| /* |
| * pass3.c -- pass #3 of e2fsck: Check for directory connectivity |
| * |
| * Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999 Theodore Ts'o. |
| * |
| * %Begin-Header% |
| * This file may be redistributed under the terms of the GNU Public |
| * License. |
| * %End-Header% |
| * |
| * Pass #3 assures that all directories are connected to the |
| * filesystem tree, using the following algorithm: |
| * |
| * First, the root directory is checked to make sure it exists; if |
| * not, e2fsck will offer to create a new one. It is then marked as |
| * "done". |
| * |
| * Then, pass3 interates over all directory inodes; for each directory |
| * it attempts to trace up the filesystem tree, using dirinfo.parent |
| * until it reaches a directory which has been marked "done". If it |
| * can not do so, then the directory must be disconnected, and e2fsck |
| * will offer to reconnect it to /lost+found. While it is chasing |
| * parent pointers up the filesystem tree, if pass3 sees a directory |
| * twice, then it has detected a filesystem loop, and it will again |
| * offer to reconnect the directory to /lost+found in to break the |
| * filesystem loop. |
| * |
| * Pass 3 also contains the subroutine, e2fsck_reconnect_file() to |
| * reconnect inodes to /lost+found; this subroutine is also used by |
| * pass 4. e2fsck_reconnect_file() calls get_lost_and_found(), which |
| * is responsible for creating /lost+found if it does not exist. |
| * |
| * Pass 3 frees the following data structures: |
| * - The dirinfo directory information cache. |
| */ |
| |
| #ifdef HAVE_ERRNO_H |
| #include <errno.h> |
| #endif |
| |
| #include "e2fsck.h" |
| #include "problem.h" |
| |
| static void check_root(e2fsck_t ctx); |
| static int check_directory(e2fsck_t ctx, ext2_ino_t ino, |
| struct problem_context *pctx); |
| static void fix_dotdot(e2fsck_t ctx, ext2_ino_t ino, ext2_ino_t parent); |
| |
| static ext2fs_inode_bitmap inode_loop_detect = 0; |
| static ext2fs_inode_bitmap inode_done_map = 0; |
| |
| void e2fsck_pass3(e2fsck_t ctx) |
| { |
| ext2_filsys fs = ctx->fs; |
| struct dir_info_iter *iter; |
| #ifdef RESOURCE_TRACK |
| struct resource_track rtrack; |
| #endif |
| struct problem_context pctx; |
| struct dir_info *dir; |
| unsigned long maxdirs, count; |
| |
| #ifdef RESOURCE_TRACK |
| init_resource_track(&rtrack, ctx->fs->io); |
| #endif |
| |
| clear_problem_context(&pctx); |
| |
| #ifdef MTRACE |
| mtrace_print("Pass 3"); |
| #endif |
| |
| if (!(ctx->options & E2F_OPT_PREEN)) |
| fix_problem(ctx, PR_3_PASS_HEADER, &pctx); |
| |
| /* |
| * Allocate some bitmaps to do loop detection. |
| */ |
| pctx.errcode = ext2fs_allocate_inode_bitmap(fs, _("inode done bitmap"), |
| &inode_done_map); |
| if (pctx.errcode) { |
| pctx.num = 2; |
| fix_problem(ctx, PR_3_ALLOCATE_IBITMAP_ERROR, &pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| goto abort_exit; |
| } |
| #ifdef RESOURCE_TRACK |
| if (ctx->options & E2F_OPT_TIME) { |
| e2fsck_clear_progbar(ctx); |
| print_resource_track(_("Peak memory"), &ctx->global_rtrack, |
| NULL); |
| } |
| #endif |
| |
| check_root(ctx); |
| if (ctx->flags & E2F_FLAG_SIGNAL_MASK) |
| goto abort_exit; |
| |
| ext2fs_mark_inode_bitmap(inode_done_map, EXT2_ROOT_INO); |
| |
