| |
| /* Copyright (C) 2003 Advanced Micro Devices Inc. */ |
| #include <stdio.h> |
| #include "internal.h" |
| |
| typedef enum { |
| /* VAL2 */ |
| RDMD0 = (1 << 16), |
| /* VAL1 */ |
| TDMD3 = (1 << 11), |
| TDMD2 = (1 << 10), |
| TDMD1 = (1 << 9), |
| TDMD0 = (1 << 8), |
| /* VAL0 */ |
| UINTCMD = (1 << 6), |
| RX_FAST_SPND = (1 << 5), |
| TX_FAST_SPND = (1 << 4), |
| RX_SPND = (1 << 3), |
| TX_SPND = (1 << 2), |
| INTREN = (1 << 1), |
| RUN = (1 << 0), |
| |
| CMD0_CLEAR = 0x000F0F7F, /* Command style register */ |
| |
| }CMD0_BITS; |
| typedef enum { |
| |
| /* VAL3 */ |
| CONDUIT_MODE = (1 << 29), |
| /* VAL2 */ |
| RPA = (1 << 19), |
| DRCVPA = (1 << 18), |
| DRCVBC = (1 << 17), |
| PROM = (1 << 16), |
| /* VAL1 */ |
| ASTRP_RCV = (1 << 13), |
| RCV_DROP0 = (1 << 12), |
| EMBA = (1 << 11), |
| DXMT2PD = (1 << 10), |
| LTINTEN = (1 << 9), |
| DXMTFCS = (1 << 8), |
| /* VAL0 */ |
| APAD_XMT = (1 << 6), |
| DRTY = (1 << 5), |
| INLOOP = (1 << 4), |
| EXLOOP = (1 << 3), |
| REX_RTRY = (1 << 2), |
| REX_UFLO = (1 << 1), |
| REX_LCOL = (1 << 0), |
| |
| CMD2_CLEAR = 0x3F7F3F7F, /* Command style register */ |
| |
| }CMD2_BITS; |
| typedef enum { |
| |
| /* VAL3 */ |
| ASF_INIT_DONE_ALIAS = (1 << 29), |
| /* VAL2 */ |
| JUMBO = (1 << 21), |
| VSIZE = (1 << 20), |
| VLONLY = (1 << 19), |
| VL_TAG_DEL = (1 << 18), |
| /* VAL1 */ |
| EN_PMGR = (1 << 14), |
| INTLEVEL = (1 << 13), |
| FORCE_FULL_DUPLEX = (1 << 12), |
| FORCE_LINK_STATUS = (1 << 11), |
| APEP = (1 << 10), |
| MPPLBA = (1 << 9), |
| /* VAL0 */ |
| RESET_PHY_PULSE = (1 << 2), |
| RESET_PHY = (1 << 1), |
| PHY_RST_POL = (1 << 0), |
| |
| }CMD3_BITS; |
| typedef enum { |
| |
| INTR = (1 << 31), |
| PCSINT = (1 << 28), |
| LCINT = (1 << 27), |
| APINT5 = (1 << 26), |
| APINT4 = (1 << 25), |
| APINT3 = (1 << 24), |
| TINT_SUM = (1 << 23), |
| APINT2 = (1 << 22), |
| APINT1 = (1 << 21), |
| APINT0 = (1 << 20), |
| MIIPDTINT = (1 << 19), |
| MCCINT = (1 << 17), |
| MREINT = (1 << 16), |
| RINT_SUM = (1 << 15), |
| SPNDINT = (1 << 14), |
| MPINT = (1 << 13), |
| SINT = (1 << 12), |
| TINT3 = (1 << 11), |
| TINT2 = (1 << 10), |
| TINT1 = (1 << 9), |
| TINT0 = (1 << 8), |
| UINT = (1 << 7), |
| STINT = (1 << 4), |
| RINT0 = (1 << 0), |
| |
| }INT0_BITS; |
| typedef enum { |
| |
| /* VAL3 */ |
| LCINTEN = (1 << 27), |
| APINT5EN = (1 << 26), |
| APINT4EN = (1 << 25), |
| APINT3EN = (1 << 24), |
| /* VAL2 */ |
| APINT2EN = (1 << 22), |
| APINT1EN = (1 << 21), |
| APINT0EN = (1 << 20), |
| MIIPDTINTEN = (1 << 19), |
| MCCIINTEN = (1 << 18), |
| MCCINTEN = (1 << 17), |
