| 2000-10-24 <tytso@snap.thunk.org> |
| |
| * mke2fs.c (PRS, main), mke2fs.8.in: Add support for the -j |
| option, which builds an ext2/3 filesystem with an ext3 |
| journal. |
| |
| 2000-10-24 <tytso@valinux.com> |
| |
| * mke2fs.c (zap_sector): Fix really stupid typo which gcc 2.95 |
| didn't catch. |
| |
| 2000-09-12 <tytso@valinux.com> |
| |
| * fsck.c: Add base device definitions for hd[e-h], for those |
| systems with four IDE interfaces. |
| |
| 2000-09-11 <tytso@valinux.com> |
| |
| * mke2fs.c (zap_sector): Fix error message printed when zap_sector |
| fails. |
| |
| * dumpe2fs.c (list_desc): Fixed format string bug when printing |
| the inode table location in non-hex format. |
| |
| 2000-08-20 <tytso@valinux.com> |
| |
| * get_device_by_label.c: Add call to ext2fs_find_block_device if |
| we can't find the device using the name given by |
| /proc/partitions. (This can happen if devfs is compiled |
| into the kernel, but not mounted.) |
| |
| 2000-06-27 Andreas Dilger <adilger@turbolabs.com> |
| |
| * dumpe2fs.c (usage): add fhx options to usage message, add -x option |
| to print out the per-group block numbers in hex, add line for |
| location of primary/backup superblock and group descriptors |
| |
| * mke2fs.c: rename max to group_blk_max avoid potential macro conflict |
| |
| 2000-08-14 <tytso@valinux.com> |
| |
| * mke2fs.c (zap_sector): Change zap_bootsect to more general |
| zap_sect. |
| (main): Clear the superblock when starting mke2fs, to |
| avoid leaving the filesystem in an inconsistent state. |
| |
| 2000-07-26 <tytso@valinux.com> |
| |
| * get_device_by_label.c: Improve /proc/partitions parsing in |
| fsck, and speed up fsck -a. |
| |
| 2000-07-13 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.19 |
| |
| 2000-07-13 <tytso@snap.thunk.org> |
| |
| * badblocks.8.in: Added text explaining that the -n and -w options |
| are mutually exclusive. |
| |
| * badblocks.c (usage): Fix usage message to make it clear that the |
| block count must be specified if the starting block is to |
| be specified. (The starting block should be a option, in |
| the long run.) |
| |
| * badblocks.c (test_nd): Save and restore the currently_testing |
| variable before going into the write verification loop. |
| This avoids a loop termination problem if the last block |
| on the disk is bad. Also, turn off the SIGALRM signal |
| while restoring blocks after the user types ^C. The |
| num_saved variable is now static so that it won't get |
| clobbered by a longjmp. buf_used and bb_count are no |
| longer static, since they aren't used by the cleanup |
| routines anymore. |
| |
| * badblocks.c (main): Removed an unsued varaible (buf_size). |
| Fixed bad getopt argument that didn't allow the 'b' option |
| to take an argument. Added error checking when parsing |
| the starting block number. Fixed lint warning in fscanf |
| format string. |
| |
| 2000-07-06 Theodore Ts'o <tytso@valinux.com> |
| |
| * fsck.c (execute, wait_one): Treat fsck.ext3 the same as |
| fsck.ext2 (because they are the same) for the purposes of |
| the progress bar display logic. |
| |
| * tune2fs.8.in: Update manual page to document what happens if |
| max_mount_count is negative. |
| |
| * tune2fs.c (main): Allow setting the maximal count value to be |
| negative, since the kernel interprets that as forcing a |
| check. |
| |
| * fsck.c (lookup, load_fs_info, check_all): Use lazy evaluation |
| for calling interpret_device(), since this requires root |
| privileges if the partitions need to be scanned. |
| Otherwise, it's not possible to do non-proot fsck's for |
| removeable devices such as floppies if there are any |
| LABEL= or UUID= entries in /etc/fstab. |
| |
| * badblocks.c (check_mount, main): Check to see if the filesystem |
| is mounted before doing a read/write or non-destructive |
| test. This can be overriden using the new -f option. |
| |
| * badblocks.8.in: Update manual page to reflect that the |
| blocks-count parameter is now optional. Also properly |
| document the start-block parameter. Added documentation |
| for the -f option. |
| |
| * badblocks.c (main): Allow the blocks-count parameter to be |
| optional. If it's not specified, use the size of the |
| device as a default. |
| |
| 2000-07-05 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c (test_nd): Significantly simplify the logic so that |
| it's more obviously what's going on. Fixed a few |
| potential cases which weren't handled correctly in the |
| old, overly complicated logic. |
| (flush_bufs): Now doesn't take a second argument, and |
| always forces a sync; this is required before it's really |
| safe to call BLKFLSBUF, at least for some kernels. |
| |
| 2000-05-29 Theodore Ts'o <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): Add a much more specific error message if the |
| filesystem size is defaulted and get_device_size returns a |
| size of zero. Otherwise, users get a confusing "invalid |
| argument while passed to ext2 library" error message. |
| |
| 2000-05-08 Theodore Ts'o <tytso@valinux.com> |
| |
| * fsck.c (interpret_device): Add better error messages if a UUID= |
| or LABEL= specification is given. |
| |
| * mke2fs.c (main): We forcibly turn off the filetype feature if |
| the OS is the hurd, since the hurd doesn't support it. |
| (And since the hurd allows the transmogrification of files |
| to special files and vice versa --- for no good reason |
| that I can understand --- it can't support the filetype |
| feature for the forseeable future, either.) |
| |
| * mke2fs.c (proceed_question): Fix reversed sense of |
| proceed_question that was busted due to the |
| internationalization patch. Fixed bug where if |
| proceed_question was called twice, the input buffer wasn't |
