| 2003-09-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * dumpe2fs.c (list_desc): Use ext2fs_super_and_bgd_loc to |
| determine the locations of the superblock and block group |
| descriptors. |
| |
| 2003-11-20 Theodore Ts'o <tytso@mit.edu> |
| |
| * util.c (check_plausibility): Support 2.6 kernel header files, |
| instead of having the build to crash. (Addresses Debian |
| bug #221778) |
| |
| 2003-09-01 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (progress_init, progress_update): If the environment |
| variable MKE2FS_SKIP_PROGRESS is set, then don't print out |
| a progress bar; for regression test support. |
| (PRS): If the environment variable MKE2FS_DEVICE_SECTSIZE |
| is set, then override the device sector size. Again for |
| regression test support. |
| (main): If the environment variable MKE2FS_SKIP_CHECK_MSG |
| is set, then skip printing an information messages about |
| when the filesystem will be checked, since this number is |
| random and screws up the regression test expect script. |
| |
| 2003-08-31 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (set_fs_defaults): Fix bug which caused -T largefile or |
| -T largefile4 to core dump due to a division by zero |
| error. (Addressed Debian bug #207082) |
| |
| 2003-08-24 Theodore Ts'o <tytso@mit.edu> |
| |
| * dumpe2fs.8.in, e2image.8.in, e2label.8.in, mke2fs.8.in, |
| tune2fs.8.in: Adjust description line so that apropos |
| "ext2" or "ext3" will find the man page. (Addresses |
| Debian Bug #206845) |
| |
| 2003-08-01 Theodore Ts'o <tytso@mit.edu> |
| |
| * badblocks.c (set_o_direct): Add check to make sure the file |
| offset of the device is page aligned. (Addresses Debian |
| Bug #203713) |
| |
| * badblocks.c (test_ro, test_rw): Add code to recover after an |
| error so that we continue reading on page-aligned |
| boundaries. (Thanks to Philippe Troin <phil@fifi.org> for |
| the patch.) |
| |
| 2003-07-25 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.34 |
| |
| 2003-07-25 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (PRS): Add warning if using -j and the blocksize is |
| greater than 4096, since some kernels don't support ext3 |
| with large block sizes. (Addresses Debian bug #193773) |
| |
| * badblocks.c (set_o_direct): Remove debugging printf. (Addresses |
| Debian bug #201499) |
| |
| 2003-07-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.c (wait_many): Rename wait_all() to wait_many(), and have |
| new semantics: WAIT_ALL vs. WAIT_ATLEAST_ONE. This fixes |
| a bug where when fsck is waiting for another partition on |
| the same spindle, it spins wasting a lot of CPU. |
| |
| 2003-07-12 Theodore Ts'o <tytso@mit.edu> |
| |
| * badblocks.c (do_read, do_write, test_rw): Change the read/write |
| test to honor the -c option (number of blocks at a time). |
| do_read and do_write will try to turn on the O_DIRECT flag |
| if it appears that it is possible to use it. (Addresses |
| Debian bug #198006) |
| |
| * mke2fs.c (set_fs_defaults): If sector_size is 0, don't use it to |
| set the blocksize to zero. This causes MD devices to fail |
| since they don't support the BLKSSZGET ioctl. (Addresses |
| Debian bug #196734) |
| |
| 2003-07-06 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (PRS, main): If CONFIG_TESTIO_DEBUG, then use the |
| testio manager. |
| |
| * mke2fs.c (PRS): Round down the default filesystem size so that |
| it is an even multiple of the page size, to work around |
| buffer cache kernel bug. |
| |
| * badblocks.c: Fix gcc -Wall nitpicks (signed/unsigned type issues) |
| |
| * blkid.c: Fix gcc -Wall nitpicks (missing #include <string.h>) |
| |
| 2003-05-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (PRS, set_fs_defaults): If the sector size of the |
| device is larger than the default block size, then use the |
| sector size of the device as the default block size. |
| |
| 2003-05-18 Theodore Ts'o <tytso@mit.edu> |
| |
| * badblocks.c: Use an unsigned integer to support 4-byte test |
| patterns with the high bit set. Let the user explicitly |
| specify a random pattern with the argument "random". |
| |
| 2003-05-07 Theodore Ts'o <tytso@mit.edu> |
| |
| * badblocks.c (test_rw): Fix minor memory leak with test_rw() is |
| called for multiple passes. |
| (test_nd): Fix bug in chosing randomness for the |
| non-destructive test. We were only using 1 bit of |
| randomness per byte instead of 8 due to a bit-shift bug. |
| Also, initialize the random number generator from the time |
| in main(). Thanks to Thayne Harbaugh for pointing out |
| these bugs. |
| |
| * badblocks.c, badblocks.8.in: Functional enhancements contributed |
| by Thayne Harbaugh. These patches allow the -t option to |
| control the test pattern(s) used when checking the disk. |
| Test patterns may be specified in all modes (r/w, r/o and |
| non-destructive). |
| |
| 2003-05-05 Theodore Ts'o <tytso@mit.edu> |
| |
| * tune2fs.c (main, add_journal_device, remove_journal_device): If |
| --enable-testio-debug is set, then use the test_io manager |
| so we can watch what tune2fs is doing. |
| |
| 2003-05-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * uuidgen.c (main): Add setup functions for NLS support. |
| |
| * e2image.c (write_header), mke2fs.c (PRS): Add missing space in |
| displayed message. |
| |
| * badblocks.c (usage), findsuper.c (main), util.c |
| (parse_journal_opts): Fix typo in usage string. |
| |
| * tune2fs.c (parse_time): Add portability code to work around lack |
| of strptime(). |
| |
| * Makefile.in: Add $(LIBINTL) to the link line so we can support |
| using the internal gettext library. |
| |
| * nls-enable.h: Add #ifndef protection around LOCALEDIR definition. |
| |
| 2003-04-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.33 |
| |
| 2003-04-18 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in (uuidgen): Avoid linking lsattr and chattr against |
| libext2fs, and avoid linking blkid against any of the ext2 |
| libraries. |
| |
| 2003-04-17 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in (fsck): Fsck does not need to linked against the |
| ext2 libraries anymore. |
| |
| 2003-04-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.c (main): Put stdout and stderr into non-buffered mode to |
| avoid cosmetic problems when running fsck under logsave. |
| |
| * mke2fs.c (PRS): Avoid printing the version banner for mke2fs if |
| the -q option is specified. (Addresses Debian bug #172716) |
| |
| * logsave.c: Add support for the -a option (only partially |
| implemented previously). Always log the command-line and |
| start and stop time to the log file. Add support for the |
| -s option, which skips text bracketed between control-A |
| and control-B characters. |
| |
| 2003-04-14 Theodore Ts'o <tytso@mit.edu> |
| |
| * logsave.c: New program which saves the output of a command in a |
| log file, even if the containing directory hasn't been |
| mounted yet (in which case the it saves the output in |
| memory until it can write out the logfile). |
| |
| 2003-04-11 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (PRS): If the argument to -b is negative, treat it as a |
| minimum blocksize. (Feature requested by EVMS developers |
| for mainframe DASD's that do not support 1k blocksizes.) |
| |
| * mke2fs.8.in: Document the -g option. (Addresses Debian bug #188318) |
| |
| * mke2fs.c (PRS): Fix bug where mke2fs was incorrectly checking |
| the argument to the -g option, if the default block size |
| is used. (Addresses Debian bug #188319) |
| |
| * tune2fs.8.in, mke2fs.8.in: Document the dir_index filesystem |
| feature which can be used with the -O option. |
| |
| 2003-04-06 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.c (parse_fstab_line, interpret_type, fsck_device, ignore, |
| main): Don't evaluate the filesystem type when loading the |
| fstab file, since that might cause fsck to hang trying to |
| read from a floppy disk. (Addresses Debian bug #187812) |
| Add tmpfs and devpts to filesystems that should be |
| ignored, and add jfs, reseirfs, and xfs as filesystems |
| types where we should complain if we can't find the fsck |
| program for that filesystem type. |
| |
| 2003-04-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * badblocks.c (bb_output): Flush output to the badblocks |
| output file as bad blocks are discovered. |
| |
| 2003-03-25 Theodore Ts'o <tytso@mit.edu> |
| |
| * chattr.1.in: Clarified the description of the 't' (no tail) |
| attribute. (Addresses Debian bug #185945) |
| |
| 2003-03-14 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.c: And #ifdef protection around #include of malloc.h |
| |
| 2003-03-13 Theodore Ts'o <tytso@mit.edu> |
| |
| * e2image.c (write_raw_image_file): Include blocks from slow |
| symbolic links in the raw image file. |
| |
| 2003-03-06 <tytso@mit.edu> |
| |
| * tune2fs.c (parse_tune2fs_options, parse_e2label_options): Allow |
| the device name to be specified using LABEL=xxx or |
| UUID=xxx, since we're including the blkid library anyway. |
| (Addresses Debian bugs #166048, #179671) |
| |
| * tune2fs.8.in, chattr.1.in: Minor man page fixes (Addresses |
| Debian bugs #175233, #175113, and #170497) |
| |
| 2003-03-06 Theodore Tso <tytso@mit.edu> |
| |
| * Makefile.in (DEPLIBS_BLKID): Use DEPLIBUUID, not LIBUUID to |
| avoid depending on -lsocket on Solaris. |
| |
| 2003-03-01 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.c, util.c, tune2fs.c, Makefile.in: Use the blkid library |
| instead of the specialized functions in |
| get-device-by-label.c and fstype.c. |
| |
| * base_device.c (base_device): Take a const char* as an argument. |
| |
| * blkid.c: Remove deprecated -d option, |
| |
| 2003-02-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * blkid.c: Update to reflect renaming of blkid_get_devname() to |
| blkid_get_dev(), and blkid_get_token() to |
| blkid_get_devname(). |
| |
| 2003-01-29 Theodore Ts'o <tytso@mit.edu> |
| |
| * badblocks.8.in: Fix grammar nit. |
| |
| 2003-01-26 Theodore Ts'o <tytso@mit.edu> |
| |
| * blkid.c (main): Modify blkid to use the new libblkid public |
| interfaces. |
| |
| 2003-01-23 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in: Integrate in new blkid library. |
| |
| 2003-01-22 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.c (parse_fstab_line, parse_escape): Add support for |
| backslash escaping in /etc/fstab. (i.e., so that \040 |
| will work.) |
| |
| 2002-11-12 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (PRS): Don't enable the dir_index feature by default; |
| the ext2 code on 2.4 kernels (but not 2.2 kernels, and not |
| the 2.4 ext3 code) accidentally had the backwards |
| compatibility support for dir_indexing removed. |
| |
| 2002-11-09 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.32 |
| |
| 2002-11-08 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.31 |
| |
| 2002-11-08 Theodore Ts'o <tytso@mit.edu> |
| |
| * chattr.1.in: Update man page. |
| |
| 2002-10-31 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.30 |
| |
| 2002-11-01 Theodore Ts'o <tytso@mit.edu> |
| |
| * chattr.c, chattr.1.in: Add support for a new inode flag, which |
| is to be used for indicating the top of directory |
| hierarchies for the Orlov block allocator. |
| |
| 2002-10-31 Theodore Ts'o <tytso@mit.edu> |
| |
| * get_device_by_label.c (read_partitions): Pay attention to |
| partitions returned in /proc/partitions that begin with |
| with the string "lvm". |
| |
| 2002-10-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in (install): Search all compression extensions when |
| deleting old man pages. |
| |
| * dumpe2fs.c (list_desc): Fix bug in algorithm which determined |
| which blocks are used as backup superblock and block group |
