| Version 3.7 - December 13, 2012 |
| |
| * Fix: Gracefully handle failure of register pretty-printer (-d option) |
| * Feature: Add support for et131x registers (-d option) |
| * Feature: Basic optical diagnostics for SFF-8472 modules (-m option) |
| |
| Version 3.6 - October 5, 2012 |
| |
| * Feature: Allow setting MDI-X state (-s option) |
| * Fix: Preserve pause advertising bits when setting speed and |
| duplex with autoneg on (-s option) |
| * Fix: Don't call ioctl to set EEE parameters if they are the same |
| as the current parameters (--set-eee option) |
| |
| Version 3.5 - August 2, 2012 |
| |
| * Feature: Display support for 1000BASE-KX and 10GBASE-KX4 link modes |
| * Feature: Energy-Efficient Ethernet (EEE) configuration |
| (--show-eee and --set-eee options) |
| * Fix: Don't trust drivers to null-terminate strings |
| * Feature: Display support for 40G link modes |
| * Package: Update RPM summary, description and URL |
| * Package: Exclude redundant documentation from RPM |
| |
| Version 3.4.2 - July 16, 2012 |
| |
| * Fix: Fix regression in RX NFC rule insertion for drivers that do |
| not select rule locations (-N/-U option) |
| * Fix: Remove bogus error message when changing offload settings |
| on Linux < 2.6.39 (-K option) |
| * Fix: Use alternate method to check for VLAN tag offload on Linux |
| < 2.6.37 (-k option) |
| |
| Version 3.4.1 - June 13, 2012 |
| |
| * Fix: Work around failure of ETHTOOL_GSSET_INFO for unprivileged |
| users (-k option) |
| * Fix: Report any unexpected error code from ETHTOOL_GSSET_INFO |
| (-k and -K options) |
| * Doc: Fix the date of the man page to match the last update |
| |
| Version 3.4 - June 8, 2012 |
| |
| * Cleanup: Merge RX NFC options |
| * Doc: Improve description of RX NFC options |
| * Doc: Add ntuple to the -K option in the man page |
| * Feature: Show time stamping capabilities (-T option) |
| * Feature: Dump plug-in module EEPROM (-m option) |
| * Feature: Show and change all generic net device features |
| (-k and -K options) |
| |
| Version 3.2 - January 12, 2012 |
| |
| * Feature: Add support for querying and setting private flags |
| (--show-priv-flags, --set-priv-flags options) |
| * Feature: Omit zero values in Solarflare register tables (-d option) |
| * Feature: Allow driver to select RX NFC rule location (-U option) |
| * Fix: Correct register dump offsets for Intel 82575 chipsets |
| (-d option) |
| |
| Version 3.1 - November 16, 2011 |
| |
| * Fix: Show all non-zero registers for tg3 (-d option) |
| * Feature: Add support for external loopback test (-t option) |
| * Fix: Show correct flow control registers for Intel 82599 (-d option) |
| * Feature: Add support for reporting and configuring numbers of |
| channels/queues (-l and -L options) |
| * Feature: Report pause frame autonegotiation result (-a option) |
| * Doc: Change device name metavariable from 'ethX' to 'devname' |
| * Doc: Fix various layout problems |
| * Cleanup: Reorganise and add test cases for argument parsing |
| * Fix: Strictly check for extraneous or missing arguments; in |
| particular, fail if the device name is missing |
| |
| Version 3.0 - August 4, 2011 |
| |
| * Feature: Report supported pause frame modes |
| * Feature: Support firmware dump (-w and -W options) |
| * Feature: Report advertised and supported 20G link modes |
| * Feature: Add an 'l4data' option for ip4 filters (-U option) |
| * Fix: Correct swapped h_source and h_dest fields for ether filters |
| (-U option) |
| * Fix: Set ip_ver field correctly for ip4 filters (-U option) |
| * Fix: Correct parameter validation for -e and -E options; in |
| particular, treat the 'magic' value as unsigned |
| |
| Version 2.6.39 - June 1, 2011 |
| |
| * Feature: Report some driver features (-i option) |