| maxdirs = e2fsck_get_num_dirinfo(ctx); |
| count = 1; |
| |
| if (ctx->progress) |
| if ((ctx->progress)(ctx, 3, 0, maxdirs)) |
| goto abort_exit; |
| |
| iter = e2fsck_dir_info_iter_begin(ctx); |
| while ((dir = e2fsck_dir_info_iter(ctx, iter)) != 0) { |
| if (ctx->flags & E2F_FLAG_SIGNAL_MASK) |
| goto abort_exit; |
| if (ctx->progress && (ctx->progress)(ctx, 3, count++, maxdirs)) |
| goto abort_exit; |
| if (ext2fs_test_inode_bitmap(ctx->inode_dir_map, dir->ino)) |
| if (check_directory(ctx, dir->ino, &pctx)) |
| goto abort_exit; |
| } |
| e2fsck_dir_info_iter_end(ctx, iter); |
| |
| /* |
| * Force the creation of /lost+found if not present |
| */ |
| if ((ctx->flags & E2F_OPT_READONLY) == 0) |
| e2fsck_get_lost_and_found(ctx, 1); |
| |
| /* |
| * If there are any directories that need to be indexed or |
| * optimized, do it here. |
| */ |
| e2fsck_rehash_directories(ctx); |
| |
| abort_exit: |
| e2fsck_free_dir_info(ctx); |
| if (inode_loop_detect) { |
| ext2fs_free_inode_bitmap(inode_loop_detect); |
| inode_loop_detect = 0; |
| } |
| if (inode_done_map) { |
| ext2fs_free_inode_bitmap(inode_done_map); |
| inode_done_map = 0; |
| } |
| |
| #ifdef RESOURCE_TRACK |
| if (ctx->options & E2F_OPT_TIME2) { |
| e2fsck_clear_progbar(ctx); |
| print_resource_track(_("Pass 3"), &rtrack, ctx->fs->io); |
| } |
| #endif |
| } |
| |
| /* |
| * This makes sure the root inode is present; if not, we ask if the |
| * user wants us to create it. Not creating it is a fatal error. |
| */ |
| static void check_root(e2fsck_t ctx) |
| { |
| ext2_filsys fs = ctx->fs; |
| blk_t blk; |
| struct ext2_inode inode; |
| char * block; |
| struct problem_context pctx; |
| |
| clear_problem_context(&pctx); |
| |
| if (ext2fs_test_inode_bitmap(ctx->inode_used_map, EXT2_ROOT_INO)) { |
| /* |
| * If the root inode is not a directory, die here. The |
| * user must have answered 'no' in pass1 when we |
| * offered to clear it. |
| */ |
| if (!(ext2fs_test_inode_bitmap(ctx->inode_dir_map, |
| EXT2_ROOT_INO))) { |
| fix_problem(ctx, PR_3_ROOT_NOT_DIR_ABORT, &pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| } |
| return; |
| } |
| |
| if (!fix_problem(ctx, PR_3_NO_ROOT_INODE, &pctx)) { |
| fix_problem(ctx, PR_3_NO_ROOT_INODE_ABORT, &pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| return; |
| } |
| |
| e2fsck_read_bitmaps(ctx); |
| |
| /* |
| * First, find a free block |
| */ |
| pctx.errcode = ext2fs_new_block(fs, 0, ctx->block_found_map, &blk); |
| if (pctx.errcode) { |
| pctx.str = "ext2fs_new_block"; |
| fix_problem(ctx, PR_3_CREATE_ROOT_ERROR, &pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| return; |
| } |
| ext2fs_mark_block_bitmap(ctx->block_found_map, blk); |
| ext2fs_mark_block_bitmap(fs->block_map, blk); |
| ext2fs_mark_bb_dirty(fs); |
| |
| /* |
| * Now let's create the actual data block for the inode |
| */ |
| pctx.errcode = ext2fs_new_dir_block(fs, EXT2_ROOT_INO, EXT2_ROOT_INO, |
| &block); |
| if (pctx.errcode) { |
| pctx.str = "ext2fs_new_dir_block"; |
| fix_problem(ctx, PR_3_CREATE_ROOT_ERROR, &pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| return; |
| } |
| |
| pctx.errcode = ext2fs_write_dir_block(fs, blk, block); |
| if (pctx.errcode) { |
| pctx.str = "ext2fs_write_dir_block"; |
