Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / external / clang / e74dc199e95cc523c8806e0de41d8814e8bc5c42 / . / docs / InternalsManual.html
blob: 57f06316b1b1055f2c12c73f2b2eac23525bf9e8 [file] [log] [blame]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
"http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<title>"Clang" CFE Internals Manual</title>
<link type="text/css" rel="stylesheet" href="../menu.css">
<link type="text/css" rel="stylesheet" href="../content.css">
<style type="text/css">
td {
vertical-align: top;
}
</style>
</head>
<body>
<!--#include virtual="../menu.html.incl"-->
<div id="content">
<h1>"Clang" CFE Internals Manual</h1>
<ul>
<li><a href="#intro">Introduction</a></li>
<li><a href="#libsupport">LLVM Support Library</a></li>
<li><a href="#libbasic">The Clang 'Basic' Library</a>
<ul>
<li><a href="#Diagnostics">The Diagnostics Subsystem</a></li>
<li><a href="#SourceLocation">The SourceLocation and SourceManager
classes</a></li>
<li><a href="#SourceRange">SourceRange and CharSourceRange</a></li>
</ul>
</li>
<li><a href="#libdriver">The Driver Library</a>
</li>
<li><a href="#pch">Precompiled Headers</a>
<li><a href="#libfrontend">The Frontend Library</a>
</li>
<li><a href="#liblex">The Lexer and Preprocessor Library</a>
<ul>
<li><a href="#Token">The Token class</a></li>
<li><a href="#Lexer">The Lexer class</a></li>
<li><a href="#AnnotationToken">Annotation Tokens</a></li>
<li><a href="#TokenLexer">The TokenLexer class</a></li>
<li><a href="#MultipleIncludeOpt">The MultipleIncludeOpt class</a></li>
</ul>
</li>
<li><a href="#libparse">The Parser Library</a>
</li>
<li><a href="#libast">The AST Library</a>
<ul>
<li><a href="#Type">The Type class and its subclasses</a></li>
<li><a href="#QualType">The QualType class</a></li>
<li><a href="#DeclarationName">Declaration names</a></li>
<li><a href="#DeclContext">Declaration contexts</a>
<ul>
<li><a href="#Redeclarations">Redeclarations and Overloads</a></li>
<li><a href="#LexicalAndSemanticContexts">Lexical and Semantic
Contexts</a></li>
<li><a href="#TransparentContexts">Transparent Declaration Contexts</a></li>
<li><a href="#MultiDeclContext">Multiply-Defined Declaration Contexts</a></li>
</ul>
</li>
<li><a href="#CFG">The CFG class</a></li>
<li><a href="#Constants">Constant Folding in the Clang AST</a></li>
</ul>
</li>
<li><a href="#Howtos">Howto guides</a>
<ul>
<li><a href="#AddingAttributes">How to add an attribute</a></li>
<li><a href="#AddingExprStmt">How to add a new expression or statement</a></li>
</ul>
</li>
</ul>
<!-- ======================================================================= -->
<h2 id="intro">Introduction</h2>
<!-- ======================================================================= -->
<p>This document describes some of the more important APIs and internal design
decisions made in the Clang C front-end. The purpose of this document is to
both capture some of this high level information and also describe some of the
design decisions behind it. This is meant for people interested in hacking on
Clang, not for end-users. The description below is categorized by
libraries, and does not describe any of the clients of the libraries.</p>
<!-- ======================================================================= -->
<h2 id="libsupport">LLVM Support Library</h2>
<!-- ======================================================================= -->
<p>The LLVM libsupport library provides many underlying libraries and
<a href="http://llvm.org/docs/ProgrammersManual.html">data-structures</a>,
including command line option processing, various containers and a system
abstraction layer, which is used for file system access.</p>
<!-- ======================================================================= -->
<h2 id="libbasic">The Clang 'Basic' Library</h2>
<!-- ======================================================================= -->
<p>This library certainly needs a better name. The 'basic' library contains a
number of low-level utilities for tracking and manipulating source buffers,
locations within the source buffers, diagnostics, tokens, target abstraction,
and information about the subset of the language being compiled for.</p>
<p>Part of this infrastructure is specific to C (such as the TargetInfo class),
other parts could be reused for other non-C-based languages (SourceLocation,
SourceManager, Diagnostics, FileManager). When and if there is future demand
we can figure out if it makes sense to introduce a new library, move the general
classes somewhere else, or introduce some other solution.</p>
<p>We describe the roles of these classes in order of their dependencies.</p>
<!-- ======================================================================= -->
<h3 id="Diagnostics">The Diagnostics Subsystem</h3>
<!-- ======================================================================= -->
<p>The Clang Diagnostics subsystem is an important part of how the compiler
communicates with the human. Diagnostics are the warnings and errors produced
when the code is incorrect or dubious. In Clang, each diagnostic produced has
(at the minimum) a unique ID, an English translation associated with it, a <a
href="#SourceLocation">SourceLocation</a> to "put the caret", and a severity (e.g.
<tt>WARNING</tt> or <tt>ERROR</tt>). They can also optionally include a number
of arguments to the dianostic (which fill in "%0"'s in the string) as well as a
number of source ranges that related to the diagnostic.</p>
<p>In this section, we'll be giving examples produced by the Clang command line
driver, but diagnostics can be <a href="#DiagnosticClient">rendered in many
different ways</a> depending on how the DiagnosticClient interface is
implemented. A representative example of a diagnostic is:</p>
<pre>
t.c:38:15: error: invalid operands to binary expression ('int *' and '_Complex float')
<span style="color:darkgreen">P = (P-42) + Gamma*4;</span>
<span style="color:blue">~~~~~~ ^ ~~~~~~~</span>
</pre>
<p>In this example, you can see the English translation, the severity (error),
you can see the source location (the caret ("^") and file/line/column info),
the source ranges "~~~~", arguments to the diagnostic ("int*" and "_Complex
float"). You'll have to believe me that there is a unique ID backing the
diagnostic :).</p>
<p>Getting all of this to happen has several steps and involves many moving
pieces, this section describes them and talks about best practices when adding
a new diagnostic.</p>
<!-- ============================= -->
<h4>The Diagnostic*Kinds.td files</h4>
<!-- ============================= -->
<p>Diagnostics are created by adding an entry to one of the <tt>
clang/Basic/Diagnostic*Kinds.td</tt> files, depending on what library will
be using it. From this file, tblgen generates the unique ID of the diagnostic,
the severity of the diagnostic and the English translation + format string.</p>
<p>There is little sanity with the naming of the unique ID's right now. Some
start with err_, warn_, ext_ to encode the severity into the name. Since the
enum is referenced in the C++ code that produces the diagnostic, it is somewhat
useful for it to be reasonably short.</p>
<p>The severity of the diagnostic comes from the set {<tt>NOTE</tt>,
<tt>WARNING</tt>, <tt>EXTENSION</tt>, <tt>EXTWARN</tt>, <tt>ERROR</tt>}. The
<tt>ERROR</tt> severity is used for diagnostics indicating the program is never
acceptable under any circumstances. When an error is emitted, the AST for the
input code may not be fully built. The <tt>EXTENSION</tt> and <tt>EXTWARN</tt>
severities are used for extensions to the language that Clang accepts. This
means that Clang fully understands and can represent them in the AST, but we
produce diagnostics to tell the user their code is non-portable. The difference
is that the former are ignored by default, and the later warn by default. The
<tt>WARNING</tt> severity is used for constructs that are valid in the currently
selected source language but that are dubious in some way. The <tt>NOTE</tt>
level is used to staple more information onto previous diagnostics.</p>
<p>These <em>severities</em> are mapped into a smaller set (the
Diagnostic::Level enum, {<tt>Ignored</tt>, <tt>Note</tt>, <tt>Warning</tt>,
<tt>Error</tt>, <tt>Fatal</tt> }) of output <em>levels</em> by the diagnostics
subsystem based on various configuration options. Clang internally supports a
fully fine grained mapping mechanism that allows you to map almost any
diagnostic to the output level that you want. The only diagnostics that cannot
be mapped are <tt>NOTE</tt>s, which always follow the severity of the previously
emitted diagnostic and <tt>ERROR</tt>s, which can only be mapped to
<tt>Fatal</tt> (it is not possible to turn an error into a warning,
for example).</p>
<p>Diagnostic mappings are used in many ways. For example, if the user
specifies <tt>-pedantic</tt>, <tt>EXTENSION</tt> maps to <tt>Warning</tt>, if
they specify <tt>-pedantic-errors</tt>, it turns into <tt>Error</tt>. This is
used to implement options like <tt>-Wunused_macros</tt>, <tt>-Wundef</tt> etc.
</p>
<p>
Mapping to <tt>Fatal</tt> should only be used for diagnostics that are
considered so severe that error recovery won't be able to recover sensibly from
them (thus spewing a ton of bogus errors). One example of this class of error
are failure to #include a file.
</p>
<!-- ================= -->
<h4>The Format String</h4>
<!-- ================= -->
<p>The format string for the diagnostic is very simple, but it has some power.
It takes the form of a string in English with markers that indicate where and
how arguments to the diagnostic are inserted and formatted. For example, here
are some simple format strings:</p>
<pre>
"binary integer literals are an extension"
"format string contains '\\0' within the string body"
"more '<b>%%</b>' conversions than data arguments"
"invalid operands to binary expression (<b>%0</b> and <b>%1</b>)"
"overloaded '<b>%0</b>' must be a <b>%select{unary|binary|unary or binary}2</b> operator"
" (has <b>%1</b> parameter<b>%s1</b>)"
</pre>
<p>These examples show some important points of format strings. You can use any
plain ASCII character in the diagnostic string except "%" without a problem,
but these are C strings, so you have to use and be aware of all the C escape
sequences (as in the second example). If you want to produce a "%" in the
output, use the "%%" escape sequence, like the third diagnostic. Finally,
Clang uses the "%...[digit]" sequences to specify where and how arguments to
the diagnostic are formatted.</p>
<p>Arguments to the diagnostic are numbered according to how they are specified
by the C++ code that <a href="#producingdiag">produces them</a>, and are
referenced by <tt>%0</tt> .. <tt>%9</tt>. If you have more than 10 arguments
to your diagnostic, you are doing something wrong :). Unlike printf, there
is no requirement that arguments to the diagnostic end up in the output in
the same order as they are specified, you could have a format string with
<tt>"%1 %0"</tt> that swaps them, for example. The text in between the
percent and digit are formatting instructions. If there are no instructions,
the argument is just turned into a string and substituted in.</p>
<p>Here are some "best practices" for writing the English format string:</p>
<ul>
<li>Keep the string short. It should ideally fit in the 80 column limit of the
<tt>DiagnosticKinds.td</tt> file. This avoids the diagnostic wrapping when
printed, and forces you to think about the important point you are conveying
with the diagnostic.</li>
<li>Take advantage of location information. The user will be able to see the
line and location of the caret, so you don't need to tell them that the
problem is with the 4th argument to the function: just point to it.</li>
<li>Do not capitalize the diagnostic string, and do not end it with a
period.</li>
<li>If you need to quote something in the diagnostic string, use single
quotes.</li>
</ul>
<p>Diagnostics should never take random English strings as arguments: you
shouldn't use <tt>"you have a problem with %0"</tt> and pass in things like
<tt>"your argument"</tt> or <tt>"your return value"</tt> as arguments. Doing
this prevents <a href="#translation">translating</a> the Clang diagnostics to
other languages (because they'll get random English words in their otherwise
localized diagnostic). The exceptions to this are C/C++ language keywords
(e.g. auto, const, mutable, etc) and C/C++ operators (<tt>/=</tt>). Note
that things like "pointer" and "reference" are not keywords. On the other
hand, you <em>can</em> include anything that comes from the user's source code,
including variable names, types, labels, etc. The 'select' format can be
used to achieve this sort of thing in a localizable way, see below.</p>
<!-- ==================================== -->
<h4>Formatting a Diagnostic Argument</h4>
<!-- ==================================== -->
<p>Arguments to diagnostics are fully typed internally, and come from a couple
different classes: integers, types, names, and random strings. Depending on
the class of the argument, it can be optionally formatted in different ways.
