| /* |
| * Copyright © 2013 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Daniel Vetter <daniel.vetter@ffwll.ch> |
| * Damien Lespiau <damien.lespiau@intel.com> |
| */ |
| |
| #include "config.h" |
| #include <inttypes.h> |
| #include <unistd.h> |
| #include <stdio.h> |
| #include <stdarg.h> |
| #include <fcntl.h> |
| #include <sys/stat.h> |
| #include <string.h> |
| #include <stdlib.h> |
| #ifdef HAVE_LINUX_KD_H |
| #include <linux/kd.h> |
| #elif HAVE_SYS_KD_H |
| #include <sys/kd.h> |
| #endif |
| |
| #include <libudev.h> |
| #include <poll.h> |
| #include <errno.h> |
| #include <time.h> |
| |
| #include <i915_drm.h> |
| |
| #include "drmtest.h" |
| #include "igt_kms.h" |
| #include "igt_aux.h" |
| #include "intel_chipset.h" |
| #include "igt_debugfs.h" |
| #include "igt_sysfs.h" |
| #include "sw_sync.h" |
| |
| /** |
| * SECTION:igt_kms |
| * @short_description: Kernel modesetting support library |
| * @title: KMS |
| * @include: igt.h |
| * |
| * This library provides support to enumerate and set modeset configurations. |
| * |
| * There are two parts in this library: First the low level helper function |
| * which directly build on top of raw ioctls or the interfaces provided by |
| * libdrm. Those functions all have a kmstest_ prefix. |
| * |
| * The second part is a high-level library to manage modeset configurations |
| * which abstracts away some of the low-level details like the difference |
| * between legacy and universal plane support for setting cursors or in the |
| * future the difference between legacy and atomic commit. These high-level |
| * functions have all igt_ prefixes. This part is still very much work in |
| * progress and so also lacks a bit documentation for the individual functions. |
| * |
| * Note that this library's header pulls in the [i-g-t framebuffer](igt-gpu-tools-i-g-t-framebuffer.html) |
| * library as a dependency. |
| */ |
| |
| /* list of connectors that need resetting on exit */ |
| #define MAX_CONNECTORS 32 |
| static char *forced_connectors[MAX_CONNECTORS + 1]; |
| static int forced_connectors_device[MAX_CONNECTORS + 1]; |
| |
| static void update_edid_csum(unsigned char *edid, int cea_pos) |
| { |
| int i, sum = 0; |
| struct tm *tm; |
| time_t t; |
| |
| /* year of manufacture */ |
| t = time(NULL); |
| tm = localtime(&t); |
| edid[17] = tm->tm_year - 90; |
| |
| /* calculate checksum */ |
| for (i = 0; i < 127; i++) { |
| sum = sum + edid[cea_pos + i]; |
| } |
| edid[cea_pos + 127] = 256 - sum; |
| } |
| |
| #define VFREQ 60 |
| #define CLOCK 148500 |
| #define HACTIVE 1920 |
| #define HBLANK 280 |
| #define VACTIVE 1080 |
| #define VBLANK 45 |
| #define HOFFSET 88 |
| #define HPULSE 44 |
| #define VOFFSET 4 |
| #define VPULSE 5 |
| |
| #define HSIZE 52 |
| #define VSIZE 30 |
| |
| #define EDID_NAME base_edid |
| #include "igt_edid_template.h" |
| |
| /** |
| * igt_kms_get_base_edid: |
| * |
| * Get the base edid block, which includes the following modes: |
| * |
| * - 1920x1080 60Hz |
| * - 1280x720 60Hz |
| * - 1024x768 60Hz |
| * - 800x600 60Hz |
| * - 640x480 60Hz |
| * |
| * This can be extended with further features using functions such as |
| * #kmstest_edid_add_3d. |
| * |
| * Returns: a basic edid block |
| */ |
| const unsigned char* igt_kms_get_base_edid(void) |
| { |
| update_edid_csum(base_edid, 0); |
| |
| return base_edid; |
| } |
| |
| #define VFREQ 60 |
| #define CLOCK 101000 |
| #define HACTIVE 1400 |
| #define HBLANK 160 |
| #define VACTIVE 1050 |
| #define VBLANK 30 |
| #define HOFFSET 48 |
| #define HPULSE 32 |
| #define VOFFSET 3 |
| #define VPULSE 4 |
| |
| #define HSIZE 52 |
| #define VSIZE 30 |
| |
| #define EDID_NAME alt_edid |
| #include "igt_edid_template.h" |
| |
| const char * const igt_plane_prop_names[IGT_NUM_PLANE_PROPS] = { |
| [IGT_PLANE_SRC_X] = "SRC_X", |
| [IGT_PLANE_SRC_Y] = "SRC_Y", |
| [IGT_PLANE_SRC_W] = "SRC_W", |
| [IGT_PLANE_SRC_H] = "SRC_H", |
| [IGT_PLANE_CRTC_X] = "CRTC_X", |
| [IGT_PLANE_CRTC_Y] = "CRTC_Y", |
| [IGT_PLANE_CRTC_W] = "CRTC_W", |
| [IGT_PLANE_CRTC_H] = "CRTC_H", |
| [IGT_PLANE_FB_ID] = "FB_ID", |
| [IGT_PLANE_CRTC_ID] = "CRTC_ID", |
| [IGT_PLANE_IN_FENCE_FD] = "IN_FENCE_FD", |
| [IGT_PLANE_TYPE] = "type", |
| [IGT_PLANE_ROTATION] = "rotation", |
| [IGT_PLANE_IN_FORMATS] = "IN_FORMATS", |
| [IGT_PLANE_COLOR_ENCODING] = "COLOR_ENCODING", |
| [IGT_PLANE_COLOR_RANGE] = "COLOR_RANGE", |
| [IGT_PLANE_PIXEL_BLEND_MODE] = "pixel blend mode", |
| [IGT_PLANE_ALPHA] = "alpha", |
| }; |
| |
| const char * const igt_crtc_prop_names[IGT_NUM_CRTC_PROPS] = { |
| [IGT_CRTC_BACKGROUND] = "background_color", |
| [IGT_CRTC_CTM] = "CTM", |
| [IGT_CRTC_GAMMA_LUT] = "GAMMA_LUT", |
| [IGT_CRTC_GAMMA_LUT_SIZE] = "GAMMA_LUT_SIZE", |
| [IGT_CRTC_DEGAMMA_LUT] = "DEGAMMA_LUT", |
| [IGT_CRTC_DEGAMMA_LUT_SIZE] = "DEGAMMA_LUT_SIZE", |
| [IGT_CRTC_MODE_ID] = "MODE_ID", |
| [IGT_CRTC_ACTIVE] = "ACTIVE", |
| [IGT_CRTC_OUT_FENCE_PTR] = "OUT_FENCE_PTR", |
| [IGT_CRTC_VRR_ENABLED] = "VRR_ENABLED", |
| }; |
| |
| const char * const igt_connector_prop_names[IGT_NUM_CONNECTOR_PROPS] = { |
| [IGT_CONNECTOR_SCALING_MODE] = "scaling mode", |
| [IGT_CONNECTOR_CRTC_ID] = "CRTC_ID", |
| [IGT_CONNECTOR_DPMS] = "DPMS", |
| [IGT_CONNECTOR_BROADCAST_RGB] = "Broadcast RGB", |
| [IGT_CONNECTOR_CONTENT_PROTECTION] = "Content Protection", |
| [IGT_CONNECTOR_VRR_CAPABLE] = "vrr_capable", |
| }; |
| |
| /* |
| * Retrieve all the properies specified in props_name and store them into |
| * plane->props. |
| */ |
| static void |
| igt_fill_plane_props(igt_display_t *display, igt_plane_t *plane, |
| int num_props, const char * const prop_names[]) |
| { |
| drmModeObjectPropertiesPtr props; |
| int i, j, fd; |
| |
| fd = display->drm_fd; |
| |
| props = drmModeObjectGetProperties(fd, plane->drm_plane->plane_id, DRM_MODE_OBJECT_PLANE); |
| igt_assert(props); |
| |
| for (i = 0; i < props->count_props; i++) { |
| drmModePropertyPtr prop = |
| drmModeGetProperty(fd, props->props[i]); |
| |
| for (j = 0; j < num_props; j++) { |
| if (strcmp(prop->name, prop_names[j]) != 0) |
| continue; |
| |
| plane->props[j] = props->props[i]; |
| break; |
| } |
| |
| drmModeFreeProperty(prop); |
| } |
| |
| drmModeFreeObjectProperties(props); |
| } |
| |
| /* |
| * Retrieve all the properies specified in props_name and store them into |
| * config->atomic_props_crtc and config->atomic_props_connector. |
| */ |
| static void |
| igt_atomic_fill_connector_props(igt_display_t *display, igt_output_t *output, |
| int num_connector_props, const char * const conn_prop_names[]) |
| { |
| drmModeObjectPropertiesPtr props; |
| int i, j, fd; |
| |
| fd = display->drm_fd; |
| |
| props = drmModeObjectGetProperties(fd, output->config.connector->connector_id, DRM_MODE_OBJECT_CONNECTOR); |
| igt_assert(props); |
| |
| for (i = 0; i < props->count_props; i++) { |
| drmModePropertyPtr prop = |
| drmModeGetProperty(fd, props->props[i]); |
| |
| for (j = 0; j < num_connector_props; j++) { |
| if (strcmp(prop->name, conn_prop_names[j]) != 0) |
| continue; |
| |
| output->props[j] = props->props[i]; |
| break; |
| } |
| |
| drmModeFreeProperty(prop); |
| } |
| |
| drmModeFreeObjectProperties(props); |
| } |
| |
| static void |
| igt_fill_pipe_props(igt_display_t *display, igt_pipe_t *pipe, |
| int num_crtc_props, const char * const crtc_prop_names[]) |
| { |
| drmModeObjectPropertiesPtr props; |
| int i, j, fd; |
| |
| fd = display->drm_fd; |
| |
| props = drmModeObjectGetProperties(fd, pipe->crtc_id, DRM_MODE_OBJECT_CRTC); |
| igt_assert(props); |
| |
| for (i = 0; i < props->count_props; i++) { |
| drmModePropertyPtr prop = |
| drmModeGetProperty(fd, props->props[i]); |
| |
| for (j = 0; j < num_crtc_props; j++) { |
| if (strcmp(prop->name, crtc_prop_names[j]) != 0) |
| continue; |
| |
| pipe->props[j] = props->props[i]; |
| break; |
| } |
| |
| drmModeFreeProperty(prop); |
| } |
| |
| drmModeFreeObjectProperties(props); |
| } |
| |
| /** |
| * igt_kms_get_alt_edid: |
| * |
| * Get an alternate edid block, which includes the following modes: |
| * |
| * - 1400x1050 60Hz |
| * - 1920x1080 60Hz |
| * - 1280x720 60Hz |
| * - 1024x768 60Hz |
| * - 800x600 60Hz |
| * - 640x480 60Hz |
| * |
| * This can be extended with further features using functions such as |
| * #kmstest_edid_add_3d. |
| * |
| * Returns: an alternate edid block |
| */ |
| const unsigned char* igt_kms_get_alt_edid(void) |
| { |
| update_edid_csum(alt_edid, 0); |
| |
| return alt_edid; |
| } |
| |
| /** |
| * kmstest_pipe_name: |
| * @pipe: display pipe |
| * |
| * Returns: String representing @pipe, e.g. "A". |
| */ |
| const char *kmstest_pipe_name(enum pipe pipe) |
| { |
| static const char str[] = "A\0B\0C\0D\0E\0F"; |
| |
| _Static_assert(sizeof(str) == IGT_MAX_PIPES * 2, |
| "Missing pipe name"); |
| |
| if (pipe == PIPE_NONE) |
| return "None"; |
| |
| if (pipe >= IGT_MAX_PIPES) |
| return "invalid"; |
| |
| return str + (pipe * 2); |
| } |
| |
| /** |
| * kmstest_pipe_to_index: |
| *@pipe: display pipe in string format |
| * |
| * Returns: index to corresponding pipe |
| */ |
| int kmstest_pipe_to_index(char pipe) |
| { |
| int r = pipe - 'A'; |
| |
| if (r < 0 || r >= IGT_MAX_PIPES) |
| return -EINVAL; |
| |
| return r; |
| } |
| |
| /** |
| * kmstest_plane_type_name: |
| * @plane_type: display plane type |
| * |
| * Returns: String representing @plane_type, e.g. "overlay". |
| */ |
| const char *kmstest_plane_type_name(int plane_type) |
| { |
| static const char * const names[] = { |
| [DRM_PLANE_TYPE_OVERLAY] = "overlay", |
| [DRM_PLANE_TYPE_PRIMARY] = "primary", |
| [DRM_PLANE_TYPE_CURSOR] = "cursor", |
| }; |
| |
| igt_assert(plane_type < ARRAY_SIZE(names) && names[plane_type]); |
| |
| return names[plane_type]; |
| } |
| |
| struct type_name { |
| int type; |
| const char *name; |
| }; |
| |
| static const char *find_type_name(const struct type_name *names, int type) |
| { |
| for (; names->name; names++) { |
| if (names->type == type) |
| return names->name; |
| } |
| |
| return "(invalid)"; |
| } |
| |
| static const struct type_name encoder_type_names[] = { |
| { DRM_MODE_ENCODER_NONE, "none" }, |
| { DRM_MODE_ENCODER_DAC, "DAC" }, |
| { DRM_MODE_ENCODER_TMDS, "TMDS" }, |
| { DRM_MODE_ENCODER_LVDS, "LVDS" }, |
| { DRM_MODE_ENCODER_TVDAC, "TVDAC" }, |
| { DRM_MODE_ENCODER_VIRTUAL, "Virtual" }, |
| { DRM_MODE_ENCODER_DSI, "DSI" }, |
| { DRM_MODE_ENCODER_DPMST, "DP MST" }, |
| {} |
| }; |
| |
| /** |
| * kmstest_encoder_type_str: |
| * @type: DRM_MODE_ENCODER_* enumeration value |
| * |
| * Returns: A string representing the drm encoder @type. |
| */ |
| const char *kmstest_encoder_type_str(int type) |
| { |
| return find_type_name(encoder_type_names, type); |
| } |
| |
| static const struct type_name connector_status_names[] = { |
| { DRM_MODE_CONNECTED, "connected" }, |
| { DRM_MODE_DISCONNECTED, "disconnected" }, |
| { DRM_MODE_UNKNOWNCONNECTION, "unknown" }, |
| {} |
| }; |
| |
| /** |
| * kmstest_connector_status_str: |
| * @status: DRM_MODE_* connector status value |
| * |
| * Returns: A string representing the drm connector status @status. |
| */ |
| const char *kmstest_connector_status_str(int status) |
| { |
| return find_type_name(connector_status_names, status); |
| } |
| |
| static const struct type_name connector_type_names[] = { |
| { DRM_MODE_CONNECTOR_Unknown, "Unknown" }, |
| { DRM_MODE_CONNECTOR_VGA, "VGA" }, |
| { DRM_MODE_CONNECTOR_DVII, "DVI-I" }, |
| { DRM_MODE_CONNECTOR_DVID, "DVI-D" }, |
| { DRM_MODE_CONNECTOR_DVIA, "DVI-A" }, |
| { DRM_MODE_CONNECTOR_Composite, "Composite" }, |
| { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" }, |
| { DRM_MODE_CONNECTOR_LVDS, "LVDS" }, |
| { DRM_MODE_CONNECTOR_Component, "Component" }, |
| { DRM_MODE_CONNECTOR_9PinDIN, "DIN" }, |
| { DRM_MODE_CONNECTOR_DisplayPort, "DP" }, |
| { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" }, |
| { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" }, |
| { DRM_MODE_CONNECTOR_TV, "TV" }, |
| { DRM_MODE_CONNECTOR_eDP, "eDP" }, |
| { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" }, |
| { DRM_MODE_CONNECTOR_DSI, "DSI" }, |
| { DRM_MODE_CONNECTOR_DPI, "DPI" }, |
| {} |
| }; |
| |
| /** |
| * kmstest_connector_type_str: |
| * @type: DRM_MODE_CONNECTOR_* enumeration value |
| * |
| * Returns: A string representing the drm connector @type. |
| */ |
| const char *kmstest_connector_type_str(int type) |
| { |
| return find_type_name(connector_type_names, type); |
| } |
| |
| static const char *mode_stereo_name(const drmModeModeInfo *mode) |
| { |
| switch (mode->flags & DRM_MODE_FLAG_3D_MASK) { |
| case DRM_MODE_FLAG_3D_FRAME_PACKING: |
| return "FP"; |
| case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: |
| return "FA"; |
| case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: |
| return "LA"; |
| case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: |
| return "SBSF"; |
| case DRM_MODE_FLAG_3D_L_DEPTH: |
| return "LD"; |
| case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: |
| return "LDGFX"; |
| case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: |
| return "TB"; |
| case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: |
| return "SBSH"; |
| default: |
| return NULL; |
| } |
| } |
| |
| /** |
| * kmstest_dump_mode: |
| * @mode: libdrm mode structure |
| * |
| * Prints @mode to stdout in a human-readable form. |
| */ |
| void kmstest_dump_mode(drmModeModeInfo *mode) |
| { |
| const char *stereo = mode_stereo_name(mode); |
| |
| igt_info(" %s %d %d %d %d %d %d %d %d %d 0x%x 0x%x %d%s%s%s\n", |
| mode->name, mode->vrefresh, |
| mode->hdisplay, mode->hsync_start, |
| mode->hsync_end, mode->htotal, |
| mode->vdisplay, mode->vsync_start, |
| mode->vsync_end, mode->vtotal, |
| mode->flags, mode->type, mode->clock, |
| stereo ? " (3D:" : "", |
| stereo ? stereo : "", stereo ? ")" : ""); |
| } |
| |
| /** |
| * kmstest_get_pipe_from_crtc_id: |
| * @fd: DRM fd |
| * @crtc_id: DRM CRTC id |
| * |
| * Returns: The crtc index for the given DRM CRTC ID @crtc_id. The crtc index |
| * is the equivalent of the pipe id. This value maps directly to an enum pipe |
| * value used in other helper functions. Returns 0 if the index could not be |
| * determined. |
| */ |
| |
| int kmstest_get_pipe_from_crtc_id(int fd, int crtc_id) |
| { |
| drmModeRes *res; |
| drmModeCrtc *crtc; |
| int i, cur_id; |
| |
| res = drmModeGetResources(fd); |
| igt_assert(res); |
| |
| for (i = 0; i < res->count_crtcs; i++) { |
| crtc = drmModeGetCrtc(fd, res->crtcs[i]); |
| igt_assert(crtc); |
| cur_id = crtc->crtc_id; |
| drmModeFreeCrtc(crtc); |
| if (cur_id == crtc_id) |
| break; |
| } |
| |
| igt_assert(i < res->count_crtcs); |
| |
| drmModeFreeResources(res); |
| |
| return i; |
| } |
| |
| /** |
| * kmstest_find_crtc_for_connector: |
| * @fd: DRM fd |
| * @res: libdrm resources pointer |
| * @connector: libdrm connector pointer |
| * @crtc_blacklist_idx_mask: a mask of CRTC indexes that we can't return |
| * |
| * Returns: the CRTC ID for a CRTC that fits the connector, otherwise it asserts |
| * false and never returns. The blacklist mask can be used in case you have |
| * CRTCs that are already in use by other connectors. |
| */ |
| uint32_t kmstest_find_crtc_for_connector(int fd, drmModeRes *res, |
| drmModeConnector *connector, |
| uint32_t crtc_blacklist_idx_mask) |
| { |
| drmModeEncoder *e; |
| uint32_t possible_crtcs; |
| int i, j; |
| |
| for (i = 0; i < connector->count_encoders; i++) { |
