| # Copyright 2015, Google Inc. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: |
| # |
| # * Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # * Redistributions in binary form must reproduce the above |
| # copyright notice, this list of conditions and the following disclaimer |
| # in the documentation and/or other materials provided with the |
| # distribution. |
| # * Neither the name of Google Inc. nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| require 'forwardable' |
| require 'grpc/generic/bidi_call' |
| |
| class Struct |
| # BatchResult is the struct returned by calls to call#start_batch. |
| class BatchResult |
| # check_status returns the status, raising an error if the status |
| # is non-nil and not OK. |
| def check_status |
| return nil if status.nil? |
| fail GRPC::Cancelled if status.code == GRPC::Core::StatusCodes::CANCELLED |
| if status.code != GRPC::Core::StatusCodes::OK |
| GRPC.logger.debug("Failing with status #{status}") |
| # raise BadStatus, propagating the metadata if present. |
| md = status.metadata |
| with_sym_keys = Hash[md.each_pair.collect { |x, y| [x.to_sym, y] }] |
| fail GRPC::BadStatus.new(status.code, status.details, **with_sym_keys) |
| end |
| status |
| end |
| end |
| end |
| |
| # GRPC contains the General RPC module. |
| module GRPC |
| # The ActiveCall class provides simple methods for sending marshallable |
| # data to a call |
| class ActiveCall |
| include Core::TimeConsts |
| include Core::CallOps |
| extend Forwardable |
| attr_reader(:deadline) |
| def_delegators :@call, :cancel, :metadata |
| |
| # client_invoke begins a client invocation. |
| # |
| # Flow Control note: this blocks until flow control accepts that client |
| # request can go ahead. |
| # |
| # deadline is the absolute deadline for the call. |
| # |
| # == Keyword Arguments == |
| # any keyword arguments are treated as metadata to be sent to the server |
| # if a keyword value is a list, multiple metadata for it's key are sent |
| # |
| # @param call [Call] a call on which to start and invocation |
| # @param q [CompletionQueue] the completion queue |
| def self.client_invoke(call, q, **kw) |
| fail(TypeError, '!Core::Call') unless call.is_a? Core::Call |
| unless q.is_a? Core::CompletionQueue |
| fail(TypeError, '!Core::CompletionQueue') |
| end |
| metadata_tag = Object.new |
| call.run_batch(q, metadata_tag, INFINITE_FUTURE, |
| SEND_INITIAL_METADATA => kw) |
| metadata_tag |
| end |
| |
| # Creates an ActiveCall. |
| # |
| # ActiveCall should only be created after a call is accepted. That |
| # means different things on a client and a server. On the client, the |
| # call is accepted after calling call.invoke. On the server, this is |
| # after call.accept. |
| # |
| # #initialize cannot determine if the call is accepted or not; so if a |
| # call that's not accepted is used here, the error won't be visible until |
| # the ActiveCall methods are called. |
| # |
| # deadline is the absolute deadline for the call. |
| # |
| # @param call [Call] the call used by the ActiveCall |
| # @param q [CompletionQueue] the completion queue used to accept |
| # the call |
| # @param marshal [Function] f(obj)->string that marshal requests |
| # @param unmarshal [Function] f(string)->obj that unmarshals responses |
| # @param deadline [Fixnum] the deadline for the call to complete |
| # @param metadata_tag [Object] the object use obtain metadata for clients |
| # @param started [true|false] indicates if the call has begun |
| def initialize(call, q, marshal, unmarshal, deadline, started: true, |
| metadata_tag: nil) |
| fail(TypeError, '!Core::Call') unless call.is_a? Core::Call |
| unless q.is_a? Core::CompletionQueue |
| fail(TypeError, '!Core::CompletionQueue') |
| end |
| @call = call |
| @cq = q |
| @deadline = deadline |
| @marshal = marshal |
| @started = started |
| @unmarshal = unmarshal |
| @metadata_tag = metadata_tag |
| @op_notifier = nil |
| end |
| |
| # output_metadata are provides access to hash that can be used to |
| # save metadata to be sent as trailer |
| def output_metadata |
| @output_metadata ||= {} |
| end |
| |
| # cancelled indicates if the call was cancelled |
| def cancelled |
