| /* Copyright 2013 Google Inc. All Rights Reserved. |
| |
| Distributed under MIT license. |
| See file LICENSE for detail or copy at https://opensource.org/licenses/MIT |
| */ |
| |
| /* Implementation of Brotli compressor. */ |
| |
| #include <brotli/encode.h> |
| |
| #include <stdlib.h> /* free, malloc */ |
| #include <string.h> /* memcpy, memset */ |
| |
| #include "../common/version.h" |
| #include "./backward_references.h" |
| #include "./bit_cost.h" |
| #include "./brotli_bit_stream.h" |
| #include "./compress_fragment.h" |
| #include "./compress_fragment_two_pass.h" |
| #include "./context.h" |
| #include "./entropy_encode.h" |
| #include "./fast_log.h" |
| #include "./hash.h" |
| #include "./histogram.h" |
| #include "./memory.h" |
| #include "./metablock.h" |
| #include "./port.h" |
| #include "./prefix.h" |
| #include "./quality.h" |
| #include "./ringbuffer.h" |
| #include "./utf8_util.h" |
| #include "./write_bits.h" |
| |
| #if defined(__cplusplus) || defined(c_plusplus) |
| extern "C" { |
| #endif |
| |
| #define COPY_ARRAY(dst, src) memcpy(dst, src, sizeof(src)); |
| |
| typedef enum BrotliEncoderStreamState { |
| /* Default state. */ |
| BROTLI_STREAM_PROCESSING = 0, |
| /* Intermediate state; after next block is emitted, byte-padding should be |
| performed before getting back to default state. */ |
| BROTLI_STREAM_FLUSH_REQUESTED = 1, |
| /* Last metablock was produced; no more input is acceptable. */ |
| BROTLI_STREAM_FINISHED = 2, |
| /* Flushing compressed block and writing metada block header. */ |
| BROTLI_STREAM_METADATA_HEAD = 3, |
| /* Writing metadata block body. */ |
| BROTLI_STREAM_METADATA_BODY = 4 |
| } BrotliEncoderStreamState; |
| |
| typedef struct BrotliEncoderStateStruct { |
| BrotliEncoderParams params; |
| |
| MemoryManager memory_manager_; |
| |
| Hashers hashers_; |
| uint64_t input_pos_; |
| RingBuffer ringbuffer_; |
| size_t cmd_alloc_size_; |
| Command* commands_; |
| size_t num_commands_; |
| size_t num_literals_; |
| size_t last_insert_len_; |
| uint64_t last_flush_pos_; |
| uint64_t last_processed_pos_; |
| int dist_cache_[4]; |
| int saved_dist_cache_[4]; |
| uint8_t last_byte_; |
| uint8_t last_byte_bits_; |
| uint8_t prev_byte_; |
| uint8_t prev_byte2_; |
| size_t storage_size_; |
| uint8_t* storage_; |
| /* Hash table for FAST_ONE_PASS_COMPRESSION_QUALITY mode. */ |
| int small_table_[1 << 10]; /* 4KiB */ |
| int* large_table_; /* Allocated only when needed */ |
| size_t large_table_size_; |
| /* Command and distance prefix codes (each 64 symbols, stored back-to-back) |
| used for the next block in FAST_ONE_PASS_COMPRESSION_QUALITY. The command |
| prefix code is over a smaller alphabet with the following 64 symbols: |
| 0 - 15: insert length code 0, copy length code 0 - 15, same distance |
| 16 - 39: insert length code 0, copy length code 0 - 23 |
| 40 - 63: insert length code 0 - 23, copy length code 0 |
| Note that symbols 16 and 40 represent the same code in the full alphabet, |
| but we do not use either of them in FAST_ONE_PASS_COMPRESSION_QUALITY. */ |
| uint8_t cmd_depths_[128]; |
| uint16_t cmd_bits_[128]; |
| /* The compressed form of the command and distance prefix codes for the next |
| block in FAST_ONE_PASS_COMPRESSION_QUALITY. */ |
| uint8_t cmd_code_[512]; |
| size_t cmd_code_numbits_; |
| /* Command and literal buffers for FAST_TWO_PASS_COMPRESSION_QUALITY. */ |
| uint32_t* command_buf_; |
| uint8_t* literal_buf_; |
| |
| uint8_t* next_out_; |
| size_t available_out_; |
| size_t total_out_; |
| /* Temporary buffer for padding flush bits or metadata block header / body. */ |
| union { |
| uint64_t u64[2]; |
| uint8_t u8[16]; |
| } tiny_buf_; |
| uint32_t remaining_metadata_bytes_; |
| BrotliEncoderStreamState stream_state_; |
| |
| BROTLI_BOOL is_last_block_emitted_; |
| BROTLI_BOOL is_initialized_; |
| } BrotliEncoderStateStruct; |
| |
| static BROTLI_BOOL EnsureInitialized(BrotliEncoderState* s); |
| |
| static size_t InputBlockSize(BrotliEncoderState* s) { |
| if (!EnsureInitialized(s)) return 0; |
| return (size_t)1 << s->params.lgblock; |
| } |
| |
| static uint64_t UnprocessedInputSize(BrotliEncoderState* s) { |
| return s->input_pos_ - s->last_processed_pos_; |
| } |
| |
| static size_t RemainingInputBlockSize(BrotliEncoderState* s) { |
| const uint64_t delta = UnprocessedInputSize(s); |
| size_t block_size = InputBlockSize(s); |
| if (delta >= block_size) return 0; |
| return block_size - (size_t)delta; |
| } |
| |
| BROTLI_BOOL BrotliEncoderSetParameter( |
| BrotliEncoderState* state, BrotliEncoderParameter p, uint32_t value) { |
| /* Changing parameters on the fly is not implemented yet. */ |
| if (state->is_initialized_) return BROTLI_FALSE; |
| /* TODO: Validate/clamp params here. */ |
| switch (p) { |
| case BROTLI_PARAM_MODE: |
| state->params.mode = (BrotliEncoderMode)value; |
| return BROTLI_TRUE; |
| |
| case BROTLI_PARAM_QUALITY: |
| state->params.quality = (int)value; |
| return BROTLI_TRUE; |
| |
| case BROTLI_PARAM_LGWIN: |
| state->params.lgwin = (int)value; |
| return BROTLI_TRUE; |
| |
| case BROTLI_PARAM_LGBLOCK: |
| state->params.lgblock = (int)value; |
| return BROTLI_TRUE; |
| |
| default: return BROTLI_FALSE; |
| } |
| } |
| |
| static void RecomputeDistancePrefixes(Command* cmds, |
| size_t num_commands, |
| uint32_t num_direct_distance_codes, |
| uint32_t distance_postfix_bits) { |
| size_t i; |
| if (num_direct_distance_codes == 0 && distance_postfix_bits == 0) { |
| return; |
| } |
| for (i = 0; i < num_commands; ++i) { |
| Command* cmd = &cmds[i]; |
| if (CommandCopyLen(cmd) && cmd->cmd_prefix_ >= 128) { |
| PrefixEncodeCopyDistance(CommandRestoreDistanceCode(cmd), |
| num_direct_distance_codes, |
| distance_postfix_bits, |
| &cmd->dist_prefix_, |
| &cmd->dist_extra_); |
| } |
| } |
| } |
| |
| /* Wraps 64-bit input position to 32-bit ringbuffer position preserving |
| "not-a-first-lap" feature. */ |
| static uint32_t WrapPosition(uint64_t position) { |
| uint32_t result = (uint32_t)position; |
| uint64_t gb = position >> 30; |
| if (gb > 2) { |
| /* Wrap every 2GiB; The first 3GB are continous. */ |
| result = (result & ((1u << 30) - 1)) | ((uint32_t)((gb - 1) & 1) + 1) << 30; |
| } |
| return result; |
| } |
| |
| static uint8_t* GetBrotliStorage(BrotliEncoderState* s, size_t size) { |
| MemoryManager* m = &s->memory_manager_; |
| if (s->storage_size_ < size) { |
| BROTLI_FREE(m, s->storage_); |
| s->storage_ = BROTLI_ALLOC(m, uint8_t, size); |
| if (BROTLI_IS_OOM(m)) return NULL; |
| s->storage_size_ = size; |
| } |
| return s->storage_; |
| } |
| |
| static size_t HashTableSize(size_t max_table_size, size_t input_size) { |
| size_t htsize = 256; |
| while (htsize < max_table_size && htsize < input_size) { |
| htsize <<= 1; |
| } |
| return htsize; |
| } |
| |
| static int* GetHashTable(BrotliEncoderState* s, int quality, |
| size_t input_size, size_t* table_size) { |
| /* Use smaller hash table when input.size() is smaller, since we |
| fill the table, incurring O(hash table size) overhead for |
| compression, and if the input is short, we won't need that |
| many hash table entries anyway. */ |
| MemoryManager* m = &s->memory_manager_; |
| const size_t max_table_size = MaxHashTableSize(quality); |
| size_t htsize = HashTableSize(max_table_size, input_size); |
| int* table; |
| assert(max_table_size >= 256); |
| if (quality == FAST_ONE_PASS_COMPRESSION_QUALITY) { |
| /* Only odd shifts are supported by fast-one-pass. */ |
| if ((htsize & 0xAAAAA) == 0) { |