| e = drmModeGetEncoder(fd, connector->encoders[i]); |
| possible_crtcs = e->possible_crtcs & ~crtc_blacklist_idx_mask; |
| drmModeFreeEncoder(e); |
| |
| for (j = 0; possible_crtcs >> j; j++) |
| if (possible_crtcs & (1 << j)) |
| return res->crtcs[j]; |
| } |
| |
| igt_assert(false); |
| } |
| |
| /** |
| * kmstest_dumb_create: |
| * @fd: open drm file descriptor |
| * @width: width of the buffer in pixels |
| * @height: height of the buffer in pixels |
| * @bpp: bytes per pixel of the buffer |
| * @stride: Pointer which receives the dumb bo's stride, can be NULL. |
| * @size: Pointer which receives the dumb bo's size, can be NULL. |
| * |
| * This wraps the CREATE_DUMB ioctl, which allocates a new dumb buffer object |
| * for the specified dimensions. |
| * |
| * Returns: The file-private handle of the created buffer object |
| */ |
| uint32_t kmstest_dumb_create(int fd, int width, int height, int bpp, |
| unsigned *stride, uint64_t *size) |
| { |
| struct drm_mode_create_dumb create; |
| |
| memset(&create, 0, sizeof(create)); |
| create.width = width; |
| create.height = height; |
| create.bpp = bpp; |
| |
| create.handle = 0; |
| do_ioctl(fd, DRM_IOCTL_MODE_CREATE_DUMB, &create); |
| igt_assert(create.handle); |
| igt_assert(create.size >= (uint64_t) width * height * bpp / 8); |
| |
| if (stride) |
| *stride = create.pitch; |
| |
| if (size) |
| *size = create.size; |
| |
| return create.handle; |
| } |
| |
| /** |
| * kmstest_dumb_map_buffer: |
| * @fd: Opened drm file descriptor |
| * @handle: Offset in the file referred to by fd |
| * @size: Length of the mapping, must be greater than 0 |
| * @prot: Describes the memory protection of the mapping |
| * Returns: A pointer representing the start of the virtual mapping |
| */ |
| void *kmstest_dumb_map_buffer(int fd, uint32_t handle, uint64_t size, |
| unsigned prot) |
| { |
| struct drm_mode_map_dumb arg = {}; |
| void *ptr; |
| |
| arg.handle = handle; |
| |
| do_ioctl(fd, DRM_IOCTL_MODE_MAP_DUMB, &arg); |
| |
| ptr = mmap(NULL, size, prot, MAP_SHARED, fd, arg.offset); |
| igt_assert(ptr != MAP_FAILED); |
| |
| return ptr; |
| } |
| |
| static int __kmstest_dumb_destroy(int fd, uint32_t handle) |
| { |
| struct drm_mode_destroy_dumb arg = { handle }; |
| int err = 0; |
| |
| if (drmIoctl(fd, DRM_IOCTL_MODE_DESTROY_DUMB, &arg)) |
| err = -errno; |
| |
| errno = 0; |
| return err; |
| } |
| |
| /** |
| * kmstest_dumb_destroy: |
| * @fd: Opened drm file descriptor |
| * @handle: Offset in the file referred to by fd |
| */ |
| void kmstest_dumb_destroy(int fd, uint32_t handle) |
| { |
| igt_assert_eq(__kmstest_dumb_destroy(fd, handle), 0); |
| } |
| |
| /* |
| * Returns: the previous mode, or KD_GRAPHICS if no /dev/tty0 was |
| * found and nothing was done. |
| */ |
| static signed long set_vt_mode(unsigned long mode) |
| { |
| int fd; |
| unsigned long prev_mode; |
| static const char TTY0[] = "/dev/tty0"; |
| |
| if (access(TTY0, F_OK)) { |
| /* errno message should be "No such file". Do not |
| hardcode but ask strerror() in the very unlikely |
| case something else happened. */ |
| igt_debug("VT: %s: %s, cannot change its mode\n", |
| TTY0, strerror(errno)); |
| return KD_GRAPHICS; |
| } |
| |
| fd = open(TTY0, O_RDONLY); |
| if (fd < 0) |
| return -errno; |
| |
| prev_mode = 0; |
| if (drmIoctl(fd, KDGETMODE, &prev_mode)) |
| goto err; |
| if (drmIoctl(fd, KDSETMODE, (void *)mode)) |
| goto err; |
| |
| close(fd); |
| |
| return prev_mode; |
| err: |
| close(fd); |
| |
| return -errno; |
| } |
| |
| static unsigned long orig_vt_mode = -1UL; |
| |
| /** |
| * kmstest_restore_vt_mode: |
| * |
| * Restore the VT mode in use before #kmstest_set_vt_graphics_mode was called. |
| */ |
| void kmstest_restore_vt_mode(void) |
| { |
| long ret; |
| |
| if (orig_vt_mode != -1UL) { |
| ret = set_vt_mode(orig_vt_mode); |
| |
| igt_assert(ret >= 0); |
| igt_debug("VT: original mode 0x%lx restored\n", orig_vt_mode); |
| orig_vt_mode = -1UL; |
| } |
| } |
| |
| /** |
| * kmstest_set_vt_graphics_mode: |
| * |
| * Sets the controlling VT (if available) into graphics/raw mode and installs |
| * an igt exit handler to set the VT back to text mode on exit. Use |
| * #kmstest_restore_vt_mode to restore the previous VT mode manually. |
| * |
| * All kms tests must call this function to make sure that the fbcon doesn't |
| * interfere by e.g. blanking the screen. |
| */ |
| void kmstest_set_vt_graphics_mode(void) |
| { |
| long ret; |
| |
| igt_install_exit_handler((igt_exit_handler_t) kmstest_restore_vt_mode); |
| |
| ret = set_vt_mode(KD_GRAPHICS); |
| |
| igt_assert(ret >= 0); |
| orig_vt_mode = ret; |
| |
| igt_debug("VT: graphics mode set (mode was 0x%lx)\n", ret); |
| } |
| |
| |
| static void reset_connectors_at_exit(int sig) |
| { |
| igt_reset_connectors(); |
| } |
| |
| /** |
| * kmstest_force_connector: |
| * @fd: drm file descriptor |
| * @connector: connector |
| * @state: state to force on @connector |
| * |
| * Force the specified state on the specified connector. |
| * |
| * Returns: true on success |
| */ |
| bool kmstest_force_connector(int drm_fd, drmModeConnector *connector, |
| enum kmstest_force_connector_state state) |
| { |
| char *path, **tmp; |
| const char *value; |
| drmModeConnector *temp; |
| uint32_t devid; |
| int len, dir, idx; |
| |
| if (is_i915_device(drm_fd)) { |
| devid = intel_get_drm_devid(drm_fd); |
| |
| /* |
| * forcing hdmi or dp connectors on HSW and BDW doesn't |
| * currently work, so fail early to allow the test to skip if |
| * required |
| */ |
| if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA || |
| connector->connector_type == DRM_MODE_CONNECTOR_HDMIB || |
| connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) |
| && (IS_HASWELL(devid) || IS_BROADWELL(devid))) |
| return false; |
| } |
| |
| switch (state) { |
| case FORCE_CONNECTOR_ON: |
| value = "on"; |
| break; |
| case FORCE_CONNECTOR_DIGITAL: |
| value = "on-digital"; |
| break; |
| case FORCE_CONNECTOR_OFF: |
| value = "off"; |
| break; |
| |
| default: |
| case FORCE_CONNECTOR_UNSPECIFIED: |
| value = "detect"; |
| break; |
| } |
| |
| dir = igt_sysfs_open(drm_fd, &idx); |
| if (dir < 0) |
| return false; |
| |
| if (asprintf(&path, "card%d-%s-%d/status", |
| idx, |
| kmstest_connector_type_str(connector->connector_type), |
| connector->connector_type_id) < 0) { |
| close(dir); |
| return false; |
| } |
| |
| if (!igt_sysfs_set(dir, path, value)) { |
| close(dir); |
| return false; |
| } |
| |
| for (len = 0, tmp = forced_connectors; *tmp; tmp++) { |
| /* check the connector is not already present */ |
| if (strcmp(*tmp, path) == 0) { |
| len = -1; |
| break; |
| } |
| len++; |
| } |
| |
| if (len != -1 && len < MAX_CONNECTORS) { |
| forced_connectors[len] = path; |
| forced_connectors_device[len] = dir; |
| } |
| |
| if (len >= MAX_CONNECTORS) |
| igt_warn("Connector limit reached, %s will not be reset\n", |
| path); |
| |
| igt_debug("Connector %s is now forced %s\n", path, value); |
| igt_debug("Current forced connectors:\n"); |
| tmp = forced_connectors; |
| while (*tmp) { |
| igt_debug("\t%s\n", *tmp); |
| tmp++; |
| } |
| |
| igt_install_exit_handler(reset_connectors_at_exit); |
| |
| /* To allow callers to always use GetConnectorCurrent we need to force a |
| * redetection here. */ |
| temp = drmModeGetConnector(drm_fd, connector->connector_id); |
| drmModeFreeConnector(temp); |
| |
| return true; |
| } |
| |
| /** |
| * kmstest_force_edid: |
| * @drm_fd: drm file descriptor |
| * @connector: connector to set @edid on |
| * @edid: An EDID data block |
| * @length: length of the EDID data. #EDID_LENGTH defines the standard EDID |
| * length |
| * |
| * Set the EDID data on @connector to @edid. See also #igt_kms_get_base_edid. |
| * |
| * If @length is zero, the forced EDID will be removed. |
| */ |
| void kmstest_force_edid(int drm_fd, drmModeConnector *connector, |
| const unsigned char *edid, size_t length) |
| { |
| char *path; |
| int debugfs_fd, ret; |
| drmModeConnector *temp; |
| |
| igt_assert_neq(asprintf(&path, "%s-%d/edid_override", kmstest_connector_type_str(connector->connector_type), connector->connector_type_id), |
| -1); |
| debugfs_fd = igt_debugfs_open(drm_fd, path, O_WRONLY | O_TRUNC); |
| free(path); |
| |
| igt_require(debugfs_fd != -1); |
| |
| if (length == 0) |
| ret = write(debugfs_fd, "reset", 5); |
| else |
| ret = write(debugfs_fd, edid, length); |
| close(debugfs_fd); |
| |
| /* To allow callers to always use GetConnectorCurrent we need to force a |
| * redetection here. */ |
| temp = drmModeGetConnector(drm_fd, connector->connector_id); |
| drmModeFreeConnector(temp); |
| |
| igt_assert(ret != -1); |
| } |
| |
| /** |
| * kmstest_get_connector_default_mode: |
| * @drm_fd: DRM fd |
| * @connector: libdrm connector |
| * @mode: libdrm mode |
| * |
| * Retrieves the default mode for @connector and stores it in @mode. |
| * |
| * Returns: true on success, false on failure |
| */ |
| bool kmstest_get_connector_default_mode(int drm_fd, drmModeConnector *connector, |
| drmModeModeInfo *mode) |
| { |
| int i; |
| |
| if (!connector->count_modes) { |
| igt_warn("no modes for connector %d\n", |
| connector->connector_id); |
| return false; |
| } |
| |
| for (i = 0; i < connector->count_modes; i++) { |
| if (i == 0 || |
| connector->modes[i].type & DRM_MODE_TYPE_PREFERRED) { |
| *mode = connector->modes[i]; |
| if (mode->type & DRM_MODE_TYPE_PREFERRED) |
| break; |
| } |
| } |
| |
| return true; |
| } |
| |
| static void |
| _kmstest_connector_config_crtc_mask(int drm_fd, |
| drmModeConnector *connector, |
| struct kmstest_connector_config *config) |
| { |
| int i; |
| |
| config->valid_crtc_idx_mask = 0; |
| |
| /* Now get a compatible encoder */ |
| for (i = 0; i < connector->count_encoders; i++) { |
| drmModeEncoder *encoder = drmModeGetEncoder(drm_fd, |
| connector->encoders[i]); |
| |
| if (!encoder) { |
| igt_warn("could not get encoder %d: %s\n", |
| connector->encoders[i], |
| strerror(errno)); |
| |
| continue; |
| } |
| |
| config->valid_crtc_idx_mask |= encoder->possible_crtcs; |
| drmModeFreeEncoder(encoder); |
| } |
| } |
| |
| static drmModeEncoder * |
| _kmstest_connector_config_find_encoder(int drm_fd, drmModeConnector *connector, enum pipe pipe) |
| { |
| int i; |
| |
| for (i = 0; i < connector->count_encoders; i++) { |
| drmModeEncoder *encoder = drmModeGetEncoder(drm_fd, connector->encoders[i]); |
| |
| if (!encoder) { |
| igt_warn("could not get encoder %d: %s\n", |
| connector->encoders[i], |
| strerror(errno)); |
| |
| continue; |
| } |
| |
| if (encoder->possible_crtcs & (1 << pipe)) |
| return encoder; |
| |
| drmModeFreeEncoder(encoder); |
| } |
| |
| igt_assert(false); |
| return NULL; |
| } |
| |
| /** |
| * _kmstest_connector_config: |
| * @drm_fd: DRM fd |
| * @connector_id: DRM connector id |
| * @crtc_idx_mask: mask of allowed DRM CRTC indices |
| * @config: structure filled with the possible configuration |
| * @probe: whether to fully re-probe mode list or not |
| * |
| * This tries to find a suitable configuration for the given connector and CRTC |
| * constraint and fills it into @config. |
| */ |
| static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id, |
| unsigned long crtc_idx_mask, |
| struct kmstest_connector_config *config, |
| bool probe) |
| { |
| drmModeRes *resources; |
| drmModeConnector *connector; |
| |
| config->pipe = PIPE_NONE; |
| |
| resources = drmModeGetResources(drm_fd); |
| if (!resources) { |
| igt_warn("drmModeGetResources failed"); |
| goto err1; |
| } |
| |
| /* First, find the connector & mode */ |
| if (probe) |
| connector = drmModeGetConnector(drm_fd, connector_id); |
| else |
| connector = drmModeGetConnectorCurrent(drm_fd, connector_id); |
| |
| if (!connector) |
| goto err2; |
| |
| if (connector->connector_id != connector_id) { |
| igt_warn("connector id doesn't match (%d != %d)\n", |
| connector->connector_id, connector_id); |
| goto err3; |
| } |
| |
| /* |
| * Find given CRTC if crtc_id != 0 or else the first CRTC not in use. |
| * In both cases find the first compatible encoder and skip the CRTC |
| * if there is non such. |
| */ |
| _kmstest_connector_config_crtc_mask(drm_fd, connector, config); |
| |
| if (!connector->count_modes) |
| memset(&config->default_mode, 0, sizeof(config->default_mode)); |
| else if (!kmstest_get_connector_default_mode(drm_fd, connector, |
| &config->default_mode)) |
| goto err3; |
| |
| config->connector = connector; |
| |
| crtc_idx_mask &= config->valid_crtc_idx_mask; |
| if (!crtc_idx_mask) |
| /* Keep config->connector */ |
| goto err2; |
| |
| config->pipe = ffs(crtc_idx_mask) - 1; |
| |
| config->encoder = _kmstest_connector_config_find_encoder(drm_fd, connector, config->pipe); |
| config->crtc = drmModeGetCrtc(drm_fd, resources->crtcs[config->pipe]); |
| |
| if (connector->connection != DRM_MODE_CONNECTED) |
| goto err2; |
| |
| if (!connector->count_modes) { |
| if (probe) |
| igt_warn("connector %d/%s-%d has no modes\n", connector_id, |
| kmstest_connector_type_str(connector->connector_type), |
| connector->connector_type_id); |
| goto err2; |
| } |
| |
| drmModeFreeResources(resources); |
| return true; |
| err3: |
| drmModeFreeConnector(connector); |
| err2: |
| drmModeFreeResources(resources); |
| err1: |
| return false; |
| } |
| |
| /** |
| * kmstest_get_connector_config: |
| * @drm_fd: DRM fd |
| * @connector_id: DRM connector id |
| * @crtc_idx_mask: mask of allowed DRM CRTC indices |
| * @config: structure filled with the possible configuration |
| * |
| * This tries to find a suitable configuration for the given connector and CRTC |
| * constraint and fills it into @config. |
| */ |
| bool kmstest_get_connector_config(int drm_fd, uint32_t connector_id, |
| unsigned long crtc_idx_mask, |
| struct kmstest_connector_config *config) |
| { |
| return _kmstest_connector_config(drm_fd, connector_id, crtc_idx_mask, |
| config, 0); |
| } |
| |
| /** |
| * kmstest_probe_connector_config: |
| * @drm_fd: DRM fd |
| * @connector_id: DRM connector id |
| * @crtc_idx_mask: mask of allowed DRM CRTC indices |
| * @config: structure filled with the possible configuration |
| * |
| * This tries to find a suitable configuration for the given connector and CRTC |
| * constraint and fills it into @config, fully probing the connector in the |
| * process. |
| */ |
| bool kmstest_probe_connector_config(int drm_fd, uint32_t connector_id, |
| unsigned long crtc_idx_mask, |
| struct kmstest_connector_config *config) |
| { |
| return _kmstest_connector_config(drm_fd, connector_id, crtc_idx_mask, |
| config, 1); |
| } |
| |
| /** |
| * kmstest_free_connector_config: |
| * @config: connector configuration structure |
| * |
| * Free any resources in @config allocated in kmstest_get_connector_config(). |
| */ |
| void kmstest_free_connector_config(struct kmstest_connector_config *config) |
| { |
| drmModeFreeCrtc(config->crtc); |
| config->crtc = NULL; |
| |
| drmModeFreeEncoder(config->encoder); |
| config->encoder = NULL; |
| |
| drmModeFreeConnector(config->connector); |
| config->connector = NULL; |
| } |
| |
| /** |
| * kmstest_set_connector_dpms: |
| * @fd: DRM fd |
| * @connector: libdrm connector |
| * @mode: DRM DPMS value |
| * |
| * This function sets the DPMS setting of @connector to @mode. |
| */ |
| void kmstest_set_connector_dpms(int fd, drmModeConnector *connector, int mode) |
| { |
| int i, dpms = 0; |
