| /** |
| * f2fs_format.c |
| * |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com/ |
| * |
| * Dual licensed under the GPL or LGPL version 2 licenses. |
| */ |
| #define _LARGEFILE64_SOURCE |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <fcntl.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <sys/stat.h> |
| #include <sys/mount.h> |
| #include <time.h> |
| #include <uuid/uuid.h> |
| |
| #include "f2fs_fs.h" |
| #include "f2fs_format_utils.h" |
| |
| extern struct f2fs_configuration config; |
| struct f2fs_super_block sb; |
| struct f2fs_checkpoint *cp; |
| |
| /* Return first segment number of each area */ |
| #define prev_zone(cur) (config.cur_seg[cur] - config.segs_per_zone) |
| #define next_zone(cur) (config.cur_seg[cur] + config.segs_per_zone) |
| #define last_zone(cur) ((cur - 1) * config.segs_per_zone) |
| #define last_section(cur) (cur + (config.secs_per_zone - 1) * config.segs_per_sec) |
| |
| #define set_sb_le64(member, val) (sb.member = cpu_to_le64(val)) |
| #define set_sb_le32(member, val) (sb.member = cpu_to_le32(val)) |
| #define set_sb_le16(member, val) (sb.member = cpu_to_le16(val)) |
| #define get_sb_le64(member) le64_to_cpu(sb.member) |
| #define get_sb_le32(member) le32_to_cpu(sb.member) |
| #define get_sb_le16(member) le16_to_cpu(sb.member) |
| |
| #define set_sb(member, val) \ |
| do { \ |
| typeof(sb.member) t; \ |
| switch (sizeof(t)) { \ |
| case 8: set_sb_le64(member, val); break; \ |
| case 4: set_sb_le32(member, val); break; \ |
| case 2: set_sb_le16(member, val); break; \ |
| } \ |
| } while(0) |
| |
| #define get_sb(member) \ |
| ({ \ |
| typeof(sb.member) t; \ |
| switch (sizeof(t)) { \ |
| case 8: t = get_sb_le64(member); break; \ |
| case 4: t = get_sb_le32(member); break; \ |
| case 2: t = get_sb_le16(member); break; \ |
| } \ |
| t; \ |
| }) |
| |
| #define set_cp_le64(member, val) (cp->member = cpu_to_le64(val)) |
| #define set_cp_le32(member, val) (cp->member = cpu_to_le32(val)) |
| #define set_cp_le16(member, val) (cp->member = cpu_to_le16(val)) |
| #define get_cp_le64(member) le64_to_cpu(cp->member) |
| #define get_cp_le32(member) le32_to_cpu(cp->member) |
| #define get_cp_le16(member) le16_to_cpu(cp->member) |
| |
| #define set_cp(member, val) \ |
| do { \ |
| typeof(cp->member) t; \ |
| switch (sizeof(t)) { \ |
| case 8: set_cp_le64(member, val); break; \ |
| case 4: set_cp_le32(member, val); break; \ |
| case 2: set_cp_le16(member, val); break; \ |
| } \ |
| } while(0) |
| |
| #define get_cp(member) \ |
| ({ \ |
| typeof(cp->member) t; \ |
| switch (sizeof(t)) { \ |
| case 8: t = get_cp_le64(member); break; \ |
| case 4: t = get_cp_le32(member); break; \ |
| case 2: t = get_cp_le16(member); break; \ |
| } \ |
| t; \ |
| }) |
| |
| |
| const char *media_ext_lists[] = { |
| "jpg", |
| "gif", |
| "png", |
| "avi", |
| "divx", |
| "mp4", |
| "mp3", |
| "3gp", |
| "wmv", |
| "wma", |
| "mpeg", |
| "mkv", |
| "mov", |
| "asx", |
| "asf", |
| "wmx", |
| "svi", |
| "wvx", |
| "wm", |
| "mpg", |
| "mpe", |
| "rm", |
| "ogg", |
| "jpeg", |
| "video", |
| "apk", /* for android system */ |
| NULL |
| }; |
| |
| static void configure_extension_list(void) |
| { |
| const char **extlist = media_ext_lists; |
| char *ext_str = config.extension_list; |
| char *ue; |
| int name_len; |
| int i = 0; |
| |
| sb.extension_count = 0; |
| memset(sb.extension_list, 0, |
| sizeof(sb.extension_list)); |
| |
| while (*extlist) { |
| name_len = strlen(*extlist); |
| memcpy(sb.extension_list[i++], *extlist, name_len); |
| extlist++; |
| } |
| set_sb(extension_count, i); |
| |
| if (!ext_str) |
| return; |
| |
| /* add user ext list */ |
| ue = strtok(ext_str, ","); |
| while (ue != NULL) { |
| name_len = strlen(ue); |
| memcpy(sb.extension_list[i++], ue, name_len); |
| ue = strtok(NULL, ","); |
| if (i >= F2FS_MAX_EXTENSION) |
| break; |
| } |
| |
| set_sb(extension_count, i); |
| |
| free(config.extension_list); |
| } |
| |
| static u_int32_t get_best_overprovision(void) |
| { |