| htsize <<= 1; |
| } |
| } |
| |
| if (htsize <= sizeof(s->small_table_) / sizeof(s->small_table_[0])) { |
| table = s->small_table_; |
| } else { |
| if (htsize > s->large_table_size_) { |
| s->large_table_size_ = htsize; |
| BROTLI_FREE(m, s->large_table_); |
| s->large_table_ = BROTLI_ALLOC(m, int, htsize); |
| if (BROTLI_IS_OOM(m)) return 0; |
| } |
| table = s->large_table_; |
| } |
| |
| *table_size = htsize; |
| memset(table, 0, htsize * sizeof(*table)); |
| return table; |
| } |
| |
| static void EncodeWindowBits(int lgwin, uint8_t* last_byte, |
| uint8_t* last_byte_bits) { |
| if (lgwin == 16) { |
| *last_byte = 0; |
| *last_byte_bits = 1; |
| } else if (lgwin == 17) { |
| *last_byte = 1; |
| *last_byte_bits = 7; |
| } else if (lgwin > 17) { |
| *last_byte = (uint8_t)(((lgwin - 17) << 1) | 1); |
| *last_byte_bits = 4; |
| } else { |
| *last_byte = (uint8_t)(((lgwin - 8) << 4) | 1); |
| *last_byte_bits = 7; |
| } |
| } |
| |
| /* Initializes the command and distance prefix codes for the first block. */ |
| static void InitCommandPrefixCodes(uint8_t cmd_depths[128], |
| uint16_t cmd_bits[128], |
| uint8_t cmd_code[512], |
| size_t* cmd_code_numbits) { |
| static const uint8_t kDefaultCommandDepths[128] = { |
| 0, 4, 4, 5, 6, 6, 7, 7, 7, 7, 7, 8, 8, 8, 8, 8, |
| 0, 0, 0, 4, 4, 4, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, |
| 7, 7, 10, 10, 10, 10, 10, 10, 0, 4, 4, 5, 5, 5, 6, 6, |
| 7, 8, 8, 9, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, |
| 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 6, 6, 6, 6, 6, 6, 5, 5, 5, 5, 5, 5, 4, 4, 4, 4, |
| 4, 4, 4, 5, 5, 5, 5, 5, 5, 6, 6, 7, 7, 7, 8, 10, |
| 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, |
| }; |
| static const uint16_t kDefaultCommandBits[128] = { |
| 0, 0, 8, 9, 3, 35, 7, 71, |
| 39, 103, 23, 47, 175, 111, 239, 31, |
| 0, 0, 0, 4, 12, 2, 10, 6, |
| 13, 29, 11, 43, 27, 59, 87, 55, |
| 15, 79, 319, 831, 191, 703, 447, 959, |
| 0, 14, 1, 25, 5, 21, 19, 51, |
| 119, 159, 95, 223, 479, 991, 63, 575, |
| 127, 639, 383, 895, 255, 767, 511, 1023, |
| 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 27, 59, 7, 39, 23, 55, 30, 1, 17, 9, 25, 5, 0, 8, 4, 12, |
| 2, 10, 6, 21, 13, 29, 3, 19, 11, 15, 47, 31, 95, 63, 127, 255, |
| 767, 2815, 1791, 3839, 511, 2559, 1535, 3583, 1023, 3071, 2047, 4095, |
| }; |
| static const uint8_t kDefaultCommandCode[] = { |
| 0xff, 0x77, 0xd5, 0xbf, 0xe7, 0xde, 0xea, 0x9e, 0x51, 0x5d, 0xde, 0xc6, |
| 0x70, 0x57, 0xbc, 0x58, 0x58, 0x58, 0xd8, 0xd8, 0x58, 0xd5, 0xcb, 0x8c, |
| 0xea, 0xe0, 0xc3, 0x87, 0x1f, 0x83, 0xc1, 0x60, 0x1c, 0x67, 0xb2, 0xaa, |
| 0x06, 0x83, 0xc1, 0x60, 0x30, 0x18, 0xcc, 0xa1, 0xce, 0x88, 0x54, 0x94, |
| 0x46, 0xe1, 0xb0, 0xd0, 0x4e, 0xb2, 0xf7, 0x04, 0x00, |
| }; |
| static const size_t kDefaultCommandCodeNumBits = 448; |
| COPY_ARRAY(cmd_depths, kDefaultCommandDepths); |
| COPY_ARRAY(cmd_bits, kDefaultCommandBits); |
| |
| /* Initialize the pre-compressed form of the command and distance prefix |
| codes. */ |
| COPY_ARRAY(cmd_code, kDefaultCommandCode); |
| *cmd_code_numbits = kDefaultCommandCodeNumBits; |
| } |
| |
| /* Decide about the context map based on the ability of the prediction |
| ability of the previous byte UTF8-prefix on the next byte. The |
| prediction ability is calculated as shannon entropy. Here we need |
| shannon entropy instead of 'BitsEntropy' since the prefix will be |
| encoded with the remaining 6 bits of the following byte, and |
| BitsEntropy will assume that symbol to be stored alone using Huffman |
| coding. */ |
| static void ChooseContextMap(int quality, |
| uint32_t* bigram_histo, |
| size_t* num_literal_contexts, |
| const uint32_t** literal_context_map) { |
| static const uint32_t kStaticContextMapContinuation[64] = { |
| 1, 1, 2, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| }; |
| static const uint32_t kStaticContextMapSimpleUTF8[64] = { |
| 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| }; |
| |
| uint32_t monogram_histo[3] = { 0 }; |
| uint32_t two_prefix_histo[6] = { 0 }; |
| size_t total = 0; |
| size_t i; |
| size_t dummy; |
| double entropy[4]; |
| for (i = 0; i < 9; ++i) { |
| size_t j = i; |
| total += bigram_histo[i]; |
| monogram_histo[i % 3] += bigram_histo[i]; |
| if (j >= 6) { |
| j -= 6; |
| } |
| two_prefix_histo[j] += bigram_histo[i]; |
| } |
| entropy[1] = ShannonEntropy(monogram_histo, 3, &dummy); |
| entropy[2] = (ShannonEntropy(two_prefix_histo, 3, &dummy) + |
| ShannonEntropy(two_prefix_histo + 3, 3, &dummy)); |
| entropy[3] = 0; |
| for (i = 0; i < 3; ++i) { |
| entropy[3] += ShannonEntropy(bigram_histo + 3 * i, 3, &dummy); |
| } |
| |
| assert(total != 0); |
| entropy[0] = 1.0 / (double)total; |
| entropy[1] *= entropy[0]; |
| entropy[2] *= entropy[0]; |
| entropy[3] *= entropy[0]; |
| |
| if (quality < MIN_QUALITY_FOR_HQ_CONTEXT_MODELING) { |
| /* 3 context models is a bit slower, don't use it at lower qualities. */ |
| entropy[3] = entropy[1] * 10; |
| } |
| /* If expected savings by symbol are less than 0.2 bits, skip the |
| context modeling -- in exchange for faster decoding speed. */ |
| if (entropy[1] - entropy[2] < 0.2 && |
| entropy[1] - entropy[3] < 0.2) { |
| *num_literal_contexts = 1; |
| } else if (entropy[2] - entropy[3] < 0.02) { |
| *num_literal_contexts = 2; |
| *literal_context_map = kStaticContextMapSimpleUTF8; |
| } else { |
| *num_literal_contexts = 3; |
| *literal_context_map = kStaticContextMapContinuation; |
| } |
| } |
| |
| static void DecideOverLiteralContextModeling(const uint8_t* input, |
| size_t start_pos, size_t length, size_t mask, int quality, |
| ContextType* literal_context_mode, size_t* num_literal_contexts, |
| const uint32_t** literal_context_map) { |
| if (quality < MIN_QUALITY_FOR_CONTEXT_MODELING || length < 64) { |
| return; |
| } else { |
| /* Gather bigram data of the UTF8 byte prefixes. To make the analysis of |
| UTF8 data faster we only examine 64 byte long strides at every 4kB |
| intervals. */ |
| const size_t end_pos = start_pos + length; |
| uint32_t bigram_prefix_histo[9] = { 0 }; |
| for (; start_pos + 64 <= end_pos; start_pos += 4096) { |
| static const int lut[4] = { 0, 0, 1, 2 }; |
| const size_t stride_end_pos = start_pos + 64; |
| int prev = lut[input[start_pos & mask] >> 6] * 3; |
| size_t pos; |
| for (pos = start_pos + 1; pos < stride_end_pos; ++pos) { |
| const uint8_t literal = input[pos & mask]; |
| ++bigram_prefix_histo[prev + lut[literal >> 6]]; |
| prev = lut[literal >> 6] * 3; |
| } |
| } |
| *literal_context_mode = CONTEXT_UTF8; |
| ChooseContextMap(quality, &bigram_prefix_histo[0], num_literal_contexts, |
| literal_context_map); |
| } |
| } |
| |
| static BROTLI_BOOL ShouldCompress( |
| const uint8_t* data, const size_t mask, const uint64_t last_flush_pos, |
| const size_t bytes, const size_t num_literals, const size_t num_commands) { |
| if (num_commands < (bytes >> 8) + 2) { |
| if (num_literals > 0.99 * (double)bytes) { |
| uint32_t literal_histo[256] = { 0 }; |
| static const uint32_t kSampleRate = 13; |
| static const double kMinEntropy = 7.92; |
| const double bit_cost_threshold = |
| (double)bytes * kMinEntropy / kSampleRate; |
| size_t t = (bytes + kSampleRate - 1) / kSampleRate; |
| uint32_t pos = (uint32_t)last_flush_pos; |
| size_t i; |
| for (i = 0; i < t; i++) { |
| ++literal_histo[data[pos & mask]]; |
| pos += kSampleRate; |
| } |
| if (BitsEntropy(literal_histo, 256) > bit_cost_threshold) { |
| return BROTLI_FALSE; |
| } |
| } |
| } |
| return BROTLI_TRUE; |