| !@call.status.nil? && @call.status.code == Core::StatusCodes::CANCELLED |
| end |
| |
| # multi_req_view provides a restricted view of this ActiveCall for use |
| # in a server client-streaming handler. |
| def multi_req_view |
| MultiReqView.new(self) |
| end |
| |
| # single_req_view provides a restricted view of this ActiveCall for use in |
| # a server request-response handler. |
| def single_req_view |
| SingleReqView.new(self) |
| end |
| |
| # operation provides a restricted view of this ActiveCall for use as |
| # a Operation. |
| def operation |
| @op_notifier = Notifier.new |
| Operation.new(self) |
| end |
| |
| # writes_done indicates that all writes are completed. |
| # |
| # It blocks until the remote endpoint acknowledges with at status unless |
| # assert_finished is set to false. Any calls to #remote_send after this |
| # call will fail. |
| # |
| # @param assert_finished [true, false] when true(default), waits for |
| # FINISHED. |
| def writes_done(assert_finished = true) |
| ops = { |
| SEND_CLOSE_FROM_CLIENT => nil |
| } |
| ops[RECV_STATUS_ON_CLIENT] = nil if assert_finished |
| batch_result = @call.run_batch(@cq, self, INFINITE_FUTURE, ops) |
| return unless assert_finished |
| @call.status = batch_result.status |
| op_is_done |
| batch_result.check_status |
| end |
| |
| # finished waits until a client call is completed. |
| # |
| # It blocks until the remote endpoint acknowledges by sending a status. |
| def finished |
| batch_result = @call.run_batch(@cq, self, INFINITE_FUTURE, |
| RECV_STATUS_ON_CLIENT => nil) |
| unless batch_result.status.nil? |
| if @call.metadata.nil? |
| @call.metadata = batch_result.status.metadata |
| else |
| @call.metadata.merge!(batch_result.status.metadata) |
| end |
| end |
| @call.status = batch_result.status |
| op_is_done |
| batch_result.check_status |
| end |
| |
| # remote_send sends a request to the remote endpoint. |
| # |
| # It blocks until the remote endpoint accepts the message. |
| # |
| # @param req [Object, String] the object to send or it's marshal form. |
| # @param marshalled [false, true] indicates if the object is already |
| # marshalled. |
| def remote_send(req, marshalled = false) |
| GRPC.logger.debug("sending #{req}, marshalled? #{marshalled}") |
| if marshalled |
| payload = req |
| else |
| payload = @marshal.call(req) |
| end |
| @call.run_batch(@cq, self, INFINITE_FUTURE, SEND_MESSAGE => payload) |
| end |
| |
| # send_status sends a status to the remote endpoint. |
| # |
| # @param code [int] the status code to send |
| # @param details [String] details |
| # @param assert_finished [true, false] when true(default), waits for |
| # FINISHED. |
| # |
| # == Keyword Arguments == |
| # any keyword arguments are treated as metadata to be sent to the server |
| # if a keyword value is a list, multiple metadata for it's key are sent |
| def send_status(code = OK, details = '', assert_finished = false, **kw) |
| ops = { |
| SEND_STATUS_FROM_SERVER => Struct::Status.new(code, details, kw) |
| } |
| ops[RECV_CLOSE_ON_SERVER] = nil if assert_finished |
| @call.run_batch(@cq, self, INFINITE_FUTURE, ops) |
| nil |
| end |
| |
| # remote_read reads a response from the remote endpoint. |
| # |
| # It blocks until the remote endpoint replies with a message or status. |
| # On receiving a message, it returns the response after unmarshalling it. |
| # On receiving a status, it returns nil if the status is OK, otherwise |
| # raising BadStatus |
| def remote_read |
| ops = { RECV_MESSAGE => nil } |
| ops[RECV_INITIAL_METADATA] = nil unless @metadata_tag.nil? |
| batch_result = @call.run_batch(@cq, self, INFINITE_FUTURE, ops) |
| unless @metadata_tag.nil? |
| @call.metadata = batch_result.metadata |
| @metadata_tag = nil |
| end |
| GRPC.logger.debug("received req: #{batch_result}") |
| unless batch_result.nil? || batch_result.message.nil? |
| GRPC.logger.debug("received req.to_s: #{batch_result.message}") |
| res = @unmarshal.call(batch_result.message) |
| GRPC.logger.debug("received_req (unmarshalled): #{res.inspect}") |
| return res |
| end |
| GRPC.logger.debug('found nil; the final response has been sent') |
| nil |
| end |
| |
| # each_remote_read passes each response to the given block or returns an |