| descriptors. |
| |
| * mke2fs.c (PRS): Fix bug which checked the tmp pointer |
| erreoneously (and needlessly). |
| |
| 2002-10-28 <tytso@snap.thunk.org> |
| |
| * fsck.c (main): Fix bug reported by Gregory Mutt. Multiple |
| filesystems explicitly specified on the command line were |
| not being checked in parallel, due to a logic bug |
| introduced in to support the FSCK_MAX_INST environment |
| variable. |
| |
| 2002-10-25 Theodore Ts'o <tytso@mit.edu> |
| |
| * dumpe2fs.c (list_desc, main): Make dumpe2fs more robust so that |
| if there is an error reading the block/inode bitmaps, it |
| will still print out the contents of the block group |
| descriptors. |
| |
| 2002-10-20 Theodore Ts'o <tytso@valinux.com> |
| |
| * dumpe2fs.c (list_desc), mke2fs.c (PRS), e2image.c |
| (mark_table_blocks): Add support for the meta_blockgroup |
| filesystem format. |
| |
| 2002-10-15 <tytso@snap.thunk.org> |
| |
| * tune2fs.8.in, tune2fs.c (update_mntopts, main): Add new option |
| 'o' which allows the system administrator to specify |
| default mount options. |
| |
| 2002-10-13 Theodore Ts'o <tytso@mit.edu> |
| |
| * get_device_by_label.c (read_partitions): Use a 16k buffer to |
| read in /proc/partitions in one go. |
| |
| * badblocks.c, fsck.c, fstype.c, get_device_by_label.c, |
| tune2fs.c: Fix gcc -Wall nits. |
| |
| 2002-10-11 Theodore Ts'o <tytso@mit.edu> |
| |
| * mklost+found.c (main): Make sure the lost+found directory is |
| created with 0700 permissions. |
| |
| 2002-10-02 Theodore Ts'o <tytso@mit.edu> |
| |
| * e2image.c (write_raw_image_file): Handle a bad block in the |
| inode table correctly. |
| |
| 2002-09-29 Theodore Ts'o <tytso@mit.edu> |
| |
| * get_device_by_label.c: Applied sourceforge patch #613447, which |
| adds support for reiserfs volumes for LABEL= and UUID= |
| fstab entries. |
| |
| * badblocks.c (main): Appled sourceforge patch #600451, which |
| addresses sourceforge bug #600388, by AEF. This allows |
| badblocks to work correctly on read-only devices such as |
| CD-ROM's, DVD's, etc. |
| |
| 2002-09-24 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.8.in, tune2fs.8.in: Clarify manual pages about using the |
| caret ('^') character to negate feature sets when using |
| the -O option. Define the has_journal feature to avoid |
| confusion about what ^has_journal means. |
| |
| 2001-09-24 Theodore Tso <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.29 |
| |
| 2002-09-24 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.c: If the bone-headed user enters the filename twice, the |
| -R option which skips the root filesystem will skip all of |
| them. (Addresses Debian bug #159423). Note! This is not |
| a precedent for dealing intelligently with any other kind |
| of doubled entry in /etc/fstab! |
| |
| 2002-09-22 root <tytso@mit.edu> |
| |
| * mke2fs.c (main): Enable directory indexing by default. |
| |
| * tune2fs.c (update_feature_set): Allow directory indexing flag to |
| be set. If so, set the default hash to be TEA, and |
| initialize the hash seed to a random value. |
| |
| 2002-09-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * get_device_by_label.c (init_lvm): Fix bug which caused |
| LABEL='xxx' to not work correctly when using LVM. |
| (Reversed sense of error check reported by ateeq@hotpop.com) |
| |
| 2001-08-31 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.28 |
| |
| 2002-08-17 Theodore Ts'o <tytso@mit.edu> |
| |
| * findfs.8.in: New man page. |
| |
| * tune2fs.c (do_findfs): If tune2fs is executed with argv[0] set |
| to findfs, then it will interpret argv[1] as one of |
| LABEL=xxx or UUID=xxx and translate it to a device name. |
| |
| * get_device_by_label.c (uuidcache_init): Moved code which |
| interpreted /proc/partitions into read_partitions(), and |
| then added support for interpreting /proc/evms/volumes in |
| read_evms(). uuidcache_init() calls both read_evms() and |
| read_partitions(). |
| |
| * mke2fs.8.in: Add a common usage of the -n option. (Addresses |
| Debian Bug #146437) |
| |
| * fsck.c (main): If no filesystems are specified on the command |
| line, default to -As. (Addresses Debian Bug #153102) |
| |
| * badblocks.8.in: Clarify why it's bad to do a non-destructive |
| test on a r/o mounted filesystem. (Addresses Debian Bug |
| #131350) |
| |
| * chattr.1.in: Document the compression attribute flags E, X, and |
| Z, and explain that chattr can't set or set these flags. |
| (Addresses Debian Bug #151990) |
| |
| * fsck.8.in: Fix typo in man page, and clarified text regarding |
| options specifiers for -t option. (Addresses Debian bug |
| #145044) |
| |
| * mke2fs.c (main): If there is a problem zeroing blocks at the end |
| of the filesystem, don't abort mke2fs. Addresses Debian |
| bug #155007. |
| |
| 2002-08-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * e2image.c (write_raw_image_file): Check for an extended |
| attribute block before checking for has_valid_blocks. |
| |
| 2002-07-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.8.in: Document new fsck exit code, FSCK_CANCELED. |
| |
| * fsck.c: Trap SIGINT and SIGTERM, and relay it to all of the |
| child fsck processes. |
| |
| 2002-07-14 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (zap_sector): Clear the buffer *after* testing for the |
| BSD sector label. Otherwise the first 512 bytes don't get |
| zapped. (Addresses Debian bug #147256.) |
| |
| 2002-07-02 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.8.in: Cleaned up man page, and made it a bit more |
| OS-agnostic. Addresses Debian bug #144621. Hope this |
| makes the Hurd whiners happy. :-) |
| |
| 2002-06-28 Theodore Ts'o <tytso@mit.edu> |
| |
| * chattr.1.in: Fix man page typo. (Addresses Debian bug #141938) |
| |
| 2002-06-15 Theodore Ts'o <tytso@mit.edu> |
| |
| * chattr.c: Applied patch from Andrew to support the dirsync flag. |
| |
| 2002-05-22 Andreas Dilger <adilger@clusterfs.com> |
| |
| * mke2fs.c (set_fs_defaults): make the default inode ratio at most |
| one inode per block for large blocksizes. |
| |
| 2002-05-17 Theodore Ts'o <tytso@mit.edu> |
| |
| * mke2fs.c (PRS): Determine the page size using sysconf() at |
| runtime, instead of using the Linux system header files. |
| |
| 2002-05-16 Andreas Dilger <adilger@clusterfs.com> |
| |
| * mke2fs.c (PRS): Allow blocksizes larger than 4k to be specified, |
| with warning printed and the user questioned if blocksize |
| is larger than the system's page size according to the |
| Linux kernel header files. Added better checking for |
| valid inode sizes, and again print a warning message if |
| using a large inode size (since most kernels today don't |
| support this yet). |
| |
| 2002-04-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * fsck.8.in: Fix typo in man page. |
| |
| 2002-03-08 Theodore Tso <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.27 |
| |
| 2002-03-08 Theodore Tso <tytso@mit.edu> |
| |
| * mke2fs.c: Check for the BSD disklabel on all architectures, and |
| also check the byte-swapped magic number as well. |
| |
| 2002-03-07 Theodore Tso <tytso@mit.edu> |
| |
| * mke2fs.c: Output warnings to stderr |
| (From Philipp Thomas <pthomas@suse.de>) |
| |
| * base_device.c (main): Fix gcc -Wall complaints in debug code. |
| |
| * mke2fs.c (zap_sector): Don't erase BSD disklabels on Alpha. |
| (From Thorsten Kukuk <kukuk@suse.de>) |
| |
| 2002-03-04 Philipp Thomas <pthomas@suse.de> |
| |
| * chattr.c (main), fsck.c (main), mke2fs.c (main), findsuper.c |
| (main), dumpe2fs.c (main), lsattr.c (main), partinfo.c (main), |
| tune2fs.c (main), mklost+found.c (main), badblocks.c |
| (main), e2image.c (main): Newer libintl needs LC_CTYPE to |
| be set in addition to LC_MESSAGES. |
| |
| 2002-02-25 Andreas Dilger <adilger@clusterfs.com> |
| |
| * mke2fs.c: Add check for mkfs.ext3 and create a journal in |
| this case. |
| |
| 2002-02-24 Theodore Tso <tytso@mit.edu> |
| |
| * Makefile.in (install): Install hard links for man pages for |
| mkfs.ext2 and mkfs.ext3. Also install hard link for |
| mkfs.ext3. Remove any compressed man pages before |
| installing the man pages. |
| |
| 2002-02-23 Theodore Tso <tytso@mit.edu> |
| |
| * badblocks.8.in: Clarify man page's description of the -f option |
| |
| 2002-02-12 Theodore Tso <tytso@mit.edu> |
| |
| * get_device_by_label.c: Since on non-STDC compilers, we define |
| away const, include get_device_by_label.h after we include |
| fsck.h. |
| |
| * Makefile.in (base_device): Remove use of $<, which is |
| non-portable. |
| |
| 2002-02-03 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.26 |
| |
| 2002-02-03 Theodore Tso <tytso@mit.edu> |
| |
| * fsck.c (interpret_type): Allow filesystems types of the form |
| "ext3,ext2", etc. |
| |
| * fstype.c (identify_fs): Add support for only searching for a |
| specified list of filesystems. Also add support for |
| identifying reiserfs filesystems. |
| |
| 2002-01-29 Theodore Tso <tytso@mit.edu> |
| |
| * fsck.c: Allow the number of outstanding processes fs-specific |
| fsck programs to be capped via the FSCK_MAX_INST |
| envrionment variable. |
| |
| * fsck.8.in: Document all of the environment variables used by fsck. |
| |
| 2002-01-27 Theodore Tso <tytso@mit.edu> |
| |
| * tune2fs.8.in: Document the -f flag to tune2fs. |
| |
| 2002-01-02 Theodore Tso <tytso@mit.edu> |
| |
| * badblocks.c (main): Open the device as O_RDWR if possible, since |
| fsync() isn't guaranteed to work if the filesystem is |
| opened read-only. |
| |
| 2001-12-26 Theodore Tso <tytso@mit.edu> |
| |
| * tune2fs.8.in, tune2fs.c (parse_tune2fs_options, main): Add |
| support for new option, -T, which allows the user to set |
| the last checked time on the filesystem. |
| |
| 2001-12-24 Theodore Tso <tytso@mit.edu> |
| |
| * mke2fs.c (main, test_disk): If two -c options are |
| specified, then perform a destructive read/write test |
| of the disk. |
| |
| * mke2fs.8.in: Document the double -c option; also encourage users |
| to use -c instead of the -l/-L options since it's too hard |
| for users to get things like the blocksize parameter correct. |
| |
| * badblocks.8.in: Encourage users to use the -c option in mke2fs |
| and e2fsck instead of running badblocks directly. |
| |
| * mke2fs.c (create_lost_and_found): The lost+found directory is |
| now created with 0700 permissions, since files which get |
| dropped into that directory may have come from a protected |
| directory, and the system administrator may not deal with |
| immediately. (Addresses Debian bug #118443) |
| |
| 2001-12-23 Theodore Tso <tytso@mit.edu> |
| |
| * Makefile.in, jfs_user.h: Move linux/jbd.h to |
| ext2fs/kernel-jbd.h, to avoid using the system header |
| file version of hbd.h when using diet glibc (since it |
| forcibly adds /usr/include to the beginning of the |
| include search path.) |
| |
| 2001-12-22 Theodore Tso <tytso@mit.edu> |
| |
| * get_device_by_label.c (init_lvm): Add support to read out |
| information from the LVM proc hierarchy, so that the UUID |
| cache can search the LVM logical volumes for UUID's, |
| labels, etc. |
| |
| 2001-12-21 Theodore Tso <tytso@mit.edu> |
| |
| * dumpe2fs.c (list_bad_blocks): Change to not die if the listing |
| of the bad blocks can't be found. Slimmed down dumpe2fs |
| by eliminating duplicate code paths. |
| |
| 2001-12-16 Theodore Tso <tytso@mit.edu> |
| |
| * dumpe2fs.c (list_desc), fsck.c (fs_match), |
| get_device_by_label.c (get_label_uuid), |
| mke2fs.c (set_fs_defaults, zap_sector, PRS), |
| tune2fs.c (remove_journal_device, update_feature_set), |
| util.c (figure_journal_size), util.h: Fix gcc -Wall nits. |
| |
| * e2image.c (write_raw_image_file): Fix gcc -Wall nits, and use |