| MREINTEN = (1 << 16), |
| /* VAL1 */ |
| SPNDINTEN = (1 << 14), |
| MPINTEN = (1 << 13), |
| TINTEN3 = (1 << 11), |
| SINTEN = (1 << 12), |
| TINTEN2 = (1 << 10), |
| TINTEN1 = (1 << 9), |
| TINTEN0 = (1 << 8), |
| /* VAL0 */ |
| STINTEN = (1 << 4), |
| RINTEN0 = (1 << 0), |
| |
| INTEN0_CLEAR = 0x1F7F7F1F, /* Command style register */ |
| |
| }INTEN0_BITS; |
| |
| typedef enum { |
| |
| PMAT_DET = (1 << 12), |
| MP_DET = (1 << 11), |
| LC_DET = (1 << 10), |
| SPEED_MASK = (1 << 9)|(1 << 8)|(1 << 7), |
| FULL_DPLX = (1 << 6), |
| LINK_STATS = (1 << 5), |
| AUTONEG_COMPLETE = (1 << 4), |
| MIIPD = (1 << 3), |
| RX_SUSPENDED = (1 << 2), |
| TX_SUSPENDED = (1 << 1), |
| RUNNING = (1 << 0), |
| |
| }STAT0_BITS; |
| |
| #define PHY_SPEED_10 0x2 |
| #define PHY_SPEED_100 0x3 |
| |
| |
| int amd8111e_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs) |
| { |
| |
| u32 *reg_buff = (u32 *)regs->data; |
| u32 reg; |
| |
| fprintf(stdout, "Descriptor Registers\n"); |
| fprintf(stdout, "---------------------\n"); |
| |
| /* Transmit descriptor base address register */ |
| reg = reg_buff[0]; |
| fprintf(stdout, |
| "0x00100: Transmit descriptor base address register %08X\n",reg); |
| |
| /* Transmit descriptor length register */ |
| reg = reg_buff[1]; |
| fprintf(stdout, |
| "0x00140: Transmit descriptor length register 0x%08X\n",reg); |
| |
| /* Receive descriptor base address register */ |
| reg = reg_buff[2]; |
| fprintf(stdout, |
| "0x00120: Receive descriptor base address register %08X\n",reg); |
| |
| /* Receive descriptor length register */ |
| reg = reg_buff[3]; |
| fprintf(stdout, |
| "0x00150: Receive descriptor length register 0x%08X\n",reg); |
| |
| fprintf(stdout, "\n"); |
| |
| |
| fprintf(stdout, "Command Registers\n"); |
| fprintf(stdout, "-------------------\n"); |
| |
| /* Command 0 Register */ |
| reg = reg_buff[4]; |
| fprintf(stdout, |
| "0x00048: Command 0 register 0x%08X\n" |
| " Interrupts: %s\n" |
| " Device: %s\n", |
| reg, |
| reg & INTREN ? "Enabled" : "Disabled", |
| reg & RUN ? "Running" : "Stopped"); |
| |
| /* Command 2 Register */ |
| reg = reg_buff[5]; |
| fprintf(stdout, |
| "0x00050: Command 2 register 0x%08X\n" |
| " Promiscuous mode: %s\n" |
| " Retransmit on underflow: %s\n", |
| reg, |
| reg & PROM ? "Enabled" : "Disabled", |
| reg & REX_UFLO ? "Enabled" : "Disabled"); |
| /* Command 3 Register */ |
| reg = reg_buff[6]; |
| fprintf(stdout, |
| "0x00054: Command 3 register 0x%08X\n" |
| " Jumbo frame: %s\n" |
| " Admit only VLAN frame: %s\n" |
| " Delete VLAN tag: %s\n", |