This gives the DiagnosticClient information about what the argument means
without requiring it to use a specific presentation (consider this MVC for
Clang :).</p>
<p>Here are the different diagnostic argument formats currently supported by
Clang:</p>
<table>
<tr><td colspan="2"><b>"s" format</b></td></tr>
<tr><td>Example:</td><td><tt>"requires %1 parameter%s1"</tt></td></tr>
<tr><td>Class:</td><td>Integers</td></tr>
<tr><td>Description:</td><td>This is a simple formatter for integers that is
useful when producing English diagnostics. When the integer is 1, it prints
as nothing. When the integer is not 1, it prints as "s". This allows some
simple grammatical forms to be to be handled correctly, and eliminates the
need to use gross things like <tt>"requires %1 parameter(s)"</tt>.</td></tr>
<tr><td colspan="2"><b>"select" format</b></td></tr>
<tr><td>Example:</td><td><tt>"must be a %select{unary|binary|unary or binary}2
operator"</tt></td></tr>
<tr><td>Class:</td><td>Integers</td></tr>
<tr><td>Description:</td><td><p>This format specifier is used to merge multiple
related diagnostics together into one common one, without requiring the
difference to be specified as an English string argument. Instead of
specifying the string, the diagnostic gets an integer argument and the
format string selects the numbered option. In this case, the "%2" value
must be an integer in the range [0..2]. If it is 0, it prints 'unary', if
it is 1 it prints 'binary' if it is 2, it prints 'unary or binary'. This
allows other language translations to substitute reasonable words (or entire
phrases) based on the semantics of the diagnostic instead of having to do
things textually.</p>
<p>The selected string does undergo formatting.</p></td></tr>
<tr><td colspan="2"><b>"plural" format</b></td></tr>
<tr><td>Example:</td><td><tt>"you have %1 %plural{1:mouse|:mice}1 connected to
your computer"</tt></td></tr>
<tr><td>Class:</td><td>Integers</td></tr>
<tr><td>Description:</td><td><p>This is a formatter for complex plural forms.
It is designed to handle even the requirements of languages with very
complex plural forms, as many Baltic languages have. The argument consists
of a series of expression/form pairs, separated by ':', where the first form
whose expression evaluates to true is the result of the modifier.</p>
<p>An expression can be empty, in which case it is always true. See the
example at the top. Otherwise, it is a series of one or more numeric
conditions, separated by ','. If any condition matches, the expression
matches. Each numeric condition can take one of three forms.</p>
<ul>
<li>number: A simple decimal number matches if the argument is the same
as the number. Example: <tt>"%plural{1:mouse|:mice}4"</tt></li>
<li>range: A range in square brackets matches if the argument is within
the range. Then range is inclusive on both ends. Example:
<tt>"%plural{0:none|1:one|[2,5]:some|:many}2"</tt></li>
<li>modulo: A modulo operator is followed by a number, and
equals sign and either a number or a range. The tests are the
same as for plain
numbers and ranges, but the argument is taken modulo the number first.
Example: <tt>"%plural{%100=0:even hundred|%100=[1,50]:lower half|:everything
else}1"</tt></li>
</ul>
<p>The parser is very unforgiving. A syntax error, even whitespace, will
abort, as will a failure to match the argument against any
expression.</p></td></tr>
<tr><td colspan="2"><b>"ordinal" format</b></td></tr>
<tr><td>Example:</td><td><tt>"ambiguity in %ordinal0 argument"</tt></td></tr>
<tr><td>Class:</td><td>Integers</td></tr>
<tr><td>Description:</td><td><p>This is a formatter which represents the
argument number as an ordinal: the value <tt>1</tt> becomes <tt>1st</tt>,
<tt>3</tt> becomes <tt>3rd</tt>, and so on. Values less than <tt>1</tt>
are not supported.</p>
<p>This formatter is currently hard-coded to use English ordinals.</p></td></tr>
<tr><td colspan="2"><b>"objcclass" format</b></td></tr>
<tr><td>Example:</td><td><tt>"method %objcclass0 not found"</tt></td></tr>
<tr><td>Class:</td><td>DeclarationName</td></tr>
<tr><td>Description:</td><td><p>This is a simple formatter that indicates the
DeclarationName corresponds to an Objective-C class method selector. As
such, it prints the selector with a leading '+'.</p></td></tr>
<tr><td colspan="2"><b>"objcinstance" format</b></td></tr>
<tr><td>Example:</td><td><tt>"method %objcinstance0 not found"</tt></td></tr>
<tr><td>Class:</td><td>DeclarationName</td></tr>
<tr><td>Description:</td><td><p>This is a simple formatter that indicates the
DeclarationName corresponds to an Objective-C instance method selector. As
such, it prints the selector with a leading '-'.</p></td></tr>
<tr><td colspan="2"><b>"q" format</b></td></tr>
<tr><td>Example:</td><td><tt>"candidate found by name lookup is %q0"</tt></td></tr>
<tr><td>Class:</td><td>NamedDecl*</td></tr>
<tr><td>Description</td><td><p>This formatter indicates that the fully-qualified name of the declaration should be printed, e.g., "std::vector" rather than "vector".</p></td></tr>
<tr><td colspan="2"><b>"diff" format</b></td></tr>
<tr><td>Example:</td><td><tt>"no known conversion %diff{from | to | }1,2"</tt></td></tr>
<tr><td>Class:</td><td>QualType</td></tr>
<tr><td>Description</td><td><p>This formatter takes two QualTypes and attempts to print a template difference between the two. If tree printing is off, the text inside the braces before the pipe is printed, with the formatted text replacing the $. If tree printing is on, the text after the pipe is printed and a type tree is printed after the diagnostic message.
</p></td></tr>
</table>
<p>It is really easy to add format specifiers to the Clang diagnostics system,
but they should be discussed before they are added. If you are creating a lot
of repetitive diagnostics and/or have an idea for a useful formatter, please
bring it up on the cfe-dev mailing list.</p>
<!-- ===================================================== -->
<h4 id="producingdiag">Producing the Diagnostic</h4>
<!-- ===================================================== -->
<p>Now that you've created the diagnostic in the DiagnosticKinds.td file, you
need to write the code that detects the condition in question and emits the
new diagnostic. Various components of Clang (e.g. the preprocessor, Sema,
etc) provide a helper function named "Diag". It creates a diagnostic and
accepts the arguments, ranges, and other information that goes along with
it.</p>
<p>For example, the binary expression error comes from code like this:</p>
<pre>
if (various things that are bad)
Diag(Loc, diag::err_typecheck_invalid_operands)
&lt;&lt; lex-&gt;getType() &lt;&lt; rex-&gt;getType()
&lt;&lt; lex-&gt;getSourceRange() &lt;&lt; rex-&gt;getSourceRange();
</pre>
<p>This shows that use of the Diag method: they take a location (a <a
href="#SourceLocation">SourceLocation</a> object) and a diagnostic enum value
(which matches the name from DiagnosticKinds.td). If the diagnostic takes
arguments, they are specified with the &lt;&lt; operator: the first argument
becomes %0, the second becomes %1, etc. The diagnostic interface allows you to
specify arguments of many different types, including <tt>int</tt> and
<tt>unsigned</tt> for integer arguments, <tt>const char*</tt> and
<tt>std::string</tt> for string arguments, <tt>DeclarationName</tt> and
<tt>const IdentifierInfo*</tt> for names, <tt>QualType</tt> for types, etc.
SourceRanges are also specified with the &lt;&lt; operator, but do not have a
specific ordering requirement.</p>
<p>As you can see, adding and producing a diagnostic is pretty straightforward.
The hard part is deciding exactly what you need to say to help the user, picking
a suitable wording, and providing the information needed to format it correctly.
The good news is that the call site that issues a diagnostic should be
completely independent of how the diagnostic is formatted and in what language
it is rendered.
</p>
<!-- ==================================================== -->
<h4 id="fix-it-hints">Fix-It Hints</h4>
<!-- ==================================================== -->
<p>In some cases, the front end emits diagnostics when it is clear
that some small change to the source code would fix the problem. For
example, a missing semicolon at the end of a statement or a use of
deprecated syntax that is easily rewritten into a more modern form.
Clang tries very hard to emit the diagnostic and recover gracefully
in these and other cases.</p>
<p>However, for these cases where the fix is obvious, the diagnostic
can be annotated with a hint (referred to as a "fix-it hint") that
describes how to change the code referenced by the diagnostic to fix
the problem. For example, it might add the missing semicolon at the
end of the statement or rewrite the use of a deprecated construct
into something more palatable. Here is one such example from the C++
front end, where we warn about the right-shift operator changing
meaning from C++98 to C++11:</p>
<pre>
test.cpp:3:7: warning: use of right-shift operator ('&gt;&gt;') in template argument will require parentheses in C++11
A&lt;100 &gt;&gt; 2&gt; *a;
^
( )
</pre>
<p>Here, the fix-it hint is suggesting that parentheses be added,
and showing exactly where those parentheses would be inserted into the
source code. The fix-it hints themselves describe what changes to make
to the source code in an abstract manner, which the text diagnostic
printer renders as a line of "insertions" below the caret line. <a
href="#DiagnosticClient">Other diagnostic clients</a> might choose
to render the code differently (e.g., as markup inline) or even give
the user the ability to automatically fix the problem.</p>
<p>Fix-it hints on errors and warnings need to obey these rules:</p>
<ul>
<li>Since they are automatically applied if <code>-Xclang -fixit</code>
is passed to the driver, they should only be used when it's very likely they
match the user's intent.</li>
<li>Clang must recover from errors as if the fix-it had been applied.</li>
</ul>
<p>If a fix-it can't obey these rules, put the fix-it on a note. Fix-its on
notes are not applied automatically.</p>
<p>All fix-it hints are described by the <code>FixItHint</code> class,
instances of which should be attached to the diagnostic using the
&lt;&lt; operator in the same way that highlighted source ranges and
arguments are passed to the diagnostic. Fix-it hints can be created
with one of three constructors:</p>
<dl>
<dt><code>FixItHint::CreateInsertion(Loc, Code)</code></dt>
<dd>Specifies that the given <code>Code</code> (a string) should be inserted
before the source location <code>Loc</code>.</dd>
<dt><code>FixItHint::CreateRemoval(Range)</code></dt>
<dd>Specifies that the code in the given source <code>Range</code>
should be removed.</dd>
<dt><code>FixItHint::CreateReplacement(Range, Code)</code></dt>
<dd>Specifies that the code in the given source <code>Range</code>
should be removed, and replaced with the given <code>Code</code> string.</dd>
</dl>
<!-- ============================================================= -->
<h4><a name="DiagnosticClient">The DiagnosticClient Interface</a></h4>
<!-- ============================================================= -->
<p>Once code generates a diagnostic with all of the arguments and the rest of
the relevant information, Clang needs to know what to do with it. As previously
mentioned, the diagnostic machinery goes through some filtering to map a
severity onto a diagnostic level, then (assuming the diagnostic is not mapped to
"<tt>Ignore</tt>") it invokes an object that implements the DiagnosticClient
interface with the information.</p>
<p>It is possible to implement this interface in many different ways. For
example, the normal Clang DiagnosticClient (named 'TextDiagnosticPrinter') turns
the arguments into strings (according to the various formatting rules), prints
out the file/line/column information and the string, then prints out the line of
code, the source ranges, and the caret. However, this behavior isn't required.