| bool found_it = false; |
| |
| for (i = 0; i < connector->count_props; i++) { |
| struct drm_mode_get_property prop = { |
| .prop_id = connector->props[i], |
| }; |
| |
| if (drmIoctl(fd, DRM_IOCTL_MODE_GETPROPERTY, &prop)) |
| continue; |
| |
| if (strcmp(prop.name, "DPMS")) |
| continue; |
| |
| dpms = prop.prop_id; |
| found_it = true; |
| break; |
| } |
| igt_assert_f(found_it, "DPMS property not found on %d\n", |
| connector->connector_id); |
| |
| igt_assert(drmModeConnectorSetProperty(fd, connector->connector_id, |
| dpms, mode) == 0); |
| } |
| |
| /** |
| * kmstest_get_property: |
| * @drm_fd: drm file descriptor |
| * @object_id: object whose properties we're going to get |
| * @object_type: type of obj_id (DRM_MODE_OBJECT_*) |
| * @name: name of the property we're going to get |
| * @prop_id: if not NULL, returns the property id |
| * @value: if not NULL, returns the property value |
| * @prop: if not NULL, returns the property, and the caller will have to free |
| * it manually. |
| * |
| * Finds a property with the given name on the given object. |
| * |
| * Returns: true in case we found something. |
| */ |
| bool |
| kmstest_get_property(int drm_fd, uint32_t object_id, uint32_t object_type, |
| const char *name, uint32_t *prop_id /* out */, |
| uint64_t *value /* out */, |
| drmModePropertyPtr *prop /* out */) |
| { |
| drmModeObjectPropertiesPtr proplist; |
| drmModePropertyPtr _prop; |
| bool found = false; |
| int i; |
| |
| proplist = drmModeObjectGetProperties(drm_fd, object_id, object_type); |
| for (i = 0; i < proplist->count_props; i++) { |
| _prop = drmModeGetProperty(drm_fd, proplist->props[i]); |
| if (!_prop) |
| continue; |
| |
| if (strcmp(_prop->name, name) == 0) { |
| found = true; |
| if (prop_id) |
| *prop_id = proplist->props[i]; |
| if (value) |
| *value = proplist->prop_values[i]; |
| if (prop) |
| *prop = _prop; |
| else |
| drmModeFreeProperty(_prop); |
| |
| break; |
| } |
| drmModeFreeProperty(_prop); |
| } |
| |
| drmModeFreeObjectProperties(proplist); |
| return found; |
| } |
| |
| struct edid_block { |
| int pos; |
| unsigned char *data; |
| }; |
| |
| #define DTD_SUPPORTS_AUDIO 1<<6 |
| |
| static struct edid_block |
| init_cea_block(const unsigned char *edid, size_t length, |
| unsigned char *new_edid_ptr[], size_t *new_length, |
| char extra_extensions_length, |
| uint32_t dtd_support) |
| { |
| struct edid_block new_edid; |
| int n_extensions; |
| int pos; |
| static const char cea_header_len = 4, video_block_len = 6; |
| |
| igt_assert(new_edid_ptr != NULL && new_length != NULL); |
| |
| *new_length = length + 128; |
| |
| new_edid.data = calloc(*new_length, sizeof(*new_edid.data)); |
| igt_assert_f(new_edid.data, "Failed to allocate %zu bytes for edid\n", sizeof(new_length)); |
| memcpy(new_edid.data, edid, length); |
| *new_edid_ptr = new_edid.data; |
| |
| n_extensions = new_edid.data[126]; |
| n_extensions++; |
| new_edid.data[126] = n_extensions; |
| |
| update_edid_csum(new_edid.data, 0); |
| |
| /* add a cea-861 extension block */ |
| pos = length; |
| new_edid.data[pos++] = 0x2; |
| new_edid.data[pos++] = 0x3; |
| new_edid.data[pos++] = cea_header_len + video_block_len + |
| extra_extensions_length; |
| new_edid.data[pos++] = dtd_support; |
| |
| /* video block (id | length) */ |
| new_edid.data[pos++] = 2 << 5 | (video_block_len - 1); |
| new_edid.data[pos++] = 32 | 0x80; /* 1080p @ 24Hz | (native)*/ |
| new_edid.data[pos++] = 5; /* 1080i @ 60Hz */ |
| new_edid.data[pos++] = 20; /* 1080i @ 50Hz */ |
| new_edid.data[pos++] = 4; /* 720p @ 60Hz*/ |
| new_edid.data[pos++] = 19; /* 720p @ 50Hz*/ |
| new_edid.pos = pos; |
| |
| return new_edid; |
| } |
| |
| /** |
| * kmstest_edid_add_3d: |
| * @edid: an existing valid edid block |
| * @length: length of @edid |
| * @new_edid_ptr: pointer to where the new edid will be placed |
| * @new_length: pointer to the size of the new edid |
| * |
| * Makes a copy of an existing edid block and adds an extension indicating |
| * stereo 3D capabilities. |
| */ |
| void kmstest_edid_add_3d(const unsigned char *edid, size_t length, |
| unsigned char *new_edid_ptr[], size_t *new_length) |
| { |
| char vsdb_block_len = 11; |
| struct edid_block new_edid = init_cea_block(edid, length, new_edid_ptr, |
| new_length, vsdb_block_len, |
| 0); |
| int pos = new_edid.pos; |
| |
| /* vsdb block ( id | length ) */ |
| new_edid.data[pos++] = 3 << 5 | (vsdb_block_len - 1); |
| /* registration id */ |
| new_edid.data[pos++] = 0x3; |
| new_edid.data[pos++] = 0xc; |
| new_edid.data[pos++] = 0x0; |
| /* source physical address */ |
| new_edid.data[pos++] = 0x10; |
| new_edid.data[pos++] = 0x00; |
| /* Supports_AI ... etc */ |
| new_edid.data[pos++] = 0x00; |
| /* Max TMDS Clock */ |
| new_edid.data[pos++] = 0x00; |
| /* Latency present, HDMI Video Present */ |
| new_edid.data[pos++] = 0x20; |
| /* HDMI Video */ |
| new_edid.data[pos++] = 0x80; |
| new_edid.data[pos++] = 0x00; |
| |
| update_edid_csum(new_edid.data, length); |
| } |
| |
| /** |
| * kmstest_edid_add_4k: |
| * @edid: an existing valid edid block |
| * @length: length of @edid |
| * @new_edid_ptr: pointer to where the new edid will be placed |
| * @new_length: pointer to the size of the new edid |
| * |
| * Makes a copy of an existing edid block and adds an extension indicating |
| * a HDMI 4K mode in vsdb. |
| */ |
| void kmstest_edid_add_4k(const unsigned char *edid, size_t length, |
| unsigned char *new_edid_ptr[], size_t *new_length) |
| { |
| char vsdb_block_len = 12; |
| struct edid_block new_edid = init_cea_block(edid, length, new_edid_ptr, |
| new_length, vsdb_block_len, |
| 0); |
| int pos = new_edid.pos; |
| |
| /* vsdb block ( id | length ) */ |
| new_edid.data[pos++] = 3 << 5 | (vsdb_block_len - 1); |
| /* registration id */ |
| new_edid.data[pos++] = 0x3; |
| new_edid.data[pos++] = 0xc; |
| new_edid.data[pos++] = 0x0; |
| /* source physical address */ |
| new_edid.data[pos++] = 0x10; |
| new_edid.data[pos++] = 0x00; |
| /* Supports_AI ... etc */ |
| new_edid.data[pos++] = 0x00; |
| /* Max TMDS Clock */ |
| new_edid.data[pos++] = 0x00; |
| /* Latency present, HDMI Video Present */ |
| new_edid.data[pos++] = 0x20; |
| /* HDMI Video */ |
| new_edid.data[pos++] = 0x00; /* 3D present */ |
| |
| /* HDMI MODE LEN -- how many entries */ |
| new_edid.data[pos++] = 0x20; |
| /* 2160p, specified as short descriptor */ |
| new_edid.data[pos++] = 0x01; |
| |
| update_edid_csum(new_edid.data, length); |
| } |
| |
| /** |
| * kmstest_edid_add_audio: |
| * @edid: an existing valid edid block |
| * @length: length of @edid |
| * @new_edid_ptr: pointer to where the new edid will be placed |
| * @new_length: pointer to the size of the new edid |
| * |
| * Makes a copy of an existing edid block and adds an extension indicating |
| * basic audio support and speaker data block. |
| * |
| */ |
| void kmstest_edid_add_audio(const unsigned char *edid, size_t length, |
| unsigned char *new_edid_ptr[], size_t *new_length) |
| { |
| char vsdb_block_len = 10, audio_block_len = 4, spkr_block_len = 4; |
| struct edid_block new_edid = init_cea_block(edid, length, new_edid_ptr, |
| new_length, |
| vsdb_block_len + |
| audio_block_len + |
| spkr_block_len, |
| DTD_SUPPORTS_AUDIO); |
| int pos = new_edid.pos; |
| |
| /* audio block, short audio block descriptors */ |
| new_edid.data[pos++] = (1 << 5) | (audio_block_len - 1); |
| new_edid.data[pos++] = 0x09; /* Audio Format, PCM */ |
| new_edid.data[pos++] = 0x07; /* Frequency, 32, 44.1, 48kHz */ |
| new_edid.data[pos++] = 0x07; /* Bit Rate 16, 20, 24 bit */ |
| |
| |
| /* vsdb block ( id | length ) -- need vsdb as well |
| * otherwise the kernel will fallback to lower clock modes */ |
| new_edid.data[pos++] = 3 << 5 | (vsdb_block_len - 1); |
| /* registration id */ |
| new_edid.data[pos++] = 0x3; |
| new_edid.data[pos++] = 0xc; |
| new_edid.data[pos++] = 0x0; |
| /* source physical address */ |
| new_edid.data[pos++] = 0x10; |
| new_edid.data[pos++] = 0x00; |
| /* Supports_AI ... etc */ |
| new_edid.data[pos++] = 0x00; |
| /* Max TMDS Clock */ |
| new_edid.data[pos++] = 0x00; |
| /* Latency present, HDMI Video Present */ |
| new_edid.data[pos++] = 0x20; |
| /* HDMI Video */ |
| new_edid.data[pos++] = 0x00; /* 3D present */ |
| |
| /* speaker data block */ |
| new_edid.data[pos++] = (4 << 5) | (spkr_block_len - 1); |
| new_edid.data[pos++] = (1 << 5); |
| new_edid.data[pos++] = 0x00; |
| new_edid.data[pos++] = 0x00; |
| |
| update_edid_csum(new_edid.data, length); |
| } |
| |
| /** |
| * kmstest_unset_all_crtcs: |
| * @drm_fd: the DRM fd |
| * @resources: libdrm resources pointer |
| * |
| * Disables all the screens. |
| */ |
| void kmstest_unset_all_crtcs(int drm_fd, drmModeResPtr resources) |
| { |
| int i, rc; |
| |
| for (i = 0; i < resources->count_crtcs; i++) { |
| rc = drmModeSetCrtc(drm_fd, resources->crtcs[i], 0, 0, 0, NULL, |
| 0, NULL); |
| igt_assert(rc == 0); |
| } |
| } |
| |
| /** |
| * kmstest_get_crtc_idx: |
| * @res: the libdrm resources |
| * @crtc_id: the CRTC id |
| * |
| * Get the CRTC index based on its ID. This is useful since a few places of |
| * libdrm deal with CRTC masks. |
| */ |
| int kmstest_get_crtc_idx(drmModeRes *res, uint32_t crtc_id) |
| { |
| int i; |
| |
| for (i = 0; i < res->count_crtcs; i++) |
| if (res->crtcs[i] == crtc_id) |
| return i; |
| |
| igt_assert(false); |
| } |
| |
| static inline uint32_t pipe_select(int pipe) |
| { |
| if (pipe > 1) |
| return pipe << DRM_VBLANK_HIGH_CRTC_SHIFT; |
| else if (pipe > 0) |
| return DRM_VBLANK_SECONDARY; |
| else |
| return 0; |
| } |
| |
| /** |
| * kmstest_get_vblank: |
| * @fd: Opened drm file descriptor |
| * @pipe: Display pipe |
| * @flags: Flags passed to drm_ioctl_wait_vblank |
| * |
| * Blocks or request a signal when a specified vblank event occurs |
| * |
| * Returns 0 on success or non-zero unsigned integer otherwise |
| */ |
| unsigned int kmstest_get_vblank(int fd, int pipe, unsigned int flags) |
| { |
| union drm_wait_vblank vbl; |
| |
| memset(&vbl, 0, sizeof(vbl)); |
| vbl.request.type = DRM_VBLANK_RELATIVE | pipe_select(pipe) | flags; |
| if (drmIoctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl)) |
| return 0; |
| |
| return vbl.reply.sequence; |
| } |
| |
| /** |
| * kmstest_wait_for_pageflip: |
| * @fd: Opened drm file descriptor |
| * |
| * Blocks until pageflip is completed |
| * |
| */ |
| void kmstest_wait_for_pageflip(int fd) |
| { |
| drmEventContext evctx = { .version = 2 }; |
| struct timeval timeout = { .tv_sec = 0, .tv_usec = 50000 }; |
| fd_set fds; |
| int ret; |
| |
| /* Wait for pageflip completion, then consume event on fd */ |
| FD_ZERO(&fds); |
| FD_SET(fd, &fds); |
| do { |
| ret = select(fd + 1, &fds, NULL, NULL, &timeout); |
| } while (ret < 0 && errno == EINTR); |
| igt_assert_eq(ret, 1); |
| igt_assert(drmHandleEvent(fd, &evctx) == 0); |
| } |
| |
| static void get_plane(char *str, int type, struct kmstest_plane *plane) |
| { |
| int ret; |
| char buf[256]; |
| |
| plane->type = type; |
| ret = sscanf(str + 12, "%d%*c %*s %[^n]s", |
| &plane->id, |
| buf); |
| igt_assert_eq(ret, 2); |
| |
| ret = sscanf(buf + 9, "%4d%*c%4d%*c", &plane->pos_x, &plane->pos_y); |
| igt_assert_eq(ret, 2); |
| |
| ret = sscanf(buf + 30, "%4d%*c%4d%*c", &plane->width, &plane->height); |
| igt_assert_eq(ret, 2); |
| } |
| |
| static int parse_planes(FILE *fid, struct kmstest_plane *planes) |
| { |
| char tmp[256]; |
| int n_planes; |
| |
| n_planes = 0; |
| while (fgets(tmp, 256, fid) != NULL) { |
| if (strstr(tmp, "type=PRI") != NULL) { |
| if (planes) { |
| get_plane(tmp, DRM_PLANE_TYPE_PRIMARY, &planes[n_planes]); |
| planes[n_planes].index = n_planes; |
| } |
| n_planes++; |
| } else if (strstr(tmp, "type=OVL") != NULL) { |
| if (planes) { |
| get_plane(tmp, DRM_PLANE_TYPE_OVERLAY, &planes[n_planes]); |
| planes[n_planes].index = n_planes; |
| } |
| n_planes++; |
| } else if (strstr(tmp, "type=CUR") != NULL) { |
| if (planes) { |
| get_plane(tmp, DRM_PLANE_TYPE_CURSOR, &planes[n_planes]); |
| planes[n_planes].index = n_planes; |
| } |
| n_planes++; |
| break; |
| } |
| } |
| |
| return n_planes; |
| } |
| |
| static void parse_crtc(char *info, struct kmstest_crtc *crtc) |
| { |
| char buf[256]; |
| int ret; |
| char pipe; |
| |
| ret = sscanf(info + 4, "%d%*c %*s %c%*c %*s %s%*c", |
| &crtc->id, &pipe, buf); |
| igt_assert_eq(ret, 3); |
| |
| crtc->pipe = kmstest_pipe_to_index(pipe); |
| igt_assert(crtc->pipe >= 0); |
| |
| ret = sscanf(buf + 6, "%d%*c%d%*c", |
| &crtc->width, &crtc->height); |
| igt_assert_eq(ret, 2); |
| } |
| |
| static void kmstest_get_crtc(int device, enum pipe pipe, struct kmstest_crtc *crtc) |
| { |
| char tmp[256]; |
| FILE *file; |
| int ncrtc; |
| int line; |
| long int n; |
| int fd; |
| |
| fd = igt_debugfs_open(device, "i915_display_info", O_RDONLY); |
| file = fdopen(fd, "r"); |
| igt_skip_on(file == NULL); |
| |
| ncrtc = 0; |
| line = 0; |
| while (fgets(tmp, 256, file) != NULL) { |
| if ((strstr(tmp, "CRTC") != NULL) && (line > 0)) { |
| if (strstr(tmp, "active=yes") != NULL) { |
| crtc->active = true; |
| parse_crtc(tmp, crtc); |
| |
| n = ftell(file); |
| crtc->n_planes = parse_planes(file, NULL); |
| igt_assert_lt(0, crtc->n_planes); |
| crtc->planes = calloc(crtc->n_planes, sizeof(*crtc->planes)); |
| igt_assert_f(crtc->planes, "Failed to allocate memory for %d planes\n", crtc->n_planes); |
| |
| fseek(file, n, SEEK_SET); |
| parse_planes(file, crtc->planes); |
| |
| if (crtc->pipe != pipe) { |
| free(crtc->planes); |
| } else { |
| ncrtc++; |
| break; |
| } |
| } |
| } |
| |
| line++; |
| } |
| |
| fclose(file); |
| close(fd); |
| |
| igt_assert(ncrtc == 1); |
| } |
| |
| /** |
| * igt_assert_plane_visible: |
| * @fd: Opened file descriptor |
| * @pipe: Display pipe |
| * @visibility: Boolean parameter to test against the plane's current visibility state |
| * |
| * Asserts only if the plane's visibility state matches the status being passed by @visibility |
| */ |
| void igt_assert_plane_visible(int fd, enum pipe pipe, bool visibility) |
| { |
| struct kmstest_crtc crtc; |
| int i; |
| bool visible; |
| |
| kmstest_get_crtc(fd, pipe, &crtc); |
| |
| visible = true; |
| for (i = 0; i < crtc.n_planes; i++) { |
| if (crtc.planes[i].type == DRM_PLANE_TYPE_PRIMARY) |
| continue; |
| |
| if (crtc.planes[i].pos_x > crtc.width) { |
| visible = false; |
| break; |
| } else if (crtc.planes[i].pos_y > crtc.height) { |
| visible = false; |
| break; |
| } |
| } |
| |
| free(crtc.planes); |
| igt_assert_eq(visible, visibility); |
| } |
| |
| /* |
| * A small modeset API |
| */ |
| |
| #define LOG_SPACES " " |
| #define LOG_N_SPACES (sizeof(LOG_SPACES) - 1) |
| |
| #define LOG_INDENT(d, section) \ |
| do { \ |
| igt_display_log(d, "%s {\n", section); \ |
| igt_display_log_shift(d, 1); \ |
| } while (0) |
| #define LOG_UNINDENT(d) \ |
| do { \ |
| igt_display_log_shift(d, -1); \ |
| igt_display_log(d, "}\n"); \ |
| } while (0) |
| #define LOG(d, fmt, ...) igt_display_log(d, fmt, ## __VA_ARGS__) |
| |
| static void __attribute__((format(printf, 2, 3))) |
| igt_display_log(igt_display_t *display, const char *fmt, ...) |
| { |
| va_list args; |
| int i; |
| |
| va_start(args, fmt); |
| igt_debug("display: "); |
| for (i = 0; i < display->log_shift; i++) |
| igt_debug("%s", LOG_SPACES); |
| igt_vlog(IGT_LOG_DOMAIN, IGT_LOG_DEBUG, fmt, args); |
| va_end(args); |
| } |
| |
