| /* |
| * Copyright © 2013, 2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Paulo Zanoni <paulo.r.zanoni@intel.com> |
| * |
| */ |
| |
| #include "igt.h" |
| #include "igt_kmod.h" |
| #include "igt_sysfs.h" |
| #include <stdio.h> |
| #include <stdint.h> |
| #include <stdbool.h> |
| #include <string.h> |
| |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <dirent.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-dev.h> |
| |
| #include <drm.h> |
| |
| |
| #define MSR_PC8_RES 0x630 |
| #define MSR_PC9_RES 0x631 |
| #define MSR_PC10_RES 0x632 |
| |
| #define MAX_CONNECTORS 32 |
| #define MAX_ENCODERS 32 |
| #define MAX_CRTCS 16 |
| |
| enum pc8_status { |
| PC8_ENABLED, |
| PC8_DISABLED |
| }; |
| |
| enum screen_type { |
| SCREEN_TYPE_LPSP, |
| SCREEN_TYPE_NON_LPSP, |
| SCREEN_TYPE_ANY, |
| }; |
| |
| enum plane_type { |
| PLANE_OVERLAY, |
| PLANE_PRIMARY, |
| PLANE_CURSOR, |
| }; |
| |
| /* Wait flags */ |
| #define DONT_WAIT 0 |
| #define WAIT_STATUS 1 |
| #define WAIT_PC8_RES 2 |
| #define WAIT_EXTRA 4 |
| #define USE_DPMS 8 |
| |
| int drm_fd, msr_fd, pc8_status_fd; |
| int debugfs; |
| bool has_runtime_pm, has_pc8; |
| struct mode_set_data ms_data; |
| |
| /* Stuff used when creating FBs and mode setting. */ |
| struct mode_set_data { |
| drmModeResPtr res; |
| drmModeConnectorPtr connectors[MAX_CONNECTORS]; |
| drmModePropertyBlobPtr edids[MAX_CONNECTORS]; |
| |
| uint32_t devid; |
| }; |
| |
| /* Stuff we query at different times so we can compare. */ |
| struct compare_data { |
| drmModeResPtr res; |
| drmModeEncoderPtr encoders[MAX_ENCODERS]; |
| drmModeConnectorPtr connectors[MAX_CONNECTORS]; |
| drmModeCrtcPtr crtcs[MAX_CRTCS]; |
| drmModePropertyBlobPtr edids[MAX_CONNECTORS]; |
| }; |
| |
| struct modeset_params { |
| uint32_t crtc_id; |
| uint32_t connector_id; |
| struct igt_fb fb; |
| drmModeModeInfoPtr mode; |
| }; |
| |
| struct modeset_params lpsp_mode_params; |
| struct modeset_params non_lpsp_mode_params; |
| struct modeset_params *default_mode_params; |
| |
| static int8_t *pm_data = NULL; |
| |
| static int modprobe(const char *driver) |
| { |
| return igt_kmod_load(driver, ""); |
| } |
| |
| /* If the read fails, then the machine doesn't support PC8+ residencies. */ |
| static bool supports_pc8_plus_residencies(void) |
| { |
| int rc; |
| uint64_t val; |
| |
| rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC8_RES); |
| if (rc != sizeof(val)) |
| return false; |
| rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC9_RES); |
| if (rc != sizeof(val)) |
| return false; |
| rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC10_RES); |
| if (rc != sizeof(val)) |
| return false; |
| |
| return true; |
| } |
| |
| static uint64_t get_residency(uint32_t type) |
| { |
| int rc; |
| uint64_t ret; |
| |
| rc = pread(msr_fd, &ret, sizeof(uint64_t), type); |
| igt_assert(rc == sizeof(ret)); |
| |
| return ret; |
| } |
| |
| static bool pc8_plus_residency_changed(unsigned int timeout_sec) |
| { |
| uint64_t res_pc8, res_pc9, res_pc10; |
| |
| res_pc8 = get_residency(MSR_PC8_RES); |
| res_pc9 = get_residency(MSR_PC9_RES); |
| res_pc10 = get_residency(MSR_PC10_RES); |
| |
| return igt_wait(res_pc8 != get_residency(MSR_PC8_RES) || |
| res_pc9 != get_residency(MSR_PC9_RES) || |
| res_pc10 != get_residency(MSR_PC10_RES), |
| timeout_sec * 1000, 100); |
| } |
| |
| static enum pc8_status get_pc8_status(void) |
| { |
| ssize_t n_read; |
| char buf[150]; /* The whole file has less than 100 chars. */ |
| |
| lseek(pc8_status_fd, 0, SEEK_SET); |
| n_read = read(pc8_status_fd, buf, ARRAY_SIZE(buf)); |
| igt_assert(n_read >= 0); |
| buf[n_read] = '\0'; |
| |
| if (strstr(buf, "\nEnabled: yes\n")) |
| return PC8_ENABLED; |
| else |
| return PC8_DISABLED; |
| } |
| |
| static bool wait_for_pc8_status(enum pc8_status status) |
| { |
| return igt_wait(get_pc8_status() == status, 10000, 100); |
| } |
| |
| static bool wait_for_suspended(void) |
| { |
| if (has_pc8 && !has_runtime_pm) |
| return wait_for_pc8_status(PC8_ENABLED); |
| else |
| return igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPENDED); |
| } |
| |
| static bool wait_for_active(void) |
| { |
| if (has_pc8 && !has_runtime_pm) |
| return wait_for_pc8_status(PC8_DISABLED); |
| else |
| return igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_ACTIVE); |
| } |
| |
| static void disable_all_screens_dpms(struct mode_set_data *data) |
| { |
| int i; |
| |
| for (i = 0; i < data->res->count_connectors; i++) { |
| drmModeConnectorPtr c = data->connectors[i]; |
| |
| kmstest_set_connector_dpms(drm_fd, c, DRM_MODE_DPMS_OFF); |
| } |
| } |
| |
| static void disable_all_screens(struct mode_set_data *data) |
| { |
| kmstest_unset_all_crtcs(drm_fd, data->res); |
| } |
| |
| #define disable_all_screens_and_wait(data) do { \ |
| disable_all_screens(data); \ |
| igt_assert(wait_for_suspended()); \ |
| } while (0) |
| |
| static void disable_or_dpms_all_screens(struct mode_set_data *data, bool dpms) |
| { |
| if (dpms) |
| disable_all_screens_dpms(&ms_data); |
| else |