| fix_problem(ctx, PR_3_CREATE_ROOT_ERROR, &pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| return; |
| } |
| ext2fs_free_mem(&block); |
| |
| /* |
| * Set up the inode structure |
| */ |
| memset(&inode, 0, sizeof(inode)); |
| inode.i_mode = 040755; |
| inode.i_size = fs->blocksize; |
| inode.i_atime = inode.i_ctime = inode.i_mtime = ctx->now; |
| inode.i_links_count = 2; |
| ext2fs_iblk_set(fs, &inode, 1); |
| inode.i_block[0] = blk; |
| |
| /* |
| * Write out the inode. |
| */ |
| pctx.errcode = ext2fs_write_new_inode(fs, EXT2_ROOT_INO, &inode); |
| if (pctx.errcode) { |
| pctx.str = "ext2fs_write_inode"; |
| fix_problem(ctx, PR_3_CREATE_ROOT_ERROR, &pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| return; |
| } |
| |
| /* |
| * Miscellaneous bookkeeping... |
| */ |
| e2fsck_add_dir_info(ctx, EXT2_ROOT_INO, EXT2_ROOT_INO); |
| ext2fs_icount_store(ctx->inode_count, EXT2_ROOT_INO, 2); |
| ext2fs_icount_store(ctx->inode_link_info, EXT2_ROOT_INO, 2); |
| |
| ext2fs_mark_inode_bitmap(ctx->inode_used_map, EXT2_ROOT_INO); |
| ext2fs_mark_inode_bitmap(ctx->inode_dir_map, EXT2_ROOT_INO); |
| ext2fs_mark_inode_bitmap(fs->inode_map, EXT2_ROOT_INO); |
| ext2fs_mark_ib_dirty(fs); |
| } |
| |
| /* |
| * This subroutine is responsible for making sure that a particular |
| * directory is connected to the root; if it isn't we trace it up as |
| * far as we can go, and then offer to connect the resulting parent to |
| * the lost+found. We have to do loop detection; if we ever discover |
| * a loop, we treat that as a disconnected directory and offer to |
| * reparent it to lost+found. |
| * |
| * However, loop detection is expensive, because for very large |
| * filesystems, the inode_loop_detect bitmap is huge, and clearing it |
| * is non-trivial. Loops in filesystems are also a rare error case, |
| * and we shouldn't optimize for error cases. So we try two passes of |
| * the algorithm. The first time, we ignore loop detection and merely |
| * increment a counter; if the counter exceeds some extreme threshold, |
| * then we try again with the loop detection bitmap enabled. |
| */ |
| static int check_directory(e2fsck_t ctx, ext2_ino_t dir, |
| struct problem_context *pctx) |
| { |
| ext2_filsys fs = ctx->fs; |
| ext2_ino_t ino = dir, parent; |
| int loop_pass = 0, parent_count = 0; |
| |
| while (1) { |
| /* |
| * Mark this inode as being "done"; by the time we |
| * return from this function, the inode we either be |
| * verified as being connected to the directory tree, |
| * or we will have offered to reconnect this to |
| * lost+found. |
| * |
| * If it was marked done already, then we've reached a |
| * parent we've already checked. |
| */ |
| if (ext2fs_mark_inode_bitmap(inode_done_map, ino)) |
| break; |
| |
| if (e2fsck_dir_info_get_parent(ctx, ino, &parent)) { |
| fix_problem(ctx, PR_3_NO_DIRINFO, pctx); |
| return 0; |
| } |
| |
| /* |
| * If this directory doesn't have a parent, or we've |
| * seen the parent once already, then offer to |
| * reparent it to lost+found |
| */ |
| if (!parent || |
| (loop_pass && |
| (ext2fs_test_inode_bitmap(inode_loop_detect, |
| parent)))) { |
| pctx->ino = ino; |
| if (fix_problem(ctx, PR_3_UNCONNECTED_DIR, pctx)) { |
| if (e2fsck_reconnect_file(ctx, pctx->ino)) |
