| // |
| //Copyright (C) 2002-2005 3Dlabs Inc. Ltd. |
| //Copyright (C) 2012-2013 LunarG, Inc. |
| // |
| //All rights reserved. |
| // |
| //Redistribution and use in source and binary forms, with or without |
| //modification, are permitted provided that the following conditions |
| //are met: |
| // |
| // Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // |
| // Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // |
| // Neither the name of 3Dlabs Inc. Ltd. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| //THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| //"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| //LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| //FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| //COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| //INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| //BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| //LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| //CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| //LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| //ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| //POSSIBILITY OF SUCH DAMAGE. |
| // |
| |
| // |
| // Help manage multiple profiles, versions, extensions etc. |
| // |
| // These don't return error codes, as the presumption is parsing will |
| // always continue as if the tested feature were enabled, and thus there |
| // is no error recovery needed. |
| // |
| |
| // |
| // HOW TO add a feature enabled by an extension. |
| // |
| // To add a new hypothetical "Feature F" to the front end, where an extension |
| // "XXX_extension_X" can be used to enable the feature, do the following. |
| // |
| // OVERVIEW: Specific features are what are error-checked for, not |
| // extensions: A specific Feature F might be enabled by an extension, or a |
| // particular version in a particular profile, or a stage, or combinations, etc. |
| // |
| // The basic mechanism is to use the following to "declare" all the things that |
| // enable/disable Feature F, in a code path that implements Feature F: |
| // |
| // requireProfile() |
| // profileRequires() |
| // requireStage() |
| // checkDeprecated() |
| // requireNotRemoved() |
| // requireExtensions() |
| // |
| // Typically, only the first two calls are needed. They go into a code path that |
| // implements Feature F, and will log the proper error/warning messages. Parsing |
| // will then always continue as if the tested feature was enabled. |
| // |
| // There is typically no if-testing or conditional parsing, just insertion of the calls above. |
| // However, if symbols specific to the extension are added (step 5), they will |
| // only be added under tests that the minimum version and profile are present. |
| // |
| // 1) Add a symbol name for the extension string at the bottom of Versions.h: |
| // |
| // const char* const XXX_extension_X = "XXX_extension_X"; |
| // |
| // 2) Add extension initialization to TParseContext::initializeExtensionBehavior(), |
| // the first function below: |
| // |
| // extensionBehavior[XXX_extension_X] = EBhDisable; |
| // |
| // 3) Add any preprocessor directives etc. in the next function, TParseContext::getPreamble(): |
| // |
| // "#define XXX_extension_X 1\n" |
| // |
| // The new-line is important, as that ends preprocess tokens. |
| // |
| // 4) Insert a profile check in the feature's path (unless all profiles support the feature, |
| // for some version level). That is, call requireProfile() to constrain the profiles, e.g.: |
| // |
| // // ... in a path specific to Feature F... |
| // requireProfile(loc, |
| // ECoreProfile | ECompatibilityProfile, |
| // "Feature F"); |
| // |
| // 5) For each profile that supports the feature, insert version/extension checks: |
| // |
| // The mostly likely scenario is that Feature F can only be used with a |
| // particular profile if XXX_extension_X is present or the version is |
| // high enough that the core specification already incorporated it. |
| // |
| // // following the requireProfile() call... |