| disable_all_screens(&ms_data); |
| } |
| |
| #define disable_or_dpms_all_screens_and_wait(data, dpms) do { \ |
| disable_or_dpms_all_screens((data), (dpms)); \ |
| igt_assert(wait_for_suspended()); \ |
| } while (0) |
| |
| static bool init_modeset_params_for_type(struct mode_set_data *data, |
| struct modeset_params *params, |
| enum screen_type type) |
| { |
| int i; |
| drmModeConnectorPtr connector = NULL; |
| drmModeModeInfoPtr mode = NULL; |
| |
| for (i = 0; i < data->res->count_connectors; i++) { |
| drmModeConnectorPtr c = data->connectors[i]; |
| |
| if (type == SCREEN_TYPE_LPSP && |
| c->connector_type != DRM_MODE_CONNECTOR_eDP) |
| continue; |
| |
| if (type == SCREEN_TYPE_NON_LPSP && |
| c->connector_type == DRM_MODE_CONNECTOR_eDP) |
| continue; |
| |
| if (c->connection == DRM_MODE_CONNECTED && c->count_modes) { |
| connector = c; |
| mode = &c->modes[0]; |
| break; |
| } |
| } |
| |
| if (!connector) |
| return false; |
| |
| igt_create_pattern_fb(drm_fd, mode->hdisplay, mode->vdisplay, |
| DRM_FORMAT_XRGB8888, LOCAL_DRM_FORMAT_MOD_NONE, |
| ¶ms->fb); |
| |
| params->crtc_id = kmstest_find_crtc_for_connector(drm_fd, data->res, |
| connector, 0); |
| params->connector_id = connector->connector_id; |
| params->mode = mode; |
| |
| return true; |
| } |
| |
| static void init_modeset_cached_params(struct mode_set_data *data) |
| { |
| bool lpsp, non_lpsp; |
| |
| lpsp = init_modeset_params_for_type(data, &lpsp_mode_params, |
| SCREEN_TYPE_LPSP); |
| non_lpsp = init_modeset_params_for_type(data, &non_lpsp_mode_params, |
| SCREEN_TYPE_NON_LPSP); |
| |
| if (lpsp) |
| default_mode_params = &lpsp_mode_params; |
| else if (non_lpsp) |
| default_mode_params = &non_lpsp_mode_params; |
| else |
| default_mode_params = NULL; |
| } |
| |
| static bool set_mode_for_params(struct modeset_params *params) |
| { |
| int rc; |
| |
| rc = drmModeSetCrtc(drm_fd, params->crtc_id, params->fb.fb_id, 0, 0, |
| ¶ms->connector_id, 1, params->mode); |
| return (rc == 0); |
| } |
| |
| #define set_mode_for_params_and_wait(params) do { \ |
| igt_assert(set_mode_for_params(params)); \ |
| igt_assert(wait_for_active()); \ |
| } while (0) |
| |
| static bool enable_one_screen_with_type(struct mode_set_data *data, |
| enum screen_type type) |
| { |
| struct modeset_params *params = NULL; |
| |
| switch (type) { |
| case SCREEN_TYPE_ANY: |
| params = default_mode_params; |
| break; |
| case SCREEN_TYPE_LPSP: |
| params = &lpsp_mode_params; |
| break; |
| case SCREEN_TYPE_NON_LPSP: |
| params = &non_lpsp_mode_params; |
| break; |
| default: |
| igt_assert(0); |
| } |
| |
| if (!params) |
| return false; |
| |
| return set_mode_for_params(params); |
| } |
| |
| static void enable_one_screen(struct mode_set_data *data) |
| { |
| /* SKIP if there are no connected screens. */ |
| igt_require(enable_one_screen_with_type(data, SCREEN_TYPE_ANY)); |
| } |
| |
| #define enable_one_screen_and_wait(data) do { \ |
| enable_one_screen(data); \ |
| igt_assert(wait_for_active()); \ |
| } while (0) |
| |
| static drmModePropertyBlobPtr get_connector_edid(drmModeConnectorPtr connector, |
| int index) |
| { |
| bool found; |
| uint64_t prop_value; |
| drmModePropertyPtr prop; |
| drmModePropertyBlobPtr blob = NULL; |
| |
| found = kmstest_get_property(drm_fd, connector->connector_id, |
| DRM_MODE_OBJECT_CONNECTOR, "EDID", |
| NULL, &prop_value, &prop); |
| |
| if (found) { |
| igt_assert(prop->flags & DRM_MODE_PROP_BLOB); |
| igt_assert(prop->count_blobs == 0); |
| |
| blob = drmModeGetPropertyBlob(drm_fd, prop_value); |
| |
| drmModeFreeProperty(prop); |
| } |
| |
| return blob; |
| } |
| |
| static void init_mode_set_data(struct mode_set_data *data) |
| { |
| int i; |
| |
| data->res = drmModeGetResources(drm_fd); |
| igt_assert(data->res); |
| igt_assert(data->res->count_connectors <= MAX_CONNECTORS); |
| |
| for (i = 0; i < data->res->count_connectors; i++) { |
| data->connectors[i] = drmModeGetConnectorCurrent(drm_fd, |
| data->res->connectors[i]); |
| data->edids[i] = get_connector_edid(data->connectors[i], i); |
| } |
| |
| data->devid = intel_get_drm_devid(drm_fd); |
| |
| kmstest_set_vt_graphics_mode(); |
| |
| init_modeset_cached_params(&ms_data); |
| } |
| |
| static void fini_mode_set_data(struct mode_set_data *data) |
| { |
| int i; |
| |
| for (i = 0; i < data->res->count_connectors; i++) { |
| drmModeFreeConnector(data->connectors[i]); |
| drmModeFreePropertyBlob(data->edids[i]); |
| } |
| drmModeFreeResources(data->res); |
| } |
| |
| static void get_drm_info(struct compare_data *data) |
| { |
| int i; |
| |
| data->res = drmModeGetResources(drm_fd); |
| igt_assert(data->res); |
| |
| igt_assert(data->res->count_connectors <= MAX_CONNECTORS); |
| igt_assert(data->res->count_encoders <= MAX_ENCODERS); |
| igt_assert(data->res->count_crtcs <= MAX_CRTCS); |
| |
| for (i = 0; i < data->res->count_connectors; i++) { |
| /* Don't use GetConnectorCurrent, we want to force a reprobe |
| * here. */ |
| data->connectors[i] = drmModeGetConnector(drm_fd, |
| data->res->connectors[i]); |