| ext2fs_unmark_valid(fs); |
| else { |
| fix_dotdot(ctx, pctx->ino, |
| ctx->lost_and_found); |
| parent = ctx->lost_and_found; |
| } |
| } |
| break; |
| } |
| ino = parent; |
| if (loop_pass) { |
| ext2fs_mark_inode_bitmap(inode_loop_detect, ino); |
| } else if (parent_count++ > 2048) { |
| /* |
| * If we've run into a path depth that's |
| * greater than 2048, try again with the inode |
| * loop bitmap turned on and start from the |
| * top. |
| */ |
| loop_pass = 1; |
| if (inode_loop_detect) |
| ext2fs_clear_inode_bitmap(inode_loop_detect); |
| else { |
| pctx->errcode = ext2fs_allocate_inode_bitmap(fs, _("inode loop detection bitmap"), &inode_loop_detect); |
| if (pctx->errcode) { |
| pctx->num = 1; |
| fix_problem(ctx, |
| PR_3_ALLOCATE_IBITMAP_ERROR, pctx); |
| ctx->flags |= E2F_FLAG_ABORT; |
| return -1; |
| } |
| } |
| ino = dir; |
| } |
| } |
| |
| /* |
| * Make sure that .. and the parent directory are the same; |
| * offer to fix it if not. |
| */ |
| pctx->ino = dir; |
| if (e2fsck_dir_info_get_dotdot(ctx, dir, &pctx->ino2) || |
| e2fsck_dir_info_get_parent(ctx, dir, &pctx->dir)) { |
| fix_problem(ctx, PR_3_NO_DIRINFO, pctx); |
| return 0; |
| } |
| if (pctx->ino2 != pctx->dir) { |
| if (fix_problem(ctx, PR_3_BAD_DOT_DOT, pctx)) |
| fix_dotdot(ctx, dir, pctx->dir); |
| } |
| return 0; |
| } |
| |
| /* |
| * This routine gets the lost_and_found inode, making it a directory |
| * if necessary |
| */ |
| ext2_ino_t e2fsck_get_lost_and_found(e2fsck_t ctx, int fix) |
| { |
| ext2_filsys fs = ctx->fs; |
| ext2_ino_t ino; |
| blk_t blk; |
| errcode_t retval; |
| struct ext2_inode inode; |
| char * block; |
| static const char name[] = "lost+found"; |
| struct problem_context pctx; |
| |
| if (ctx->lost_and_found) |
| return ctx->lost_and_found; |
| |
| clear_problem_context(&pctx); |
| |
| retval = ext2fs_lookup(fs, EXT2_ROOT_INO, name, |
| sizeof(name)-1, 0, &ino); |
| if (retval && !fix) |
| return 0; |
| if (!retval) { |
| if (ext2fs_test_inode_bitmap(ctx->inode_dir_map, ino)) { |
| ctx->lost_and_found = ino; |
| return ino; |
| } |
| |
| /* Lost+found isn't a directory! */ |
| if (!fix) |
| return 0; |
| pctx.ino = ino; |
| if (!fix_problem(ctx, PR_3_LPF_NOTDIR, &pctx)) |
| return 0; |
| |
| /* OK, unlink the old /lost+found file. */ |
| pctx.errcode = ext2fs_unlink(fs, EXT2_ROOT_INO, name, ino, 0); |
| if (pctx.errcode) { |
| pctx.str = "ext2fs_unlink"; |
| fix_problem(ctx, PR_3_CREATE_LPF_ERROR, &pctx); |
| return 0; |
| } |
| (void) e2fsck_dir_info_set_parent(ctx, ino, 0); |
| e2fsck_adjust_inode_count(ctx, ino, -1); |
| } else if (retval != EXT2_ET_FILE_NOT_FOUND) { |
| pctx.errcode = retval; |
| fix_problem(ctx, PR_3_ERR_FIND_LPF, &pctx); |
| } |
| if (!fix_problem(ctx, PR_3_NO_LF_DIR, 0)) |
| return 0; |
| |
| /* |
| * Read the inode and block bitmaps in; we'll be messing with |
| * them. |
| */ |
| e2fsck_read_bitmaps(ctx); |
| |
| /* |
| * First, find a free block |
| */ |
| retval = ext2fs_new_block(fs, 0, ctx->block_found_map, &blk); |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(ctx, PR_3_ERR_LPF_NEW_BLOCK, &pctx); |
| return 0; |
| } |
| ext2fs_mark_block_bitmap(ctx->block_found_map, blk); |
| ext2fs_block_alloc_stats(fs, blk, +1); |
| |
