| Demonstrations of argdist. |
| |
| |
| argdist probes functions you specify and collects parameter values into a |
| histogram or a frequency count. This can be used to understand the distribution |
| of values a certain parameter takes, filter and print interesting parameters |
| without attaching a debugger, and obtain general execution statistics on |
| various functions. |
| |
| For example, suppose you want to find what allocation sizes are common in |
| your application: |
| |
| # ./argdist -p 2420 -C 'p:c:malloc(size_t size):size_t:size' |
| [01:42:29] |
| p:c:malloc(size_t size):size_t:size |
| COUNT EVENT |
| [01:42:30] |
| p:c:malloc(size_t size):size_t:size |
| COUNT EVENT |
| [01:42:31] |
| p:c:malloc(size_t size):size_t:size |
| COUNT EVENT |
| 1 size = 16 |
| [01:42:32] |
| p:c:malloc(size_t size):size_t:size |
| COUNT EVENT |
| 2 size = 16 |
| [01:42:33] |
| p:c:malloc(size_t size):size_t:size |
| COUNT EVENT |
| 3 size = 16 |
| [01:42:34] |
| p:c:malloc(size_t size):size_t:size |
| COUNT EVENT |
| 4 size = 16 |
| ^C |
| |
| It seems that the application is allocating blocks of size 16. The COUNT |
| column contains the number of occurrences of a particular event, and the |
| EVENT column describes the event. In this case, the "size" parameter was |
| probed and its value was 16, repeatedly. |
| |
| Now, suppose you wanted a histogram of buffer sizes passed to the write() |
| function across the system: |
| |
| # ./argdist -H 'p:c:write(int fd, void *buf, size_t len):size_t:len' |
| [01:45:22] |
| p:c:write(int fd, void *buf, size_t len):size_t:len |
| len : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 2 |************* | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 2 |************* | |
| 16 -> 31 : 0 | | |
| 32 -> 63 : 6 |****************************************| |
| [01:45:23] |
| p:c:write(int fd, void *buf, size_t len):size_t:len |
| len : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 11 |*************** | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 4 |***** | |
| 16 -> 31 : 0 | | |
| 32 -> 63 : 28 |****************************************| |
| 64 -> 127 : 12 |***************** | |
| [01:45:24] |
| p:c:write(int fd, void *buf, size_t len):size_t:len |
| len : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 21 |**************** | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 6 |**** | |
| 16 -> 31 : 0 | | |
| 32 -> 63 : 52 |****************************************| |
| 64 -> 127 : 26 |******************** | |
| ^C |
| |
| It seems that most writes fall into three buckets: very small writes of 2-3 |
| bytes, medium writes of 32-63 bytes, and larger writes of 64-127 bytes. |
| |
| But these are writes across the board -- what if you wanted to focus on writes |
| to STDOUT? |
| |
| # ./argdist -H 'p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1' |
| [01:47:17] |
| p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1 |
| len : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 0 | | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 1 |****************************************| |
| 16 -> 31 : 0 | | |
| 32 -> 63 : 1 |****************************************| |
| [01:47:18] |
| p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1 |
| len : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 0 | | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 2 |************* | |
| 16 -> 31 : 0 | | |
| 32 -> 63 : 3 |******************** | |
| 64 -> 127 : 6 |****************************************| |
| [01:47:19] |
| p:c:write(int fd, void *buf, size_t len):size_t:len:fd==1 |
| len : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 0 | | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 3 |********* | |
