| // support.cc |
| // Non-class support functions for gdisk program. |
| // Primarily by Rod Smith, February 2009, but with a few functions |
| // copied from other sources (see attributions below). |
| |
| /* This program is copyright (c) 2009 by Roderick W. Smith. It is distributed |
| under the terms of the GNU GPL version 2, as detailed in the COPYING file. */ |
| |
| #define __STDC_LIMIT_MACROS |
| #define __STDC_CONSTANT_MACROS |
| |
| #include <stdio.h> |
| #include <stdint.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <string.h> |
| #include <sys/stat.h> |
| #include <string> |
| #include <iostream> |
| #include <sstream> |
| #include "support.h" |
| |
| #include <sys/types.h> |
| |
| // As of 1/2010, BLKPBSZGET is very new, so I'm explicitly defining it if |
| // it's not already defined. This should become unnecessary in the future. |
| // Note that this is a Linux-only ioctl.... |
| #ifndef BLKPBSZGET |
| #define BLKPBSZGET _IO(0x12,123) |
| #endif |
| |
| using namespace std; |
| |
| // Get a numeric value from the user, between low and high (inclusive). |
| // Keeps looping until the user enters a value within that range. |
| // If user provides no input, def (default value) is returned. |
| // (If def is outside of the low-high range, an explicit response |
| // is required.) |
| int GetNumber(int low, int high, int def, const string & prompt) { |
| int response, num; |
| char line[255]; |
| |
| if (low != high) { // bother only if low and high differ... |
| response = low - 1; // force one loop by setting response outside range |
| while ((response < low) || (response > high)) { |
| cout << prompt; |
| cin.getline(line, 255); |
| num = sscanf(line, "%d", &response); |
| if (num == 1) { // user provided a response |
| if ((response < low) || (response > high)) |
| cout << "Value out of range\n"; |
| } else { // user hit enter; return default |
| response = def; |
| } // if/else |
| } // while |
| } else { // low == high, so return this value |
| cout << "Using " << low << "\n"; |
| response = low; |
| } // else |
| return (response); |
| } // GetNumber() |
| |
| // Gets a Y/N response (and converts lowercase to uppercase) |
| char GetYN(void) { |
| char line[255]; |
| char response = '\0'; |
| char *junk; |
| |
| while ((response != 'Y') && (response != 'N')) { |
| cout << "(Y/N): "; |
| junk = fgets(line, 255, stdin); |
| sscanf(line, "%c", &response); |
| if (response == 'y') response = 'Y'; |
| if (response == 'n') response = 'N'; |
| } // while |
| return response; |
| } // GetYN(void) |
| |
| // Obtains a sector number, between low and high, from the |
| // user, accepting values prefixed by "+" to add sectors to low, |
| // or the same with "K", "M", "G", or "T" as suffixes to add |
| // kilobytes, megabytes, gigabytes, or terabytes, respectively. |
| // If a "-" prefix is used, use the high value minus the user- |
| // specified number of sectors (or KiB, MiB, etc.). Use the def |
| //value as the default if the user just hits Enter |
| uint64_t GetSectorNum(uint64_t low, uint64_t high, uint64_t def, const string & prompt) { |
| uint64_t response, mult = 1; |
| int plusFlag = 0; |
| char suffix, line[255]; |
| |
| response = low - 1; // Ensure one pass by setting a too-low initial value |
| while ((response < low) || (response > high)) { |
| cout << prompt; |
| cin.getline(line, 255); |
| |
| // Remove leading spaces, if present |
| while (line[0] == ' ') |
| strcpy(line, &line[1]); |
| |
| // If present, flag and remove leading plus sign |
| if (line[0] == '+') { |
| plusFlag = 1; |
| strcpy(line, &line[1]); |
| } // if |
| |
| // If present, flag and remove leading minus sign |
| if (line[0] == '-') { |
| plusFlag = -1; |
| strcpy(line, &line[1]); |
| } // if |
| |
| // Extract numeric response and, if present, suffix |
| istringstream inString(line); |
| inString >> response >> suffix; |
| |
| // If no response, use default (def) |
| if (strlen(line) == 0) { |
| response = def; |
| suffix = ' '; |
| plusFlag = 0; |
| } // if |
| |
| // Set multiplier based on suffix |
| switch (suffix) { |
| case 'K': |
| case 'k': |
| mult = (uint64_t) 1024 / SECTOR_SIZE; |
| break; |
| case 'M': |
| case 'm': |
| mult = (uint64_t) 1048576 / SECTOR_SIZE; |
| break; |