| /* |
| * Next find a free inode. |
| */ |
| retval = ext2fs_new_inode(fs, EXT2_ROOT_INO, 040700, |
| ctx->inode_used_map, &ino); |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(ctx, PR_3_ERR_LPF_NEW_INODE, &pctx); |
| return 0; |
| } |
| ext2fs_mark_inode_bitmap(ctx->inode_used_map, ino); |
| ext2fs_mark_inode_bitmap(ctx->inode_dir_map, ino); |
| ext2fs_inode_alloc_stats2(fs, ino, +1, 1); |
| |
| /* |
| * Now let's create the actual data block for the inode |
| */ |
| retval = ext2fs_new_dir_block(fs, ino, EXT2_ROOT_INO, &block); |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(ctx, PR_3_ERR_LPF_NEW_DIR_BLOCK, &pctx); |
| return 0; |
| } |
| |
| retval = ext2fs_write_dir_block(fs, blk, block); |
| ext2fs_free_mem(&block); |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(ctx, PR_3_ERR_LPF_WRITE_BLOCK, &pctx); |
| return 0; |
| } |
| |
| /* |
| * Set up the inode structure |
| */ |
| memset(&inode, 0, sizeof(inode)); |
| inode.i_mode = 040700; |
| inode.i_size = fs->blocksize; |
| inode.i_atime = inode.i_ctime = inode.i_mtime = ctx->now; |
| inode.i_links_count = 2; |
| ext2fs_iblk_set(fs, &inode, 1); |
| inode.i_block[0] = blk; |
| |
| /* |
| * Next, write out the inode. |
| */ |
| pctx.errcode = ext2fs_write_new_inode(fs, ino, &inode); |
| if (pctx.errcode) { |
| pctx.str = "ext2fs_write_inode"; |
| fix_problem(ctx, PR_3_CREATE_LPF_ERROR, &pctx); |
| return 0; |
| } |
| /* |
| * Finally, create the directory link |
| */ |
| pctx.errcode = ext2fs_link(fs, EXT2_ROOT_INO, name, ino, EXT2_FT_DIR); |
| if (pctx.errcode) { |
| pctx.str = "ext2fs_link"; |
| fix_problem(ctx, PR_3_CREATE_LPF_ERROR, &pctx); |
| return 0; |
| } |
| |
| /* |
| * Miscellaneous bookkeeping that needs to be kept straight. |
| */ |
| e2fsck_add_dir_info(ctx, ino, EXT2_ROOT_INO); |
| e2fsck_adjust_inode_count(ctx, EXT2_ROOT_INO, 1); |
| ext2fs_icount_store(ctx->inode_count, ino, 2); |
| ext2fs_icount_store(ctx->inode_link_info, ino, 2); |
| ctx->lost_and_found = ino; |
| #if 0 |
| printf("/lost+found created; inode #%lu\n", ino); |
| #endif |
| return ino; |
| } |
| |
| /* |
| * This routine will connect a file to lost+found |
| */ |
| int e2fsck_reconnect_file(e2fsck_t ctx, ext2_ino_t ino) |
| { |
| ext2_filsys fs = ctx->fs; |
| errcode_t retval; |
| char name[80]; |
| struct problem_context pctx; |
| struct ext2_inode inode; |
| int file_type = 0; |
| |
| clear_problem_context(&pctx); |
| pctx.ino = ino; |
| |
| if (!ctx->bad_lost_and_found && !ctx->lost_and_found) { |
| if (e2fsck_get_lost_and_found(ctx, 1) == 0) |
| ctx->bad_lost_and_found++; |
| } |
| if (ctx->bad_lost_and_found) { |
| fix_problem(ctx, PR_3_NO_LPF, &pctx); |
| return 1; |
| } |
| |
| sprintf(name, "#%u", ino); |
| if (ext2fs_read_inode(fs, ino, &inode) == 0) |
| file_type = ext2_file_type(inode.i_mode); |
| retval = ext2fs_link(fs, ctx->lost_and_found, name, ino, file_type); |
| if (retval == EXT2_ET_DIR_NO_SPACE) { |
| if (!fix_problem(ctx, PR_3_EXPAND_LF_DIR, &pctx)) |
| return 1; |
| retval = e2fsck_expand_directory(ctx, ctx->lost_and_found, |
| 1, 0); |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(ctx, PR_3_CANT_EXPAND_LPF, &pctx); |
| return 1; |
| } |
| retval = ext2fs_link(fs, ctx->lost_and_found, name, |
| ino, file_type); |