| u_int32_t reserved, ovp, candidate, end, diff, space; |
| u_int32_t max_ovp = 0, max_space = 0; |
| |
| if (get_sb(segment_count_main) < 256) { |
| candidate = 10; |
| end = 95; |
| diff = 5; |
| } else { |
| candidate = 1; |
| end = 10; |
| diff = 1; |
| } |
| |
| for (; candidate <= end; candidate += diff) { |
| reserved = (2 * (100 / candidate + 1) + 6) * |
| get_sb(segs_per_sec); |
| ovp = (get_sb(segment_count_main) - reserved) * candidate / 100; |
| space = get_sb(segment_count_main) - reserved - ovp; |
| if (max_space < space) { |
| max_space = space; |
| max_ovp = candidate; |
| } |
| } |
| return max_ovp; |
| } |
| |
| static int f2fs_prepare_super_block(void) |
| { |
| u_int32_t blk_size_bytes; |
| u_int32_t log_sectorsize, log_sectors_per_block; |
| u_int32_t log_blocksize, log_blks_per_seg; |
| u_int32_t segment_size_bytes, zone_size_bytes; |
| u_int32_t sit_segments; |
| u_int32_t blocks_for_sit, blocks_for_nat, blocks_for_ssa; |
| u_int32_t total_valid_blks_available; |
| u_int64_t zone_align_start_offset, diff, total_meta_segments; |
| u_int32_t sit_bitmap_size, max_sit_bitmap_size; |
| u_int32_t max_nat_bitmap_size, max_nat_segments; |
| u_int32_t total_zones; |
| |
| set_sb(magic, F2FS_SUPER_MAGIC); |
| set_sb(major_ver, F2FS_MAJOR_VERSION); |
| set_sb(minor_ver, F2FS_MINOR_VERSION); |
| |
| log_sectorsize = log_base_2(config.sector_size); |
| log_sectors_per_block = log_base_2(config.sectors_per_blk); |
| log_blocksize = log_sectorsize + log_sectors_per_block; |
| log_blks_per_seg = log_base_2(config.blks_per_seg); |
| |
| set_sb(log_sectorsize, log_sectorsize); |
| set_sb(log_sectors_per_block, log_sectors_per_block); |
| |
| set_sb(log_blocksize, log_blocksize); |
| set_sb(log_blocks_per_seg, log_blks_per_seg); |
| |
| set_sb(segs_per_sec, config.segs_per_sec); |
| set_sb(secs_per_zone, config.secs_per_zone); |
| |
| blk_size_bytes = 1 << log_blocksize; |
| segment_size_bytes = blk_size_bytes * config.blks_per_seg; |
| zone_size_bytes = |
| blk_size_bytes * config.secs_per_zone * |
| config.segs_per_sec * config.blks_per_seg; |
| |
| sb.checksum_offset = 0; |
| |
| set_sb(block_count, config.total_sectors >> log_sectors_per_block); |
| |
| zone_align_start_offset = |
| (config.start_sector * config.sector_size + |
| 2 * F2FS_BLKSIZE + zone_size_bytes - 1) / |
| zone_size_bytes * zone_size_bytes - |
| config.start_sector * config.sector_size; |
| |
| if (config.start_sector % config.sectors_per_blk) { |
| MSG(1, "\tWARN: Align start sector number to the page unit\n"); |
| MSG(1, "\ti.e., start sector: %d, ofs:%d (sects/page: %d)\n", |
| config.start_sector, |
| config.start_sector % config.sectors_per_blk, |
| config.sectors_per_blk); |
| } |
| |
| set_sb(segment_count, (config.total_sectors * config.sector_size - |
| zone_align_start_offset) / segment_size_bytes); |
| |
| set_sb(segment0_blkaddr, zone_align_start_offset / blk_size_bytes); |
| sb.cp_blkaddr = sb.segment0_blkaddr; |
| |
| MSG(0, "Info: zone aligned segment0 blkaddr: %u\n", get_sb(segment0_blkaddr)); |
| |
| set_sb(segment_count_ckpt, F2FS_NUMBER_OF_CHECKPOINT_PACK); |
| |
| set_sb(sit_blkaddr, get_sb(segment0_blkaddr) + get_sb(segment_count_ckpt) * |
| config.blks_per_seg); |
| |
| blocks_for_sit = ALIGN(get_sb(segment_count), SIT_ENTRY_PER_BLOCK); |
| |
| sit_segments = SEG_ALIGN(blocks_for_sit); |
| |
| set_sb(segment_count_sit, sit_segments * 2); |
| |
| set_sb(nat_blkaddr, get_sb(sit_blkaddr) + get_sb(segment_count_sit) * |
| config.blks_per_seg); |
| |
| total_valid_blks_available = (get_sb(segment_count) - |
| (get_sb(segment_count_ckpt) + get_sb(segment_count_sit))) * |
| config.blks_per_seg; |
| |
| blocks_for_nat = ALIGN(total_valid_blks_available, NAT_ENTRY_PER_BLOCK); |
| |
| set_sb(segment_count_nat, SEG_ALIGN(blocks_for_nat)); |
| /* |
| * The number of node segments should not be exceeded a "Threshold". |
| * This number resizes NAT bitmap area in a CP page. |
| * So the threshold is determined not to overflow one CP page |
| */ |
