e2fsck/recovery.c

/*
 * linux/fs/recovery.c
 * 
 * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
 *
 * Copyright 1999-2000 Red Hat Software --- All Rights Reserved
 *
 * This file is part of the Linux kernel and is made available under
 * the terms of the GNU General Public License, version 2, or at your
 * option, any later version, incorporated herein by reference.
 *
 * Journal recovery routines for the generic filesystem journaling code;
 * part of the ext2fs journaling system.  
 */

#ifndef __KERNEL__
#include "jfs_user.h"
#else
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/jfs.h>
#include <linux/errno.h>
#include <linux/malloc.h>
#include <linux/locks.h>
#include <linux/buffer.h>
#endif

/*
 * Maintain information about the progress of the recovery job, so that
 * the different passes can carry information between them. 
 */
struct recovery_info 
{
	tid_t		start_transaction;	
	tid_t		end_transaction;
	
	int		nr_replays;
	int		nr_revokes;
	int		nr_revoke_hits;
};

enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY};
static int do_one_pass(journal_t *, struct recovery_info *, enum passtype);
static int scan_revoke_records(journal_t *, struct buffer_head *, tid_t, struct recovery_info *);

#ifdef __KERNEL__

/* Release readahead buffers after use */
static void brelse_array(struct buffer_head *b[], int n)
{
	while (--n >= 0)
		brelse (b[n]);
}


/*
 * When reading from the journal, we are going through the block device
 * layer directly and so there is no readahead being done for us.  We
 * need to implement any readahead ourselves if we want it to happen at
 * all.  Recovery is basically one long sequential read, so make sure we
 * do the IO in reasonably large chunks.
 *
 * This is not so critical that we need to be enormously clever about
 * the readahead size, though.  128K is a purely arbitrary, good-enough
 * fixed value.
 */

#define MAXBUF 8
static int do_readahead(journal_t *journal, unsigned int start)
{
	int err;
	unsigned int max, nbufs, next, blocknr;
	struct buffer_head *bh;
	
	struct buffer_head * bufs[MAXBUF];
	
	/* Do up to 128K of readahead */
	max = start + (128 * 1024 / journal->j_blocksize);
	if (max > journal->j_maxlen)
		max = journal->j_maxlen;

	/* Do the readahead itself.  We'll submit MAXBUF buffer_heads at
	 * a time to the block device IO layer. */
	
	nbufs = 0;
	
	for (next = start; next < max; next++) {
		blocknr = next;
		if (journal->j_inode)
			blocknr = bmap(journal->j_inode, next);
		if (!blocknr) {
			printk (KERN_ERR "JFS: bad block at offset %u\n",
				next);
			err = -EIO;
			goto failed;
		}
		
		bh = getblk(journal->j_dev, blocknr, journal->j_blocksize);
		if (!bh) {
			err = -ENOMEM;
			goto failed;
		}

		if (!buffer_uptodate(bh) && !buffer_locked(bh)) {
			bufs[nbufs++] = bh;
			if (nbufs == MAXBUF) {
				ll_rw_block(READ, nbufs, bufs);
				brelse_array(bufs, nbufs);
				nbufs = 0;
			}
		} else
			brelse(bh);
	}

	if (nbufs)
		ll_rw_block(READ, nbufs, bufs);
	err = 0;
	
failed:	
	if (nbufs) 
		brelse_array(bufs, nbufs);
	return err;
}

#endif /* __KERNEL__ */


/*
 * Read a block from the journal
 */

static int jread(struct buffer_head **bhp, journal_t *journal, 
		 unsigned int offset)
{
	unsigned int blocknr;
	struct buffer_head *bh;

	*bhp = NULL;

	J_ASSERT (offset < journal->j_maxlen);
			
	blocknr = offset;
	if (journal->j_inode)
		blocknr = bmap(journal->j_inode, offset);
	
	if (!blocknr) {
		printk (KERN_ERR "JFS: bad block at offset %u\n",
			offset);
		return -EIO;
	}
	
	bh = getblk(journal->j_dev, blocknr, journal->j_blocksize);
	if (!bh)
		return -ENOMEM;
	
	if (!buffer_uptodate(bh)) {
		/* If this is a brand new buffer, start readahead.
                   Otherwise, we assume we are already reading it.  */
		if (!buffer_req(bh))
			do_readahead(journal, offset);
		wait_on_buffer(bh);
	}
	
	if (!buffer_uptodate(bh)) {
		printk (KERN_ERR "JFS: Failed to read block at offset %u\n",
			offset);
		brelse(bh);
		return -EIO;
	}
		