| cleared of the previous question's newline. |
| |
| Thu Apr 6 17:50:25 2000 Theodore Y. Ts'o <tytso@signal.thunk.org> |
| |
| * badblocks.c (flush_bufs): Use fsync() if the system doesn't |
| support fdatasync(). |
| |
| 2000-04-03 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c, dumpe2fs.c, e2label.c, mke2fs.c, tune2fs.c, |
| uuidgen.c: For platforms that don't define optarg.h, |
| manually define optarg and optind. |
| |
| * badblocks.8.in: Updated manual page with suggestions from David |
| Beattie. |
| |
| * badblocks.c (test_nd): Generalized cleanup and bug-fixes. We |
| now explicitly clear out the signal handlers to prevent a |
| longjmp to a deactivated stack frame. |
| (test_rw): Fixed a signed vs. unsigned comparison error. |
| |
| * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, lsattr.1.in, |
| mklost+found.8.in, tune2fs.8.in: Update Remy Card's e-mail |
| address. |
| chattr.1.in: Update which attributes aren't supported. |
| |
| 2000-02-09 Theodore Ts'o <tytso@valinux.com> |
| |
| * chattr.1.in: |
| * lsattr.1.in: Change "version" to "version/generation number". |
| |
| * chattr.1.in: Fix stupid file vs filesystem typo. |
| |
| * tune2fs.c Fix spelling error (spare vs sparse). |
| |
| * mke2fs.c (PRS): Add safety check to make sure the number of |
| blocks doesn't exceed 32 bits on a 64 bit machine. |
| |
| * chattr.c: Random cleanup; file-only variables are now static. |
| Options for setting/clearings flags put into order, and |
| #ifdef's removed (since we now use a built-in header |
| file). Add error message if user tries to set and reset |
| the same flag. |
| |
| * lsattr.c: Random cleanup; file-only variables are now static. |
| The -l "long" listing has been changed to look nicer. |
| Options names have been renamed to be more descriptive. |
| |
| 2000-02-06 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, e2label.c, findsuper.c, |
| fsck.c, get_device_by_label.c, lsattr.c, mke2fs.c, |
| mklost+found.c, nls-enable.h, partinfo.c, tune2fs.c, |
| uuidgen.c: Add Internationalization support as |
| suggested by Marco d'Itri <md@linux.it>. |
| |
| * badblocks.c: Fix non-destructive read/write patches from David |
| Beattie. Non-standard variable-length automatic arrays |
| removed. Non-destrutive write test fixed so that logic is |
| clearer and more provably correct. (I believe the old |
| code had a bug where the disk data wasn't restored if it |
| was interrupted at the wrong time.) |
| |
| * badblocks.8.in: Document new options in man page. |
| |
| 2000-02-02 Theodore Ts'o <tytso@valinux.com> |
| |
| * fsck.c (interpret_device): If there was an attempt to interpret |
| a device specification of the type "UUID=" or "LABEL=", |
| and it fails, check to see if /proc/partitions is |
| readable. If not, print a warning message about /proc |
| perhaps not being mounted, and exit. |
| |
| * mke2fs.c (check_plausibility): Remove unneeded #include of |
| linux/fs.h. Add #define of MAJOR if necessary. |
| |
| * partinfo.c: Remove unneeded #include of linux/fs.h |
| |
| 2000-01-19 Theodore Ts'o <tytso@valinux.com> |
| |
| * tune2fs.c (usage): Update the usage message to correctly |
| document the -s option. |
| |
| 2000-01-18 Theodore Ts'o <tytso@valinux.com> |
| |
| * badblocks.c: Folded in patches David Beattie <dbeattie@usa.net>. |
| Need to do cleanup before release: use of GCC extensions |
| (dynamic arrays); unclean coding tricks (use of || instead |
| of if statements, etc.). Comments from David Beattie: |
| |
| "I added non-destructive write-testing, and quite a few |
| other features. The non-destructive write testing, |
| triggered by new "-n" command-line option, will write test |
| patterns to the disk, but only after reading data off the |
| disk into memory. Then, comparing the test patterns gives |
| a result as to whether or not those sectors are reliable. |
| Finally, the original data is written back. |
| |
| To streamline this operation, I added another option, "-c |
| blocks_at_once", which will give the number of disk blocks |
| to process at one time (mnemonic--"count"). I made this |
| default to 16 (as in the read-only testing mode), and also |
| affect the read-only testing mode. Of course, read-only |
| mode needs (count * block_size) amount of memory, and |
| non-destructive read-write needs 3 times that much, so it |
| makes sense to do the calculations and not overrun |
| available RAM...I would have liked to implement and |
| auto-memory-usage heuristic, but I have no idea if it's |
| even possible to determine the amount of free memory on a |
| Unix system except by reading /proc entries, and that |
| didn't seem portable. I did NOT make this blocks_at_once |
| affect the behavior of the test_rw routine, as it is |
| processing the whole disk at once, anyway. |
| |
| I *think* that I got higher detection rates on my hard |
| drive using random test data than patterned test data, so |
| my non-destructive mode initializes its test data buffer |
| randomly. |
| |
| I fixed a typo in flush_bufs that caused the ioctl |
| BLKFLSBUF to never get compiled into the program. |
| |
| Also, I added an "undocumented" (I didn't put it into the |
| usage message; you can if you think it's useful) "-h" |
| option to specify the host device to flush--useful if you |
| want to test out my "non-destructive" code on something |
| other than a hard drive, such as a file on a hard drive, |
| and want the host hard drive to flush. |
| |
| I provided support for an "input" file (via option "-i", |
| similar to the "-o" option)...containing a list of |
| already-known bad blocks; it will skip testing those |
| blocks, thus adding speed to the bad block scan (on my |
| computer, hitting a physically bad block causes a |