| } |
| |
| static void WriteMetaBlockInternal(MemoryManager* m, |
| const uint8_t* data, |
| const size_t mask, |
| const uint64_t last_flush_pos, |
| const size_t bytes, |
| const BROTLI_BOOL is_last, |
| const BrotliEncoderParams* params, |
| const uint8_t prev_byte, |
| const uint8_t prev_byte2, |
| const size_t num_literals, |
| const size_t num_commands, |
| Command* commands, |
| const int* saved_dist_cache, |
| int* dist_cache, |
| size_t* storage_ix, |
| uint8_t* storage) { |
| const uint32_t wrapped_last_flush_pos = WrapPosition(last_flush_pos); |
| uint8_t last_byte; |
| uint8_t last_byte_bits; |
| uint32_t num_direct_distance_codes = 0; |
| uint32_t distance_postfix_bits = 0; |
| |
| if (bytes == 0) { |
| /* Write the ISLAST and ISEMPTY bits. */ |
| BrotliWriteBits(2, 3, storage_ix, storage); |
| *storage_ix = (*storage_ix + 7u) & ~7u; |
| return; |
| } |
| |
| if (!ShouldCompress(data, mask, last_flush_pos, bytes, |
| num_literals, num_commands)) { |
| /* Restore the distance cache, as its last update by |
| CreateBackwardReferences is now unused. */ |
| memcpy(dist_cache, saved_dist_cache, 4 * sizeof(dist_cache[0])); |
| BrotliStoreUncompressedMetaBlock(is_last, data, |
| wrapped_last_flush_pos, mask, bytes, |
| storage_ix, storage); |
| return; |
| } |
| |
| last_byte = storage[0]; |
| last_byte_bits = (uint8_t)(*storage_ix & 0xff); |
| if (params->quality >= MIN_QUALITY_FOR_RECOMPUTE_DISTANCE_PREFIXES && |
| params->mode == BROTLI_MODE_FONT) { |
| num_direct_distance_codes = 12; |
| distance_postfix_bits = 1; |
| RecomputeDistancePrefixes(commands, |
| num_commands, |
| num_direct_distance_codes, |
| distance_postfix_bits); |
| } |
| if (params->quality <= MAX_QUALITY_FOR_STATIC_ENRTOPY_CODES) { |
| BrotliStoreMetaBlockFast(m, data, wrapped_last_flush_pos, |
| bytes, mask, is_last, |
| commands, num_commands, |
| storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return; |
| } else if (params->quality < MIN_QUALITY_FOR_BLOCK_SPLIT) { |
| BrotliStoreMetaBlockTrivial(m, data, wrapped_last_flush_pos, |
| bytes, mask, is_last, |
| commands, num_commands, |
| storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return; |
| } else { |
| ContextType literal_context_mode = CONTEXT_UTF8; |
| MetaBlockSplit mb; |
| InitMetaBlockSplit(&mb); |
| if (params->quality < MIN_QUALITY_FOR_HQ_BLOCK_SPLITTING) { |
| size_t num_literal_contexts = 1; |
| const uint32_t* literal_context_map = NULL; |
| DecideOverLiteralContextModeling(data, wrapped_last_flush_pos, |
| bytes, mask, |
| params->quality, |
| &literal_context_mode, |
| &num_literal_contexts, |
| &literal_context_map); |
| if (literal_context_map == NULL) { |
| BrotliBuildMetaBlockGreedy(m, data, wrapped_last_flush_pos, mask, |
| commands, num_commands, &mb); |
| if (BROTLI_IS_OOM(m)) return; |
| } else { |
| BrotliBuildMetaBlockGreedyWithContexts(m, data, |
| wrapped_last_flush_pos, |
| mask, |
| prev_byte, prev_byte2, |
| literal_context_mode, |
| num_literal_contexts, |
| literal_context_map, |
| commands, num_commands, |
| &mb); |
| if (BROTLI_IS_OOM(m)) return; |
| } |
| } else { |
| if (!BrotliIsMostlyUTF8(data, wrapped_last_flush_pos, mask, bytes, |
| kMinUTF8Ratio)) { |
| literal_context_mode = CONTEXT_SIGNED; |
| } |
| BrotliBuildMetaBlock(m, data, wrapped_last_flush_pos, mask, params, |
| prev_byte, prev_byte2, |
| commands, num_commands, |
| literal_context_mode, |
| &mb); |
| if (BROTLI_IS_OOM(m)) return; |
| } |
| if (params->quality >= MIN_QUALITY_FOR_OPTIMIZE_HISTOGRAMS) { |
| BrotliOptimizeHistograms(num_direct_distance_codes, |
| distance_postfix_bits, |
| &mb); |
| } |
| BrotliStoreMetaBlock(m, data, wrapped_last_flush_pos, bytes, mask, |
| prev_byte, prev_byte2, |
| is_last, |
| num_direct_distance_codes, |
| distance_postfix_bits, |
| literal_context_mode, |
| commands, num_commands, |
| &mb, |
| storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return; |
| DestroyMetaBlockSplit(m, &mb); |
| } |
| if (bytes + 4 < (*storage_ix >> 3)) { |
| /* Restore the distance cache and last byte. */ |
| memcpy(dist_cache, saved_dist_cache, 4 * sizeof(dist_cache[0])); |
| storage[0] = last_byte; |
| *storage_ix = last_byte_bits; |
| BrotliStoreUncompressedMetaBlock(is_last, data, |
| wrapped_last_flush_pos, mask, |
| bytes, storage_ix, storage); |
| } |
| } |
| |
| static BROTLI_BOOL EnsureInitialized(BrotliEncoderState* s) { |
| if (BROTLI_IS_OOM(&s->memory_manager_)) return BROTLI_FALSE; |
| if (s->is_initialized_) return BROTLI_TRUE; |
| |
| SanitizeParams(&s->params); |
| s->params.lgblock = ComputeLgBlock(&s->params); |
| |
| s->remaining_metadata_bytes_ = BROTLI_UINT32_MAX; |
| |
| RingBufferSetup(&s->params, &s->ringbuffer_); |
| |
| /* Initialize last byte with stream header. */ |
| { |
| int lgwin = s->params.lgwin; |
| if (s->params.quality == FAST_ONE_PASS_COMPRESSION_QUALITY || |
| s->params.quality == FAST_TWO_PASS_COMPRESSION_QUALITY) { |
| lgwin = BROTLI_MAX(int, lgwin, 18); |
| } |
| EncodeWindowBits(lgwin, &s->last_byte_, &s->last_byte_bits_); |
| } |
| |
| if (s->params.quality == FAST_ONE_PASS_COMPRESSION_QUALITY) { |
| InitCommandPrefixCodes(s->cmd_depths_, s->cmd_bits_, |
| s->cmd_code_, &s->cmd_code_numbits_); |
| } |
| |
| /* Initialize hashers. */ |
| HashersSetup(&s->memory_manager_, &s->hashers_, ChooseHasher(&s->params)); |
| if (BROTLI_IS_OOM(&s->memory_manager_)) return BROTLI_FALSE; |
| |
| s->is_initialized_ = BROTLI_TRUE; |
| return BROTLI_TRUE; |
| } |
| |
| static void BrotliEncoderInitState(BrotliEncoderState* s) { |
| s->params.mode = BROTLI_DEFAULT_MODE; |
| s->params.quality = BROTLI_DEFAULT_QUALITY; |
| s->params.lgwin = BROTLI_DEFAULT_WINDOW; |
| s->params.lgblock = 0; |
| |
| s->input_pos_ = 0; |
| s->num_commands_ = 0; |
| s->num_literals_ = 0; |
| s->last_insert_len_ = 0; |
| s->last_flush_pos_ = 0; |
| s->last_processed_pos_ = 0; |
| s->prev_byte_ = 0; |
| s->prev_byte2_ = 0; |
| s->storage_size_ = 0; |
| s->storage_ = 0; |
| s->large_table_ = NULL; |
| s->large_table_size_ = 0; |
| s->cmd_code_numbits_ = 0; |
| s->command_buf_ = NULL; |
| s->literal_buf_ = NULL; |
| s->next_out_ = NULL; |
| s->available_out_ = 0; |
| s->total_out_ = 0; |
| s->stream_state_ = BROTLI_STREAM_PROCESSING; |
| s->is_last_block_emitted_ = BROTLI_FALSE; |
| s->is_initialized_ = BROTLI_FALSE; |
| |
| InitHashers(&s->hashers_); |
| |
| RingBufferInit(&s->ringbuffer_); |
| |
| s->commands_ = 0; |
| s->cmd_alloc_size_ = 0; |
| |
| /* Initialize distance cache. */ |
| s->dist_cache_[0] = 4; |
| s->dist_cache_[1] = 11; |
| s->dist_cache_[2] = 15; |
| s->dist_cache_[3] = 16; |
| /* Save the state of the distance cache in case we need to restore it for |
| emitting an uncompressed block. */ |
| memcpy(s->saved_dist_cache_, s->dist_cache_, sizeof(s->dist_cache_)); |
| } |
| |
| BrotliEncoderState* BrotliEncoderCreateInstance(brotli_alloc_func alloc_func, |
| brotli_free_func free_func, |
| void* opaque) { |
| BrotliEncoderState* state = 0; |
| if (!alloc_func && !free_func) { |
| state = (BrotliEncoderState*)malloc(sizeof(BrotliEncoderState)); |
| } else if (alloc_func && free_func) { |
| state = (BrotliEncoderState*)alloc_func(opaque, sizeof(BrotliEncoderState)); |
| } |
| if (state == 0) { |
| /* BROTLI_DUMP(); */ |
| return 0; |
| } |
| BrotliInitMemoryManager( |
| &state->memory_manager_, alloc_func, free_func, opaque); |
| BrotliEncoderInitState(state); |
| return state; |
| } |
| |
| static void BrotliEncoderCleanupState(BrotliEncoderState* s) { |