| sit_bitmap_size = ((get_sb(segment_count_sit) / 2) << |
| log_blks_per_seg) / 8; |
| |
| if (sit_bitmap_size > MAX_SIT_BITMAP_SIZE) |
| max_sit_bitmap_size = MAX_SIT_BITMAP_SIZE; |
| else |
| max_sit_bitmap_size = sit_bitmap_size; |
| |
| /* |
| * It should be reserved minimum 1 segment for nat. |
| * When sit is too large, we should expand cp area. It requires more pages for cp. |
| */ |
| if (max_sit_bitmap_size > |
| (CHECKSUM_OFFSET - sizeof(struct f2fs_checkpoint) + 65)) { |
| max_nat_bitmap_size = CHECKSUM_OFFSET - sizeof(struct f2fs_checkpoint) + 1; |
| set_sb(cp_payload, F2FS_BLK_ALIGN(max_sit_bitmap_size)); |
| } else { |
| max_nat_bitmap_size = CHECKSUM_OFFSET - sizeof(struct f2fs_checkpoint) + 1 |
| - max_sit_bitmap_size; |
| sb.cp_payload = 0; |
| } |
| |
| max_nat_segments = (max_nat_bitmap_size * 8) >> log_blks_per_seg; |
| |
| if (get_sb(segment_count_nat) > max_nat_segments) |
| set_sb(segment_count_nat, max_nat_segments); |
| |
| set_sb(segment_count_nat, get_sb(segment_count_nat) * 2); |
| |
| set_sb(ssa_blkaddr, get_sb(nat_blkaddr) + get_sb(segment_count_nat) * |
| config.blks_per_seg); |
| |
| total_valid_blks_available = (get_sb(segment_count) - |
| (get_sb(segment_count_ckpt) + |
| get_sb(segment_count_sit) + |
| get_sb(segment_count_nat))) * |
| config.blks_per_seg; |
| |
| blocks_for_ssa = total_valid_blks_available / |
| config.blks_per_seg + 1; |
| |
| set_sb(segment_count_ssa, SEG_ALIGN(blocks_for_ssa)); |
| |
| total_meta_segments = get_sb(segment_count_ckpt) + |
| get_sb(segment_count_sit) + |
| get_sb(segment_count_nat) + |
| get_sb(segment_count_ssa); |
| diff = total_meta_segments % (config.segs_per_zone); |
| if (diff) |
| set_sb(segment_count_ssa, get_sb(segment_count_ssa) + |
| (config.segs_per_zone - diff)); |
| |
| set_sb(main_blkaddr, get_sb(ssa_blkaddr) + get_sb(segment_count_ssa) * |
| config.blks_per_seg); |
| |
| set_sb(segment_count_main, get_sb(segment_count) - |
| (get_sb(segment_count_ckpt) + |
| get_sb(segment_count_sit) + |
| get_sb(segment_count_nat) + |
| get_sb(segment_count_ssa))); |
| |
| set_sb(section_count, get_sb(segment_count_main) / config.segs_per_sec); |
| |
| set_sb(segment_count_main, get_sb(section_count) * config.segs_per_sec); |
| |
| /* Let's determine the best reserved and overprovisioned space */ |
| if (config.overprovision == 0) |
| config.overprovision = get_best_overprovision(); |
| |
| config.reserved_segments = |
| (2 * (100 / config.overprovision + 1) + 6) |
| * config.segs_per_sec; |
| |
| if ((get_sb(segment_count_main) - 2) < |
| config.reserved_segments) { |
| MSG(1, "\tError: Device size is not sufficient for F2FS volume,\ |
| more segment needed =%u", |
| config.reserved_segments - |
| (get_sb(segment_count_main) - 2)); |
| return -1; |
| } |
| |
| uuid_generate(sb.uuid); |
| |
| ASCIIToUNICODE(sb.volume_name, (u_int8_t *)config.vol_label); |
| |
| set_sb(node_ino, 1); |
| set_sb(meta_ino, 2); |
| set_sb(root_ino, 3); |
| |
| total_zones = get_sb(segment_count_main) / (config.segs_per_zone); |
| if (total_zones <= 6) { |
| MSG(1, "\tError: %d zones: Need more zones \ |
| by shrinking zone size\n", total_zones); |
| return -1; |
| } |
| |
| if (config.heap) { |
| config.cur_seg[CURSEG_HOT_NODE] = last_section(last_zone(total_zones)); |
| config.cur_seg[CURSEG_WARM_NODE] = prev_zone(CURSEG_HOT_NODE); |
| config.cur_seg[CURSEG_COLD_NODE] = prev_zone(CURSEG_WARM_NODE); |
| config.cur_seg[CURSEG_HOT_DATA] = prev_zone(CURSEG_COLD_NODE); |
| config.cur_seg[CURSEG_COLD_DATA] = 0; |
| config.cur_seg[CURSEG_WARM_DATA] = next_zone(CURSEG_COLD_DATA); |
| } else { |
| config.cur_seg[CURSEG_HOT_NODE] = 0; |
| config.cur_seg[CURSEG_WARM_NODE] = next_zone(CURSEG_HOT_NODE); |
| config.cur_seg[CURSEG_COLD_NODE] = next_zone(CURSEG_WARM_NODE); |
| config.cur_seg[CURSEG_HOT_DATA] = next_zone(CURSEG_COLD_NODE); |
| config.cur_seg[CURSEG_COLD_DATA] = next_zone(CURSEG_HOT_DATA); |
| config.cur_seg[CURSEG_WARM_DATA] = next_zone(CURSEG_COLD_DATA); |
| } |
| |