| static void igt_display_log_shift(igt_display_t *display, int shift) |
| { |
| display->log_shift += shift; |
| igt_assert(display->log_shift >= 0); |
| } |
| |
| static void igt_output_refresh(igt_output_t *output) |
| { |
| igt_display_t *display = output->display; |
| unsigned long crtc_idx_mask = 0; |
| |
| if (output->pending_pipe != PIPE_NONE) |
| crtc_idx_mask = 1 << output->pending_pipe; |
| |
| kmstest_free_connector_config(&output->config); |
| |
| _kmstest_connector_config(display->drm_fd, output->id, crtc_idx_mask, |
| &output->config, output->force_reprobe); |
| output->force_reprobe = false; |
| |
| if (!output->name && output->config.connector) { |
| drmModeConnector *c = output->config.connector; |
| |
| igt_assert_neq(asprintf(&output->name, "%s-%d", kmstest_connector_type_str(c->connector_type), c->connector_type_id), |
| -1); |
| } |
| |
| if (output->config.connector) |
| igt_atomic_fill_connector_props(display, output, |
| IGT_NUM_CONNECTOR_PROPS, igt_connector_prop_names); |
| |
| LOG(display, "%s: Selecting pipe %s\n", output->name, |
| kmstest_pipe_name(output->pending_pipe)); |
| } |
| |
| static int |
| igt_plane_set_property(igt_plane_t *plane, uint32_t prop_id, uint64_t value) |
| { |
| igt_pipe_t *pipe = plane->pipe; |
| igt_display_t *display = pipe->display; |
| |
| return drmModeObjectSetProperty(display->drm_fd, plane->drm_plane->plane_id, |
| DRM_MODE_OBJECT_PLANE, prop_id, value); |
| } |
| |
| /* |
| * Walk a plane's property list to determine its type. If we don't |
| * find a type property, then the kernel doesn't support universal |
| * planes and we know the plane is an overlay/sprite. |
| */ |
| static int get_drm_plane_type(int drm_fd, uint32_t plane_id) |
| { |
| uint64_t value; |
| bool has_prop; |
| |
| has_prop = kmstest_get_property(drm_fd, plane_id, DRM_MODE_OBJECT_PLANE, |
| "type", NULL, &value, NULL); |
| if (has_prop) |
| return (int)value; |
| |
| return DRM_PLANE_TYPE_OVERLAY; |
| } |
| |
| static void igt_plane_reset(igt_plane_t *plane) |
| { |
| /* Reset src coordinates. */ |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_X, 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_Y, 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_W, 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_H, 0); |
| |
| /* Reset crtc coordinates. */ |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_X, 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_Y, 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_W, 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_H, 0); |
| |
| /* Reset binding to fb and crtc. */ |
| igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, 0); |
| |
| if (igt_plane_has_prop(plane, IGT_PLANE_COLOR_ENCODING)) |
| igt_plane_set_prop_enum(plane, IGT_PLANE_COLOR_ENCODING, |
| igt_color_encoding_to_str(IGT_COLOR_YCBCR_BT601)); |
| |
| if (igt_plane_has_prop(plane, IGT_PLANE_COLOR_RANGE)) |
| igt_plane_set_prop_enum(plane, IGT_PLANE_COLOR_RANGE, |
| igt_color_range_to_str(IGT_COLOR_YCBCR_LIMITED_RANGE)); |
| |
| /* Use default rotation */ |
| if (igt_plane_has_prop(plane, IGT_PLANE_ROTATION)) |
| igt_plane_set_prop_value(plane, IGT_PLANE_ROTATION, IGT_ROTATION_0); |
| |
| igt_plane_clear_prop_changed(plane, IGT_PLANE_IN_FENCE_FD); |
| plane->values[IGT_PLANE_IN_FENCE_FD] = ~0ULL; |
| plane->gem_handle = 0; |
| } |
| |
| static void igt_pipe_reset(igt_pipe_t *pipe) |
| { |
| igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, 0); |
| igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_ACTIVE, 0); |
| igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR); |
| |
| pipe->out_fence_fd = -1; |
| } |
| |
| static void igt_output_reset(igt_output_t *output) |
| { |
| output->pending_pipe = PIPE_NONE; |
| output->use_override_mode = false; |
| memset(&output->override_mode, 0, sizeof(output->override_mode)); |
| |
| igt_output_set_prop_value(output, IGT_CONNECTOR_CRTC_ID, 0); |
| |
| if (igt_output_has_prop(output, IGT_CONNECTOR_BROADCAST_RGB)) |
| igt_output_set_prop_value(output, IGT_CONNECTOR_BROADCAST_RGB, |
| BROADCAST_RGB_FULL); |
| } |
| |
| /** |
| * igt_display_reset: |
| * @display: a pointer to an #igt_display_t structure |
| * |
| * Reset basic pipes, connectors and planes on @display back to default values. |
| * In particular, the following properties will be reset: |
| * |
| * For outputs: |
| * - %IGT_CONNECTOR_CRTC_ID |
| * - %IGT_CONNECTOR_BROADCAST_RGB (if applicable) |
| * - igt_output_override_mode() to default. |
| * |
| * For pipes: |
| * - %IGT_CRTC_MODE_ID (leaked) |
| * - %IGT_CRTC_ACTIVE |
| * - %IGT_CRTC_OUT_FENCE_PTR |
| * |
| * For planes: |
| * - %IGT_PLANE_SRC_* |
| * - %IGT_PLANE_CRTC_* |
| * - %IGT_PLANE_FB_ID |
| * - %IGT_PLANE_CRTC_ID |
| * - %IGT_PLANE_ROTATION |
| * - %IGT_PLANE_IN_FENCE_FD |
| */ |
| void igt_display_reset(igt_display_t *display) |
| { |
| enum pipe pipe; |
| int i; |
| |
| /* |
| * Allow resetting rotation on all planes, which is normally |
| * prohibited on the primary and cursor plane for legacy commits. |
| */ |
| display->first_commit = true; |
| |
| for_each_pipe(display, pipe) { |
| igt_pipe_t *pipe_obj = &display->pipes[pipe]; |
| igt_plane_t *plane; |
| |
| for_each_plane_on_pipe(display, pipe, plane) |
| igt_plane_reset(plane); |
| |
| igt_pipe_reset(pipe_obj); |
| } |
| |
| for (i = 0; i < display->n_outputs; i++) { |
| igt_output_t *output = &display->outputs[i]; |
| |
| igt_output_reset(output); |
| } |
| } |
| |
| static void igt_fill_plane_format_mod(igt_display_t *display, igt_plane_t *plane); |
| static void igt_fill_display_format_mod(igt_display_t *display); |
| |
| /** |
| * igt_display_require: |
| * @display: a pointer to an #igt_display_t structure |
| * @drm_fd: a drm file descriptor |
| * |
| * Initialize @display and allocate the various resources required. Use |
| * #igt_display_fini to release the resources when they are no longer required. |
| * |
| * This function automatically skips if the kernel driver doesn't support any |
| * CRTC or outputs. |
| */ |
| void igt_display_require(igt_display_t *display, int drm_fd) |
| { |
| drmModeRes *resources; |
| drmModePlaneRes *plane_resources; |
| int i; |
| |
| memset(display, 0, sizeof(igt_display_t)); |
| |
| LOG_INDENT(display, "init"); |
| |
| display->drm_fd = drm_fd; |
| |
| resources = drmModeGetResources(display->drm_fd); |
| if (!resources) |
| goto out; |
| |
| /* |
| * We cache the number of pipes, that number is a physical limit of the |
| * hardware and cannot change of time (for now, at least). |
| */ |
| display->n_pipes = resources->count_crtcs; |
| display->pipes = calloc(sizeof(igt_pipe_t), display->n_pipes); |
| igt_assert_f(display->pipes, "Failed to allocate memory for %d pipes\n", display->n_pipes); |
| |
| drmSetClientCap(drm_fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 1); |
| if (drmSetClientCap(drm_fd, DRM_CLIENT_CAP_ATOMIC, 1) == 0) |
| display->is_atomic = 1; |
| |
| plane_resources = drmModeGetPlaneResources(display->drm_fd); |
| igt_assert(plane_resources); |
| |
| for_each_pipe(display, i) { |
| igt_pipe_t *pipe = &display->pipes[i]; |
| igt_plane_t *plane; |
| int p = 1; |
| int j, type; |
| uint8_t last_plane = 0, n_planes = 0; |
| |
| pipe->crtc_id = resources->crtcs[i]; |
| pipe->display = display; |
| pipe->pipe = i; |
| pipe->plane_cursor = -1; |
| pipe->plane_primary = -1; |
| pipe->planes = NULL; |
| |
| igt_fill_pipe_props(display, pipe, IGT_NUM_CRTC_PROPS, igt_crtc_prop_names); |
| |
| /* count number of valid planes */ |
| for (j = 0; j < plane_resources->count_planes; j++) { |
| drmModePlane *drm_plane; |
| |
| drm_plane = drmModeGetPlane(display->drm_fd, |
| plane_resources->planes[j]); |
| igt_assert(drm_plane); |
| |
| if (drm_plane->possible_crtcs & (1 << i)) |
| n_planes++; |
| |
| drmModeFreePlane(drm_plane); |
| } |
| |
| igt_assert_lt(0, n_planes); |
| pipe->planes = calloc(sizeof(igt_plane_t), n_planes); |
| igt_assert_f(pipe->planes, "Failed to allocate memory for %d planes\n", n_planes); |
| last_plane = n_planes - 1; |
| |
| /* add the planes that can be used with that pipe */ |
| for (j = 0; j < plane_resources->count_planes; j++) { |
| drmModePlane *drm_plane; |
| |
| drm_plane = drmModeGetPlane(display->drm_fd, |
| plane_resources->planes[j]); |
| igt_assert(drm_plane); |
| |
| if (!(drm_plane->possible_crtcs & (1 << i))) { |
| drmModeFreePlane(drm_plane); |
| continue; |
| } |
| |
| type = get_drm_plane_type(display->drm_fd, |
| plane_resources->planes[j]); |
| |
| if (type == DRM_PLANE_TYPE_PRIMARY && pipe->plane_primary == -1) { |
| plane = &pipe->planes[0]; |
| plane->index = 0; |
| pipe->plane_primary = 0; |
| } else if (type == DRM_PLANE_TYPE_CURSOR && pipe->plane_cursor == -1) { |
| plane = &pipe->planes[last_plane]; |
| plane->index = last_plane; |
| pipe->plane_cursor = last_plane; |
| display->has_cursor_plane = true; |
| } else { |
| plane = &pipe->planes[p]; |
| plane->index = p++; |
| } |
| |
| igt_assert_f(plane->index < n_planes, "n_planes < plane->index failed\n"); |
| plane->type = type; |
| plane->pipe = pipe; |
| plane->drm_plane = drm_plane; |
| plane->values[IGT_PLANE_IN_FENCE_FD] = ~0ULL; |
| |
| igt_fill_plane_props(display, plane, IGT_NUM_PLANE_PROPS, igt_plane_prop_names); |
| |
| igt_fill_plane_format_mod(display, plane); |
| } |
| |
| /* |
| * At the bare minimum, we should expect to have a primary |
| * plane, and it must be in slot 0. |
| */ |
| igt_assert_eq(pipe->plane_primary, 0); |
| |
| /* Check that we filled every slot exactly once */ |
| if (display->has_cursor_plane) |
| igt_assert_eq(p, last_plane); |
| else |
| igt_assert_eq(p, n_planes); |
| |
| pipe->n_planes = n_planes; |
| } |
| |
| igt_fill_display_format_mod(display); |
| |
| /* |
| * The number of connectors is set, so we just initialize the outputs |
| * array in _init(). This may change when we need dynamic connectors |
| * (say DisplayPort MST). |
| */ |
| display->n_outputs = resources->count_connectors; |
| display->outputs = calloc(display->n_outputs, sizeof(igt_output_t)); |
| igt_assert_f(display->outputs, "Failed to allocate memory for %d outputs\n", display->n_outputs); |
| |
| for (i = 0; i < display->n_outputs; i++) { |
| igt_output_t *output = &display->outputs[i]; |
| drmModeConnector *connector; |
| |
| /* |
| * We don't assign each output a pipe unless |
| * a pipe is set with igt_output_set_pipe(). |
| */ |
| output->pending_pipe = PIPE_NONE; |
| output->id = resources->connectors[i]; |
| output->display = display; |
| |
| igt_output_refresh(output); |
| |
| connector = output->config.connector; |
| if (connector && (!connector->count_modes || |
| connector->connection == DRM_MODE_UNKNOWNCONNECTION)) { |
| output->force_reprobe = true; |
| igt_output_refresh(output); |
| } |
| } |
| |
| drmModeFreePlaneResources(plane_resources); |
| drmModeFreeResources(resources); |
| |
| /* Set reasonable default values for every object in the display. */ |
| igt_display_reset(display); |
| |
| out: |
| LOG_UNINDENT(display); |
| |
| if (display->n_pipes && display->n_outputs) |
| igt_enable_connectors(drm_fd); |
| else |
| igt_skip("No KMS driver or no outputs, pipes: %d, outputs: %d\n", |
| display->n_pipes, display->n_outputs); |
| } |
| |
| /** |
| * igt_display_get_n_pipes: |
| * @display: A pointer to an #igt_display_t structure |
| * |
| * Returns total number of pipes for the given @display |
| */ |
| int igt_display_get_n_pipes(igt_display_t *display) |
| { |
| return display->n_pipes; |
| } |
| |
| /** |
| * igt_display_require_output: |
| * @display: A pointer to an #igt_display_t structure |
| * |
| * Checks whether there's a valid @pipe/@output combination for the given @display |
| * Skips test if a valid combination of @pipe and @output is not found |
| */ |
| void igt_display_require_output(igt_display_t *display) |
| { |
| enum pipe pipe; |
| igt_output_t *output; |
| |
| for_each_pipe_with_valid_output(display, pipe, output) |
| return; |
| |
| igt_skip("No valid crtc/connector combinations found.\n"); |
| } |
| |
| /** |
| * igt_display_require_output_on_pipe: |
| * @display: A pointer to an #igt_display_t structure |
| * @pipe: Display pipe |
| * |
| * Checks whether there's a valid @pipe/@output combination for the given @display and @pipe |
| * Skips test if a valid @pipe is not found |
| */ |
| void igt_display_require_output_on_pipe(igt_display_t *display, enum pipe pipe) |
| { |
| igt_output_t *output; |
| |
| igt_skip_on_f(pipe >= igt_display_get_n_pipes(display), |
| "Pipe %s does not exist.\n", kmstest_pipe_name(pipe)); |
| |
| for_each_valid_output_on_pipe(display, pipe, output) |
| return; |
| |
| igt_skip("No valid connector found on pipe %s\n", kmstest_pipe_name(pipe)); |
| } |
| |
| /** |
| * igt_output_from_connector: |
| * @display: a pointer to an #igt_display_t structure |
| * @connector: a pointer to a drmModeConnector |
| * |
| * Finds the output corresponding to the given connector |
| * |
| * Returns: A #igt_output_t structure configured to use the connector, or NULL |
| * if none was found |
| */ |
| igt_output_t *igt_output_from_connector(igt_display_t *display, |
| drmModeConnector *connector) |
| { |
| igt_output_t *output, *found = NULL; |
| int i; |
| |
| for (i = 0; i < display->n_outputs; i++) { |
| output = &display->outputs[i]; |
| |
| if (output->config.connector && |
| output->config.connector->connector_id == |
| connector->connector_id) { |
| found = output; |
| break; |
| } |
| } |
| |
| return found; |
| } |
| |
| static void igt_pipe_fini(igt_pipe_t *pipe) |
| { |
| int i; |
| |
| for (i = 0; i < pipe->n_planes; i++) { |
| igt_plane_t *plane = &pipe->planes[i]; |
| |
| if (plane->drm_plane) { |
| drmModeFreePlane(plane->drm_plane); |
| plane->drm_plane = NULL; |
| } |
| } |
| |
| free(pipe->planes); |
| pipe->planes = NULL; |
| |
| if (pipe->out_fence_fd != -1) |
| close(pipe->out_fence_fd); |
| } |
| |
| static void igt_output_fini(igt_output_t *output) |
| { |
| kmstest_free_connector_config(&output->config); |
| free(output->name); |
| output->name = NULL; |
| } |
| |
| /** |
| * igt_display_fini: |
| * @display: a pointer to an #igt_display_t structure |
| * |
| * Release any resources associated with @display. This does not free @display |
| * itself. |
| */ |
| void igt_display_fini(igt_display_t *display) |
| { |
| int i; |
| |
| for (i = 0; i < display->n_pipes; i++) |
| igt_pipe_fini(&display->pipes[i]); |
| |
| for (i = 0; i < display->n_outputs; i++) |
| igt_output_fini(&display->outputs[i]); |
| free(display->outputs); |
| display->outputs = NULL; |
| free(display->pipes); |
| display->pipes = NULL; |
| } |
| |
| static void igt_display_refresh(igt_display_t *display) |
| { |
| igt_output_t *output; |
| int i; |
| |
| unsigned long pipes_in_use = 0; |
| |
| /* Check that two outputs aren't trying to use the same pipe */ |
| for (i = 0; i < display->n_outputs; i++) { |
| output = &display->outputs[i]; |
| |
| if (output->pending_pipe != PIPE_NONE) { |
| if (pipes_in_use & (1 << output->pending_pipe)) |
| goto report_dup; |
| |
| pipes_in_use |= 1 << output->pending_pipe; |
| } |
| |
| if (output->force_reprobe) |
| igt_output_refresh(output); |
| } |
| |
| return; |
| |
| report_dup: |
| for (; i > 0; i--) { |
| igt_output_t *b = &display->outputs[i - 1]; |
| |
| igt_assert_f(output->pending_pipe != |
| b->pending_pipe, |
| "%s and %s are both trying to use pipe %s\n", |