| 16 -> 31 : 0 | | |
| 32 -> 63 : 5 |*************** | |
| 64 -> 127 : 13 |****************************************| |
| ^C |
| |
| The "fd==1" part is a filter that is applied to every invocation of write(). |
| Only if the filter condition is true, the value is recorded. |
| |
| You can also use argdist to trace kernel functions. For example, suppose you |
| wanted a histogram of kernel allocation (kmalloc) sizes across the system, |
| printed twice with 3 second intervals: |
| |
| # ./argdist -i 3 -n 2 -H 'p::__kmalloc(size_t size):size_t:size' |
| [01:50:00] |
| p::__kmalloc(size_t size):size_t:size |
| size : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 0 | | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 6 |****************************************| |
| [01:50:03] |
| p::__kmalloc(size_t size):size_t:size |
| size : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 0 | | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 22 |****************************************| |
| 16 -> 31 : 0 | | |
| 32 -> 63 : 0 | | |
| 64 -> 127 : 5 |********* | |
| 128 -> 255 : 2 |*** | |
| |
| Occasionally, numeric information isn't enough and you want to capture strings. |
| What are the strings printed by puts() across the system? |
| |
| # ./argdist -i 10 -n 1 -C 'p:c:puts(char *str):char*:str' |
| [01:53:54] |
| p:c:puts(char *str):char*:str |
| COUNT EVENT |
| 2 str = Press ENTER to start. |
| |
| It looks like the message "Press ENTER to start." was printed twice during the |
| 10 seconds we were tracing. |
| |
| What about reads? You could trace gets() across the system and print the |
| strings input by the user (note how "r" is used instead of "p" to attach a |
| probe to the function's return): |
| |
| # ./argdist -i 10 -n 1 -C 'r:c:gets():char*:(char*)$retval:$retval!=0' |
| [02:12:23] |
| r:c:gets():char*:$retval:$retval!=0 |
| COUNT EVENT |
| 1 (char*)$retval = hi there |
| 3 (char*)$retval = sasha |
| 8 (char*)$retval = hello |
| |
| Similarly, we could get a histogram of the error codes returned by read(): |
| |
| # ./argdist -i 10 -c 1 -H 'r:c:read()' |
| [02:15:36] |
| r:c:read() |
| retval : count distribution |
| 0 -> 1 : 29 |****************************************| |
| 2 -> 3 : 11 |*************** | |
| 4 -> 7 : 0 | | |
| 8 -> 15 : 3 |**** | |
| 16 -> 31 : 2 |** | |
| 32 -> 63 : 22 |****************************** | |
| 64 -> 127 : 5 |****** | |
| 128 -> 255 : 0 | | |
| 256 -> 511 : 1 |* | |
| 512 -> 1023 : 1 |* | |
| 1024 -> 2047 : 0 | | |
| 2048 -> 4095 : 2 |** | |
| |
| In return probes, you can also trace the latency of the function (unless it is |
| recursive) and the parameters it had on entry. For example, we can identify |
| which processes are performing slow synchronous filesystem reads -- say, |
| longer than 0.1ms (100,000ns): |
| |
| # ./argdist -C 'r::__vfs_read():u32:$PID:$latency > 100000' |
| [01:08:48] |
| r::__vfs_read():u32:$PID:$latency > 100000 |
| COUNT EVENT |
| 1 $PID = 10457 |
| 21 $PID = 2780 |
| [01:08:49] |
| r::__vfs_read():u32:$PID:$latency > 100000 |
| COUNT EVENT |
| 1 $PID = 10457 |
| 21 $PID = 2780 |
| ^C |
| |
| It looks like process 2780 performed 21 slow reads. |
| |
| Occasionally, entry parameter values are also interesting. For example, you |
| might be curious how long it takes malloc() to allocate memory -- nanoseconds |
| per byte allocated. Let's go: |
| |
| # ./argdist -H 'r:c:malloc(size_t size):u64:$latency/$entry(size);ns per byte' -n 1 -i 10 |
| [01:11:13] |
| ns per byte : count distribution |
| 0 -> 1 : 0 | | |
| 2 -> 3 : 4 |***************** | |
| 4 -> 7 : 3 |************* | |
| 8 -> 15 : 2 |******** | |
| 16 -> 31 : 1 |**** | |
| 32 -> 63 : 0 | | |