| configure_extension_list(); |
| |
| /* get kernel version */ |
| if (config.kd >= 0) { |
| dev_read_version(config.version, 0, VERSION_LEN); |
| get_kernel_version(config.version); |
| MSG(0, "Info: format version with\n \"%s\"\n", config.version); |
| } else { |
| memset(config.version, 0, VERSION_LEN); |
| } |
| |
| memcpy(sb.version, config.version, VERSION_LEN); |
| memcpy(sb.init_version, config.version, VERSION_LEN); |
| |
| sb.feature = config.feature; |
| |
| return 0; |
| } |
| |
| static int f2fs_init_sit_area(void) |
| { |
| u_int32_t blk_size, seg_size; |
| u_int32_t index = 0; |
| u_int64_t sit_seg_addr = 0; |
| u_int8_t *zero_buf = NULL; |
| |
| blk_size = 1 << get_sb(log_blocksize); |
| seg_size = (1 << get_sb(log_blocks_per_seg)) * blk_size; |
| |
| zero_buf = calloc(sizeof(u_int8_t), seg_size); |
| if(zero_buf == NULL) { |
| MSG(1, "\tError: Calloc Failed for sit_zero_buf!!!\n"); |
| return -1; |
| } |
| |
| sit_seg_addr = get_sb(sit_blkaddr); |
| sit_seg_addr *= blk_size; |
| |
| DBG(1, "\tFilling sit area at offset 0x%08"PRIx64"\n", sit_seg_addr); |
| for (index = 0; index < (get_sb(segment_count_sit) / 2); index++) { |
| if (dev_fill(zero_buf, sit_seg_addr, seg_size)) { |
| MSG(1, "\tError: While zeroing out the sit area \ |
| on disk!!!\n"); |
| free(zero_buf); |
| return -1; |
| } |
| sit_seg_addr += seg_size; |
| } |
| |
| free(zero_buf); |
| return 0 ; |
| } |
| |
| static int f2fs_init_nat_area(void) |
| { |
| u_int32_t blk_size, seg_size; |
| u_int32_t index = 0; |
| u_int64_t nat_seg_addr = 0; |
| u_int8_t *nat_buf = NULL; |
| |
| blk_size = 1 << get_sb(log_blocksize); |
| seg_size = (1 << get_sb(log_blocks_per_seg)) * blk_size; |
| |
| nat_buf = calloc(sizeof(u_int8_t), seg_size); |
| if (nat_buf == NULL) { |
| MSG(1, "\tError: Calloc Failed for nat_zero_blk!!!\n"); |
| return -1; |
| } |
| |
| nat_seg_addr = get_sb(nat_blkaddr); |
| nat_seg_addr *= blk_size; |
| |
| DBG(1, "\tFilling nat area at offset 0x%08"PRIx64"\n", nat_seg_addr); |
| for (index = 0; index < get_sb(segment_count_nat) / 2; index++) { |
| if (dev_fill(nat_buf, nat_seg_addr, seg_size)) { |
| MSG(1, "\tError: While zeroing out the nat area \ |
| on disk!!!\n"); |
| free(nat_buf); |
| return -1; |
| } |
| nat_seg_addr = nat_seg_addr + (2 * seg_size); |
| } |
| |
| free(nat_buf); |
| return 0 ; |
| } |
| |
| static int f2fs_write_check_point_pack(void) |
| { |
| struct f2fs_summary_block *sum = NULL; |
| u_int32_t blk_size_bytes; |
| u_int64_t cp_seg_blk_offset = 0; |
| u_int32_t crc = 0; |
| unsigned int i; |
| char *cp_payload = NULL; |
| char *sum_compact, *sum_compact_p; |
| struct f2fs_summary *sum_entry; |
| int ret = -1; |
| |
| cp = calloc(F2FS_BLKSIZE, 1); |
| if (cp == NULL) { |
| MSG(1, "\tError: Calloc Failed for f2fs_checkpoint!!!\n"); |
| return ret; |
| } |
| |
| sum = calloc(F2FS_BLKSIZE, 1); |
| if (sum == NULL) { |
| MSG(1, "\tError: Calloc Failed for summay_node!!!\n"); |
| goto free_cp; |
| } |
| |
| sum_compact = calloc(F2FS_BLKSIZE, 1); |
| if (sum == NULL) { |
| MSG(1, "\tError: Calloc Failed for summay buffer!!!\n"); |
| goto free_sum; |
| } |
| sum_compact_p = sum_compact; |
| |
| cp_payload = calloc(F2FS_BLKSIZE, 1); |
| if (cp_payload == NULL) { |
| MSG(1, "\tError: Calloc Failed for cp_payload!!!\n"); |
| goto free_sum_compact; |
| } |
| |
| /* 1. cp page 1 of checkpoint pack 1 */ |
| set_cp(checkpoint_ver, 1); |
| set_cp(cur_node_segno[0], config.cur_seg[CURSEG_HOT_NODE]); |
| set_cp(cur_node_segno[1], config.cur_seg[CURSEG_WARM_NODE]); |
| set_cp(cur_node_segno[2], config.cur_seg[CURSEG_COLD_NODE]); |
| set_cp(cur_data_segno[0], config.cur_seg[CURSEG_HOT_DATA]); |
| set_cp(cur_data_segno[1], config.cur_seg[CURSEG_WARM_DATA]); |
| set_cp(cur_data_segno[2], config.cur_seg[CURSEG_COLD_DATA]); |
| for (i = 3; i < MAX_ACTIVE_NODE_LOGS; i++) { |
| set_cp(cur_node_segno[i], 0xffffffff); |
| set_cp(cur_data_segno[i], 0xffffffff); |
| } |
| |
| set_cp(cur_node_blkoff[0], 1); |
| set_cp(cur_data_blkoff[0], 1); |
