docs/SourceBasedCodeCoverage.rst - platform/external/clang - Gitiles

 ==========================
 Source-based Code Coverage
 ==========================

 .. contents::
    :local:

 Introduction
 ============

 This document explains how to use clang's source-based code coverage feature.
 It's called "source-based" because it operates on AST and preprocessor
 information directly. This allows it to generate very precise coverage data.

 Clang ships two other code coverage implementations:

 * :doc:`SanitizerCoverage` - A low-overhead tool meant for use alongside the
   various sanitizers. It can provide up to edge-level coverage.

 * gcov - A GCC-compatible coverage implementation which operates on DebugInfo.

 From this point onwards "code coverage" will refer to the source-based kind.

 The code coverage workflow
 ==========================

 The code coverage workflow consists of three main steps:

 * Compiling with coverage enabled.

 * Running the instrumented program.

 * Creating coverage reports.

 The next few sections work through a complete, copy-'n-paste friendly example
 based on this program:

 .. code-block:: cpp

     % cat <<EOF > foo.cc
     #define BAR(x) ((x) || (x))
     template <typename T> void foo(T x) {
       for (unsigned I = 0; I < 10; ++I) { BAR(I); }
     }
     int main() {
       foo<int>(0);
       foo<float>(0);
       return 0;
     }
     EOF

 Compiling with coverage enabled
 ===============================

 To compile code with coverage enabled, pass ``-fprofile-instr-generate
 -fcoverage-mapping`` to the compiler:

 .. code-block:: console

     # Step 1: Compile with coverage enabled.
     % clang++ -fprofile-instr-generate -fcoverage-mapping foo.cc -o foo

 Note that linking together code with and without coverage instrumentation is
 supported: any uninstrumented code simply won't be accounted for.

 Running the instrumented program
 ================================

 The next step is to run the instrumented program. When the program exits it
 will write a **raw profile** to the path specified by the ``LLVM_PROFILE_FILE``
 environment variable. If that variable does not exist, the profile is written
 to ``default.profraw`` in the current directory of the program. If
 ``LLVM_PROFILE_FILE`` contains a path to a non-existent directory, the missing
 directory structure will be created.  Additionally, the following special
 **pattern strings** are rewritten:

 * "%p" expands out to the process ID.

 * "%h" expands out to the hostname of the machine running the program.

 * "%Nm" expands out to the instrumented binary's signature. When this pattern
   is specified, the runtime creates a pool of N raw profiles which are used for
   on-line profile merging. The runtime takes care of selecting a raw profile
   from the pool, locking it, and updating it before the program exits.  If N is
   not specified (i.e the pattern is "%m"), it's assumed that ``N = 1``. N must
   be between 1 and 9. The merge pool specifier can only occur once per filename
   pattern.

 .. code-block:: console

     # Step 2: Run the program.
     % LLVM_PROFILE_FILE="foo.profraw" ./foo

 Creating coverage reports
 =========================

 Raw profiles have to be **indexed** before they can be used to generate
 coverage reports. This is done using the "merge" tool in ``llvm-profdata``, so
 named because it can combine and index profiles at the same time:

 .. code-block:: console

     # Step 3(a): Index the raw profile.
     % llvm-profdata merge -sparse foo.profraw -o foo.profdata

 There are multiple different ways to render coverage reports. One option is to
 generate a line-oriented report:

 .. code-block:: console

     # Step 3(b): Create a line-oriented coverage report.
     % llvm-cov show ./foo -instr-profile=foo.profdata

 To demangle any C++ identifiers in the output, use:

 .. code-block:: console

     % llvm-cov show ./foo -instr-profile=foo.profdata | c++filt -n

 This report includes a summary view as well as dedicated sub-views for
 templated functions and their instantiations. For our example program, we get
 distinct views for ``foo<int>(...)`` and ``foo<float>(...)``.  If
 ``-show-line-counts-or-regions`` is enabled, ``llvm-cov`` displays sub-line
 region counts (even in macro expansions):