| the stashed inode functions to optimize away system calls. |
| |
| * Makefile.in, jfs_user.h: linux/jfs.h has been renamed to |
| linux/jbd.h |
| |
| 2001-12-02 Theodore Tso <tytso@mit.edu> |
| |
| * dumpe2fs.c: Don't print the offset to the bitmap and inode table |
| if it's negative. Also did some generalized code clean up |
| to slim it down the support of the -x option. |
| |
| 2001-11-24 Theodore Tso <tytso@mit.edu> |
| |
| * e2image.8.in: Fix cut-and-paste typo (Addresses Debian bug |
| #119624) |
| |
| 2001-11-13 Theodore Tso <tytso@mit.edu> |
| |
| * util.c (check_plausibility): Use stat64 if available so that |
| check_plausibility() works with files > 2GB. |
| |
| 2001-11-05 Theodore Tso <tytso@mit.edu> |
| |
| * chattr.1.in: Update the man page to document the EXT2_NOTAIL_FL |
| flag. |
| |
| * chattr.c: Add support for the EXT2_NOTAIL_FL flag. |
| |
| * fsck.c (interpret_type): If the "auto" type is specified, make |
| sure interpet_device() is called so that device |
| specifications which use LABEL= or UUID= are translated |
| into a real device name. |
| |
| 2001-10-12 Theodore Tso <tytso@mit.edu> |
| |
| * e2image.c (output_meta_data_blocks): Optimize away excess |
| lseek() calls when creating a sparse file. Fewer system |
| calls are a good thing. <g> |
| |
| 2001-10-07 Andreas Dilger <adilger@turbolinux.com> |
| |
| * mke2fs.c (main): Always exit with non-zero code in case of error. |
| |
| * mke2fs.c (zap_sector): Check that buffer allocation succeeded. |
| |
| 2001-09-20 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.25 |
| |
| 2001-09-19 Theodore Tso <tytso@mit.edu> |
| |
| * tune2fs.c (remove_journal_inode): Remove dead code that wasn't |
| in use. |
| |
| * tune2fs.8.in: Update man page to reflect the fact that adding or |
| removing a journal doesn't require running e2fsck. |
| |
| 2001-09-13 Theodore Tso <tytso@mit.edu> |
| |
| * mke2fs.c (zap_sector): Allocate sufficient space for |
| zero-filled buffer. |
| |
| 2001-09-02 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.24a |
| |
| 2001-08-31 Andreas Dilger <adilger@turbolinux.com> |
| |
| * mke2fs.c (main): Fix version format string. |
| |
| 2001-08-30 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.24 |
| |
| 2001-08-30 Theodore Tso <tytso@valinux.com> |
| |
| * badblocks.8.in: Fix spelling typo. (Addresses Debian bug #110621) |
| |
| * mke2fs.c (zap_sector): Now takes a third argument, which is how |
| many sectors to clear out. Fixed up Andreas's patch to |
| make it a bit more efficient/compact. |
| |
| 2001-08-30 Andreas Dilger <adilger@turbolinux.com> |
| |
| * mke2fs.c (main): Zap the second sector of the disk, along with |
| any sectors in the same filesystem block after the superblock. |
| The latter will remove (for example) swapspace signatures |
| on 4kB+ blocksize filesystems. Also when zeroing the "end" |
| of the filesystem don't actually zero the start of a very |
| small device (less than 64 blocks). |
| |
| 2001-08-27 Theodore Tso <tytso@valinux.com> |
| |
| * fsck.c (main): Make version display consistent with the other |
| e2fsprogs programs. |
| |
| * lsattr.c, chattr.c, mke2fs.c, tune2fs.c, dumpe2fs.c, e2image.c, |
| mklost+found.c: Remove EXT2FS_VERSION from the version |
| display, since it only confuses people. |
| |
| 2001-08-18 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c (remove_journal_device): Remove unused variable |
| check_uuid. |
| |
| * get_device_by_label.h: Define function prototype for |
| copy_string(), since this was moved from fsck.c to |
| get_device_by_label.c by Andreas's BK changeset. |
| |
| 2001-08-17 Andreas Dilger <adilger@turbolinux.com> |
| |
| * get_device_by_label.[ch], fsck.c, util.c: New interpret_spec() |
| function in get_device_by_label.c to allow the use of |
| UUID= or LABEL= when creating filesystems which use external |
| journal dev (e.g. mke2fs -J device=LABEL=<journal_label>). |
| |
| * tune2fs.c: Use superblock s_journal_uuid to locate an external |
| journal device instead of s_journal_dev when removing it. |
| Allow opening journal devices to set the label and UUID |
| in the ext2 superblock. |
| |
| * mke2fs.c, tune2fs.c: Free journal_device after use, as it is |
| malloc'd in interpret spec. |
| |
| 2001-08-15 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.23 |
| |
| 2001-08-15 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c: Make sure that error messages are sent to stderr, and |
| normal messages are sent to stdout. (Addresses Debian bug |
| #108555.) |
| |
| * fsck.8.in: Fixed error in synopsis of the man page. |
| |
| * fsck.c (check_all): Don't bother to interpret a device where the |
| pass number is zero. (Addresses Debian bug #106696.) |
| (main): Print a warning message if there are no devices to |
| be checked. (Addresses Debian bug #107458.) |
| |
| * mke2fs.c (PRS): Handle -O and -s options in line in the getopt |
| loop, so that -s and -O handling are a bit more intuitive. |
| (Not that they should be mixed anyway; -s is deprecated.) |
| |
| * tune2fs.c (parse_tune2fs_options): Give an error if -O is |
| specified more than once. |
| |
| 2001-08-10 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.8.in: Slim down text describing the -O flag to remove |
| text that erroneously implied that all features |
| (including compatible flags) aren't compatible with older |
| kernels. |
| |
| 2001-08-09 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): Fix bug pointed out by Christopher Niessen; if |
| mke2fs -O none is specified, the sparse_super feature |
| should not be present. |
| |
| * e2image.c, e2image.8.in: Add support for raw image files. |
| |
| 2001-08-04 Andreas Dilger <root@lynx.adilger.int> |
| |
| * mke2fs.c (PRS): Put check for JOURNAL_DEV before sparse_option, |
| so we don't set the sparse superblock flag on journal devices. |
| |
| 2001-07-31 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c (update_feature_set, remove_journal_inode): If |
| removing an in-filesystem journal, clear out the journal |
| inode and update the filesystem accounting structures so |
| we don't have to run e2fsck to clean up after ourselves |
| |
| 2001-07-30 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c (update_feature_set): Don't require a forced fsck if |
| we're removing an external journal from a filesystem. |
| |
| 2001-07-27 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): If the blocksize is not specified and the |
| journal device is specified, use it to determine the |
| blocksize of the new filesystem. |
| |
| 2001-07-20 Theodore Tso <tytso@valinux.com> |
| |
| * fsck.8.in: Add much more explicit language documenting how the |
| fs_passno field in /etc/fstab is handled. (Addresses |
| Debian bug #30833). |
| |
| 2001-07-19 Theodore Tso <tytso@valinux.com> |
| |
| * fstype.c (identify_fs): New file which looks at the superblock |
| of the filesystem to determines its type. |
| |
| * fsck.c (fsck_device, ignore, interpret_type): Call identify_fs |
| if the type specified in /etc/fstab is "auto". |
| |
| 2001-06-23 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.22 |
| |
| 2001-06-15 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.21 |
| |
| 2001-06-14 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): Remove unneeded test in when creating a external |
| filesystem journal. |
| |
| 2001-06-13 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c, mke2fs.c, util.c, util.h (print_check_message): Move |
| the message which displays how often the filesystem will |
| be checked from mke2fs into a utility subroutine. Then |
| cause tune2fs to call that function to display the message |
| after adding a journal to a filesystem. |
| |
| * mke2fs.8.in: Add manual page fixups and explanation for why it's |
| good to check filesystems periodically from Andreas |
| Dilger. |
| |
| * Makefile.in: Don't build e2image if --disable-imager is |
| specified to configure. |
| |
| 2001-06-12 Theodore Tso <tytso@valinux.com> |
| |
| * dumpe2fs.c: Use WORDS_BIGENDIAN to determine whether or not |
| we're (not) using i386 byte order. |
| |
| * dumpe2fs.c, mke2fs.c: Stop using the compatibility badblocks |
| function, and use the ext2fs_badblocks_* functions |
| instead. |
| |
| * fsck.c (device_already_active): Fixed bug which can cause fsck |
| to core dump if there are a mix of devices with standard |
| and non-standard names. (Addresses Debian bug #100559) |
| |
| 2001-06-07 Theodore Tso <tytso@valinux.com> |
| |
| * chattr.c, lsattr.c: Don't use _FILE_BITS_OFFSET method of using |
| the 64-bit function, since this changes the expected size |
| of struct dirent. Instead use lseek64 explicitly. |
| |
| 2001-06-01 Theodore Tso <tytso@valinux.com> |
| |
| * Makefile.in: Move include/asm/types.h.in to |
| lib/ext2fs/ext2_types.h.in. |
| |
| 2001-05-25 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.20 |
| |
| 2001-05-25 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c (update_feature_set): Fix capitalization typo. |
| |
| 2001-05-23 Theodore Tso <tytso@valinux.com> |
| |
| * partinfo.c (main): Use unsigned long instead of long when |
| querying the size of a device using the BLKGETSIZE ioctl, |
| to remove the 1TB limit (and turn it into a 2TB limit :-) |
| |
| * fsck.c (compile_fs_type): Fix I18N compilation bug: use N_() |
| instead of _() to initialize static variables. |
| |
| 2001-05-20 Theodore Tso <tytso@valinux.com> |
| |
| * fsck.8.in, fsck.c (compile_fs_type, fs_type, ignore): Fix |
| handling of -t option to be more intuitive. Also add |
| support for the Mandrake -t loop hack. See man page |
| for description of new -t semantics. |
| |
| * fsck.c (device_already_active): Fix bug in |
| device_already_active which could cause infinite loops if |
| we don't know the base_device of the filesystem. |
| |
| * fsck.c: Make sure all exit status codes returned by fsck are |
| consistent with the error codes documented in the fsck man |
| page. |
| |
| 2001-05-14 Theodore Tso <tytso@valinux.com> |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, e2image.c, findsuper.c, |
| lsattr.c, mke2fs.c, mklost+found.c, tune2fs.c, util.c: |
| Change location of ext2_fs.h to be ext2fs/ext2_fs.h |
| |
| * tune2fs.8.in: Fix typo's and make other clarifications suggested |
| by Andreas Dilger. |
| |
| 2001-05-11 Andreas Dilger <adilger@turbolinux.com> |
| |
| * mke2fs.c: don't zap the superblock if we are running with noaction! |
| Zap the end of the device to remove stale RAID superblocks. |
| |
| 2001-05-14 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c (update_feature_set): Clean up some printf messages. |
| |
| * fsck.8.in, mke2fs.8.in, tune2fs.8.in: Fix typo's and make other |
| clarifications suggested by Andreas Dilger. |
| |
| 2001-05-13 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): Integrated changes from Andreas Dilger which |
| make the revision superblock field be set to the correct |
| value depending on if superblock features are set. |
| |
| 2001-05-12 Theodore Tso <tytso@valinux.com> |
| |
| * fsck.c (PRS): fsck -? now prints the usage message. |
| |
| * badblocks.8.in, dumpe2fs.8.in, e2label.8.in, mke2fs.8.in, |
| mklost+found.8.in, tune2fs.8.in: Fix typo; removed |
| excess "anonymous" in the AVAILABILITY section. |
| |
| * chattr.1.in, lsattr.1.in, uuidgen.1.in: Update URL location of |
| e2fsprogs package. |
| |
| 2001-05-07 Theodore Tso <tytso@valinux.com> |
| |
| * util.c: Use specific check for HAVE_SYS_STAT_H. |
| |
| 2001-05-05 Theodore Tso <tytso@valinux.com> |
| |
| * fsck.8.in: Add explicit language to describe how options get |
| passed to filesystem-specific checkers. |
| |
| * badblocks.8.in: Fixed man page to describe the first optional |