| igt_output_name(output), igt_output_name(b), |
| kmstest_pipe_name(output->pending_pipe)); |
| } |
| } |
| |
| static igt_pipe_t *igt_output_get_driving_pipe(igt_output_t *output) |
| { |
| igt_display_t *display = output->display; |
| enum pipe pipe; |
| |
| if (output->pending_pipe == PIPE_NONE) { |
| /* |
| * The user hasn't specified a pipe to use, return none. |
| */ |
| return NULL; |
| } else { |
| /* |
| * Otherwise, return the pending pipe (ie the pipe that should |
| * drive this output after the commit() |
| */ |
| pipe = output->pending_pipe; |
| } |
| |
| igt_assert(pipe >= 0 && pipe < display->n_pipes); |
| |
| return &display->pipes[pipe]; |
| } |
| |
| static igt_plane_t *igt_pipe_get_plane(igt_pipe_t *pipe, int plane_idx) |
| { |
| igt_require_f(plane_idx >= 0 && plane_idx < pipe->n_planes, |
| "Valid pipe->planes plane_idx not found, plane_idx=%d n_planes=%d", |
| plane_idx, pipe->n_planes); |
| |
| return &pipe->planes[plane_idx]; |
| } |
| |
| /** |
| * igt_pipe_get_plane_type: |
| * @pipe: Target pipe |
| * @plane_type: Cursor, primary or an overlay plane |
| * |
| * Finds a valid plane type for the given @pipe otherwise |
| * it skips the test if the right combination of @pipe/@plane_type is not found |
| * |
| * Returns: A #igt_plane_t structure that matches the requested plane type |
| */ |
| igt_plane_t *igt_pipe_get_plane_type(igt_pipe_t *pipe, int plane_type) |
| { |
| int i, plane_idx = -1; |
| |
| switch(plane_type) { |
| case DRM_PLANE_TYPE_CURSOR: |
| plane_idx = pipe->plane_cursor; |
| break; |
| case DRM_PLANE_TYPE_PRIMARY: |
| plane_idx = pipe->plane_primary; |
| break; |
| case DRM_PLANE_TYPE_OVERLAY: |
| for(i = 0; i < pipe->n_planes; i++) |
| if (pipe->planes[i].type == DRM_PLANE_TYPE_OVERLAY) |
| plane_idx = i; |
| break; |
| default: |
| break; |
| } |
| |
| igt_require_f(plane_idx >= 0 && plane_idx < pipe->n_planes, |
| "Valid pipe->planes idx not found. plane_idx=%d plane_type=%d n_planes=%d\n", |
| plane_idx, plane_type, pipe->n_planes); |
| |
| return &pipe->planes[plane_idx]; |
| } |
| |
| static bool output_is_internal_panel(igt_output_t *output) |
| { |
| switch (output->config.connector->connector_type) { |
| case DRM_MODE_CONNECTOR_LVDS: |
| case DRM_MODE_CONNECTOR_eDP: |
| case DRM_MODE_CONNECTOR_DSI: |
| case DRM_MODE_CONNECTOR_DPI: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| igt_output_t **__igt_pipe_populate_outputs(igt_display_t *display, igt_output_t **chosen_outputs) |
| { |
| unsigned full_pipe_mask = (1 << (display->n_pipes)) - 1, assigned_pipes = 0; |
| igt_output_t *output; |
| int i, j; |
| |
| memset(chosen_outputs, 0, sizeof(*chosen_outputs) * display->n_pipes); |
| |
| /* |
| * Try to assign all outputs to the first available CRTC for |
| * it, start with the outputs restricted to 1 pipe, then increase |
| * number of pipes until we assign connectors to all pipes. |
| */ |
| for (i = 0; i <= display->n_pipes; i++) { |
| for_each_connected_output(display, output) { |
| uint32_t pipe_mask = output->config.valid_crtc_idx_mask & full_pipe_mask; |
| bool found = false; |
| |
| if (output_is_internal_panel(output)) { |
| /* |
| * Internal panel should be assigned to pipe A |
| * if possible, so make sure they're enumerated |
| * first. |
| */ |
| |
| if (i) |
| continue; |
| } else if (__builtin_popcount(pipe_mask) != i) |
| continue; |
| |
| for (j = 0; j < display->n_pipes; j++) { |
| bool pipe_assigned = assigned_pipes & (1 << j); |
| |
| if (pipe_assigned || !(pipe_mask & (1 << j))) |
| continue; |
| |
| if (!found) { |
| /* We found an unassigned pipe, use it! */ |
| found = true; |
| assigned_pipes |= 1 << j; |
| chosen_outputs[j] = output; |
| } else if (!chosen_outputs[j] || |
| /* |
| * Overwrite internal panel if not assigned, |
| * external outputs are faster to do modesets |
| */ |
| output_is_internal_panel(chosen_outputs[j])) |
| chosen_outputs[j] = output; |
| } |
| |
| if (!found) |
| igt_warn("Output %s could not be assigned to a pipe\n", |
| igt_output_name(output)); |
| } |
| } |
| |
| return chosen_outputs; |
| } |
| |
| /** |
| * igt_get_single_output_for_pipe: |
| * @display: a pointer to an #igt_display_t structure |
| * @pipe: The pipe for which an #igt_output_t must be returned. |
| * |
| * Get a compatible output for a pipe. |
| * |
| * Returns: A compatible output for a given pipe, or NULL. |
| */ |
| igt_output_t *igt_get_single_output_for_pipe(igt_display_t *display, enum pipe pipe) |
| { |
| igt_output_t *chosen_outputs[display->n_pipes]; |
| |
| igt_assert(pipe != PIPE_NONE); |
| igt_require(pipe < display->n_pipes); |
| |
| __igt_pipe_populate_outputs(display, chosen_outputs); |
| |
| return chosen_outputs[pipe]; |
| } |
| |
| static igt_output_t *igt_pipe_get_output(igt_pipe_t *pipe) |
| { |
| igt_display_t *display = pipe->display; |
| int i; |
| |
| for (i = 0; i < display->n_outputs; i++) { |
| igt_output_t *output = &display->outputs[i]; |
| |
| if (output->pending_pipe == pipe->pipe) |
| return output; |
| } |
| |
| return NULL; |
| } |
| |
| static uint32_t igt_plane_get_fb_id(igt_plane_t *plane) |
| { |
| return plane->values[IGT_PLANE_FB_ID]; |
| } |
| |
| #define CHECK_RETURN(r, fail) { \ |
| if (r && !fail) \ |
| return r; \ |
| igt_assert_eq(r, 0); \ |
| } |
| |
| /* |
| * Add position and fb changes of a plane to the atomic property set |
| */ |
| static void |
| igt_atomic_prepare_plane_commit(igt_plane_t *plane, igt_pipe_t *pipe, |
| drmModeAtomicReq *req) |
| { |
| igt_display_t *display = pipe->display; |
| int i; |
| |
| igt_assert(plane->drm_plane); |
| |
| LOG(display, |
| "populating plane data: %s.%d, fb %u\n", |
| kmstest_pipe_name(pipe->pipe), |
| plane->index, |
| igt_plane_get_fb_id(plane)); |
| |
| for (i = 0; i < IGT_NUM_PLANE_PROPS; i++) { |
| if (!igt_plane_is_prop_changed(plane, i)) |
| continue; |
| |
| /* it's an error to try an unsupported feature */ |
| igt_assert(plane->props[i]); |
| |
| igt_debug("plane %s.%d: Setting property \"%s\" to 0x%"PRIx64"/%"PRIi64"\n", |
| kmstest_pipe_name(pipe->pipe), plane->index, igt_plane_prop_names[i], |
| plane->values[i], plane->values[i]); |
| |
| igt_assert_lt(0, drmModeAtomicAddProperty(req, plane->drm_plane->plane_id, |
| plane->props[i], |
| plane->values[i])); |
| } |
| } |
| |
| /* |
| * Properties that can be changed through legacy SetProperty: |
| * - Obviously not the XYWH SRC/CRTC coordinates. |
| * - Not CRTC_ID or FENCE_ID, done through SetPlane. |
| * - Can't set IN_FENCE_FD, that would be silly. |
| * |
| * Theoretically the above can all be set through the legacy path |
| * with the atomic cap set, but that's not how our legacy plane |
| * commit behaves, so blacklist it by default. |
| */ |
| #define LEGACY_PLANE_COMMIT_MASK \ |
| (((1ULL << IGT_NUM_PLANE_PROPS) - 1) & \ |
| ~(IGT_PLANE_COORD_CHANGED_MASK | \ |
| (1ULL << IGT_PLANE_FB_ID) | \ |
| (1ULL << IGT_PLANE_CRTC_ID) | \ |
| (1ULL << IGT_PLANE_IN_FENCE_FD))) |
| |
| /* |
| * Commit position and fb changes to a DRM plane via the SetPlane ioctl; if the |
| * DRM call to program the plane fails, we'll either fail immediately (for |
| * tests that expect the commit to succeed) or return the failure code (for |
| * tests that expect a specific error code). |
| */ |
| static int igt_drm_plane_commit(igt_plane_t *plane, |
| igt_pipe_t *pipe, |
| bool fail_on_error) |
| { |
| igt_display_t *display = pipe->display; |
| uint32_t fb_id, crtc_id; |
| int ret, i; |
| uint32_t src_x; |
| uint32_t src_y; |
| uint32_t src_w; |
| uint32_t src_h; |
| int32_t crtc_x; |
| int32_t crtc_y; |
| uint32_t crtc_w; |
| uint32_t crtc_h; |
| uint64_t changed_mask; |
| bool setplane = |
| igt_plane_is_prop_changed(plane, IGT_PLANE_FB_ID) || |
| plane->changed & IGT_PLANE_COORD_CHANGED_MASK; |
| |
| igt_assert(plane->drm_plane); |
| |
| fb_id = igt_plane_get_fb_id(plane); |
| crtc_id = pipe->crtc_id; |
| |
| if (setplane && fb_id == 0) { |
| LOG(display, |
| "SetPlane pipe %s, plane %d, disabling\n", |
| kmstest_pipe_name(pipe->pipe), |
| plane->index); |
| |
| ret = drmModeSetPlane(display->drm_fd, |
| plane->drm_plane->plane_id, |
| crtc_id, |
| fb_id, |
| 0, /* flags */ |
| 0, 0, /* crtc_x, crtc_y */ |
| 0, 0, /* crtc_w, crtc_h */ |
| IGT_FIXED(0,0), /* src_x */ |
| IGT_FIXED(0,0), /* src_y */ |
| IGT_FIXED(0,0), /* src_w */ |
| IGT_FIXED(0,0) /* src_h */); |
| |
| CHECK_RETURN(ret, fail_on_error); |
| } else if (setplane) { |
| src_x = plane->values[IGT_PLANE_SRC_X]; |
| src_y = plane->values[IGT_PLANE_SRC_Y]; |
| src_w = plane->values[IGT_PLANE_SRC_W]; |
| src_h = plane->values[IGT_PLANE_SRC_H]; |
| crtc_x = plane->values[IGT_PLANE_CRTC_X]; |
| crtc_y = plane->values[IGT_PLANE_CRTC_Y]; |
| crtc_w = plane->values[IGT_PLANE_CRTC_W]; |
| crtc_h = plane->values[IGT_PLANE_CRTC_H]; |
| |
| LOG(display, |
| "SetPlane %s.%d, fb %u, src = (%d, %d) " |
| "%ux%u dst = (%u, %u) %ux%u\n", |
| kmstest_pipe_name(pipe->pipe), |
| plane->index, |
| fb_id, |
| src_x >> 16, src_y >> 16, src_w >> 16, src_h >> 16, |
| crtc_x, crtc_y, crtc_w, crtc_h); |
| |
| ret = drmModeSetPlane(display->drm_fd, |
| plane->drm_plane->plane_id, |
| crtc_id, |
| fb_id, |
| 0, /* flags */ |
| crtc_x, crtc_y, |
| crtc_w, crtc_h, |
| src_x, src_y, |
| src_w, src_h); |
| |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| changed_mask = plane->changed & LEGACY_PLANE_COMMIT_MASK; |
| |
| for (i = 0; i < IGT_NUM_PLANE_PROPS; i++) { |
| if (!(changed_mask & (1 << i))) |
| continue; |
| |
| LOG(display, "SetProp plane %s.%d \"%s\" to 0x%"PRIx64"/%"PRIi64"\n", |
| kmstest_pipe_name(pipe->pipe), plane->index, igt_plane_prop_names[i], |
| plane->values[i], plane->values[i]); |
| |
| igt_assert(plane->props[i]); |
| |
| ret = igt_plane_set_property(plane, |
| plane->props[i], |
| plane->values[i]); |
| |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Commit position and fb changes to a cursor via legacy ioctl's. If commit |
| * fails, we'll either fail immediately (for tests that expect the commit to |
| * succeed) or return the failure code (for tests that expect a specific error |
| * code). |
| */ |
| static int igt_cursor_commit_legacy(igt_plane_t *cursor, |
| igt_pipe_t *pipe, |
| bool fail_on_error) |
| { |
| igt_display_t *display = pipe->display; |
| uint32_t crtc_id = pipe->crtc_id; |
| int ret; |
| |
| if (igt_plane_is_prop_changed(cursor, IGT_PLANE_FB_ID)) { |
| if (cursor->gem_handle) |
| LOG(display, |
| "SetCursor pipe %s, fb %u %dx%d\n", |
| kmstest_pipe_name(pipe->pipe), |
| cursor->gem_handle, |
| (unsigned)cursor->values[IGT_PLANE_CRTC_W], |
| (unsigned)cursor->values[IGT_PLANE_CRTC_H]); |
| else |
| LOG(display, |
| "SetCursor pipe %s, disabling\n", |
| kmstest_pipe_name(pipe->pipe)); |
| |
| ret = drmModeSetCursor(display->drm_fd, crtc_id, |
| cursor->gem_handle, |
| cursor->values[IGT_PLANE_CRTC_W], |
| cursor->values[IGT_PLANE_CRTC_H]); |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| if (igt_plane_is_prop_changed(cursor, IGT_PLANE_CRTC_X) || |
| igt_plane_is_prop_changed(cursor, IGT_PLANE_CRTC_Y)) { |
| int x = cursor->values[IGT_PLANE_CRTC_X]; |
| int y = cursor->values[IGT_PLANE_CRTC_Y]; |
| |
| LOG(display, |
| "MoveCursor pipe %s, (%d, %d)\n", |
| kmstest_pipe_name(pipe->pipe), |
| x, y); |
| |
| ret = drmModeMoveCursor(display->drm_fd, crtc_id, x, y); |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Commit position and fb changes to a primary plane via the legacy interface |
| * (setmode). |
| */ |
| static int igt_primary_plane_commit_legacy(igt_plane_t *primary, |
| igt_pipe_t *pipe, |
| bool fail_on_error) |
| { |
| struct igt_display *display = primary->pipe->display; |
| igt_output_t *output = igt_pipe_get_output(pipe); |
| drmModeModeInfo *mode; |
| uint32_t fb_id, crtc_id; |
| int ret; |
| |
| /* Primary planes can't be windowed when using a legacy commit */ |
| igt_assert((primary->values[IGT_PLANE_CRTC_X] == 0 && primary->values[IGT_PLANE_CRTC_Y] == 0)); |
| |
| /* nor rotated */ |
| if (!pipe->display->first_commit) |
| igt_assert(!igt_plane_is_prop_changed(primary, IGT_PLANE_ROTATION)); |
| |
| if (!igt_plane_is_prop_changed(primary, IGT_PLANE_FB_ID) && |
| !(primary->changed & IGT_PLANE_COORD_CHANGED_MASK) && |
| !igt_pipe_obj_is_prop_changed(primary->pipe, IGT_CRTC_MODE_ID)) |
| return 0; |
| |
| crtc_id = pipe->crtc_id; |
| fb_id = output ? igt_plane_get_fb_id(primary) : 0; |
| if (fb_id) |
| mode = igt_output_get_mode(output); |
| else |
| mode = NULL; |
| |
| if (fb_id) { |
| uint32_t src_x = primary->values[IGT_PLANE_SRC_X] >> 16; |
| uint32_t src_y = primary->values[IGT_PLANE_SRC_Y] >> 16; |
| |
| LOG(display, |
| "%s: SetCrtc pipe %s, fb %u, src (%d, %d), " |
| "mode %dx%d\n", |
| igt_output_name(output), |
| kmstest_pipe_name(pipe->pipe), |
| fb_id, |
| src_x, src_y, |
| mode->hdisplay, mode->vdisplay); |
| |
| ret = drmModeSetCrtc(display->drm_fd, |
| crtc_id, |
| fb_id, |
| src_x, src_y, |
| &output->id, |
| 1, |
| mode); |
| } else { |
| LOG(display, |
| "SetCrtc pipe %s, disabling\n", |
| kmstest_pipe_name(pipe->pipe)); |
| |
| ret = drmModeSetCrtc(display->drm_fd, |
| crtc_id, |
| fb_id, |
| 0, 0, /* x, y */ |
| NULL, /* connectors */ |
| 0, /* n_connectors */ |
| NULL /* mode */); |
| } |
| |
| CHECK_RETURN(ret, fail_on_error); |
| |
| return 0; |
| } |
| |
| static int igt_plane_fixup_rotation(igt_plane_t *plane, |
| igt_pipe_t *pipe) |
| { |
| int ret; |
| |
| if (!igt_plane_has_prop(plane, IGT_PLANE_ROTATION)) |
| return 0; |
| |
| LOG(pipe->display, "Fixing up initial rotation pipe %s, plane %d\n", |
| kmstest_pipe_name(pipe->pipe), plane->index); |
| |
| /* First try the easy case, can we change rotation without problems? */ |
| ret = igt_plane_set_property(plane, plane->props[IGT_PLANE_ROTATION], |
| plane->values[IGT_PLANE_ROTATION]); |
| if (!ret) |
| return 0; |
| |
| /* Disable the plane, while we tinker with rotation */ |
| ret = drmModeSetPlane(pipe->display->drm_fd, |
| plane->drm_plane->plane_id, |
| pipe->crtc_id, 0, /* fb_id */ |
| 0, /* flags */ |
| 0, 0, 0, 0, /* crtc_x, crtc_y, crtc_w, crtc_h */ |
| IGT_FIXED(0,0), IGT_FIXED(0,0), /* src_x, src_y */ |
| IGT_FIXED(0,0), IGT_FIXED(0,0)); /* src_w, src_h */ |
| |
| if (ret && plane->type != DRM_PLANE_TYPE_PRIMARY) |
| return ret; |
| |
| /* For primary plane, fall back to disabling the crtc. */ |
| if (ret) { |
| ret = drmModeSetCrtc(pipe->display->drm_fd, |
| pipe->crtc_id, 0, 0, 0, NULL, 0, NULL); |
| |
| if (ret) |
| return ret; |
| } |
| |
| /* and finally, set rotation property. */ |
| return igt_plane_set_property(plane, plane->props[IGT_PLANE_ROTATION], |
| plane->values[IGT_PLANE_ROTATION]); |
| } |
| |
| /* |
| * Commit position and fb changes to a plane. The value of @s will determine |
| * which API is used to do the programming. |
| */ |
| static int igt_plane_commit(igt_plane_t *plane, |
| igt_pipe_t *pipe, |
| enum igt_commit_style s, |
| bool fail_on_error) |
| { |
| if (pipe->display->first_commit || (s == COMMIT_UNIVERSAL && |
| igt_plane_is_prop_changed(plane, IGT_PLANE_ROTATION))) { |
| int ret; |
| |
| ret = igt_plane_fixup_rotation(plane, pipe); |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| if (plane->type == DRM_PLANE_TYPE_CURSOR && s == COMMIT_LEGACY) { |
| return igt_cursor_commit_legacy(plane, pipe, fail_on_error); |
| } else if (plane->type == DRM_PLANE_TYPE_PRIMARY && s == COMMIT_LEGACY) { |
| return igt_primary_plane_commit_legacy(plane, pipe, |
| fail_on_error); |