| # enumerator the responses if no block is given. |
| # |
| # == Enumerator == |
| # |
| # * #next blocks until the remote endpoint sends a READ or FINISHED |
| # * for each read, enumerator#next yields the response |
| # * on status |
| # * if it's is OK, enumerator#next raises StopException |
| # * if is not OK, enumerator#next raises RuntimeException |
| # |
| # == Block == |
| # |
| # * if provided it is executed for each response |
| # * the call blocks until no more responses are provided |
| # |
| # @return [Enumerator] if no block was given |
| def each_remote_read |
| return enum_for(:each_remote_read) unless block_given? |
| loop do |
| resp = remote_read |
| break if resp.nil? # the last response was received |
| yield resp |
| end |
| end |
| |
| # each_remote_read_then_finish passes each response to the given block or |
| # returns an enumerator of the responses if no block is given. |
| # |
| # It is like each_remote_read, but it blocks on finishing on detecting |
| # the final message. |
| # |
| # == Enumerator == |
| # |
| # * #next blocks until the remote endpoint sends a READ or FINISHED |
| # * for each read, enumerator#next yields the response |
| # * on status |
| # * if it's is OK, enumerator#next raises StopException |
| # * if is not OK, enumerator#next raises RuntimeException |
| # |
| # == Block == |
| # |
| # * if provided it is executed for each response |
| # * the call blocks until no more responses are provided |
| # |
| # @return [Enumerator] if no block was given |
| def each_remote_read_then_finish |
| return enum_for(:each_remote_read_then_finish) unless block_given? |
| loop do |
| resp = remote_read |
| break if resp.is_a? Struct::Status # is an OK status |
| if resp.nil? # the last response was received, but not finished yet |
| finished |
| break |
| end |
| yield resp |
| end |
| end |
| |
| # request_response sends a request to a GRPC server, and returns the |
| # response. |
| # |
| # == Keyword Arguments == |
| # any keyword arguments are treated as metadata to be sent to the server |
| # if a keyword value is a list, multiple metadata for it's key are sent |
| # |
| # @param req [Object] the request sent to the server |
| # @return [Object] the response received from the server |
| def request_response(req, **kw) |
| start_call(**kw) unless @started |
| remote_send(req) |
| writes_done(false) |
| response = remote_read |
| finished unless response.is_a? Struct::Status |
| response |
| rescue GRPC::Core::CallError => e |
| finished # checks for Cancelled |
| raise e |
| end |
| |
| # client_streamer sends a stream of requests to a GRPC server, and |
| # returns a single response. |
| # |
| # requests provides an 'iterable' of Requests. I.e. it follows Ruby's |
| # #each enumeration protocol. In the simplest case, requests will be an |
| # array of marshallable objects; in typical case it will be an Enumerable |
| # that allows dynamic construction of the marshallable objects. |
| # |
| # == Keyword Arguments == |
| # any keyword arguments are treated as metadata to be sent to the server |
| # if a keyword value is a list, multiple metadata for it's key are sent |
| # |
| # @param requests [Object] an Enumerable of requests to send |
| # @return [Object] the response received from the server |
| def client_streamer(requests, **kw) |
| start_call(**kw) unless @started |
| requests.each { |r| remote_send(r) } |
| writes_done(false) |
| response = remote_read |
| finished unless response.is_a? Struct::Status |
| response |
| rescue GRPC::Core::CallError => e |
| finished # checks for Cancelled |
| raise e |
| end |
| |
| # server_streamer sends one request to the GRPC server, which yields a |
| # stream of responses. |
| # |
| # responses provides an enumerator over the streamed responses, i.e. it |
| # follows Ruby's #each iteration protocol. The enumerator blocks while |
| # waiting for each response, stops when the server signals that no |
| # further responses will be supplied. If the implicit block is provided, |
| # it is executed with each response as the argument and no result is |
| # returned. |
| # |
| # == Keyword Arguments == |
| # any keyword arguments are treated as metadata to be sent to the server |