| data->edids[i] = get_connector_edid(data->connectors[i], i); |
| } |
| for (i = 0; i < data->res->count_encoders; i++) |
| data->encoders[i] = drmModeGetEncoder(drm_fd, |
| data->res->encoders[i]); |
| for (i = 0; i < data->res->count_crtcs; i++) |
| data->crtcs[i] = drmModeGetCrtc(drm_fd, data->res->crtcs[i]); |
| } |
| |
| static void free_drm_info(struct compare_data *data) |
| { |
| int i; |
| |
| for (i = 0; i < data->res->count_connectors; i++) { |
| drmModeFreeConnector(data->connectors[i]); |
| drmModeFreePropertyBlob(data->edids[i]); |
| } |
| for (i = 0; i < data->res->count_encoders; i++) |
| drmModeFreeEncoder(data->encoders[i]); |
| for (i = 0; i < data->res->count_crtcs; i++) |
| drmModeFreeCrtc(data->crtcs[i]); |
| |
| drmModeFreeResources(data->res); |
| } |
| |
| #define COMPARE(d1, d2, data) igt_assert_eq(d1->data, d2->data) |
| #define COMPARE_ARRAY(d1, d2, size, data) do { \ |
| for (i = 0; i < size; i++) \ |
| igt_assert(d1->data[i] == d2->data[i]); \ |
| } while (0) |
| |
| static void assert_drm_resources_equal(struct compare_data *d1, |
| struct compare_data *d2) |
| { |
| COMPARE(d1, d2, res->count_connectors); |
| COMPARE(d1, d2, res->count_encoders); |
| COMPARE(d1, d2, res->count_crtcs); |
| COMPARE(d1, d2, res->min_width); |
| COMPARE(d1, d2, res->max_width); |
| COMPARE(d1, d2, res->min_height); |
| COMPARE(d1, d2, res->max_height); |
| } |
| |
| static void assert_modes_equal(drmModeModeInfoPtr m1, drmModeModeInfoPtr m2) |
| { |
| COMPARE(m1, m2, clock); |
| COMPARE(m1, m2, hdisplay); |
| COMPARE(m1, m2, hsync_start); |
| COMPARE(m1, m2, hsync_end); |
| COMPARE(m1, m2, htotal); |
| COMPARE(m1, m2, hskew); |
| COMPARE(m1, m2, vdisplay); |
| COMPARE(m1, m2, vsync_start); |
| COMPARE(m1, m2, vsync_end); |
| COMPARE(m1, m2, vtotal); |
| COMPARE(m1, m2, vscan); |
| COMPARE(m1, m2, vrefresh); |
| COMPARE(m1, m2, flags); |
| COMPARE(m1, m2, type); |
| igt_assert(strcmp(m1->name, m2->name) == 0); |
| } |
| |
| static void assert_drm_connectors_equal(drmModeConnectorPtr c1, |
| drmModeConnectorPtr c2) |
| { |
| int i; |
| |
| COMPARE(c1, c2, connector_id); |
| COMPARE(c1, c2, connector_type); |
| COMPARE(c1, c2, connector_type_id); |
| COMPARE(c1, c2, mmWidth); |
| COMPARE(c1, c2, mmHeight); |
| COMPARE(c1, c2, count_modes); |
| COMPARE(c1, c2, count_props); |
| COMPARE(c1, c2, count_encoders); |
| COMPARE_ARRAY(c1, c2, c1->count_props, props); |
| COMPARE_ARRAY(c1, c2, c1->count_encoders, encoders); |
| |
| for (i = 0; i < c1->count_modes; i++) |
| assert_modes_equal(&c1->modes[0], &c2->modes[0]); |
| } |
| |
| static void assert_drm_encoders_equal(drmModeEncoderPtr e1, |
| drmModeEncoderPtr e2) |
| { |
| COMPARE(e1, e2, encoder_id); |
| COMPARE(e1, e2, encoder_type); |
| COMPARE(e1, e2, possible_crtcs); |
| COMPARE(e1, e2, possible_clones); |
| } |
| |
| static void assert_drm_crtcs_equal(drmModeCrtcPtr c1, drmModeCrtcPtr c2) |
| { |
| COMPARE(c1, c2, crtc_id); |
| } |
| |
| static void assert_drm_edids_equal(drmModePropertyBlobPtr e1, |
| drmModePropertyBlobPtr e2) |
| { |
| if (!e1 && !e2) |
| return; |
| igt_assert(e1 && e2); |
| |
| COMPARE(e1, e2, length); |
| |
| igt_assert(memcmp(e1->data, e2->data, e1->length) == 0); |
| } |
| |
| static void assert_drm_infos_equal(struct compare_data *d1, |
| struct compare_data *d2) |
| { |
| int i; |
| |
| assert_drm_resources_equal(d1, d2); |
| |
| for (i = 0; i < d1->res->count_connectors; i++) { |
| assert_drm_connectors_equal(d1->connectors[i], |
| d2->connectors[i]); |
| assert_drm_edids_equal(d1->edids[i], d2->edids[i]); |
| } |
| |
| for (i = 0; i < d1->res->count_encoders; i++) |
| assert_drm_encoders_equal(d1->encoders[i], d2->encoders[i]); |
| |
| for (i = 0; i < d1->res->count_crtcs; i++) |
| assert_drm_crtcs_equal(d1->crtcs[i], d2->crtcs[i]); |
| } |
| |
| /* We could check the checksum too, but just the header is probably enough. */ |
| static bool edid_is_valid(const unsigned char *edid) |
| { |
| char edid_header[] = { |
| 0x0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x0, |
| }; |
| |
| return (memcmp(edid, edid_header, sizeof(edid_header)) == 0); |
| } |
| |
| static int count_drm_valid_edids(struct mode_set_data *data) |
| { |
| int i, ret = 0; |
| |
| for (i = 0; i < data->res->count_connectors; i++) |
| if (data->edids[i] && edid_is_valid(data->edids[i]->data)) |
| ret++; |
| return ret; |
| } |
| |
| static bool i2c_edid_is_valid(int fd) |
| { |
| int rc; |
| unsigned char edid[128] = {}; |
| struct i2c_msg msgs[] = { |
| { /* Start at 0. */ |
| .addr = 0x50, |
| .flags = 0, |
| .len = 1, |
| .buf = edid, |
| }, { /* Now read the EDID. */ |
| .addr = 0x50, |
| .flags = I2C_M_RD, |
| .len = 128, |
| .buf = edid, |
| } |
| }; |
| struct i2c_rdwr_ioctl_data msgset = { |
| .msgs = msgs, |
| .nmsgs = 2, |
| }; |
| |
| rc = ioctl(fd, I2C_RDWR, &msgset); |
| return (rc >= 0) ? edid_is_valid(edid) : false; |
| } |
| |
| static int count_i2c_valid_edids(void) |
| { |
| int fd, ret = 0; |
| DIR *dir; |
| |
| struct dirent *dirent; |
| char full_name[PATH_MAX]; |