| // profileRequires(loc, |
| // ECoreProfile | ECompatibilityProfile, |
| // 420, // 0 if no version incorporated the feature into the core spec. |
| // XXX_extension_X, // can be a list of extensions that all add the feature |
| // "Feature F Description"); |
| // |
| // This allows the feature if either A) one of the extensions is enabled or |
| // B) the version is high enough. If no version yet incorporates the feature |
| // into core, pass in 0. |
| // |
| // This can be called multiple times, if different profiles support the |
| // feature starting at different version numbers or with different |
| // extensions. |
| // |
| // This must be called for each profile allowed by the initial call to requireProfile(). |
| // |
| // Profiles are all masks, which can be "or"-ed together. |
| // |
| // ENoProfile |
| // ECoreProfile |
| // ECompatibilityProfile |
| // EEsProfile |
| // |
| // The ENoProfile profile is only for desktop, before profiles showed up in version 150; |
| // All other #version with no profile default to either es or core, and so have profiles. |
| // |
| // You can select all but a particular profile using ~. The following basically means "desktop": |
| // |
| // ~EEsProfile |
| // |
| // 6) If built-in symbols are added by the extension, add them in Initialize.cpp: Their use |
| // will be automatically error checked against the extensions enabled at that moment. |
| // see the comment at the top of Initialize.cpp for where to put them. Establish them at |
| // the earliest release that supports the extension. Then, tag them with the |
| // set of extensions that both enable them and are necessary, given the version of the symbol |
| // table. (There is a different symbol table for each version.) |
| // |
| |
| #include "ParseHelper.h" |
| |
| namespace glslang { |
| |
| // |
| // Initialize all extensions, almost always to 'disable', as once their features |
| // are incorporated into a core version, their features are supported through allowing that |
| // core version, not through a pseudo-enablement of the extension. |
| // |
| void TParseContext::initializeExtensionBehavior() |
| { |
| extensionBehavior[E_GL_OES_texture_3D] = EBhDisable; |
| extensionBehavior[E_GL_OES_standard_derivatives] = EBhDisable; |
| extensionBehavior[E_GL_EXT_frag_depth] = EBhDisable; |
| extensionBehavior[E_GL_OES_EGL_image_external] = EBhDisable; |
| extensionBehavior[E_GL_EXT_shader_texture_lod] = EBhDisable; |
| |
| extensionBehavior[E_GL_ARB_texture_rectangle] = EBhDisable; |
| extensionBehavior[E_GL_3DL_array_objects] = EBhDisable; |
| extensionBehavior[E_GL_ARB_shading_language_420pack] = EBhDisable; |
| extensionBehavior[E_GL_ARB_texture_gather] = EBhDisable; |
| extensionBehavior[E_GL_ARB_gpu_shader5] = EBhDisablePartial; |
| extensionBehavior[E_GL_ARB_separate_shader_objects] = EBhDisable; |
| extensionBehavior[E_GL_ARB_compute_shader] = EBhDisablePartial; |
| extensionBehavior[E_GL_ARB_tessellation_shader] = EBhDisable; |
| extensionBehavior[E_GL_ARB_enhanced_layouts] = EBhDisable; |
| extensionBehavior[E_GL_ARB_texture_cube_map_array] = EBhDisable; |
| extensionBehavior[E_GL_ARB_shader_texture_lod] = EBhDisable; |
| extensionBehavior[E_GL_ARB_explicit_attrib_location] = EBhDisable; |
| extensionBehavior[E_GL_ARB_shader_image_load_store] = EBhDisable; |
| extensionBehavior[E_GL_ARB_shader_atomic_counters] = EBhDisable; |
| extensionBehavior[E_GL_ARB_derivative_control] = EBhDisable; |
| extensionBehavior[E_GL_ARB_shader_texture_image_samples] = EBhDisable; |
| extensionBehavior[E_GL_ARB_viewport_array] = EBhDisable; |
| // extensionBehavior[E_GL_ARB_cull_distance] = EBhDisable; // present for 4.5, but need extension control over block members |
| |
| // AEP |
| extensionBehavior[E_GL_ANDROID_extension_pack_es31a] = EBhDisablePartial; |
| extensionBehavior[E_GL_KHR_blend_equation_advanced] = EBhDisablePartial; |
| extensionBehavior[E_GL_OES_sample_variables] = EBhDisablePartial; |
| extensionBehavior[E_GL_OES_shader_image_atomic] = EBhDisablePartial; |
