| /* Copyright 2004 IBM Corporation (jklewis@us.ibm.com) */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include "internal.h" |
| |
| #define BIT0 0x0001 |
| #define BIT1 0x0002 |
| #define BIT2 0x0004 |
| #define BIT3 0x0008 |
| #define BIT4 0x0010 |
| #define BIT5 0x0020 |
| #define BIT6 0x0040 |
| #define BIT7 0x0080 |
| #define BIT8 0x0100 |
| #define BIT9 0x0200 |
| #define BIT10 0x0400 |
| #define BIT11 0x0800 |
| #define BIT12 0x1000 |
| #define BIT13 0x2000 |
| #define BIT14 0x4000 |
| #define BIT15 0x8000 |
| |
| int pcnet32_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs) |
| { |
| int i, csr; |
| u16 *data = (u16 *) regs->data; |
| int len = regs->len / 2; |
| u16 temp,*ptr; |
| |
| printf("Driver: %s\n",info->driver); |
| printf("Version: %s\n",info->version); |
| |
| printf("APROM: "); |
| for (i=0; i<8; i++) |
| printf(" %04x ", data[i]); |
| printf("\n"); |
| |
| csr = i; |
| for (; i<100; i++) |
| { |
| if (((i-csr) & 7) == 0) printf("CSR%02d: ", i-csr); |
| printf(" %04x ", data[i]); |
| if (((i-csr) & 7) == 7) printf("\n"); |
| } |
| if (((i-csr) & 7) != 7) printf("\n"); |
| |
| csr = i; |
| for (; i<136; i++) |
| { |
| if (((i-csr) & 7) == 0) printf("BCR%02d: ", i-csr); |
| printf(" %04x ", data[i]); |
| if (((i-csr) & 7) == 7) printf("\n"); |
| } |
| if (((i-csr) & 7) != 7) printf("\n"); |
| |
| csr = i; |
| for (; i<len; i++) |
| { |
| if (((i-csr) & 7) == 0) printf("MII%02d: ", (i-csr) & 0x1f); |
| printf(" %04x ", data[i]); |
| if (((i-csr) & 7) == 7) printf("\n"); |
| } |
| if (((i-csr) & 7) != 7) printf("\n"); |
| printf("\n"); |
| |
| ptr=&data[8]; /* start of the CSRs */ |
| |
| printf("CSR0: Status and Control 0x%04x\n ",ptr[0]); |
| temp=ptr[0]; |
| |
| if(temp & BIT15) printf("ERR "); |
| if(temp & BIT14) printf("BABL "); |
| if(temp & BIT13) printf("CERR "); |
| if(temp & BIT12) printf("MISS "); |
| if(temp & BIT11) printf("MERR "); |
| if(temp & BIT10) printf("RINT "); |
| if(temp & BIT9) printf("TINT "); |
| if(temp & BIT8) printf("IDON "); |
| if(temp & BIT7) printf("INTR "); |
| if(temp & BIT6) printf("INT "); |
| if(temp & BIT5) printf("RXON "); |
| if(temp & BIT4) printf("TXON "); |
| if(temp & BIT3) printf("TDMD "); |
| if(temp & BIT2) printf("STOP "); |
| if(temp & BIT1) printf("STRT "); |
| if(temp & BIT0) printf("INIT "); |
| |
| printf("\n"); |
| |
| printf("CSR3: Interrupt Mask 0x%04x\n ",ptr[3]); |
| temp=ptr[3]; |
| |
| if(temp & BIT14) printf("BABLM "); |
| if(temp & BIT12) printf("MISSM "); |
| if(temp & BIT11) printf("MERRM "); |
| if(temp & BIT10) printf("RINTM "); |
| if(temp & BIT9) printf("TINTM "); |
| if(temp & BIT8) printf("IDONM "); |
| if(temp & BIT6) printf("DXSUFLO "); |
| if(temp & BIT5) printf("LAPPEN "); |
| if(temp & BIT4) printf("DXMT2PD "); |
| if(temp & BIT3) printf("EMBA "); |
| if(temp & BIT2) printf("BSWP "); |
| |
| printf("\n"); |
| |
| printf("CSR4: Test and Features 0x%04x\n ",ptr[4]); |
| temp=ptr[4]; |
| |
| if(temp & BIT15) printf("EN124 "); |
| if(temp & BIT14) printf("DMAPLUS "); |
| if(temp & BIT12) printf("TXDPOLL "); |
| if(temp & BIT11) printf("APAD_XMT "); |
| if(temp & BIT10) printf("ASTRP_RCV "); |
| if(temp & BIT9) printf("MFCO "); |
| if(temp & BIT8) printf("MFCON "); |
| if(temp & BIT7) printf("UINTCMD "); |
| if(temp & BIT6) printf("UINT "); |
| if(temp & BIT5) printf("RCVCCO "); |
| if(temp & BIT4) printf("RCVCCOM "); |
| if(temp & BIT3) printf("TXSTRT "); |
| if(temp & BIT2) printf("TXSTRTM "); |
| if(temp & BIT1) printf("JAB "); |
| if(temp & BIT0) printf("JABM "); |
| |
| printf("\n"); |
| |
| printf("CSR5: Ext Control and Int 1 0x%04x\n ",ptr[5]); |
| temp=ptr[5]; |
| |