| |
| dir = opendir("/dev/"); |
| igt_assert(dir); |
| |
| while ((dirent = readdir(dir))) { |
| if (strncmp(dirent->d_name, "i2c-", 4) == 0) { |
| sprintf(full_name, "/dev/%s", dirent->d_name); |
| fd = open(full_name, O_RDWR); |
| igt_assert_neq(fd, -1); |
| if (i2c_edid_is_valid(fd)) |
| ret++; |
| close(fd); |
| } |
| } |
| |
| closedir(dir); |
| |
| return ret; |
| } |
| |
| static int count_vga_outputs(struct mode_set_data *data) |
| { |
| int i, count = 0; |
| |
| for (i = 0; i < data->res->count_connectors; i++) |
| if (data->connectors[i]->connector_type == |
| DRM_MODE_CONNECTOR_VGA) |
| count++; |
| |
| return count; |
| } |
| |
| static void test_i2c(struct mode_set_data *data) |
| { |
| int i2c_edids = count_i2c_valid_edids(); |
| int drm_edids = count_drm_valid_edids(data); |
| int vga_outputs = count_vga_outputs(data); |
| int diff; |
| |
| igt_debug("i2c edids:%d drm edids:%d vga outputs:%d\n", |
| i2c_edids, drm_edids, vga_outputs); |
| |
| /* We fail to detect some VGA monitors using our i2c method. If you look |
| * at the dmesg of these cases, you'll see the Kernel complaining about |
| * the EDID reading mostly FFs and then disabling bit-banging. Since we |
| * don't want to reimplement everything the Kernel does, let's just |
| * accept the fact that some VGA outputs won't be properly detected. */ |
| diff = drm_edids - i2c_edids; |
| igt_assert(diff <= vga_outputs && diff >= 0); |
| } |
| |
| static void setup_pc8(void) |
| { |
| has_pc8 = false; |
| |
| /* Only Haswell supports the PC8 feature. */ |
| if (!IS_HASWELL(ms_data.devid) && !IS_BROADWELL(ms_data.devid)) |
| return; |
| |
| /* Make sure our Kernel supports MSR and the module is loaded. */ |
| igt_require(modprobe("msr") == 0); |
| |
| msr_fd = open("/dev/cpu/0/msr", O_RDONLY); |
| igt_assert_f(msr_fd >= 0, |
| "Can't open /dev/cpu/0/msr.\n"); |
| |
| /* Non-ULT machines don't support PC8+. */ |
| if (!supports_pc8_plus_residencies()) |
| return; |
| |
| pc8_status_fd = openat(debugfs, "i915_pc8_status", O_RDONLY); |
| if (pc8_status_fd == -1) |
| pc8_status_fd = openat(debugfs, |
| "i915_runtime_pm_status", O_RDONLY); |
| igt_assert_f(pc8_status_fd >= 0, |
| "Can't open /sys/kernel/debug/dri/0/i915_runtime_pm_status"); |
| |
| has_pc8 = true; |
| } |
| |
| static void setup_environment(void) |
| { |
| drm_fd = drm_open_driver_master(DRIVER_INTEL); |
| debugfs = igt_debugfs_dir(drm_fd); |
| igt_require(debugfs != -1); |
| |
| init_mode_set_data(&ms_data); |
| |
| pm_data = igt_pm_enable_sata_link_power_management(); |
| |
| has_runtime_pm = igt_setup_runtime_pm(); |
| setup_pc8(); |
| |
| igt_info("Runtime PM support: %d\n", has_runtime_pm); |
| igt_info("PC8 residency support: %d\n", has_pc8); |
| |
| igt_require(has_runtime_pm); |
| } |
| |
| static void restore_environment(void) |
| { |
| igt_pm_restore_sata_link_power_management(pm_data); |
| free(pm_data); |
| } |
| |
| static void teardown_environment(void) |
| { |
| restore_environment(); |
| fini_mode_set_data(&ms_data); |
| close(debugfs); |
| drmClose(drm_fd); |
| close(msr_fd); |
| if (has_pc8) |
| close(pc8_status_fd); |
| } |
| |
| static void basic_subtest(void) |
| { |
| disable_all_screens_and_wait(&ms_data); |
| |
| enable_one_screen_and_wait(&ms_data); |
| } |
| |
| static void pc8_residency_subtest(void) |
| { |
| igt_require(has_pc8); |
| |
| /* Make sure PC8+ residencies move! */ |
| disable_all_screens(&ms_data); |
| igt_assert_f(pc8_plus_residency_changed(120), |
| "Machine is not reaching PC8+ states, please check its " |
| "configuration.\n"); |
| |
| /* Make sure PC8+ residencies stop! */ |
| enable_one_screen(&ms_data); |
| igt_assert_f(!pc8_plus_residency_changed(10), |
| "PC8+ residency didn't stop with screen enabled.\n"); |
| } |
| |
| static void modeset_subtest(enum screen_type type, int rounds, int wait_flags) |
| { |
| int i; |
| |
| if (wait_flags & WAIT_PC8_RES) |
| igt_require(has_pc8); |
| |
| if (wait_flags & WAIT_EXTRA) |
| rounds /= 2; |
| |
| for (i = 0; i < rounds; i++) { |
| if (wait_flags & USE_DPMS) |
| disable_all_screens_dpms(&ms_data); |
| else |
| disable_all_screens(&ms_data); |
| |
| if (wait_flags & WAIT_STATUS) |
| igt_assert(wait_for_suspended()); |
| if (wait_flags & WAIT_PC8_RES) |
| igt_assert(pc8_plus_residency_changed(120)); |
| if (wait_flags & WAIT_EXTRA) |
| sleep(5); |
| |
| /* If we skip this line it's because the type of screen we want |
| * is not connected. */ |
| igt_require(enable_one_screen_with_type(&ms_data, type)); |
| if (wait_flags & WAIT_STATUS) |
| igt_assert(wait_for_active()); |
| if (wait_flags & WAIT_PC8_RES) |
| igt_assert(!pc8_plus_residency_changed(5)); |
| if (wait_flags & WAIT_EXTRA) |
| sleep(5); |
| } |
| } |
| |
| /* Test of the DRM resources reported by the IOCTLs are still the same. This |
| * ensures we still see the monitors with the same eyes. We get the EDIDs and |
| * compare them, which ensures we use DP AUX or GMBUS depending on what's |
| * connected. */ |
| static void drm_resources_equal_subtest(void) |
| { |