| * Doc: Remove misleading 'Auto' advertising mask from manual page |
| * Doc: Improve table formatting on manual page, using tbl |
| * Doc: Remove initial blank page in printed manual page |
| * Doc: Fix line-wrapping of options |
| * Feature: Add support for ESP as a separate protocol from AH |
| (-n, -N, -u and -U options) |
| * Cleanup: Remove support for showing RX n-tuple settings |
| (-u option), which was never implemented correctly in the kernel |
| * Feature: Add support for RX network flow classifier (NFC) |
| (-u and -U options) |
| * Feature: Add support for e1000 M88 PHY registers (-d option) |
| * Cleanup: Change bug-address to netdev |
| |
| Version 2.6.38 - March 15, 2011 |
| |
| * Doc: Fix spelling and spacing in online help |
| * Doc: Update date, version and web site reference in manual page |
| * Doc: Fix spelling, capitalisation, consistency and style in |
| manual page |
| * Doc: Generalise some references to network devices rather than |
| Ethernet devices |
| * Fix: Don't silently ignore speed/duplex when autoneg is on |
| * Fix: Report an error (rather than full usage information) if |
| given an unrecognised option |
| * Feature: Add --version option |
| |
| Version 2.6.37 - January 5, 2011 |
| |
| * Fix: Build fix for distributions with kernel headers from |
| Linux 2.6.9 or earlier |
| |
| Version 2.6.36 - November 16, 2010 |
| |
| * Fix: RX n-tuple masks and documentation |
| * Feature: Ethernet-level RX n-tuple filtering and 'clear' action |
| * Feature: stmmac register dump support |
| * Feature: get permanent address (-P) option |
| * Feature: VLAN acceleration control |
| |
| Version 2.6.35 - August 10, 2010 |
| |
| * Feature: sfc register dump support |
| * Feature: improve cmd line parsing of ints, IPv4 addresses |
| * Feature: support ethtool named flags, messaging types |
| * Feature: minor man page fixes |
| * Feature: control RX flow hash indirection |
| |
| Version 2.6.34 - May 26, 2010 |
| |
| * Feature: Support n-tuple filter programming |
| * Feature: Support rx hashing, v2 (targetted for 2.6.35) |
| * Feature: Add names of newer Marvell chips |
| |
| Version 2.6.33 - February 24, 2010 |
| |
| This version introduces a new release numbering scheme, based |
| on the latest upstream kernel interface supported. |
| |
| * Fix: several man page corrections |
| * Feature: rx flow hash configuration |
| * Feature: report 10000baseT support, where available |
| * Feature: report MDI-X status, pause auto-neg, link partner adverts |
| * Feature: support additional port types |
| * Feature: support arbitrary speeds, faster than 65535 Mb |
| * Feature: large and generic receive offload (LRO, GRO) support |
| * Feature: option to flash firmware image from specified file |
| * Feature: support for block writing of EEPROMs |
| * Feature: marvell register dump update |
| * Feature: at76c50x-usb, e1000e, igb, ixgbe, r8169 register dump support |
| * Cleanup: remove support for RX hashing by port (was removed in |
| kernel by 59089d8d162ddcb5c434672e915331964d38a754) |
| * Doc: Explicitly ship GPLv2 license, rather than relying |
| on autotools to supply it for us (autotools started auto-installing |
| GPLv3 recently) |
| |
| Version 6 - July 26, 2007 |
| |
| * Fix/security: Fix handling of statistics where the label |
| is exactly 32 bytes (ETH_GSTRING_LEN). |
| * Feature: Add ability to change the advertised speed/duplex |
| to a different range of values, rather than all-or-one. |
| * Feature: ixgb register dump support |
| * Feature: sky2 register dump support |
| * Feature: Fabric7 VIOC register dump support |
| * Feature: Decode raw register dump stored in a file |
| * Feature: Add ability to force hex register dump, if desired |