	*bhp = bh;
	return 0;
}


/*
 * Count the number of in-use tags in a journal descriptor block.
 */

static int count_tags(struct buffer_head *bh, int size)
{
	char *			tagp;
	journal_block_tag_t *	tag;
	int			nr = 0;
	
	tagp = &bh->b_data[sizeof(journal_header_t)];
	
	while ((tagp - bh->b_data + sizeof(journal_block_tag_t)) <= size) {
		tag = (journal_block_tag_t *) tagp;
		
		nr++;
		tagp += sizeof(journal_block_tag_t);
		if (!(tag->t_flags & htonl(JFS_FLAG_SAME_UUID)))
			tagp += 16;

		if (tag->t_flags & htonl(JFS_FLAG_LAST_TAG))
			break;
	}
	
	return nr;
}


/* Make sure we wrap around the log correctly! */
#define wrap(journal, var)						\
do {									\
	if (var >= (journal)->j_last)					\
		var -= ((journal)->j_last - (journal)->j_first);	\
} while (0)

/*
 * journal_recover
 *
 * The primary function for recovering the log contents when mounting a
 * journaled device.  
 * 
 * Recovery is done in three passes.  In the first pass, we look for the
 * end of the log.  In the second, we assemble the list of revoke
 * blocks.  In the third and final pass, we replay any un-revoked blocks
 * in the log.  
 */

int journal_recover(journal_t *journal)
{
	int			err;
	journal_superblock_t *	sb;

	struct recovery_info	info;
	
	memset(&info, 0, sizeof(info));
	sb = journal->j_superblock;
	
	/* 
	 * The journal superblock's s_start field (the current log head)
	 * is always zero if, and only if, the journal was cleanly
	 * unmounted.  
	 */

	if (!sb->s_start) {
		jfs_debug(1, "No recovery required, last transaction %d\n",
			  ntohl(sb->s_sequence));
		journal->j_transaction_sequence = ntohl(sb->s_sequence) + 1;
		return 0;
	}
	

	err = do_one_pass(journal, &info, PASS_SCAN);
	if (!err)
		err = do_one_pass(journal, &info, PASS_REVOKE);
	if (!err)
		err = do_one_pass(journal, &info, PASS_REPLAY);

	jfs_debug(0, "JFS: recovery, exit status %d, "
		  "recovered transactions %u to %u\n",
		  err, info.start_transaction, info.end_transaction);
	jfs_debug(0, "JFS: Replayed %d and revoked %d/%d blocks\n", 
		  info.nr_replays, info.nr_revoke_hits, info.nr_revokes);

	/* Restart the log at the next transaction ID, thus invalidating
	 * any existing commit records in the log. */
	journal->j_transaction_sequence = ++info.end_transaction;
		
	journal_clear_revoke(journal);
	fsync_dev(journal->j_dev);
	return err;
}

/*
 * journal_skip_recovery
 *
 * Locate any valid recovery information from the journal and set up the
 * journal structures in memory to ignore it (presumably because the
 * caller has evidence that it is out of date).  
 *
 * We perform one pass over the journal to allow us to tell the user how
 * much recovery information is being erased, and to let us initialise
 * the journal transaction sequence numbers to the next unused ID. 
 */

int journal_skip_recovery(journal_t *journal)
{
	int			err;
	journal_superblock_t *	sb;

	struct recovery_info	info;
	
	memset(&info, 0, sizeof(info));
	sb = journal->j_superblock;
	
	err = do_one_pass(journal, &info, PASS_SCAN);

	if (err) {
		printk(KERN_ERR "JFS: error %d scanning journal\n", err);
		++journal->j_transaction_sequence;
	} else {
		int dropped = info.end_transaction - ntohl(sb->s_sequence);
		