| half-second-or-more freeze as the kernel waits for the |
| hard drive to give up and reset itself; pretty annoying |
| when you already know the block is bad from a previous |
| scan). |
| |
| Finally, the real killer, the persistent re-scan (option: |
| "-p num_passes") that I created will, if desired, |
| persistently re-scan the drive until it has completed a |
| user-decidable number of passes in a row during which no |
| new bad blocks are found. On my drive, I would see |
| behavior that a certain percentage of bad blocks would be |
| found with each pass (it was not reliable in the defective |
| areas!), so I wanted it to check it over and over again |
| until it didn't find any more, several times. Perhaps |
| this will be useful to others. Defaults of course to |
| zero, meaning it will stop after the first pass. I used |
| "-p 2" on my drive, and it ran for 2 1/2 days...then used |
| "-p 3" a couple days later and it ran for a few more |
| hours, and since then the rest of my drive has been |
| completely reliable. |
| |
| Implementation of these last two features, "-i" and "-p", |
| I did using a bb_list from libext2fs. I debated whether |
| bad blocks input through "-i" should be output into the |
| "-o" file (or stdout, of course), and decided against it, |
| but left the code to do so in place, commented out, just |
| for your information. |
| |
| In order to maintain data integrity upon interruption of a |
| non-destructive-write test, I created a signal handler |
| which I install which will write back whatever original |
| disk data is in the buffers upon any of the fatal signals |
| (except SIGKILL, of course). |
| |
| Of course, ideally, the new options would be reflected in |
| the badblocks manual page, but I am not experienced at |
| manual page modification; if you decide my patch to |
| badblocks should be incorporated into the distribution, I |
| could learn how to update the manpage and other |
| documentation, or you could do it for me after exercising |
| your opinions, if you have any, on exactly what the |
| command-line parameters should be called and which ones |
| should be in the distribution." |
| |
| 2000-01-07 Theodore Ts'o <tytso@valinux.com> |
| |
| * Really fix the bug where "fsck -As" will actually allow |
| interactive fsck's. (For those people who like to do |
| interactive fsck's in the /etc/rc scripts!?!) |
| |
| 1999-11-23 <tytso@valinux.com> |
| |
| * tune2fs.8.in: Fix man page so that the sparse_super filesystem |
| option is properly named. |
| |
| 1999-11-22 <tytso@valinux.com> |
| |
| * mke2fs.c: Change log2() and log10() to int_log2() and |
| int_log10() to avoid namespace collisions. Change #ifdef |
| sparc to #ifdef __sparc__. |
| |
| 1999-11-19 <tytso@valinux.com> |
| |
| * Makefile.in (distclean): Remove TAGS and Makefile.in.old from |
| the source directory. |
| |
| 1999-11-10 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.18 |
| |
| 1999-11-10 <tytso@valinux.com> |
| |
| * mke2fs.8.in: Update manual page so that the sparse_option |
| filesystem option is properly named. |
| |
| 1999-11-04 <tytso@valinux.com> |
| |
| * fsck.c (main): Move setting of the interactive flag to before |
| the call to check_all(), so that people who try to use |
| fsck -As can do so interactively. |
| |
| 1999-10-26 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.17 |
| |
| 1999-10-26 <tytso@valinux.com> |
| |
| * fsck.c (PRS, device_already_active): Add debugging hook; if the |
| environment variable FSCK_FORCE_ALL_PARALLEL is set, then |
| force all fsck runs to happen in parallel. |
| |
| * get_device_by_label.c (has_right_label): Fixed bug where code |
| used a strncmp to compare a binary UUID value which may |
| contain a NULL. Fixed GCC warnings; added const to char * |
| typed variables. Eliminated non-portable use of u_char. |
| |
| * mke2fs.c (PRS): Fix gcc warnings; add const to some char * |
| variables, including in struct mke2fs_defaults. |
| (set_fs_defaults): Changed parameter name to avoid |
| gcc warnings. |
| |
| * fsck.c (wait_one): Fix gcc warnings; add #include for ctype.h, |
| add const to char * variables, and use NOARGS to declare |
| functions that take no arguments. Also fix a memory leak |
| in execute() where we weren't freeing argv[] after forking |
| the child process. |
| |
| * chattr.c: Add hack to compile in a definition for S_ISLNK so we |
| can successfully compile even with warnings turned on. |
| |
| 1999-10-25 <tytso@valinux.com> |
| |
| * mke2fs.c (show_stats): Capitalized Hurd to make the GNU types |
| happy. |
| (PRS): Use __u64 instead of long long for portability |
| reasons. Also moved #include of sys/stat.h inside #ifdef |
| HAVE_LINUX_MAJOR_H for portability reasons. |
| |
| * fsck.c (execute): Fix really stupid bug in the linked list |
| management which caused fsck in parallel mode to go into |
| an infinite loop. |
| |
| 1999-10-22 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.16 |
| |
| 1999-10-22 <tytso@valinux.com> |
| |
| * tune2fs.c (main): Add a new option -O which allows the user to |
| set and clear certain "safe" filsystem feature flags. |
| Currently, the only ones which are supported for |
| modification are sparse_superblock and filetype. |
| |
| * mke2fs.c (PRS): Add new option -O which allows the user to |
| request filesystems with specific filesystem options. By |
| default on 2.2 and later systems, create filesystems that |
| have both file type information and sparse superblocks. |
| |
| 1999-10-21 <tytso@valinux.com> |
| |
| * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, e2label.8.in, |
| fsck.8.in, lsattr.1.in, mke2fs.8.in, mklost+found.8.in, |
| tune2fs.8.in, uuidgen.1.in: Update man page to use a more standard |
| format (bold option flags and italicized variables), as |