| * Feature: update e1000 register dump |
| * Feature: Additional 10Gbps support |
| * Feature: Add 2.5G support |
| * Feature: Update r8169 register dump |
| * Feature: SMSC LAN911x/LAN921x register dump support |
| * Cleanup: Update internal ethtool.h copy to match upstream |
| kernel 2.6.23-rc1 version of ethtool.h. |
| |
| Version 5 - September 1, 2006 |
| |
| * Security: Avoid potential buffer overflow |
| * Feature: GSO support |
| * Feature: skge register dump |
| |
| Version 4 - July 18, 2006 |
| |
| * Feature: UFO support |
| * Feature: support long options |
| * Features: e1000, pcnet32, tg3 updates |
| * Feature: added PPC4xx EMAC support |
| * Feature: Use hexdump instead of single values for register dump |
| |
| Version 3 - January 27, 2005 |
| |
| * Feature: r8159 register dump support |
| * Feature / bug fix: Support advertising gigabit ethernet |
| * Bug fix: make sure to advertise 10baseT-HD |
| * Other minor bug fixes. |
| |
| Version 2 - August 17, 2004 |
| |
| * Feature: ethtool register dump raw mode |
| * Feature: return results of self-test back to OS via exit(2) |
| * Feature: add verbose register dump for pcnet32, fec_8xx |
| * Maintenance: update to more recent autoconf |
| * Maintenance: minor updates to e1000-specific module |
| * Bug fix: Remove silly restriction on ethernet interface naming |
| |
| Version 1.8 - July 19, 2003 |
| |
| * Feature: Support amd8111e register dumps |
| * Feature: Support TSO enable/disable |
| * Feature: Support 10 gigabit ethernet |
| * Feature: Support writing EEPROM data |
| * Feature: Output e100 MDI/MDI-x status in register dump |
| * Feature: Clean up RealTek (RTL) chip output, support new chips. |
| * Feature: More supported e1000 devices. |
| * Bug fix: Properly set ecmd.advertising |
| * Bug fix: Fix leaks, handle some error conditions better. |
| |
| Version 1.7 - October 21, 2002 |
| |
| * Feature: Support e100 register dumps |
| * Feature: Support tg3 eeprom dumps |
| * Feature: Support partial eeprom dumps (with non-zero offsets) |
| * Feature: Support decimal/octal/hex numbers transparently, |
| at the user's discretion. |
| |
| Version 1.6 - June 20, 2002 |
| |
| * Feature: Support e1000 register dumps |
| * Feature: Support RealTek RTL-8139C+ and RTL-8169 register dumps |
| * Feature: Support coalescing config (ETHTOOL_[GS]COALESCE) |
| * Feature: Support ring param config (ETHTOOL_[GS]RINGPARAM) |
| * Feature: Support pause param config (ETHTOOL_[GS]PAUSEPARAM) |
| * Feature: Support physical NIC identification (ETHTOOL_PHYS_ID) |
| * Feature: Support NIC self-testing (ETHTOOL_TEST) |
| * Feature: Support NIC checksum/scatter-gather configuration |
| (ETHTOOL_[GS]RXCSUM, ETHTOOL_[GS]TXCSUM, ETHTOOL_[GS]SG) |
| |
| Version 1.5 - Mar 4, 2002 |
| |
| * Fix: support usb network interfaces |
| * Fix: include redhat spec file in autoconf build system |
| * Fix: minor fixes to natsemi register dump |
| * Feature: report advertised as well as supported media, |
| when printing device settings. |
| |
| Version 1.4 - Nov 19, 2001 |
| |
| * Support builds on configurations missing SIOCETHTOOL constant. |
| * Import ethtool.h from kernel 2.4.15-pre6. |
| * Support retrieval/setting of per-driver debug levels |
| (ETHTOOL G/SMSGLVL) |
| * Support pretty-printing register dumps on natsemi, de2104x |
| (ETHTOOL GREGS) |
| * Support restarting autonegotiation (ETHTOOL NWAY_RST) |
| * Support obtaining link status (ETHTOOL GLINK) |
| |
| Version 1.3 - Aug 02, 2001 |
| |
| * Support Wake-on-LAN (ETHTOOL GWOL and ETHTOOL SWOL ioctl). |
| |
| Version 1.2 - May 17, 2001 |
| |
| * Support ETHTOOL_GDRVINFO ioctl, which obtains |
| information from the ethernet driver associated |
| with the specified interface. |
| |