| parameter to badblocks as last_block, instead of |
| num_blocks. (Debian bug #87216) |
| |
| * badblocks.c: Change the blocks_count variable to be last_count, |
| which is a more accurate description of the variable. |
| |
| 2001-05-03 Theodore Tso <tytso@valinux.com> |
| |
| * e2image.8.in: New manual page |
| |
| * badblocks.8.in, e2label.8.in, mke2fs.8.in mklost+found.8.in, |
| tune2fs.8.in: Update location of e2fsprogs to be |
| http://e2fsprogs.sourceforge.net. |
| |
| * dumpe2fs.c (main): Add new flag, -i, which will allow dumpe2fs |
| to dump out the filesystem statistics from an ext2 image |
| file. |
| |
| * e2image.c (main): Fix format of e2image to be easier to be parse |
| by ext2fs_open(). |
| |
| 2001-05-01 Theodore Tso <tytso@valinux.com> |
| |
| * fsck.c (device_already_active): If we're not able to determine |
| the base device, we should assume that the device is |
| already active in order to force serialization. |
| |
| 2001-04-26 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c (parse_tune2fs_options): Interpret -c 0 as -c -1 (for |
| backwards compatibility with older kernels). -c 0 makes |
| more sense to users. |
| |
| 2001-04-22 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.c (remove_journal_device): If the force flag is given, |
| tune2fs will remove the journal device information from |
| the superblock even if tune2fs failed to open the journal |
| device or otherwise other failed to remove the filesystem |
| from journal device. |
| (parse_tune2fs_options): Fix -j option so that it works |
| (it was missing the open_flag being set to EXT2_FLAG_RW). |
| (main): Accept "-U clear" to set a null UID. |
| |
| 2001-04-21 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.8.in: Manual page cleanups. Temporarily comment out the |
| documentation for the extern journal device support. |
| |
| * mke2fs.c (usage): Remove the deprecated -s option from the usage |
| message. |
| |
| 2001-04-16 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.c (main): Add better explanation about when the |
| filesystem will be checked after it is created. |
| |
| * util.c (parse_journal_opts): Remove code which allowed a bare |
| number to be treated as a journal size. |
| |
| * mke2fs.c, tune2fs.c: Add newlines to error messages so that they |
| look nicer. |
| |
| * mke2fs.c (create_journal_dev): Call |
| ext2fs_create_journal_superblock() first, so if it's going |
| to error out, the user finds out before waiting for the |
| entire device to get zero'ed. |
| |
| 2001-03-26 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.8.in, tune2fs.8.in: Change man paegs to document that the |
| journal must be bewteen 1024 and 102,400 file system |
| blocks. |
| |
| * mke2fs.c, tune2fs.c: Change to use figure_journal_size() |
| |
| * util.c, util.h (figure_journal_size): Change |
| journal_default_size into routine which also converts the |
| requested journal size into filesystem blocks and does |
| bounds checking to make sure the journal is sized |
| reasonably. Renamed function to journal_default_size. |
| (parse_journal_opts): Remove bounds check for the journal |
| size, since this is now done in figure_journal_size, and |
| based on the number of filesystem blocks, as opposed to |
| using the absolute size of the journal. |
| |
| 2001-02-17 Theodore Tso <tytso@valinux.com> |
| |
| * mke2fs.c (main): Flush out the "creating journal" message. |
| Also handle the case where the default journal size |
| returns zero blocks == no journal. Print out how often |
| the filesystem will be checked. |
| |
| 2001-02-08 Theodore Tso <tytso@valinux.com> |
| |
| * e2image.c (main): Add code to write the e2image header. |
| |
| 2001-02-07 Theodore Tso <tytso@valinux.com> |
| |
| * tune2fs.8.in: Update man page to reflect that 2.0.39 supports |
| sparse_super. |
| |
| * dumpe2fs.c (list_desc): Fix fencepost error when calculating the |
| range of inode table blocks. Add '0x' to values printed |
| in hex. |
| |
| * chattr.c, lsattr.c: Define the _LARGEFILE64_SOURCE to force the |
| use of the LFS so that lstat will work on large files. |
| |
| 2001-01-17 Theodore Ts'o <tytso@valinux.com> |
| |
| * tune2fs.c, mke2fs.c, tune2fs.8.in, mke2fs.8.in: Change user |
| interface so that -J is used to specify journal options, |
| and -j is used to request creation of a journal using |
| default values. (This is a UI change, but we haven't done |
| a formal release, and it makes things much more consistent |
| with the rest of the options out there.) |
| |
| * tune2fs.c: Add support for removing a filesystem from an |
| external journal; we correctly remove the filesystem UUID |
| from the external journal's filesystem list. |
| |
| * util.h, util.c (journal_default_size): New function from Andreas |
| Dilger to calculate an appropriate default journal size |
| given a filesystem size. |
| |
| * util.c (parse_journal_opts): Allow the creation of a journal as |
| small as 1MB. |
| |
| * dumpe2fs.c (print_journal_information): Use s_first_data_block |
| to find the correct block to read the journal superblock. |
| |
| 2001-01-15 Theodore Ts'o <tytso@valinux.com> |
| |
| * tune2fs.c: Changed the external journal code so that it simply |
| adds a filesystem to a journal; the journal must have bene |
| created via "mke2fs -O journal_dev /dev/XXX". |
| |
| * mke2fs.c: Add support for creating an external journal device by |
| using the command "mke2fs -O journal_dev /dev/XXX". Also |
| changed the external journal code so -j device=/dev/XXX it |
| simply adds a filesystem to that journal; the journal must |
| have been created via separate step. |
| |
| * dumpe2fs.c (print_journal_information): Add support for dumping |
| information about an external journal device. |
| |
| 2001-01-14 Theodore Ts'o <tytso@valinux.com> |
| |
| * mke2fs.c: Add new filesystem types, largefile and largefile4, |
| for those filesystems whose average inode size is 1MB and |
| 4MB, respectively. Allow the inode ratio specified to be |
| has high as 4MB. Make the s_max_mount_count vary between |
| 20 and 40, to avoid needing to check all of the |
| filesystems at the same time. Add some random jitter to |
| the s_max_mount_count value so that we avoid checking all |
| of the filesystems at the same time when we reboot. |
| |
| * tune2fs.8.in: Add description of the -j option. |
| |
| * tune2fs.c (add_journal): Minor fixes from Andreas Dilger. Flush |
| stdout after printing in-progress message. |
| (main): Exit with status code 1 if we failed to determine |
| the mount status of the device. |
| |
| 2001-01-11 <tytso@snap.thunk.org> |
| |
| * e2image.c, mke2fs.c, mklost+found.c, tune2fs.c, util.c, |
| uuidgen.c: Fix gcc -Wall complaints, including one bug in |
| tune2fs caused by a block automatic shadowing version of |
| the variable we really wanted to use, which broke the |
| logic testing to see if the filesystem was mounted. |
| |
| * badblocks.c (flush_bufs): Use ext2fs_sync_device() to sync and |
| flush the device. |
| |
| * mke2fs.c: Change ino_t to ext2_ino_t. |
| |
| 2001-01-08 <tytso@snap.thunk.org> |
| |
| * Makefile.in, tune2fs.c: Move e2label functionality into tune2fs, |
| using argv[0] as a dispatch. This allows e2label to be |
| (more) safely used on mounted filesystems. |
| |
| 2001-01-05 <tytso@snap.thunk.org> |
| |
| * get_device_by_label.h (get_volume_label_by_spec): Add function |
| prototype. |
| |
| * get_device_by_label.c: Use string_copy() instead of strdup() for |
| portability's sake. Fix a few other gcc -Wall |
| complaints. |
| |
| * fsck.c (string_copy): Export string_copy() extern. |
| |
| * badblocks.c: Fix various gcc -Wall complaints, including |
| an incorrect reference to sync in flush_bufs(). |
| |
| 2001-01-03 <tytso@snap.thunk.org> |
| |
| * tune2fs.c (update_feature_set, add_journal): Moved to separate |
| functions. Added ability to add and remove the journal |
| while the filesystem is live. Added support for setting |
| a time-based UUID. Removed zero-initialized static variables. |
| |
| * mke2fs.c, util.c, util.h (strcasecmp, proceed_question, |
| check_plausibility, parse_journal_opts, check_mount): |
| Moved functions to util.c so they can be used by tune2fs. |
| |
| * mke2fs.c (main): Change ext2fs_add_journal_fs() to |
| ext2fs_add_journal_inode() to reflect function renaming. |
| |
| 2001-01-01 <tytso@snap.thunk.org> |
| |
| * mke2fs.c, e2image.c: Removed references to struct ext2fs_sb to |
| struct ext2_super_block. |
| |
| * tune2fs.c (main): Add support to allow HAS_JOURNAL flag to be |
| cleared, but only if the filesystem is unmounted or |
| mounted read-only. Changed struct ext2fs_sb to struct |
| ext2_super_block, and cleaned up old code which was needed |
| for old versions of ext2_fs.h (not needed since we're |
| using our own version now). |
| |
| 2000-12-31 <tytso@snap.thunk.org> |
| |
| * fsck.c (check_all): Call interpet_device to resolve LABEL= and |
| UUID= right away so that the device_already_active() logic |
| can do the right thing. Also cleaned up the the root |
| filesystem logic checking code; fixed up a logic bug with |
| the parallel_root option. |
| |
| * lsattr.1.in: Add pointer to chattr man page for definition of |
| the file attributes. |
| |
| * lsattr.c (list_attributes): Minor cleanup to smooth out logic |
| flow. Also removed static initialized variables to zero. |
| |
| * chattr.c (decode_arg, get_flag): Use a table-driven method for |
| decoding the ext2 file flags character options. Add |
| support for the journaled data flag. |
| |
| * chattr.1.in: Document the -j/+j/=j flag. |
| |
| 2000-12-30 <tytso@snap.thunk.org> |
| |
| * mke2fs.8.in: Minor clarity edit. |
| |
| * mke2fs.c (usage): Document the -j option. |
| (main): Print the number blocks used in the journal. |
| |
| 2000-12-28 <tytso@snap.thunk.org> |
| |
| * base_device.c (base_device): Add support for DAC960 device |
| names. |
| |
| * fsck.c (device_already_active): Handle the case where |
| base_device doesn't know how to interpret the device name, |
| instead of core dumping. |
| |
| 2000-12-09 <tytso@snap.thunk.org> |
| |
| * mke2fs.c (main, parse_journal_opts): Add support for creating V1 |
| superblocks. We now pass in a journal_flags field to the |
| journal creation routines for this purpose. |
| |
| * mke2fs.c: Remove zero initializers to save a few bytes from the |
| executable image. (Are we excited yet?) |
| |
| * findsuper.c: And non-subtle copyright licensing restriction to |
| get Yann to remove this program from the Debian package. :-) |
| |
| 2000-12-03 <tytso@snap.thunk.org> |
| |
| * fsck.c (device_already_active): Change to use new version of |
| base_device() which now returns dynamically allocated |
| memory. |
| |
| * base_device.c (base_device): New version moved from fsck.c which |
| now understands ugly devfs names. (Debian bug #65181) |
| |
| * base_device.tst: Test case for base_device.c |
| |
| 2000-12-02 <tytso@snap.thunk.org> |
| |
| * fsck.8.in: Add clarification that filesystems with a fs_passno |
| of 0 are skipped with the -A option. (Debian wishlist/bug |
| #63442) |
| |
| * fsck.c (wait_one): When we let a new fsck take control of the |
| console to display the progress bar, set FLAG_PROGRESS to |
| so that fsck knows not to start new processes during an |
| fsck pass with the progress bar. (Should fix debian bug |
| #65267) |
| |
| * tune2fs.8.in: Add clarifying statement about converting user and |
| group names to uid's before storing them in the |
| superblock. (Debian bug #67446) |
| |
| 2000-11-16 Theodore Ts'o <tytso@valinux.com> |
| |
| * mke2fs.c(main): Expand the -j option so that it parses |
| option=argument style options, and add support for |
