| /*************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al. |
| * |
| * This software is licensed as described in the file COPYING, which |
| * you should have received as part of this distribution. The terms |
| * are also available at http://curl.haxx.se/docs/copyright.html. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the COPYING file. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ***************************************************************************/ |
| |
| #include "curl_setup.h" |
| |
| #ifdef HAVE_NETINET_IN_H |
| #include <netinet/in.h> |
| #endif |
| #ifdef HAVE_NETDB_H |
| #include <netdb.h> |
| #endif |
| #ifdef HAVE_ARPA_INET_H |
| #include <arpa/inet.h> |
| #endif |
| #ifdef __VMS |
| #include <in.h> |
| #include <inet.h> |
| #endif |
| |
| #ifdef HAVE_PROCESS_H |
| #include <process.h> |
| #endif |
| |
| #include "urldata.h" |
| #include "sendf.h" |
| #include "hostip.h" |
| #include "hash.h" |
| #include "share.h" |
| #include "strerror.h" |
| #include "url.h" |
| #include "inet_pton.h" |
| #include "connect.h" |
| #include "curl_printf.h" |
| #include "curl_memory.h" |
| /* The last #include file should be: */ |
| #include "memdebug.h" |
| |
| /*********************************************************************** |
| * Only for IPv6-enabled builds |
| **********************************************************************/ |
| #ifdef CURLRES_IPV6 |
| |
| |
| #if defined(CURLDEBUG) && defined(HAVE_GETNAMEINFO) |
| /* These are strictly for memory tracing and are using the same style as the |
| * family otherwise present in memdebug.c. I put these ones here since they |
| * require a bunch of structs I didn't want to include in memdebug.c |
| */ |
| |
| /* |
| * For CURLRES_ARS, this should be written using ares_gethostbyaddr() |
| * (ignoring the fact c-ares doesn't return 'serv'). |
| */ |
| |
| int curl_dogetnameinfo(GETNAMEINFO_QUAL_ARG1 GETNAMEINFO_TYPE_ARG1 sa, |
| GETNAMEINFO_TYPE_ARG2 salen, |
| char *host, GETNAMEINFO_TYPE_ARG46 hostlen, |
| char *serv, GETNAMEINFO_TYPE_ARG46 servlen, |
| GETNAMEINFO_TYPE_ARG7 flags, |
| int line, const char *source) |
| { |
| int res = (getnameinfo)(sa, salen, |
| host, hostlen, |
| serv, servlen, |
| flags); |
| if(0 == res) |
| /* success */ |
| curl_memlog("GETNAME %s:%d getnameinfo()\n", |
| source, line); |
| else |
| curl_memlog("GETNAME %s:%d getnameinfo() failed = %d\n", |
| source, line, res); |
| return res; |
| } |
| #endif /* defined(CURLDEBUG) && defined(HAVE_GETNAMEINFO) */ |
| |
| /* |
| * Curl_ipv6works() returns TRUE if IPv6 seems to work. |
| */ |
| bool Curl_ipv6works(void) |
| { |
| /* the nature of most system is that IPv6 status doesn't come and go |
| during a program's lifetime so we only probe the first time and then we |
| have the info kept for fast re-use */ |
| static int ipv6_works = -1; |
| if(-1 == ipv6_works) { |
| /* probe to see if we have a working IPv6 stack */ |
| curl_socket_t s = socket(PF_INET6, SOCK_DGRAM, 0); |
| if(s == CURL_SOCKET_BAD) |
| /* an IPv6 address was requested but we can't get/use one */ |
| ipv6_works = 0; |
| else { |
| ipv6_works = 1; |
| Curl_closesocket(NULL, s); |
| } |
| } |
| return (ipv6_works>0)?TRUE:FALSE; |
| } |
| |
| /* |
| * Curl_ipvalid() checks what CURL_IPRESOLVE_* requirements that might've |
| * been set and returns TRUE if they are OK. |
| */ |
| bool Curl_ipvalid(struct connectdata *conn) |
| { |
| if(conn->ip_version == CURL_IPRESOLVE_V6) |
| return Curl_ipv6works(); |
| return TRUE; |
| } |
| |
| #if defined(CURLRES_SYNCH) |
| |
| #ifdef DEBUG_ADDRINFO |
| static void dump_addrinfo(struct connectdata *conn, const Curl_addrinfo *ai) |
| { |
| printf("dump_addrinfo:\n"); |
| for(; ai; ai = ai->ai_next) { |
| char buf[INET6_ADDRSTRLEN]; |
| |
| printf(" fam %2d, CNAME %s, ", |
| ai->ai_family, ai->ai_canonname ? ai->ai_canonname : "<none>"); |
| if(Curl_printable_address(ai, buf, sizeof(buf))) |
| printf("%s\n", buf); |
| else |
| printf("failed; %s\n", Curl_strerror(conn, SOCKERRNO)); |
| } |
| } |
| #else |
| #define dump_addrinfo(x,y) Curl_nop_stmt |
| #endif |
| |
| /* |
| * Curl_getaddrinfo() when built IPv6-enabled (non-threading and |
| * non-ares version). |
| * |
| * Returns name information about the given hostname and port number. If |
| * successful, the 'addrinfo' is returned and the forth argument will point to |
| * memory we need to free after use. That memory *MUST* be freed with |
| * Curl_freeaddrinfo(), nothing else. |
| */ |
| Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn, |
| const char *hostname, |
| int port, |
| int *waitp) |
| { |
| struct addrinfo hints; |
| Curl_addrinfo *res; |
| int error; |
| char sbuf[12]; |
| char *sbufptr = NULL; |
| char addrbuf[128]; |
| int pf; |
| struct SessionHandle *data = conn->data; |
| |
| *waitp = 0; /* synchronous response only */ |
| |
| /* |
| * Check if a limited name resolve has been requested. |
| */ |
| switch(conn->ip_version) { |
| case CURL_IPRESOLVE_V4: |
| pf = PF_INET; |
| break; |
| case CURL_IPRESOLVE_V6: |
| pf = PF_INET6; |
| break; |
| default: |
| pf = PF_UNSPEC; |
| break; |
| } |
| |
| if((pf != PF_INET) && !Curl_ipv6works()) |
| /* The stack seems to be a non-IPv6 one */ |
| pf = PF_INET; |
| |
| memset(&hints, 0, sizeof(hints)); |
| hints.ai_family = pf; |
| hints.ai_socktype = conn->socktype; |
| |
| if((1 == Curl_inet_pton(AF_INET, hostname, addrbuf)) || |
| (1 == Curl_inet_pton(AF_INET6, hostname, addrbuf))) { |
| /* the given address is numerical only, prevent a reverse lookup */ |
| hints.ai_flags = AI_NUMERICHOST; |
| } |
| |
| if(port) { |
| snprintf(sbuf, sizeof(sbuf), "%d", port); |
| sbufptr=sbuf; |
| } |
| error = Curl_getaddrinfo_ex(hostname, sbufptr, &hints, &res); |
| if(error) { |
| infof(data, "getaddrinfo(3) failed for %s:%d\n", hostname, port); |
| return NULL; |
| } |
| |
| dump_addrinfo(conn, res); |
| |
| return res; |
| } |
| #endif /* CURLRES_SYNCH */ |
| #endif /* CURLRES_IPV6 */ |
| |