| if(temp & BIT15) printf("TOKINTD "); |
| if(temp & BIT14) printf("LTINTEN "); |
| if(temp & BIT11) printf("SINT "); |
| if(temp & BIT10) printf("SINTE "); |
| if(temp & BIT9) printf("SLPINT "); |
| if(temp & BIT8) printf("SLPINTE "); |
| if(temp & BIT7) printf("EXDINT "); |
| if(temp & BIT6) printf("EXDINTE "); |
| if(temp & BIT5) printf("MPPLBA "); |
| if(temp & BIT4) printf("MPINT "); |
| if(temp & BIT3) printf("MPINTE "); |
| if(temp & BIT2) printf("MPEN "); |
| if(temp & BIT1) printf("MPMODE "); |
| if(temp & BIT0) printf("SPND "); |
| |
| printf("\n"); |
| |
| printf("CSR7: Ext Control and Int 2 0x%04x\n ",ptr[7]); |
| temp=ptr[7]; |
| |
| if(temp & BIT15) printf("FASTSPNDE "); |
| if(temp & BIT14) printf("RXFRTG "); |
| if(temp & BIT13) printf("RDMD "); |
| if(temp & BIT12) printf("RXDPOLL "); |
| if(temp & BIT11) printf("STINT "); |
| if(temp & BIT10) printf("STINTE "); |
| if(temp & BIT9) printf("MREINT "); |
| if(temp & BIT8) printf("MREINTE "); |
| if(temp & BIT7) printf("MAPINT "); |
| if(temp & BIT6) printf("MAPINTE "); |
| if(temp & BIT5) printf("MCCINT "); |
| if(temp & BIT4) printf("MCCINTE "); |
| if(temp & BIT3) printf("MCCIINT "); |
| if(temp & BIT2) printf("MCCIINTE "); |
| if(temp & BIT1) printf("MIIPDTINT "); |
| if(temp & BIT0) printf("MIIPDTINTE "); |
| |
| printf("\n"); |
| |
| printf("CSR15: Mode 0x%04x\n",ptr[15]); |
| printf("CSR40: Current RX Byte Count 0x%04x\n",ptr[40]); |
| printf("CSR41: Current RX Status 0x%04x\n",ptr[41]); |
| printf("CSR42: Current TX Byte Count 0x%04x\n",ptr[42]); |
| printf("CSR43: Current TX Status 0x%04x\n",ptr[43]); |
| printf("CSR88: Chip ID Lower 0x%04x\n",ptr[88]); |
| temp = (((ptr[89] << 16) | ptr[88]) >> 12) & 0xffff; |
| switch (temp) { |
| case 0x2420: |
| printf(" PCnet/PCI 79C970\n"); |
| break; |
| case 0x2621: |
| printf(" PCnet/PCI II 79C970A\n"); |
| break; |
| case 0x2623: |
| printf(" PCnet/FAST 79C971\n"); |
| break; |
| case 0x2624: |
| printf(" PCnet/FAST+ 79C972\n"); |
| break; |
| case 0x2625: |
| printf(" PCnet/FAST III 79C973\n"); |
| break; |
| case 0x2626: |
| printf(" PCnet/Home 79C978\n"); |
| break; |
| case 0x2627: |
| printf(" PCnet/FAST III 79C975\n"); |
| break; |
| case 0x2628: |
| printf(" PCnet/PRO 79C976\n"); |
| break; |
| } |
| |
| printf("CSR89: Chip ID Upper 0x%04x\n ",ptr[89]); |
| temp=ptr[89]; |
| printf("VER: %04x PARTIDU: %04x\n",temp >> 12,temp & 0x00000fff); |
| |
| printf("CSR112: Missed Frame Count 0x%04x\n",ptr[90]); /* 90 is 112 */ |
| printf("CSR114: RX Collision Count 0x%04x\n",ptr[91]); |
| |
| printf("\n"); |
| |
| ptr=&data[100]; /* point to BCR 0 */ |
| |
| printf("BCR2: Misc. Configuration 0x%04x\n ",ptr[2]); |
| temp=ptr[2]; |
| |
| if(temp & BIT14) printf("TMAULOOP "); |
| if(temp & BIT12) printf("LEDPE "); |
| |
| if(temp & BIT8) printf("APROMWE "); |
| if(temp & BIT7) printf("INTLEVEL "); |
| |
| if(temp & BIT3) printf("EADISEL "); |
| if(temp & BIT2) printf("AWAKE "); |
| if(temp & BIT1) printf("ASEL "); |
| if(temp & BIT0) printf("XMAUSEL "); |
| |
| printf("\n"); |
| |
| printf("BCR9: Full-Duplex Control 0x%04x\n",ptr[9]); |
| printf("BCR18: Burst and Bus Control 0x%04x\n",ptr[18]); |
| |
| printf("BCR19: EEPROM Control and Status 0x%04x\n ",ptr[19]); |
| temp=ptr[19]; |
| if(temp & BIT15) printf("PVALID "); |
| if(temp & BIT13) printf("EEDET "); |
| printf("\n"); |
| |
| printf("BCR23: PCI Subsystem Vendor ID 0x%04x\n",ptr[23]); |
| printf("BCR24: PCI Subsystem ID 0x%04x\n",ptr[24]); |
| printf("BCR31: Software Timer 0x%04x\n",ptr[31]); |
| printf("BCR32: MII Control and Status 0x%04x\n",ptr[32]); |
| printf("BCR35: PCI Vendor ID 0x%04x\n",ptr[35]); |
| |
| return(0); |
| } |
| |