| creating filesystems with external journals. |
| |
| * mke2fs.8.in: Document new syntax for the -j option. |
| |
| 2000-11-05 <tytso@snap.thunk.org> |
| |
| * e2image.c, Makefile.in: New program which saves ext2 metadata to |
| a file for people who need a last-ditch saving throw. |
| |
| 2000-10-24 <tytso@snap.thunk.org> |
| |
| * mke2fs.c (PRS): Applied Andreas Dilger's patch to make the -r -s |
| handling a bit more sane. (Even though -s is deprecated |
| at this point.) |
| |
| * get_device_by_label.c: Apply fix from Erik Troan to support 16 |
| character labels. |
| |
| * fsck.c (device_already_active): Add a special case check for MD |
| devices, so we don't try to check them in parallel with |
| other devices. |
| |
| * mke2fs.c (PRS, main), mke2fs.8.in: Add support for the -j |
| option, which builds an ext2/3 filesystem with an ext3 |
| journal. |
| |
| 2000-10-24 <tytso@valinux.com> |
| |
| * mke2fs.c (zap_sector): Fix really stupid typo which gcc 2.95 |
| didn't catch. |
| |
| 2000-09-12 <tytso@valinux.com> |
| |
| * fsck.c: Add base device definitions for hd[e-h], for those |
| systems with four IDE interfaces. |
| |
| 2000-09-11 <tytso@valinux.com> |
| |
| * mke2fs.c (zap_sector): Fix error message printed when zap_sector |
| fails. |
| |
| * dumpe2fs.c (list_desc): Fixed format string bug when printing |
| the inode table location in non-hex format. |
| |
| 2000-08-20 <tytso@valinux.com> |
| |
| * get_device_by_label.c: Add call to ext2fs_find_block_device if |
| we can't find the device using the name given by |
| /proc/partitions. (This can happen if devfs is compiled |
| into the kernel, but not mounted.) |
| |
| 2000-06-27 Andreas Dilger <adilger@turbolabs.com> |
| |
| * dumpe2fs.c (usage): add fhx options to usage message, add -x option |
| to print out the per-group block numbers in hex, add line for |
| location of primary/backup superblock and group descriptors |
| |
| * mke2fs.c: rename max to group_blk_max avoid potential macro conflict |
| |
| 2000-08-14 <tytso@valinux.com> |
| |
| * mke2fs.c (zap_sector): Change zap_bootsect to more general |
| zap_sect. |
| (main): Clear the superblock when starting mke2fs, to |
| avoid leaving the filesystem in an inconsistent state. |
| |
| 2000-07-26 <tytso@valinux.com> |
| |
| * get_device_by_label.c: Improve /proc/partitions parsing in |
| fsck, and speed up fsck -a. |
| |
| 2000-07-13 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.19 |
| |
| 2000-07-13 <tytso@snap.thunk.org> |
| |
| * badblocks.8.in: Added text explaining that the -n and -w options |
| are mutually exclusive. |
| |
| * badblocks.c (usage): Fix usage message to make it clear that the |
| block count must be specified if the starting block is to |
| be specified. (The starting block should be a option, in |
| the long run.) |
| |
| * badblocks.c (test_nd): Save and restore the currently_testing |
| variable before going into the write verification loop. |
| This avoids a loop termination problem if the last block |
| on the disk is bad. Also, turn off the SIGALRM signal |
| while restoring blocks after the user types ^C. The |
| num_saved variable is now static so that it won't get |
| clobbered by a longjmp. buf_used and bb_count are no |
| longer static, since they aren't used by the cleanup |
| routines anymore. |
| |
| * badblocks.c (main): Removed an unsued varaible (buf_size). |
| Fixed bad getopt argument that didn't allow the 'b' option |
| to take an argument. Added error checking when parsing |
| the starting block number. Fixed lint warning in fscanf |
| format string. |
| |
| 2000-07-06 Theodore Ts'o <tytso@valinux.com> |
| |
| * fsck.c (execute, wait_one): Treat fsck.ext3 the same as |
| fsck.ext2 (because they are the same) for the purposes of |
| the progress bar display logic. |
| |
| * tune2fs.8.in: Update manual page to document what happens if |
| max_mount_count is negative. |
| |
| * tune2fs.c (main): Allow setting the maximal count value to be |
| negative, since the kernel interprets that as forcing a |
| check. |
| |
| * fsck.c (lookup, load_fs_info, check_all): Use lazy evaluation |
| for calling interpret_device(), since this requires root |
| privileges if the partitions need to be scanned. |
| Otherwise, it's not possible to do non-proot fsck's for |
| removeable devices such as floppies if there are any |
| LABEL= or UUID= entries in /etc/fstab. |
| |
| * badblocks.c (check_mount, main): Check to see if the filesystem |
| is mounted before doing a read/write or non-destructive |
| test. This can be overriden using the new -f option. |
| |
| * badblocks.8.in: Update manual page to reflect that the |
| blocks-count parameter is now optional. Also properly |
| document the start-block parameter. Added documentation |
| for the -f option. |
| |
| * badblocks.c (main): Allow the blocks-count parameter to be |
| optional. If it's not specified, use the size of the |
| device as a default. |
| |
| 2000-07-05 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c (test_nd): Significantly simplify the logic so that |
| it's more obviously what's going on. Fixed a few |
| potential cases which weren't handled correctly in the |
| old, overly complicated logic. |
| (flush_bufs): Now doesn't take a second argument, and |
| always forces a sync; this is required before it's really |
| safe to call BLKFLSBUF, at least for some kernels. |
| |
| 2000-05-29 Theodore Ts'o <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): Add a much more specific error message if the |
| filesystem size is defaulted and get_device_size returns a |
| size of zero. Otherwise, users get a confusing "invalid |
| argument while passed to ext2 library" error message. |
| |
| 2000-05-08 Theodore Ts'o <tytso@valinux.com> |
| |
| * fsck.c (interpret_device): Add better error messages if a UUID= |
| or LABEL= specification is given. |
| |
| * mke2fs.c (main): We forcibly turn off the filetype feature if |
| the OS is the hurd, since the hurd doesn't support it. |
| (And since the hurd allows the transmogrification of files |
| to special files and vice versa --- for no good reason |
| that I can understand --- it can't support the filetype |
| feature for the forseeable future, either.) |
| |
| * mke2fs.c (proceed_question): Fix reversed sense of |
| proceed_question that was busted due to the |
| internationalization patch. Fixed bug where if |
| proceed_question was called twice, the input buffer wasn't |
| cleared of the previous question's newline. |
| |
| Thu Apr 6 17:50:25 2000 Theodore Y. Ts'o <tytso@signal.thunk.org> |
| |
| * badblocks.c (flush_bufs): Use fsync() if the system doesn't |
| support fdatasync(). |
| |
| 2000-04-03 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c, dumpe2fs.c, e2label.c, mke2fs.c, tune2fs.c, |
| uuidgen.c: For platforms that don't define optarg.h, |
| manually define optarg and optind. |
| |
| * badblocks.8.in: Updated manual page with suggestions from David |
| Beattie. |
| |
| * badblocks.c (test_nd): Generalized cleanup and bug-fixes. We |
| now explicitly clear out the signal handlers to prevent a |
| longjmp to a deactivated stack frame. |
| (test_rw): Fixed a signed vs. unsigned comparison error. |
| |
| * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, lsattr.1.in, |
| mklost+found.8.in, tune2fs.8.in: Update Remy Card's e-mail |
| address. |
| chattr.1.in: Update which attributes aren't supported. |
| |
| 2000-02-09 Theodore Ts'o <tytso@valinux.com> |
| |
| * chattr.1.in: |
| * lsattr.1.in: Change "version" to "version/generation number". |
| |
| * chattr.1.in: Fix stupid file vs filesystem typo. |
| |
| * tune2fs.c Fix spelling error (spare vs sparse). |
| |
| * mke2fs.c (PRS): Add safety check to make sure the number of |
| blocks doesn't exceed 32 bits on a 64 bit machine. |
| |
| * chattr.c: Random cleanup; file-only variables are now static. |
| Options for setting/clearings flags put into order, and |
| #ifdef's removed (since we now use a built-in header |
| file). Add error message if user tries to set and reset |
| the same flag. |
| |
| * lsattr.c: Random cleanup; file-only variables are now static. |
| The -l "long" listing has been changed to look nicer. |
| Options names have been renamed to be more descriptive. |
| |
| 2000-02-06 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, e2label.c, findsuper.c, |
| fsck.c, get_device_by_label.c, lsattr.c, mke2fs.c, |
| mklost+found.c, nls-enable.h, partinfo.c, tune2fs.c, |
| uuidgen.c: Add Internationalization support as |
| suggested by Marco d'Itri <md@linux.it>. |
| |
| * badblocks.c: Fix non-destructive read/write patches from David |
| Beattie. Non-standard variable-length automatic arrays |
| removed. Non-destrutive write test fixed so that logic is |
| clearer and more provably correct. (I believe the old |
| code had a bug where the disk data wasn't restored if it |
| was interrupted at the wrong time.) |
| |
| * badblocks.8.in: Document new options in man page. |
| |
| 2000-02-02 Theodore Ts'o <tytso@valinux.com> |
| |
| * fsck.c (interpret_device): If there was an attempt to interpret |
| a device specification of the type "UUID=" or "LABEL=", |
| and it fails, check to see if /proc/partitions is |
| readable. If not, print a warning message about /proc |
| perhaps not being mounted, and exit. |
| |
| * mke2fs.c (check_plausibility): Remove unneeded #include of |
| linux/fs.h. Add #define of MAJOR if necessary. |
| |
| * partinfo.c: Remove unneeded #include of linux/fs.h |
| |
| 2000-01-19 Theodore Ts'o <tytso@valinux.com> |
| |
| * tune2fs.c (usage): Update the usage message to correctly |
| document the -s option. |
| |
| 2000-01-18 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c: Folded in patches David Beattie <dbeattie@usa.net>. |
| Need to do cleanup before release: use of GCC extensions |
| (dynamic arrays); unclean coding tricks (use of || instead |
| of if statements, etc.). Comments from David Beattie: |
| |
| "I added non-destructive write-testing, and quite a few |
| other features. The non-destructive write testing, |
| triggered by new "-n" command-line option, will write test |
| patterns to the disk, but only after reading data off the |
| disk into memory. Then, comparing the test patterns gives |
| a result as to whether or not those sectors are reliable. |
| Finally, the original data is written back. |
| |
| To streamline this operation, I added another option, "-c |
| blocks_at_once", which will give the number of disk blocks |
| to process at one time (mnemonic--"count"). I made this |
| default to 16 (as in the read-only testing mode), and also |
| affect the read-only testing mode. Of course, read-only |
| mode needs (count * block_size) amount of memory, and |
| non-destructive read-write needs 3 times that much, so it |
| makes sense to do the calculations and not overrun |
| available RAM...I would have liked to implement and |
| auto-memory-usage heuristic, but I have no idea if it's |
| even possible to determine the amount of free memory on a |
| Unix system except by reading /proc entries, and that |
| didn't seem portable. I did NOT make this blocks_at_once |
| affect the behavior of the test_rw routine, as it is |
| processing the whole disk at once, anyway. |
| |
| I *think* that I got higher detection rates on my hard |
| drive using random test data than patterned test data, so |
| my non-destructive mode initializes its test data buffer |
| randomly. |
| |
| I fixed a typo in flush_bufs that caused the ioctl |
| BLKFLSBUF to never get compiled into the program. |
| |
| Also, I added an "undocumented" (I didn't put it into the |
| usage message; you can if you think it's useful) "-h" |
| option to specify the host device to flush--useful if you |