| } |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(ctx, PR_3_CANT_RECONNECT, &pctx); |
| return 1; |
| } |
| e2fsck_adjust_inode_count(ctx, ino, 1); |
| |
| return 0; |
| } |
| |
| /* |
| * Utility routine to adjust the inode counts on an inode. |
| */ |
| errcode_t e2fsck_adjust_inode_count(e2fsck_t ctx, ext2_ino_t ino, int adj) |
| { |
| ext2_filsys fs = ctx->fs; |
| errcode_t retval; |
| struct ext2_inode inode; |
| |
| if (!ino) |
| return 0; |
| |
| retval = ext2fs_read_inode(fs, ino, &inode); |
| if (retval) |
| return retval; |
| |
| #if 0 |
| printf("Adjusting link count for inode %lu by %d (from %d)\n", ino, adj, |
| inode.i_links_count); |
| #endif |
| |
| if (adj == 1) { |
| ext2fs_icount_increment(ctx->inode_count, ino, 0); |
| if (inode.i_links_count == (__u16) ~0) |
| return 0; |
| ext2fs_icount_increment(ctx->inode_link_info, ino, 0); |
| inode.i_links_count++; |
| } else if (adj == -1) { |
| ext2fs_icount_decrement(ctx->inode_count, ino, 0); |
| if (inode.i_links_count == 0) |
| return 0; |
| ext2fs_icount_decrement(ctx->inode_link_info, ino, 0); |
| inode.i_links_count--; |
| } |
| |
| retval = ext2fs_write_inode(fs, ino, &inode); |
| if (retval) |
| return retval; |
| |
| return 0; |
| } |
| |
| /* |
| * Fix parent --- this routine fixes up the parent of a directory. |
| */ |
| struct fix_dotdot_struct { |
| ext2_filsys fs; |
| ext2_ino_t parent; |
| int done; |
| e2fsck_t ctx; |
| }; |
| |
| static int fix_dotdot_proc(struct ext2_dir_entry *dirent, |
| int offset EXT2FS_ATTR((unused)), |
| int blocksize EXT2FS_ATTR((unused)), |
| char *buf EXT2FS_ATTR((unused)), |
| void *priv_data) |
| { |
| struct fix_dotdot_struct *fp = (struct fix_dotdot_struct *) priv_data; |
| errcode_t retval; |
| struct problem_context pctx; |
| |
| if ((dirent->name_len & 0xFF) != 2) |
| return 0; |
| if (strncmp(dirent->name, "..", 2)) |
| return 0; |
| |
| clear_problem_context(&pctx); |
| |
| retval = e2fsck_adjust_inode_count(fp->ctx, dirent->inode, -1); |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(fp->ctx, PR_3_ADJUST_INODE, &pctx); |
| } |
| retval = e2fsck_adjust_inode_count(fp->ctx, fp->parent, 1); |
| if (retval) { |
| pctx.errcode = retval; |
| fix_problem(fp->ctx, PR_3_ADJUST_INODE, &pctx); |
| } |
| dirent->inode = fp->parent; |
| if (fp->ctx->fs->super->s_feature_incompat & |
| EXT2_FEATURE_INCOMPAT_FILETYPE) |
| dirent->name_len = (dirent->name_len & 0xFF) | |
| (EXT2_FT_DIR << 8); |
| else |
| dirent->name_len = dirent->name_len & 0xFF; |
| |
| fp->done++; |
| return DIRENT_ABORT | DIRENT_CHANGED; |
| } |
| |
| static void fix_dotdot(e2fsck_t ctx, ext2_ino_t ino, ext2_ino_t parent) |
| { |
| ext2_filsys fs = ctx->fs; |
| errcode_t retval; |
| struct fix_dotdot_struct fp; |
| struct problem_context pctx; |
| |
| fp.fs = fs; |
| fp.parent = parent; |
| fp.done = 0; |
| fp.ctx = ctx; |
| |
| #if 0 |
| printf("Fixing '..' of inode %lu to be %lu...\n", ino, parent); |
| #endif |
| |
| clear_problem_context(&pctx); |
| pctx.ino = ino; |
| retval = ext2fs_dir_iterate(fs, ino, DIRENT_FLAG_INCLUDE_EMPTY, |
| 0, fix_dotdot_proc, &fp); |
| if (retval || !fp.done) { |
| pctx.errcode = retval; |
| fix_problem(ctx, retval ? PR_3_FIX_PARENT_ERR : |
| PR_3_FIX_PARENT_NOFIND, &pctx); |