| } else { |
| return igt_drm_plane_commit(plane, pipe, fail_on_error); |
| } |
| } |
| |
| static bool is_atomic_prop(enum igt_atomic_crtc_properties prop) |
| { |
| if (prop == IGT_CRTC_MODE_ID || |
| prop == IGT_CRTC_ACTIVE || |
| prop == IGT_CRTC_OUT_FENCE_PTR) |
| return true; |
| |
| return false; |
| } |
| |
| /* |
| * Commit all plane changes to an output. Note that if @s is COMMIT_LEGACY, |
| * enabling/disabling the primary plane will also enable/disable the CRTC. |
| * |
| * If @fail_on_error is true, any failure to commit plane state will lead |
| * to subtest failure in the specific function where the failure occurs. |
| * Otherwise, the first error code encountered will be returned and no |
| * further programming will take place, which may result in some changes |
| * taking effect and others not taking effect. |
| */ |
| static int igt_pipe_commit(igt_pipe_t *pipe, |
| enum igt_commit_style s, |
| bool fail_on_error) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < IGT_NUM_CRTC_PROPS; i++) |
| if (igt_pipe_obj_is_prop_changed(pipe, i) && |
| !is_atomic_prop(i)) { |
| igt_assert(pipe->props[i]); |
| |
| ret = drmModeObjectSetProperty(pipe->display->drm_fd, |
| pipe->crtc_id, DRM_MODE_OBJECT_CRTC, |
| pipe->props[i], pipe->values[i]); |
| |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| for (i = 0; i < pipe->n_planes; i++) { |
| igt_plane_t *plane = &pipe->planes[i]; |
| |
| ret = igt_plane_commit(plane, pipe, s, fail_on_error); |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| return 0; |
| } |
| |
| static int igt_output_commit(igt_output_t *output, |
| enum igt_commit_style s, |
| bool fail_on_error) |
| { |
| int i, ret; |
| |
| for (i = 0; i < IGT_NUM_CONNECTOR_PROPS; i++) { |
| if (!igt_output_is_prop_changed(output, i)) |
| continue; |
| |
| /* CRTC_ID is set by calling drmModeSetCrtc in the legacy path. */ |
| if (i == IGT_CONNECTOR_CRTC_ID) |
| continue; |
| |
| igt_assert(output->props[i]); |
| |
| if (s == COMMIT_LEGACY) |
| ret = drmModeConnectorSetProperty(output->display->drm_fd, output->id, |
| output->props[i], output->values[i]); |
| else |
| ret = drmModeObjectSetProperty(output->display->drm_fd, output->id, |
| DRM_MODE_OBJECT_CONNECTOR, |
| output->props[i], output->values[i]); |
| |
| CHECK_RETURN(ret, fail_on_error); |
| } |
| |
| return 0; |
| } |
| |
| static uint64_t igt_mode_object_get_prop(igt_display_t *display, |
| uint32_t object_type, |
| uint32_t object_id, |
| uint32_t prop) |
| { |
| drmModeObjectPropertiesPtr proplist; |
| bool found = false; |
| int i; |
| uint64_t ret; |
| |
| proplist = drmModeObjectGetProperties(display->drm_fd, object_id, object_type); |
| for (i = 0; i < proplist->count_props; i++) { |
| if (proplist->props[i] != prop) |
| continue; |
| |
| found = true; |
| break; |
| } |
| |
| igt_assert(found); |
| |
| ret = proplist->prop_values[i]; |
| |
| drmModeFreeObjectProperties(proplist); |
| return ret; |
| } |
| |
| /** |
| * igt_plane_get_prop: |
| * @plane: Target plane. |
| * @prop: Property to check. |
| * |
| * Return current value on a plane for a given property. |
| * |
| * Returns: The value the property is set to, if this |
| * is a blob, the blob id is returned. This can be passed |
| * to drmModeGetPropertyBlob() to get the contents of the blob. |
| */ |
| uint64_t igt_plane_get_prop(igt_plane_t *plane, enum igt_atomic_plane_properties prop) |
| { |
| igt_assert(igt_plane_has_prop(plane, prop)); |
| |
| return igt_mode_object_get_prop(plane->pipe->display, DRM_MODE_OBJECT_PLANE, |
| plane->drm_plane->plane_id, plane->props[prop]); |
| } |
| |
| static bool igt_mode_object_get_prop_enum_value(int drm_fd, uint32_t id, const char *str, uint64_t *val) |
| { |
| drmModePropertyPtr prop = drmModeGetProperty(drm_fd, id); |
| int i; |
| |
| igt_assert(id); |
| igt_assert(prop); |
| |
| for (i = 0; i < prop->count_enums; i++) |
| if (!strcmp(str, prop->enums[i].name)) { |
| *val = prop->enums[i].value; |
| drmModeFreeProperty(prop); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool igt_plane_try_prop_enum(igt_plane_t *plane, |
| enum igt_atomic_plane_properties prop, |
| const char *val) |
| { |
| igt_display_t *display = plane->pipe->display; |
| uint64_t uval; |
| |
| igt_assert(plane->props[prop]); |
| |
| if (!igt_mode_object_get_prop_enum_value(display->drm_fd, |
| plane->props[prop], val, &uval)) |
| return false; |
| |
| igt_plane_set_prop_value(plane, prop, uval); |
| return true; |
| } |
| |
| void igt_plane_set_prop_enum(igt_plane_t *plane, |
| enum igt_atomic_plane_properties prop, |
| const char *val) |
| { |
| igt_assert(igt_plane_try_prop_enum(plane, prop, val)); |
| } |
| |
| /** |
| * igt_plane_replace_prop_blob: |
| * @plane: plane to set property on. |
| * @prop: property for which the blob will be replaced. |
| * @ptr: Pointer to contents for the property. |
| * @length: Length of contents. |
| * |
| * This function will destroy the old property blob for the given property, |
| * and will create a new property blob with the values passed to this function. |
| * |
| * The new property blob will be committed when you call igt_display_commit(), |
| * igt_display_commit2() or igt_display_commit_atomic(). |
| */ |
| void |
| igt_plane_replace_prop_blob(igt_plane_t *plane, enum igt_atomic_plane_properties prop, const void *ptr, size_t length) |
| { |
| igt_display_t *display = plane->pipe->display; |
| uint64_t *blob = &plane->values[prop]; |
| uint32_t blob_id = 0; |
| |
| if (*blob != 0) |
| igt_assert(drmModeDestroyPropertyBlob(display->drm_fd, |
| *blob) == 0); |
| |
| if (length > 0) |
| igt_assert(drmModeCreatePropertyBlob(display->drm_fd, |
| ptr, length, &blob_id) == 0); |
| |
| *blob = blob_id; |
| igt_plane_set_prop_changed(plane, prop); |
| } |
| |
| /** |
| * igt_output_get_prop: |
| * @output: Target output. |
| * @prop: Property to return. |
| * |
| * Return current value on an output for a given property. |
| * |
| * Returns: The value the property is set to, if this |
| * is a blob, the blob id is returned. This can be passed |
| * to drmModeGetPropertyBlob() to get the contents of the blob. |
| */ |
| uint64_t igt_output_get_prop(igt_output_t *output, enum igt_atomic_connector_properties prop) |
| { |
| igt_assert(igt_output_has_prop(output, prop)); |
| |
| return igt_mode_object_get_prop(output->display, DRM_MODE_OBJECT_CONNECTOR, |
| output->id, output->props[prop]); |
| } |
| |
| bool igt_output_try_prop_enum(igt_output_t *output, |
| enum igt_atomic_connector_properties prop, |
| const char *val) |
| { |
| igt_display_t *display = output->display; |
| uint64_t uval; |
| |
| igt_assert(output->props[prop]); |
| |
| if (!igt_mode_object_get_prop_enum_value(display->drm_fd, |
| output->props[prop], val, &uval)) |
| return false; |
| |
| igt_output_set_prop_value(output, prop, uval); |
| return true; |
| } |
| |
| void igt_output_set_prop_enum(igt_output_t *output, |
| enum igt_atomic_connector_properties prop, |
| const char *val) |
| { |
| igt_assert(igt_output_try_prop_enum(output, prop, val)); |
| } |
| |
| /** |
| * igt_output_replace_prop_blob: |
| * @output: output to set property on. |
| * @prop: property for which the blob will be replaced. |
| * @ptr: Pointer to contents for the property. |
| * @length: Length of contents. |
| * |
| * This function will destroy the old property blob for the given property, |
| * and will create a new property blob with the values passed to this function. |
| * |
| * The new property blob will be committed when you call igt_display_commit(), |
| * igt_display_commit2() or igt_display_commit_atomic(). |
| */ |
| void |
| igt_output_replace_prop_blob(igt_output_t *output, enum igt_atomic_connector_properties prop, const void *ptr, size_t length) |
| { |
| igt_display_t *display = output->display; |
| uint64_t *blob = &output->values[prop]; |
| uint32_t blob_id = 0; |
| |
| if (*blob != 0) |
| igt_assert(drmModeDestroyPropertyBlob(display->drm_fd, |
| *blob) == 0); |
| |
| if (length > 0) |
| igt_assert(drmModeCreatePropertyBlob(display->drm_fd, |
| ptr, length, &blob_id) == 0); |
| |
| *blob = blob_id; |
| igt_output_set_prop_changed(output, prop); |
| } |
| |
| /** |
| * igt_pipe_obj_get_prop: |
| * @pipe: Target pipe. |
| * @prop: Property to return. |
| * |
| * Return current value on a pipe for a given property. |
| * |
| * Returns: The value the property is set to, if this |
| * is a blob, the blob id is returned. This can be passed |
| * to drmModeGetPropertyBlob() to get the contents of the blob. |
| */ |
| uint64_t igt_pipe_obj_get_prop(igt_pipe_t *pipe, enum igt_atomic_crtc_properties prop) |
| { |
| igt_assert(igt_pipe_obj_has_prop(pipe, prop)); |
| |
| return igt_mode_object_get_prop(pipe->display, DRM_MODE_OBJECT_CRTC, |
| pipe->crtc_id, pipe->props[prop]); |
| } |
| |
| bool igt_pipe_obj_try_prop_enum(igt_pipe_t *pipe_obj, |
| enum igt_atomic_crtc_properties prop, |
| const char *val) |
| { |
| igt_display_t *display = pipe_obj->display; |
| uint64_t uval; |
| |
| igt_assert(pipe_obj->props[prop]); |
| |
| if (!igt_mode_object_get_prop_enum_value(display->drm_fd, |
| pipe_obj->props[prop], val, &uval)) |
| return false; |
| |
| igt_pipe_obj_set_prop_value(pipe_obj, prop, uval); |
| return true; |
| } |
| |
| void igt_pipe_obj_set_prop_enum(igt_pipe_t *pipe_obj, |
| enum igt_atomic_crtc_properties prop, |
| const char *val) |
| { |
| igt_assert(igt_pipe_obj_try_prop_enum(pipe_obj, prop, val)); |
| } |
| |
| /** |
| * igt_pipe_obj_replace_prop_blob: |
| * @pipe: pipe to set property on. |
| * @prop: property for which the blob will be replaced. |
| * @ptr: Pointer to contents for the property. |
| * @length: Length of contents. |
| * |
| * This function will destroy the old property blob for the given property, |
| * and will create a new property blob with the values passed to this function. |
| * |
| * The new property blob will be committed when you call igt_display_commit(), |
| * igt_display_commit2() or igt_display_commit_atomic(). |
| * |
| * Please use igt_output_override_mode() if you want to set #IGT_CRTC_MODE_ID, |
| * it works better with legacy commit. |
| */ |
| void |
| igt_pipe_obj_replace_prop_blob(igt_pipe_t *pipe, enum igt_atomic_crtc_properties prop, const void *ptr, size_t length) |
| { |
| igt_display_t *display = pipe->display; |
| uint64_t *blob = &pipe->values[prop]; |
| uint32_t blob_id = 0; |
| |
| if (*blob != 0) |
| igt_assert(drmModeDestroyPropertyBlob(display->drm_fd, |
| *blob) == 0); |
| |
| if (length > 0) |
| igt_assert(drmModeCreatePropertyBlob(display->drm_fd, |
| ptr, length, &blob_id) == 0); |
| |
| *blob = blob_id; |
| igt_pipe_obj_set_prop_changed(pipe, prop); |
| } |
| |
| /* |
| * Add crtc property changes to the atomic property set |
| */ |
| static void igt_atomic_prepare_crtc_commit(igt_pipe_t *pipe_obj, drmModeAtomicReq *req) |
| { |
| int i; |
| |
| for (i = 0; i < IGT_NUM_CRTC_PROPS; i++) { |
| if (!igt_pipe_obj_is_prop_changed(pipe_obj, i)) |
| continue; |
| |
| igt_debug("Pipe %s: Setting property \"%s\" to 0x%"PRIx64"/%"PRIi64"\n", |
| kmstest_pipe_name(pipe_obj->pipe), igt_crtc_prop_names[i], |
| pipe_obj->values[i], pipe_obj->values[i]); |
| |
| igt_assert_lt(0, drmModeAtomicAddProperty(req, pipe_obj->crtc_id, pipe_obj->props[i], pipe_obj->values[i])); |
| } |
| |
| if (pipe_obj->out_fence_fd != -1) { |
| close(pipe_obj->out_fence_fd); |
| pipe_obj->out_fence_fd = -1; |
| } |
| } |
| |
| /* |
| * Add connector property changes to the atomic property set |
| */ |
| static void igt_atomic_prepare_connector_commit(igt_output_t *output, drmModeAtomicReq *req) |
| { |
| |
| int i; |
| |
| for (i = 0; i < IGT_NUM_CONNECTOR_PROPS; i++) { |
| if (!igt_output_is_prop_changed(output, i)) |
| continue; |
| |
| /* it's an error to try an unsupported feature */ |
| igt_assert(output->props[i]); |
| |
| igt_debug("%s: Setting property \"%s\" to 0x%"PRIx64"/%"PRIi64"\n", |
| igt_output_name(output), igt_connector_prop_names[i], |
| output->values[i], output->values[i]); |
| |
| igt_assert_lt(0, drmModeAtomicAddProperty(req, |
| output->config.connector->connector_id, |
| output->props[i], |
| output->values[i])); |
| } |
| } |
| |
| /* |
| * Commit all the changes of all the planes,crtcs, connectors |
| * atomically using drmModeAtomicCommit() |
| */ |
| static int igt_atomic_commit(igt_display_t *display, uint32_t flags, void *user_data) |
| { |
| |
| int ret = 0, i; |
| enum pipe pipe; |
| drmModeAtomicReq *req; |
| igt_output_t *output; |
| |
| if (display->is_atomic != 1) |
| return -1; |
| req = drmModeAtomicAlloc(); |
| drmModeAtomicSetCursor(req, 0); |
| |
| for_each_pipe(display, pipe) { |
| igt_pipe_t *pipe_obj = &display->pipes[pipe]; |
| igt_plane_t *plane; |
| |
| /* |
| * Add CRTC Properties to the property set |
| */ |
| if (pipe_obj->changed) |
| igt_atomic_prepare_crtc_commit(pipe_obj, req); |
| |
| for_each_plane_on_pipe(display, pipe, plane) { |
| if (plane->changed) |
| igt_atomic_prepare_plane_commit(plane, pipe_obj, req); |
| } |
| |
| } |
| |
| for (i = 0; i < display->n_outputs; i++) { |
| output = &display->outputs[i]; |
| |
| if (!output->config.connector || !output->changed) |
| continue; |
| |
| LOG(display, "%s: preparing atomic, pipe: %s\n", |
| igt_output_name(output), |
| kmstest_pipe_name(output->config.pipe)); |
| |
| igt_atomic_prepare_connector_commit(output, req); |
| } |
| |
| ret = drmModeAtomicCommit(display->drm_fd, req, flags, user_data); |
| |
| drmModeAtomicFree(req); |
| return ret; |
| |
| } |
| |
| static void |
| display_commit_changed(igt_display_t *display, enum igt_commit_style s) |
| { |
| int i; |
| enum pipe pipe; |
| |
| for_each_pipe(display, pipe) { |
| igt_pipe_t *pipe_obj = &display->pipes[pipe]; |
| igt_plane_t *plane; |
| |
| if (s == COMMIT_ATOMIC) { |
| if (igt_pipe_obj_is_prop_changed(pipe_obj, IGT_CRTC_OUT_FENCE_PTR)) |
| igt_assert(pipe_obj->out_fence_fd >= 0); |
| |
| pipe_obj->values[IGT_CRTC_OUT_FENCE_PTR] = 0; |
| pipe_obj->changed = 0; |
| } else { |
| for (i = 0; i < IGT_NUM_CRTC_PROPS; i++) |
| if (!is_atomic_prop(i)) |
| igt_pipe_obj_clear_prop_changed(pipe_obj, i); |
| |
| if (s != COMMIT_UNIVERSAL) { |
| igt_pipe_obj_clear_prop_changed(pipe_obj, IGT_CRTC_MODE_ID); |
| igt_pipe_obj_clear_prop_changed(pipe_obj, IGT_CRTC_ACTIVE); |
| } |
| } |
| |
| for_each_plane_on_pipe(display, pipe, plane) { |
| if (s == COMMIT_ATOMIC) { |
| int fd; |
| plane->changed = 0; |
| |
| fd = plane->values[IGT_PLANE_IN_FENCE_FD]; |
| if (fd != -1) |
| close(fd); |
| |
| /* reset fence_fd to prevent it from being set for the next commit */ |
| plane->values[IGT_PLANE_IN_FENCE_FD] = -1; |
| } else { |
| plane->changed &= ~IGT_PLANE_COORD_CHANGED_MASK; |
| |
| igt_plane_clear_prop_changed(plane, IGT_PLANE_CRTC_ID); |
| igt_plane_clear_prop_changed(plane, IGT_PLANE_FB_ID); |
| |
| if (s != COMMIT_LEGACY || |
| !(plane->type == DRM_PLANE_TYPE_PRIMARY || |
| plane->type == DRM_PLANE_TYPE_CURSOR)) |
| plane->changed &= ~LEGACY_PLANE_COMMIT_MASK; |
| |
| if (display->first_commit) |
| igt_plane_clear_prop_changed(plane, IGT_PLANE_ROTATION); |
| } |
| } |
| } |
| |
| for (i = 0; i < display->n_outputs; i++) { |
| igt_output_t *output = &display->outputs[i]; |
| |
| if (s != COMMIT_UNIVERSAL) |
| output->changed = 0; |
| else |
| /* no modeset in universal commit, no change to crtc. */ |
| output->changed &= 1 << IGT_CONNECTOR_CRTC_ID; |
| } |
| |