</p>
<p>Another implementation of the DiagnosticClient interface is the
'TextDiagnosticBuffer' class, which is used when Clang is in -verify mode.
Instead of formatting and printing out the diagnostics, this implementation just
captures and remembers the diagnostics as they fly by. Then -verify compares
the list of produced diagnostics to the list of expected ones. If they disagree,
it prints out its own output. Full documentation for the -verify mode can be
found in the Clang API documentation for VerifyDiagnosticConsumer, <a
href="/doxygen/classclang_1_1VerifyDiagnosticConsumer.html#details">here</a>.
</p>
<p>There are many other possible implementations of this interface, and this is
why we prefer diagnostics to pass down rich structured information in arguments.
For example, an HTML output might want declaration names be linkified to where
they come from in the source. Another example is that a GUI might let you click
on typedefs to expand them. This application would want to pass significantly
more information about types through to the GUI than a simple flat string. The
interface allows this to happen.</p>
<!-- ====================================================== -->
<h4><a name="translation">Adding Translations to Clang</a></h4>
<!-- ====================================================== -->
<p>Not possible yet! Diagnostic strings should be written in UTF-8, the client
can translate to the relevant code page if needed. Each translation completely
replaces the format string for the diagnostic.</p>
<!-- ======================================================================= -->
<h3 id="SourceLocation">The SourceLocation and SourceManager classes</h3>
<!-- ======================================================================= -->
<p>Strangely enough, the SourceLocation class represents a location within the
source code of the program. Important design points include:</p>
<ol>
<li>sizeof(SourceLocation) must be extremely small, as these are embedded into
many AST nodes and are passed around often. Currently it is 32 bits.</li>
<li>SourceLocation must be a simple value object that can be efficiently
copied.</li>
<li>We should be able to represent a source location for any byte of any input
file. This includes in the middle of tokens, in whitespace, in trigraphs,
etc.</li>
<li>A SourceLocation must encode the current #include stack that was active when
the location was processed. For example, if the location corresponds to a
token, it should contain the set of #includes active when the token was
lexed. This allows us to print the #include stack for a diagnostic.</li>
<li>SourceLocation must be able to describe macro expansions, capturing both
the ultimate instantiation point and the source of the original character
data.</li>
</ol>
<p>In practice, the SourceLocation works together with the SourceManager class
to encode two pieces of information about a location: its spelling location
and its instantiation location. For most tokens, these will be the same.
However, for a macro expansion (or tokens that came from a _Pragma directive)
these will describe the location of the characters corresponding to the token
and the location where the token was used (i.e. the macro instantiation point
or the location of the _Pragma itself).</p>
<p>The Clang front-end inherently depends on the location of a token being
tracked correctly. If it is ever incorrect, the front-end may get confused and
die. The reason for this is that the notion of the 'spelling' of a Token in
Clang depends on being able to find the original input characters for the token.
This concept maps directly to the "spelling location" for the token.</p>
<!-- ======================================================================= -->
<h3 id="SourceRange">SourceRange and CharSourceRange</h3>
<!-- ======================================================================= -->
<!-- mostly taken from
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2010-August/010595.html -->
<p>Clang represents most source ranges by [first, last], where first and last
each point to the beginning of their respective tokens. For example
consider the SourceRange of the following statement:</p>
<pre>
x = foo + bar;
^first ^last
</pre>
<p>To map from this representation to a character-based
representation, the 'last' location needs to be adjusted to point to
(or past) the end of that token with either
<code>Lexer::MeasureTokenLength()</code> or
<code>Lexer::getLocForEndOfToken()</code>. For the rare cases
where character-level source ranges information is needed we use
the <code>CharSourceRange</code> class.</p>
<!-- ======================================================================= -->
<h2 id="libdriver">The Driver Library</h2>
<!-- ======================================================================= -->
<p>The clang Driver and library are documented <a
href="DriverInternals.html">here</a>.<p>
<!-- ======================================================================= -->
<h2 id="pch">Precompiled Headers</h2>
<!-- ======================================================================= -->
<p>Clang supports two implementations of precompiled headers. The
default implementation, precompiled headers (<a
href="PCHInternals.html">PCH</a>) uses a serialized representation
of Clang's internal data structures, encoded with the <a
href="http://llvm.org/docs/BitCodeFormat.html">LLVM bitstream
format</a>. Pretokenized headers (<a
href="PTHInternals.html">PTH</a>), on the other hand, contain a
serialized representation of the tokens encountered when
preprocessing a header (and anything that header includes).</p>
<!-- ======================================================================= -->
<h2 id="libfrontend">The Frontend Library</h2>
<!-- ======================================================================= -->
<p>The Frontend library contains functionality useful for building
tools on top of the clang libraries, for example several methods for
outputting diagnostics.</p>
<!-- ======================================================================= -->
<h2 id="liblex">The Lexer and Preprocessor Library</h2>
<!-- ======================================================================= -->
<p>The Lexer library contains several tightly-connected classes that are involved
with the nasty process of lexing and preprocessing C source code. The main
interface to this library for outside clients is the large <a
href="#Preprocessor">Preprocessor</a> class.
It contains the various pieces of state that are required to coherently read
tokens out of a translation unit.</p>
<p>The core interface to the Preprocessor object (once it is set up) is the
Preprocessor::Lex method, which returns the next <a href="#Token">Token</a> from
the preprocessor stream. There are two types of token providers that the
preprocessor is capable of reading from: a buffer lexer (provided by the <a
href="#Lexer">Lexer</a> class) and a buffered token stream (provided by the <a
href="#TokenLexer">TokenLexer</a> class).
<!-- ======================================================================= -->
<h3 id="Token">The Token class</h3>
<!-- ======================================================================= -->
<p>The Token class is used to represent a single lexed token. Tokens are
intended to be used by the lexer/preprocess and parser libraries, but are not
intended to live beyond them (for example, they should not live in the ASTs).<p>
<p>Tokens most often live on the stack (or some other location that is efficient
to access) as the parser is running, but occasionally do get buffered up. For
example, macro definitions are stored as a series of tokens, and the C++
front-end periodically needs to buffer tokens up for tentative parsing and
various pieces of look-ahead. As such, the size of a Token matter. On a 32-bit
system, sizeof(Token) is currently 16 bytes.</p>
<p>Tokens occur in two forms: "<a href="#AnnotationToken">Annotation
Tokens</a>" and normal tokens. Normal tokens are those returned by the lexer,
annotation tokens represent semantic information and are produced by the parser,
replacing normal tokens in the token stream. Normal tokens contain the
following information:</p>
<ul>
<li><b>A SourceLocation</b> - This indicates the location of the start of the
token.</li>
<li><b>A length</b> - This stores the length of the token as stored in the
SourceBuffer. For tokens that include them, this length includes trigraphs and
escaped newlines which are ignored by later phases of the compiler. By pointing
into the original source buffer, it is always possible to get the original
spelling of a token completely accurately.</li>
<li><b>IdentifierInfo</b> - If a token takes the form of an identifier, and if
identifier lookup was enabled when the token was lexed (e.g. the lexer was not
reading in 'raw' mode) this contains a pointer to the unique hash value for the
identifier. Because the lookup happens before keyword identification, this
field is set even for language keywords like 'for'.</li>
<li><b>TokenKind</b> - This indicates the kind of token as classified by the
lexer. This includes things like <tt>tok::starequal</tt> (for the "*="
operator), <tt>tok::ampamp</tt> for the "&amp;&amp;" token, and keyword values
(e.g. <tt>tok::kw_for</tt>) for identifiers that correspond to keywords. Note
that some tokens can be spelled multiple ways. For example, C++ supports
"operator keywords", where things like "and" are treated exactly like the
"&amp;&amp;" operator. In these cases, the kind value is set to
<tt>tok::ampamp</tt>, which is good for the parser, which doesn't have to
consider both forms. For something that cares about which form is used (e.g.
the preprocessor 'stringize' operator) the spelling indicates the original
form.</li>
<li><b>Flags</b> - There are currently four flags tracked by the
lexer/preprocessor system on a per-token basis:
<ol>
<li><b>StartOfLine</b> - This was the first token that occurred on its input
source line.</li>
<li><b>LeadingSpace</b> - There was a space character either immediately
before the token or transitively before the token as it was expanded
through a macro. The definition of this flag is very closely defined by
the stringizing requirements of the preprocessor.</li>
<li><b>DisableExpand</b> - This flag is used internally to the preprocessor to
represent identifier tokens which have macro expansion disabled. This
prevents them from being considered as candidates for macro expansion ever
in the future.</li>
<li><b>NeedsCleaning</b> - This flag is set if the original spelling for the
token includes a trigraph or escaped newline. Since this is uncommon,
many pieces of code can fast-path on tokens that did not need cleaning.
</ol>
</li>
</ul>
<p>One interesting (and somewhat unusual) aspect of normal tokens is that they
don't contain any semantic information about the lexed value. For example, if
the token was a pp-number token, we do not represent the value of the number
that was lexed (this is left for later pieces of code to decide). Additionally,
the lexer library has no notion of typedef names vs variable names: both are
returned as identifiers, and the parser is left to decide whether a specific
identifier is a typedef or a variable (tracking this requires scope information
among other things). The parser can do this translation by replacing tokens
returned by the preprocessor with "Annotation Tokens".</p>
<!-- ======================================================================= -->
<h3 id="AnnotationToken">Annotation Tokens</h3>
<!-- ======================================================================= -->
<p>Annotation Tokens are tokens that are synthesized by the parser and injected
into the preprocessor's token stream (replacing existing tokens) to record
semantic information found by the parser. For example, if "foo" is found to be
a typedef, the "foo" <tt>tok::identifier</tt> token is replaced with an
<tt>tok::annot_typename</tt>. This is useful for a couple of reasons: 1) this
makes it easy to handle qualified type names (e.g. "foo::bar::baz&lt;42&gt;::t")
in C++ as a single "token" in the parser. 2) if the parser backtracks, the
reparse does not need to redo semantic analysis to determine whether a token
sequence is a variable, type, template, etc.</p>
<p>Annotation Tokens are created by the parser and reinjected into the parser's
token stream (when backtracking is enabled). Because they can only exist in
tokens that the preprocessor-proper is done with, it doesn't need to keep around
flags like "start of line" that the preprocessor uses to do its job.