 .. code-block:: none

        20|    1|#define BAR(x) ((x) || (x))
                                ^20     ^2
         2|    2|template <typename T> void foo(T x) {
        22|    3|  for (unsigned I = 0; I < 10; ++I) { BAR(I); }
                                        ^22     ^20  ^20^20
         2|    4|}
     ------------------
     | void foo<int>(int):
     |      1|    2|template <typename T> void foo(T x) {
     |     11|    3|  for (unsigned I = 0; I < 10; ++I) { BAR(I); }
     |                                     ^11     ^10  ^10^10
     |      1|    4|}
     ------------------
     | void foo<float>(int):
     |      1|    2|template <typename T> void foo(T x) {
     |     11|    3|  for (unsigned I = 0; I < 10; ++I) { BAR(I); }
     |                                     ^11     ^10  ^10^10
     |      1|    4|}
     ------------------

 It's possible to generate a file-level summary of coverage statistics (instead
 of a line-oriented report) with:

 .. code-block:: console

     # Step 3(c): Create a coverage summary.
     % llvm-cov report ./foo -instr-profile=foo.profdata
     Filename                    Regions    Miss   Cover Functions  Executed
     -----------------------------------------------------------------------
     /tmp/foo.cc                      13       0 100.00%         3   100.00%
     -----------------------------------------------------------------------
     TOTAL                            13       0 100.00%         3   100.00%

 A few final notes:

 * The ``-sparse`` flag is optional but can result in dramatically smaller
   indexed profiles. This option should not be used if the indexed profile will
   be reused for PGO.

 * Raw profiles can be discarded after they are indexed. Advanced use of the
   profile runtime library allows an instrumented program to merge profiling
   information directly into an existing raw profile on disk. The details are
   out of scope.

 * The ``llvm-profdata`` tool can be used to merge together multiple raw or
   indexed profiles. To combine profiling data from multiple runs of a program,
   try e.g:

   .. code-block:: console

       % llvm-profdata merge -sparse foo1.profraw foo2.profdata -o foo3.profdata

 Format compatibility guarantees
 ===============================

 * There are no backwards or forwards compatibility guarantees for the raw
   profile format. Raw profiles may be dependent on the specific compiler
   revision used to generate them. It's inadvisable to store raw profiles for
   long periods of time.

 * Tools must retain **backwards** compatibility with indexed profile formats.
   These formats are not forwards-compatible: i.e, a tool which uses format
   version X will not be able to understand format version (X+k).

 * There is a third format in play: the format of the coverage mappings emitted
   into instrumented binaries. Tools must retain **backwards** compatibility
   with these formats. These formats are not forwards-compatible.

 Using the profiling runtime without static initializers
 =======================================================

 By default the compiler runtime uses a static initializer to determine the
 profile output path and to register a writer function. To collect profiles
 without using static initializers, do this manually:

 * Export a ``int __llvm_profile_runtime`` symbol from each instrumented shared
   library and executable. When the linker finds a definition of this symbol, it
   knows to skip loading the object which contains the profiling runtime's
   static initializer.

 * Forward-declare ``void __llvm_profile_initialize_file(void)`` and call it
   once from each instrumented executable. This function parses
   ``LLVM_PROFILE_FILE``, sets the output path, and truncates any existing files
   at that path. To get the same behavior without truncating existing files,
   pass a filename pattern string to ``void __llvm_profile_set_filename(char
   *)``.  These calls can be placed anywhere so long as they precede all calls
   to ``__llvm_profile_write_file``.

 * Forward-declare ``int __llvm_profile_write_file(void)`` and call it to write
   out a profile. This function returns 0 when it succeeds, and a non-zero value
   otherwise. Calling this function multiple times appends profile data to an
   existing on-disk raw profile.

 Drawbacks and limitations
 =========================

 * Code coverage does not handle unpredictable changes in control flow or stack
   unwinding in the presence of exceptions precisely. Consider the following
   function:

   .. code-block:: cpp

       int f() {
         may_throw();
         return 0;
       }

   If the call to ``may_throw()`` propagates an exception into ``f``, the code
   coverage tool may mark the ``return`` statement as executed even though it is
   not. A call to ``longjmp()`` can have similar effects.
	==========================
	Source-based Code Coverage
	==========================

	.. contents::
	:local:

	Introduction
	============

	This document explains how to use clang's source-based code coverage feature.
	It's called "source-based" because it operates on AST and preprocessor
	information directly. This allows it to generate very precise coverage data.