| if (display->first_commit) { |
| igt_reset_fifo_underrun_reporting(display->drm_fd); |
| |
| igt_display_drop_events(display); |
| |
| display->first_commit = false; |
| } |
| } |
| |
| /* |
| * Commit all plane changes across all outputs of the display. |
| * |
| * If @fail_on_error is true, any failure to commit plane state will lead |
| * to subtest failure in the specific function where the failure occurs. |
| * Otherwise, the first error code encountered will be returned and no |
| * further programming will take place, which may result in some changes |
| * taking effect and others not taking effect. |
| */ |
| static int do_display_commit(igt_display_t *display, |
| enum igt_commit_style s, |
| bool fail_on_error) |
| { |
| int i, ret = 0; |
| enum pipe pipe; |
| LOG_INDENT(display, "commit"); |
| |
| /* someone managed to bypass igt_display_require, catch them */ |
| assert(display->n_pipes && display->n_outputs); |
| |
| igt_display_refresh(display); |
| |
| if (s == COMMIT_ATOMIC) { |
| ret = igt_atomic_commit(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL); |
| } else { |
| for_each_pipe(display, pipe) { |
| igt_pipe_t *pipe_obj = &display->pipes[pipe]; |
| |
| ret = igt_pipe_commit(pipe_obj, s, fail_on_error); |
| if (ret) |
| break; |
| } |
| |
| for (i = 0; !ret && i < display->n_outputs; i++) |
| ret = igt_output_commit(&display->outputs[i], s, fail_on_error); |
| } |
| |
| LOG_UNINDENT(display); |
| CHECK_RETURN(ret, fail_on_error); |
| |
| display_commit_changed(display, s); |
| |
| igt_debug_wait_for_keypress("modeset"); |
| |
| return 0; |
| } |
| |
| /** |
| * igt_display_try_commit_atomic: |
| * @display: #igt_display_t to commit. |
| * @flags: Flags passed to drmModeAtomicCommit. |
| * @user_data: User defined pointer passed to drmModeAtomicCommit. |
| * |
| * This function is similar to #igt_display_try_commit2, but is |
| * used when you want to pass different flags to the actual commit. |
| * |
| * Useful flags can be DRM_MODE_ATOMIC_ALLOW_MODESET, |
| * DRM_MODE_ATOMIC_NONBLOCK, DRM_MODE_PAGE_FLIP_EVENT, |
| * or DRM_MODE_ATOMIC_TEST_ONLY. |
| * |
| * @user_data is returned in the event if you pass |
| * DRM_MODE_PAGE_FLIP_EVENT to @flags. |
| * |
| * This function will return an error if commit fails, instead of |
| * aborting the test. |
| */ |
| int igt_display_try_commit_atomic(igt_display_t *display, uint32_t flags, void *user_data) |
| { |
| int ret; |
| |
| /* someone managed to bypass igt_display_require, catch them */ |
| assert(display->n_pipes && display->n_outputs); |
| |
| LOG_INDENT(display, "commit"); |
| |
| igt_display_refresh(display); |
| |
| ret = igt_atomic_commit(display, flags, user_data); |
| |
| LOG_UNINDENT(display); |
| |
| if (ret || (flags & DRM_MODE_ATOMIC_TEST_ONLY)) |
| return ret; |
| |
| if (display->first_commit) |
| igt_fail_on_f(flags & (DRM_MODE_PAGE_FLIP_EVENT | DRM_MODE_ATOMIC_NONBLOCK), |
| "First commit has to drop all stale events\n"); |
| |
| display_commit_changed(display, COMMIT_ATOMIC); |
| |
| igt_debug_wait_for_keypress("modeset"); |
| |
| return 0; |
| } |
| |
| /** |
| * igt_display_commit_atomic: |
| * @display: #igt_display_t to commit. |
| * @flags: Flags passed to drmModeAtomicCommit. |
| * @user_data: User defined pointer passed to drmModeAtomicCommit. |
| * |
| * This function is similar to #igt_display_commit2, but is |
| * used when you want to pass different flags to the actual commit. |
| * |
| * Useful flags can be DRM_MODE_ATOMIC_ALLOW_MODESET, |
| * DRM_MODE_ATOMIC_NONBLOCK, DRM_MODE_PAGE_FLIP_EVENT, |
| * or DRM_MODE_ATOMIC_TEST_ONLY. |
| * |
| * @user_data is returned in the event if you pass |
| * DRM_MODE_PAGE_FLIP_EVENT to @flags. |
| * |
| * This function will abort the test if commit fails. |
| */ |
| void igt_display_commit_atomic(igt_display_t *display, uint32_t flags, void *user_data) |
| { |
| int ret = igt_display_try_commit_atomic(display, flags, user_data); |
| |
| igt_assert_eq(ret, 0); |
| } |
| |
| /** |
| * igt_display_commit2: |
| * @display: DRM device handle |
| * @s: Commit style |
| * |
| * Commits framebuffer and positioning changes to all planes of each display |
| * pipe, using a specific API to perform the programming. This function should |
| * be used to exercise a specific driver programming API; igt_display_commit |
| * should be used instead if the API used is unimportant to the test being run. |
| * |
| * This function should only be used to commit changes that are expected to |
| * succeed, since any failure during the commit process will cause the IGT |
| * subtest to fail. To commit changes that are expected to fail, use |
| * @igt_try_display_commit2 instead. |
| * |
| * Returns: 0 upon success. This function will never return upon failure |
| * since igt_fail() at lower levels will longjmp out of it. |
| */ |
| int igt_display_commit2(igt_display_t *display, |
| enum igt_commit_style s) |
| { |
| do_display_commit(display, s, true); |
| |
| return 0; |
| } |
| |
| /** |
| * igt_display_try_commit2: |
| * @display: DRM device handle |
| * @s: Commit style |
| * |
| * Attempts to commit framebuffer and positioning changes to all planes of each |
| * display pipe. This function should be used to commit changes that are |
| * expected to fail, so that the error code can be checked for correctness. |
| * For changes that are expected to succeed, use @igt_display_commit instead. |
| * |
| * Note that in non-atomic commit styles, no display programming will be |
| * performed after the first failure is encountered, so only some of the |
| * operations requested by a test may have been completed. Tests that catch |
| * errors returned by this function should take care to restore the display to |
| * a sane state after a failure is detected. |
| * |
| * Returns: 0 upon success, otherwise the error code of the first error |
| * encountered. |
| */ |
| int igt_display_try_commit2(igt_display_t *display, enum igt_commit_style s) |
| { |
| return do_display_commit(display, s, false); |
| } |
| |
| /** |
| * igt_display_commit: |
| * @display: DRM device handle |
| * |
| * Commits framebuffer and positioning changes to all planes of each display |
| * pipe. |
| * |
| * Returns: 0 upon success. This function will never return upon failure |
| * since igt_fail() at lower levels will longjmp out of it. |
| */ |
| int igt_display_commit(igt_display_t *display) |
| { |
| return igt_display_commit2(display, COMMIT_LEGACY); |
| } |
| |
| /** |
| * igt_display_drop_events: |
| * @display: DRM device handle |
| * |
| * Nonblockingly reads all current events and drops them, for highest |
| * reliablility, call igt_display_commit2() first to flush all outstanding |
| * events. |
| * |
| * This will be called on the first commit after igt_display_reset() too, |
| * to make sure any stale events are flushed. |
| * |
| * Returns: Number of dropped events. |
| */ |
| int igt_display_drop_events(igt_display_t *display) |
| { |
| int ret = 0; |
| |
| /* Clear all events from drm fd. */ |
| struct pollfd pfd = { |
| .fd = display->drm_fd, |
| .events = POLLIN |
| }; |
| |
| while (poll(&pfd, 1, 0) > 0) { |
| struct drm_event *ev; |
| char buf[4096]; |
| ssize_t retval; |
| |
| retval = read(display->drm_fd, &buf, sizeof(buf)); |
| igt_assert_lt(0, retval); |
| |
| for (int i = 0; i < retval; i += ev->length) { |
| ev = (struct drm_event *)&buf[i]; |
| |
| igt_info("Dropping event type %u length %u\n", ev->type, ev->length); |
| igt_assert(ev->length + i <= sizeof(buf)); |
| ret++; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * igt_output_name: |
| * @output: Target output |
| * |
| * Returns: String representing a connector's name, e.g. "DP-1". |
| */ |
| const char *igt_output_name(igt_output_t *output) |
| { |
| return output->name; |
| } |
| |
| /** |
| * igt_output_get_mode: |
| * @output: Target output |
| * |
| * Get the current mode of the given connector |
| * |
| * Returns: A #drmModeModeInfo struct representing the current mode |
| */ |
| drmModeModeInfo *igt_output_get_mode(igt_output_t *output) |
| { |
| if (output->use_override_mode) |
| return &output->override_mode; |
| else |
| return &output->config.default_mode; |
| } |
| |
| /** |
| * igt_output_override_mode: |
| * @output: Output of which the mode will be overridden |
| * @mode: New mode, or NULL to disable override. |
| * |
| * Overrides the output's mode with @mode, so that it is used instead of the |
| * mode obtained with get connectors. Note that the mode is used without |
| * checking if the output supports it, so this might lead to unexpected results. |
| */ |
| void igt_output_override_mode(igt_output_t *output, drmModeModeInfo *mode) |
| { |
| igt_pipe_t *pipe = igt_output_get_driving_pipe(output); |
| |
| if (mode) |
| output->override_mode = *mode; |
| |
| output->use_override_mode = !!mode; |
| |
| if (pipe) { |
| if (output->display->is_atomic) |
| igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, igt_output_get_mode(output), sizeof(*mode)); |
| else |
| igt_pipe_obj_set_prop_changed(pipe, IGT_CRTC_MODE_ID); |
| } |
| } |
| |
| /* |
| * igt_output_set_pipe: |
| * @output: Target output for which the pipe is being set to |
| * @pipe: Display pipe to set to |
| * |
| * This function sets a @pipe to a specific @output connector by |
| * setting the CRTC_ID property of the @pipe. The pipe |
| * is only activated for all pipes except PIPE_NONE. |
| */ |
| void igt_output_set_pipe(igt_output_t *output, enum pipe pipe) |
| { |
| igt_display_t *display = output->display; |
| igt_pipe_t *old_pipe = NULL, *pipe_obj = NULL;; |
| |
| igt_assert(output->name); |
| |
| if (output->pending_pipe != PIPE_NONE) |
| old_pipe = igt_output_get_driving_pipe(output); |
| |
| if (pipe != PIPE_NONE) |
| pipe_obj = &display->pipes[pipe]; |
| |
| LOG(display, "%s: set_pipe(%s)\n", igt_output_name(output), |
| kmstest_pipe_name(pipe)); |
| output->pending_pipe = pipe; |
| |
| if (old_pipe) { |
| igt_output_t *old_output; |
| |
| old_output = igt_pipe_get_output(old_pipe); |
| if (!old_output) { |
| if (display->is_atomic) |
| igt_pipe_obj_replace_prop_blob(old_pipe, IGT_CRTC_MODE_ID, NULL, 0); |
| else |
| igt_pipe_obj_set_prop_changed(old_pipe, IGT_CRTC_MODE_ID); |
| |
| igt_pipe_obj_set_prop_value(old_pipe, IGT_CRTC_ACTIVE, 0); |
| } |
| } |
| |
| igt_output_set_prop_value(output, IGT_CONNECTOR_CRTC_ID, pipe == PIPE_NONE ? 0 : display->pipes[pipe].crtc_id); |
| |
| igt_output_refresh(output); |
| |
| if (pipe_obj) { |
| if (display->is_atomic) |
| igt_pipe_obj_replace_prop_blob(pipe_obj, IGT_CRTC_MODE_ID, igt_output_get_mode(output), sizeof(drmModeModeInfo)); |
| else |
| igt_pipe_obj_set_prop_changed(pipe_obj, IGT_CRTC_MODE_ID); |
| |
| igt_pipe_obj_set_prop_value(pipe_obj, IGT_CRTC_ACTIVE, 1); |
| } |
| } |
| |
| /* |
| * igt_pipe_refresh: |
| * @display: a pointer to an #igt_display_t structure |
| * @pipe: Pipe to refresh |
| * @force: Should be set to true if mode_blob is no longer considered |
| * to be valid, for example after doing an atomic commit during fork or closing display fd. |
| * |
| * Requests the pipe to be part of the state on next update. |
| * This is useful when state may have been out of sync after |
| * a fork, or we just want to be sure the pipe is included |
| * in the next commit. |
| */ |
| void igt_pipe_refresh(igt_display_t *display, enum pipe pipe, bool force) |
| { |
| igt_pipe_t *pipe_obj = &display->pipes[pipe]; |
| |
| if (force && display->is_atomic) { |
| igt_output_t *output = igt_pipe_get_output(pipe_obj); |
| |
| pipe_obj->values[IGT_CRTC_MODE_ID] = 0; |
| if (output) |
| igt_pipe_obj_replace_prop_blob(pipe_obj, IGT_CRTC_MODE_ID, igt_output_get_mode(output), sizeof(drmModeModeInfo)); |
| } else |
| igt_pipe_obj_set_prop_changed(pipe_obj, IGT_CRTC_MODE_ID); |
| } |
| |
| igt_plane_t *igt_output_get_plane(igt_output_t *output, int plane_idx) |
| { |
| igt_pipe_t *pipe; |
| |
| pipe = igt_output_get_driving_pipe(output); |
| igt_assert(pipe); |
| |
| return igt_pipe_get_plane(pipe, plane_idx); |
| } |
| |
| /** |
| * igt_output_get_plane_type: |
| * @output: Target output |
| * @plane_type: Cursor, primary or an overlay plane |
| * |
| * Finds a valid plane type for the given @output otherwise |
| * the test is skipped if the right combination of @output/@plane_type is not found |
| * |
| * Returns: A #igt_plane_t structure that matches the requested plane type |
| */ |
| igt_plane_t *igt_output_get_plane_type(igt_output_t *output, int plane_type) |
| { |
| igt_pipe_t *pipe; |
| |
| pipe = igt_output_get_driving_pipe(output); |
| igt_assert(pipe); |
| |
| return igt_pipe_get_plane_type(pipe, plane_type); |
| } |
| |
| /** |
| * igt_plane_set_fb: |
| * @plane: Plane |
| * @fb: Framebuffer pointer |
| * |
| * Pairs a given @framebuffer to a @plane |
| * |
| * This function also sets a default size and position for the framebuffer |
| * to avoid crashes on applications that ignore to set these. |
| */ |
| void igt_plane_set_fb(igt_plane_t *plane, struct igt_fb *fb) |
| { |
| igt_pipe_t *pipe = plane->pipe; |
| igt_display_t *display = pipe->display; |
| |
| LOG(display, "%s.%d: plane_set_fb(%d)\n", kmstest_pipe_name(pipe->pipe), |
| plane->index, fb ? fb->fb_id : 0); |
| |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, fb ? pipe->crtc_id : 0); |
| igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, fb ? fb->fb_id : 0); |
| |
| if (plane->type == DRM_PLANE_TYPE_CURSOR && fb) |
| plane->gem_handle = fb->gem_handle; |
| else |
| plane->gem_handle = 0; |
| |
| /* hack to keep tests working that don't call igt_plane_set_size() */ |
| if (fb) { |
| /* set default plane size as fb size */ |
| igt_plane_set_size(plane, fb->width, fb->height); |
| |
| /* set default src pos/size as fb size */ |
| igt_fb_set_position(fb, plane, 0, 0); |
| igt_fb_set_size(fb, plane, fb->width, fb->height); |
| |
| if (igt_plane_has_prop(plane, IGT_PLANE_COLOR_ENCODING)) |
| igt_plane_set_prop_enum(plane, IGT_PLANE_COLOR_ENCODING, |
| igt_color_encoding_to_str(fb->color_encoding)); |
| if (igt_plane_has_prop(plane, IGT_PLANE_COLOR_RANGE)) |
| igt_plane_set_prop_enum(plane, IGT_PLANE_COLOR_RANGE, |
| igt_color_range_to_str(fb->color_range)); |
| } else { |
| igt_plane_set_size(plane, 0, 0); |
| |
| /* set default src pos/size as fb size */ |
| igt_fb_set_position(fb, plane, 0, 0); |
| igt_fb_set_size(fb, plane, 0, 0); |
| } |
| } |
| |
| /** |
| * igt_plane_set_fence_fd: |
| * @plane: plane |
| * @fence_fd: fence fd, disable fence_fd by setting it to -1 |
| * |
| * This function sets a fence fd to enable a commit to wait for some event to |
| * occur before completing. |
| */ |
| void igt_plane_set_fence_fd(igt_plane_t *plane, int fence_fd) |
| { |
| int64_t fd; |
| |
| fd = plane->values[IGT_PLANE_IN_FENCE_FD]; |
| if (fd != -1) |
| close(fd); |
| |
| if (fence_fd != -1) { |
| fd = dup(fence_fd); |
| igt_fail_on(fd == -1); |
| } else |
| fd = -1; |
| |
| igt_plane_set_prop_value(plane, IGT_PLANE_IN_FENCE_FD, fd); |
| } |
| |
| /** |
| * igt_plane_set_position: |
| * @plane: Plane pointer for which position is to be set |
| * @x: X coordinate |
| * @y: Y coordinate |
| * |
| * This function sets a new (x,y) position for the given plane. |
| * New position will be committed at plane commit time via drmModeSetPlane(). |
| */ |
| void igt_plane_set_position(igt_plane_t *plane, int x, int y) |
| { |