Additionally, an annotation token may "cover" a sequence of preprocessor tokens
(e.g. <tt>a::b::c</tt> is five preprocessor tokens). As such, the valid fields
of an annotation token are different than the fields for a normal token (but
they are multiplexed into the normal Token fields):</p>
<ul>
<li><b>SourceLocation "Location"</b> - The SourceLocation for the annotation
token indicates the first token replaced by the annotation token. In the example
above, it would be the location of the "a" identifier.</li>
<li><b>SourceLocation "AnnotationEndLoc"</b> - This holds the location of the
last token replaced with the annotation token. In the example above, it would
be the location of the "c" identifier.</li>
<li><b>void* "AnnotationValue"</b> - This contains an opaque object
that the parser gets from Sema. The parser merely preserves the
information for Sema to later interpret based on the annotation token
kind.</li>
<li><b>TokenKind "Kind"</b> - This indicates the kind of Annotation token this
is. See below for the different valid kinds.</li>
</ul>
<p>Annotation tokens currently come in three kinds:</p>
<ol>
<li><b>tok::annot_typename</b>: This annotation token represents a
resolved typename token that is potentially qualified. The
AnnotationValue field contains the <tt>QualType</tt> returned by
Sema::getTypeName(), possibly with source location information
attached.</li>
<li><b>tok::annot_cxxscope</b>: This annotation token represents a C++
scope specifier, such as "A::B::". This corresponds to the grammar
productions "::" and ":: [opt] nested-name-specifier". The
AnnotationValue pointer is a <tt>NestedNameSpecifier*</tt> returned by
the Sema::ActOnCXXGlobalScopeSpecifier and
Sema::ActOnCXXNestedNameSpecifier callbacks.</li>
<li><b>tok::annot_template_id</b>: This annotation token represents a
C++ template-id such as "foo&lt;int, 4&gt;", where "foo" is the name
of a template. The AnnotationValue pointer is a pointer to a malloc'd
TemplateIdAnnotation object. Depending on the context, a parsed
template-id that names a type might become a typename annotation token
(if all we care about is the named type, e.g., because it occurs in a
type specifier) or might remain a template-id token (if we want to
retain more source location information or produce a new type, e.g.,
in a declaration of a class template specialization). template-id
annotation tokens that refer to a type can be "upgraded" to typename
annotation tokens by the parser.</li>
</ol>
<p>As mentioned above, annotation tokens are not returned by the preprocessor,
they are formed on demand by the parser. This means that the parser has to be
aware of cases where an annotation could occur and form it where appropriate.
This is somewhat similar to how the parser handles Translation Phase 6 of C99:
String Concatenation (see C99 5.1.1.2). In the case of string concatenation,
the preprocessor just returns distinct tok::string_literal and
tok::wide_string_literal tokens and the parser eats a sequence of them wherever
the grammar indicates that a string literal can occur.</p>
<p>In order to do this, whenever the parser expects a tok::identifier or
tok::coloncolon, it should call the TryAnnotateTypeOrScopeToken or
TryAnnotateCXXScopeToken methods to form the annotation token. These methods
will maximally form the specified annotation tokens and replace the current
token with them, if applicable. If the current tokens is not valid for an
annotation token, it will remain an identifier or :: token.</p>
<!-- ======================================================================= -->
<h3 id="Lexer">The Lexer class</h3>
<!-- ======================================================================= -->
<p>The Lexer class provides the mechanics of lexing tokens out of a source
buffer and deciding what they mean. The Lexer is complicated by the fact that
it operates on raw buffers that have not had spelling eliminated (this is a
necessity to get decent performance), but this is countered with careful coding
as well as standard performance techniques (for example, the comment handling
code is vectorized on X86 and PowerPC hosts).</p>
<p>The lexer has a couple of interesting modal features:</p>
<ul>
<li>The lexer can operate in 'raw' mode. This mode has several features that
make it possible to quickly lex the file (e.g. it stops identifier lookup,
doesn't specially handle preprocessor tokens, handles EOF differently, etc).
This mode is used for lexing within an "<tt>#if 0</tt>" block, for
example.</li>
<li>The lexer can capture and return comments as tokens. This is required to
support the -C preprocessor mode, which passes comments through, and is
used by the diagnostic checker to identifier expect-error annotations.</li>
<li>The lexer can be in ParsingFilename mode, which happens when preprocessing
after reading a #include directive. This mode changes the parsing of '&lt;'
to return an "angled string" instead of a bunch of tokens for each thing
within the filename.</li>
<li>When parsing a preprocessor directive (after "<tt>#</tt>") the
ParsingPreprocessorDirective mode is entered. This changes the parser to
return EOD at a newline.</li>
<li>The Lexer uses a LangOptions object to know whether trigraphs are enabled,
whether C++ or ObjC keywords are recognized, etc.</li>
</ul>
<p>In addition to these modes, the lexer keeps track of a couple of other
features that are local to a lexed buffer, which change as the buffer is
lexed:</p>
<ul>
<li>The Lexer uses BufferPtr to keep track of the current character being
lexed.</li>
<li>The Lexer uses IsAtStartOfLine to keep track of whether the next lexed token
will start with its "start of line" bit set.</li>
<li>The Lexer keeps track of the current #if directives that are active (which
can be nested).</li>
<li>The Lexer keeps track of an <a href="#MultipleIncludeOpt">
MultipleIncludeOpt</a> object, which is used to
detect whether the buffer uses the standard "<tt>#ifndef XX</tt> /
<tt>#define XX</tt>" idiom to prevent multiple inclusion. If a buffer does,
subsequent includes can be ignored if the XX macro is defined.</li>
</ul>
<!-- ======================================================================= -->
<h3 id="TokenLexer">The TokenLexer class</h3>
<!-- ======================================================================= -->
<p>The TokenLexer class is a token provider that returns tokens from a list
of tokens that came from somewhere else. It typically used for two things: 1)
returning tokens from a macro definition as it is being expanded 2) returning
tokens from an arbitrary buffer of tokens. The later use is used by _Pragma and
will most likely be used to handle unbounded look-ahead for the C++ parser.</p>
<!-- ======================================================================= -->
<h3 id="MultipleIncludeOpt">The MultipleIncludeOpt class</h3>
<!-- ======================================================================= -->
<p>The MultipleIncludeOpt class implements a really simple little state machine
that is used to detect the standard "<tt>#ifndef XX</tt> / <tt>#define XX</tt>"
idiom that people typically use to prevent multiple inclusion of headers. If a
buffer uses this idiom and is subsequently #include'd, the preprocessor can
simply check to see whether the guarding condition is defined or not. If so,
the preprocessor can completely ignore the include of the header.</p>
<!-- ======================================================================= -->
<h2 id="libparse">The Parser Library</h2>
<!-- ======================================================================= -->
<!-- ======================================================================= -->
<h2 id="libast">The AST Library</h2>
<!-- ======================================================================= -->
<!-- ======================================================================= -->
<h3 id="Type">The Type class and its subclasses</h3>
<!-- ======================================================================= -->
<p>The Type class (and its subclasses) are an important part of the AST. Types
are accessed through the ASTContext class, which implicitly creates and uniques
them as they are needed. Types have a couple of non-obvious features: 1) they
do not capture type qualifiers like const or volatile (See
<a href="#QualType">QualType</a>), and 2) they implicitly capture typedef
information. Once created, types are immutable (unlike decls).</p>
<p>Typedefs in C make semantic analysis a bit more complex than it would
be without them. The issue is that we want to capture typedef information
and represent it in the AST perfectly, but the semantics of operations need to
"see through" typedefs. For example, consider this code:</p>
<code>
void func() {<br>
&nbsp;&nbsp;typedef int foo;<br>
&nbsp;&nbsp;foo X, *Y;<br>
&nbsp;&nbsp;typedef foo* bar;<br>
&nbsp;&nbsp;bar Z;<br>
&nbsp;&nbsp;*X; <i>// error</i><br>
&nbsp;&nbsp;**Y; <i>// error</i><br>
&nbsp;&nbsp;**Z; <i>// error</i><br>
}<br>
</code>
<p>The code above is illegal, and thus we expect there to be diagnostics emitted
on the annotated lines. In this example, we expect to get:</p>
<pre>
<b>test.c:6:1: error: indirection requires pointer operand ('foo' invalid)</b>
*X; // error
<span style="color:blue">^~</span>
<b>test.c:7:1: error: indirection requires pointer operand ('foo' invalid)</b>
**Y; // error
<span style="color:blue">^~~</span>
<b>test.c:8:1: error: indirection requires pointer operand ('foo' invalid)</b>
**Z; // error
<span style="color:blue">^~~</span>
</pre>
<p>While this example is somewhat silly, it illustrates the point: we want to
retain typedef information where possible, so that we can emit errors about
"<tt>std::string</tt>" instead of "<tt>std::basic_string&lt;char, std:...</tt>".
Doing this requires properly keeping typedef information (for example, the type
of "X" is "foo", not "int"), and requires properly propagating it through the
various operators (for example, the type of *Y is "foo", not "int"). In order
to retain this information, the type of these expressions is an instance of the
TypedefType class, which indicates that the type of these expressions is a
typedef for foo.