| want to test out my "non-destructive" code on something |
| other than a hard drive, such as a file on a hard drive, |
| and want the host hard drive to flush. |
| |
| I provided support for an "input" file (via option "-i", |
| similar to the "-o" option)...containing a list of |
| already-known bad blocks; it will skip testing those |
| blocks, thus adding speed to the bad block scan (on my |
| computer, hitting a physically bad block causes a |
| half-second-or-more freeze as the kernel waits for the |
| hard drive to give up and reset itself; pretty annoying |
| when you already know the block is bad from a previous |
| scan). |
| |
| Finally, the real killer, the persistent re-scan (option: |
| "-p num_passes") that I created will, if desired, |
| persistently re-scan the drive until it has completed a |
| user-decidable number of passes in a row during which no |
| new bad blocks are found. On my drive, I would see |
| behavior that a certain percentage of bad blocks would be |
| found with each pass (it was not reliable in the defective |
| areas!), so I wanted it to check it over and over again |
| until it didn't find any more, several times. Perhaps |
| this will be useful to others. Defaults of course to |
| zero, meaning it will stop after the first pass. I used |
| "-p 2" on my drive, and it ran for 2 1/2 days...then used |
| "-p 3" a couple days later and it ran for a few more |
| hours, and since then the rest of my drive has been |
| completely reliable. |
| |
| Implementation of these last two features, "-i" and "-p", |
| I did using a bb_list from libext2fs. I debated whether |
| bad blocks input through "-i" should be output into the |
| "-o" file (or stdout, of course), and decided against it, |
| but left the code to do so in place, commented out, just |
| for your information. |
| |
| In order to maintain data integrity upon interruption of a |
| non-destructive-write test, I created a signal handler |
| which I install which will write back whatever original |
| disk data is in the buffers upon any of the fatal signals |
| (except SIGKILL, of course). |
| |
| Of course, ideally, the new options would be reflected in |
| the badblocks manual page, but I am not experienced at |
| manual page modification; if you decide my patch to |
| badblocks should be incorporated into the distribution, I |
| could learn how to update the manpage and other |
| documentation, or you could do it for me after exercising |
| your opinions, if you have any, on exactly what the |
| command-line parameters should be called and which ones |
| should be in the distribution." |
| |
| 2000-01-07 Theodore Ts'o <tytso@valinux.com> |
| |
| * Really fix the bug where "fsck -As" will actually allow |
| interactive fsck's. (For those people who like to do |
| interactive fsck's in the /etc/rc scripts!?!) |
| |
| 1999-11-23 <tytso@valinux.com> |
| |
| * tune2fs.8.in: Fix man page so that the sparse_super filesystem |
| option is properly named. |
| |
| 1999-11-22 <tytso@valinux.com> |
| |
| * mke2fs.c: Change log2() and log10() to int_log2() and |
| int_log10() to avoid namespace collisions. Change #ifdef |
| sparc to #ifdef __sparc__. |
| |
| 1999-11-19 <tytso@valinux.com> |
| |
| * Makefile.in (distclean): Remove TAGS and Makefile.in.old from |
| the source directory. |
| |
| 1999-11-10 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.18 |
| |
| 1999-11-10 <tytso@valinux.com> |
| |
| * mke2fs.8.in: Update manual page so that the sparse_option |
| filesystem option is properly named. |
| |
| 1999-11-04 <tytso@valinux.com> |
| |
| * fsck.c (main): Move setting of the interactive flag to before |
| the call to check_all(), so that people who try to use |
| fsck -As can do so interactively. |
| |
| 1999-10-26 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.17 |
| |
| 1999-10-26 <tytso@valinux.com> |
| |
| * fsck.c (PRS, device_already_active): Add debugging hook; if the |
| environment variable FSCK_FORCE_ALL_PARALLEL is set, then |
| force all fsck runs to happen in parallel. |
| |
| * get_device_by_label.c (has_right_label): Fixed bug where code |
| used a strncmp to compare a binary UUID value which may |
| contain a NULL. Fixed GCC warnings; added const to char * |
| typed variables. Eliminated non-portable use of u_char. |
| |
| * mke2fs.c (PRS): Fix gcc warnings; add const to some char * |
| variables, including in struct mke2fs_defaults. |
| (set_fs_defaults): Changed parameter name to avoid |
| gcc warnings. |
| |
| * fsck.c (wait_one): Fix gcc warnings; add #include for ctype.h, |
| add const to char * variables, and use NOARGS to declare |
| functions that take no arguments. Also fix a memory leak |
| in execute() where we weren't freeing argv[] after forking |
| the child process. |
| |
| * chattr.c: Add hack to compile in a definition for S_ISLNK so we |
| can successfully compile even with warnings turned on. |
| |
| 1999-10-25 <tytso@valinux.com> |
| |
| * mke2fs.c (show_stats): Capitalized Hurd to make the GNU types |
| happy. |
| (PRS): Use __u64 instead of long long for portability |
| reasons. Also moved #include of sys/stat.h inside #ifdef |
| HAVE_LINUX_MAJOR_H for portability reasons. |
| |
| * fsck.c (execute): Fix really stupid bug in the linked list |
| management which caused fsck in parallel mode to go into |
| an infinite loop. |
| |
| 1999-10-22 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.16 |
| |
| 1999-10-22 <tytso@valinux.com> |
| |
| * tune2fs.c (main): Add a new option -O which allows the user to |
| set and clear certain "safe" filsystem feature flags. |
| Currently, the only ones which are supported for |
| modification are sparse_superblock and filetype. |
| |
| * mke2fs.c (PRS): Add new option -O which allows the user to |
| request filesystems with specific filesystem options. By |
| default on 2.2 and later systems, create filesystems that |
| have both file type information and sparse superblocks. |
| |
| 1999-10-21 <tytso@valinux.com> |
| |
| * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, e2label.8.in, |
| fsck.8.in, lsattr.1.in, mke2fs.8.in, mklost+found.8.in, |
| tune2fs.8.in, uuidgen.1.in: Update man page to use a more standard |
| format (bold option flags and italicized variables), as |
| suggested by Andreas Dilger (adilger@enel.ucalgary.ca) |
| |
| 1999-10-14 <tytso@valinux.com> |
| |
| * tune2fs.c (main): Fix typo (double spaces) in messages regarding |
| changing the sparse superblock option |
| |
| * fsck.c (wait_one): If the fsck process just started, wait a |
| second before sending a SIGUSR1, to give it a chance |
| to set the signal handler; otherwise, fsck will die on an |
| unhandled SIGUSR1. |
| |
| 1999-09-15 <tytso@valinux.com> |
| |
| * mke2fs.c (show_stats): Fix display bug when printing out the |
| number of superblocks. Suggested by Yann Dirson. |
| |
| 1999-09-08 <tytso@valinux.com> |
| |
| * partinfo.c: Fix minor compilation bugs pointed out by Yann |
| Dirson. |
| |
| * mke2fs.c: Don't turn on sparse superblocks by default on pre-2.2 |
| kernels. |
| |
| * mke2fs.8.in: Add the possible valid block sizes for mke2fs. |
| Document the -n flag, and the new defaults for the -s |
| flag. |
| |
| * dumpe2fs.c, dumpe2fs.8.in: Add new options -f (force) and -h |
| (header-only). |
| |
| 1999-08-13 <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): Fix logic for turning on/off the sparse |
| superblock option. |
| |
| 1999-07-18 Theodore Ts'o <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.15 |
| |
| 1999-07-18 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS, set_fs_defaults): Add new option -T which allows |
| the user to specify the how the filesystem is to be used. |
| Mke2fs now chooses the filesystem parameters automatically |
| based on the size of the filesystem and the intended use |
| of the filesystem. Add new option -n which simply goes |
| through the calculations to determine the parameters of |
| the filesystem the system would make. |
| |
| 1999-07-18 <tytso@valinux.com> |
| |
| * fsck.c, fsck.h: Add support for new option -C. This option will |
| automatically manage e2fsck processes so that they will |
| print completion/progress bars. If multiple filesystems |
| are being checked, arrange to make sure that only one |
| e2fsck process is displaying a progress bar at a time. |
| |
| 1999-07-08 <tytso@valinux.com> |
| |
| * badblocks.c (do_test): Don't complain if the write error occurs |
| on a non-block boundary. This is perfectly common when |
| using blocksizes larger than 1k. |
| |
| 1999-07-03 <tytso@valinux.com> |
| |
| * uuidgen.c: Add option parsing so that user can ask for either a |
| time-based UUID or a random-based UUID. |
| |
| 1999-07-02 <tytso@valinux.com> |
| |
| * fsck.c: Added support for LABEL= and UUID= specifications for |
| the filesystem's device, to match what recent mount |
| programs can support. Also, close stdin when doing fsck |
| -A or when checking more than one filesystem at a time, so |
| that e2fsck doesn't try to ask interactive questions if |
| the filesystem appears to be mounted. |
| |
| * get_device_by_label.c: New file added to support LABEL=foo and |
| UUID=bar type specifications. |
| |
| 1999-07-01 <tytso@valinux.com> |
| |
| * badblocks.c: Make the "done" string include enough spaces to |
| clear out a large block number. |
| |
| 1999-06-29 <tytso@valinux.com> |
| |
| * mke2fs.c (check_mount): Allow a filesystem to be made even if it |
| appears mounted if the force option is given. |
| |
| 1999-06-24 <tytso@valinux.com> |
| |
| * mke2fs.8.in: Fix typo in man page which caused the badblocks |
| command to not show up in the "SEE ALSO" section. |
| |
| 1999-05-02 <tytso@rsts-11.mit.edu> |
| |
| * findsuper.c: Added documentation from aeb@cwi.nl; some minor |
| code cleanups. |
| |
| 1999-05-20 <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c, dumpe2fs.8.in: Added new command-line options which |
| allow a filesystem expert to specify the superblock and |
| blocksize when opening a filesystem. This is mainly |
| useful when examining the remains of a toasted filesystem. |
| |
| 1999-03-11 Andreas Dilger <adilger@enel.ucalgary.ca> |
| |
| * uuidgen.c, uuidgen.1.in: Created command-line utility to |
| generate UUIDs. |
| |
| 1999-03-14 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (fsck_device, execute): Don't dereference a null pointer |
| when checking a filesystem not in /etc/fstab. |
| |
| 1999-02-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (fsck_device): Print an error message if the user passes |
| in a device or directory name which isn't found in /etc/fstab. |
| Allow the location of /etc/fstab to be overridden by |
| the FSTAB_FILE environment variable. |
| |
| 1999-01-30 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (write_inode_tables): Add kludge code so that when the |
| MKE2FS_SYNC environment variable is set, mke2fs will sync |
| every MKE2FS_SYNC block groups, while it is writing out |
| the inode tables. This is to work around a VM bug in the |
| 2.0 kernel. I've heard a report that a RAID user was able |
| to trigger it even using a 2.2 kernel. |
| |
| 1999-01-16 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (execute, wait_one): Modified routines so that they |
| accurately create an fsck_instance even when the noexecute |
| flag is set. This allows for accurate debugging of the |
| fsck pass structure. |
| (check_all): When the verbose flag is given twice, print |
| debugging information about when fsck is waiting for jobs |
| to finish. |
| |
| 1999-01-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.14 |
| |
| 1999-01-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.8.in: Clarified and expanded the documentation for the -A |
