| Sat Jan 17 13:02:16 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.h: If EXT2_FLAT_INCLUDES is defined, then assume all of |
| the ext2-specific header files are in a flat directory. |
| |
| * dirinfo.c, ehandler.c, pass1.c, pass1b.c, pass2.c, pass5.c, |
| super.c, swapfs.c, unix.c: Explicitly cast all assignments |
| from void * to be compatible with C++. |
| |
| Tue Jan 6 11:30:24 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * unix.c (sync_disk): Remove sync_disk and calls to that function, |
| since ext2fs_close() now takes care of this. |
| |
| Mon Dec 29 14:45:42 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c, pass1b.c, pass2.c, pass3.c, swapfs, badblocks.c, |
| ehandler.c, unix.c: Change use of private to be priv_data, |
| to avoid C++ reserved name clash. |
| |
| Fri Nov 28 09:30:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead |
| of e2fsck_get_num_dirs, which has been removed. |
| |
| Tue Nov 25 15:54:35 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want |
| to compile and install flushb. |
| |
| Mon Nov 24 06:48:00 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (e2fsck_pass1_check_device_inode): For now, only check |
| to make sure the extra i_blocks in a device are cleared if |
| the immutable flag is set. |
| |
| * util.c (print_resource_track): Fix typo which caused the |
| time/resource tracking to print "Pass 1 :" instead of |
| "Pass 1: ". |
| |
| Thu Nov 20 16:02:23 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass3.c (expand_directory): Fix bug which could cause core dump |
| when expanding the directory, and the bitmaps hadn't yet |
| been read in. Also, only use ext2fs_write_dir_block when |
| writing a directory block, not when writing out a fresh |
| indirect block. |
| |
| Wed Nov 19 16:15:44 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (process_bad_block): Fix bug where first_block wasn't |
| getting incremented, which caused user to get a |
| "Programming error?" warning if there was a bad block in a |
| non-primary superblock/group_descriptor. Also fixed |
| another bug so that ext2fs_bg_has_super() is consulted, to |
| avoid problems when using a filesystem with the |
| sparse_groups option set and there are bad blocks at the |
| beginning of a group which doesn't have a superblock. |
| |
| Thu Nov 6 16:10:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c, pass2.c, pass3.c, pass4.c, pass5.c: Add calls to the |
| progress indicator function. |
| |
| * pass1.c (scan_callback): Add call to the progress feedback |
| function (if it exists). |
| |
| Tue Nov 4 09:45:36 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * super.c (check_super_block): Skip the device size check if the |
| get_device_size returns EXT2_EXT_UNIMPLEMENTED. |
| |
| * iscan.c (main): Don't use fatal_error() anymore. |
| |
| * pass1b.c, swapfs.c, badblocks.c: Set E2F_FLAG_ABORT instead of |
| calling fatal_error(0). |
| |
| * problem.c, pass3.c (PR_3_ROOT_NOT_DIR_ABORT, |
| PR_3_NO_ROOT_INODE_ABORT): New problem codes. |
| |
| * problem.c, pass2.c (PR_2_SPLIT_DOT): New problem code. |
| |
| * problem.c, pass1.c (PR_1_SUPPRESS_MESSAGES): New problem code. |
| |
| * problemP.h: New file which separates out the private fix_problem |
| data structures. |
| |
| * util.c, dirinfo.c, pass1.c, pass1b.c, pass2.c, pass5.c, super.c, |
| swapfs.c util.c: allocate_memory() now takes a e2fsck |
| context as its first argument, and rename it to be |
| e2fsck_allocate_memory(). |
| |
| Mon Nov 3 14:35:29 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * unix.c (main): Add a special case check for the error code EROFS |
| and display an appropriate error message for this case. |
| |
| * [lots of files]: Change ext2fs_read_inode, ext2fs_write_inode |
| to take the e2fsck context as their first argument. |
| Change dir_info.c routines to take an e2fsck_context, |
| renamed them to start with e2fsck_ to avoid namespace |
| issues, and changed them to store the directory |
| information inside the e2fsck context. |
| Added e2fsck_run() which calls all of the e2fsck passes in |
| the correct order, and which handles the return of abort |
| codes. Added abort processing, both via setjmp/longjmp |
| and via flags in the e2fsck context. Use a flag in the |
| e2fsck context instead of the restart_e2fsck global |
| variable. Change uses of free and malloc to |
| ext2fs_free_mem and ext2fs_get_mem. |