| MemoryManager* m = &s->memory_manager_; |
| if (BROTLI_IS_OOM(m)) { |
| BrotliWipeOutMemoryManager(m); |
| return; |
| } |
| BROTLI_FREE(m, s->storage_); |
| BROTLI_FREE(m, s->commands_); |
| RingBufferFree(m, &s->ringbuffer_); |
| DestroyHashers(m, &s->hashers_); |
| BROTLI_FREE(m, s->large_table_); |
| BROTLI_FREE(m, s->command_buf_); |
| BROTLI_FREE(m, s->literal_buf_); |
| } |
| |
| /* Deinitializes and frees BrotliEncoderState instance. */ |
| void BrotliEncoderDestroyInstance(BrotliEncoderState* state) { |
| if (!state) { |
| return; |
| } else { |
| MemoryManager* m = &state->memory_manager_; |
| brotli_free_func free_func = m->free_func; |
| void* opaque = m->opaque; |
| BrotliEncoderCleanupState(state); |
| free_func(opaque, state); |
| } |
| } |
| |
| static void CopyInputToRingBuffer(BrotliEncoderState* s, |
| const size_t input_size, |
| const uint8_t* input_buffer) { |
| RingBuffer* ringbuffer_ = &s->ringbuffer_; |
| MemoryManager* m = &s->memory_manager_; |
| if (!EnsureInitialized(s)) return; |
| RingBufferWrite(m, input_buffer, input_size, ringbuffer_); |
| if (BROTLI_IS_OOM(m)) return; |
| s->input_pos_ += input_size; |
| |
| /* TL;DR: If needed, initialize 7 more bytes in the ring buffer to make the |
| hashing not depend on uninitialized data. This makes compression |
| deterministic and it prevents uninitialized memory warnings in Valgrind. |
| Even without erasing, the output would be valid (but nondeterministic). |
| |
| Background information: The compressor stores short (at most 8 bytes) |
| substrings of the input already read in a hash table, and detects |
| repetitions by looking up such substrings in the hash table. If it |
| can find a substring, it checks whether the substring is really there |
| in the ring buffer (or it's just a hash collision). Should the hash |
| table become corrupt, this check makes sure that the output is |
| still valid, albeit the compression ratio would be bad. |
| |
| The compressor populates the hash table from the ring buffer as it's |
| reading new bytes from the input. However, at the last few indexes of |
| the ring buffer, there are not enough bytes to build full-length |
| substrings from. Since the hash table always contains full-length |
| substrings, we erase with dummy 0s here to make sure that those |
| substrings will contain 0s at the end instead of uninitialized |
| data. |
| |
| Please note that erasing is not necessary (because the |
| memory region is already initialized since he ring buffer |
| has a `tail' that holds a copy of the beginning,) so we |
| skip erasing if we have already gone around at least once in |
| the ring buffer. |
| |
| Only clear during the first round of ringbuffer writes. On |
| subsequent rounds data in the ringbuffer would be affected. */ |
| if (ringbuffer_->pos_ <= ringbuffer_->mask_) { |
| /* This is the first time when the ring buffer is being written. |
| We clear 7 bytes just after the bytes that have been copied from |
| the input buffer. |
| |
| The ringbuffer has a "tail" that holds a copy of the beginning, |
| but only once the ring buffer has been fully written once, i.e., |
| pos <= mask. For the first time, we need to write values |
| in this tail (where index may be larger than mask), so that |
| we have exactly defined behavior and don't read un-initialized |
| memory. Due to performance reasons, hashing reads data using a |
| LOAD64, which can go 7 bytes beyond the bytes written in the |
| ringbuffer. */ |
| memset(ringbuffer_->buffer_ + ringbuffer_->pos_, 0, 7); |
| } |
| } |
| |
| void BrotliEncoderSetCustomDictionary(BrotliEncoderState* s, size_t size, |
| const uint8_t* dict) { |
| size_t max_dict_size = MaxBackwardLimit(s->params.lgwin); |
| size_t dict_size = size; |
| MemoryManager* m = &s->memory_manager_; |
| |
| if (!EnsureInitialized(s)) return; |
| |
| if (dict_size == 0 || |
| s->params.quality == FAST_ONE_PASS_COMPRESSION_QUALITY || |
| s->params.quality == FAST_TWO_PASS_COMPRESSION_QUALITY) { |
| return; |
| } |
| if (size > max_dict_size) { |
| dict += size - max_dict_size; |
| dict_size = max_dict_size; |
| } |
| CopyInputToRingBuffer(s, dict_size, dict); |
| s->last_flush_pos_ = dict_size; |
| s->last_processed_pos_ = dict_size; |
| if (dict_size > 0) { |
| s->prev_byte_ = dict[dict_size - 1]; |
| } |
| if (dict_size > 1) { |
| s->prev_byte2_ = dict[dict_size - 2]; |
| } |
| HashersPrependCustomDictionary(m, &s->hashers_, &s->params, dict_size, dict); |
| if (BROTLI_IS_OOM(m)) return; |
| } |
| |
| /* Marks all input as processed. |
| Returns true if position wrapping occurs. */ |
| static BROTLI_BOOL UpdateLastProcessedPos(BrotliEncoderState* s) { |
| uint32_t wrapped_last_processed_pos = WrapPosition(s->last_processed_pos_); |
| uint32_t wrapped_input_pos = WrapPosition(s->input_pos_); |
| s->last_processed_pos_ = s->input_pos_; |
| return TO_BROTLI_BOOL(wrapped_input_pos < wrapped_last_processed_pos); |
| } |
| |
| static BROTLI_BOOL EncodeData( |
| BrotliEncoderState* s, const BROTLI_BOOL is_last, |
| const BROTLI_BOOL force_flush, size_t* out_size, uint8_t** output) { |
| const uint64_t delta = UnprocessedInputSize(s); |
| const uint32_t bytes = (uint32_t)delta; |
| const uint32_t wrapped_last_processed_pos = |
| WrapPosition(s->last_processed_pos_); |
| uint8_t* data; |
| uint32_t mask; |
| MemoryManager* m = &s->memory_manager_; |
| |
| if (!EnsureInitialized(s)) return BROTLI_FALSE; |
| data = s->ringbuffer_.buffer_; |
| mask = s->ringbuffer_.mask_; |
| |
| /* Adding more blocks after "last" block is forbidden. */ |
| if (s->is_last_block_emitted_) return BROTLI_FALSE; |
| if (is_last) s->is_last_block_emitted_ = BROTLI_TRUE; |
| |
| if (delta > InputBlockSize(s)) { |
| return BROTLI_FALSE; |
| } |
| if (s->params.quality == FAST_TWO_PASS_COMPRESSION_QUALITY && |
| !s->command_buf_) { |
| s->command_buf_ = |
| BROTLI_ALLOC(m, uint32_t, kCompressFragmentTwoPassBlockSize); |
| s->literal_buf_ = |
| BROTLI_ALLOC(m, uint8_t, kCompressFragmentTwoPassBlockSize); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| } |
| |
| if (s->params.quality == FAST_ONE_PASS_COMPRESSION_QUALITY || |
| s->params.quality == FAST_TWO_PASS_COMPRESSION_QUALITY) { |
| uint8_t* storage; |
| size_t storage_ix = s->last_byte_bits_; |
| size_t table_size; |
| int* table; |
| |
| if (delta == 0 && !is_last) { |
| /* We have no new input data and we don't have to finish the stream, so |
| nothing to do. */ |
| *out_size = 0; |
| return BROTLI_TRUE; |
| } |
| storage = GetBrotliStorage(s, 2 * bytes + 502); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| storage[0] = s->last_byte_; |
| table = GetHashTable(s, s->params.quality, bytes, &table_size); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| if (s->params.quality == FAST_ONE_PASS_COMPRESSION_QUALITY) { |
| BrotliCompressFragmentFast( |
| m, &data[wrapped_last_processed_pos & mask], |
| bytes, is_last, |
| table, table_size, |
| s->cmd_depths_, s->cmd_bits_, |
| &s->cmd_code_numbits_, s->cmd_code_, |
| &storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| } else { |
| BrotliCompressFragmentTwoPass( |
| m, &data[wrapped_last_processed_pos & mask], |
| bytes, is_last, |
| s->command_buf_, s->literal_buf_, |
| table, table_size, |
| &storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| } |
| s->last_byte_ = storage[storage_ix >> 3]; |
| s->last_byte_bits_ = storage_ix & 7u; |
| UpdateLastProcessedPos(s); |
| *output = &storage[0]; |
| *out_size = storage_ix >> 3; |
| return BROTLI_TRUE; |
| } |