| extensionBehavior[E_GL_OES_shader_multisample_interpolation] = EBhDisablePartial; |
| extensionBehavior[E_GL_OES_texture_storage_multisample_2d_array] = EBhDisablePartial; |
| extensionBehavior[E_GL_EXT_geometry_shader] = EBhDisable; |
| extensionBehavior[E_GL_EXT_geometry_point_size] = EBhDisable; |
| extensionBehavior[E_GL_EXT_gpu_shader5] = EBhDisable; |
| extensionBehavior[E_GL_EXT_primitive_bounding_box] = EBhDisablePartial; |
| extensionBehavior[E_GL_EXT_shader_io_blocks] = EBhDisable; |
| extensionBehavior[E_GL_EXT_tessellation_shader] = EBhDisable; |
| extensionBehavior[E_GL_EXT_tessellation_point_size] = EBhDisable; |
| extensionBehavior[E_GL_EXT_texture_buffer] = EBhDisablePartial; |
| extensionBehavior[E_GL_EXT_texture_cube_map_array] = EBhDisablePartial; |
| |
| // OES matching AEP |
| extensionBehavior[E_GL_OES_geometry_shader] = EBhDisable; |
| extensionBehavior[E_GL_OES_geometry_point_size] = EBhDisable; |
| extensionBehavior[E_GL_OES_gpu_shader5] = EBhDisable; |
| extensionBehavior[E_GL_OES_primitive_bounding_box] = EBhDisablePartial; |
| extensionBehavior[E_GL_OES_shader_io_blocks] = EBhDisable; |
| extensionBehavior[E_GL_OES_tessellation_shader] = EBhDisable; |
| extensionBehavior[E_GL_OES_tessellation_point_size] = EBhDisable; |
| extensionBehavior[E_GL_OES_texture_buffer] = EBhDisablePartial; |
| extensionBehavior[E_GL_OES_texture_cube_map_array] = EBhDisablePartial; |
| } |
| |
| // Get code that is not part of a shared symbol table, is specific to this shader, |
| // or needed by the preprocessor (which does not use a shared symbol table). |
| const char* TParseContext::getPreamble() |
| { |
| if (profile == EEsProfile) { |
| return |
| "#define GL_ES 1\n" |
| "#define GL_FRAGMENT_PRECISION_HIGH 1\n" |
| "#define GL_OES_texture_3D 1\n" |
| "#define GL_OES_standard_derivatives 1\n" |
| "#define GL_EXT_frag_depth 1\n" |
| "#define GL_OES_EGL_image_external 1\n" |
| "#define GL_EXT_shader_texture_lod 1\n" |
| |
| // AEP |
| "#define GL_ANDROID_extension_pack_es31a 1\n" |
| "#define GL_KHR_blend_equation_advanced 1\n" |
| "#define GL_OES_sample_variables 1\n" |
| "#define GL_OES_shader_image_atomic 1\n" |
| "#define GL_OES_shader_multisample_interpolation 1\n" |
| "#define GL_OES_texture_storage_multisample_2d_array 1\n" |
| "#define GL_EXT_geometry_shader 1\n" |
| "#define GL_EXT_geometry_point_size 1\n" |
| "#define GL_EXT_gpu_shader5 1\n" |
| "#define GL_EXT_primitive_bounding_box 1\n" |
| "#define GL_EXT_shader_io_blocks 1\n" |
| "#define GL_EXT_tessellation_shader 1\n" |
| "#define GL_EXT_tessellation_point_size 1\n" |
| "#define GL_EXT_texture_buffer 1\n" |
| "#define GL_EXT_texture_cube_map_array 1\n" |
| |
| // OES matching AEP |
| "#define GL_OES_geometry_shader 1\n" |
| "#define GL_OES_geometry_point_size 1\n" |
| "#define GL_OES_gpu_shader5 1\n" |
| "#define GL_OES_primitive_bounding_box 1\n" |
| "#define GL_OES_shader_io_blocks 1\n" |
| "#define GL_OES_tessellation_shader 1\n" |
| "#define GL_OES_tessellation_point_size 1\n" |
| "#define GL_OES_texture_buffer 1\n" |
| "#define GL_OES_texture_cube_map_array 1\n" |
| ; |
| } else { |
| return |
| "#define GL_FRAGMENT_PRECISION_HIGH 1\n" |
| "#define GL_ARB_texture_rectangle 1\n" |
| "#define GL_ARB_shading_language_420pack 1\n" |
| "#define GL_ARB_texture_gather 1\n" |
| "#define GL_ARB_gpu_shader5 1\n" |
| "#define GL_ARB_separate_shader_objects 1\n" |
| "#define GL_ARB_compute_shader 1\n" |
| "#define GL_ARB_tessellation_shader 1\n" |
| "#define GL_ARB_enhanced_layouts 1\n" |
| "#define GL_ARB_texture_cube_map_array 1\n" |
| "#define GL_ARB_shader_texture_lod 1\n" |
| "#define GL_ARB_explicit_attrib_location 1\n" |
| "#define GL_ARB_shader_image_load_store 1\n" |
| "#define GL_ARB_shader_atomic_counters 1\n" |
| "#define GL_ARB_derivative_control 1\n" |
| "#define GL_ARB_shader_texture_image_samples 1\n" |
| "#define GL_ARB_viewport_array 1\n" |
| // "#define GL_ARB_cull_distance 1\n" // present for 4.5, but need extension control over block members |
| ; |
| } |
| } |
| |
| // |
| // When to use requireProfile(): |
| // |