		jfs_debug(0, 
			  "JFS: ignoring %d transaction%s from the journal.\n",
			  dropped, (dropped == 1) ? "" : "s");
		journal->j_transaction_sequence = ++info.end_transaction;
	}

	journal->j_tail = 0;
	
	return err;
}

static int do_one_pass(journal_t *journal, struct recovery_info *info,
		       enum passtype pass)
{
	
	unsigned int		first_commit_ID, next_commit_ID;
	unsigned long		next_log_block;
	int			err, success = 0;
	journal_superblock_t *	sb;
	journal_header_t * 	tmp;
	struct buffer_head *	bh;
	unsigned int		sequence;
	int			blocktype;
	
	/* Precompute the maximum metadata descriptors in a descriptor block */
	int			MAX_BLOCKS_PER_DESC;
	MAX_BLOCKS_PER_DESC = ((journal->j_blocksize-sizeof(journal_header_t))
			       / sizeof(journal_block_tag_t));

	/* 
	 * First thing is to establish what we expect to find in the log
	 * (in terms of transaction IDs), and where (in terms of log
	 * block offsets): query the superblock.  
	 */

	sb = journal->j_superblock;
	next_commit_ID = ntohl(sb->s_sequence);
	next_log_block = ntohl(sb->s_start);

	first_commit_ID = next_commit_ID;
	if (pass == PASS_SCAN)
		info->start_transaction = first_commit_ID;
	
	jfs_debug(1, "Starting recovery pass %d\n", pass);
	
	/*
	 * Now we walk through the log, transaction by transaction,
	 * making sure that each transaction has a commit block in the
	 * expected place.  Each complete transaction gets replayed back
	 * into the main filesystem. 
	 */

	while (1) {
		int			flags;
		char *			tagp;
		journal_block_tag_t *	tag;
		struct buffer_head *	obh;
		struct buffer_head *	nbh;
		
		/* If we already know where to stop the log traversal,
		 * check right now that we haven't gone past the end of
		 * the log. */
		
		if (pass != PASS_SCAN)
			if (tid_geq(next_commit_ID, info->end_transaction))
				break;
		
		jfs_debug(2, "Scanning for sequence ID %u at %lu/%lu\n",
			  next_commit_ID, next_log_block, journal->j_last);

		/* Skip over each chunk of the transaction looking
		 * either the next descriptor block or the final commit
		 * record. */
		
		jfs_debug(3, "JFS: checking block %ld\n", next_log_block);
		err = jread(&bh, journal, next_log_block);
		if (err)
			goto failed;
		
		next_log_block++;
		wrap(journal, next_log_block);
		
		/* What kind of buffer is it? 
		 * 
		 * If it is a descriptor block, check that it has the
		 * expected sequence number.  Otherwise, we're all done
		 * here. */

		tmp = (journal_header_t *) bh->b_data;
		
		if (tmp->h_magic != htonl(JFS_MAGIC_NUMBER)) {
			brelse(bh);
			break;
		}
		
		blocktype = ntohl(tmp->h_blocktype);
		sequence = ntohl(tmp->h_sequence);
		jfs_debug(3, "Found magic %d, sequence %d\n", 
			  blocktype, sequence);
		
		if (sequence != next_commit_ID) {
			brelse(bh);
			break;
		}
		
		/* OK, we have a valid descriptor block which matches
		 * all of the sequence number checks.  What are we going
		 * to do with it?  That depends on the pass... */
		
		switch(blocktype) {
		case JFS_DESCRIPTOR_BLOCK:
			/* If it is a valid descriptor block, replay it
			 * in pass REPLAY; otherwise, just skip over the
			 * blocks it describes. */
			if (pass != PASS_REPLAY) {
				next_log_block += count_tags(bh, journal->j_blocksize);
				wrap(journal, next_log_block);
				brelse(bh);
				continue;
			}