| struct compare_data pre_suspend, during_suspend, post_suspend; |
| |
| enable_one_screen_and_wait(&ms_data); |
| get_drm_info(&pre_suspend); |
| igt_assert(wait_for_active()); |
| |
| disable_all_screens_and_wait(&ms_data); |
| get_drm_info(&during_suspend); |
| igt_assert(wait_for_suspended()); |
| |
| enable_one_screen_and_wait(&ms_data); |
| get_drm_info(&post_suspend); |
| igt_assert(wait_for_active()); |
| |
| assert_drm_infos_equal(&pre_suspend, &during_suspend); |
| assert_drm_infos_equal(&pre_suspend, &post_suspend); |
| |
| free_drm_info(&pre_suspend); |
| free_drm_info(&during_suspend); |
| free_drm_info(&post_suspend); |
| } |
| |
| static void i2c_subtest_check_environment(void) |
| { |
| int i2c_dev_files = 0; |
| DIR *dev_dir; |
| struct dirent *dirent; |
| |
| /* Make sure the /dev/i2c-* files exist. */ |
| igt_require(modprobe("i2c-dev") == 0); |
| |
| dev_dir = opendir("/dev"); |
| igt_assert(dev_dir); |
| while ((dirent = readdir(dev_dir))) { |
| if (strncmp(dirent->d_name, "i2c-", 4) == 0) |
| i2c_dev_files++; |
| } |
| closedir(dev_dir); |
| igt_require(i2c_dev_files); |
| } |
| |
| /* Try to use raw I2C, which also needs interrupts. */ |
| static void i2c_subtest(void) |
| { |
| i2c_subtest_check_environment(); |
| |
| enable_one_screen_and_wait(&ms_data); |
| |
| disable_all_screens_and_wait(&ms_data); |
| test_i2c(&ms_data); |
| igt_assert(wait_for_suspended()); |
| |
| enable_one_screen(&ms_data); |
| } |
| |
| static void read_full_file(int fd, const char *name) |
| { |
| int rc; |
| char buf[128]; |
| |
| igt_assert_f(wait_for_suspended(), "File: %s\n", name); |
| |
| do { |
| rc = read(fd, buf, ARRAY_SIZE(buf)); |
| } while (rc == ARRAY_SIZE(buf)); |
| |
| igt_assert_f(wait_for_suspended(), "File: %s\n", name); |
| } |
| |
| static void read_files_from_dir(int path, int level) |
| { |
| DIR *dir; |
| struct dirent *dirent; |
| int rc; |
| |
| dir = fdopendir(path); |
| igt_assert(dir); |
| |
| igt_assert_lt(level, 128); |
| |
| while ((dirent = readdir(dir))) { |
| struct stat stat_buf; |
| int de; |
| |
| if (strcmp(dirent->d_name, ".") == 0) |
| continue; |
| if (strcmp(dirent->d_name, "..") == 0) |
| continue; |
| |
| de = openat(path, dirent->d_name, O_RDONLY); |
| |
| rc = fstat(de, &stat_buf); |
| igt_assert_eq(rc, 0); |
| |
| if (S_ISDIR(stat_buf.st_mode)) |
| read_files_from_dir(de, level + 1); |
| |
| if (S_ISREG(stat_buf.st_mode)) |
| read_full_file(de, dirent->d_name); |
| |
| close(de); |
| } |
| |
| closedir(dir); |
| } |
| |
| /* This test will probably pass, with a small chance of hanging the machine in |
| * case of bugs. Many of the bugs exercised by this patch just result in dmesg |
| * errors, so a "pass" here should be confirmed by a check on dmesg. */ |
| static void debugfs_read_subtest(void) |
| { |
| disable_all_screens_and_wait(&ms_data); |
| |
| read_files_from_dir(debugfs, 0); |
| } |
| |
| /* Read the comment on debugfs_read_subtest(). */ |
| static void sysfs_read_subtest(void) |
| { |
| int dir = igt_sysfs_open(drm_fd, NULL); |
| igt_require_f(dir != -1, "Can't open the sysfs directory\n"); |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| read_files_from_dir(dir, 0); |
| close(dir); |
| } |
| |
| /* Make sure we don't suspend when we have the i915_forcewake_user file open. */ |
| static void debugfs_forcewake_user_subtest(void) |
| { |
| int fd, rc; |
| |
| igt_require(intel_gen(ms_data.devid) >= 6); |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| fd = igt_open_forcewake_handle(drm_fd); |
| igt_require(fd >= 0); |
| |
| if (has_runtime_pm) { |
| igt_assert(wait_for_active()); |
| sleep(10); |
| igt_assert(wait_for_active()); |
| } else { |
| igt_assert(wait_for_suspended()); |
| } |
| |
| rc = close(fd); |
| igt_assert_eq(rc, 0); |
| |
| igt_assert(wait_for_suspended()); |
| } |
| |
| static void gem_mmap_subtest(bool gtt_mmap) |
| { |
| int i; |
| uint32_t handle; |
| int buf_size = 8192; |
| uint8_t *gem_buf; |
| |
| /* Create, map and set data while the device is active. */ |
| enable_one_screen_and_wait(&ms_data); |
| |
| handle = gem_create(drm_fd, buf_size); |
| |
| if (gtt_mmap) { |
| gem_buf = gem_mmap__gtt(drm_fd, handle, buf_size, |
| PROT_READ | PROT_WRITE); |
| } |
| else { |
| gem_buf = gem_mmap__cpu(drm_fd, handle, 0, buf_size, 0); |
| } |
| |
| |
| for (i = 0; i < buf_size; i++) |
| gem_buf[i] = i & 0xFF; |
| |
| for (i = 0; i < buf_size; i++) |
| igt_assert(gem_buf[i] == (i & 0xFF)); |
| |
| /* Now suspend, read and modify. */ |
| disable_all_screens_and_wait(&ms_data); |
| |
| for (i = 0; i < buf_size; i++) |
| igt_assert(gem_buf[i] == (i & 0xFF)); |
| igt_assert(wait_for_suspended()); |
| |
| for (i = 0; i < buf_size; i++) |
| gem_buf[i] = (~i & 0xFF); |
| igt_assert(wait_for_suspended()); |
| |
| /* Now resume and see if it's still there. */ |
| enable_one_screen_and_wait(&ms_data); |
| for (i = 0; i < buf_size; i++) |
| igt_assert(gem_buf[i] == (~i & 0xFF)); |
| |
| igt_assert(munmap(gem_buf, buf_size) == 0); |
| |
| /* Now the opposite: suspend, and try to create the mmap while |