| |
| Fri Oct 31 01:12:43 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c, pass3.c: Rename new error codes to _ET_ in them for |
| consistency. |
| |
| Sat Oct 25 00:10:58 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass3.c (get_lost_and_found): Check error return of |
| EXT2_FILE_NOT_FOUND instead of ENOTDIR |
| |
| * pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY |
| instead of ENOTDIR |
| |
| Fri Oct 24 00:12:39 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * unix.c (PRS): Make the variable which getopt returns into be |
| an int, so that it won't lose on platforms where char is |
| unsigned. |
| |
| * pass1b.c (clone_file): Fix bug in error reporting in the case |
| where cs.errcode is non-zero. |
| |
| Sun Oct 19 21:12:11 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass*.c, super.c, unix.c, util.c, e2fsck.h: Place #ifdef |
| RESOURCE_TRACK around code which uses init_resource_track |
| and print_resource_track. (Not all systems have timeval) |
| |
| * super.c: Remove excess #includes which are not necessary. |
| |
| * e2fsck.h: Add #ifdef's for HAVE_SYS_TYPES_H and HAVE_SYS_TIME_H |
| |
| Fri Oct 3 13:40:03 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass*.c, super.c: Massive changes to avoid using printf and |
| com_err routines. All diagnostic messages are now routed |
| through the fix_problem interface. |
| |
| Sat Sep 6 17:13:28 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass2.c (check_dir_block): Check for duplicate '.' and '..' |
| entries. |
| |
| * problem.c, problem.h: Add new problem codes PR_2_DUP_DOT and |
| PR_2_DUP_DOT_DOT. |
| |
| Tue Sep 2 09:04:51 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * problem.c: Added new problem codes for some of the |
| superblock corruption checks, and for the pass header |
| messages. ("Pass 1: xxxxx") |
| |
| * util.c (print_resource_track): Now takes a description |
| argument. |
| |
| Mon Aug 25 10:23:13 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * super.c, unix.c, e2fsck.c: New files to separate out the |
| operating-specific operations out from e2fsck.c. |
| e2fsck.c now contains the global e2fsck context management |
| routines, and super.c contains the "pass 0" initial |
| validation of the superblock and global block group |
| descriptors. |
| |
| * pass1.c, pass2.c, pass3.c, pass4.c, pass5.c, util.c: Eliminate |
| (nearly) all global variables and moved them to the e2fsck |
| context structure. |
| |
| * problem.c, problem.h: Added new problem codes PR_0_SB_CORRUPT, |
| PR_0_FS_SIZE_WRONG, PR_0_NO_FRAGMENTS, |
| PR_0_BLOCKS_PER_GROUP, PR_0_FIRST_DATA_BLOCK |
| |
| Thu Aug 14 10:55:21 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * message.c: Add compression for the word "Illegal" |
| |
| * problem.c: Added entries for PR_2_BAD_CHAR_DEV and |
| PR_2_BAD_BLOCK_DEV |
| |
| Wed Aug 13 09:55:57 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (pass1, check_device_inode), pass2.c |
| (process_bad_inode): Use a more stringent test for a valid |
| device. |
| |
| Sun Aug 10 18:58:02 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (check_mount): Add stronger warning message about the |
| perils of running e2fsck on a mounted filesystem. |
| |
| Tue Jun 17 01:33:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.11 |
| |
| Thu Jun 12 00:25:31 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (mark_table_blocks): Mark the superblock and group |
| descriptor blocks first, so that any conflicts between |
| these and the bitmap or inode table blocks is noticed. |
| |
| * problem.c: Fix message printed out when a block or inode bitmap |
| conflicts with other fs data, has the correct group number |
| in it. |
| |
| Tue Jun 10 12:07:37 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass2.c (pass2): Check the error return from ext2fs_dblist_iterate. |
| |
| Thu May 8 22:45:27 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.8.in: Fix minor typos and grammer oops found by Bill |
| Hawes (whawes@star.net). |
| |
| * badblocks.c (read_bad_blocks_file): Pass the blocksize to the |
| bad blocks command so that all of the filesystem gets |
| tested in the case where the blocksize 2048 or 4096. |
| |
| Thu Apr 24 12:16:42 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * Release of E2fsprogs version 1.10 |
| |