	Clang ships two other code coverage implementations:

	* :doc:`SanitizerCoverage` - A low-overhead tool meant for use alongside the
	various sanitizers. It can provide up to edge-level coverage.

	* gcov - A GCC-compatible coverage implementation which operates on DebugInfo.

	From this point onwards "code coverage" will refer to the source-based kind.

	The code coverage workflow
	==========================

	The code coverage workflow consists of three main steps:

	* Compiling with coverage enabled.

	* Running the instrumented program.

	* Creating coverage reports.

	The next few sections work through a complete, copy-'n-paste friendly example
	based on this program:

	.. code-block:: cpp

	% cat <<EOF > foo.cc
	#define BAR(x) ((x) \|\| (x))
	template <typename T> void foo(T x) {
	for (unsigned I = 0; I < 10; ++I) { BAR(I); }
	}
	int main() {
	foo<int>(0);
	foo<float>(0);
	return 0;
	}
	EOF

	Compiling with coverage enabled
	===============================

	To compile code with coverage enabled, pass ``-fprofile-instr-generate
	-fcoverage-mapping`` to the compiler:

	.. code-block:: console

	# Step 1: Compile with coverage enabled.
	% clang++ -fprofile-instr-generate -fcoverage-mapping foo.cc -o foo

	Note that linking together code with and without coverage instrumentation is
	supported: any uninstrumented code simply won't be accounted for.

	Running the instrumented program
	================================

	The next step is to run the instrumented program. When the program exits it
	will write a raw profile to the path specified by the ``LLVM_PROFILE_FILE``
	environment variable. If that variable does not exist, the profile is written
	to ``default.profraw`` in the current directory of the program. If
	``LLVM_PROFILE_FILE`` contains a path to a non-existent directory, the missing
	directory structure will be created. Additionally, the following special
	pattern strings are rewritten:

	* "%p" expands out to the process ID.

	* "%h" expands out to the hostname of the machine running the program.

	* "%Nm" expands out to the instrumented binary's signature. When this pattern
	is specified, the runtime creates a pool of N raw profiles which are used for
	on-line profile merging. The runtime takes care of selecting a raw profile
	from the pool, locking it, and updating it before the program exits. If N is
	not specified (i.e the pattern is "%m"), it's assumed that ``N = 1``. N must
	be between 1 and 9. The merge pool specifier can only occur once per filename
	pattern.

	.. code-block:: console

	# Step 2: Run the program.
	% LLVM_PROFILE_FILE="foo.profraw" ./foo

	Creating coverage reports
	=========================

	Raw profiles have to be indexed before they can be used to generate
	coverage reports. This is done using the "merge" tool in ``llvm-profdata``, so
	named because it can combine and index profiles at the same time:

	.. code-block:: console

	# Step 3(a): Index the raw profile.
	% llvm-profdata merge -sparse foo.profraw -o foo.profdata

	There are multiple different ways to render coverage reports. One option is to
	generate a line-oriented report:

	.. code-block:: console

	# Step 3(b): Create a line-oriented coverage report.
	% llvm-cov show ./foo -instr-profile=foo.profdata

	To demangle any C++ identifiers in the output, use:

	.. code-block:: console

	% llvm-cov show ./foo -instr-profile=foo.profdata \| c++filt -n

	This report includes a summary view as well as dedicated sub-views for
	templated functions and their instantiations. For our example program, we get
	distinct views for ``foo<int>(...)`` and ``foo<float>(...)``. If
	``-show-line-counts-or-regions`` is enabled, ``llvm-cov`` displays sub-line
	region counts (even in macro expansions):