| set_cp(valid_block_count, 2); |
| set_cp(rsvd_segment_count, config.reserved_segments); |
| set_cp(overprov_segment_count, (get_sb(segment_count_main) - |
| get_cp(rsvd_segment_count)) * |
| config.overprovision / 100); |
| set_cp(overprov_segment_count, get_cp(overprov_segment_count) + |
| get_cp(rsvd_segment_count)); |
| |
| MSG(0, "Info: Overprovision ratio = %u%%\n", config.overprovision); |
| MSG(0, "Info: Overprovision segments = %u (GC reserved = %u)\n", |
| get_cp(overprov_segment_count), |
| config.reserved_segments); |
| |
| /* main segments - reserved segments - (node + data segments) */ |
| set_cp(free_segment_count, get_sb(segment_count_main) - 6); |
| set_cp(user_block_count, ((get_cp(free_segment_count) + 6 - |
| get_cp(overprov_segment_count)) * config.blks_per_seg)); |
| /* cp page (2), data summaries (1), node summaries (3) */ |
| set_cp(cp_pack_total_block_count, 6 + get_sb(cp_payload)); |
| set_cp(ckpt_flags, CP_UMOUNT_FLAG | CP_COMPACT_SUM_FLAG); |
| set_cp(cp_pack_start_sum, 1 + get_sb(cp_payload)); |
| set_cp(valid_node_count, 1); |
| set_cp(valid_inode_count, 1); |
| set_cp(next_free_nid, get_sb(root_ino) + 1); |
| set_cp(sit_ver_bitmap_bytesize, ((get_sb(segment_count_sit) / 2) << |
| get_sb(log_blocks_per_seg)) / 8); |
| |
| set_cp(nat_ver_bitmap_bytesize, ((get_sb(segment_count_nat) / 2) << |
| get_sb(log_blocks_per_seg)) / 8); |
| |
| set_cp(checksum_offset, CHECKSUM_OFFSET); |
| |
| crc = f2fs_cal_crc32(F2FS_SUPER_MAGIC, cp, CHECKSUM_OFFSET); |
| *((__le32 *)((unsigned char *)cp + CHECKSUM_OFFSET)) = |
| cpu_to_le32(crc); |
| |
| blk_size_bytes = 1 << get_sb(log_blocksize); |
| cp_seg_blk_offset = get_sb(segment0_blkaddr); |
| cp_seg_blk_offset *= blk_size_bytes; |
| |
| DBG(1, "\tWriting main segments, cp at offset 0x%08"PRIx64"\n", cp_seg_blk_offset); |
| if (dev_write(cp, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the cp to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| for (i = 0; i < get_sb(cp_payload); i++) { |
| cp_seg_blk_offset += blk_size_bytes; |
| if (dev_fill(cp_payload, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While zeroing out the sit bitmap area \ |
| on disk!!!\n"); |
| goto free_cp_payload; |
| } |
| } |
| |
| /* Prepare and write Segment summary for HOT/WARM/COLD DATA |
| * |
| * The structure of compact summary |
| * +-------------------+ |
| * | nat_journal | |
| * +-------------------+ |
| * | sit_journal | |
| * +-------------------+ |
| * | hot data summary | |
| * +-------------------+ |
| * | warm data summary | |
| * +-------------------+ |
| * | cold data summary | |
| * +-------------------+ |
| */ |
| memset(sum, 0, sizeof(struct f2fs_summary_block)); |
| SET_SUM_TYPE((&sum->footer), SUM_TYPE_DATA); |
| |
| sum->n_nats = cpu_to_le16(1); |
| sum->nat_j.entries[0].nid = sb.root_ino; |
| sum->nat_j.entries[0].ne.version = 0; |
| sum->nat_j.entries[0].ne.ino = sb.root_ino; |
| sum->nat_j.entries[0].ne.block_addr = cpu_to_le32( |
| get_sb(main_blkaddr) + |
| get_cp(cur_node_segno[0]) * config.blks_per_seg); |
| |
| memcpy(sum_compact_p, &sum->n_nats, SUM_JOURNAL_SIZE); |
| sum_compact_p += SUM_JOURNAL_SIZE; |
| |
| memset(sum, 0, sizeof(struct f2fs_summary_block)); |
| /* inode sit for root */ |
| sum->n_sits = cpu_to_le16(6); |
| sum->sit_j.entries[0].segno = cp->cur_node_segno[0]; |
| sum->sit_j.entries[0].se.vblocks = cpu_to_le16((CURSEG_HOT_NODE << 10) | 1); |
| f2fs_set_bit(0, (char *)sum->sit_j.entries[0].se.valid_map); |
| sum->sit_j.entries[1].segno = cp->cur_node_segno[1]; |
| sum->sit_j.entries[1].se.vblocks = cpu_to_le16((CURSEG_WARM_NODE << 10)); |
| sum->sit_j.entries[2].segno = cp->cur_node_segno[2]; |
| sum->sit_j.entries[2].se.vblocks = cpu_to_le16((CURSEG_COLD_NODE << 10)); |
| |
| /* data sit for root */ |
| sum->sit_j.entries[3].segno = cp->cur_data_segno[0]; |
| sum->sit_j.entries[3].se.vblocks = cpu_to_le16((CURSEG_HOT_DATA << 10) | 1); |
| f2fs_set_bit(0, (char *)sum->sit_j.entries[3].se.valid_map); |