| suggested by Andreas Dilger (adilger@enel.ucalgary.ca) |
| |
| 1999-10-14 <tytso@valinux.com> |
| |
| * tune2fs.c (main): Fix typo (double spaces) in messages regarding |
| changing the sparse superblock option |
| |
| * fsck.c (wait_one): If the fsck process just started, wait a |
| second before sending a SIGUSR1, to give it a chance |
| to set the signal handler; otherwise, fsck will die on an |
| unhandled SIGUSR1. |
| |
| 1999-09-15 <tytso@valinux.com> |
| |
| * mke2fs.c (show_stats): Fix display bug when printing out the |
| number of superblocks. Suggested by Yann Dirson. |
| |
| 1999-09-08 <tytso@valinux.com> |
| |
| * partinfo.c: Fix minor compilation bugs pointed out by Yann |
| Dirson. |
| |
| * mke2fs.c: Don't turn on sparse superblocks by default on pre-2.2 |
| kernels. |
| |
| * mke2fs.8.in: Add the possible valid block sizes for mke2fs. |
| Document the -n flag, and the new defaults for the -s |
| flag. |
| |
| * dumpe2fs.c, dumpe2fs.8.in: Add new options -f (force) and -h |
| (header-only). |
| |
| 1999-08-13 <tytso@valinux.com> |
| |
| * mke2fs.c (PRS): Fix logic for turning on/off the sparse |
| superblock option. |
| |
| 1999-07-18 Theodore Ts'o <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.15 |
| |
| 1999-07-18 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS, set_fs_defaults): Add new option -T which allows |
| the user to specify the how the filesystem is to be used. |
| Mke2fs now chooses the filesystem parameters automatically |
| based on the size of the filesystem and the intended use |
| of the filesystem. Add new option -n which simply goes |
| through the calculations to determine the parameters of |
| the filesystem the system would make. |
| |
| 1999-07-18 <tytso@valinux.com> |
| |
| * fsck.c, fsck.h: Add support for new option -C. This option will |
| automatically manage e2fsck processes so that they will |
| print completion/progress bars. If multiple filesystems |
| are being checked, arrange to make sure that only one |
| e2fsck process is displaying a progress bar at a time. |
| |
| 1999-07-08 <tytso@valinux.com> |
| |
| * badblocks.c (do_test): Don't complain if the write error occurs |
| on a non-block boundary. This is perfectly common when |
| using blocksizes larger than 1k. |
| |
| 1999-07-03 <tytso@valinux.com> |
| |
| * uuidgen.c: Add option parsing so that user can ask for either a |
| time-based UUID or a random-based UUID. |
| |
| 1999-07-02 <tytso@valinux.com> |
| |
| * fsck.c: Added support for LABEL= and UUID= specifications for |
| the filesystem's device, to match what recent mount |
| programs can support. Also, close stdin when doing fsck |
| -A or when checking more than one filesystem at a time, so |
| that e2fsck doesn't try to ask interactive questions if |
| the filesystem appears to be mounted. |
| |
| * get_device_by_label.c: New file added to support LABEL=foo and |
| UUID=bar type specifications. |
| |
| 1999-07-01 <tytso@valinux.com> |
| |
| * badblocks.c: Make the "done" string include enough spaces to |
| clear out a large block number. |
| |
| 1999-06-29 <tytso@valinux.com> |
| |
| * mke2fs.c (check_mount): Allow a filesystem to be made even if it |
| appears mounted if the force option is given. |
| |
| 1999-06-24 <tytso@valinux.com> |
| |
| * mke2fs.8.in: Fix typo in man page which caused the badblocks |
| command to not show up in the "SEE ALSO" section. |
| |
| 1999-05-02 <tytso@rsts-11.mit.edu> |
| |
| * findsuper.c: Added documentation from aeb@cwi.nl; some minor |
| code cleanups. |
| |
| 1999-05-20 <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c, dumpe2fs.8.in: Added new command-line options which |
| allow a filesystem expert to specify the superblock and |
| blocksize when opening a filesystem. This is mainly |
| useful when examining the remains of a toasted filesystem. |
| |
| 1999-03-11 Andreas Dilger <adilger@enel.ucalgary.ca> |
| |
| * uuidgen.c, uuidgen.1.in: Created command-line utility to |
| generate UUIDs. |
| |
| 1999-03-14 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (fsck_device, execute): Don't dereference a null pointer |
| when checking a filesystem not in /etc/fstab. |
| |
| 1999-02-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (fsck_device): Print an error message if the user passes |
| in a device or directory name which isn't found in /etc/fstab. |
| Allow the location of /etc/fstab to be overridden by |
| the FSTAB_FILE environment variable. |
| |
| 1999-01-30 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (write_inode_tables): Add kludge code so that when the |
| MKE2FS_SYNC environment variable is set, mke2fs will sync |
| every MKE2FS_SYNC block groups, while it is writing out |
| the inode tables. This is to work around a VM bug in the |
| 2.0 kernel. I've heard a report that a RAID user was able |
| to trigger it even using a 2.2 kernel. |
| |
| 1999-01-16 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (execute, wait_one): Modified routines so that they |
| accurately create an fsck_instance even when the noexecute |
| flag is set. This allows for accurate debugging of the |
| fsck pass structure. |
| (check_all): When the verbose flag is given twice, print |
| debugging information about when fsck is waiting for jobs |
| to finish. |
| |
| 1999-01-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.14 |
| |
| 1999-01-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.8.in: Clarified and expanded the documentation for the -A |
| switch. |
| |
| 1999-01-07 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (load_fs_info): If the pass number field is missing, it |
| needs to be treated as zero. |
| |
| 1999-01-05 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS): Allow the user to specify exactly how many |