| ext2fs_unmark_valid(fs); |
| } |
| (void) e2fsck_dir_info_set_dotdot(ctx, ino, parent); |
| if (e2fsck_dir_info_set_parent(ctx, ino, ctx->lost_and_found)) |
| fix_problem(ctx, PR_3_NO_DIRINFO, &pctx); |
| |
| return; |
| } |
| |
| /* |
| * These routines are responsible for expanding a /lost+found if it is |
| * too small. |
| */ |
| |
| struct expand_dir_struct { |
| int num; |
| int guaranteed_size; |
| int newblocks; |
| int last_block; |
| errcode_t err; |
| e2fsck_t ctx; |
| }; |
| |
| static int expand_dir_proc(ext2_filsys fs, |
| blk_t *blocknr, |
| e2_blkcnt_t blockcnt, |
| blk_t ref_block EXT2FS_ATTR((unused)), |
| int ref_offset EXT2FS_ATTR((unused)), |
| void *priv_data) |
| { |
| struct expand_dir_struct *es = (struct expand_dir_struct *) priv_data; |
| blk_t new_blk; |
| static blk_t last_blk = 0; |
| char *block; |
| errcode_t retval; |
| e2fsck_t ctx; |
| |
| ctx = es->ctx; |
| |
| if (es->guaranteed_size && blockcnt >= es->guaranteed_size) |
| return BLOCK_ABORT; |
| |
| if (blockcnt > 0) |
| es->last_block = blockcnt; |
| if (*blocknr) { |
| last_blk = *blocknr; |
| return 0; |
| } |
| retval = ext2fs_new_block(fs, last_blk, ctx->block_found_map, |
| &new_blk); |
| if (retval) { |
| es->err = retval; |
| return BLOCK_ABORT; |
| } |
| if (blockcnt > 0) { |
| retval = ext2fs_new_dir_block(fs, 0, 0, &block); |
| if (retval) { |
| es->err = retval; |
| return BLOCK_ABORT; |
| } |
| es->num--; |
| retval = ext2fs_write_dir_block(fs, new_blk, block); |
| } else { |
| retval = ext2fs_get_mem(fs->blocksize, &block); |
| if (retval) { |
| es->err = retval; |
| return BLOCK_ABORT; |
| } |
| memset(block, 0, fs->blocksize); |
| retval = io_channel_write_blk(fs->io, new_blk, 1, block); |
| } |
| if (retval) { |
| es->err = retval; |
| return BLOCK_ABORT; |
| } |
| ext2fs_free_mem(&block); |
| *blocknr = new_blk; |
| ext2fs_mark_block_bitmap(ctx->block_found_map, new_blk); |
| ext2fs_block_alloc_stats(fs, new_blk, +1); |
| es->newblocks++; |
| |
| if (es->num == 0) |
| return (BLOCK_CHANGED | BLOCK_ABORT); |
| else |
| return BLOCK_CHANGED; |
| } |
| |
| errcode_t e2fsck_expand_directory(e2fsck_t ctx, ext2_ino_t dir, |
| int num, int guaranteed_size) |
| { |
| ext2_filsys fs = ctx->fs; |
| errcode_t retval; |
| struct expand_dir_struct es; |
| struct ext2_inode inode; |
| |
| if (!(fs->flags & EXT2_FLAG_RW)) |
| return EXT2_ET_RO_FILSYS; |
| |
| /* |
| * Read the inode and block bitmaps in; we'll be messing with |
| * them. |
| */ |
| e2fsck_read_bitmaps(ctx); |
| |
| retval = ext2fs_check_directory(fs, dir); |
| if (retval) |
| return retval; |
| |
| es.num = num; |
| es.guaranteed_size = guaranteed_size; |
| es.last_block = 0; |
| es.err = 0; |
| es.newblocks = 0; |
| es.ctx = ctx; |
| |
| retval = ext2fs_block_iterate2(fs, dir, BLOCK_FLAG_APPEND, |
| 0, expand_dir_proc, &es); |
| |
| if (es.err) |
| return es.err; |
| |
| /* |
| * Update the size and block count fields in the inode. |
| */ |
| retval = ext2fs_read_inode(fs, dir, &inode); |
| if (retval) |
| return retval; |
| |
| inode.i_size = (es.last_block + 1) * fs->blocksize; |
| ext2fs_iblk_add_blocks(fs, &inode, es.newblocks); |
| |
| e2fsck_write_inode(ctx, dir, &inode, "expand_directory"); |
| |
| return 0; |
| } |
| |