| * suspended. */ |
| disable_all_screens_and_wait(&ms_data); |
| |
| if (gtt_mmap) { |
| gem_buf = gem_mmap__gtt(drm_fd, handle, buf_size, |
| PROT_READ | PROT_WRITE); |
| } |
| else { |
| gem_buf = gem_mmap__cpu(drm_fd, handle, 0, buf_size, 0); |
| } |
| |
| igt_assert(wait_for_suspended()); |
| |
| for (i = 0; i < buf_size; i++) |
| gem_buf[i] = i & 0xFF; |
| |
| for (i = 0; i < buf_size; i++) |
| igt_assert(gem_buf[i] == (i & 0xFF)); |
| |
| igt_assert(wait_for_suspended()); |
| |
| /* Resume and check if it's still there. */ |
| enable_one_screen_and_wait(&ms_data); |
| for (i = 0; i < buf_size; i++) |
| igt_assert(gem_buf[i] == (i & 0xFF)); |
| |
| igt_assert(munmap(gem_buf, buf_size) == 0); |
| gem_close(drm_fd, handle); |
| } |
| |
| static void gem_pread_subtest(void) |
| { |
| int i; |
| uint32_t handle; |
| int buf_size = 8192; |
| uint8_t *cpu_buf, *read_buf; |
| |
| cpu_buf = malloc(buf_size); |
| read_buf = malloc(buf_size); |
| igt_assert(cpu_buf); |
| igt_assert(read_buf); |
| memset(cpu_buf, 0, buf_size); |
| memset(read_buf, 0, buf_size); |
| |
| /* Create and set data while the device is active. */ |
| enable_one_screen_and_wait(&ms_data); |
| |
| handle = gem_create(drm_fd, buf_size); |
| |
| for (i = 0; i < buf_size; i++) |
| cpu_buf[i] = i & 0xFF; |
| |
| gem_write(drm_fd, handle, 0, cpu_buf, buf_size); |
| |
| gem_read(drm_fd, handle, 0, read_buf, buf_size); |
| |
| for (i = 0; i < buf_size; i++) |
| igt_assert(cpu_buf[i] == read_buf[i]); |
| |
| /* Now suspend, read and modify. */ |
| disable_all_screens_and_wait(&ms_data); |
| |
| memset(read_buf, 0, buf_size); |
| gem_read(drm_fd, handle, 0, read_buf, buf_size); |
| |
| for (i = 0; i < buf_size; i++) |
| igt_assert(cpu_buf[i] == read_buf[i]); |
| igt_assert(wait_for_suspended()); |
| |
| for (i = 0; i < buf_size; i++) |
| cpu_buf[i] = (~i & 0xFF); |
| gem_write(drm_fd, handle, 0, cpu_buf, buf_size); |
| igt_assert(wait_for_suspended()); |
| |
| /* Now resume and see if it's still there. */ |
| enable_one_screen_and_wait(&ms_data); |
| |
| memset(read_buf, 0, buf_size); |
| gem_read(drm_fd, handle, 0, read_buf, buf_size); |
| |
| for (i = 0; i < buf_size; i++) |
| igt_assert(cpu_buf[i] == read_buf[i]); |
| |
| gem_close(drm_fd, handle); |
| |
| free(cpu_buf); |
| free(read_buf); |
| } |
| |
| /* Paints a square of color $color, size $width x $height, at position $x x $y |
| * of $dst_handle, which contains pitch $pitch. */ |
| static void submit_blt_cmd(uint32_t dst_handle, uint16_t x, uint16_t y, |
| uint16_t width, uint16_t height, uint32_t pitch, |
| uint32_t color, uint32_t *presumed_dst_offset) |
| { |
| int i, reloc_pos; |
| uint32_t batch_handle; |
| int batch_size = 8 * sizeof(uint32_t); |
| uint32_t batch_buf[batch_size]; |
| struct drm_i915_gem_execbuffer2 execbuf = {}; |
| struct drm_i915_gem_exec_object2 objs[2] = {{}, {}}; |
| struct drm_i915_gem_relocation_entry relocs[1] = {{}}; |
| struct drm_i915_gem_wait gem_wait; |
| |
| i = 0; |
| |
| if (intel_gen(ms_data.devid) >= 8) |
| batch_buf[i++] = XY_COLOR_BLT_CMD_NOLEN | |
| XY_COLOR_BLT_WRITE_ALPHA | |
| XY_COLOR_BLT_WRITE_RGB | 0x5; |
| else |
| batch_buf[i++] = XY_COLOR_BLT_CMD_NOLEN | |
| XY_COLOR_BLT_WRITE_ALPHA | |
| XY_COLOR_BLT_WRITE_RGB | 0x4; |
| batch_buf[i++] = (3 << 24) | (0xF0 << 16) | (pitch); |
| batch_buf[i++] = (y << 16) | x; |
| batch_buf[i++] = ((y + height) << 16) | (x + width); |
| reloc_pos = i; |
| batch_buf[i++] = *presumed_dst_offset; |
| if (intel_gen(ms_data.devid) >= 8) |
| batch_buf[i++] = 0; |
| batch_buf[i++] = color; |
| |
| batch_buf[i++] = MI_BATCH_BUFFER_END; |
| if (intel_gen(ms_data.devid) < 8) |
| batch_buf[i++] = MI_NOOP; |
| |
| igt_assert(i * sizeof(uint32_t) == batch_size); |
| |
| batch_handle = gem_create(drm_fd, batch_size); |
| gem_write(drm_fd, batch_handle, 0, batch_buf, batch_size); |
| |
| relocs[0].target_handle = dst_handle; |
| relocs[0].delta = 0; |
| relocs[0].offset = reloc_pos * sizeof(uint32_t); |
| relocs[0].presumed_offset = *presumed_dst_offset; |
| relocs[0].read_domains = 0; |
| relocs[0].write_domain = I915_GEM_DOMAIN_RENDER; |
| |
| objs[0].handle = dst_handle; |
| objs[0].alignment = 64; |
| |
| objs[1].handle = batch_handle; |
| objs[1].relocation_count = 1; |
| objs[1].relocs_ptr = (uintptr_t)relocs; |
| |
| execbuf.buffers_ptr = (uintptr_t)objs; |
| execbuf.buffer_count = 2; |
| execbuf.batch_len = batch_size; |
| execbuf.flags = I915_EXEC_BLT; |
| i915_execbuffer2_set_context_id(execbuf, 0); |
| |
| do_ioctl(drm_fd, DRM_IOCTL_I915_GEM_EXECBUFFER2, &execbuf); |
| |
| *presumed_dst_offset = relocs[0].presumed_offset; |
| |
| gem_wait.flags = 0; |
| gem_wait.timeout_ns = 10000000000LL; /* 10s */ |
| |
| gem_wait.bo_handle = batch_handle; |
| do_ioctl(drm_fd, DRM_IOCTL_I915_GEM_WAIT, &gem_wait); |
| |
| gem_wait.bo_handle = dst_handle; |
| do_ioctl(drm_fd, DRM_IOCTL_I915_GEM_WAIT, &gem_wait); |
| |
| gem_close(drm_fd, batch_handle); |
| } |
| |
| /* Make sure we can submit a batch buffer and verify its result. */ |
