tools/genfio - platform/external/fio - Gitiles

 #!/bin/bash
 #
 #  Copyright (C) 2013 eNovance SAS <licensing@enovance.com>
 #  Author: Erwan Velu  <erwan@enovance.com>
 #
 #  The license below covers all files distributed with fio unless otherwise
 #  noted in the file itself.
 #
 #  This program is free software; you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License version 2 as
 #  published by the Free Software Foundation.
 #
 #  This program is distributed in the hope that it will be useful,
 #  but WITHOUT ANY WARRANTY; without even the implied warranty of
 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 #  GNU General Public License for more details.
 #
 #  You should have received a copy of the GNU General Public License
 #  along with this program; if not, write to the Free Software
 #  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 BLK_SIZE=
 BLOCK_SIZE=4k
 SEQ=-1
 TEMPLATE=/tmp/template.fio
 OUTFILE=
 DISKS=
 PRINTABLE_DISKS=
 RUNTIME=300
 ETA=0
 MODES="write,randwrite,read,randread"
 SHORT_HOSTNAME=
 CACHED_IO="FALSE"
 PREFIX=""
 PREFIX_FILENAME=""
 IODEPTH=1

 show_help() {
 	PROG=$(basename $0)
 	echo "usage of $PROG:"
 	cat << EOF
 -h				: Show this help & exit
 -c				: Enable cached-based IOs
 					Disabled by default
 -a				: Run sequential test then parallel one
 					Disabled by default
 -s				: Run sequential test (default value)
 					one test after another then one disk after another
 					Disabled by default
 -p				: Run parallel test
 					one test after anoter but all disks at the same time
 					Enabled by default
 -D iodepth			: Run with the specified iodepth
 					Default is $IODEPTH
 -d disk1[,disk2,disk3,..]	: Run the tests on the selected disks
 					Separated each disk with a comma
 -r seconds			: Time in seconds per benchmark
 					0 means till the end of the device
 					Default is $RUNTIME seconds
 -b blocksize[,blocksize1, ...]  : The blocksizes to test under fio format (4k, 1m, ...)
 					Separated each blocksize with a comma
 					Default is $BLOCK_SIZE
 -m mode1,[mode2,mode3, ...]     : Define the fio IO profile to use like read, write, randread, randwrite
 					Default is "$MODES"
 -x prefix			: Add a prefix to the fio filename
 					Useful to let a context associated with the file
 					If the prefix features a / (slash), prefix will be considered as a directory
 -A cmd_to_run			: System command to run after each job (exec_postrun in fio)
 -B cmd_to_run			: System command to run before each job (exec_prerun in fio)

 Example:

 $PROG -d /dev/sdb,/dev/sdc,/dev/sdd,/dev/sde -a -b 4k,128k,1m -r 100 -a -x dellr720-day2/

 	Will generate an fio file that will run
 		- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 4k with write,randwrite,read,randread tests
 			ETA ~ 4 tests * 4 disks * 100 seconds
 		- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 128k with write,randwrite,read,randread tests
 			ETA ~ 4 tests * 4 disks * 100 seconds
 		- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 1m with write,randwrite,read,randread tests
 			ETA ~ 4 tests * 4 disks * 100 seconds
 		- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 4k with write,randwrite,read,randread tests
 			ETA ~ 4 tests * 100 seconds
 		- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 128k with write,randwrite,read,randread tests
 			ETA ~ 4 tests * 100 seconds
 		- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 1m with write,randwrite,read,randread tests
 			ETA ~ 4 tests * 100 seconds