| // Use if only some profiles support a feature. However, if within a profile the feature |
| // is version or extension specific, follow this call with calls to profileRequires(). |
| // |
| // Operation: If the current profile is not one of the profileMask, |
| // give an error message. |
| // |
| void TParseContext::requireProfile(TSourceLoc loc, int profileMask, const char* featureDesc) |
| { |
| if (! (profile & profileMask)) |
| error(loc, "not supported with this profile:", featureDesc, ProfileName(profile)); |
| } |
| |
| // |
| // Map from stage enum to externally readable text name. |
| // |
| const char* StageName(EShLanguage stage) |
| { |
| switch(stage) { |
| case EShLangVertex: return "vertex"; |
| case EShLangTessControl: return "tessellation control"; |
| case EShLangTessEvaluation: return "tessellation evaluation"; |
| case EShLangGeometry: return "geometry"; |
| case EShLangFragment: return "fragment"; |
| case EShLangCompute: return "compute"; |
| default: return "unknown stage"; |
| } |
| } |
| |
| // |
| // When to use profileRequires(): |
| // |
| // If a set of profiles have the same requirements for what version or extensions |
| // are needed to support a feature. |
| // |
| // It must be called for each profile that needs protection. Use requireProfile() first |
| // to reduce that set of profiles. |
| // |
| // Operation: Will issue warnings/errors based on the current profile, version, and extension |
| // behaviors. It only checks extensions when the current profile is one of the profileMask. |
| // |
| // A minVersion of 0 means no version of the profileMask support this in core, |
| // the extension must be present. |
| // |
| |
| // entry point that takes multiple extensions |
| void TParseContext::profileRequires(TSourceLoc loc, int profileMask, int minVersion, int numExtensions, const char* const extensions[], const char* featureDesc) |
| { |
| if (profile & profileMask) { |
| bool okay = false; |
| if (minVersion > 0 && version >= minVersion) |
| okay = true; |
| for (int i = 0; i < numExtensions; ++i) { |
| switch (getExtensionBehavior(extensions[i])) { |
| case EBhWarn: |
| infoSink.info.message(EPrefixWarning, ("extension " + TString(extensions[i]) + " is being used for " + featureDesc).c_str(), loc); |
| // fall through |
| case EBhRequire: |
| case EBhEnable: |
| okay = true; |
| break; |
| default: break; // some compilers want this |
| } |
| } |
| |
| if (! okay) |
| error(loc, "not supported for this version or the enabled extensions", featureDesc, ""); |
| } |
| } |
| |
| // entry point for the above that takes a single extension |
| void TParseContext::profileRequires(TSourceLoc loc, int profileMask, int minVersion, const char* extension, const char* featureDesc) |
| { |
| profileRequires(loc, profileMask, minVersion, extension ? 1 : 0, &extension, featureDesc); |
| } |
| |
| // |
| // When to use requireStage() |
| // |
| // If only some stages support a feature. |
| // |
| // Operation: If the current stage is not present, give an error message. |
| // |
| void TParseContext::requireStage(TSourceLoc loc, EShLanguageMask languageMask, const char* featureDesc) |
| { |
| if (((1 << language) & languageMask) == 0) |
| error(loc, "not supported in this stage:", featureDesc, StageName(language)); |
| } |
| |
| // If only one stage supports a feature, this can be called. But, all supporting stages |
| // must be specified with one call. |
| void TParseContext::requireStage(TSourceLoc loc, EShLanguage stage, const char* featureDesc) |
| { |
| requireStage(loc, static_cast<EShLanguageMask>(1 << stage), featureDesc); |
| } |
| |
| // |
| // Within a set of profiles, see if a feature is deprecated and give an error or warning based on whether |
| // a future compatibility context is being use. |
| // |
| void TParseContext::checkDeprecated(TSourceLoc loc, int profileMask, int depVersion, const char* featureDesc) |
| { |
| if (profile & profileMask) { |
| if (version >= depVersion) { |
| if (forwardCompatible) |
| error(loc, "deprecated, may be removed in future release", featureDesc, ""); |