| igt_pipe_t *pipe = plane->pipe; |
| igt_display_t *display = pipe->display; |
| |
| LOG(display, "%s.%d: plane_set_position(%d,%d)\n", |
| kmstest_pipe_name(pipe->pipe), plane->index, x, y); |
| |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_X, x); |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_Y, y); |
| } |
| |
| /** |
| * igt_plane_set_size: |
| * @plane: plane pointer for which size to be set |
| * @w: width |
| * @h: height |
| * |
| * This function sets width and height for requested plane. |
| * New size will be committed at plane commit time via |
| * drmModeSetPlane(). |
| */ |
| void igt_plane_set_size(igt_plane_t *plane, int w, int h) |
| { |
| igt_pipe_t *pipe = plane->pipe; |
| igt_display_t *display = pipe->display; |
| |
| LOG(display, "%s.%d: plane_set_size (%dx%d)\n", |
| kmstest_pipe_name(pipe->pipe), plane->index, w, h); |
| |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_W, w); |
| igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_H, h); |
| } |
| |
| /** |
| * igt_fb_set_position: |
| * @fb: framebuffer pointer |
| * @plane: plane |
| * @x: X position |
| * @y: Y position |
| * |
| * This function sets position for requested framebuffer as src to plane. |
| * New position will be committed at plane commit time via drmModeSetPlane(). |
| */ |
| void igt_fb_set_position(struct igt_fb *fb, igt_plane_t *plane, |
| uint32_t x, uint32_t y) |
| { |
| igt_pipe_t *pipe = plane->pipe; |
| igt_display_t *display = pipe->display; |
| |
| LOG(display, "%s.%d: fb_set_position(%d,%d)\n", |
| kmstest_pipe_name(pipe->pipe), plane->index, x, y); |
| |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_X, IGT_FIXED(x, 0)); |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_Y, IGT_FIXED(y, 0)); |
| } |
| |
| /** |
| * igt_fb_set_size: |
| * @fb: framebuffer pointer |
| * @plane: plane |
| * @w: width |
| * @h: height |
| * |
| * This function sets fetch rect size from requested framebuffer as src |
| * to plane. New size will be committed at plane commit time via |
| * drmModeSetPlane(). |
| */ |
| void igt_fb_set_size(struct igt_fb *fb, igt_plane_t *plane, |
| uint32_t w, uint32_t h) |
| { |
| igt_pipe_t *pipe = plane->pipe; |
| igt_display_t *display = pipe->display; |
| |
| LOG(display, "%s.%d: fb_set_size(%dx%d)\n", |
| kmstest_pipe_name(pipe->pipe), plane->index, w, h); |
| |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_W, IGT_FIXED(w, 0)); |
| igt_plane_set_prop_value(plane, IGT_PLANE_SRC_H, IGT_FIXED(h, 0)); |
| } |
| |
| static const char *rotation_name(igt_rotation_t rotation) |
| { |
| switch (rotation & IGT_ROTATION_MASK) { |
| case IGT_ROTATION_0: |
| return "0°"; |
| case IGT_ROTATION_90: |
| return "90°"; |
| case IGT_ROTATION_180: |
| return "180°"; |
| case IGT_ROTATION_270: |
| return "270°"; |
| default: |
| igt_assert(0); |
| } |
| } |
| |
| /** |
| * igt_plane_set_rotation: |
| * @plane: Plane pointer for which rotation is to be set |
| * @rotation: Plane rotation value (0, 90, 180, 270) |
| * |
| * This function sets a new rotation for the requested @plane. |
| * New @rotation will be committed at plane commit time via |
| * drmModeSetPlane(). |
| */ |
| void igt_plane_set_rotation(igt_plane_t *plane, igt_rotation_t rotation) |
| { |
| igt_pipe_t *pipe = plane->pipe; |
| igt_display_t *display = pipe->display; |
| |
| LOG(display, "%s.%d: plane_set_rotation(%s)\n", |
| kmstest_pipe_name(pipe->pipe), |
| plane->index, rotation_name(rotation)); |
| |
| igt_plane_set_prop_value(plane, IGT_PLANE_ROTATION, rotation); |
| } |
| |
| /** |
| * igt_pipe_request_out_fence: |
| * @pipe: pipe which out fence will be requested for |
| * |
| * Marks this pipe for requesting an out fence at the next atomic commit |
| * will contain the fd number of the out fence created by KMS. |
| */ |
| void igt_pipe_request_out_fence(igt_pipe_t *pipe) |
| { |
| igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)&pipe->out_fence_fd); |
| } |
| |
| /** |
| * igt_wait_for_vblank_count: |
| * @drm_fd: A drm file descriptor |
| * @pipe: Pipe to wait_for_vblank on |
| * @count: Number of vblanks to wait on |
| * |
| * Waits for a given number of vertical blank intervals |
| */ |
| void igt_wait_for_vblank_count(int drm_fd, enum pipe pipe, int count) |
| { |
| drmVBlank wait_vbl; |
| uint32_t pipe_id_flag; |
| |
| memset(&wait_vbl, 0, sizeof(wait_vbl)); |
| pipe_id_flag = kmstest_get_vbl_flag(pipe); |
| |
| wait_vbl.request.type = DRM_VBLANK_RELATIVE; |
| wait_vbl.request.type |= pipe_id_flag; |
| wait_vbl.request.sequence = count; |
| |
| igt_assert(drmWaitVBlank(drm_fd, &wait_vbl) == 0); |
| } |
| |
| /** |
| * igt_wait_for_vblank: |
| * @drm_fd: A drm file descriptor |
| * @pipe: Pipe to wait_for_vblank on |
| * |
| * Waits for 1 vertical blank intervals |
| */ |
| void igt_wait_for_vblank(int drm_fd, enum pipe pipe) |
| { |
| igt_wait_for_vblank_count(drm_fd, pipe, 1); |
| } |
| |
| /** |
| * igt_enable_connectors: |
| * |
| * Force connectors to be enabled where this is known to work well. Use |
| * #igt_reset_connectors to revert the changes. |
| * |
| * An exit handler is installed to ensure connectors are reset when the test |
| * exits. |
| */ |
| void igt_enable_connectors(int drm_fd) |
| { |
| drmModeRes *res; |
| |
| res = drmModeGetResources(drm_fd); |
| if (!res) |
| return; |
| |
| for (int i = 0; i < res->count_connectors; i++) { |
| drmModeConnector *c; |
| |
| /* Do a probe. This may be the first action after booting */ |
| c = drmModeGetConnector(drm_fd, res->connectors[i]); |
| if (!c) { |
| igt_warn("Could not read connector %u: %m\n", res->connectors[i]); |
| continue; |
| } |
| |
| /* don't attempt to force connectors that are already connected |
| */ |
| if (c->connection == DRM_MODE_CONNECTED) |
| continue; |
| |
| /* just enable VGA for now */ |
| if (c->connector_type == DRM_MODE_CONNECTOR_VGA) { |
| if (!kmstest_force_connector(drm_fd, c, FORCE_CONNECTOR_ON)) |
| igt_info("Unable to force state on %s-%d\n", |
| kmstest_connector_type_str(c->connector_type), |
| c->connector_type_id); |
| } |
| |
| drmModeFreeConnector(c); |
| } |
| } |
| |
| /** |
| * igt_reset_connectors: |
| * |
| * Remove any forced state from the connectors. |
| */ |
| void igt_reset_connectors(void) |
| { |
| /* reset the connectors stored in forced_connectors, avoiding any |
| * functions that are not safe to call in signal handlers */ |
| for (int i = 0; forced_connectors[i]; i++) |
| igt_sysfs_set(forced_connectors_device[i], |
| forced_connectors[i], |
| "detect"); |
| } |
| |
| /** |
| * igt_watch_hotplug: |
| * |
| * Begin monitoring udev for sysfs hotplug events. |
| * |
| * Returns: a udev monitor for detecting hotplugs on |
| */ |
| struct udev_monitor *igt_watch_hotplug(void) |
| { |
| struct udev *udev; |
| struct udev_monitor *mon; |
| int ret, flags, fd; |
| |
| udev = udev_new(); |
| igt_assert(udev != NULL); |
| |
| mon = udev_monitor_new_from_netlink(udev, "udev"); |
| igt_assert(mon != NULL); |
| |
| ret = udev_monitor_filter_add_match_subsystem_devtype(mon, |
| "drm", |
| "drm_minor"); |
| igt_assert_eq(ret, 0); |
| ret = udev_monitor_filter_update(mon); |
| igt_assert_eq(ret, 0); |
| ret = udev_monitor_enable_receiving(mon); |
| igt_assert_eq(ret, 0); |
| |
| /* Set the fd for udev as non blocking */ |
| fd = udev_monitor_get_fd(mon); |
| flags = fcntl(fd, F_GETFL, 0); |
| igt_assert(flags); |
| |
| flags |= O_NONBLOCK; |
| igt_assert_neq(fcntl(fd, F_SETFL, flags), -1); |
| |
| return mon; |
| } |
| |
| static bool event_detected(struct udev_monitor *mon, int timeout_secs, |
| const char *property) |
| { |
| struct udev_device *dev; |
| const char *hotplug_val; |
| struct pollfd fd = { |
| .fd = udev_monitor_get_fd(mon), |
| .events = POLLIN |
| }; |
| bool hotplug_received = false; |
| |
| /* Go through all of the events pending on the udev monitor. Once we |
| * receive a hotplug, we continue going through the rest of the events |
| * so that redundant hotplug events don't change the results of future |
| * checks |
| */ |
| while (!hotplug_received && poll(&fd, 1, timeout_secs * 1000)) { |
| dev = udev_monitor_receive_device(mon); |
| |
| hotplug_val = udev_device_get_property_value(dev, property); |
| if (hotplug_val && atoi(hotplug_val) == 1) |
| hotplug_received = true; |
| |
| udev_device_unref(dev); |
| } |
| |
| return hotplug_received; |
| } |
| |
| /** |
| * igt_hotplug_detected: |
| * @mon: A udev monitor initialized with #igt_watch_hotplug |
| * @timeout_secs: How long to wait for a hotplug event to occur. |
| * |
| * Assert that a hotplug event was received since we last checked the monitor. |
| * |
| * Returns: true if a sysfs hotplug event was received, false if we timed out |
| */ |
| bool igt_hotplug_detected(struct udev_monitor *mon, int timeout_secs) |
| { |
| return event_detected(mon, timeout_secs, "HOTPLUG"); |
| } |
| |
| /** |
| * igt_lease_change_detected: |
| * @mon: A udev monitor initialized with #igt_watch_hotplug |
| * @timeout_secs: How long to wait for a lease change event to occur. |
| * |
| * Assert that a lease change event was received since we last checked the monitor. |
| * |
| * Returns: true if a sysfs lease change event was received, false if we timed out |
| */ |
| bool igt_lease_change_detected(struct udev_monitor *mon, int timeout_secs) |
| { |
| return event_detected(mon, timeout_secs, "LEASE"); |
| } |
| |
| /** |
| * igt_flush_hotplugs: |
| * @mon: A udev monitor initialized with #igt_watch_hotplug |
| * |
| * Get rid of any pending hotplug events |
| */ |
| void igt_flush_hotplugs(struct udev_monitor *mon) |
| { |
| struct udev_device *dev; |
| |
| while ((dev = udev_monitor_receive_device(mon))) |
| udev_device_unref(dev); |
| } |
| |
| /** |
| * igt_cleanup_hotplug: |
| * @mon: A udev monitor initialized with #igt_watch_hotplug |
| * |
| * Cleanup the resources allocated by #igt_watch_hotplug |
| */ |
| void igt_cleanup_hotplug(struct udev_monitor *mon) |
| { |
| struct udev *udev = udev_monitor_get_udev(mon); |
| |
| udev_monitor_unref(mon); |
| mon = NULL; |
| udev_unref(udev); |
| } |
| |
| /** |
| * kmstest_get_vbl_flag: |
| * @pipe_id: Pipe to convert to flag representation. |
| * |
| * Convert a pipe id into the flag representation |
| * expected in DRM while processing DRM_IOCTL_WAIT_VBLANK. |
| */ |
| uint32_t kmstest_get_vbl_flag(uint32_t pipe_id) |
| { |
| if (pipe_id == 0) |
| return 0; |
| else if (pipe_id == 1) |
| return _DRM_VBLANK_SECONDARY; |
| else { |
| uint32_t pipe_flag = pipe_id << 1; |
| igt_assert(!(pipe_flag & ~DRM_VBLANK_HIGH_CRTC_MASK)); |
| return pipe_flag; |
| } |
| } |
| |
| static inline const uint32_t * |
| formats_ptr(const struct drm_format_modifier_blob *blob) |
| { |
| return (const uint32_t *)((const char *)blob + blob->formats_offset); |
| } |
| |
| static inline const struct drm_format_modifier * |
| modifiers_ptr(const struct drm_format_modifier_blob *blob) |
| { |
| return (const struct drm_format_modifier *)((const char *)blob + blob->modifiers_offset); |
| } |
| |
| static int igt_count_plane_format_mod(const struct drm_format_modifier_blob *blob_data) |
| { |
| const struct drm_format_modifier *modifiers; |
| int count = 0; |
| |
| modifiers = modifiers_ptr(blob_data); |
| |
| for (int i = 0; i < blob_data->count_modifiers; i++) |
| count += igt_hweight(modifiers[i].formats); |
| |
| return count; |
| } |
| |
| static void igt_fill_plane_format_mod(igt_display_t *display, igt_plane_t *plane) |
| { |
| const struct drm_format_modifier_blob *blob_data; |
| drmModePropertyBlobPtr blob; |
| uint64_t blob_id; |
| int idx = 0; |
| int count; |
| |
| if (!igt_plane_has_prop(plane, IGT_PLANE_IN_FORMATS)) { |
| drmModePlanePtr p = plane->drm_plane; |
| |
| count = p->count_formats; |
| |
| plane->format_mod_count = count; |
| plane->formats = calloc(count, sizeof(plane->formats[0])); |
| igt_assert(plane->formats); |
| plane->modifiers = calloc(count, sizeof(plane->modifiers[0])); |
| igt_assert(plane->modifiers); |
| |
| /* |
| * We don't know which modifiers are |
| * supported, so we'll assume linear only. |
| */ |
| for (int i = 0; i < count; i++) { |
| plane->formats[i] = p->formats[i]; |
| plane->modifiers[i] = DRM_FORMAT_MOD_LINEAR; |
| } |
| |
| return; |
| } |
| |
| blob_id = igt_plane_get_prop(plane, IGT_PLANE_IN_FORMATS); |
| |
| blob = drmModeGetPropertyBlob(display->drm_fd, blob_id); |
| if (!blob) |
| return; |
| |
| blob_data = (const struct drm_format_modifier_blob *) blob->data; |
| |
| count = igt_count_plane_format_mod(blob_data); |
| if (!count) |
| return; |
| |
| plane->format_mod_count = count; |
| plane->formats = calloc(count, sizeof(plane->formats[0])); |
| igt_assert(plane->formats); |
| plane->modifiers = calloc(count, sizeof(plane->modifiers[0])); |
| igt_assert(plane->modifiers); |
| |
| for (int i = 0; i < blob_data->count_modifiers; i++) { |
| for (int j = 0; j < 64; j++) { |
| const struct drm_format_modifier *modifiers = |
| modifiers_ptr(blob_data); |
| const uint32_t *formats = formats_ptr(blob_data); |
| |
| if (!(modifiers[i].formats & (1ULL << j))) |
| continue; |
| |
| plane->formats[idx] = formats[modifiers[i].offset + j]; |
| plane->modifiers[idx] = modifiers[i].modifier; |
| idx++; |
| igt_assert_lte(idx, plane->format_mod_count); |
| } |
| } |
| |
| igt_assert_eq(idx, plane->format_mod_count); |
| } |
| |
| bool igt_plane_has_format_mod(igt_plane_t *plane, uint32_t format, |
| uint64_t modifier) |
| { |
| int i; |
| |
| for (i = 0; i < plane->format_mod_count; i++) { |
| if (plane->formats[i] == format && |
| plane->modifiers[i] == modifier) |
| return true; |
| |
| } |
| |
| return false; |
| } |
| |
| static int igt_count_display_format_mod(igt_display_t *display) |
| { |
| enum pipe pipe; |
| int count = 0; |
| |
| for_each_pipe(display, pipe) { |
| igt_plane_t *plane; |
| |
| for_each_plane_on_pipe(display, pipe, plane) { |
| count += plane->format_mod_count; |
| } |
| } |
| |
| return count; |
| } |
| |
| static void |
| igt_add_display_format_mod(igt_display_t *display, uint32_t format, |
| uint64_t modifier) |
| { |
| int i; |
| |
| for (i = 0; i < display->format_mod_count; i++) { |
| if (display->formats[i] == format && |
| display->modifiers[i] == modifier) |
| return; |
| |
| } |
| |
| display->formats[i] = format; |
| display->modifiers[i] = modifier; |
| display->format_mod_count++; |
| } |
| |
| static void igt_fill_display_format_mod(igt_display_t *display) |
| { |
| int count = igt_count_display_format_mod(display); |
| enum pipe pipe; |
| |
| if (!count) |
| return; |
| |
| display->formats = calloc(count, sizeof(display->formats[0])); |
| igt_assert(display->formats); |
| display->modifiers = calloc(count, sizeof(display->modifiers[0])); |
| igt_assert(display->modifiers); |
| |
| for_each_pipe(display, pipe) { |
| igt_plane_t *plane; |
| |
| for_each_plane_on_pipe(display, pipe, plane) { |
| for (int i = 0; i < plane->format_mod_count; i++) { |
| igt_add_display_format_mod(display, |
| plane->formats[i], |
| plane->modifiers[i]); |
| igt_assert_lte(display->format_mod_count, count); |
| } |
| } |
| } |
| } |
| |
| bool igt_display_has_format_mod(igt_display_t *display, uint32_t format, |
| uint64_t modifier) |
| { |
| int i; |
| |
| for (i = 0; i < display->format_mod_count; i++) { |
| if (display->formats[i] == format && |
| display->modifiers[i] == modifier) |
| return true; |
| |
| } |
| |
| return false; |
| } |