| static void gem_execbuf_subtest(void) |
| { |
| int x, y; |
| uint32_t handle; |
| int bpp = 4; |
| int pitch = 128 * bpp; |
| int dst_size = 128 * 128 * bpp; /* 128x128 square */ |
| uint32_t *cpu_buf; |
| uint32_t presumed_offset = 0; |
| int sq_x = 5, sq_y = 10, sq_w = 15, sq_h = 20; |
| uint32_t color; |
| |
| /* Create and set data while the device is active. */ |
| enable_one_screen_and_wait(&ms_data); |
| |
| handle = gem_create(drm_fd, dst_size); |
| |
| cpu_buf = malloc(dst_size); |
| igt_assert(cpu_buf); |
| memset(cpu_buf, 0, dst_size); |
| gem_write(drm_fd, handle, 0, cpu_buf, dst_size); |
| |
| /* Now suspend and try it. */ |
| disable_all_screens_and_wait(&ms_data); |
| |
| color = 0x12345678; |
| submit_blt_cmd(handle, sq_x, sq_y, sq_w, sq_h, pitch, color, |
| &presumed_offset); |
| igt_assert(wait_for_suspended()); |
| |
| gem_read(drm_fd, handle, 0, cpu_buf, dst_size); |
| igt_assert(wait_for_suspended()); |
| for (y = 0; y < 128; y++) { |
| for (x = 0; x < 128; x++) { |
| uint32_t px = cpu_buf[y * 128 + x]; |
| |
| if (y >= sq_y && y < (sq_y + sq_h) && |
| x >= sq_x && x < (sq_x + sq_w)) |
| igt_assert_eq_u32(px, color); |
| else |
| igt_assert(px == 0); |
| } |
| } |
| |
| /* Now resume and check for it again. */ |
| enable_one_screen_and_wait(&ms_data); |
| |
| memset(cpu_buf, 0, dst_size); |
| gem_read(drm_fd, handle, 0, cpu_buf, dst_size); |
| for (y = 0; y < 128; y++) { |
| for (x = 0; x < 128; x++) { |
| uint32_t px = cpu_buf[y * 128 + x]; |
| |
| if (y >= sq_y && y < (sq_y + sq_h) && |
| x >= sq_x && x < (sq_x + sq_w)) |
| igt_assert_eq_u32(px, color); |
| else |
| igt_assert(px == 0); |
| } |
| } |
| |
| /* Now we'll do the opposite: do the blt while active, then read while |
| * suspended. We use the same spot, but a different color. As a bonus, |
| * we're testing the presumed_offset from the previous command. */ |
| color = 0x87654321; |
| submit_blt_cmd(handle, sq_x, sq_y, sq_w, sq_h, pitch, color, |
| &presumed_offset); |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| memset(cpu_buf, 0, dst_size); |
| gem_read(drm_fd, handle, 0, cpu_buf, dst_size); |
| for (y = 0; y < 128; y++) { |
| for (x = 0; x < 128; x++) { |
| uint32_t px = cpu_buf[y * 128 + x]; |
| |
| if (y >= sq_y && y < (sq_y + sq_h) && |
| x >= sq_x && x < (sq_x + sq_w)) |
| igt_assert_eq_u32(px, color); |
| else |
| igt_assert(px == 0); |
| } |
| } |
| |
| gem_close(drm_fd, handle); |
| |
| free(cpu_buf); |
| } |
| |
| /* Assuming execbuf already works, let's see what happens when we force many |
| * suspend/resume cycles with commands. */ |
| static void gem_execbuf_stress_subtest(int rounds, int wait_flags) |
| { |
| int i; |
| int batch_size = 4 * sizeof(uint32_t); |
| uint32_t batch_buf[batch_size]; |
| uint32_t handle; |
| struct drm_i915_gem_execbuffer2 execbuf = {}; |
| struct drm_i915_gem_exec_object2 objs[1] = {{}}; |
| |
| if (wait_flags & WAIT_PC8_RES) |
| igt_require(has_pc8); |
| |
| i = 0; |
| batch_buf[i++] = MI_NOOP; |
| batch_buf[i++] = MI_NOOP; |
| batch_buf[i++] = MI_BATCH_BUFFER_END; |
| batch_buf[i++] = MI_NOOP; |
| igt_assert(i * sizeof(uint32_t) == batch_size); |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| handle = gem_create(drm_fd, batch_size); |
| gem_write(drm_fd, handle, 0, batch_buf, batch_size); |
| |
| objs[0].handle = handle; |
| |
| execbuf.buffers_ptr = (uintptr_t)objs; |
| execbuf.buffer_count = 1; |
| execbuf.batch_len = batch_size; |
| execbuf.flags = I915_EXEC_RENDER; |
| i915_execbuffer2_set_context_id(execbuf, 0); |
| |
| for (i = 0; i < rounds; i++) { |
| do_ioctl(drm_fd, DRM_IOCTL_I915_GEM_EXECBUFFER2, &execbuf); |
| |
| if (wait_flags & WAIT_STATUS) |
| igt_assert(wait_for_suspended()); |
| if (wait_flags & WAIT_PC8_RES) |
| igt_assert(pc8_plus_residency_changed(120)); |
| if (wait_flags & WAIT_EXTRA) |
| sleep(5); |
| } |
| |
| gem_close(drm_fd, handle); |
| } |
| |
| /* When this test was written, it triggered WARNs and DRM_ERRORs on dmesg. */ |
| static void gem_idle_subtest(void) |
| { |
| disable_all_screens_and_wait(&ms_data); |
| |
| sleep(5); |
| |
| gem_quiescent_gpu(drm_fd); |
| } |
| |
| static void gem_evict_pwrite_subtest(void) |
| { |
| static drm_intel_bufmgr *bufmgr; |
| uint32_t buf; |
| int i; |
| |
| bufmgr = drm_intel_bufmgr_gem_init(drm_fd, 4096); |
| igt_assert(bufmgr); |
| igt_init_aperture_trashers(bufmgr); |
| |
| igt_trash_aperture(); |
| |
| disable_or_dpms_all_screens_and_wait(&ms_data, true); |
| igt_assert(wait_for_suspended()); |
| |
| buf = 0; |
| for (i = 0; i < num_trash_bos; i++) |
| gem_write(drm_fd, trash_bos[i]->handle, 0, &buf, sizeof(buf)); |
| |
| igt_cleanup_aperture_trashers(); |
| drm_intel_bufmgr_destroy(bufmgr); |
| } |
| |
| /* This also triggered WARNs on dmesg at some point. */ |
| static void reg_read_ioctl_subtest(void) |
| { |
| struct drm_i915_reg_read rr = { |
| .offset = 0x2358, /* render ring timestamp */ |
| }; |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| do_ioctl(drm_fd, DRM_IOCTL_I915_REG_READ, &rr); |
| |
| igt_assert(wait_for_suspended()); |
| } |