	.. code-block:: none

	20\| 1\|#define BAR(x) ((x) \|\| (x))
	^20 ^2
	2\| 2\|template <typename T> void foo(T x) {
	22\| 3\| for (unsigned I = 0; I < 10; ++I) { BAR(I); }
	^22 ^20 ^20^20
	2\| 4\|}
	------------------
	\| void foo<int>(int):
	\| 1\| 2\|template <typename T> void foo(T x) {
	\| 11\| 3\| for (unsigned I = 0; I < 10; ++I) { BAR(I); }
	\| ^11 ^10 ^10^10
	\| 1\| 4\|}
	------------------
	\| void foo<float>(int):
	\| 1\| 2\|template <typename T> void foo(T x) {
	\| 11\| 3\| for (unsigned I = 0; I < 10; ++I) { BAR(I); }
	\| ^11 ^10 ^10^10
	\| 1\| 4\|}
	------------------

	It's possible to generate a file-level summary of coverage statistics (instead
	of a line-oriented report) with:

	.. code-block:: console

	# Step 3(c): Create a coverage summary.
	% llvm-cov report ./foo -instr-profile=foo.profdata
	Filename Regions Miss Cover Functions Executed
	-----------------------------------------------------------------------
	/tmp/foo.cc 13 0 100.00% 3 100.00%
	-----------------------------------------------------------------------
	TOTAL 13 0 100.00% 3 100.00%

	A few final notes:

	* The ``-sparse`` flag is optional but can result in dramatically smaller
	indexed profiles. This option should not be used if the indexed profile will
	be reused for PGO.

	* Raw profiles can be discarded after they are indexed. Advanced use of the
	profile runtime library allows an instrumented program to merge profiling
	information directly into an existing raw profile on disk. The details are
	out of scope.

	* The ``llvm-profdata`` tool can be used to merge together multiple raw or
	indexed profiles. To combine profiling data from multiple runs of a program,
	try e.g:

	.. code-block:: console

	% llvm-profdata merge -sparse foo1.profraw foo2.profdata -o foo3.profdata

	Format compatibility guarantees
	===============================

	* There are no backwards or forwards compatibility guarantees for the raw
	profile format. Raw profiles may be dependent on the specific compiler
	revision used to generate them. It's inadvisable to store raw profiles for
	long periods of time.

	* Tools must retain backwards compatibility with indexed profile formats.
	These formats are not forwards-compatible: i.e, a tool which uses format
	version X will not be able to understand format version (X+k).

	* There is a third format in play: the format of the coverage mappings emitted
	into instrumented binaries. Tools must retain backwards compatibility
	with these formats. These formats are not forwards-compatible.

	Using the profiling runtime without static initializers
	=======================================================

	By default the compiler runtime uses a static initializer to determine the
	profile output path and to register a writer function. To collect profiles
	without using static initializers, do this manually:

	* Export a ``int __llvm_profile_runtime`` symbol from each instrumented shared
	library and executable. When the linker finds a definition of this symbol, it
	knows to skip loading the object which contains the profiling runtime's
	static initializer.

	* Forward-declare ``void __llvm_profile_initialize_file(void)`` and call it
	once from each instrumented executable. This function parses
	``LLVM_PROFILE_FILE``, sets the output path, and truncates any existing files
	at that path. To get the same behavior without truncating existing files,
	pass a filename pattern string to ``void __llvm_profile_set_filename(char
	*)``. These calls can be placed anywhere so long as they precede all calls
	to ``__llvm_profile_write_file``.

	* Forward-declare ``int __llvm_profile_write_file(void)`` and call it to write
	out a profile. This function returns 0 when it succeeds, and a non-zero value
	otherwise. Calling this function multiple times appends profile data to an
	existing on-disk raw profile.

	Drawbacks and limitations
	=========================

	* Code coverage does not handle unpredictable changes in control flow or stack
	unwinding in the presence of exceptions precisely. Consider the following
	function:

	.. code-block:: cpp

	int f() {
	may_throw();
	return 0;
	}

	If the call to ``may_throw()`` propagates an exception into ``f``, the code
	coverage tool may mark the ``return`` statement as executed even though it is
	not. A call to ``longjmp()`` can have similar effects.