| sum->sit_j.entries[4].segno = cp->cur_data_segno[1]; |
| sum->sit_j.entries[4].se.vblocks = cpu_to_le16((CURSEG_WARM_DATA << 10)); |
| sum->sit_j.entries[5].segno = cp->cur_data_segno[2]; |
| sum->sit_j.entries[5].se.vblocks = cpu_to_le16((CURSEG_COLD_DATA << 10)); |
| |
| memcpy(sum_compact_p, &sum->n_sits, SUM_JOURNAL_SIZE); |
| sum_compact_p += SUM_JOURNAL_SIZE; |
| |
| /* hot data summary */ |
| sum_entry = (struct f2fs_summary *)sum_compact_p; |
| sum_entry->nid = sb.root_ino; |
| sum_entry->ofs_in_node = 0; |
| /* warm data summary, nothing to do */ |
| /* cold data summary, nothing to do */ |
| |
| cp_seg_blk_offset += blk_size_bytes; |
| DBG(1, "\tWriting Segment summary for HOT/WARM/COLD_DATA, at offset 0x%08"PRIx64"\n", |
| cp_seg_blk_offset); |
| if (dev_write(sum_compact, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the sum_blk to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| /* Prepare and write Segment summary for HOT_NODE */ |
| memset(sum, 0, sizeof(struct f2fs_summary_block)); |
| SET_SUM_TYPE((&sum->footer), SUM_TYPE_NODE); |
| |
| sum->entries[0].nid = sb.root_ino; |
| sum->entries[0].ofs_in_node = 0; |
| |
| cp_seg_blk_offset += blk_size_bytes; |
| DBG(1, "\tWriting Segment summary for HOT_NODE, at offset 0x%08"PRIx64"\n", |
| cp_seg_blk_offset); |
| if (dev_write(sum, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the sum_blk to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| /* Fill segment summary for WARM_NODE to zero. */ |
| memset(sum, 0, sizeof(struct f2fs_summary_block)); |
| SET_SUM_TYPE((&sum->footer), SUM_TYPE_NODE); |
| |
| cp_seg_blk_offset += blk_size_bytes; |
| DBG(1, "\tWriting Segment summary for WARM_NODE, at offset 0x%08"PRIx64"\n", |
| cp_seg_blk_offset); |
| if (dev_write(sum, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the sum_blk to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| /* Fill segment summary for COLD_NODE to zero. */ |
| memset(sum, 0, sizeof(struct f2fs_summary_block)); |
| SET_SUM_TYPE((&sum->footer), SUM_TYPE_NODE); |
| cp_seg_blk_offset += blk_size_bytes; |
| DBG(1, "\tWriting Segment summary for COLD_NODE, at offset 0x%08"PRIx64"\n", |
| cp_seg_blk_offset); |
| if (dev_write(sum, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the sum_blk to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| /* cp page2 */ |
| cp_seg_blk_offset += blk_size_bytes; |
| DBG(1, "\tWriting cp page2, at offset 0x%08"PRIx64"\n", cp_seg_blk_offset); |
| if (dev_write(cp, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the cp to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| /* cp page 1 of check point pack 2 |
| * Initiatialize other checkpoint pack with version zero |
| */ |
| cp->checkpoint_ver = 0; |
| |
| crc = f2fs_cal_crc32(F2FS_SUPER_MAGIC, cp, CHECKSUM_OFFSET); |
| *((__le32 *)((unsigned char *)cp + CHECKSUM_OFFSET)) = |
| cpu_to_le32(crc); |
| cp_seg_blk_offset = (get_sb(segment0_blkaddr) + |
| config.blks_per_seg) * |
| blk_size_bytes; |
| DBG(1, "\tWriting cp page 1 of checkpoint pack 2, at offset 0x%08"PRIx64"\n", cp_seg_blk_offset); |
| if (dev_write(cp, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the cp to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| for (i = 0; i < get_sb(cp_payload); i++) { |
| cp_seg_blk_offset += blk_size_bytes; |
| if (dev_fill(cp_payload, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While zeroing out the sit bitmap area \ |
| on disk!!!\n"); |
| goto free_cp_payload; |
| } |
| } |
| |
| /* cp page 2 of check point pack 2 */ |
| cp_seg_blk_offset += blk_size_bytes * (le32_to_cpu(cp->cp_pack_total_block_count) |
| - get_sb(cp_payload) - 1); |
| DBG(1, "\tWriting cp page 2 of checkpoint pack 2, at offset 0x%08"PRIx64"\n", cp_seg_blk_offset); |
| if (dev_write(cp, cp_seg_blk_offset, blk_size_bytes)) { |
| MSG(1, "\tError: While writing the cp to disk!!!\n"); |
| goto free_cp_payload; |
| } |
| |
| ret = 0; |
| |
| free_cp_payload: |
| free(cp_payload); |
| free_sum_compact: |