| |
| { |
| /* Theoretical max number of commands is 1 per 2 bytes. */ |
| size_t newsize = s->num_commands_ + bytes / 2 + 1; |
| if (newsize > s->cmd_alloc_size_) { |
| Command* new_commands; |
| /* Reserve a bit more memory to allow merging with a next block |
| without realloc: that would impact speed. */ |
| newsize += (bytes / 4) + 16; |
| s->cmd_alloc_size_ = newsize; |
| new_commands = BROTLI_ALLOC(m, Command, newsize); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| if (s->commands_) { |
| memcpy(new_commands, s->commands_, sizeof(Command) * s->num_commands_); |
| BROTLI_FREE(m, s->commands_); |
| } |
| s->commands_ = new_commands; |
| } |
| } |
| |
| BrotliCreateBackwardReferences(m, bytes, wrapped_last_processed_pos, |
| is_last, data, mask, |
| &s->params, |
| &s->hashers_, |
| s->dist_cache_, |
| &s->last_insert_len_, |
| &s->commands_[s->num_commands_], |
| &s->num_commands_, |
| &s->num_literals_); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| |
| { |
| const size_t max_length = MaxMetablockSize(&s->params); |
| const size_t max_literals = max_length / 8; |
| const size_t max_commands = max_length / 8; |
| const size_t processed_bytes = (size_t)(s->input_pos_ - s->last_flush_pos_); |
| /* If maximal possible additional block doesn't fit metablock, flush now. */ |
| /* TODO: Postpone decision until next block arrives? */ |
| const BROTLI_BOOL next_input_fits_metablock = TO_BROTLI_BOOL( |
| processed_bytes + InputBlockSize(s) <= max_length); |
| /* If block splitting is not used, then flush as soon as there is some |
| amount of commands / literals produced. */ |
| const BROTLI_BOOL should_flush = TO_BROTLI_BOOL( |
| s->params.quality < MIN_QUALITY_FOR_BLOCK_SPLIT && |
| s->num_literals_ + s->num_commands_ >= MAX_NUM_DELAYED_SYMBOLS); |
| if (!is_last && !force_flush && !should_flush && |
| next_input_fits_metablock && |
| s->num_literals_ < max_literals && |
| s->num_commands_ < max_commands) { |
| /* Merge with next input block. Everything will happen later. */ |
| if (UpdateLastProcessedPos(s)) { |
| HashersReset(&s->hashers_, ChooseHasher(&s->params)); |
| } |
| *out_size = 0; |
| return BROTLI_TRUE; |
| } |
| } |
| |
| /* Create the last insert-only command. */ |
| if (s->last_insert_len_ > 0) { |
| InitInsertCommand(&s->commands_[s->num_commands_++], s->last_insert_len_); |
| s->num_literals_ += s->last_insert_len_; |
| s->last_insert_len_ = 0; |
| } |
| |
| if (!is_last && s->input_pos_ == s->last_flush_pos_) { |
| /* We have no new input data and we don't have to finish the stream, so |
| nothing to do. */ |
| *out_size = 0; |
| return BROTLI_TRUE; |
| } |
| assert(s->input_pos_ >= s->last_flush_pos_); |
| assert(s->input_pos_ > s->last_flush_pos_ || is_last); |
| assert(s->input_pos_ - s->last_flush_pos_ <= 1u << 24); |
| { |
| const uint32_t metablock_size = |
| (uint32_t)(s->input_pos_ - s->last_flush_pos_); |
| uint8_t* storage = GetBrotliStorage(s, 2 * metablock_size + 502); |
| size_t storage_ix = s->last_byte_bits_; |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| storage[0] = s->last_byte_; |
| WriteMetaBlockInternal( |
| m, data, mask, s->last_flush_pos_, metablock_size, is_last, |
| &s->params, s->prev_byte_, s->prev_byte2_, |
| s->num_literals_, s->num_commands_, s->commands_, s->saved_dist_cache_, |
| s->dist_cache_, &storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| s->last_byte_ = storage[storage_ix >> 3]; |
| s->last_byte_bits_ = storage_ix & 7u; |
| s->last_flush_pos_ = s->input_pos_; |
| if (UpdateLastProcessedPos(s)) { |
| HashersReset(&s->hashers_, ChooseHasher(&s->params)); |
| } |
| if (s->last_flush_pos_ > 0) { |
| s->prev_byte_ = data[((uint32_t)s->last_flush_pos_ - 1) & mask]; |
| } |
| if (s->last_flush_pos_ > 1) { |
| s->prev_byte2_ = data[(uint32_t)(s->last_flush_pos_ - 2) & mask]; |
| } |
| s->num_commands_ = 0; |
| s->num_literals_ = 0; |
| /* Save the state of the distance cache in case we need to restore it for |
| emitting an uncompressed block. */ |
| memcpy(s->saved_dist_cache_, s->dist_cache_, sizeof(s->dist_cache_)); |
| *output = &storage[0]; |
| *out_size = storage_ix >> 3; |
| return BROTLI_TRUE; |
| } |
| } |
| |
| /* Dumps remaining output bits and metadata header to |header|. |
| Returns number of produced bytes. |
| REQUIRED: |header| should be 8-byte aligned and at least 16 bytes long. |
| REQUIRED: |block_size| <= (1 << 24). */ |
| static size_t WriteMetadataHeader( |
| BrotliEncoderState* s, const size_t block_size, uint8_t* header) { |
| size_t storage_ix; |
| storage_ix = s->last_byte_bits_; |
| header[0] = s->last_byte_; |
| s->last_byte_ = 0; |
| s->last_byte_bits_ = 0; |
| |
| BrotliWriteBits(1, 0, &storage_ix, header); |
| BrotliWriteBits(2, 3, &storage_ix, header); |
| BrotliWriteBits(1, 0, &storage_ix, header); |
| if (block_size == 0) { |
| BrotliWriteBits(2, 0, &storage_ix, header); |
| } else { |
| uint32_t nbits = (block_size == 1) ? 0 : |
| (Log2FloorNonZero((uint32_t)block_size - 1) + 1); |
| uint32_t nbytes = (nbits + 7) / 8; |
| BrotliWriteBits(2, nbytes, &storage_ix, header); |
| BrotliWriteBits(8 * nbytes, block_size - 1, &storage_ix, header); |
| } |
| return (storage_ix + 7u) >> 3; |
| } |
| |
| static BROTLI_BOOL BrotliCompressBufferQuality10( |
| int lgwin, size_t input_size, const uint8_t* input_buffer, |
| size_t* encoded_size, uint8_t* encoded_buffer) { |
| MemoryManager memory_manager; |
| MemoryManager* m = &memory_manager; |
| |
| const size_t mask = BROTLI_SIZE_MAX >> 1; |
| const size_t max_backward_limit = MaxBackwardLimit(lgwin); |
| int dist_cache[4] = { 4, 11, 15, 16 }; |
| int saved_dist_cache[4] = { 4, 11, 15, 16 }; |
| BROTLI_BOOL ok = BROTLI_TRUE; |
| const size_t max_out_size = *encoded_size; |
| size_t total_out_size = 0; |
| uint8_t last_byte; |
| uint8_t last_byte_bits; |
| H10* hasher; |
| |
| const size_t hasher_eff_size = |
| BROTLI_MIN(size_t, input_size, max_backward_limit + 16); |
| |
| BrotliEncoderParams params; |
| |
| const int lgmetablock = BROTLI_MIN(int, 24, lgwin + 1); |
| size_t max_block_size; |
| const size_t max_metablock_size = (size_t)1 << lgmetablock; |
| const size_t max_literals_per_metablock = max_metablock_size / 8; |
| const size_t max_commands_per_metablock = max_metablock_size / 8; |
| size_t metablock_start = 0; |
| uint8_t prev_byte = 0; |
| uint8_t prev_byte2 = 0; |
| |
| params.mode = BROTLI_DEFAULT_MODE; |
| params.quality = 10; |
| params.lgwin = lgwin; |
| params.lgblock = 0; |
| SanitizeParams(¶ms); |
| params.lgblock = ComputeLgBlock(¶ms); |
| max_block_size = (size_t)1 << params.lgblock; |
| |
| BrotliInitMemoryManager(m, 0, 0, 0); |
| |
| assert(input_size <= mask + 1); |
| EncodeWindowBits(lgwin, &last_byte, &last_byte_bits); |
| hasher = BROTLI_ALLOC(m, H10, 1); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| InitializeH10(hasher); |
| InitH10(m, hasher, input_buffer, ¶ms, 0, hasher_eff_size, 1); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| |
| while (ok && metablock_start < input_size) { |
| const size_t metablock_end = |
| BROTLI_MIN(size_t, input_size, metablock_start + max_metablock_size); |
| const size_t expected_num_commands = |
| (metablock_end - metablock_start) / 12 + 16; |
| Command* commands = 0; |
| size_t num_commands = 0; |
| size_t last_insert_len = 0; |
| size_t num_literals = 0; |
| size_t metablock_size = 0; |
| size_t cmd_alloc_size = 0; |
| BROTLI_BOOL is_last; |
| uint8_t* storage; |
| size_t storage_ix; |
| |
| size_t block_start; |