</p>
<p>Representing types like this is great for diagnostics, because the
user-specified type is always immediately available. There are two problems
with this: first, various semantic checks need to make judgements about the
<em>actual structure</em> of a type, ignoring typedefs. Second, we need an
efficient way to query whether two types are structurally identical to each
other, ignoring typedefs. The solution to both of these problems is the idea of
canonical types.</p>
<!-- =============== -->
<h4>Canonical Types</h4>
<!-- =============== -->
<p>Every instance of the Type class contains a canonical type pointer. For
simple types with no typedefs involved (e.g. "<tt>int</tt>", "<tt>int*</tt>",
"<tt>int**</tt>"), the type just points to itself. For types that have a
typedef somewhere in their structure (e.g. "<tt>foo</tt>", "<tt>foo*</tt>",
"<tt>foo**</tt>", "<tt>bar</tt>"), the canonical type pointer points to their
structurally equivalent type without any typedefs (e.g. "<tt>int</tt>",
"<tt>int*</tt>", "<tt>int**</tt>", and "<tt>int*</tt>" respectively).</p>
<p>This design provides a constant time operation (dereferencing the canonical
type pointer) that gives us access to the structure of types. For example,
we can trivially tell that "bar" and "foo*" are the same type by dereferencing
their canonical type pointers and doing a pointer comparison (they both point
to the single "<tt>int*</tt>" type).</p>
<p>Canonical types and typedef types bring up some complexities that must be
carefully managed. Specifically, the "isa/cast/dyncast" operators generally
shouldn't be used in code that is inspecting the AST. For example, when type
checking the indirection operator (unary '*' on a pointer), the type checker
must verify that the operand has a pointer type. It would not be correct to
check that with "<tt>isa&lt;PointerType&gt;(SubExpr-&gt;getType())</tt>",
because this predicate would fail if the subexpression had a typedef type.</p>
<p>The solution to this problem are a set of helper methods on Type, used to
check their properties. In this case, it would be correct to use
"<tt>SubExpr-&gt;getType()-&gt;isPointerType()</tt>" to do the check. This
predicate will return true if the <em>canonical type is a pointer</em>, which is
true any time the type is structurally a pointer type. The only hard part here
is remembering not to use the <tt>isa/cast/dyncast</tt> operations.</p>
<p>The second problem we face is how to get access to the pointer type once we
know it exists. To continue the example, the result type of the indirection
operator is the pointee type of the subexpression. In order to determine the
type, we need to get the instance of PointerType that best captures the typedef
information in the program. If the type of the expression is literally a
PointerType, we can return that, otherwise we have to dig through the
typedefs to find the pointer type. For example, if the subexpression had type
"<tt>foo*</tt>", we could return that type as the result. If the subexpression
had type "<tt>bar</tt>", we want to return "<tt>foo*</tt>" (note that we do
<em>not</em> want "<tt>int*</tt>"). In order to provide all of this, Type has
a getAsPointerType() method that checks whether the type is structurally a
PointerType and, if so, returns the best one. If not, it returns a null
pointer.</p>
<p>This structure is somewhat mystical, but after meditating on it, it will
make sense to you :).</p>
<!-- ======================================================================= -->
<h3 id="QualType">The QualType class</h3>
<!-- ======================================================================= -->
<p>The QualType class is designed as a trivial value class that is
small, passed by-value and is efficient to query. The idea of
QualType is that it stores the type qualifiers (const, volatile,
restrict, plus some extended qualifiers required by language
extensions) separately from the types themselves. QualType is
conceptually a pair of "Type*" and the bits for these type qualifiers.</p>
<p>By storing the type qualifiers as bits in the conceptual pair, it is
extremely efficient to get the set of qualifiers on a QualType (just return the
field of the pair), add a type qualifier (which is a trivial constant-time
operation that sets a bit), and remove one or more type qualifiers (just return
a QualType with the bitfield set to empty).</p>
<p>Further, because the bits are stored outside of the type itself, we do not
need to create duplicates of types with different sets of qualifiers (i.e. there
is only a single heap allocated "int" type: "const int" and "volatile const int"
both point to the same heap allocated "int" type). This reduces the heap size
used to represent bits and also means we do not have to consider qualifiers when
uniquing types (<a href="#Type">Type</a> does not even contain qualifiers).</p>
<p>In practice, the two most common type qualifiers (const and
restrict) are stored in the low bits of the pointer to the Type
object, together with a flag indicating whether extended qualifiers
are present (which must be heap-allocated). This means that QualType
is exactly the same size as a pointer.</p>
<!-- ======================================================================= -->
<h3 id="DeclarationName">Declaration names</h3>
<!-- ======================================================================= -->
<p>The <tt>DeclarationName</tt> class represents the name of a
declaration in Clang. Declarations in the C family of languages can
take several different forms. Most declarations are named by
simple identifiers, e.g., "<code>f</code>" and "<code>x</code>" in
the function declaration <code>f(int x)</code>. In C++, declaration
names can also name class constructors ("<code>Class</code>"
in <code>struct Class { Class(); }</code>), class destructors
("<code>~Class</code>"), overloaded operator names ("operator+"),
and conversion functions ("<code>operator void const *</code>"). In
Objective-C, declaration names can refer to the names of Objective-C
methods, which involve the method name and the parameters,
collectively called a <i>selector</i>, e.g.,
"<code>setWidth:height:</code>". Since all of these kinds of
entities - variables, functions, Objective-C methods, C++
constructors, destructors, and operators - are represented as
subclasses of Clang's common <code>NamedDecl</code>
class, <code>DeclarationName</code> is designed to efficiently
represent any kind of name.</p>
<p>Given
a <code>DeclarationName</code> <code>N</code>, <code>N.getNameKind()</code>
will produce a value that describes what kind of name <code>N</code>
stores. There are 8 options (all of the names are inside
the <code>DeclarationName</code> class)</p>
<dl>
<dt>Identifier</dt>
<dd>The name is a simple
identifier. Use <code>N.getAsIdentifierInfo()</code> to retrieve the
corresponding <code>IdentifierInfo*</code> pointing to the actual
identifier. Note that C++ overloaded operators (e.g.,
"<code>operator+</code>") are represented as special kinds of
identifiers. Use <code>IdentifierInfo</code>'s <code>getOverloadedOperatorID</code>
function to determine whether an identifier is an overloaded
operator name.</dd>
<dt>ObjCZeroArgSelector, ObjCOneArgSelector,
ObjCMultiArgSelector</dt>
<dd>The name is an Objective-C selector, which can be retrieved as a
<code>Selector</code> instance
via <code>N.getObjCSelector()</code>. The three possible name
kinds for Objective-C reflect an optimization within
the <code>DeclarationName</code> class: both zero- and
one-argument selectors are stored as a
masked <code>IdentifierInfo</code> pointer, and therefore require
very little space, since zero- and one-argument selectors are far
more common than multi-argument selectors (which use a different
structure).</dd>
<dt>CXXConstructorName</dt>
<dd>The name is a C++ constructor
name. Use <code>N.getCXXNameType()</code> to retrieve
the <a href="#QualType">type</a> that this constructor is meant to
construct. The type is always the canonical type, since all
constructors for a given type have the same name.</dd>
<dt>CXXDestructorName</dt>
<dd>The name is a C++ destructor
name. Use <code>N.getCXXNameType()</code> to retrieve
the <a href="#QualType">type</a> whose destructor is being
named. This type is always a canonical type.</dd>
<dt>CXXConversionFunctionName</dt>
<dd>The name is a C++ conversion function. Conversion functions are
named according to the type they convert to, e.g., "<code>operator void
const *</code>". Use <code>N.getCXXNameType()</code> to retrieve
the type that this conversion function converts to. This type is
always a canonical type.</dd>
<dt>CXXOperatorName</dt>
<dd>The name is a C++ overloaded operator name. Overloaded operators
are named according to their spelling, e.g.,
"<code>operator+</code>" or "<code>operator new
[]</code>". Use <code>N.getCXXOverloadedOperator()</code> to
retrieve the overloaded operator (a value of
type <code>OverloadedOperatorKind</code>).</dd>
</dl>
<p><code>DeclarationName</code>s are cheap to create, copy, and
compare. They require only a single pointer's worth of storage in
the common cases (identifiers, zero-
and one-argument Objective-C selectors) and use dense, uniqued
storage for the other kinds of
names. Two <code>DeclarationName</code>s can be compared for
equality (<code>==</code>, <code>!=</code>) using a simple bitwise
comparison, can be ordered
with <code>&lt;</code>, <code>&gt;</code>, <code>&lt;=</code>,
and <code>&gt;=</code> (which provide a lexicographical ordering for
normal identifiers but an unspecified ordering for other kinds of
names), and can be placed into LLVM <code>DenseMap</code>s
and <code>DenseSet</code>s.</p>
<p><code>DeclarationName</code> instances can be created in different
ways depending on what kind of name the instance will store. Normal
identifiers (<code>IdentifierInfo</code> pointers) and Objective-C selectors
(<code>Selector</code>) can be implicitly converted
to <code>DeclarationName</code>s. Names for C++ constructors,
destructors, conversion functions, and overloaded operators can be retrieved from
the <code>DeclarationNameTable</code>, an instance of which is
available as <code>ASTContext::DeclarationNames</code>. The member
functions <code>getCXXConstructorName</code>, <code>getCXXDestructorName</code>,
<code>getCXXConversionFunctionName</code>, and <code>getCXXOperatorName</code>, respectively,
return <code>DeclarationName</code> instances for the four kinds of
C++ special function names.</p>
<!-- ======================================================================= -->
<h3 id="DeclContext">Declaration contexts</h3>
<!-- ======================================================================= -->
<p>Every declaration in a program exists within some <i>declaration
context</i>, such as a translation unit, namespace, class, or
function. Declaration contexts in Clang are represented by
the <code>DeclContext</code> class, from which the various
declaration-context AST nodes
(<code>TranslationUnitDecl</code>, <code>NamespaceDecl</code>, <code>RecordDecl</code>, <code>FunctionDecl</code>,
etc.) will derive. The <code>DeclContext</code> class provides
several facilities common to each declaration context:</p>
<dl>
<dt>Source-centric vs. Semantics-centric View of Declarations</dt>
<dd><code>DeclContext</code> provides two views of the declarations
stored within a declaration context. The source-centric view
accurately represents the program source code as written, including
multiple declarations of entities where present (see the
section <a href="#Redeclarations">Redeclarations and
Overloads</a>), while the semantics-centric view represents the
program semantics. The two views are kept synchronized by semantic
analysis while the ASTs are being constructed.</dd>
<dt>Storage of declarations within that context</dt>
<dd>Every declaration context can contain some number of
declarations. For example, a C++ class (represented
by <code>RecordDecl</code>) contains various member functions,
fields, nested types, and so on. All of these declarations will be