| else if (! suppressWarnings()) |
| infoSink.info.message(EPrefixWarning, (TString(featureDesc) + " deprecated in version " + |
| String(depVersion) + "; may be removed in future release").c_str(), loc); |
| } |
| } |
| } |
| |
| // |
| // Within a set of profiles, see if a feature has now been removed and if so, give an error. |
| // The version argument is the first version no longer having the feature. |
| // |
| void TParseContext::requireNotRemoved(TSourceLoc loc, int profileMask, int removedVersion, const char* featureDesc) |
| { |
| if (profile & profileMask) { |
| if (version >= removedVersion) { |
| const int maxSize = 60; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%s profile; removed in version %d", ProfileName(profile), removedVersion); |
| error(loc, "no longer supported in", featureDesc, buf); |
| } |
| } |
| } |
| |
| // |
| // Use when there are no profile/version to check, it's just an error if one of the |
| // extensions is not present. |
| // |
| void TParseContext::requireExtensions(TSourceLoc loc, int numExtensions, const char* const extensions[], const char* featureDesc) |
| { |
| // First, see if any of the extensions are enabled |
| for (int i = 0; i < numExtensions; ++i) { |
| TExtensionBehavior behavior = getExtensionBehavior(extensions[i]); |
| if (behavior == EBhEnable || behavior == EBhRequire) |
| return; |
| } |
| |
| // See if any extensions want to give a warning on use; give warnings for all such extensions |
| bool warned = false; |
| for (int i = 0; i < numExtensions; ++i) { |
| TExtensionBehavior behavior = getExtensionBehavior(extensions[i]); |
| if (behavior == EBhDisable && relaxedErrors()) { |
| infoSink.info.message(EPrefixWarning, "The following extension must be enabled to use this feature:", loc); |
| behavior = EBhWarn; |
| } |
| if (behavior == EBhWarn) { |
| infoSink.info.message(EPrefixWarning, ("extension " + TString(extensions[i]) + " is being used for " + featureDesc).c_str(), loc); |
| warned = true; |
| } |
| } |
| if (warned) |
| return; |
| |
| // If we get this far, give errors explaining what extensions are needed |
| if (numExtensions == 1) |
| error(loc, "required extension not requested:", featureDesc, extensions[0]); |
| else { |
| error(loc, "required extension not requested:", featureDesc, "Possible extensions include:"); |
| for (int i = 0; i < numExtensions; ++i) |
| infoSink.info.message(EPrefixNone, extensions[i]); |
| } |
| } |
| |
| TExtensionBehavior TParseContext::getExtensionBehavior(const char* extension) |
| { |
| auto iter = extensionBehavior.find(TString(extension)); |
| if (iter == extensionBehavior.end()) |
| return EBhMissing; |
| else |
| return iter->second; |
| } |
| |
| // Returns true if the given extension is set to enable, require, or warn. |
| bool TParseContext::extensionTurnedOn(const char* const extension) |
| { |
| switch (getExtensionBehavior(extension)) { |
| case EBhEnable: |
| case EBhRequire: |
| case EBhWarn: |
| return true; |
| default: |
| break; |
| } |
| return false; |
| } |
| // See if any of the extensions are set to enable, require, or warn. |
| bool TParseContext::extensionsTurnedOn(int numExtensions, const char* const extensions[]) |
| { |
| for (int i = 0; i < numExtensions; ++i) { |
| if (extensionTurnedOn(extensions[i])) return true; |
| } |
| return false; |
| } |
| |
| // |
| // Change the current state of an extension's behavior. |
| // |
| void TParseContext::updateExtensionBehavior(int line, const char* extension, const char* behaviorString) |
| { |
| if (extensionCallback) |
| extensionCallback(line, extension, behaviorString); |
| |
| // Translate from text string of extension's behavior to an enum. |
| TExtensionBehavior behavior = EBhDisable; |
| if (! strcmp("require", behaviorString)) |
| behavior = EBhRequire; |
| else if (! strcmp("enable", behaviorString)) |
| behavior = EBhEnable; |
| else if (! strcmp("disable", behaviorString)) |
| behavior = EBhDisable; |
| else if (! strcmp("warn", behaviorString)) |
| behavior = EBhWarn; |
| else { |