| Mon Apr 21 22:43:08 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1b.c (pass1b): While scanning for inodes, simply skip inodes |
| where ext2fs_get_next_inode returns the |
| EXT2_ET_BAD_BLOCK_IN_INODE_TABLE error. |
| |
| Thu Apr 17 12:23:38 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.09 |
| |
| Fri Apr 11 18:56:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.08 |
| |
| Thu Apr 10 13:51:16 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1b.c (clone_file_block): If we clone a directory, we need to |
| update the dblist entry so that we check (and correct) the |
| right directory block. |
| |
| Sun Apr 6 09:13:12 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (process_block): Don't clear blocks references to |
| filesystem metadata; let pass 1B handle this case. |
| |
| * problem.c, problem.h: Add new problem, PR_1B_SHARE_METADATA. |
| |
| * pass1b.c (pass1d): Deal with a block which is shared with |
| filesystem metadata. |
| |
| * e2fsck.h: Make block_illegal_map be a global variable |
| |
| Sat Apr 5 11:51:58 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c, pass1.c (mark_table_blocks): Support the sparse_super |
| feature. |
| (get_backup_sb): New function which attempts to obtain the |
| correct backup superblock (if possible). |
| |
| Fri Apr 4 10:46:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (main): Check the version of the library, and warn if |
| the library is out of date; this happens generally due to |
| users who manually install e2fsprogs. |
| |
| * pass1.c (pass1_get_blocks): If the passed in inode number for |
| get_blocks isn't what we're expecting pass back |
| EXT2_ET_CALLBACK_NOT_HANDLED. |
| |
| Wed Mar 12 13:32:05 1997 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs version 1.07 |
| |
| Tue Mar 11 10:31:47 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * icount.c: New file which implements an inode count abstraction. |
| This significantly reduces amount of memory needed to |
| check really large filesystems. |
| |
| * pass1.c, pass2.c, pass3.c, pass4.c: Modified to use the icount |
| abstraction. |
| |
| Fri Mar 7 08:28:55 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * dirinfo.c (dir_info_iter): New function which allows iteration |
| over the directories in the dir_info map. |
| |
| * pass3.c (pass3, check_directory): Speed up pass 3 by iterating |
| over all directories in the dir_info structure, instead of |
| iterating all inodes looking for directories, and then |
| looking up the directories using get_dir_info(). |
| |
| Sat Feb 1 11:33:43 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (pass1, process_block): |
| * pass2.c (pass2): Use the ext2_dblist abstraction instead of |
| manual code to manage the directory block list information. |
| |
| * pass1.c (check_blocks), pass1b.c (pass1b), pass2.c |
| (deallocate_inode): Call the ext2 library routine |
| ext2_inode_has_valid_blocks() instead of |
| inode_has_valid_blocks(). |
| |
| * swapfs.c (swap_inodes): Add check so that we don't try to call |
| swap_inode_blocks unless the inode has valid blocks. |
| (Otherwise a long fast symlink might cause |
| swap_inode_blocks to erroneously get called.) |
| |
| Wed Jan 22 14:42:53 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * problem.c, problem.h: Added entries for PR_2_DOT_NULL_TERM and |
| PR_2_DOT_DOT_NULL_TERM. |
| |
| * pass2.c (check_dot, check_dot_dot): Make sure the new . and |
| .. entries are null-terminated, since the 2.0 kernel |
| requires this (for no good reason). |
| |
| Mon Jan 20 20:05:11 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (pass1): Set the EXT2_SF_SKIP_MISSING_ITABLE flag so |
| that we can recover from missing inode tables. |
| |
| * dirinfo.c (get_dir_info): If there are no directories in the |
| dir_info abstraction, don't core dump (because dir_info is |
| NULL). |
| |
| * e2fsck.c (main): Don't try using the backup superblocks if there |
| aren't any. |
| (check_super_block): If there are illegal inode table or |
| bitmaps, set the filesystem as being in error. |
| |
| Wed Jan 15 11:32:01 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass2.c (check_dir_block): Added check to make sure that rec_len |
| is a a multiple of 4 (so that the directory entries are |
| 4-byte aligned). |
| |
| Sat Dec 28 12:16:32 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (uninstall): Uninstall all programs in the PROGS |
| line. |