stored within the <code>DeclContext</code>, and one can iterate
over the declarations via
[<code>DeclContext::decls_begin()</code>,
<code>DeclContext::decls_end()</code>). This mechanism provides
the source-centric view of declarations in the context.</dd>
<dt>Lookup of declarations within that context</dt>
<dd>The <code>DeclContext</code> structure provides efficient name
lookup for names within that declaration context. For example,
if <code>N</code> is a namespace we can look for the
name <code>N::f</code>
using <code>DeclContext::lookup</code>. The lookup itself is
based on a lazily-constructed array (for declaration contexts
with a small number of declarations) or hash table (for
declaration contexts with more declarations). The lookup
operation provides the semantics-centric view of the declarations
in the context.</dd>
<dt>Ownership of declarations</dt>
<dd>The <code>DeclContext</code> owns all of the declarations that
were declared within its declaration context, and is responsible
for the management of their memory as well as their
(de-)serialization.</dd>
</dl>
<p>All declarations are stored within a declaration context, and one
can query
information about the context in which each declaration lives. One
can retrieve the <code>DeclContext</code> that contains a
particular <code>Decl</code>
using <code>Decl::getDeclContext</code>. However, see the
section <a href="#LexicalAndSemanticContexts">Lexical and Semantic
Contexts</a> for more information about how to interpret this
context information.</p>
<h4 id="Redeclarations">Redeclarations and Overloads</h4>
<p>Within a translation unit, it is common for an entity to be
declared several times. For example, we might declare a function "f"
and then later re-declare it as part of an inlined definition:</p>
<pre>
void f(int x, int y, int z = 1);
inline void f(int x, int y, int z) { /* ... */ }
</pre>
<p>The representation of "f" differs in the source-centric and
semantics-centric views of a declaration context. In the
source-centric view, all redeclarations will be present, in the
order they occurred in the source code, making
this view suitable for clients that wish to see the structure of
the source code. In the semantics-centric view, only the most recent "f"
will be found by the lookup, since it effectively replaces the first
declaration of "f".</p>
<p>In the semantics-centric view, overloading of functions is
represented explicitly. For example, given two declarations of a
function "g" that are overloaded, e.g.,</p>
<pre>
void g();
void g(int);
</pre>
<p>the <code>DeclContext::lookup</code> operation will return
a <code>DeclContext::lookup_result</code> that contains a range of iterators
over declarations of "g". Clients that perform semantic analysis on a
program that is not concerned with the actual source code will
primarily use this semantics-centric view.</p>
<h4 id="LexicalAndSemanticContexts">Lexical and Semantic Contexts</h4>
<p>Each declaration has two potentially different
declaration contexts: a <i>lexical</i> context, which corresponds to
the source-centric view of the declaration context, and
a <i>semantic</i> context, which corresponds to the
semantics-centric view. The lexical context is accessible
via <code>Decl::getLexicalDeclContext</code> while the
semantic context is accessible
via <code>Decl::getDeclContext</code>, both of which return
<code>DeclContext</code> pointers. For most declarations, the two
contexts are identical. For example:</p>
<pre>
class X {
public:
void f(int x);
};
</pre>
<p>Here, the semantic and lexical contexts of <code>X::f</code> are
the <code>DeclContext</code> associated with the
class <code>X</code> (itself stored as a <code>RecordDecl</code> AST
node). However, we can now define <code>X::f</code> out-of-line:</p>
<pre>
void X::f(int x = 17) { /* ... */ }
</pre>
<p>This definition of has different lexical and semantic
contexts. The lexical context corresponds to the declaration
context in which the actual declaration occurred in the source
code, e.g., the translation unit containing <code>X</code>. Thus,
this declaration of <code>X::f</code> can be found by traversing
the declarations provided by
[<code>decls_begin()</code>, <code>decls_end()</code>) in the
translation unit.</p>
<p>The semantic context of <code>X::f</code> corresponds to the
class <code>X</code>, since this member function is (semantically) a
member of <code>X</code>. Lookup of the name <code>f</code> into
the <code>DeclContext</code> associated with <code>X</code> will
then return the definition of <code>X::f</code> (including
information about the default argument).</p>
<h4 id="TransparentContexts">Transparent Declaration Contexts</h4>
<p>In C and C++, there are several contexts in which names that are
logically declared inside another declaration will actually "leak"
out into the enclosing scope from the perspective of name
lookup. The most obvious instance of this behavior is in
enumeration types, e.g.,</p>
<pre>
enum Color {
Red,
Green,
Blue
};
</pre>
<p>Here, <code>Color</code> is an enumeration, which is a declaration
context that contains the
enumerators <code>Red</code>, <code>Green</code>,
and <code>Blue</code>. Thus, traversing the list of declarations
contained in the enumeration <code>Color</code> will
yield <code>Red</code>, <code>Green</code>,
and <code>Blue</code>. However, outside of the scope
of <code>Color</code> one can name the enumerator <code>Red</code>
without qualifying the name, e.g.,</p>
<pre>
Color c = Red;
</pre>
<p>There are other entities in C++ that provide similar behavior. For
example, linkage specifications that use curly braces:</p>
<pre>
extern "C" {
void f(int);
void g(int);
}
// f and g are visible here
</pre>
<p>For source-level accuracy, we treat the linkage specification and
enumeration type as a
declaration context in which its enclosed declarations ("Red",
"Green", and "Blue"; "f" and "g")
are declared. However, these declarations are visible outside of the
scope of the declaration context.</p>
<p>These language features (and several others, described below) have
roughly the same set of
requirements: declarations are declared within a particular lexical
context, but the declarations are also found via name lookup in
scopes enclosing the declaration itself. This feature is implemented
via <i>transparent</i> declaration contexts
(see <code>DeclContext::isTransparentContext()</code>), whose
declarations are visible in the nearest enclosing non-transparent
declaration context. This means that the lexical context of the
declaration (e.g., an enumerator) will be the
transparent <code>DeclContext</code> itself, as will the semantic
context, but the declaration will be visible in every outer context
up to and including the first non-transparent declaration context (since
transparent declaration contexts can be nested).</p>
<p>The transparent <code>DeclContexts</code> are:</p>
<ul>
<li>Enumerations (but not C++11 "scoped enumerations"):
<pre>
enum Color {
Red,
Green,
Blue
};
// Red, Green, and Blue are in scope
</pre></li>
<li>C++ linkage specifications:
<pre>
extern "C" {
void f(int);
void g(int);
}
// f and g are in scope
</pre></li>
<li>Anonymous unions and structs:
<pre>
struct LookupTable {
bool IsVector;
union {
std::vector&lt;Item&gt; *Vector;
std::set&lt;Item&gt; *Set;
};
};
LookupTable LT;
LT.Vector = 0; // Okay: finds Vector inside the unnamed union
</pre>
</li>
<li>C++11 inline namespaces:
<pre>
namespace mylib {
inline namespace debug {
class X;
}
}
mylib::X *xp; // okay: mylib::X refers to mylib::debug::X
</pre>
</li>
</ul>
<h4 id="MultiDeclContext">Multiply-Defined Declaration Contexts</h4>
<p>C++ namespaces have the interesting--and, so far, unique--property that
the namespace can be defined multiple times, and the declarations
provided by each namespace definition are effectively merged (from
the semantic point of view). For example, the following two code
snippets are semantically indistinguishable:</p>
<pre>
// Snippet #1:
namespace N {
void f();
}
namespace N {
void f(int);
}
// Snippet #2:
namespace N {
void f();
void f(int);
}
</pre>
<p>In Clang's representation, the source-centric view of declaration
contexts will actually have two separate <code>NamespaceDecl</code>
nodes in Snippet #1, each of which is a declaration context that
contains a single declaration of "f". However, the semantics-centric
view provided by name lookup into the namespace <code>N</code> for
"f" will return a <code>DeclContext::lookup_result</code> that contains
a range of iterators over declarations of "f".</p>
<p><code>DeclContext</code> manages multiply-defined declaration
contexts internally. The
function <code>DeclContext::getPrimaryContext</code> retrieves the
"primary" context for a given <code>DeclContext</code> instance,
which is the <code>DeclContext</code> responsible for maintaining
the lookup table used for the semantics-centric view. Given the
primary context, one can follow the chain
of <code>DeclContext</code> nodes that define additional
declarations via <code>DeclContext::getNextContext</code>. Note that
these functions are used internally within the lookup and insertion
methods of the <code>DeclContext</code>, so the vast majority of
clients can ignore them.</p>
<!-- ======================================================================= -->
<h3 id="CFG">The <tt>CFG</tt> class</h3>
<!-- ======================================================================= -->
<p>The <tt>CFG</tt> class is designed to represent a source-level
control-flow graph for a single statement (<tt>Stmt*</tt>). Typically
instances of <tt>CFG</tt> are constructed for function bodies (usually
an instance of <tt>CompoundStmt</tt>), but can also be instantiated to
represent the control-flow of any class that subclasses <tt>Stmt</tt>,
which includes simple expressions. Control-flow graphs are especially
useful for performing
<a href="http://en.wikipedia.org/wiki/Data_flow_analysis#Sensitivities">flow-
or path-sensitive</a> program analyses on a given function.</p>
<!-- ============ -->
<h4>Basic Blocks</h4>
<!-- ============ -->
<p>Concretely, an instance of <tt>CFG</tt> is a collection of basic
blocks. Each basic block is an instance of <tt>CFGBlock</tt>, which
simply contains an ordered sequence of <tt>Stmt*</tt> (each referring
to statements in the AST). The ordering of statements within a block
indicates unconditional flow of control from one statement to the
next. <a href="#ConditionalControlFlow">Conditional control-flow</a>
is represented using edges between basic blocks. The statements
within a given <tt>CFGBlock</tt> can be traversed using
the <tt>CFGBlock::*iterator</tt> interface.</p>
<p>
A <tt>CFG</tt> object owns the instances of <tt>CFGBlock</tt> within
the control-flow graph it represents. Each <tt>CFGBlock</tt> within a
CFG is also uniquely numbered (accessible
via <tt>CFGBlock::getBlockID()</tt>). Currently the number is
based on the ordering the blocks were created, but no assumptions
should be made on how <tt>CFGBlock</tt>s are numbered other than their
numbers are unique and that they are numbered from 0..N-1 (where N is
the number of basic blocks in the CFG).</p>
<!-- ===================== -->
<h4>Entry and Exit Blocks</h4>
<!-- ===================== -->
Each instance of <tt>CFG</tt> contains two special blocks:
an <i>entry</i> block (accessible via <tt>CFG::getEntry()</tt>), which
has no incoming edges, and an <i>exit</i> block (accessible
via <tt>CFG::getExit()</tt>), which has no outgoing edges. Neither
block contains any statements, and they serve the role of providing a
clear entrance and exit for a body of code such as a function body.
The presence of these empty blocks greatly simplifies the
implementation of many analyses built on top of CFGs.
<!-- ===================================================== -->
<h4 id ="ConditionalControlFlow">Conditional Control-Flow</h4>
<!-- ===================================================== -->
<p>Conditional control-flow (such as those induced by if-statements
and loops) is represented as edges between <tt>CFGBlock</tt>s.