| free(sum_compact); |
| free_sum: |
| free(sum); |
| free_cp: |
| free(cp); |
| return ret; |
| } |
| |
| static int f2fs_write_super_block(void) |
| { |
| int index; |
| u_int8_t *zero_buff; |
| |
| zero_buff = calloc(F2FS_BLKSIZE, 1); |
| |
| memcpy(zero_buff + F2FS_SUPER_OFFSET, &sb, |
| sizeof(sb)); |
| DBG(1, "\tWriting super block, at offset 0x%08x\n", 0); |
| for (index = 0; index < 2; index++) { |
| if (dev_write(zero_buff, index * F2FS_BLKSIZE, F2FS_BLKSIZE)) { |
| MSG(1, "\tError: While while writing supe_blk \ |
| on disk!!! index : %d\n", index); |
| free(zero_buff); |
| return -1; |
| } |
| } |
| |
| free(zero_buff); |
| return 0; |
| } |
| |
| static int f2fs_write_root_inode(void) |
| { |
| struct f2fs_node *raw_node = NULL; |
| u_int64_t blk_size_bytes, data_blk_nor; |
| u_int64_t main_area_node_seg_blk_offset = 0; |
| |
| raw_node = calloc(F2FS_BLKSIZE, 1); |
| if (raw_node == NULL) { |
| MSG(1, "\tError: Calloc Failed for raw_node!!!\n"); |
| return -1; |
| } |
| |
| raw_node->footer.nid = sb.root_ino; |
| raw_node->footer.ino = sb.root_ino; |
| raw_node->footer.cp_ver = cpu_to_le64(1); |
| raw_node->footer.next_blkaddr = cpu_to_le32( |
| get_sb(main_blkaddr) + |
| config.cur_seg[CURSEG_HOT_NODE] * |
| config.blks_per_seg + 1); |
| |
| raw_node->i.i_mode = cpu_to_le16(0x41ed); |
| raw_node->i.i_links = cpu_to_le32(2); |
| raw_node->i.i_uid = cpu_to_le32(getuid()); |
| raw_node->i.i_gid = cpu_to_le32(getgid()); |
| |
| blk_size_bytes = 1 << get_sb(log_blocksize); |
| raw_node->i.i_size = cpu_to_le64(1 * blk_size_bytes); /* dentry */ |
| raw_node->i.i_blocks = cpu_to_le64(2); |
| |
| raw_node->i.i_atime = cpu_to_le32(time(NULL)); |
| raw_node->i.i_atime_nsec = 0; |
| raw_node->i.i_ctime = cpu_to_le32(time(NULL)); |
| raw_node->i.i_ctime_nsec = 0; |
| raw_node->i.i_mtime = cpu_to_le32(time(NULL)); |
| raw_node->i.i_mtime_nsec = 0; |
| raw_node->i.i_generation = 0; |
| raw_node->i.i_xattr_nid = 0; |
| raw_node->i.i_flags = 0; |
| raw_node->i.i_current_depth = cpu_to_le32(1); |
| raw_node->i.i_dir_level = DEF_DIR_LEVEL; |
| |
| data_blk_nor = get_sb(main_blkaddr) + |
| config.cur_seg[CURSEG_HOT_DATA] * config.blks_per_seg; |
| raw_node->i.i_addr[0] = cpu_to_le32(data_blk_nor); |
| |
| raw_node->i.i_ext.fofs = 0; |
| raw_node->i.i_ext.blk_addr = cpu_to_le32(data_blk_nor); |
| raw_node->i.i_ext.len = cpu_to_le32(1); |
| |
| main_area_node_seg_blk_offset = get_sb(main_blkaddr); |
| main_area_node_seg_blk_offset += config.cur_seg[CURSEG_HOT_NODE] * |
| config.blks_per_seg; |
| main_area_node_seg_blk_offset *= blk_size_bytes; |
| |
| DBG(1, "\tWriting root inode (hot node), at offset 0x%08"PRIx64"\n", main_area_node_seg_blk_offset); |
| if (dev_write(raw_node, main_area_node_seg_blk_offset, F2FS_BLKSIZE)) { |
| MSG(1, "\tError: While writing the raw_node to disk!!!\n"); |
| free(raw_node); |
| return -1; |
| } |
| |
| memset(raw_node, 0xff, sizeof(struct f2fs_node)); |
| |
| /* avoid power-off-recovery based on roll-forward policy */ |
| main_area_node_seg_blk_offset = get_sb(main_blkaddr); |
| main_area_node_seg_blk_offset += config.cur_seg[CURSEG_WARM_NODE] * |
| config.blks_per_seg; |
| main_area_node_seg_blk_offset *= blk_size_bytes; |
| |
| DBG(1, "\tWriting root inode (warm node), at offset 0x%08"PRIx64"\n", main_area_node_seg_blk_offset); |
| if (dev_write(raw_node, main_area_node_seg_blk_offset, F2FS_BLKSIZE)) { |
| MSG(1, "\tError: While writing the raw_node to disk!!!\n"); |
| free(raw_node); |
| return -1; |
| } |
| free(raw_node); |
| return 0; |
| } |
| |
| static int f2fs_update_nat_root(void) |
| { |
| struct f2fs_nat_block *nat_blk = NULL; |
| u_int64_t blk_size_bytes, nat_seg_blk_offset = 0; |
| |
| nat_blk = calloc(F2FS_BLKSIZE, 1); |
| if(nat_blk == NULL) { |
| MSG(1, "\tError: Calloc Failed for nat_blk!!!\n"); |
| return -1; |
| } |
| |
| /* update root */ |
| nat_blk->entries[get_sb(root_ino)].block_addr = cpu_to_le32( |
| get_sb(main_blkaddr) + |
| config.cur_seg[CURSEG_HOT_NODE] * config.blks_per_seg); |