| (PROGS): Don't build and install the extend program by |
| default. |
| |
| |
| Sat Dec 7 16:41:02 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (process_inodes): Make sure the stashed_ino variable is |
| saved and restored as well. |
| (pass1): For fast sym links, skip the check_blocks |
| processing step altogether. |
| |
| Mon Dec 2 09:28:24 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * problem.c, message.c: New files, to completely refurbish how |
| filesystem problems are reported to the user. The |
| diagnostic messages are now encoded out in an easily |
| customizable, extensible format. The messages printed out |
| in preen mode are all on one line, and contain the device |
| name. |
| |
| Fri Nov 29 20:26:08 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * swapfs.c (swap_inodes): When swapping a filesystem, ignore |
| deleted files. |
| |
| * pass1.c (pass1): Ignore missing inode table errors during the |
| scan, and just skip past those inodes. |
| |
| * pass3.c (check_root): Remove root_ino argument, and assume that |
| the root inode must be EXT2_ROOT_INO. Move responsibility |
| of setting the parent of the root inode in the directory |
| inode structure to pass2(). |
| |
| * pass2.c (check_dir_block): Don't allow links to the root |
| directory. |
| |
| * dirinfo.c (add_dir_info): Remove last argument to add_dir_info, |
| since the inode is no longer used. |
| |
| Tue Oct 15 00:06:49 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (main): If the superblock magic number is wrong, or the |
| block group fails a sanity check, then automatically |
| restart trying to use the backup superblocks. |
| |
| * pass1.c (mark_table_blocks): Make the inode tables ahead of |
| everything else; in the case where a bitmap block overlays |
| the inode table, the inode table should take precedence. |
| |
| * pass2.c (maybe_clear_entry): Make the deleted/unused error |
| message fit on one line, since the error can happen during |
| a preen pass. (We eventually need to revamp the whole |
| e2fsck error reporting and prompting system, but that's a |
| job for another day.) |
| |
| Mon Oct 14 22:29:49 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (main): Read in the list badblocks into fs->badblocks |
| for the benefit of the inode scan functions. |
| |
| * pass1.c (pass1): If ext2fs_get_next_inode() returns an error |
| indicating that an inode is in a bad block, mark that |
| inode as being used, as well as in the inode "bb" map. |
| |
| * pass2.c (maybe_clear_entry): New function which generalizes the |
| error cases when a directory entry needs to be cleared. |
| (check_dir_block): If an inode is in the "bb" map, offer |
| to clear the directory entry, since the inode is in a bad |
| block. |
| |
| * pass4.c (pass4): If an inode is marked as used, but is is marked |
| in the "bb" map, don't process it as a disconnected inode. |
| |
| Tue Oct 8 02:02:03 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.06 |
| |
| Mon Oct 7 00:45:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (main): Print out the version number of the shared |
| library when using the -V option. |
| |
| * swapfs.c (swap_filesys): Change EXT2_SWAP to EXT2_FLAG_SWAP for |
| consistency's sake. |
| |
| * e2fsck.c (main): By setting EXT2_FLAG_MASTER_SB_ONLY, only write |
| out the backup superblocks when we know we have a valid |
| filesystem. |
| |
| Tue Oct 1 22:00:29 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * util.c (preenhalt): Make it explicit on preenhalt that running |
| e2fsck manually means without the -a or -p flag. |
| |
| Fri Sep 27 14:41:08 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (pass1): Add support for the EXT2_BOOT_LOADER inode. |
| (Linux/FT actually sets the mode bits, so we have to |
| handle it specially.) |
| |
| * e2fsck.c (check_if_skip): Print a message if the filesystem is |
| just dirty, so that the user knows that it's about to be |
| checked (since this will take a while). |
| |
| Mon Sep 16 17:00:01 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass4.c: If a disconnected inode is zero-length, prompt to |
| delete it instead of connecting it to lost+found. |
| |
| Thu Sep 12 15:23:07 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.05 |
| |
| Fri Aug 30 20:24:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass4.c (pass4): If the user refuses to connect an unattached |