Because different C language constructs can induce control-flow,
each <tt>CFGBlock</tt> also records an extra <tt>Stmt*</tt> that
represents the <i>terminator</i> of the block. A terminator is simply
the statement that caused the control-flow, and is used to identify
the nature of the conditional control-flow between blocks. For
example, in the case of an if-statement, the terminator refers to
the <tt>IfStmt</tt> object in the AST that represented the given
branch.</p>
<p>To illustrate, consider the following code example:</p>
<code>
int foo(int x) {<br>
&nbsp;&nbsp;x = x + 1;<br>
<br>
&nbsp;&nbsp;if (x > 2) x++;<br>
&nbsp;&nbsp;else {<br>
&nbsp;&nbsp;&nbsp;&nbsp;x += 2;<br>
&nbsp;&nbsp;&nbsp;&nbsp;x *= 2;<br>
&nbsp;&nbsp;}<br>
<br>
&nbsp;&nbsp;return x;<br>
}
</code>
<p>After invoking the parser+semantic analyzer on this code fragment,
the AST of the body of <tt>foo</tt> is referenced by a
single <tt>Stmt*</tt>. We can then construct an instance
of <tt>CFG</tt> representing the control-flow graph of this function
body by single call to a static class method:</p>
<code>
&nbsp;&nbsp;Stmt* FooBody = ...<br>
&nbsp;&nbsp;CFG* FooCFG = <b>CFG::buildCFG</b>(FooBody);
</code>
<p>It is the responsibility of the caller of <tt>CFG::buildCFG</tt>
to <tt>delete</tt> the returned <tt>CFG*</tt> when the CFG is no
longer needed.</p>
<p>Along with providing an interface to iterate over
its <tt>CFGBlock</tt>s, the <tt>CFG</tt> class also provides methods
that are useful for debugging and visualizing CFGs. For example, the
method
<tt>CFG::dump()</tt> dumps a pretty-printed version of the CFG to
standard error. This is especially useful when one is using a
debugger such as gdb. For example, here is the output
of <tt>FooCFG->dump()</tt>:</p>
<code>
&nbsp;[ B5 (ENTRY) ]<br>
&nbsp;&nbsp;&nbsp;&nbsp;Predecessors (0):<br>
&nbsp;&nbsp;&nbsp;&nbsp;Successors (1): B4<br>
<br>
&nbsp;[ B4 ]<br>
&nbsp;&nbsp;&nbsp;&nbsp;1: x = x + 1<br>
&nbsp;&nbsp;&nbsp;&nbsp;2: (x > 2)<br>
&nbsp;&nbsp;&nbsp;&nbsp;<b>T: if [B4.2]</b><br>
&nbsp;&nbsp;&nbsp;&nbsp;Predecessors (1): B5<br>
&nbsp;&nbsp;&nbsp;&nbsp;Successors (2): B3 B2<br>
<br>
&nbsp;[ B3 ]<br>
&nbsp;&nbsp;&nbsp;&nbsp;1: x++<br>
&nbsp;&nbsp;&nbsp;&nbsp;Predecessors (1): B4<br>
&nbsp;&nbsp;&nbsp;&nbsp;Successors (1): B1<br>
<br>
&nbsp;[ B2 ]<br>
&nbsp;&nbsp;&nbsp;&nbsp;1: x += 2<br>
&nbsp;&nbsp;&nbsp;&nbsp;2: x *= 2<br>
&nbsp;&nbsp;&nbsp;&nbsp;Predecessors (1): B4<br>
&nbsp;&nbsp;&nbsp;&nbsp;Successors (1): B1<br>
<br>
&nbsp;[ B1 ]<br>
&nbsp;&nbsp;&nbsp;&nbsp;1: return x;<br>
&nbsp;&nbsp;&nbsp;&nbsp;Predecessors (2): B2 B3<br>
&nbsp;&nbsp;&nbsp;&nbsp;Successors (1): B0<br>
<br>
&nbsp;[ B0 (EXIT) ]<br>
&nbsp;&nbsp;&nbsp;&nbsp;Predecessors (1): B1<br>
&nbsp;&nbsp;&nbsp;&nbsp;Successors (0):
</code>
<p>For each block, the pretty-printed output displays for each block
the number of <i>predecessor</i> blocks (blocks that have outgoing
control-flow to the given block) and <i>successor</i> blocks (blocks
that have control-flow that have incoming control-flow from the given
block). We can also clearly see the special entry and exit blocks at
the beginning and end of the pretty-printed output. For the entry
block (block B5), the number of predecessor blocks is 0, while for the
exit block (block B0) the number of successor blocks is 0.</p>
<p>The most interesting block here is B4, whose outgoing control-flow
represents the branching caused by the sole if-statement
in <tt>foo</tt>. Of particular interest is the second statement in
the block, <b><tt>(x > 2)</tt></b>, and the terminator, printed
as <b><tt>if [B4.2]</tt></b>. The second statement represents the
evaluation of the condition of the if-statement, which occurs before
the actual branching of control-flow. Within the <tt>CFGBlock</tt>
for B4, the <tt>Stmt*</tt> for the second statement refers to the
actual expression in the AST for <b><tt>(x > 2)</tt></b>. Thus
pointers to subclasses of <tt>Expr</tt> can appear in the list of
statements in a block, and not just subclasses of <tt>Stmt</tt> that
refer to proper C statements.</p>
<p>The terminator of block B4 is a pointer to the <tt>IfStmt</tt>
object in the AST. The pretty-printer outputs <b><tt>if
[B4.2]</tt></b> because the condition expression of the if-statement
has an actual place in the basic block, and thus the terminator is
essentially
<i>referring</i> to the expression that is the second statement of
block B4 (i.e., B4.2). In this manner, conditions for control-flow
(which also includes conditions for loops and switch statements) are
hoisted into the actual basic block.</p>
<!-- ===================== -->
<!-- <h4>Implicit Control-Flow</h4> -->
<!-- ===================== -->
<!--
<p>A key design principle of the <tt>CFG</tt> class was to not require
any transformations to the AST in order to represent control-flow.
Thus the <tt>CFG</tt> does not perform any "lowering" of the
statements in an AST: loops are not transformed into guarded gotos,
short-circuit operations are not converted to a set of if-statements,
and so on.</p>
-->
<!-- ======================================================================= -->
<h3 id="Constants">Constant Folding in the Clang AST</h3>
<!-- ======================================================================= -->
<p>There are several places where constants and constant folding matter a lot to
the Clang front-end. First, in general, we prefer the AST to retain the source
code as close to how the user wrote it as possible. This means that if they
wrote "5+4", we want to keep the addition and two constants in the AST, we don't
want to fold to "9". This means that constant folding in various ways turns
into a tree walk that needs to handle the various cases.</p>
<p>However, there are places in both C and C++ that require constants to be
folded. For example, the C standard defines what an "integer constant
expression" (i-c-e) is with very precise and specific requirements. The
language then requires i-c-e's in a lot of places (for example, the size of a
bitfield, the value for a case statement, etc). For these, we have to be able
to constant fold the constants, to do semantic checks (e.g. verify bitfield size
is non-negative and that case statements aren't duplicated). We aim for Clang
to be very pedantic about this, diagnosing cases when the code does not use an
i-c-e where one is required, but accepting the code unless running with
<tt>-pedantic-errors</tt>.</p>
<p>Things get a little bit more tricky when it comes to compatibility with
real-world source code. Specifically, GCC has historically accepted a huge
superset of expressions as i-c-e's, and a lot of real world code depends on this
unfortuate accident of history (including, e.g., the glibc system headers). GCC
accepts anything its "fold" optimizer is capable of reducing to an integer
constant, which means that the definition of what it accepts changes as its
optimizer does. One example is that GCC accepts things like "case X-X:" even
when X is a variable, because it can fold this to 0.</p>
<p>Another issue are how constants interact with the extensions we support, such
as __builtin_constant_p, __builtin_inf, __extension__ and many others. C99
obviously does not specify the semantics of any of these extensions, and the
definition of i-c-e does not include them. However, these extensions are often
used in real code, and we have to have a way to reason about them.</p>
<p>Finally, this is not just a problem for semantic analysis. The code
generator and other clients have to be able to fold constants (e.g. to
initialize global variables) and has to handle a superset of what C99 allows.
Further, these clients can benefit from extended information. For example, we
know that "foo()||1" always evaluates to true, but we can't replace the
expression with true because it has side effects.</p>
<!-- ======================= -->
<h4>Implementation Approach</h4>
<!-- ======================= -->
<p>After trying several different approaches, we've finally converged on a
design (Note, at the time of this writing, not all of this has been implemented,
consider this a design goal!). Our basic approach is to define a single
recursive method evaluation method (<tt>Expr::Evaluate</tt>), which is
implemented in <tt>AST/ExprConstant.cpp</tt>. Given an expression with 'scalar'
type (integer, fp, complex, or pointer) this method returns the following
information:</p>
<ul>
<li>Whether the expression is an integer constant expression, a general
constant that was folded but has no side effects, a general constant that
was folded but that does have side effects, or an uncomputable/unfoldable
value.
</li>
<li>If the expression was computable in any way, this method returns the APValue
for the result of the expression.</li>
<li>If the expression is not evaluatable at all, this method returns
information on one of the problems with the expression. This includes a
SourceLocation for where the problem is, and a diagnostic ID that explains
the problem. The diagnostic should be have ERROR type.</li>
<li>If the expression is not an integer constant expression, this method returns
information on one of the problems with the expression. This includes a
SourceLocation for where the problem is, and a diagnostic ID that explains
the problem. The diagnostic should be have EXTENSION type.</li>
</ul>
<p>This information gives various clients the flexibility that they want, and we
will eventually have some helper methods for various extensions. For example,
Sema should have a <tt>Sema::VerifyIntegerConstantExpression</tt> method, which
calls Evaluate on the expression. If the expression is not foldable, the error
is emitted, and it would return true. If the expression is not an i-c-e, the
EXTENSION diagnostic is emitted. Finally it would return false to indicate that
the AST is ok.</p>
<p>Other clients can use the information in other ways, for example, codegen can
just use expressions that are foldable in any way.</p>
<!-- ========== -->
<h4>Extensions</h4>
<!-- ========== -->
<p>This section describes how some of the various extensions Clang supports
interacts with constant evaluation:</p>
<ul>
<li><b><tt>__extension__</tt></b>: The expression form of this extension causes
any evaluatable subexpression to be accepted as an integer constant
expression.</li>
<li><b><tt>__builtin_constant_p</tt></b>: This returns true (as an integer
constant expression) if the operand evaluates to either a numeric value
(that is, not a pointer cast to integral type) of integral, enumeration,
floating or complex type, or if it evaluates to the address of the first
character of a string literal (possibly cast to some other type). As a
special case, if <tt>__builtin_constant_p</tt> is the (potentially
parenthesized) condition of a conditional operator expression ("?:"), only
the true side of the conditional operator is considered, and it is evaluated
with full constant folding.</li>
<li><b><tt>__builtin_choose_expr</tt></b>: The condition is required to be an
integer constant expression, but we accept any constant as an "extension of
an extension". This only evaluates one operand depending on which way the
condition evaluates.</li>
<li><b><tt>__builtin_classify_type</tt></b>: This always returns an integer
constant expression.</li>
<li><b><tt>__builtin_inf,nan,..</tt></b>: These are treated just like a
floating-point literal.</li>
<li><b><tt>__builtin_abs,copysign,..</tt></b>: These are constant folded as
general constant expressions.</li>
<li><b><tt>__builtin_strlen</tt></b> and <b><tt>strlen</tt></b>: These are
constant folded as integer constant expressions if the argument is a string
literal.</li>
</ul>
<!-- ======================================================================= -->
<h2 id="Howtos">How to change Clang</h2>
<!-- ======================================================================= -->
<!-- ======================================================================= -->
<h3 id="AddingAttributes">How to add an attribute</h3>
<!-- ======================================================================= -->
<p>To add an attribute, you'll have to add it to the list of attributes, add it
to the parsing phase, and look for it in the AST scan.