| inodes he/she wishes. |
| |
| * chattr.c, lsattr.c: Only print the version information for the |
| program if the -V option is given. |
| |
| * chattr.c: Ignore symbolic links when doing a recursive descent |
| through a directory. |
| |
| 1999-01-01 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (load_fs_info, parse_fstab_line): Ignore fstab lines |
| are commented out. Also allow blank lines in the |
| /etc/fstab file. |
| (execute): In verbose mode, print the mountpount of the |
| filesystem which we are checking (user request). |
| |
| 1998-12-30 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c: Add definition of SCSI_BLK_MAJOR if not defined, for |
| compatibility with Linux 1.2.13 header files. |
| |
| 1998-12-15 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.13 |
| |
| 1998-12-07 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.8.in: Fixed stupid typo ("Raid options are _comma_ |
| seperated", instead of common separated) |
| |
| 1998-12-03 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Updated dependencies. |
| |
| 1998-11-27 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of |
| relying on getmntent(). This has the advantage of |
| allowing us to properly handle missing pass numbers correctly. |
| |
| 1998-11-13 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.8.in: Fix minor display bug in the nroff. |
| |
| * mke2fs.c (show_stats, write_inode_tables): Use the log10 |
| function to calculate the display of block numbers so that |
| things look nice on an 80 character display. |
| |
| 1998-10-12 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (usage): Add the sparse-super-flag to the usage |
| message. |
| |
| 1998-07-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.12 |
| |
| 1998-07-04 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * findsuper.c (main): Print the block group number which is now |
| being written by e2fsprogs. |
| |
| 1998-06-25 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (ignore): Remove unused variable cp. |
| |
| * chattr.c (fatal_error): |
| * tune2fs.c (usage): |
| * lsattr.c (usage): |
| * dumpe2fs.c (usage): |
| * badblocks.c (usage): Remove volatile from declaration. |
| |
| * fsck.c: Change use of strdup to be string_copy, since we don't |
| trust what glibc is doing with strdup. (Whatever it is, |
| it isn't pretty.) |
| |
| 1998-06-19 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS): Add a -V option which prints the version number |
| and exit. |
| |
| 1998-05-14 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (ignore): Remove check for filesystems with the noauto |
| option. |
| |
| 1998-03-30 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Change to use new installation directory variables |
| convention. Fix uninstall rules to take $(DESTDIR) into |
| account. Remove cat8dir and cat1dir from the installdirs |
| target, since modern man package don't necessarily put the |
| cat directory in /usr/man/cat?. |
| |
| 1998-03-29 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * e2label.8.in: New man page to document the e2label function. |
| |
| * e2label.c: Fix -Wall warning by making functions static. |
| |
| 1998-03-28 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Document that the append-only attribute may |
| only be set or cleared by the superuser. |
| |
| * Update all manual pages to that the availability section is |
| up-to-date. |
| |
| * e2label.8.in, tune2fs.8.in: Update manual page to state that |
| labels must be no longer than 16 characters, or they will |
| be truncated. |
| |
| * e2label.c (change_label), tune2fs.c (main): If the label is |
| longer than 16 characters, print a warning message stating |
| that the label will be truncated. |
| |
| * mke2fs.c (PRS): If the user specifies a filesystem size, and |
| it's larger than the apparent size of the device, print a |
| warning message and ask if the user wants to proceed. |
| |
| 1998-03-21 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Fixed spelling typo in warning |
| message. Fixed up -Wall warnings in file. |
| |
| Sun Mar 8 22:21:48 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * partinfo.c (main): The ioctl BLKGETSIZE requires a long, not an |
| int. |
| |
| Sun Feb 1 16:53:36 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.8: Update documentation to note that output format |
| of badblocks is suitable for use with e2fsck -l or |
| mke2fs -l. |
| |
| * mke2fs.c (handle_bad_blocks): Fix bug so that all groups with |
| bad superblock backup blocks are printed (not just the |
| first one). |
| |
| Mon Dec 1 17:01:04 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.8.in: Add documentation for the -s option. |
| |
| Fri Oct 24 23:37:52 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c: |
| * chattr.c: Remove #include of getopt.h, since it's not needed. |
| |
| * tune2fs.c (main): |
| * lsattr.c (main): |
| * badblocks.c (main): |
| * dumpe2fs.c (main): |
| * mke2fs.c (PRS): Make the variable which getopt returns into be |
| an int, so that it won't lose on platforms where char is |
| unsigned. |
| |
| Fri Oct 3 13:38:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (parse_raid_opts): Make parse_raid_opts return a void, |
| to fix a -Wall warning. |
| |
| Mon Sep 15 22:07:12 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): |
| * mklost+found.c (main): |
| * lsattr.c (main): |
| * dumpe2fs.c (main): |
| * chattr.c (main): |
| * badblocks.c (main): Declare main to return an int, as required. |
| Make sure main always ends with an exit(0). (Some |
| programs weren't doing this, and thus were returning a |
| random exit value.) |
| |
| Mon Jul 14 15:27:29 1997 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * e2label.c: New file contributed by Andries Brouwer which |