 Generating dellr720-day2/localhost-4k,128k,1m-all-write,randwrite,read,randread-sdb,sdc,sdd,sde.fio
 Estimated Time = 6000 seconds : 1 hour 40 minutes
 EOF
 }

 finish_template() {
 echo "iodepth=$IODEPTH" >> $TEMPLATE

 if [ "$RUNTIME" != "0" ]; then
 	echo "runtime=$RUNTIME" >> $TEMPLATE
 	echo "time_based" >> $TEMPLATE
 fi

 if [ "$CACHED_IO" = "FALSE" ]; then
 	echo "direct=1" >> $TEMPLATE
 fi
 }


 diskname_to_printable() {
 COUNT=0
 for disk in $(echo $@ | tr "," " "); do
 	R=$(basename $disk | sed 's|/|_|g')
 	COUNT=$(($COUNT + 1))
 	if [ $COUNT -eq 1 ]; then
 		P="$R"
 	else
 		P="$P,$R"
 	fi
 done
 echo $P
 }

 gen_template() {
 cat >$TEMPLATE << EOF
 [global]
 ioengine=libaio
 invalidate=1
 ramp_time=5
 EOF
 }

 gen_seq_suite() {
 TYPE=$1
 disk=$2
 PRINTABLE_DISK=$(diskname_to_printable $disk)
 cat >> $OUTFILE << EOF
 [$TYPE-$PRINTABLE_DISK-$BLK_SIZE-seq]
 stonewall
 bs=$BLK_SIZE
 filename=$disk
 rw=$TYPE
 write_bw_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-seq.results
 write_iops_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-seq.results
 EOF
 ETA=$(($ETA + $RUNTIME))
 }

 gen_seq_fio() {
 for disk in $(echo $DISKS | tr "," " "); do
 	for mode in $(echo $MODES | tr "," " "); do
 		gen_seq_suite "$mode" "$disk"
 	done
 done
 }


 gen_para_suite() {
 TYPE=$1
 NEED_WALL=$2
 D=0
 for disk in $(echo $DISKS | tr "," " "); do
     PRINTABLE_DISK=$(diskname_to_printable $disk)
     cat >> $OUTFILE << EOF
 [$TYPE-$PRINTABLE_DISK-$BLK_SIZE-para]
 bs=$BLK_SIZE
 EOF

 if [ "$D" = 0 ]; then
     echo "stonewall" >> $OUTFILE
     D=1
 fi

 cat >> $OUTFILE << EOF
 filename=$disk
 rw=$TYPE
 write_bw_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-para.results
 write_iops_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-para.results
 EOF
 done

 ETA=$(($ETA + $RUNTIME))
 echo >> $OUTFILE
 }

 gen_para_fio() {
 for mode in $(echo $MODES | tr "," " "); do
 	gen_para_suite "$mode"
 done
 }

 gen_fio() {
 case $SEQ in
 	2)
 		gen_seq_fio
 		gen_para_fio
 	;;
 	1)
 		gen_seq_fio
 	;;
 	0)
 		gen_para_fio
 	;;
 esac
 }

 parse_cmdline() {
 while getopts "hacpsd:b:r:m:x:D:A:B:" opt; do
   case $opt in
     h)
 	show_help
 	exit 0
 	;;
     b)
 	BLOCK_SIZE=$OPTARG
 	;;
     c)
 	CACHED_IO="TRUE"
 	;;
     s)
 	if [ "$SEQ" = "-1" ]; then
 		SEQ=1
 	fi
       ;;
     x)
 	PREFIX=$OPTARG
 	echo "$PREFIX" | grep -q "/"
 	if [ "$?" -eq 0 ]; then
 		mkdir -p $PREFIX
 		# No need to keep the prefix for the log files
 		# we do have a directory for that
 		PREFIX_FILENAME=""
 	else
 		# We need to keep the prefix for the log files
 		PREFIX_FILENAME=$PREFIX
 	fi
 	;;
     r)
 	RUNTIME=$OPTARG
       ;;
     p)
 	if [ "$SEQ" = "-1" ]; then
 		SEQ=0
 	fi
       ;;
     m)
         MODES=$OPTARG;
       ;;
     d)
  	DISKS=$OPTARG
 	PRINTABLE_DISKS=$(diskname_to_printable "$DISKS")
       ;;
     D)
 	IODEPTH=$OPTARG
       ;;
     a)
 	SEQ=2
       ;;
     B)
 	echo "exec_prerun=$OPTARG" >> $TEMPLATE
       ;;
     A)
 	echo "exec_postrun=$OPTARG" >> $TEMPLATE
       ;;
     \?)
       echo "Invalid option: -$OPTARG" >&2
       ;;
   esac
 done

 if [ "$SEQ" = "-1" ]; then
 	SEQ=0
 fi

 SHORT_HOSTNAME=$(hostname -s)
 case $SEQ in
 	2)
 		OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-all-$MODES-$PRINTABLE_DISKS.fio
 	;;