<a href="http://llvm.org/viewvc/llvm-project?view=rev&amp;revision=124217">r124217</a>
has a good example of adding a warning attribute.</p>
<p>(Beware that this hasn't been reviewed/fixed by the people who designed the
attributes system yet.)</p>
<h4><a
href="http://llvm.org/viewvc/llvm-project/cfe/trunk/include/clang/Basic/Attr.td?view=markup">include/clang/Basic/Attr.td</a></h4>
<p>Each attribute gets a <tt>def</tt> inheriting from <tt>Attr</tt> or one of
its subclasses. <tt>InheritableAttr</tt> means that the attribute also applies
to subsequent declarations of the same name.</p>
<p><tt>Spellings</tt> lists the strings that can appear in
<tt>__attribute__((here))</tt> or <tt>[[here]]</tt>. All such strings
will be synonymous. If you want to allow the <tt>[[]]</tt> C++11
syntax, you have to define a list of <tt>Namespaces</tt>, which will
let users write <tt>[[namespace:spelling]]</tt>. Using the empty
string for a namespace will allow users to write just the spelling
with no "<tt>:</tt>".</p>
<p><tt>Subjects</tt> restricts what kinds of AST node to which this attribute
can appertain (roughly, attach).</p>
<p><tt>Args</tt> names the arguments the attribute takes, in order. If
<tt>Args</tt> is <tt>[StringArgument&lt;"Arg1">, IntArgument&lt;"Arg2">]</tt>
then <tt>__attribute__((myattribute("Hello", 3)))</tt> will be a valid use.</p>
<h4>Boilerplate</h4>
<p>Write a new <tt>HandleYourAttr()</tt> function in <a
href="http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Sema/SemaDeclAttr.cpp?view=markup">lib/Sema/SemaDeclAttr.cpp</a>,
and add a case to the switch in <tt>ProcessNonInheritableDeclAttr()</tt> or
<tt>ProcessInheritableDeclAttr()</tt> forwarding to it.</p>
<p>If your attribute causes extra warnings to fire, define a <tt>DiagGroup</tt>
in <a
href="http://llvm.org/viewvc/llvm-project/cfe/trunk/include/clang/Basic/DiagnosticGroups.td?view=markup">include/clang/Basic/DiagnosticGroups.td</a>
named after the attribute's <tt>Spelling</tt> with "_"s replaced by "-"s. If
you're only defining one diagnostic, you can skip <tt>DiagnosticGroups.td</tt>
and use <tt>InGroup&lt;DiagGroup&lt;"your-attribute">></tt> directly in <a
href="http://llvm.org/viewvc/llvm-project/cfe/trunk/include/clang/Basic/DiagnosticSemaKinds.td?view=markup">DiagnosticSemaKinds.td</a></p>
<h4>The meat of your attribute</h4>
<p>Find an appropriate place in Clang to do whatever your attribute needs to do.
Check for the attribute's presence using <tt>Decl::getAttr&lt;YourAttr>()</tt>.</p>
<p>Update the <a href="LanguageExtensions.html">Clang Language Extensions</a>
document to describe your new attribute.</p>
<!-- ======================================================================= -->
<h3 id="AddingExprStmt">How to add an expression or statement</h3>
<!-- ======================================================================= -->
<p>Expressions and statements are one of the most fundamental constructs within a
compiler, because they interact with many different parts of the AST,
semantic analysis, and IR generation. Therefore, adding a new
expression or statement kind into Clang requires some care. The following list
details the various places in Clang where an expression or statement needs to be
introduced, along with patterns to follow to ensure that the new
expression or statement works well across all of the C languages. We
focus on expressions, but statements are similar.</p>
<ol>
<li>Introduce parsing actions into the parser. Recursive-descent
parsing is mostly self-explanatory, but there are a few things that
are worth keeping in mind:
<ul>
<li>Keep as much source location information as possible! You'll
want it later to produce great diagnostics and support Clang's
various features that map between source code and the AST.</li>
<li>Write tests for all of the "bad" parsing cases, to make sure
your recovery is good. If you have matched delimiters (e.g.,
parentheses, square brackets, etc.), use
<tt>Parser::BalancedDelimiterTracker</tt> to give nice diagnostics when
things go wrong.</li>
</ul>
</li>
<li>Introduce semantic analysis actions into <tt>Sema</tt>. Semantic
analysis should always involve two functions: an <tt>ActOnXXX</tt>
function that will be called directly from the parser, and a
<tt>BuildXXX</tt> function that performs the actual semantic
analysis and will (eventually!) build the AST node. It's fairly
common for the <tt>ActOnCXX</tt> function to do very little (often
just some minor translation from the parser's representation to
<tt>Sema</tt>'s representation of the same thing), but the separation
is still important: C++ template instantiation, for example,
should always call the <tt>BuildXXX</tt> variant. Several notes on
semantic analysis before we get into construction of the AST:
<ul>
<li>Your expression probably involves some types and some
subexpressions. Make sure to fully check that those types, and the
types of those subexpressions, meet your expectations. Add
implicit conversions where necessary to make sure that all of the
types line up exactly the way you want them. Write extensive tests
to check that you're getting good diagnostics for mistakes and
that you can use various forms of subexpressions with your
expression.</li>
<li>When type-checking a type or subexpression, make sure to first
check whether the type is "dependent"
(<tt>Type::isDependentType()</tt>) or whether a subexpression is
type-dependent (<tt>Expr::isTypeDependent()</tt>). If any of these
return true, then you're inside a template and you can't do much
type-checking now. That's normal, and your AST node (when you get
there) will have to deal with this case. At this point, you can
write tests that use your expression within templates, but don't
try to instantiate the templates.</li>
<li>For each subexpression, be sure to call
<tt>Sema::CheckPlaceholderExpr()</tt> to deal with "weird"
expressions that don't behave well as subexpressions. Then,
determine whether you need to perform
lvalue-to-rvalue conversions
(<tt>Sema::DefaultLvalueConversion</tt>e) or
the usual unary conversions
(<tt>Sema::UsualUnaryConversions</tt>), for places where the
subexpression is producing a value you intend to use.</li>
<li>Your <tt>BuildXXX</tt> function will probably just return
<tt>ExprError()</tt> at this point, since you don't have an AST.
That's perfectly fine, and shouldn't impact your testing.</li>
</ul>
</li>
<li>Introduce an AST node for your new expression. This starts with
declaring the node in <tt>include/Basic/StmtNodes.td</tt> and
creating a new class for your expression in the appropriate
<tt>include/AST/Expr*.h</tt> header. It's best to look at the class
for a similar expression to get ideas, and there are some specific
things to watch for:
<ul>
<li>If you need to allocate memory, use the <tt>ASTContext</tt>
allocator to allocate memory. Never use raw <tt>malloc</tt> or
<tt>new</tt>, and never hold any resources in an AST node, because
the destructor of an AST node is never called.</li>
<li>Make sure that <tt>getSourceRange()</tt> covers the exact
source range of your expression. This is needed for diagnostics
and for IDE support.</li>
<li>Make sure that <tt>children()</tt> visits all of the
subexpressions. This is important for a number of features (e.g., IDE
support, C++ variadic templates). If you have sub-types, you'll
also need to visit those sub-types in the
<tt>RecursiveASTVisitor</tt>.</li>
<li>Add printing support (<tt>StmtPrinter.cpp</tt>) and dumping
support (<tt>StmtDumper.cpp</tt>) for your expression.</li>
<li>Add profiling support (<tt>StmtProfile.cpp</tt>) for your AST
node, noting the distinguishing (non-source location)
characteristics of an instance of your expression. Omitting this
step will lead to hard-to-diagnose failures regarding matching of
template declarations.</li>
</ul>
</li>
<li>Teach semantic analysis to build your AST node! At this point,
you can wire up your <tt>Sema::BuildXXX</tt> function to actually
create your AST. A few things to check at this point:
<ul>
<li>If your expression can construct a new C++ class or return a
new Objective-C object, be sure to update and then call
<tt>Sema::MaybeBindToTemporary</tt> for your just-created AST node
to be sure that the object gets properly destructed. An easy way
to test this is to return a C++ class with a private destructor:
semantic analysis should flag an error here with the attempt to
call the destructor.</li>
<li>Inspect the generated AST by printing it using <tt>clang -cc1
-ast-print</tt>, to make sure you're capturing all of the
important information about how the AST was written.</li>
<li>Inspect the generated AST under <tt>clang -cc1 -ast-dump</tt>
to verify that all of the types in the generated AST line up the
way you want them. Remember that clients of the AST should never
have to "think" to understand what's going on. For example, all
implicit conversions should show up explicitly in the AST.</li>
<li>Write tests that use your expression as a subexpression of
other, well-known expressions. Can you call a function using your
expression as an argument? Can you use the ternary operator?</li>
</ul>
</li>
<li>Teach code generation to create IR to your AST node. This step
is the first (and only) that requires knowledge of LLVM IR. There
are several things to keep in mind:
<ul>
<li>Code generation is separated into scalar/aggregate/complex and
lvalue/rvalue paths, depending on what kind of result your
expression produces. On occasion, this requires some careful
factoring of code to avoid duplication.</li>
<li><tt>CodeGenFunction</tt> contains functions
<tt>ConvertType</tt> and <tt>ConvertTypeForMem</tt> that convert
Clang's types (<tt>clang::Type*</tt> or <tt>clang::QualType</tt>)
to LLVM types.
Use the former for values, and the later for memory locations:
test with the C++ "bool" type to check this. If you find
that you are having to use LLVM bitcasts to make
the subexpressions of your expression have the type that your
expression expects, STOP! Go fix semantic analysis and the AST so
that you don't need these bitcasts.</li>
<li>The <tt>CodeGenFunction</tt> class has a number of helper
functions to make certain operations easy, such as generating code
to produce an lvalue or an rvalue, or to initialize a memory
location with a given value. Prefer to use these functions rather
than directly writing loads and stores, because these functions
take care of some of the tricky details for you (e.g., for
exceptions).</li>
<li>If your expression requires some special behavior in the event
of an exception, look at the <tt>push*Cleanup</tt> functions in
<tt>CodeGenFunction</tt> to introduce a cleanup. You shouldn't
have to deal with exception-handling directly.</li>
<li>Testing is extremely important in IR generation. Use <tt>clang
-cc1 -emit-llvm</tt> and <a
href="http://llvm.org/cmds/FileCheck.html">FileCheck</a> to verify
that you're generating the right IR.</li>
</ul>
</li>
<li>Teach template instantiation how to cope with your AST
node, which requires some fairly simple code:
<ul>
<li>Make sure that your expression's constructor properly
computes the flags for type dependence (i.e., the type your
expression produces can change from one instantiation to the
next), value dependence (i.e., the constant value your expression
produces can change from one instantiation to the next),
instantiation dependence (i.e., a template parameter occurs
anywhere in your expression), and whether your expression contains
a parameter pack (for variadic templates). Often, computing these
flags just means combining the results from the various types and
subexpressions.</li>
<li>Add <tt>TransformXXX</tt> and <tt>RebuildXXX</tt> functions to
the
<tt>TreeTransform</tt> class template in <tt>Sema</tt>.
<tt>TransformXXX</tt> should (recursively) transform all of the
subexpressions and types
within your expression, using <tt>getDerived().TransformYYY</tt>.
If all of the subexpressions and types transform without error, it
will then call the <tt>RebuildXXX</tt> function, which will in
turn call <tt>getSema().BuildXXX</tt> to perform semantic analysis
and build your expression.</li>
<li>To test template instantiation, take those tests you wrote to
make sure that you were type checking with type-dependent
expressions and dependent types (from step #2) and instantiate
those templates with various types, some of which type-check and
some that don't, and test the error messages in each case.</li>
</ul>
</li>
<li>There are some "extras" that make other features work better.
It's worth handling these extras to give your expression complete
integration into Clang:
<ul>
<li>Add code completion support for your expression in
<tt>SemaCodeComplete.cpp</tt>.</li>
<li>If your expression has types in it, or has any "interesting"
features other than subexpressions, extend libclang's
<tt>CursorVisitor</tt> to provide proper visitation for your
expression, enabling various IDE features such as syntax
highlighting, cross-referencing, and so on. The
<tt>c-index-test</tt> helper program can be used to test these
features.</li>
</ul>
</li>
</ol>
</div>
</body>
</html>