| provides an easy-to-use interface to modify the filesystem |
| label. |
| |
| * Makefile.in (SPROGS): Add Makefile support to build e2label |
| |
| Tue Jun 17 01:33:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.11 |
| |
| Mon Jun 16 23:37:54 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (show_stats): Adjust the number of columns printed when |
| displaying the superblock backups to avoid running over |
| 80 columns when making a really big disk. |
| |
| Thu May 8 22:22:08 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, fsck.8.in, |
| mke2fs.8.in, tune2fs.8.in: Fix minor typos and grammer |
| oops found by Bill Hawes (whawes@star.net). |
| |
| * mke2fs.c (test_disk): Pass the blocksize to the bad blocks |
| command so that all of the filesystem gets tested in the |
| case where the blocksize 2048 or 4096. |
| |
| Thu Apr 24 12:16:42 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * Release of E2fsprogs version 1.10 |
| |
| Thu Apr 24 09:52:47 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * mke2fs.c: Added new option -R, which specifies RAID options. |
| Currently the only supported RAID option is "stride" which |
| specifies the stripe width in RAID filesystem. This is |
| used to aid in the placement of the inode and block |
| bitmaps. |
| |
| * mke2fs.8.in, tune2fs.8.in: Added warnings that the sparse |
| superblock option isn't yet supported by most kernels. |
| |
| Wed Apr 23 22:42:51 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * mke2fs.c (PRS): Make the default filesystem revision be 0, not |
| 1. (Since some people are still worried about 1.2.13 |
| compatibility). |
| |
| Thu Apr 17 12:23:38 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.09 |
| |
| Fri Apr 11 18:57:24 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Updated man page so that the 'A' attribute is |
| specified everywhere. |
| |
| * chattr.c (usage): Added usage message for the 'A' attribute. |
| |
| Fri Apr 11 18:56:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.08 |
| |
| Thu Apr 10 07:08:03 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c (list_desc): List the offsets of the inode and block |
| bitmaps, and the inode table. List the block boundaries |
| for the groups. |
| |
| Sat Apr 5 11:55:52 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): Implement the -s flag allows the user to |
| set and reset the sparse superblock flag. |
| |
| * mke2fs.c (PRS): By default generate DYNAMIC revision |
| filesystems. The -s flag controls whether or not the |
| sparse superblock flag is set. |
| (PRS): Change to allow the user to specify the true |
| maximum number of blocks per group to reflect the |
| blocksize. |
| |
| Wed Mar 12 13:32:05 1997 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs version 1.07 |
| |
| Thu Mar 6 17:15:05 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (create_root_dir): Set the root directory's i_uid and |
| i_gid to be the real user and group id. |
| |
| Tue Mar 4 10:14:33 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Add more intelligent error |
| messages when the device doesn't exist. |
| |
| Sat Mar 1 10:43:32 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (main): Fix bug where the PATH environment variable isn't |
| set when it is unset. |
| |
| Tue Jan 14 12:30:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (write_inode_tables): Fixed bug in write_inode_tables |
| where a loop variable was getting reused in a nested loop. |
| This caused the inode table to not be correctly |
| initialized. |
| |
| Thu Jan 2 00:00:37 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * lsattr.c, chattr.c: Include string.h, since we use memcpy(). |
| |
| * findsuper.c: Use time_t for ctime(), not __u32. |
| |
| Sat Dec 28 23:39:18 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.c: Adapted -vv modifications from Rik Faith so that |
| they frequently update the block number field. |
| |
| * badblocks.8.in: Document the optional start-block parameter |
| |
| Mon Oct 14 11:52:58 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c: Updated to use new ext2fs_allocate_tables() function. |
| |
| Tue Oct 8 02:02:03 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.06 |
| |
| Mon Oct 7 00:56:24 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Documented the 'A' (noatime) attribute. |
| |
| * dumpe2fs.c (main): Change EXT2_SWAP to EXT2_FLAG_SWAP for |
| consistency's sake. |
| |
| Sun Sep 22 16:18:47 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.c (decode_arg): Add support for the 'A' (noatime) flag. |
| |
| Thu Sep 12 15:23:07 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.05 |
| |
| Sat Sep 7 07:34:11 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): Add support for new option -C, which sets the |
| current number of mounts. |
| (main): Allow the interval to be specified in seconds, |
| mostly for debugging. |
| |
| Tue Aug 27 17:27:43 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * Makefile.in (SMANPAGES): Use @FSCK_MAN@ instead of fsck.8. |
| (SPROGS): Use @FSCK_PROG@ instead of fsck. |
| |
| Thu Aug 22 00:51:44 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (zap_bootblock): Don't do zap_bootblock on a |
| sparc. |
| |
| Tue Aug 20 00:15:46 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.c (main): Fixed bug so that chattr -v works. (Bug report |
| and fix sent by Charles Howes, chowes@eznet.ca) |
| |
| Fri Aug 9 11:52:42 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.8.in: |
| * tune2fs.c: Added support for the -L option which sets the volume |
| label, the -M option which sets the last mounted |
| directory, and the -U option which sets the filesystem UUID. |
| |
| * mke2fs.8.in: |
