blob: a4c6f8803c174cb2d876f0dcf6fc02e791820277 [file] [log] [blame]
Demonstrations of funclatency, the Linux eBPF/bcc version.
Timing the do_sys_open() kernel function until Ctrl-C:
# ./funclatency do_sys_open
Tracing do_sys_open... Hit Ctrl-C to end.
^C
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 124 |**************** |
4096 -> 8191 : 291 |**************************************|
8192 -> 16383 : 36 |**** |
16384 -> 32767 : 16 |** |
32768 -> 65535 : 8 |* |
65536 -> 131071 : 0 | |
131072 -> 262143 : 0 | |
262144 -> 524287 : 0 | |
524288 -> 1048575 : 0 | |
1048576 -> 2097151 : 0 | |
2097152 -> 4194303 : 1 | |
Detaching...
The output shows a histogram of function latency (call time), measured from when
the function began executing (was called) to when it finished (returned).
This example output shows that most of the time, do_sys_open() took between
2048 and 65536 nanoseconds (2 to 65 microseconds). The peak of this distribution
shows 291 calls of between 4096 and 8191 nanoseconds. There was also one
occurrence, an outlier, in the 2 to 4 millisecond range.
How this works: the function entry and return are traced using the kernel kprobe
and kretprobe tracer. Timestamps are collected, the delta time calculated, which
is the bucketized and stored as an in-kernel histogram for efficiency. The
histogram is visible in the output: it's the "count" column; everything else is
decoration. Only the count column is copied to user-level on output. This is an
efficient way to time kernel functions and examine their latency distribution.
Now trace a user function, pthread_mutex_lock in libpthread, to determine if
there is considerable lock contention:
# ./funclatency pthread:pthread_mutex_lock -p $(pidof contentions)
Tracing 1 function for "pthread:pthread_mutex_lock"... Hit Ctrl-C to end.
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 508967 |****************************************|
4096 -> 8191 : 70072 |***** |
8192 -> 16383 : 27686 |** |
16384 -> 32767 : 5075 | |
32768 -> 65535 : 2318 | |
65536 -> 131071 : 581 | |
131072 -> 262143 : 38 | |
262144 -> 524287 : 5 | |
524288 -> 1048575 : 1 | |
1048576 -> 2097151 : 9 | |
Detaching...
It seems that most calls to pthread_mutex_lock completed rather quickly (in
under 4us), but there were some cases of considerable contention, sometimes
over a full millisecond.
Run a quick-and-dirty profiler over all the functions in an executable:
# ./funclatency /home/user/primes:* -p $(pidof primes) -F
Tracing 15 functions for "/home/user/primes:*"... Hit Ctrl-C to end.
^C
Function = is_prime [6556]
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 1495322 |****************************************|
4096 -> 8191 : 95744 |** |
8192 -> 16383 : 9926 | |
16384 -> 32767 : 3070 | |
32768 -> 65535 : 1415 | |
65536 -> 131071 : 112 | |
131072 -> 262143 : 9 | |
262144 -> 524287 : 3 | |
524288 -> 1048575 : 0 | |
1048576 -> 2097151 : 8 | |
Function = insert_result [6556]
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 111047 |****************************************|
4096 -> 8191 : 3998 |* |
8192 -> 16383 : 720 | |
16384 -> 32767 : 238 | |
32768 -> 65535 : 106 | |
65536 -> 131071 : 5 | |
131072 -> 262143 : 4 | |
Detaching...
From the results, we can see that the is_prime function has something resembling
an exponential distribution -- very few primes take a very long time to test,
while most numbers are verified as prime or composite in less than 4us. The
insert_result function exhibits a similar phenomenon, likely due to contention
over a shared results container.
Now vfs_read() is traced, and a microseconds histogram printed:
# ./funclatency -u vfs_read
Tracing vfs_read... Hit Ctrl-C to end.
^C
usecs : count distribution
0 -> 1 : 1143 |**************************************|
2 -> 3 : 420 |************* |
4 -> 7 : 159 |***** |
8 -> 15 : 295 |********* |
16 -> 31 : 25 | |
32 -> 63 : 5 | |
64 -> 127 : 1 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 1 | |
2048 -> 4095 : 0 | |
4096 -> 8191 : 5 | |
8192 -> 16383 : 0 | |
16384 -> 32767 : 0 | |
32768 -> 65535 : 0 | |
65536 -> 131071 : 7 | |
131072 -> 262143 : 7 | |
262144 -> 524287 : 3 | |
524288 -> 1048575 : 7 | |
Detaching...
This shows a bimodal distribution. Many vfs_read() calls were faster than 15
microseconds, however, there was also a small handful between 65 milliseconds
and 1 second, seen at the bottom of the table. These are likely network reads
from SSH, waiting on interactive keystrokes.
Tracing do_nanosleep() in milliseconds:
# ./funclatency -m do_nanosleep
Tracing do_nanosleep... Hit Ctrl-C to end.