| inode to lost+found, don't try to set i_links_count. This |
| is bad, since if the user says yes, the inode will be |
| marked as unused, which is not necessarily the right |
| thing, especially since the rest of the cleanup doesn't |
| happen here. |
| |
| * pass2.c (deallocate_inode): Set inode_link_info[ino] when |
| dellocating an inode. (Not strictly necessary, but...) |
| |
| * pass4.c (pass4): Add "bonehead" explanation to the "programming |
| error" message. |
| |
| Tue Aug 27 11:26:32 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (PRS,main): Added new options -s and -S. -s will |
| byte-swap the filesystem so that it is normalized. -S |
| will byte-swap the filesystem regardless of its current |
| byte-order. |
| |
| * swapfs.c: New file, which will byte-swap a filesystem. |
| |
| Tue Aug 20 09:41:37 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (pass1): Change handling on files with non-zero dtime |
| and non-zero i_link_count; before we treated them as |
| deleted file per botched ext2 0.3c kernel behavior. We |
| now clear dtime instead. |
| |
| Mon Aug 19 23:33:57 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (main): If e2fsck sets the clean bit, even if |
| nothing else is changed, make sure FSCK_NONDESTRUCT is |
| set (since after all having the filesystem set to |
| invalid is an error. :-) |
| |
| Fri Aug 9 10:25:13 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (process_block): Make sure that meta data doesn't get |
| accidentally set in the dir_blocks array (which could |
| happen in some error condtions). |
| |
| * pass1.c (pass1): |
| * pass2.c (process_bad_inode): Check for fragments in a |
| OS-independent fashion. |
| |
| Thu Aug 8 15:20:54 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (check_if_skip): Close the filesystem when skipping the |
| cleanup for the filesystem. |
| |
| Mon Jul 22 22:03:28 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c: Improve corrupt_msg, so that it's less confusing. |
| |
| Thu May 16 11:12:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.04 |
| |
| Wed May 15 21:41:29 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (relocate_hint): Issue a hint that the user may wish to |
| try "e2fsck -b 8193" before allowing e2fsck to relocate |
| inode table blocks. |
| |
| * Makefile.in (e2fsck): Build e2fsck statically or dynamically |
| depending on the option to configure. Added targets for |
| e2fsck.static and e2fsck.shared for people who want to |
| build a static or shared variant manually. |
| |
| Wed Mar 27 00:33:40 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.03 |
| |
| Tue Mar 26 12:03:42 1996 <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (show_stats): Don't use floating point to display |
| percentage of non-contiguous files, as different libc |
| handle result truncation differently, and this causes the |
| test suite to bomb out depending on which libc you are |
| using. |
| |
| * util.c (allocate_memory): Fix error message to omit extraneous |
| %%s. |
| |
| Tue Mar 5 03:50:40 1996 <tytso@rsts-11.mit.edu> |
| |
| * pass4.c (pass4): |
| * pass2.c (check_dir_block): |
| * pass1.c (pass1): Add support for dynamic first inode revision. |
| |
| Wed Feb 14 16:27:30 1996 <tytso@rsts-11.mit.edu> |
| |
| * pass3.c (check_root): Fix spelling typo |
| |
| Mon Feb 5 22:30:30 1996 <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (check_super_block): If the superblock fails certain |
| internal consistency checks, exit with a fatal error after |
| printing the "superblock is corrupt message". |
| |
| Wed Jan 31 11:06:08 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.02 |
| |
| Wed Dec 15 21:24:26 1996 <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (process_block): Check to see if a file is "fragmented". |
| i.e., non-contiguous. Note that any file which is larger |
| than the block group is guaranteed to be non-contiguous. |
| We may want to use a different hueristic for deciding |
| whether or not a file is "fragmented". |
| |
| * e2fsck.c (show_stats): Print statistics of how many |
| non-contiguous files are on the system. |
| |
| Fri Dec 15 19:19:47 1995 <tytso@rsts-11.mit.edu> |
| |
| * badblocks.c (read_bad_blocks_file, test_disk): Fold |
| functionality of test_disk() (which runs badblocks) into |
| read_bad_blocks_file(); test_disk() now calls |
| read_bad_blocks_file() with a NULL bad_blocks_file |