| switch. |
| |
| 1999-01-07 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (load_fs_info): If the pass number field is missing, it |
| needs to be treated as zero. |
| |
| 1999-01-05 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS): Add -N option to allow the user to specify |
| exactly how many inodes he/she wishes. |
| |
| * chattr.c, lsattr.c: Only print the version information for the |
| program if the -V option is given. |
| |
| * chattr.c: Ignore symbolic links when doing a recursive descent |
| through a directory. |
| |
| 1999-01-01 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (load_fs_info, parse_fstab_line): Ignore fstab lines |
| are commented out. Also allow blank lines in the |
| /etc/fstab file. |
| (execute): In verbose mode, print the mountpount of the |
| filesystem which we are checking (user request). |
| |
| 1998-12-30 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c: Add definition of SCSI_BLK_MAJOR if not defined, for |
| compatibility with Linux 1.2.13 header files. |
| |
| 1998-12-15 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.13 |
| |
| 1998-12-07 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.8.in: Fixed stupid typo ("Raid options are _comma_ |
| seperated", instead of common separated) |
| |
| 1998-12-03 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Updated dependencies. |
| |
| 1998-11-27 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of |
| relying on getmntent(). This has the advantage of |
| allowing us to properly handle missing pass numbers correctly. |
| |
| 1998-11-13 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.8.in: Fix minor display bug in the nroff. |
| |
| * mke2fs.c (show_stats, write_inode_tables): Use the log10 |
| function to calculate the display of block numbers so that |
| things look nice on an 80 character display. |
| |
| 1998-10-12 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (usage): Add the sparse-super-flag to the usage |
| message. |
| |
| 1998-07-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.12 |
| |
| 1998-07-04 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * findsuper.c (main): Print the block group number which is now |
| being written by e2fsprogs. |
| |
| 1998-06-25 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (ignore): Remove unused variable cp. |
| |
| * chattr.c (fatal_error): |
| * tune2fs.c (usage): |
| * lsattr.c (usage): |
| * dumpe2fs.c (usage): |
| * badblocks.c (usage): Remove volatile from declaration. |
| |
| * fsck.c: Change use of strdup to be string_copy, since we don't |
| trust what glibc is doing with strdup. (Whatever it is, |
| it isn't pretty.) |
| |
| 1998-06-19 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS): Add a -V option which prints the version number |
| and exit. |
| |
| 1998-05-14 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (ignore): Remove check for filesystems with the noauto |
| option. |
| |
| 1998-03-30 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Change to use new installation directory variables |
| convention. Fix uninstall rules to take $(DESTDIR) into |
| account. Remove cat8dir and cat1dir from the installdirs |
| target, since modern man package don't necessarily put the |
| cat directory in /usr/man/cat?. |
| |
| 1998-03-29 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2label.8.in: New man page to document the e2label function. |
| |
| * e2label.c: Fix -Wall warning by making functions static. |
| |
| 1998-03-28 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Document that the append-only attribute may |
| only be set or cleared by the superuser. |
| |
| * Update all manual pages to that the availability section is |
| up-to-date. |
| |
| * e2label.8.in, tune2fs.8.in: Update manual page to state that |
| labels must be no longer than 16 characters, or they will |
| be truncated. |
| |
| * e2label.c (change_label), tune2fs.c (main): If the label is |
| longer than 16 characters, print a warning message stating |
| that the label will be truncated. |
| |
| * mke2fs.c (PRS): If the user specifies a filesystem size, and |
| it's larger than the apparent size of the device, print a |
| warning message and ask if the user wants to proceed. |
| |
| 1998-03-21 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Fixed spelling typo in warning |
| message. Fixed up -Wall warnings in file. |
| |
| Sun Mar 8 22:21:48 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * partinfo.c (main): The ioctl BLKGETSIZE requires a long, not an |
| int. |
| |
| Sun Feb 1 16:53:36 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.8: Update documentation to note that output format |
| of badblocks is suitable for use with e2fsck -l or |
| mke2fs -l. |
| |
| * mke2fs.c (handle_bad_blocks): Fix bug so that all groups with |
| bad superblock backup blocks are printed (not just the |
| first one). |
| |
| Mon Dec 1 17:01:04 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.8.in: Add documentation for the -s option. |
| |
| Fri Oct 24 23:37:52 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c: |
| * chattr.c: Remove #include of getopt.h, since it's not needed. |
| |
| * tune2fs.c (main): |
| * lsattr.c (main): |
| * badblocks.c (main): |
| * dumpe2fs.c (main): |
| * mke2fs.c (PRS): Make the variable which getopt returns into be |
| an int, so that it won't lose on platforms where char is |
| unsigned. |
| |
| Fri Oct 3 13:38:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (parse_raid_opts): Make parse_raid_opts return a void, |
| to fix a -Wall warning. |
| |
| Mon Sep 15 22:07:12 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): |
| * mklost+found.c (main): |
| * lsattr.c (main): |
| * dumpe2fs.c (main): |
| * chattr.c (main): |
| * badblocks.c (main): Declare main to return an int, as required. |
| Make sure main always ends with an exit(0). (Some |
| programs weren't doing this, and thus were returning a |
| random exit value.) |
| |
| Mon Jul 14 15:27:29 1997 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * e2label.c: New file contributed by Andries Brouwer which |
| provides an easy-to-use interface to modify the filesystem |
| label. |
| |
| * Makefile.in (SPROGS): Add Makefile support to build e2label |
| |
| Tue Jun 17 01:33:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.11 |
| |
| Mon Jun 16 23:37:54 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (show_stats): Adjust the number of columns printed when |
| displaying the superblock backups to avoid running over |
| 80 columns when making a really big disk. |
| |
| Thu May 8 22:22:08 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, fsck.8.in, |
| mke2fs.8.in, tune2fs.8.in: Fix minor typos and grammer |
| oops found by Bill Hawes (whawes@star.net). |
| |
| * mke2fs.c (test_disk): Pass the blocksize to the bad blocks |
| command so that all of the filesystem gets tested in the |
| case where the blocksize 2048 or 4096. |
| |
| Thu Apr 24 12:16:42 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * Release of E2fsprogs version 1.10 |
| |
| Thu Apr 24 09:52:47 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * mke2fs.c: Added new option -R, which specifies RAID options. |
| Currently the only supported RAID option is "stride" which |
| specifies the stripe width in RAID filesystem. This is |
| used to aid in the placement of the inode and block |
| bitmaps. |
| |
| * mke2fs.8.in, tune2fs.8.in: Added warnings that the sparse |
| superblock option isn't yet supported by most kernels. |
| |
| Wed Apr 23 22:42:51 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * mke2fs.c (PRS): Make the default filesystem revision be 0, not |
| 1. (Since some people are still worried about 1.2.13 |
| compatibility). |
| |
| Thu Apr 17 12:23:38 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.09 |
| |
| Fri Apr 11 18:57:24 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Updated man page so that the 'A' attribute is |
| specified everywhere. |
| |
| * chattr.c (usage): Added usage message for the 'A' attribute. |
| |
| Fri Apr 11 18:56:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.08 |
| |
| Thu Apr 10 07:08:03 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c (list_desc): List the offsets of the inode and block |
| bitmaps, and the inode table. List the block boundaries |
| for the groups. |
| |
| Sat Apr 5 11:55:52 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): Implement the -s flag allows the user to |
| set and reset the sparse superblock flag. |
| |
| * mke2fs.c (PRS): By default generate DYNAMIC revision |
| filesystems. The -s flag controls whether or not the |
| sparse superblock flag is set. |
| (PRS): Change to allow the user to specify the true |
| maximum number of blocks per group to reflect the |
| blocksize. |
| |
| Wed Mar 12 13:32:05 1997 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs version 1.07 |
| |
| Thu Mar 6 17:15:05 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (create_root_dir): Set the root directory's i_uid and |
| i_gid to be the real user and group id. |
| |
| Tue Mar 4 10:14:33 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Add more intelligent error |
| messages when the device doesn't exist. |
| |
| Sat Mar 1 10:43:32 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (main): Fix bug where the PATH environment variable isn't |
| set when it is unset. |
| |
| Tue Jan 14 12:30:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (write_inode_tables): Fixed bug in write_inode_tables |
| where a loop variable was getting reused in a nested loop. |
| This caused the inode table to not be correctly |
| initialized. |
| |
| Thu Jan 2 00:00:37 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * lsattr.c, chattr.c: Include string.h, since we use memcpy(). |
| |
| * findsuper.c: Use time_t for ctime(), not __u32. |
| |
| Sat Dec 28 23:39:18 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.c: Adapted -vv modifications from Rik Faith so that |
| they frequently update the block number field. |
| |
| * badblocks.8.in: Document the optional start-block parameter |
| |
| Mon Oct 14 11:52:58 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c: Updated to use new ext2fs_allocate_tables() function. |
| |
| Tue Oct 8 02:02:03 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.06 |
| |
| Mon Oct 7 00:56:24 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Documented the 'A' (noatime) attribute. |
| |
| * dumpe2fs.c (main): Change EXT2_SWAP to EXT2_FLAG_SWAP for |
| consistency's sake. |
| |
| Sun Sep 22 16:18:47 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.c (decode_arg): Add support for the 'A' (noatime) flag. |
| |
| Thu Sep 12 15:23:07 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.05 |
| |
| Sat Sep 7 07:34:11 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): Add support for new option -C, which sets the |
| current number of mounts. |
| (main): Allow the interval to be specified in seconds, |
| mostly for debugging. |
| |
| Tue Aug 27 17:27:43 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * Makefile.in (SMANPAGES): Use @FSCK_MAN@ instead of fsck.8. |
| (SPROGS): Use @FSCK_PROG@ instead of fsck. |
| |
| Thu Aug 22 00:51:44 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (zap_bootblock): Don't do zap_bootblock on a |
| sparc. |
| |
| Tue Aug 20 00:15:46 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.c (main): Fixed bug so that chattr -v works. (Bug report |
| and fix sent by Charles Howes, chowes@eznet.ca) |
| |
| Fri Aug 9 11:52:42 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.8.in: |