^C
msecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 328 |**************************************|
1024 -> 2047 : 0 | |
2048 -> 4095 : 0 | |
4096 -> 8191 : 32 |*** |
8192 -> 16383 : 0 | |
16384 -> 32767 : 0 | |
32768 -> 65535 : 2 | |
Detaching...
This looks like it has found threads that are sleeping every 1, 5, and 60
seconds.
An interval can be provided using -i, and timestamps added using -T. For
example, tracing vfs_read() latency in milliseconds and printing output
every 5 seconds:
# ./funclatency -mTi 5 vfs_read
Tracing vfs_read... Hit Ctrl-C to end.
20:10:08
msecs : count distribution
0 -> 1 : 1500 |*************************************+|
2 -> 3 : 3 | |
4 -> 7 : 1 | |
8 -> 15 : 2 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 4 | |
128 -> 255 : 3 | |
256 -> 511 : 1 | |
512 -> 1023 : 7 | |
20:10:13
msecs : count distribution
0 -> 1 : 1251 |*************************************+|
2 -> 3 : 3 | |
4 -> 7 : 2 | |
8 -> 15 : 0 | |
16 -> 31 : 2 | |
32 -> 63 : 3 | |
64 -> 127 : 5 | |
128 -> 255 : 5 | |
256 -> 511 : 3 | |
512 -> 1023 : 6 | |
1024 -> 2047 : 2 | |
20:10:18
msecs : count distribution
0 -> 1 : 1265 |*************************************+|
2 -> 3 : 0 | |
4 -> 7 : 5 | |
8 -> 15 : 9 | |
16 -> 31 : 7 | |
32 -> 63 : 1 | |
64 -> 127 : 2 | |
128 -> 255 : 3 | |
256 -> 511 : 5 | |
512 -> 1023 : 5 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 1 | |
^C
20:10:20
msecs : count distribution
0 -> 1 : 249 |*************************************+|
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 1 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 1 | |
Detaching...
A single process can be traced, which filters in-kernel for efficiency. Here,
the vfs_read() function is timed as milliseconds for PID 17064, which is a
bash shell:
# ./funclatency -mp 17064 vfs_read
Tracing vfs_read... Hit Ctrl-C to end.
^C
msecs : count distribution
0 -> 1 : 1 |** |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 1 |** |
16 -> 31 : 2 |***** |
32 -> 63 : 0 | |
64 -> 127 : 13 |**************************************|
128 -> 255 : 10 |***************************** |
256 -> 511 : 4 |*********** |
Detaching...
The distribution between 64 and 511 milliseconds shows keystroke latency.
The -F option can be used to print a histogram per function. Eg:
# ./funclatency -uF 'vfs_r*'
Tracing 5 functions for "vfs_r*"... Hit Ctrl-C to end.
^C
Function = vfs_read
usecs : count distribution
0 -> 1 : 1044 |****************************************|
2 -> 3 : 383 |************** |
4 -> 7 : 76 |** |
8 -> 15 : 41 |* |
16 -> 31 : 26 | |
32 -> 63 : 0 | |
64 -> 127 : 1 | |
128 -> 255 : 0 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 4 | |
4096 -> 8191 : 2 | |
8192 -> 16383 : 0 | |
16384 -> 32767 : 0 | |
32768 -> 65535 : 2 | |
65536 -> 131071 : 5 | |
131072 -> 262143 : 5 | |
262144 -> 524287 : 3 | |
524288 -> 1048575 : 7 | |
Function = vfs_rename
usecs : count distribution
0 -> 1 : 2 |**** |
2 -> 3 : 2 |**** |
4 -> 7 : 2 |**** |
8 -> 15 : 0 | |
16 -> 31 : 6 |************* |
32 -> 63 : 18 |****************************************|
Detaching...
USAGE message:
# ./funclatency -h
usage: funclatency [-h] [-p PID] [-i INTERVAL] [-T] [-u] [-m] [-F] [-r] [-v]
pattern
Time functions and print latency as a histogram
positional arguments:
pattern search expression for functions
optional arguments:
-h, --help show this help message and exit
-p PID, --pid PID trace this PID only
-i INTERVAL, --interval INTERVAL
summary interval, seconds
-T, --timestamp include timestamp on output
-u, --microseconds microsecond histogram
-m, --milliseconds millisecond histogram
-F, --function show a separate histogram per function
-r, --regexp use regular expressions. Default is "*" wildcards
only.
-v, --verbose print the BPF program (for debugging purposes)
examples:
./funclatency do_sys_open # time the do_sys_open() kernel function
./funclatency c:read # time the read() C library function
./funclatency -u vfs_read # time vfs_read(), in microseconds
./funclatency -m do_nanosleep # time do_nanosleep(), in milliseconds
./funclatency -mTi 5 vfs_read # output every 5 seconds, with timestamps
./funclatency -p 181 vfs_read # time process 181 only
./funclatency 'vfs_fstat*' # time both vfs_fstat() and vfs_fstatat()
./funclatency 'c:*printf' # time the *printf family of functions
./funclatency -F 'vfs_r*' # show one histogram per matched function