| argument. |
| |
| Mon Nov 20 18:30:10 1995 <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (check_mount): Use #if defined(__linux__) instead of |
| #if defined(linux). The latter won't work if we're |
| compiling -ansi. |
| |
| Mon Oct 30 20:31:17 1995 <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (check_mount): For Linux systems, the check to see if |
| the root is mounted read-only has to be done for all |
| filesystems, not just for the root filesystem, due to the |
| way that some /etc/rc scripts are set up. |
| |
| Thu Oct 26 12:05:30 1995 <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (install): Strip programs when they are installed. |
| (e2fsck): Build e2fsck statically. |
| |
| Wed Oct 25 21:18:16 1995 <tytso@rsts-11.mit.edu> |
| |
| * util.c (preenhalt): Preenhalt now takes an argument, which is an |
| ext2fs_filsys; this allows it to set the EXT2_ERROR_FS |
| flag in the superblock in cases where preenhalt is called. |
| All calls to preenhalt() were changed to either |
| preenhalt(fs) or preenhalt(NULL) in a few cases where the |
| fs pointer was not available. (Most notable, for block |
| read/write errors.) |
| |
| Mon Sep 4 21:41:03 1995 Remy Card <card@bbj> |
| |
| * ehandler.c: |
| util.c: Include <sys/time.h> before <sys/resource.h>. BSD needs it. |
| |
| Mon Sep 4 10:14:49 1995 <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (show_stats): Show statistics about how many inodes |
| have indirect, doubly indirect, and triply indirect |
| blocks. Allow up to 8 digits for statistics, instead of |
| merely 6, so things look pretty for large filesystems. |
| |
| * pass1.c (pass1): Keep statistics about indirect, doubly |
| indirect, and triply indirect blocks. |
| |
| * pass1.c (unwind_pass1): Clear the above statistics when unwinding |
| pass 1. |
| |
| Fri Aug 18 15:17:10 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * util.c, ehandler.c: Move #include of <sys/resource.h> after |
| #include of "e2fsck.h", since sys/resource.h may depend on |
| sys/time.h, which is #included in e2fsck.h. |
| |
| Thu Aug 17 22:33:37 1995 <tytso@rsts-11.mit.edu> |
| |
| * e2fsck.c (check_mount): Use the new ext2fs_check_if_mounted() |
| function to determine if the device is mounted. |
| |
| * e2fsck.c (main): Add better error messages if ext2fs_open() |
| fails. |
| |
| Wed Aug 16 16:25:02 1995 <tytso@rsts-11.mit.edu> |
| |
| * pass1.c (check_blocks): If we're clearing a directory, clear |
| pb.is_dir so we don't do the following check of making |
| sure the directory size matches; this is pointless, since |
| we've already cleared the inode. |
| |
| Fri Aug 11 09:08:54 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * pass1.c (bad_primary_block): New function, called by |
| process_bad_block, which explains the facts of life to the |
| user when a block in the primary superblock or primary |
| group descriptors is bad. |
| |
| * pass2.c (check_dot): Handle the case where the first directory |
| entry is used, but not ".". |
| |
| * pass2.c (check_dotdot): Handle the case where the second directory |
| entry is used, but is not "..". |
| |
| Thu Aug 10 10:05:10 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * e2fsck.c (check_super_block): Get the size of the physical |
| device and if it is smaller than the reported size of the |
| filesystem, report an error. |
| |
| Sat Aug 12 03:39:18 1995 Remy Card <card@bbj> |
| |
| * e2fsck.c (check_if_skip): Print the number of allocated files and |
| blocks on clean filesystems. |
| |
| Fri Aug 11 14:15:36 1995 Remy Card <card@bbj> |
| |
| * e2fsck.8: Updated date and version number. |
| |
| Thu Aug 10 14:26:01 1995 Remy Card <card@bbj> |
| |
| * pass1.c (check_blocks): Check that directory size matches *exactly* |
| the count of allocated blocks. |
| |
| Wed Aug 9 21:21:24 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * pass1b.c (pass1d): Free the shared[] array when we're done with |
| it to avoid a memory leak. |
| |
| * pass1.c (unwind_pass1): Use ext2fs_free_block_bitmap to free the |
| block_dup_map. |
| |
| * pass2.c (process_bad_inode): When clearing the inode, make sure |
| the pathname is freed, to prevent a memory leak. |
| |
| * pass5.c (check_inode_bitmaps): Free free_array and dir_array |
| when we're finished with them. |
| (check_block_bitmaps): Free free_array when we're finished |
| with them. |