 	1)
 		OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-sequential-$MODES-$PRINTABLE_DISKS.fio
 	;;
 	0)
 		OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-parallel-$MODES-$PRINTABLE_DISKS.fio
 	;;
 esac

 if [ -z "$DISKS" ]; then
 	echo "Missing DISKS !"
 	echo "Please read the help !"
 	show_help
 	exit 1
 fi

 }

 check_mode_order() {
 FOUND_WRITE="NO"
 CAUSE="You are reading data before writing them          "

 # If no write occurs, let's show a different message
 echo $MODES | grep -q "write"
 if [ "$?" -ne 0 ]; then
 	CAUSE="You are reading data while never wrote them before"
 fi

 for mode in $(echo $MODES | tr "," " "); do
 	echo $mode | grep -q write
 	if [ "$?" -eq 0 ]; then
 		FOUND_WRITE="YES"
 	fi
 	echo $mode | grep -q "read"
 	if [ "$?" -eq 0 ]; then
 		if [ "$FOUND_WRITE" = "NO" ]; then
 			echo "###############################################################"
 			echo "# Warning : $CAUSE#"
 			echo "# On some storage devices, this could lead to invalid results #"
 			echo "#                                                             #"
 			echo "# Press Ctrl-C to adjust pattern order if you have doubts     #"
 			echo "# Or Wait 5 seconds before the file will be created           #"
 			echo "###############################################################"
 			sleep 5
 			# No need to try showing the message more than one time
 			return
 		fi
 	fi
 done
 }


 ########## MAIN
 gen_template
 parse_cmdline "$@"
 finish_template
 check_mode_order

 echo "Generating $OUTFILE"
 cp -f $TEMPLATE $OUTFILE
 echo >> $OUTFILE

 for BLK_SIZE in $(echo $BLOCK_SIZE | tr "," " "); do
 	gen_fio
 done
 ETA_H=$(($ETA / 3600))
 ETA_M=$((($ETA - ($ETA_H*3600)) / 60))
 if [ "$ETA" = "0" ]; then
 	echo "Cannot estimate ETA as RUNTIME=0"
 else
 	echo "Estimated Time = $ETA seconds : $ETA_H hour $ETA_M minutes"
 fi
	#!/bin/bash
	#
	# Copyright (C) 2013 eNovance SAS <licensing@enovance.com>
	# Author: Erwan Velu <erwan@enovance.com>
	#
	# The license below covers all files distributed with fio unless otherwise
	# noted in the file itself.
	#
	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License version 2 as
	# published by the Free Software Foundation.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

	BLK_SIZE=
	BLOCK_SIZE=4k
	SEQ=-1
	TEMPLATE=/tmp/template.fio
	OUTFILE=
	DISKS=
	PRINTABLE_DISKS=
	RUNTIME=300
	ETA=0
	MODES="write,randwrite,read,randread"
	SHORT_HOSTNAME=
	CACHED_IO="FALSE"
	PREFIX=""
	PREFIX_FILENAME=""
	IODEPTH=1

	show_help() {
	PROG=$(basename $0)
	echo "usage of $PROG:"
	cat << EOF
	-h : Show this help & exit
	-c : Enable cached-based IOs
	Disabled by default
	-a : Run sequential test then parallel one
	Disabled by default
	-s : Run sequential test (default value)
	one test after another then one disk after another
	Disabled by default
	-p : Run parallel test
	one test after anoter but all disks at the same time
	Enabled by default
	-D iodepth : Run with the specified iodepth
	Default is $IODEPTH
	-d disk1[,disk2,disk3,..] : Run the tests on the selected disks
	Separated each disk with a comma
	-r seconds : Time in seconds per benchmark
	0 means till the end of the device
	Default is $RUNTIME seconds
	-b blocksize[,blocksize1, ...] : The blocksizes to test under fio format (4k, 1m, ...)
	Separated each blocksize with a comma
	Default is $BLOCK_SIZE
	-m mode1,[mode2,mode3, ...] : Define the fio IO profile to use like read, write, randread, randwrite
	Default is "$MODES"
	-x prefix : Add a prefix to the fio filename
	Useful to let a context associated with the file
	If the prefix features a / (slash), prefix will be considered as a directory
	-A cmd_to_run : System command to run after each job (exec_postrun in fio)
	-B cmd_to_run : System command to run before each job (exec_prerun in fio)