| * mke2fs.c: Added support for the -o option, which overrides the |
| creator OS. Generate a UUID for the filesystem, if |
| applicable. Added support for the -L option which sets |
| the volume label, and the -M option which sets the last |
| mounted directory. |
| |
| Sat Jun 22 17:43:17 1996 Remy Card <card@bbj.linux.eu.org> |
| |
| * chattr.c (decode_arg): Integrated Michael Nonweiler's fix to |
| avoid a segmentation fault when the "-v" option is used |
| and no version number is specified. |
| |
| Thu May 16 11:12:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.04 |
| |
| Wed May 15 21:15:43 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (fsck): fsck doesn't need to be linked with the ext2 |
| libraries. |
| |
| Wed Mar 27 00:33:40 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.03 |
| |
| Thu Mar 7 03:43:20 1996 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS): Add (for development only) support to |
| specify revision and inode size of the new filesystem. |
| |
| Tue Mar 5 03:51:35 1996 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.8.in: Fix a few minor typo's in the man page. |
| |
| * mke2fs.c (reserve_inodes): Add support for dynamic first inode |
| revision. |
| |
| Mon Feb 5 22:19:49 1996 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (check_all, PRS): Added new flag -P, which turns on the |
| parallel root option. This allows you to check the root |
| filesystem in parallel with the other filesystems. Note |
| that this is not the safest thing in the world to do, |
| since if the root filesystem is in doubt things like |
| the e2fsck executable might be corrupted! But some |
| sysadmins, who don't want to repartition the root |
| filesystem to be small and compact, may really want this |
| option turned on. |
| |
| Wed Jan 31 11:06:08 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.02 |
| |
| Tue Oct 30 21:14:12 1995 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Add check to warn user if they |
| are trying to mke2fs the whole disk. (/dev/hda |
| vs. /dev/hda1) |
| |
| Fri Dec 15 19:09:56 1995 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (check_all): If we break out of the loop because we are |
| serializing and have just started at fsck we haven't |
| finished the pass. We need to go round again in case there |
| are more filesystems to be done in this pass. (Patch |
| submitted by Mike Jagdis) |
| |
| Sat Dec 9 10:07:16 1995 <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c (in_use): test_bit() was renamed to |
| ext2fs_test_bit(). |
| |
| Mon Oct 30 20:21:18 1995 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (fsck_device): Check fstype instead of type; this was a |
| stupid typo which caused coredumps in some cases. |
| |
| Thu Oct 26 12:05:18 1995 <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (install): Strip programs when they are installed. |
| |
| Fri Aug 18 15:10:40 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * mke2fs.c (PRS): Move call of check_mount() from main() to PRS(), |
| so we do the check to see if the filesystem is mounted |
| *before* we try to determine the size of the device. |
| |
| Wed Sep 6 23:34:07 1995 Remy Card <card@bbj> |
| |
| * fsck.c (load_fs_info): Load the informations from /etc/fstab in |
| the same order. |
| |
| Thu Aug 17 22:33:09 1995 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_mount): Use the new ext2fs_check_if_mounted() |
| function to determine if the device is mounted. |
| |
| * mke2fs.c (PRS): Change call to use the new |
| ext2fs_get_device_size() function in order to determine |
| the size of the filesystem. Remove get_size() and |
| is_valid_offset(), which are no longer called. |
| |
| Fri Aug 11 08:26:24 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * fsck.c (fsck_device): Make sure fstype has been set by the user |
| and that it does not begin with "no" and the user has |
| specified exactly one type before using it as the type to |
| check. |
| |
| Fri Aug 11 14:17:18 1995 Remy Card <card@bbj> |
| |
| * badblocks.8: |
| * chattr.1: |
| * dumpe2fs.8: |
| * fsck.8: |
| * lsattr.1: |
| * mke2fs.8: |
| * mklost+found.8: |
| * tune2fs.8: Updated date and version number. |
| |
| Thu Aug 10 14:18:36 1995 Remy Card <card@bbj> |
| |
| * tune2fs.c: Fixed a bug which prevented the use of user and group |
| names with the -g and -u options. Thanks to Jean Christophe |
| ANDRE <progfou@mycrob.cafard.freenix.fr>. |
| |
| * mke2fs.8: |
| * tune2fs.8: Fixed a spelling error in Ted's name :-) |
| |
| Wed Aug 9 20:41:54 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * mke2fs.c (count_blocks): Divide the size by |
| EXT2_BLOCK_SIZE(¶m), instead of assuming that the |
| blocksize is always 1024 bytes. |
| |
| Sat Aug 5 12:00:51 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * mke2fs.c (PRS): Use malloc() instead of alloca() --- alloca() is |
| not portable!! In any case putenv() in some systems must |
| take a static character array or malloc()'ed memory; |
| passing memory allocated using alloca() to putenv() is not |
| advisable. |
| |
| * chattr.c (chattr_dir_proc): |
| * lsattr.c (lsattr_dir_proc): Use malloc() instead of alloca() --- |
| alloca is not portable! |
| |
| * fsck.c (fsck_device): If the filesystem type is specified by the |
| user using the -t option, let it override the type in |
| /etc/fstab. |
| |
| * fsck.c (strdup): Don't build strdup() if the system defines it. |
| |
| Mon Jun 12 19:15:10 1995 Theodore Y. Ts'o (tytso@dcl) |
| |
| * chattr.c, lsattr.c: Include <sys/types.h> for <dirent.h>'s |
| benefit. |
| |
| * The $(UPROGS) go in bin, not sbin. |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c, |
| tune2fs.c: Don't include <getopt.h> if it doesn't exist. |
| |