| for (block_start = metablock_start; block_start < metablock_end; ) { |
| size_t block_size = |
| BROTLI_MIN(size_t, metablock_end - block_start, max_block_size); |
| ZopfliNode* nodes = BROTLI_ALLOC(m, ZopfliNode, block_size + 1); |
| size_t path_size; |
| size_t new_cmd_alloc_size; |
| if (BROTLI_IS_OOM(m)) goto oom; |
| BrotliInitZopfliNodes(nodes, block_size + 1); |
| StitchToPreviousBlockH10(hasher, block_size, block_start, |
| input_buffer, mask); |
| path_size = BrotliZopfliComputeShortestPath( |
| m, block_size, block_start, input_buffer, mask, ¶ms, |
| max_backward_limit, dist_cache, hasher, nodes); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| /* We allocate a command buffer in the first iteration of this loop that |
| will be likely big enough for the whole metablock, so that for most |
| inputs we will not have to reallocate in later iterations. We do the |
| allocation here and not before the loop, because if the input is small, |
| this will be allocated after the zopfli cost model is freed, so this |
| will not increase peak memory usage. |
| TODO: If the first allocation is too small, increase command |
| buffer size exponentially. */ |
| new_cmd_alloc_size = BROTLI_MAX(size_t, expected_num_commands, |
| num_commands + path_size + 1); |
| if (cmd_alloc_size != new_cmd_alloc_size) { |
| Command* new_commands = BROTLI_ALLOC(m, Command, new_cmd_alloc_size); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| cmd_alloc_size = new_cmd_alloc_size; |
| if (commands) { |
| memcpy(new_commands, commands, sizeof(Command) * num_commands); |
| BROTLI_FREE(m, commands); |
| } |
| commands = new_commands; |
| } |
| BrotliZopfliCreateCommands(block_size, block_start, max_backward_limit, |
| &nodes[0], dist_cache, &last_insert_len, |
| &commands[num_commands], &num_literals); |
| num_commands += path_size; |
| block_start += block_size; |
| metablock_size += block_size; |
| BROTLI_FREE(m, nodes); |
| if (num_literals > max_literals_per_metablock || |
| num_commands > max_commands_per_metablock) { |
| break; |
| } |
| } |
| |
| if (last_insert_len > 0) { |
| InitInsertCommand(&commands[num_commands++], last_insert_len); |
| num_literals += last_insert_len; |
| } |
| |
| is_last = TO_BROTLI_BOOL(metablock_start + metablock_size == input_size); |
| storage = NULL; |
| storage_ix = last_byte_bits; |
| |
| if (metablock_size == 0) { |
| /* Write the ISLAST and ISEMPTY bits. */ |
| storage = BROTLI_ALLOC(m, uint8_t, 16); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| storage[0] = last_byte; |
| BrotliWriteBits(2, 3, &storage_ix, storage); |
| storage_ix = (storage_ix + 7u) & ~7u; |
| } else if (!ShouldCompress(input_buffer, mask, metablock_start, |
| metablock_size, num_literals, num_commands)) { |
| /* Restore the distance cache, as its last update by |
| CreateBackwardReferences is now unused. */ |
| memcpy(dist_cache, saved_dist_cache, 4 * sizeof(dist_cache[0])); |
| storage = BROTLI_ALLOC(m, uint8_t, metablock_size + 16); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| storage[0] = last_byte; |
| BrotliStoreUncompressedMetaBlock(is_last, input_buffer, |
| metablock_start, mask, metablock_size, |
| &storage_ix, storage); |
| } else { |
| uint32_t num_direct_distance_codes = 0; |
| uint32_t distance_postfix_bits = 0; |
| ContextType literal_context_mode = CONTEXT_UTF8; |
| MetaBlockSplit mb; |
| InitMetaBlockSplit(&mb); |
| if (!BrotliIsMostlyUTF8(input_buffer, metablock_start, mask, |
| metablock_size, kMinUTF8Ratio)) { |
| literal_context_mode = CONTEXT_SIGNED; |
| } |
| BrotliBuildMetaBlock(m, input_buffer, metablock_start, mask, ¶ms, |
| prev_byte, prev_byte2, |
| commands, num_commands, |
| literal_context_mode, |
| &mb); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| BrotliOptimizeHistograms(num_direct_distance_codes, |
| distance_postfix_bits, |
| &mb); |
| storage = BROTLI_ALLOC(m, uint8_t, 2 * metablock_size + 502); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| storage[0] = last_byte; |
| BrotliStoreMetaBlock(m, input_buffer, metablock_start, metablock_size, |
| mask, prev_byte, prev_byte2, |
| is_last, |
| num_direct_distance_codes, |
| distance_postfix_bits, |
| literal_context_mode, |
| commands, num_commands, |
| &mb, |
| &storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) goto oom; |
| if (metablock_size + 4 < (storage_ix >> 3)) { |
| /* Restore the distance cache and last byte. */ |
| memcpy(dist_cache, saved_dist_cache, 4 * sizeof(dist_cache[0])); |
| storage[0] = last_byte; |
| storage_ix = last_byte_bits; |
| BrotliStoreUncompressedMetaBlock(is_last, input_buffer, |
| metablock_start, mask, |
| metablock_size, &storage_ix, storage); |
| } |
| DestroyMetaBlockSplit(m, &mb); |
| } |
| last_byte = storage[storage_ix >> 3]; |
| last_byte_bits = storage_ix & 7u; |
| metablock_start += metablock_size; |
| prev_byte = input_buffer[metablock_start - 1]; |
| prev_byte2 = input_buffer[metablock_start - 2]; |
| /* Save the state of the distance cache in case we need to restore it for |
| emitting an uncompressed block. */ |
| memcpy(saved_dist_cache, dist_cache, 4 * sizeof(dist_cache[0])); |
| |
| { |
| const size_t out_size = storage_ix >> 3; |
| total_out_size += out_size; |
| if (total_out_size <= max_out_size) { |
| memcpy(encoded_buffer, storage, out_size); |
| encoded_buffer += out_size; |
| } else { |
| ok = BROTLI_FALSE; |
| } |
| } |
| BROTLI_FREE(m, storage); |
| BROTLI_FREE(m, commands); |
| } |
| |
| *encoded_size = total_out_size; |
| CleanupH10(m, hasher); |
| BROTLI_FREE(m, hasher); |
| return ok; |
| |
| oom: |
| BrotliWipeOutMemoryManager(m); |
| return BROTLI_FALSE; |
| } |
| |
| size_t BrotliEncoderMaxCompressedSize(size_t input_size) { |
| /* [window bits / empty metadata] + N * [uncompressed] + [last empty] */ |
| size_t num_large_blocks = input_size >> 24; |
| size_t tail = input_size - (num_large_blocks << 24); |
| size_t tail_overhead = (tail > (1 << 20)) ? 4 : 3; |
| size_t overhead = 2 + (4 * num_large_blocks) + tail_overhead + 1; |
| size_t result = input_size + overhead; |
| if (input_size == 0) return 1; |
| return (result < input_size) ? 0 : result; |
| } |
| |
| /* Wraps data to uncompressed brotli stream with minimal window size. |
| |output| should point at region with at least BrotliEncoderMaxCompressedSize |
| addressable bytes. |
| Returns the length of stream. */ |
| static size_t MakeUncompressedStream( |
| const uint8_t* input, size_t input_size, uint8_t* output) { |
| size_t size = input_size; |
| size_t result = 0; |
| size_t offset = 0; |
| if (input_size == 0) { |
| output[0] = 6; |
| return 1; |
| } |
| output[result++] = 0x21; /* window bits = 10, is_last = false */ |
| output[result++] = 0x03; /* empty metadata, padding */ |
| while (size > 0) { |
| uint32_t nibbles = 0; |
| uint32_t chunk_size; |
| uint32_t bits; |
| chunk_size = (size > (1u << 24)) ? (1u << 24) : (uint32_t)size; |
| if (chunk_size > (1u << 16)) nibbles = (chunk_size > (1u << 20)) ? 2 : 1; |
| bits = |
| (nibbles << 1) | ((chunk_size - 1) << 3) | (1u << (19 + 4 * nibbles)); |
| output[result++] = (uint8_t)bits; |
| output[result++] = (uint8_t)(bits >> 8); |
| output[result++] = (uint8_t)(bits >> 16); |
| if (nibbles == 2) output[result++] = (uint8_t)(bits >> 24); |
| memcpy(&output[result], &input[offset], chunk_size); |
| result += chunk_size; |
| offset += chunk_size; |
| size -= chunk_size; |
| } |
| output[result++] = 3; |
| return result; |
| } |
| |
| BROTLI_BOOL BrotliEncoderCompress( |