| 64 -> 127 : 7 |******************************* | |
| 128 -> 255 : 1 |**** | |
| 256 -> 511 : 0 | | |
| 512 -> 1023 : 1 |**** | |
| 1024 -> 2047 : 1 |**** | |
| 2048 -> 4095 : 9 |****************************************| |
| 4096 -> 8191 : 1 |**** | |
| |
| It looks like a tri-modal distribution. Some allocations are extremely cheap, |
| and take 2-15 nanoseconds per byte. Other allocations are slower, and take |
| 64-127 nanoseconds per byte. And some allocations are slower still, and take |
| multiple microseconds per byte. |
| |
| You could also group results by more than one field. For example, __kmalloc |
| takes an additional flags parameter that describes how to allocate memory: |
| |
| # ./argdist -C 'p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size' |
| [03:42:29] |
| p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size |
| COUNT EVENT |
| 1 flags = 16, size = 152 |
| 2 flags = 131280, size = 8 |
| 7 flags = 131280, size = 16 |
| [03:42:30] |
| p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size |
| COUNT EVENT |
| 1 flags = 16, size = 152 |
| 6 flags = 131280, size = 8 |
| 19 flags = 131280, size = 16 |
| [03:42:31] |
| p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size |
| COUNT EVENT |
| 2 flags = 16, size = 152 |
| 10 flags = 131280, size = 8 |
| 31 flags = 131280, size = 16 |
| [03:42:32] |
| p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size |
| COUNT EVENT |
| 2 flags = 16, size = 152 |
| 14 flags = 131280, size = 8 |
| 43 flags = 131280, size = 16 |
| ^C |
| |
| The flags value must be expanded by hand, but it's still helpful to eliminate |
| certain kinds of allocations or visually group them together. |
| |
| argdist also has basic support for kernel tracepoints. It is sometimes more |
| convenient to use tracepoints because they are documented and don't vary a lot |
| between kernel versions like function signatures tend to. For example, let's |
| trace the net:net_dev_start_xmit tracepoint and print the interface name that |
| is transmitting: |
| |
| # argdist -C 't:net:net_dev_start_xmit(void *a, void *b, struct net_device *c):char*:c->name' -n 2 |
| [05:01:10] |
| t:net:net_dev_start_xmit(void *a, void *b, struct net_device *c):char*:c->name |
| COUNT EVENT |
| 4 c->name = eth0 |
| [05:01:11] |
| t:net:net_dev_start_xmit(void *a, void *b, struct net_device *c):char*:c->name |
| COUNT EVENT |
| 6 c->name = lo |
| 92 c->name = eth0 |
| |
| Note that to determine the necessary function signature you need to look at the |
| TP_PROTO declaration in the kernel headers. For example, the net_dev_start_xmit |
| tracepoint is defined in the include/trace/events/net.h header file. |
| |
| Here's a final example that finds how many write() system calls are performed |
| by each process on the system: |
| |
| # argdist -C 'p:c:write():int:$PID;write per process' -n 2 |
| [06:47:18] |
| write by process |
| COUNT EVENT |
| 3 $PID = 8889 |
| 7 $PID = 7615 |
| 7 $PID = 2480 |
| [06:47:19] |
| write by process |
| COUNT EVENT |
| 9 $PID = 8889 |
| 23 $PID = 7615 |
| 23 $PID = 2480 |
| |
| |
| USAGE message: |
| |
| # argdist -h |
| usage: argdist [-h] [-p PID] [-z STRING_SIZE] [-i INTERVAL] [-n COUNT] [-v] |
| [-T TOP] [-H [specifier [specifier ...]]] |
| [-C [specifier [specifier ...]]] [-I [header [header ...]]] |
| |
| Trace a function and display a summary of its parameter values. |
| |
| optional arguments: |
| -h, --help show this help message and exit |
| -p PID, --pid PID id of the process to trace (optional) |
| -z STRING_SIZE, --string-size STRING_SIZE |
| maximum string size to read from char* arguments |
| -i INTERVAL, --interval INTERVAL |
| output interval, in seconds |
| -n COUNT, --number COUNT |
| number of outputs |