| * tune2fs.c: Added support for the -L option which sets the volume |
| label, the -M option which sets the last mounted |
| directory, and the -U option which sets the filesystem UUID. |
| |
| * mke2fs.8.in: |
| * mke2fs.c: Added support for the -o option, which overrides the |
| creator OS. Generate a UUID for the filesystem, if |
| applicable. Added support for the -L option which sets |
| the volume label, and the -M option which sets the last |
| mounted directory. |
| |
| Sat Jun 22 17:43:17 1996 Remy Card <card@bbj.linux.eu.org> |
| |
| * chattr.c (decode_arg): Integrated Michael Nonweiler's fix to |
| avoid a segmentation fault when the "-v" option is used |
| and no version number is specified. |
| |
| Thu May 16 11:12:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.04 |
| |
| Wed May 15 21:15:43 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (fsck): fsck doesn't need to be linked with the ext2 |
| libraries. |
| |
| Wed Mar 27 00:33:40 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.03 |
| |
| Thu Mar 7 03:43:20 1996 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS): Add (for development only) support to |
| specify revision and inode size of the new filesystem. |
| |
| Tue Mar 5 03:51:35 1996 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.8.in: Fix a few minor typo's in the man page. |
| |
| * mke2fs.c (reserve_inodes): Add support for dynamic first inode |
| revision. |
| |
| Mon Feb 5 22:19:49 1996 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (check_all, PRS): Added new flag -P, which turns on the |
| parallel root option. This allows you to check the root |
| filesystem in parallel with the other filesystems. Note |
| that this is not the safest thing in the world to do, |
| since if the root filesystem is in doubt things like |
| the e2fsck executable might be corrupted! But some |
| sysadmins, who don't want to repartition the root |
| filesystem to be small and compact, may really want this |
| option turned on. |
| |
| Wed Jan 31 11:06:08 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.02 |
| |
| Tue Oct 30 21:14:12 1995 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Add check to warn user if they |
| are trying to mke2fs the whole disk. (/dev/hda |
| vs. /dev/hda1) |
| |
| Fri Dec 15 19:09:56 1995 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (check_all): If we break out of the loop because we are |
| serializing and have just started at fsck we haven't |
| finished the pass. We need to go round again in case there |
| are more filesystems to be done in this pass. (Patch |
| submitted by Mike Jagdis) |
| |
| Sat Dec 9 10:07:16 1995 <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c (in_use): test_bit() was renamed to |
| ext2fs_test_bit(). |
| |
| Mon Oct 30 20:21:18 1995 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (fsck_device): Check fstype instead of type; this was a |
| stupid typo which caused coredumps in some cases. |
| |
| Thu Oct 26 12:05:18 1995 <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (install): Strip programs when they are installed. |
| |
| Fri Aug 18 15:10:40 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * mke2fs.c (PRS): Move call of check_mount() from main() to PRS(), |
| so we do the check to see if the filesystem is mounted |
| *before* we try to determine the size of the device. |
| |
| Wed Sep 6 23:34:07 1995 Remy Card <card@bbj> |
| |
| * fsck.c (load_fs_info): Load the informations from /etc/fstab in |
| the same order. |
| |
| Thu Aug 17 22:33:09 1995 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_mount): Use the new ext2fs_check_if_mounted() |
| function to determine if the device is mounted. |
| |
| * mke2fs.c (PRS): Change call to use the new |
| ext2fs_get_device_size() function in order to determine |
| the size of the filesystem. Remove get_size() and |
| is_valid_offset(), which are no longer called. |
| |
| Fri Aug 11 08:26:24 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * fsck.c (fsck_device): Make sure fstype has been set by the user |
| and that it does not begin with "no" and the user has |
| specified exactly one type before using it as the type to |
| check. |
| |
| Fri Aug 11 14:17:18 1995 Remy Card <card@bbj> |
| |
| * badblocks.8: |
| * chattr.1: |
| * dumpe2fs.8: |
| * fsck.8: |
| * lsattr.1: |
| * mke2fs.8: |
| * mklost+found.8: |
| * tune2fs.8: Updated date and version number. |
| |
| Thu Aug 10 14:18:36 1995 Remy Card <card@bbj> |
| |
| * tune2fs.c: Fixed a bug which prevented the use of user and group |
| names with the -g and -u options. Thanks to Jean Christophe |
| ANDRE <progfou@mycrob.cafard.freenix.fr>. |
| |
| * mke2fs.8: |
| * tune2fs.8: Fixed a spelling error in Ted's name :-) |
| |
| Wed Aug 9 20:41:54 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * mke2fs.c (count_blocks): Divide the size by |
| EXT2_BLOCK_SIZE(¶m), instead of assuming that the |
| blocksize is always 1024 bytes. |
| |
| Sat Aug 5 12:00:51 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * mke2fs.c (PRS): Use malloc() instead of alloca() --- alloca() is |
| not portable!! In any case putenv() in some systems must |
| take a static character array or malloc()'ed memory; |
| passing memory allocated using alloca() to putenv() is not |
| advisable. |
| |
| * chattr.c (chattr_dir_proc): |
| * lsattr.c (lsattr_dir_proc): Use malloc() instead of alloca() --- |
| alloca is not portable! |
| |
| * fsck.c (fsck_device): If the filesystem type is specified by the |
| user using the -t option, let it override the type in |
| /etc/fstab. |
| |
| * fsck.c (strdup): Don't build strdup() if the system defines it. |
| |
| Mon Jun 12 19:15:10 1995 Theodore Y. Ts'o (tytso@dcl) |
| |
| * chattr.c, lsattr.c: Include <sys/types.h> for <dirent.h>'s |
| benefit. |
| |
| * The $(UPROGS) go in bin, not sbin. |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c, |
| tune2fs.c: Don't include <getopt.h> if it doesn't exist. |
| |
| Mon Jun 12 16:36:04 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c, |
| tune2fs.c: Only include getopt.h if HAVE_GETOPT_H is defined. |
| |
| Sat Jun 10 23:37:09 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * chattr.c: Include errno.h, since we use errno |
| |
| * fsck.c (load_fs_info): If HAVE_MNTENT_H is not defined, |
| explicitly initialize filesys_info to be NULL. |
| |
| * mke2fs.c: Include the stdio.h and errno.h header files |
| |
| Thu Jun 8 13:25:23 1995 Miles Bader <miles@churchy.gnu.ai.mit.edu> |
| |
| * mke2fs.c: Only include <linux/fs.h> if we can. |
| (get_size): Don't try to use the BLKGETSIZE ioctl unless it's defined. |
| (check_mount): Only check to see if the device is mounted if |
| HAVE_MNTENT_H is defined (by configure). |
| |
| * fsck.c (load_fs_info): Only try to get info about filesystems if |
| HAVE_MNTENT_H is defined (by configure). |
| (main): Allocate space for a new fsck_path instead of append to a |
| statically sized buffer. |
| (PRS): Use alloca to allocate the new path string, instead of |
| having a fixed size buffer (which was the wrong size anyway). |
| |
| * chattr.c (chattr_dir_proc): Use alloca to allocate space for a |
| filename instead of using a fixed-size buffer. |
| * lsattr.c (lsattr_dir_proc): Ditto. |
| * mklost+fond.c (main): Calculate the actual needed size for the |
| path buffer instead of using MAXPATHLEN (which not all systems have). |
| |
| * badblocks.c: Only include linux include files if we have them. |
| (flush_bufs): New function to flush a block device, optionally |
| syncing it first. This replaces other copies of this code. |
| (test_ro): Replace calls to ioctl with flush_bufs(). |
| (test_rw): Ditto. |
| |
| * Makefile.in: Rewritten to conform to GNU coding standards and |
| support separate compilation directories. |
| |
| Sat Mar 11 10:59:58 1995 Theodore Y. Ts'o <tytso@localhost> |
| |
| * mke2fs.c (main, zap_bootblock): Added new function |
| zap_bootblock() which clears the first 512 bytes of the |
| filesystem. This protects the filesystem from being |
| misidentified as a MS-DOS FAT filesystem. |
| |
| * badblocks.c (alarm_intr, test_ro, test_rw): Increase the space |
| allocated for printing the block numbers, so that the |
| display doesn't get corrupted when running badblocks on a |
| very large partition. |
| |
| * badblocks.c (do_test, test_ro, test_rw): Added missing cast to |
| ext2_loff_t, so that when checking a large device, |
| spurious seek errors aren't reported. |
| |
| * mke2fs.c (count_blocks): Declare mid to be of type ext2_loff_t |
| instead of type int, so that it works for filesystems |
| greater than 2 GB. (Fortunately count_blocks is only |
| called if the device does not support the BLKGETSIZE |
| ioctl, which most do.) |
| |
| * fsck.c (ignore): Add check to ignore filesystems with a pass |
| number of zero. (This check was accidentally deleted at |
| during 0.5b development.) |
| |
| Sat Dec 31 00:47:16 1994 <tytso@rsx-11.mit.edu> |
| |
| * mke2fs.c (new_table_block, alloc_tables, PRS, main): Add a new |
| option, -S, which only writes the superblock and group |
| descriptors. Useful for recovering when all of the |
| superblocks are corrupted somehow (as a last ditch |
| measure). |
| |
| Also, don't bother initializing the bitmap blocks in |
| alloc_tables(), since they will be overwritten at the end |
| anyway. (Should speed up mke2fs by a little.) |
| |
| Tue Dec 6 02:20:55 1994 <tytso@rsx-11.mit.edu> |
| |
| * fsck.c (main): Fix stupid typo where a null inst would be freed. |
| |
| * fsck.c (wait_one): Check WIFEXITED on status before trying to |
| extract the exit status. In other cases, return |
| FSCK_ERROR if the back end processor exited with a signal. |
| |
| Tue Nov 15 10:20:00 1994 Remy Card <card@bbj> |
| |
| * tune2fs.c (main): Fixed a bug which prevented the use of the |
| new options. |
| Added the `w' (week) suffix recognition in the check interval. |
| |
| Sun Nov 13 15:58:48 1994 (tytso@rsx-11) |
| |
| * fsck.c (load_fs_info): If the user has an obviously old |
| /etc/fstab file, issue a warning message and assume that |
| all partitions should be checked. |
| |
| Sat Nov 12 00:33:18 1994 (tytso@rsx-11) |
| |
| * dumpe2fs.c (list_desc): Update to new inode and block bitmap |
| structures. |
| |
| * mke2fs.c (create_root_dir): Create the root directory owned by |
| the effective uid. |
| |
| Mon Nov 7 22:04:37 1994 Remy Card <card@bbj> |
| |
| * tune2fs.c (main.c): Added support for new options: |
| -r reserved_blocks_count, -g reserved_gid, -u reserved_uid. |
| |
| Sun Aug 21 00:57:33 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * fsck.c (ignore): If the pass number is 0, ignore the filesystem. |
| |
| Wed Aug 17 21:55:03 1994 Remy Card (card@bbj) |
| |
| * badblocks.c (test_rw): Added verbose output like in the |
| read-only test. |
| |
| (do_test and test_rw): Use the llseek system call if available. |
| |
| * chattr.c: Added support for new attributes. |
| |
| * lsattr.c: Added support for long format. |
| |
| * mke2fs.c (usage): Fixed bogus usage message. |
| |
| (valid_offset): Use the llseek system call if available. |
| |
| Wed Aug 17 10:50:57 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * mke2fs.c (handle_bad_blocks): Check to see if a bad block is |
| where a backup superblock/group descriptor is stored. If so, |
| print a warning message and adjust the superblock counts so that |
| they are correct. (Otherwise, the bad block will get counted |
| twice and the # of free blocks count will be wrong.) |
| |
| (alloc_tables): Removed code which calcualated the free block |
| statistics, which was moved to lib/ext2fs/initialize.c. This |
| allows the bad block code to adjust the group descriptor |
| statistics if necessary. |