| int quality, int lgwin, BrotliEncoderMode mode, size_t input_size, |
| const uint8_t* input_buffer, size_t* encoded_size, |
| uint8_t* encoded_buffer) { |
| BrotliEncoderState* s; |
| size_t out_size = *encoded_size; |
| const uint8_t* input_start = input_buffer; |
| uint8_t* output_start = encoded_buffer; |
| size_t max_out_size = BrotliEncoderMaxCompressedSize(input_size); |
| if (out_size == 0) { |
| /* Output buffer needs at least one byte. */ |
| return BROTLI_FALSE; |
| } |
| if (input_size == 0) { |
| /* Handle the special case of empty input. */ |
| *encoded_size = 1; |
| *encoded_buffer = 6; |
| return BROTLI_TRUE; |
| } |
| if (quality == 10) { |
| /* TODO: Implement this direct path for all quality levels. */ |
| const int lg_win = BROTLI_MIN(int, kBrotliMaxWindowBits, |
| BROTLI_MAX(int, 16, lgwin)); |
| int ok = BrotliCompressBufferQuality10(lg_win, input_size, input_buffer, |
| encoded_size, encoded_buffer); |
| if (!ok || (max_out_size && *encoded_size > max_out_size)) { |
| goto fallback; |
| } |
| return BROTLI_TRUE; |
| } |
| |
| s = BrotliEncoderCreateInstance(0, 0, 0); |
| if (!s) { |
| return BROTLI_FALSE; |
| } else { |
| size_t available_in = input_size; |
| const uint8_t* next_in = input_buffer; |
| size_t available_out = *encoded_size; |
| uint8_t* next_out = encoded_buffer; |
| size_t total_out = 0; |
| BROTLI_BOOL result = BROTLI_FALSE; |
| BrotliEncoderSetParameter(s, BROTLI_PARAM_QUALITY, (uint32_t)quality); |
| BrotliEncoderSetParameter(s, BROTLI_PARAM_LGWIN, (uint32_t)lgwin); |
| BrotliEncoderSetParameter(s, BROTLI_PARAM_MODE, (uint32_t)mode); |
| result = BrotliEncoderCompressStream(s, BROTLI_OPERATION_FINISH, |
| &available_in, &next_in, &available_out, &next_out, &total_out); |
| if (!BrotliEncoderIsFinished(s)) result = 0; |
| *encoded_size = total_out; |
| BrotliEncoderDestroyInstance(s); |
| if (!result || (max_out_size && *encoded_size > max_out_size)) { |
| goto fallback; |
| } |
| return BROTLI_TRUE; |
| } |
| fallback: |
| *encoded_size = 0; |
| if (!max_out_size) return BROTLI_FALSE; |
| if (out_size >= max_out_size) { |
| *encoded_size = |
| MakeUncompressedStream(input_start, input_size, output_start); |
| return BROTLI_TRUE; |
| } |
| return BROTLI_FALSE; |
| } |
| |
| static void InjectBytePaddingBlock(BrotliEncoderState* s) { |
| uint32_t seal = s->last_byte_; |
| size_t seal_bits = s->last_byte_bits_; |
| uint8_t* destination; |
| s->last_byte_ = 0; |
| s->last_byte_bits_ = 0; |
| /* is_last = 0, data_nibbles = 11, reseved = 0, meta_nibbles = 00 */ |
| seal |= 0x6u << seal_bits; |
| seal_bits += 6; |
| /* If we have already created storage, then append to it. |
| Storage is valid until next block is being compressed. */ |
| if (s->next_out_) { |
| destination = s->next_out_ + s->available_out_; |
| } else { |
| destination = s->tiny_buf_.u8; |
| s->next_out_ = destination; |
| } |
| destination[0] = (uint8_t)seal; |
| if (seal_bits > 8) destination[1] = (uint8_t)(seal >> 8); |
| s->available_out_ += (seal_bits + 7) >> 3; |
| } |
| |
| /* Injects padding bits or pushes compressed data to output. |
| Returns false if nothing is done. */ |
| static BROTLI_BOOL InjectFlushOrPushOutput(BrotliEncoderState* s, |
| size_t* available_out, uint8_t** next_out, size_t* total_out) { |
| if (s->stream_state_ == BROTLI_STREAM_FLUSH_REQUESTED && |
| s->last_byte_bits_ != 0) { |
| InjectBytePaddingBlock(s); |
| return BROTLI_TRUE; |
| } |
| |
| if (s->available_out_ != 0 && *available_out != 0) { |
| size_t copy_output_size = |
| BROTLI_MIN(size_t, s->available_out_, *available_out); |
| memcpy(*next_out, s->next_out_, copy_output_size); |
| *next_out += copy_output_size; |
| *available_out -= copy_output_size; |
| s->next_out_ += copy_output_size; |
| s->available_out_ -= copy_output_size; |
| s->total_out_ += copy_output_size; |
| if (total_out) *total_out = s->total_out_; |
| return BROTLI_TRUE; |
| } |
| |
| return BROTLI_FALSE; |
| } |
| |
| static BROTLI_BOOL BrotliEncoderCompressStreamFast( |
| BrotliEncoderState* s, BrotliEncoderOperation op, size_t* available_in, |
| const uint8_t** next_in, size_t* available_out, uint8_t** next_out, |
| size_t* total_out) { |
| const size_t block_size_limit = (size_t)1 << s->params.lgwin; |
| const size_t buf_size = BROTLI_MIN(size_t, kCompressFragmentTwoPassBlockSize, |
| BROTLI_MIN(size_t, *available_in, block_size_limit)); |
| uint32_t* tmp_command_buf = NULL; |
| uint32_t* command_buf = NULL; |
| uint8_t* tmp_literal_buf = NULL; |
| uint8_t* literal_buf = NULL; |
| MemoryManager* m = &s->memory_manager_; |
| if (s->params.quality != FAST_ONE_PASS_COMPRESSION_QUALITY && |
| s->params.quality != FAST_TWO_PASS_COMPRESSION_QUALITY) { |
| return BROTLI_FALSE; |
| } |
| if (s->params.quality == FAST_TWO_PASS_COMPRESSION_QUALITY) { |
| if (!s->command_buf_ && buf_size == kCompressFragmentTwoPassBlockSize) { |
| s->command_buf_ = |
| BROTLI_ALLOC(m, uint32_t, kCompressFragmentTwoPassBlockSize); |
| s->literal_buf_ = |
| BROTLI_ALLOC(m, uint8_t, kCompressFragmentTwoPassBlockSize); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| } |
| if (s->command_buf_) { |
| command_buf = s->command_buf_; |
| literal_buf = s->literal_buf_; |
| } else { |
| tmp_command_buf = BROTLI_ALLOC(m, uint32_t, buf_size); |
| tmp_literal_buf = BROTLI_ALLOC(m, uint8_t, buf_size); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| command_buf = tmp_command_buf; |
| literal_buf = tmp_literal_buf; |
| } |
| } |
| |
| while (BROTLI_TRUE) { |
| if (InjectFlushOrPushOutput(s, available_out, next_out, total_out)) { |
| continue; |
| } |
| |
| /* Compress block only when internal output buffer is empty, stream is not |
| finished, there is no pending flush request, and there is either |
| additional input or pending operation. */ |
| if (s->available_out_ == 0 && |
| s->stream_state_ == BROTLI_STREAM_PROCESSING && |
| (*available_in != 0 || op != BROTLI_OPERATION_PROCESS)) { |
| size_t block_size = BROTLI_MIN(size_t, block_size_limit, *available_in); |
| BROTLI_BOOL is_last = |
| (*available_in == block_size) && (op == BROTLI_OPERATION_FINISH); |
| BROTLI_BOOL force_flush = |
| (*available_in == block_size) && (op == BROTLI_OPERATION_FLUSH); |
| size_t max_out_size = 2 * block_size + 502; |
| BROTLI_BOOL inplace = BROTLI_TRUE; |
| uint8_t* storage = NULL; |
| size_t storage_ix = s->last_byte_bits_; |
| size_t table_size; |
| int* table; |
| |
| if (force_flush && block_size == 0) { |
| s->stream_state_ = BROTLI_STREAM_FLUSH_REQUESTED; |
| continue; |
| } |
| if (max_out_size <= *available_out) { |
| storage = *next_out; |
| } else { |
| inplace = BROTLI_FALSE; |
| storage = GetBrotliStorage(s, max_out_size); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| } |
| storage[0] = s->last_byte_; |
| table = GetHashTable(s, s->params.quality, block_size, &table_size); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| |
| if (s->params.quality == FAST_ONE_PASS_COMPRESSION_QUALITY) { |
| BrotliCompressFragmentFast(m, *next_in, block_size, is_last, table, |
| table_size, s->cmd_depths_, s->cmd_bits_, &s->cmd_code_numbits_, |
| s->cmd_code_, &storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| } else { |
| BrotliCompressFragmentTwoPass(m, *next_in, block_size, is_last, |
| command_buf, literal_buf, table, table_size, |
| &storage_ix, storage); |
| if (BROTLI_IS_OOM(m)) return BROTLI_FALSE; |
| } |
| *next_in += block_size; |
| *available_in -= block_size; |
| if (inplace) { |
| size_t out_bytes = storage_ix >> 3; |