| nat_blk->entries[get_sb(root_ino)].ino = sb.root_ino; |
| |
| /* update node nat */ |
| nat_blk->entries[get_sb(node_ino)].block_addr = cpu_to_le32(1); |
| nat_blk->entries[get_sb(node_ino)].ino = sb.node_ino; |
| |
| /* update meta nat */ |
| nat_blk->entries[get_sb(meta_ino)].block_addr = cpu_to_le32(1); |
| nat_blk->entries[get_sb(meta_ino)].ino = sb.meta_ino; |
| |
| blk_size_bytes = 1 << get_sb(log_blocksize); |
| nat_seg_blk_offset = get_sb(nat_blkaddr); |
| nat_seg_blk_offset *= blk_size_bytes; |
| |
| DBG(1, "\tWriting nat root, at offset 0x%08"PRIx64"\n", nat_seg_blk_offset); |
| if (dev_write(nat_blk, nat_seg_blk_offset, F2FS_BLKSIZE)) { |
| MSG(1, "\tError: While writing the nat_blk set0 to disk!\n"); |
| free(nat_blk); |
| return -1; |
| } |
| |
| free(nat_blk); |
| return 0; |
| } |
| |
| static int f2fs_add_default_dentry_root(void) |
| { |
| struct f2fs_dentry_block *dent_blk = NULL; |
| u_int64_t blk_size_bytes, data_blk_offset = 0; |
| |
| dent_blk = calloc(F2FS_BLKSIZE, 1); |
| if(dent_blk == NULL) { |
| MSG(1, "\tError: Calloc Failed for dent_blk!!!\n"); |
| return -1; |
| } |
| |
| dent_blk->dentry[0].hash_code = 0; |
| dent_blk->dentry[0].ino = sb.root_ino; |
| dent_blk->dentry[0].name_len = cpu_to_le16(1); |
| dent_blk->dentry[0].file_type = F2FS_FT_DIR; |
| memcpy(dent_blk->filename[0], ".", 1); |
| |
| dent_blk->dentry[1].hash_code = 0; |
| dent_blk->dentry[1].ino = sb.root_ino; |
| dent_blk->dentry[1].name_len = cpu_to_le16(2); |
| dent_blk->dentry[1].file_type = F2FS_FT_DIR; |
| memcpy(dent_blk->filename[1], "..", 2); |
| |
| /* bitmap for . and .. */ |
| dent_blk->dentry_bitmap[0] = (1 << 1) | (1 << 0); |
| blk_size_bytes = 1 << get_sb(log_blocksize); |
| data_blk_offset = get_sb(main_blkaddr); |
| data_blk_offset += config.cur_seg[CURSEG_HOT_DATA] * |
| config.blks_per_seg; |
| data_blk_offset *= blk_size_bytes; |
| |
| DBG(1, "\tWriting default dentry root, at offset 0x%08"PRIx64"\n", data_blk_offset); |
| if (dev_write(dent_blk, data_blk_offset, F2FS_BLKSIZE)) { |
| MSG(1, "\tError: While writing the dentry_blk to disk!!!\n"); |
| free(dent_blk); |
| return -1; |
| } |
| |
| free(dent_blk); |
| return 0; |
| } |
| |
| static int f2fs_create_root_dir(void) |
| { |
| int err = 0; |
| |
| err = f2fs_write_root_inode(); |
| if (err < 0) { |
| MSG(1, "\tError: Failed to write root inode!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_update_nat_root(); |
| if (err < 0) { |
| MSG(1, "\tError: Failed to update NAT for root!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_add_default_dentry_root(); |
| if (err < 0) { |
| MSG(1, "\tError: Failed to add default dentries for root!!!\n"); |
| goto exit; |
| } |
| exit: |
| if (err) |
| MSG(1, "\tError: Could not create the root directory!!!\n"); |
| |
| return err; |
| } |
| |
| int f2fs_format_device(void) |
| { |
| int err = 0; |
| |
| err= f2fs_prepare_super_block(); |
| if (err < 0) { |
| MSG(0, "\tError: Failed to prepare a super block!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_trim_device(); |
| if (err < 0) { |
| MSG(0, "\tError: Failed to trim whole device!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_init_sit_area(); |
| if (err < 0) { |
| MSG(0, "\tError: Failed to Initialise the SIT AREA!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_init_nat_area(); |
| if (err < 0) { |
| MSG(0, "\tError: Failed to Initialise the NAT AREA!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_create_root_dir(); |
| if (err < 0) { |
| MSG(0, "\tError: Failed to create the root directory!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_write_check_point_pack(); |
| if (err < 0) { |
| MSG(0, "\tError: Failed to write the check point pack!!!\n"); |
| goto exit; |
| } |
| |
| err = f2fs_write_super_block(); |
| if (err < 0) { |
| MSG(0, "\tError: Failed to write the Super Block!!!\n"); |
| goto exit; |
| } |
| exit: |
| if (err) |
| MSG(0, "\tError: Could not format the device!!!\n"); |
| |
| return err; |
| } |