	Example:

	$PROG -d /dev/sdb,/dev/sdc,/dev/sdd,/dev/sde -a -b 4k,128k,1m -r 100 -a -x dellr720-day2/

	Will generate an fio file that will run
	- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 4k with write,randwrite,read,randread tests
	ETA ~ 4 tests * 4 disks * 100 seconds
	- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 128k with write,randwrite,read,randread tests
	ETA ~ 4 tests * 4 disks * 100 seconds
	- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 1m with write,randwrite,read,randread tests
	ETA ~ 4 tests * 4 disks * 100 seconds
	- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 4k with write,randwrite,read,randread tests
	ETA ~ 4 tests * 100 seconds
	- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 128k with write,randwrite,read,randread tests
	ETA ~ 4 tests * 100 seconds
	- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 1m with write,randwrite,read,randread tests
	ETA ~ 4 tests * 100 seconds

	Generating dellr720-day2/localhost-4k,128k,1m-all-write,randwrite,read,randread-sdb,sdc,sdd,sde.fio
	Estimated Time = 6000 seconds : 1 hour 40 minutes
	EOF
	}

	finish_template() {
	echo "iodepth=$IODEPTH" >> $TEMPLATE

	if [ "$RUNTIME" != "0" ]; then
	echo "runtime=$RUNTIME" >> $TEMPLATE
	echo "time_based" >> $TEMPLATE
	fi

	if [ "$CACHED_IO" = "FALSE" ]; then
	echo "direct=1" >> $TEMPLATE
	fi
	}


	diskname_to_printable() {
	COUNT=0
	for disk in $(echo $@ \| tr "," " "); do
	R=$(basename $disk \| sed 's\|/\|_\|g')
	COUNT=$(($COUNT + 1))
	if [ $COUNT -eq 1 ]; then
	P="$R"
	else
	P="$P,$R"
	fi
	done
	echo $P
	}

	gen_template() {
	cat >$TEMPLATE << EOF
	[global]
	ioengine=libaio
	invalidate=1
	ramp_time=5
	EOF
	}

	gen_seq_suite() {
	TYPE=$1
	disk=$2
	PRINTABLE_DISK=$(diskname_to_printable $disk)
	cat >> $OUTFILE << EOF
	[$TYPE-$PRINTABLE_DISK-$BLK_SIZE-seq]
	stonewall
	bs=$BLK_SIZE
	filename=$disk
	rw=$TYPE
	write_bw_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-seq.results
	write_iops_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-seq.results
	EOF
	ETA=$(($ETA + $RUNTIME))
	}

	gen_seq_fio() {
	for disk in $(echo $DISKS \| tr "," " "); do
	for mode in $(echo $MODES \| tr "," " "); do
	gen_seq_suite "$mode" "$disk"
	done
	done
	}


	gen_para_suite() {
	TYPE=$1
	NEED_WALL=$2
	D=0
	for disk in $(echo $DISKS \| tr "," " "); do
	PRINTABLE_DISK=$(diskname_to_printable $disk)
	cat >> $OUTFILE << EOF
	[$TYPE-$PRINTABLE_DISK-$BLK_SIZE-para]
	bs=$BLK_SIZE
	EOF

	if [ "$D" = 0 ]; then
	echo "stonewall" >> $OUTFILE
	D=1
	fi

	cat >> $OUTFILE << EOF
	filename=$disk
	rw=$TYPE
	write_bw_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-para.results
	write_iops_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-para.results
	EOF
	done