| |
| * Makefile.in (e2fsck, flushb): Use $(LD) instead of $(CC) when |
| linking the executable. |
| |
| * pass2.c (process_bad_inode): Even on OS's that don't support the |
| fragment fields, make sure the Linux equivalent fields are |
| set to zero. If an OS wants to reuse these fields, which |
| is probably a bad idea (although we may get desperate in |
| the future) this code will have to be changed. |
| |
| * pass1.c (dir_block_cmp): If the block numbers are equal, compare |
| on the inode field, and then blockcnt field. This is just |
| to keep the ordering of dir_blocks the same on all |
| platforms when there are more than on missing directory |
| blocks, which are indicated directories with holes, which |
| are indicated with the block number being set to zero. |
| |
| Sun Aug 6 15:40:58 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * pass1.c (check_blocks, process_block): check_blocks() modified |
| to call the ext2fs_block_iterate() with BLOCK_FLAG_HOLE if |
| the inode is a directory. process_block() now checks to |
| see if a directory has a "hole", or missing block. If so, |
| this fact is recorded in the directory block list so that |
| the problem can be resolved in pass #2. |
| |
| * pass2.c (allocate_dir_block): Added allocate_dir_block() to |
| allocate new blocks for directories with "holes". Called |
| out of check_dir_block if a block in the directory block |
| list is zero. |
| |
| * pass3.c (get_lost_and_found): Move location of free(block) to |
| prevent possible memory leak. |
| |
| Sat Aug 5 12:42:22 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * pass2.c (check_dir_block): Use a automatic, fixed-saize array |
| instead of alloca() --- alloca is not portable! Check to |
| make sure the filename is not longer than EXT2_NAME_LEN, |
| and offer to fix it by truncating it, since it should |
| never happen. |
| |
| * e2fsck.c (PRS): Use malloc() instead of alloca() --- alloca() is |
| not portable!! In any case putenv() in some systems must |
| take a static character array or malloc()'ed memory; |
| passing memory allocated using alloca() to putenv() is not |
| advisable. |
| |
| * pass2.c (check_dot, check_dotdot): Use malloc() instead of |
| alloca() --- alloca() is not portable!!! |
| |
| Tue Jul 18 20:04:02 1995 <tytso@rsx-11.mit.edu> |
| |
| * pass1b.c (pass1c): |
| * pass3.c (check_root, get_lost_and_found): |
| * pass2.c (check_dir_block): Use ext2fs_{read,write}_dir_block |
| to read/write the directory block. |
| |
| Mon Jul 17 04:00:56 1995 <tytso@rsx-11.mit.edu> |
| |
| * util.c (ask_yn): Apply patch supplied by Peter A. Zaitcev to |
| make sure VMIN and VTIME are set correct. |
| |
| Fri Jul 14 19:26:29 1995 <tytso@rsx-11.mit.edu> |
| |
| * pass1.c (mark_block_used): Change to be an inline function. |
| Assume that the block validity checks are already done, |
| and use the fast variant of the bitmap functions. |
| |
| Thu Jul 13 08:10:55 1995 <tytso@rsx-11.mit.edu> |
| |
| * pass5.c (check_block_bitmaps, check_inode_bitmaps): Check the |
| bounds of the bitmaps in advance, and then use the fast |
| variant of e2fs_test_{block,inode}_bitmap. |
| |
| * pass1.c (mark_block_used): Use ext2_fast_mark_block_bitmap since |
| the bounds checking has already been done earlier. |
| |
| Wed Jul 12 02:22:46 1995 <tytso@rsx-11.mit.edu> |
| |
| * pass1.c (pass1): Allocate and free the block_illegal_map, which |
| is used for shortcut processing in process_block. |
| (mark_table_blocks): Initialize block_illegal_map with the |
| filesystem blocks. |
| (describe_illegal_block): New helper function that |
| describes why a block is illegal. |
| (process_block): Use block_illegal_map as a shortcut |
| to determine whether a block is bad. Use |
| describe_illegal_block to print out why the block is illegal. |
| |
| Mon Jun 12 19:11:06 1995 Theodore Y. Ts'o (tytso@dcl) |
| |
| * flushb.c: Don't include <linux/fs.h> if it doesn't exist. |
| |
| * scantest.c: Don't include <linux/fs.h>, <getopt.h>, or |
| <mntent.h> if they don't exist. (Mostly so that "make |
| depend" works.) |
| |
| * pass1.c, pass1b.c, pass3.c, badblocks.c: Include <errno.h> (if |
| it exists). |
| |
| * e2fsck.c, scantest.c: Don't include <getopt.h> if it doesn't |
| exist. |
| |
| Mon Jun 12 08:37:49 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * pass2.c (process_bad_inode, check_for_zero_long, |