| Mon Jun 12 16:36:04 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c, |
| tune2fs.c: Only include getopt.h if HAVE_GETOPT_H is defined. |
| |
| Sat Jun 10 23:37:09 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * chattr.c: Include errno.h, since we use errno |
| |
| * fsck.c (load_fs_info): If HAVE_MNTENT_H is not defined, |
| explicitly initialize filesys_info to be NULL. |
| |
| * mke2fs.c: Include the stdio.h and errno.h header files |
| |
| Thu Jun 8 13:25:23 1995 Miles Bader <miles@churchy.gnu.ai.mit.edu> |
| |
| * mke2fs.c: Only include <linux/fs.h> if we can. |
| (get_size): Don't try to use the BLKGETSIZE ioctl unless it's defined. |
| (check_mount): Only check to see if the device is mounted if |
| HAVE_MNTENT_H is defined (by configure). |
| |
| * fsck.c (load_fs_info): Only try to get info about filesystems if |
| HAVE_MNTENT_H is defined (by configure). |
| (main): Allocate space for a new fsck_path instead of append to a |
| statically sized buffer. |
| (PRS): Use alloca to allocate the new path string, instead of |
| having a fixed size buffer (which was the wrong size anyway). |
| |
| * chattr.c (chattr_dir_proc): Use alloca to allocate space for a |
| filename instead of using a fixed-size buffer. |
| * lsattr.c (lsattr_dir_proc): Ditto. |
| * mklost+fond.c (main): Calculate the actual needed size for the |
| path buffer instead of using MAXPATHLEN (which not all systems have). |
| |
| * badblocks.c: Only include linux include files if we have them. |
| (flush_bufs): New function to flush a block device, optionally |
| syncing it first. This replaces other copies of this code. |
| (test_ro): Replace calls to ioctl with flush_bufs(). |
| (test_rw): Ditto. |
| |
| * Makefile.in: Rewritten to conform to GNU coding standards and |
| support separate compilation directories. |
| |
| Sat Mar 11 10:59:58 1995 Theodore Y. Ts'o <tytso@localhost> |
| |
| * mke2fs.c (main, zap_bootblock): Added new function |
| zap_bootblock() which clears the first 512 bytes of the |
| filesystem. This protects the filesystem from being |
| misidentified as a MS-DOS FAT filesystem. |
| |
| * badblocks.c (alarm_intr, test_ro, test_rw): Increase the space |
| allocated for printing the block numbers, so that the |
| display doesn't get corrupted when running badblocks on a |
| very large partition. |
| |
| * badblocks.c (do_test, test_ro, test_rw): Added missing cast to |
| ext2_loff_t, so that when checking a large device, |
| spurious seek errors aren't reported. |
| |
| * mke2fs.c (count_blocks): Declare mid to be of type ext2_loff_t |
| instead of type int, so that it works for filesystems |
| greater than 2 GB. (Fortunately count_blocks is only |
| called if the device does not support the BLKGETSIZE |
| ioctl, which most do.) |
| |
| * fsck.c (ignore): Add check to ignore filesystems with a pass |
| number of zero. (This check was accidentally deleted at |
| during 0.5b development.) |
| |
| Sat Dec 31 00:47:16 1994 <tytso@rsx-11.mit.edu> |
| |
| * mke2fs.c (new_table_block, alloc_tables, PRS, main): Add a new |
| option, -S, which only writes the superblock and group |
| descriptors. Useful for recovering when all of the |
| superblocks are corrupted somehow (as a last ditch |
| measure). |
| |
| Also, don't bother initializing the bitmap blocks in |
| alloc_tables(), since they will be overwritten at the end |
| anyway. (Should speed up mke2fs by a little.) |
| |
| Tue Dec 6 02:20:55 1994 <tytso@rsx-11.mit.edu> |
| |
| * fsck.c (main): Fix stupid typo where a null inst would be freed. |
| |
| * fsck.c (wait_one): Check WIFEXITED on status before trying to |
| extract the exit status. In other cases, return |
| FSCK_ERROR if the back end processor exited with a signal. |
| |
| Tue Nov 15 10:20:00 1994 Remy Card <card@bbj> |
| |
| * tune2fs.c (main): Fixed a bug which prevented the use of the |
| new options. |
| Added the `w' (week) suffix recognition in the check interval. |
| |
| Sun Nov 13 15:58:48 1994 (tytso@rsx-11) |
| |
| * fsck.c (load_fs_info): If the user has an obviously old |
| /etc/fstab file, issue a warning message and assume that |
| all partitions should be checked. |
| |
| Sat Nov 12 00:33:18 1994 (tytso@rsx-11) |
| |
| * dumpe2fs.c (list_desc): Update to new inode and block bitmap |
| structures. |
| |
| * mke2fs.c (create_root_dir): Create the root directory owned by |
| the effective uid. |
| |
| Mon Nov 7 22:04:37 1994 Remy Card <card@bbj> |
| |
| * tune2fs.c (main.c): Added support for new options: |
| -r reserved_blocks_count, -g reserved_gid, -u reserved_uid. |
| |
| Sun Aug 21 00:57:33 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * fsck.c (ignore): If the pass number is 0, ignore the filesystem. |
| |
| Wed Aug 17 21:55:03 1994 Remy Card (card@bbj) |
| |
| * badblocks.c (test_rw): Added verbose output like in the |
| read-only test. |
| |
| (do_test and test_rw): Use the llseek system call if available. |
| |
| * chattr.c: Added support for new attributes. |
| |
| * lsattr.c: Added support for long format. |
| |
| * mke2fs.c (usage): Fixed bogus usage message. |
| |
| (valid_offset): Use the llseek system call if available. |
| |
| Wed Aug 17 10:50:57 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * mke2fs.c (handle_bad_blocks): Check to see if a bad block is |
| where a backup superblock/group descriptor is stored. If so, |
| print a warning message and adjust the superblock counts so that |
| they are correct. (Otherwise, the bad block will get counted |
| twice and the # of free blocks count will be wrong.) |
| |
| (alloc_tables): Removed code which calcualated the free block |
| statistics, which was moved to lib/ext2fs/initialize.c. This |
| allows the bad block code to adjust the group descriptor |
| statistics if necessary. |