| assert(out_bytes <= *available_out); |
| assert((storage_ix & 7) == 0 || out_bytes < *available_out); |
| *next_out += out_bytes; |
| *available_out -= out_bytes; |
| s->total_out_ += out_bytes; |
| if (total_out) *total_out = s->total_out_; |
| } else { |
| size_t out_bytes = storage_ix >> 3; |
| s->next_out_ = storage; |
| s->available_out_ = out_bytes; |
| } |
| s->last_byte_ = storage[storage_ix >> 3]; |
| s->last_byte_bits_ = storage_ix & 7u; |
| |
| if (force_flush) s->stream_state_ = BROTLI_STREAM_FLUSH_REQUESTED; |
| if (is_last) s->stream_state_ = BROTLI_STREAM_FINISHED; |
| continue; |
| } |
| break; |
| } |
| BROTLI_FREE(m, tmp_command_buf); |
| BROTLI_FREE(m, tmp_literal_buf); |
| if (s->stream_state_ == BROTLI_STREAM_FLUSH_REQUESTED && |
| s->available_out_ == 0) { |
| s->stream_state_ = BROTLI_STREAM_PROCESSING; |
| s->next_out_ = 0; |
| } |
| return BROTLI_TRUE; |
| } |
| |
| static BROTLI_BOOL ProcessMetadata( |
| BrotliEncoderState* s, size_t* available_in, const uint8_t** next_in, |
| size_t* available_out, uint8_t** next_out, size_t* total_out) { |
| if (*available_in > (1u << 24)) return BROTLI_FALSE; |
| /* Switch to metadata block workflow, if required. */ |
| if (s->stream_state_ == BROTLI_STREAM_PROCESSING) { |
| s->remaining_metadata_bytes_ = (uint32_t)*available_in; |
| s->stream_state_ = BROTLI_STREAM_METADATA_HEAD; |
| } |
| if (s->stream_state_ != BROTLI_STREAM_METADATA_HEAD && |
| s->stream_state_ != BROTLI_STREAM_METADATA_BODY) { |
| return BROTLI_FALSE; |
| } |
| |
| while (BROTLI_TRUE) { |
| if (InjectFlushOrPushOutput(s, available_out, next_out, total_out)) { |
| continue; |
| } |
| if (s->available_out_ != 0) break; |
| |
| if (s->input_pos_ != s->last_flush_pos_) { |
| BROTLI_BOOL result = EncodeData(s, BROTLI_FALSE, BROTLI_TRUE, |
| &s->available_out_, &s->next_out_); |
| if (!result) return BROTLI_FALSE; |
| continue; |
| } |
| |
| if (s->stream_state_ == BROTLI_STREAM_METADATA_HEAD) { |
| s->next_out_ = s->tiny_buf_.u8; |
| s->available_out_ = |
| WriteMetadataHeader(s, s->remaining_metadata_bytes_, s->next_out_); |
| s->stream_state_ = BROTLI_STREAM_METADATA_BODY; |
| continue; |
| } else { |
| /* Exit workflow only when there is no more input and no more output. |
| Otherwise client may continue producing empty metadata blocks. */ |
| if (s->remaining_metadata_bytes_ == 0) { |
| s->remaining_metadata_bytes_ = BROTLI_UINT32_MAX; |
| s->stream_state_ = BROTLI_STREAM_PROCESSING; |
| break; |
| } |
| if (*available_out) { |
| /* Directly copy input to output. */ |
| uint32_t copy = (uint32_t)BROTLI_MIN( |
| size_t, s->remaining_metadata_bytes_, *available_out); |
| memcpy(*next_out, *next_in, copy); |
| *next_in += copy; |
| *available_in -= copy; |
| s->remaining_metadata_bytes_ -= copy; |
| *next_out += copy; |
| *available_out -= copy; |
| } else { |
| /* This guarantees progress in "TakeOutput" workflow. */ |
| uint32_t copy = BROTLI_MIN(uint32_t, s->remaining_metadata_bytes_, 16); |
| s->next_out_ = s->tiny_buf_.u8; |
| memcpy(s->next_out_, *next_in, copy); |
| *next_in += copy; |
| *available_in -= copy; |
| s->remaining_metadata_bytes_ -= copy; |
| s->available_out_ = copy; |
| } |
| continue; |
| } |
| } |
| |
| return BROTLI_TRUE; |
| } |
| |
| BROTLI_BOOL BrotliEncoderCompressStream( |
| BrotliEncoderState* s, BrotliEncoderOperation op, size_t* available_in, |
| const uint8_t** next_in, size_t* available_out,uint8_t** next_out, |
| size_t* total_out) { |
| if (!EnsureInitialized(s)) return BROTLI_FALSE; |
| |
| /* Unfinished metadata block; check requirements. */ |
| if (s->remaining_metadata_bytes_ != BROTLI_UINT32_MAX) { |
| if (*available_in != s->remaining_metadata_bytes_) return BROTLI_FALSE; |
| if (op != BROTLI_OPERATION_EMIT_METADATA) return BROTLI_FALSE; |
| } |
| |
| if (op == BROTLI_OPERATION_EMIT_METADATA) { |
| return ProcessMetadata( |
| s, available_in, next_in, available_out, next_out, total_out); |
| } |
| |
| if (s->stream_state_ == BROTLI_STREAM_METADATA_HEAD || |
| s->stream_state_ == BROTLI_STREAM_METADATA_BODY) { |
| return BROTLI_FALSE; |
| } |
| |
| if (s->stream_state_ != BROTLI_STREAM_PROCESSING && *available_in != 0) { |
| return BROTLI_FALSE; |
| } |
| if (s->params.quality == FAST_ONE_PASS_COMPRESSION_QUALITY || |
| s->params.quality == FAST_TWO_PASS_COMPRESSION_QUALITY) { |
| return BrotliEncoderCompressStreamFast(s, op, available_in, next_in, |
| available_out, next_out, total_out); |
| } |
| while (BROTLI_TRUE) { |
| size_t remaining_block_size = RemainingInputBlockSize(s); |
| |
| if (remaining_block_size != 0 && *available_in != 0) { |
| size_t copy_input_size = |
| BROTLI_MIN(size_t, remaining_block_size, *available_in); |
| CopyInputToRingBuffer(s, copy_input_size, *next_in); |
| *next_in += copy_input_size; |
| *available_in -= copy_input_size; |
| continue; |
| } |
| |
| if (InjectFlushOrPushOutput(s, available_out, next_out, total_out)) { |
| continue; |
| } |
| |
| /* Compress data only when internal outpuf buffer is empty, stream is not |
| finished and there is no pending flush request. */ |
| if (s->available_out_ == 0 && |
| s->stream_state_ == BROTLI_STREAM_PROCESSING) { |
| if (remaining_block_size == 0 || op != BROTLI_OPERATION_PROCESS) { |
| BROTLI_BOOL is_last = TO_BROTLI_BOOL( |
| (*available_in == 0) && op == BROTLI_OPERATION_FINISH); |
| BROTLI_BOOL force_flush = TO_BROTLI_BOOL( |
| (*available_in == 0) && op == BROTLI_OPERATION_FLUSH); |
| BROTLI_BOOL result = EncodeData(s, is_last, force_flush, |
| &s->available_out_, &s->next_out_); |
| if (!result) return BROTLI_FALSE; |
| if (force_flush) s->stream_state_ = BROTLI_STREAM_FLUSH_REQUESTED; |
| if (is_last) s->stream_state_ = BROTLI_STREAM_FINISHED; |
| continue; |
| } |
| } |
| break; |
| } |
| if (s->stream_state_ == BROTLI_STREAM_FLUSH_REQUESTED && |
| s->available_out_ == 0) { |
| s->stream_state_ = BROTLI_STREAM_PROCESSING; |
| s->next_out_ = 0; |
| } |
| return BROTLI_TRUE; |
| } |
| |
| BROTLI_BOOL BrotliEncoderIsFinished(BrotliEncoderState* s) { |
| return TO_BROTLI_BOOL(s->stream_state_ == BROTLI_STREAM_FINISHED && |
| !BrotliEncoderHasMoreOutput(s)); |
| } |
| |
| BROTLI_BOOL BrotliEncoderHasMoreOutput(BrotliEncoderState* s) { |
| return TO_BROTLI_BOOL(s->available_out_ != 0); |
| } |
| |
| const uint8_t* BrotliEncoderTakeOutput(BrotliEncoderState* s, size_t* size) { |
| size_t consumed_size = s->available_out_; |
| uint8_t* result = s->next_out_; |
| if (*size) { |
| consumed_size = BROTLI_MIN(size_t, *size, s->available_out_); |
| } |
| if (consumed_size) { |
| s->next_out_ += consumed_size; |
| s->available_out_ -= consumed_size; |
| s->total_out_ += consumed_size; |
| *size = consumed_size; |
| } else { |
| *size = 0; |
| result = 0; |
| } |
| return result; |
| } |
| |
| uint32_t BrotliEncoderVersion(void) { |
| return BROTLI_VERSION; |
| } |
| |
| |
| /* DEPRECATED >>> */ |
| size_t BrotliEncoderInputBlockSize(BrotliEncoderState* s) { |
| return InputBlockSize(s); |
| } |
| void BrotliEncoderCopyInputToRingBuffer(BrotliEncoderState* s, |
| const size_t input_size, |
| const uint8_t* input_buffer) { |
| CopyInputToRingBuffer(s, input_size, input_buffer); |
| } |
| BROTLI_BOOL BrotliEncoderWriteData( |
| BrotliEncoderState* s, const BROTLI_BOOL is_last, |
| const BROTLI_BOOL force_flush, size_t* out_size, uint8_t** output) { |
| return EncodeData(s, is_last, force_flush, out_size, output); |
| } |
| /* <<< DEPRECATED */ |
| |
| #if defined(__cplusplus) || defined(c_plusplus) |
| } /* extern "C" */ |
| #endif |