| case 'G': |
| case 'g': |
| mult = (uint64_t) 1073741824 / SECTOR_SIZE; |
| break; |
| case 'T': |
| case 't': |
| mult = ((uint64_t) 1073741824 * (uint64_t) 1024) / (uint64_t) SECTOR_SIZE; |
| break; |
| default: |
| mult = 1; |
| } // switch |
| |
| // Adjust response based on multiplier and plus flag, if present |
| response *= mult; |
| if (plusFlag == 1) { |
| // Recompute response based on low part of range (if default = high |
| // value, which should be the case when prompting for the end of a |
| // range) or the defaut value (if default != high, which should be |
| // the case for the first sector of a partition). |
| if (def == high) |
| response = response + low - UINT64_C(1); |
| else |
| response = response + def - UINT64_C(1); |
| } // if |
| if (plusFlag == -1) { |
| response = high - response; |
| } // if |
| } // while |
| return response; |
| } // GetSectorNum() |
| |
| // Takes a size in bytes (in size) and converts this to a size in |
| // SI units (KiB, MiB, GiB, TiB, or PiB), returned in C++ string |
| // form |
| string BytesToSI(uint64_t size) { |
| string units; |
| ostringstream theValue; |
| float sizeInSI; |
| |
| sizeInSI = (float) size; |
| units = " bytes"; |
| if (sizeInSI > 1024.0) { |
| sizeInSI /= 1024.0; |
| units = " KiB"; |
| } // if |
| if (sizeInSI > 1024.0) { |
| sizeInSI /= 1024.0; |
| units = " MiB"; |
| } // if |
| if (sizeInSI > 1024.0) { |
| sizeInSI /= 1024.0; |
| units = " GiB"; |
| } // if |
| if (sizeInSI > 1024.0) { |
| sizeInSI /= 1024.0; |
| units = " TiB"; |
| } // if |
| if (sizeInSI > 1024.0) { |
| sizeInSI /= 1024.0; |
| units = " PiB"; |
| } // if |
| theValue.setf(ios::fixed); |
| if (units == " bytes") { // in bytes, so no decimal point |
| theValue.precision(0); |
| } else { |
| theValue.precision(1); |
| } // if/else |
| theValue << sizeInSI << units; |
| return theValue.str(); |
| } // BlocksToSI() |
| |
| // Converts two consecutive characters in the input string into a |
| // number, interpreting the string as a hexadecimal number, starting |
| // at the specified position. |
| unsigned char StrToHex(const string & input, unsigned int position) { |
| unsigned char retval = 0x00; |
| unsigned int temp; |
| |
| if (input.length() >= (position + 2)) { |
| sscanf(input.substr(position, 2).c_str(), "%x", &temp); |
| retval = (unsigned char) temp; |
| } // if |
| return retval; |
| } // StrToHex() |
| |
| // Return 1 if the CPU architecture is little endian, 0 if it's big endian.... |
| int IsLittleEndian(void) { |
| int littleE = 1; // assume little-endian (Intel-style) |
| union { |
| uint32_t num; |
| unsigned char uc[sizeof(uint32_t)]; |
| } endian; |
| |
| endian.num = 1; |
| if (endian.uc[0] != (unsigned char) 1) { |
| littleE = 0; |
| } // if |
| return (littleE); |
| } // IsLittleEndian() |
| |
| // Reverse the byte order of theValue; numBytes is number of bytes |
| void ReverseBytes(void* theValue, int numBytes) { |
| char* tempValue = NULL; |
| int i; |
| |
| tempValue = new char [numBytes]; |
| if (tempValue != NULL) { |
| memcpy(tempValue, theValue, numBytes); |
| for (i = 0; i < numBytes; i++) |
| ((char*) theValue)[i] = tempValue[numBytes - i - 1]; |
| delete[] tempValue; |
| } // if |
| } // ReverseBytes() |
| |
| // Extract integer data from argument string, which should be colon-delimited |
| uint64_t GetInt(const string & argument, int itemNum) { |
| int startPos = -1, endPos = -1; |
| uint64_t retval = 0; |
| |
| while (itemNum-- > 0) { |
| startPos = endPos + 1; |
| endPos = (int) argument.find(':', startPos); |
| } |
| if (endPos == (int) string::npos) |
| endPos = (int) argument.length(); |
| endPos--; |
| |
| istringstream inString(argument.substr(startPos, endPos - startPos + 1)); |
| inString >> retval; |
| return retval; |
| } // GetInt() |
| |
| // Extract string data from argument string, which should be colon-delimited |
| string GetString(const string & argument, int itemNum) { |
| int startPos = -1, endPos = -1; |
| |
| while (itemNum-- > 0) { |
| startPos = endPos + 1; |
| endPos = (int) argument.find(':', startPos); |
| } |
| if (endPos == (int) string::npos) |
| endPos = (int) argument.length(); |
| endPos--; |
| |
| return argument.substr(startPos, endPos - startPos + 1); |
| } // GetString() |