| # if a keyword value is a list, multiple metadata for it's key are sent |
| # any keyword arguments are treated as metadata to be sent to the server. |
| # |
| # @param req [Object] the request sent to the server |
| # @return [Enumerator|nil] a response Enumerator |
| def server_streamer(req, **kw) |
| start_call(**kw) unless @started |
| remote_send(req) |
| writes_done(false) |
| replies = enum_for(:each_remote_read_then_finish) |
| return replies unless block_given? |
| replies.each { |r| yield r } |
| rescue GRPC::Core::CallError => e |
| finished # checks for Cancelled |
| raise e |
| end |
| |
| # bidi_streamer sends a stream of requests to the GRPC server, and yields |
| # a stream of responses. |
| # |
| # This method takes an Enumerable of requests, and returns and enumerable |
| # of responses. |
| # |
| # == requests == |
| # |
| # requests provides an 'iterable' of Requests. I.e. it follows Ruby's |
| # #each enumeration protocol. In the simplest case, requests will be an |
| # array of marshallable objects; in typical case it will be an |
| # Enumerable that allows dynamic construction of the marshallable |
| # objects. |
| # |
| # == responses == |
| # |
| # This is an enumerator of responses. I.e, its #next method blocks |
| # waiting for the next response. Also, if at any point the block needs |
| # to consume all the remaining responses, this can be done using #each or |
| # #collect. Calling #each or #collect should only be done if |
| # the_call#writes_done has been called, otherwise the block will loop |
| # forever. |
| # |
| # == Keyword Arguments == |
| # any keyword arguments are treated as metadata to be sent to the server |
| # if a keyword value is a list, multiple metadata for it's key are sent |
| # |
| # @param requests [Object] an Enumerable of requests to send |
| # @return [Enumerator, nil] a response Enumerator |
| def bidi_streamer(requests, **kw, &blk) |
| start_call(**kw) unless @started |
| bd = BidiCall.new(@call, @cq, @marshal, @unmarshal) |
| bd.run_on_client(requests, @op_notifier, &blk) |
| end |
| |
| # run_server_bidi orchestrates a BiDi stream processing on a server. |
| # |
| # N.B. gen_each_reply is a func(Enumerable<Requests>) |
| # |
| # It takes an enumerable of requests as an arg, in case there is a |
| # relationship between the stream of requests and the stream of replies. |
| # |
| # This does not mean that must necessarily be one. E.g, the replies |
| # produced by gen_each_reply could ignore the received_msgs |
| # |
| # @param gen_each_reply [Proc] generates the BiDi stream replies |
| def run_server_bidi(gen_each_reply) |
| bd = BidiCall.new(@call, @cq, @marshal, @unmarshal) |
| bd.run_on_server(gen_each_reply) |
| end |
| |
| # Waits till an operation completes |
| def wait |
| return if @op_notifier.nil? |
| GRPC.logger.debug("active_call.wait: on #{@op_notifier}") |
| @op_notifier.wait |
| end |
| |
| # Signals that an operation is done |
| def op_is_done |
| return if @op_notifier.nil? |
| @op_notifier.notify(self) |
| end |
| |
| private |
| |
| # Starts the call if not already started |
| def start_call(**kw) |
| return if @started |
| @metadata_tag = ActiveCall.client_invoke(@call, @cq, **kw) |
| @started = true |
| end |
| |
| def self.view_class(*visible_methods) |
| Class.new do |
| extend ::Forwardable |
| def_delegators :@wrapped, *visible_methods |
| |
| # @param wrapped [ActiveCall] the call whose methods are shielded |
| def initialize(wrapped) |
| @wrapped = wrapped |
| end |
| end |
| end |
| |
| # SingleReqView limits access to an ActiveCall's methods for use in server |
| # handlers that receive just one request. |
| SingleReqView = view_class(:cancelled, :deadline, :metadata, |
| :output_metadata) |
| |
| # MultiReqView limits access to an ActiveCall's methods for use in |
| # server client_streamer handlers. |
| MultiReqView = view_class(:cancelled, :deadline, :each_queued_msg, |
| :each_remote_read, :metadata, :output_metadata) |
| |
| # Operation limits access to an ActiveCall's methods for use as |
| # a Operation on the client. |
| Operation = view_class(:cancel, :cancelled, :deadline, :execute, |
| :metadata, :status, :start_call, :wait) |
| end |
| end |