| -v, --verbose print resulting BPF program code before executing |
| -T TOP, --top TOP number of top results to show (not applicable to |
| histograms) |
| -H [specifier [specifier ...]], --histogram [specifier [specifier ...]] |
| probe specifier to capture histogram of (see examples |
| below) |
| -C [specifier [specifier ...]], --count [specifier [specifier ...]] |
| probe specifier to capture count of (see examples |
| below) |
| -I [header [header ...]], --include [header [header ...]] |
| additional header files to include in the BPF program |
| |
| Probe specifier syntax: |
| {p,r,t}:{[library],category}:function(signature)[:type[,type...]:expr[,expr...][:filter]][#label] |
| Where: |
| p,r,t -- probe at function entry, function exit, or kernel tracepoint |
| in exit probes: can use $retval, $entry(param), $latency |
| library -- the library that contains the function |
| (leave empty for kernel functions) |
| category -- the category of the kernel tracepoint (e.g. net, sched) |
| signature -- the function's parameters, as in the C header |
| type -- the type of the expression to collect (supports multiple) |
| expr -- the expression to collect (supports multiple) |
| filter -- the filter that is applied to collected values |
| label -- the label for this probe in the resulting output |
| |
| EXAMPLES: |
| |
| argdist -H 'p::__kmalloc(u64 size):u64:size' |
| Print a histogram of allocation sizes passed to kmalloc |
| |
| argdist -p 1005 -C 'p:c:malloc(size_t size):size_t:size:size==16' |
| Print a frequency count of how many times process 1005 called malloc |
| with an allocation size of 16 bytes |
| |
| argdist -C 'r:c:gets():char*:$retval#snooped strings' |
| Snoop on all strings returned by gets() |
| |
| argdist -H 'r::__kmalloc(size_t size):u64:$latency/$entry(size)#ns per byte' |
| Print a histogram of nanoseconds per byte from kmalloc allocations |
| |
| argdist -C 'p::__kmalloc(size_t size, gfp_t flags):size_t:size:flags&GFP_ATOMIC' |
| Print frequency count of kmalloc allocation sizes that have GFP_ATOMIC |
| |
| argdist -p 1005 -C 'p:c:write(int fd):int:fd' -T 5 |
| Print frequency counts of how many times writes were issued to a |
| particular file descriptor number, in process 1005, but only show |
| the top 5 busiest fds |
| |
| argdist -p 1005 -H 'r:c:read()' |
| Print a histogram of error codes returned by read() in process 1005 |
| |
| argdist -C 'r::__vfs_read():u32:$PID:$latency > 100000' |
| Print frequency of reads by process where the latency was >0.1ms |
| |
| argdist -H 'r::__vfs_read(void *file, void *buf, size_t count):size_t:$entry(count):$latency > 1000000' |
| Print a histogram of read sizes that were longer than 1ms |
| |
| argdist -H \ |
| 'p:c:write(int fd, const void *buf, size_t count):size_t:count:fd==1' |
| Print a histogram of buffer sizes passed to write() across all |
| processes, where the file descriptor was 1 (STDOUT) |
| |
| argdist -C 'p:c:fork()#fork calls' |
| Count fork() calls in libc across all processes |
| Can also use funccount.py, which is easier and more flexible |
| |
| argdist -H 't:block:block_rq_complete():u32:tp.nr_sector' |
| Print histogram of number of sectors in completing block I/O requests |
| |
| argdist -C 't:irq:irq_handler_entry():int:tp.irq' |
| Aggregate interrupts by interrupt request (IRQ) |
| |
| argdist -H \ |
| 'p:c:sleep(u32 seconds):u32:seconds' \ |
| 'p:c:nanosleep(struct timespec *req):long:req->tv_nsec' |
| Print histograms of sleep() and nanosleep() parameter values |
| |
| argdist -p 2780 -z 120 \ |
| -C 'p:c:write(int fd, char* buf, size_t len):char*:buf:fd==1' |
| Spy on writes to STDOUT performed by process 2780, up to a string size |
| of 120 characters |