| error(getCurrentLoc(), "behavior not supported:", "#extension", behaviorString); |
| return; |
| } |
| |
| // update the requested extension |
| updateExtensionBehavior(extension, behavior); |
| |
| // see if need to propagate to implicitly modified things |
| if (strcmp(extension, "GL_ANDROID_extension_pack_es31a") == 0) { |
| // to everything in AEP |
| updateExtensionBehavior(line, "GL_KHR_blend_equation_advanced", behaviorString); |
| updateExtensionBehavior(line, "GL_OES_sample_variables", behaviorString); |
| updateExtensionBehavior(line, "GL_OES_shader_image_atomic", behaviorString); |
| updateExtensionBehavior(line, "GL_OES_shader_multisample_interpolation", behaviorString); |
| updateExtensionBehavior(line, "GL_OES_texture_storage_multisample_2d_array", behaviorString); |
| updateExtensionBehavior(line, "GL_EXT_geometry_shader", behaviorString); |
| updateExtensionBehavior(line, "GL_EXT_gpu_shader5", behaviorString); |
| updateExtensionBehavior(line, "GL_EXT_primitive_bounding_box", behaviorString); |
| updateExtensionBehavior(line, "GL_EXT_shader_io_blocks", behaviorString); |
| updateExtensionBehavior(line, "GL_EXT_tessellation_shader", behaviorString); |
| updateExtensionBehavior(line, "GL_EXT_texture_buffer", behaviorString); |
| updateExtensionBehavior(line, "GL_EXT_texture_cube_map_array", behaviorString); |
| } |
| // geometry to io_blocks |
| else if (strcmp(extension, "GL_EXT_geometry_shader") == 0) |
| updateExtensionBehavior(line, "GL_EXT_shader_io_blocks", behaviorString); |
| else if (strcmp(extension, "GL_OES_geometry_shader") == 0) |
| updateExtensionBehavior(line, "GL_OES_shader_io_blocks", behaviorString); |
| // tessellation to io_blocks |
| else if (strcmp(extension, "GL_EXT_tessellation_shader") == 0) |
| updateExtensionBehavior(line, "GL_EXT_shader_io_blocks", behaviorString); |
| else if (strcmp(extension, "GL_OES_tessellation_shader") == 0) |
| updateExtensionBehavior(line, "GL_OES_shader_io_blocks", behaviorString); |
| } |
| |
| void TParseContext::updateExtensionBehavior(const char* extension, TExtensionBehavior behavior) |
| { |
| // Update the current behavior |
| if (strcmp(extension, "all") == 0) { |
| // special case for the 'all' extension; apply it to every extension present |
| if (behavior == EBhRequire || behavior == EBhEnable) { |
| error(getCurrentLoc(), "extension 'all' cannot have 'require' or 'enable' behavior", "#extension", ""); |
| return; |
| } else { |
| for (auto iter = extensionBehavior.begin(); iter != extensionBehavior.end(); ++iter) |
| iter->second = behavior; |
| } |
| } else { |
| // Do the update for this single extension |
| auto iter = extensionBehavior.find(TString(extension)); |
| if (iter == extensionBehavior.end()) { |
| switch (behavior) { |
| case EBhRequire: |
| error(getCurrentLoc(), "extension not supported:", "#extension", extension); |
| break; |
| case EBhEnable: |
| case EBhWarn: |
| case EBhDisable: |
| warn(getCurrentLoc(), "extension not supported:", "#extension", extension); |
| break; |
| default: |
| assert(0 && "unexpected behavior"); |
| } |
| |
| return; |
| } else { |
| if (iter->second == EBhDisablePartial) |
| warn(getCurrentLoc(), "extension is only partially supported:", "#extension", extension); |
| if (behavior == EBhEnable || behavior == EBhRequire) |
| intermediate.addRequestedExtension(extension); |
| iter->second = behavior; |
| } |
| } |
| } |
| |
| // |
| // Call for any operation needing full GLSL integer data-type support. |
| // |
| void TParseContext::fullIntegerCheck(TSourceLoc loc, const char* op) |
| { |
| profileRequires(loc, ENoProfile, 130, nullptr, op); |
| profileRequires(loc, EEsProfile, 300, nullptr, op); |
| } |
| |
| // |
| // Call for any operation needing GLSL double data-type support. |
| // |
| void TParseContext::doubleCheck(TSourceLoc loc, const char* op) |
| { |
| requireProfile(loc, ECoreProfile | ECompatibilityProfile, op); |
| profileRequires(loc, ECoreProfile, 400, nullptr, op); |
| profileRequires(loc, ECompatibilityProfile, 400, nullptr, op); |
| } |
| |
| } // end namespace glslang |