	ETA=$(($ETA + $RUNTIME))
	echo >> $OUTFILE
	}

	gen_para_fio() {
	for mode in $(echo $MODES \| tr "," " "); do
	gen_para_suite "$mode"
	done
	}

	gen_fio() {
	case $SEQ in
	2)
	gen_seq_fio
	gen_para_fio
	;;
	1)
	gen_seq_fio
	;;
	0)
	gen_para_fio
	;;
	esac
	}

	parse_cmdline() {
	while getopts "hacpsd:b:r:m:x:D:A:B:" opt; do
	case $opt in
	h)
	show_help
	exit 0
	;;
	b)
	BLOCK_SIZE=$OPTARG
	;;
	c)
	CACHED_IO="TRUE"
	;;
	s)
	if [ "$SEQ" = "-1" ]; then
	SEQ=1
	fi
	;;
	x)
	PREFIX=$OPTARG
	echo "$PREFIX" \| grep -q "/"
	if [ "$?" -eq 0 ]; then
	mkdir -p $PREFIX
	# No need to keep the prefix for the log files
	# we do have a directory for that
	PREFIX_FILENAME=""
	else
	# We need to keep the prefix for the log files
	PREFIX_FILENAME=$PREFIX
	fi
	;;
	r)
	RUNTIME=$OPTARG
	;;
	p)
	if [ "$SEQ" = "-1" ]; then
	SEQ=0
	fi
	;;
	m)
	MODES=$OPTARG;
	;;
	d)
	DISKS=$OPTARG
	PRINTABLE_DISKS=$(diskname_to_printable "$DISKS")
	;;
	D)
	IODEPTH=$OPTARG
	;;
	a)
	SEQ=2
	;;
	B)
	echo "exec_prerun=$OPTARG" >> $TEMPLATE
	;;
	A)
	echo "exec_postrun=$OPTARG" >> $TEMPLATE
	;;
	\?)
	echo "Invalid option: -$OPTARG" >&2
	;;
	esac
	done

	if [ "$SEQ" = "-1" ]; then
	SEQ=0
	fi

	SHORT_HOSTNAME=$(hostname -s)
	case $SEQ in
	2)
	OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-all-$MODES-$PRINTABLE_DISKS.fio
	;;

	1)
	OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-sequential-$MODES-$PRINTABLE_DISKS.fio
	;;
	0)
	OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-parallel-$MODES-$PRINTABLE_DISKS.fio
	;;
	esac

	if [ -z "$DISKS" ]; then
	echo "Missing DISKS !"
	echo "Please read the help !"
	show_help
	exit 1
	fi

	}

	check_mode_order() {
	FOUND_WRITE="NO"
	CAUSE="You are reading data before writing them "

	# If no write occurs, let's show a different message
	echo $MODES \| grep -q "write"
	if [ "$?" -ne 0 ]; then
	CAUSE="You are reading data while never wrote them before"
	fi

	for mode in $(echo $MODES \| tr "," " "); do
	echo $mode \| grep -q write
	if [ "$?" -eq 0 ]; then
	FOUND_WRITE="YES"
	fi
	echo $mode \| grep -q "read"
	if [ "$?" -eq 0 ]; then
	if [ "$FOUND_WRITE" = "NO" ]; then
	echo "###############################################################"
	echo "# Warning : $CAUSE#"
	echo "# On some storage devices, this could lead to invalid results #"
	echo "# #"
	echo "# Press Ctrl-C to adjust pattern order if you have doubts #"
	echo "# Or Wait 5 seconds before the file will be created #"
	echo "###############################################################"
	sleep 5
	# No need to try showing the message more than one time
	return
	fi
	fi
	done
	}


	########## MAIN
	gen_template
	parse_cmdline "$@"
	finish_template
	check_mode_order

	echo "Generating $OUTFILE"
	cp -f $TEMPLATE $OUTFILE
	echo >> $OUTFILE

	for BLK_SIZE in $(echo $BLOCK_SIZE \| tr "," " "); do
	gen_fio
	done
	ETA_H=$(($ETA / 3600))
	ETA_M=$((($ETA - ($ETA_H*3600)) / 60))
	if [ "$ETA" = "0" ]; then
	echo "Cannot estimate ETA as RUNTIME=0"
	else
	echo "Estimated Time = $ETA seconds : $ETA_H hour $ETA_M minutes"
	fi