| check_for_zero_char): Change long to u32, and char to u8. |
| |
| Sun Jun 11 15:05:57 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * util.c (inode_has_valid_blocks): |
| * pass2.c (process_bad_inode): |
| * pass1.c (pass1, check_blocks, pass1_check_directory): Use |
| LINUX_S_IS* instead of S_IS*. |
| |
| * e2fsck.h: Don't #include <sys/stat.h> |
| |
| * flushb.c (main): Add #ifdef BLKFLSBUF around ioctl. (Although |
| this program is pretty much useless if BLKFLSBUF isn't |
| supported.) |
| |
| * e2fsck.c, badblocks.c: Add #include <errno.h>, since errno is |
| used. |
| |
| Thu Jun 8 12:31:19 1995 Miles Bader <miles@churchy.gnu.ai.mit.edu> |
| |
| * pass2.c (check_dot, check_dotdot, check_dir_block): Use alloca |
| to allocate space for file names instead of using fixed size buffers. |
| (process_bad_inode): Only check inode frag fields if |
| HAVE_EXT2_FRAGS is defined (by configure). |
| * pass1.c (pass1): Only check the inode frag fields if |
| HAVE_EXT2_FRAGS is defined (by configure). |
| |
| * e2fsck.c (check_mount): Only check for a mounted filesystem if |
| HAVE_MNTENT_H is defined (by configure). |
| (PRS): Use alloca to allocate the new path string, instead of |
| having a fixed size buffer (which was the wrong size anyway). |
| (PRS): Only support the -F (flush) option if the BLKFLSBUF ioctl |
| is defined. |
| |
| * e2fsck.h: Only include <linux/fs.h> if HAVE_LINUX_FS_H is |
| defined (by configure). |
| |
| * Makefile.in: Rewritten to conform to GNU coding standards and |
| support separate compilation directories. |
| |
| Thu Apr 6 15:04:36 1995 Remy Card <card@bbj.ibp.fr> |
| |
| * pass1.c (pass1): Test the mode in reserved inodes (must be zero). |
| |
| Sat Mar 11 13:12:16 1995 Theodore Y. Ts'o <tytso@localhost> |
| |
| * pass1.c (unwind_pass1): Clear the file type statistics counter |
| when pass 1 needs to be restarted from scratch. |
| |
| * pass1.c (handle_fs_bad_blocks): Fix bug where bitmap blocks were |
| being reallocated to blocks in the next block group, |
| instead of the current block grup. |
| |
| * pass1.c (pass1, check_blocks): Set inode_link_info[ino] whenever |
| inode.i_links_count is set. |
| |
| Tue Feb 14 01:38:04 1995 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * pass1.c (process_block): Add checks for if the block is |
| trepassing on a superblock or group descriptor table. |
| |
| Sat Dec 31 00:52:11 1994 <tytso@rsx-11.mit.edu> |
| |
| * main.c (corrupt_msg): Extend the message which is printed out |
| when the superblock is corrupt, to include the suggestion |
| of using the -b option to specify an alternate superblock. |
| |
| Thu Nov 24 09:29:58 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * badblocks.c (read_bad_blocks_file): If we are adding or |
| replacing bad blocks in the bad blocks inode, sanity check |
| the bad block inode first, and clear out any illegal blocks. |
| |
| * pass2.c (check_name): Don't bomb out if the attempt to get the |
| pathname of the containing directory returns an error; the |
| directory may be too badly damaged to expect that |
| ext2fs_get_pathname will always succeed. Use "???" if the |
| pathname can't be obtained (it's only for a printf to the |
| user anyway). |
| |
| The name of the containing directory and the bad filename |
| were incorrectly interchanged in the user message. Fixed. |
| |
| * pass2.c (check_name, check_dir_block): Use a common static |
| string for the unknown pathname. |
| |
| Mon Nov 7 22:30:54 1994 Remy Card <card@bbj> |
| |
| * Fixed lots of printf formats to make sure that block and inode |
| numbers are printed as unsigned integers. |
| |
| Mon Oct 24 14:10:46 1994 (tytso@rsx-11) |
| |
| * pass5.c (check_block_end): Fix calculation of how the last block |
| in the block bitmap should be calculated. |
| |
| Wed Sep 7 10:01:13 1994 (tytso@rsx-11) |
| |
| * pass1b.c (pass1_dupblocks): Fix declaration of dup_inode_map to |
| be an ext2fs_inode_bitmap, and free it properly. |
| |
| * e2fsck.h |
| * e2fsck.c (main): Folded in Remy Card's changes to add a revision |
| level to the superblock. |
| |
| Wed Aug 17 22:00:20 1994 Remy Card (card@bbj) |
| |
| * e2fsck.c (usage): Fixed bogus usage message. |
| |
| Wed Aug 17 11:21:45 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * pass1.c (process_bad_block): Fixed bug so that blocks in the |
| backup superblocks and group descriptors are handled gracefully. |
| |