| reg, |
| reg & JUMBO ? "Enabled" : "Disabled", |
| reg & VLONLY ? "Yes" : "No", |
| reg & VL_TAG_DEL ? "Yes" : "No"); |
| |
| /* Command 7 Register */ |
| reg = reg_buff[7]; |
| fprintf(stdout, |
| "0x00064: Command 7 register 0x%08X\n", |
| reg); |
| |
| fprintf(stdout, "\n"); |
| fprintf(stdout, "Interrupt Registers\n"); |
| fprintf(stdout, "-------------------\n"); |
| |
| /* Interrupt 0 Register */ |
| reg = reg_buff[8]; |
| fprintf(stdout, |
| "0x00038: Interrupt register 0x%08X\n" |
| " Any interrupt is set: %s\n" |
| " Link change interrupt: %s\n" |
| " Register 0 auto-poll interrupt: %s\n" |
| " Transmit interrupt: %s\n" |
| " Software timer interrupt: %s\n" |
| " Receive interrupt: %s\n", |
| reg, |
| reg & INTR ? "Yes" : "No", |
| reg & LCINT ? "Yes" : "No", |
| reg & APINT0 ? "Yes" : "No", |
| reg & TINT0 ? "Yes" : "No", |
| reg & STINT ? "Yes" : "No", |
| reg & RINT0 ? "Yes" : "No" |
| ); |
| /* Interrupt 0 enable Register */ |
| reg = reg_buff[9]; |
| fprintf(stdout, |
| "0x00040: Interrupt enable register 0x%08X\n" |
| " Link change interrupt: %s\n" |
| " Register 0 auto-poll interrupt: %s\n" |
| " Transmit interrupt: %s\n" |
| " Software timer interrupt: %s\n" |
| " Receive interrupt: %s\n", |
| reg, |
| reg & LCINTEN ? "Enabled" : "Disabled", |
| reg & APINT0EN ? "Enabled" : "Disabled", |
| reg & TINTEN0 ? "Enabled" : "Disabled", |
| reg & STINTEN ? "Enabled" : "Disabled", |
| reg & RINTEN0 ? "Enabled" : "Disabled" |
| ); |
| |
| fprintf(stdout, "\n"); |
| fprintf(stdout, "Logical Address Filter Register\n"); |
| fprintf(stdout, "-------------------\n"); |
| |
| /* Logical Address Filter Register */ |
| fprintf(stdout, |
| "0x00168: Logical address filter register 0x%08X%08X\n", |
| reg_buff[11],reg_buff[10]); |
| |
| fprintf(stdout, "\n"); |
| fprintf(stdout, "Link status Register\n"); |
| fprintf(stdout, "-------------------\n"); |
| |
| /* Status 0 Register */ |
| reg = reg_buff[12]; |
| if(reg & LINK_STATS){ |
| fprintf(stdout, |
| "0x00030: Link status register 0x%08X\n" |
| " Link status: %s\n" |
| " Auto negotiation complete %s\n" |
| " Duplex %s\n" |
| " Speed %s\n", |
| reg, |
| reg & LINK_STATS ? "Valid" : "Invalid", |
| reg & AUTONEG_COMPLETE ? "Yes" : "No", |
| reg & FULL_DPLX ? "Full" : "Half", |
| ((reg & SPEED_MASK) >> 7 == PHY_SPEED_10) ? "10Mbits/ Sec": |
| "100Mbits/Sec"); |
| |
| } |
| else{ |
| fprintf(stdout, |
| "0x00030: Link status register 0x%08X\n" |
| " Link status: %s\n", |
| reg, |
| reg & LINK_STATS ? "Valid" : "Invalid"); |
| } |
| return 0; |
| |
| } |