arg1);
break;
case IOCTL_TCM_COMB_CONFIG:
ret = pm_ioctl_config_tcm_comb(arg1);
break;
case IOCTL_SET_TAPDELAY_BYPASS:
ret = pm_ioctl_set_tapdelay_bypass(arg1, arg2);
break;
case IOCTL_SET_SGMII_MODE:
ret = pm_ioctl_set_sgmii_mode(nid, arg1);
break;
case IOCTL_SD_DLL_RESET:
ret = pm_ioctl_sd_dll_reset(nid, arg1);
break;
case IOCTL_SET_SD_TAPDELAY:
ret = pm_ioctl_sd_set_tapdelay(nid, arg1, arg2);
break;
case IOCTL_SET_PLL_FRAC_MODE:
ret = pm_ioctl_set_pll_frac_mode(arg1, arg2);
break;
case IOCTL_GET_PLL_FRAC_MODE:
ret = pm_ioctl_get_pll_frac_mode(arg1, value);
break;
case IOCTL_SET_PLL_FRAC_DATA:
ret = pm_ioctl_set_pll_frac_data(arg1, arg2);
break;
case IOCTL_GET_PLL_FRAC_DATA:
ret = pm_ioctl_get_pll_frac_data(arg1, value);
break;
case IOCTL_WRITE_GGS:
ret = pm_ioctl_write_ggs(arg1, arg2);
break;
case IOCTL_READ_GGS:
ret = pm_ioctl_read_ggs(arg1, value);
break;
case IOCTL_WRITE_PGGS:
ret = pm_ioctl_write_pggs(arg1, arg2);
break;
case IOCTL_READ_PGGS:
ret = pm_ioctl_read_pggs(arg1, value);
break;
case IOCTL_ULPI_RESET:
ret = pm_ioctl_ulpi_reset();
break;
case IOCTL_SET_BOOT_HEALTH_STATUS:
ret = pm_ioctl_set_boot_health_status(arg1);
break;
case IOCTL_AFI:
ret = pm_ioctl_afi(arg1, arg2);
break;
case IOCTL_SET_FEATURE_CONFIG:
case IOCTL_GET_FEATURE_CONFIG:
ret = pm_feature_config(ioctl_id, arg1, arg2, value);
break;
default:
ret = PM_RET_ERROR_NOTSUPPORTED;
break;
}
return ret;
}