			/* A descriptor block: we can now write all of
			 * the data blocks.  Yay, useful work is finally
			 * getting done here! */

			tagp = &bh->b_data[sizeof(journal_header_t)];
			while ((tagp - bh->b_data +sizeof(journal_block_tag_t))
			       <= journal->j_blocksize) {
				unsigned long io_block;
				
				tag = (journal_block_tag_t *) tagp;
				flags = ntohl(tag->t_flags);
				
				io_block = next_log_block++;
				wrap(journal, next_log_block);
				err = jread(&obh, journal, io_block);
				if (err) {
					/* Recover what we can, but
					 * report failure at the end. */
					success = err;
					printk (KERN_ERR 
						"JFS: IO error %d recovering "
						"block %ld in log\n",
						err, io_block);
				} else {
					unsigned long blocknr;
					
					J_ASSERT(obh != NULL);
					blocknr = ntohl(tag->t_blocknr);

					/* If the block has been
					 * revoked, then we're all done
					 * here. */
					if (journal_test_revoke
					    (journal, blocknr, 
					     next_commit_ID)) {
						brelse(obh);
						++info->nr_revoke_hits;
						goto skip_write;
					}
								
					/* Find a buffer for the new
					 * data being restored */
					nbh = getblk(journal->j_dev, blocknr,
						     journal->j_blocksize);
					if (nbh == NULL) {
						printk(KERN_ERR 
						       "JFS: Out of memory "
						       "during recovery.\n");
						err = -ENOMEM;
						brelse(bh);
						brelse(obh);
						goto failed;
					}

					memcpy(nbh->b_data, obh->b_data, 
					       journal->j_blocksize);
					if (flags & JFS_FLAG_ESCAPE) {
						* ((unsigned int *) bh->b_data) = htonl(JFS_MAGIC_NUMBER);
					}
					
					mark_buffer_dirty(nbh, 1);
					mark_buffer_uptodate(nbh, 1);
					++info->nr_replays;
					/* ll_rw_block(WRITE, 1, &nbh); */
					brelse(obh);
					brelse(nbh);
				}
				
			skip_write:
				tagp += sizeof(journal_block_tag_t);
				if (!(flags & JFS_FLAG_SAME_UUID))
					tagp += 16;

				if (flags & JFS_FLAG_LAST_TAG)
					break;
			}
			
			brelse(bh);
			continue;
				
		case JFS_COMMIT_BLOCK:
			/* Found an expected commit block: not much to
			 * do other than move on to the next sequence
			 * number. */
			brelse(bh);
			next_commit_ID++;
			continue;

		case JFS_REVOKE_BLOCK:
			/* If we aren't in the REVOKE pass, then we can
			 * just skip over this block. */
			if (pass != PASS_REVOKE) {
				brelse(bh);
				continue;
			}

			err = scan_revoke_records(journal, bh, 
						  next_commit_ID, info);
			brelse(bh);
			if (err)
				goto failed;
			continue;

		default:
			jfs_debug(3, "Unrecognised magic %d, end of scan.\n",
				  blocktype);
			goto done;
		}
	}

 done:
	/* 
	 * We broke out of the log scan loop: either we came to the
	 * known end of the log or we found an unexpected block in the
	 * log.  If the latter happened, then we know that the "current"
	 * transaction marks the end of the valid log.
	 */
	
	if (pass == PASS_SCAN)
		info->end_transaction = next_commit_ID;
	else {
		/* It's really bad news if different passes end up at
		 * different places (but possible due to IO errors). */
		if (info->end_transaction != next_commit_ID) {
			printk (KERN_ERR "JFS: recovery pass %d ended at "
				"transaction %u, expected %u\n",
				pass, next_commit_ID, info->end_transaction);
			if (!success)
				success = -EIO;
		}
	}

	return success;

 failed:
	return err;
}


/* Scan a revoke record, marking all blocks mentioned as revoked. */

static int scan_revoke_records(journal_t *journal, struct buffer_head *bh, 
			       tid_t sequence, struct recovery_info *info)
{
	journal_revoke_header_t *header;
	int offset, max;
	
	header = (journal_revoke_header_t *) bh->b_data;
	offset = sizeof(journal_revoke_header_t);
	max = ntohl(header->r_count);
	
	while (offset < max) {
		unsigned long blocknr;
		int err;
		
		blocknr = ntohl(* ((unsigned int *) (bh->b_data+offset)));
		offset += 4;
		err = journal_set_revoke(journal, blocknr, sequence);
		if (err)
			return err;
		++info->nr_revokes;
	}
	return 0;
}