| |
| static bool device_in_pci_d3(void) |
| { |
| uint16_t val; |
| int rc; |
| |
| rc = pci_device_cfg_read_u16(intel_get_pci_device(), &val, 0xd4); |
| igt_assert_eq(rc, 0); |
| |
| igt_debug("%s: PCI D3 state=%d\n", __func__, val & 0x3); |
| return (val & 0x3) == 0x3; |
| } |
| |
| static void pci_d3_state_subtest(void) |
| { |
| igt_require(has_runtime_pm); |
| |
| disable_all_screens_and_wait(&ms_data); |
| igt_assert(igt_wait(device_in_pci_d3(), 2000, 100)); |
| |
| enable_one_screen_and_wait(&ms_data); |
| igt_assert(!device_in_pci_d3()); |
| } |
| |
| static void __attribute__((noreturn)) stay_subtest(void) |
| { |
| disable_all_screens_and_wait(&ms_data); |
| |
| while (1) |
| sleep(600); |
| } |
| |
| static void system_suspend_subtest(void) |
| { |
| disable_all_screens_and_wait(&ms_data); |
| igt_system_suspend_autoresume(SUSPEND_STATE_MEM, SUSPEND_TEST_NONE); |
| igt_assert(wait_for_suspended()); |
| } |
| |
| static void system_suspend_execbuf_subtest(void) |
| { |
| int i; |
| int batch_size = 4 * sizeof(uint32_t); |
| uint32_t batch_buf[batch_size]; |
| uint32_t handle; |
| struct drm_i915_gem_execbuffer2 execbuf = {}; |
| struct drm_i915_gem_exec_object2 objs[1] = {{}}; |
| |
| i = 0; |
| batch_buf[i++] = MI_NOOP; |
| batch_buf[i++] = MI_NOOP; |
| batch_buf[i++] = MI_BATCH_BUFFER_END; |
| batch_buf[i++] = MI_NOOP; |
| igt_assert(i * sizeof(uint32_t) == batch_size); |
| |
| handle = gem_create(drm_fd, batch_size); |
| gem_write(drm_fd, handle, 0, batch_buf, batch_size); |
| |
| objs[0].handle = handle; |
| |
| execbuf.buffers_ptr = (uintptr_t)objs; |
| execbuf.buffer_count = 1; |
| execbuf.batch_len = batch_size; |
| execbuf.flags = I915_EXEC_RENDER; |
| i915_execbuffer2_set_context_id(execbuf, 0); |
| |
| disable_all_screens_and_wait(&ms_data); |
| igt_system_suspend_autoresume(SUSPEND_STATE_MEM, SUSPEND_TEST_NONE); |
| igt_assert(wait_for_suspended()); |
| |
| for (i = 0; i < 20; i++) { |
| do_ioctl(drm_fd, DRM_IOCTL_I915_GEM_EXECBUFFER2, &execbuf); |
| igt_assert(wait_for_suspended()); |
| } |
| |
| gem_close(drm_fd, handle); |
| } |
| |
| static void system_suspend_modeset_subtest(void) |
| { |
| disable_all_screens_and_wait(&ms_data); |
| igt_system_suspend_autoresume(SUSPEND_STATE_MEM, SUSPEND_TEST_NONE); |
| igt_assert(wait_for_suspended()); |
| |
| enable_one_screen_and_wait(&ms_data); |
| disable_all_screens_and_wait(&ms_data); |
| } |
| |
| /* Enable a screen, activate DPMS, then do a modeset. At some point our driver |
| * produced WARNs on this case. */ |
| static void dpms_mode_unset_subtest(enum screen_type type) |
| { |
| disable_all_screens_and_wait(&ms_data); |
| |
| igt_require(enable_one_screen_with_type(&ms_data, type)); |
| igt_assert(wait_for_active()); |
| |
| disable_all_screens_dpms(&ms_data); |
| igt_assert(wait_for_suspended()); |
| |
| disable_all_screens_and_wait(&ms_data); |
| } |
| |
| static void fill_igt_fb(struct igt_fb *fb, uint32_t color) |
| { |
| int i; |
| uint32_t *ptr; |
| |
| ptr = gem_mmap__gtt(drm_fd, fb->gem_handle, fb->size, PROT_WRITE); |
| for (i = 0; i < fb->size/sizeof(uint32_t); i++) |
| ptr[i] = color; |
| igt_assert(munmap(ptr, fb->size) == 0); |
| } |
| |
| /* At some point, this test triggered WARNs in the Kernel. */ |
| static void cursor_subtest(bool dpms) |
| { |
| int rc; |
| struct igt_fb cursor_fb1, cursor_fb2, cursor_fb3; |
| uint32_t crtc_id; |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| igt_require(default_mode_params); |
| crtc_id = default_mode_params->crtc_id; |
| |
| igt_create_fb(drm_fd, 64, 64, DRM_FORMAT_ARGB8888, |
| LOCAL_DRM_FORMAT_MOD_NONE, &cursor_fb1); |
| igt_create_fb(drm_fd, 64, 64, DRM_FORMAT_ARGB8888, |
| LOCAL_DRM_FORMAT_MOD_NONE, &cursor_fb2); |
| igt_create_fb(drm_fd, 64, 64, DRM_FORMAT_ARGB8888, |
| LOCAL_I915_FORMAT_MOD_X_TILED, &cursor_fb3); |
| |
| fill_igt_fb(&cursor_fb1, 0xFF00FFFF); |
| fill_igt_fb(&cursor_fb2, 0xFF00FF00); |
| fill_igt_fb(&cursor_fb3, 0xFFFF0000); |
| |
| set_mode_for_params_and_wait(default_mode_params); |
| |
| rc = drmModeSetCursor(drm_fd, crtc_id, cursor_fb1.gem_handle, |
| cursor_fb1.width, cursor_fb1.height); |
| igt_assert_eq(rc, 0); |
| rc = drmModeMoveCursor(drm_fd, crtc_id, 0, 0); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_active()); |
| |
| disable_or_dpms_all_screens_and_wait(&ms_data, dpms); |
| |
| /* First, just move the cursor. */ |
| rc = drmModeMoveCursor(drm_fd, crtc_id, 1, 1); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Then unset it, and set a new one. */ |
| rc = drmModeSetCursor(drm_fd, crtc_id, 0, 0, 0); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| rc = drmModeSetCursor(drm_fd, crtc_id, cursor_fb2.gem_handle, |
| cursor_fb1.width, cursor_fb2.height); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Move the new cursor. */ |
| rc = drmModeMoveCursor(drm_fd, crtc_id, 2, 2); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Now set a new one without unsetting the previous one. */ |
| rc = drmModeSetCursor(drm_fd, crtc_id, cursor_fb1.gem_handle, |
| cursor_fb1.width, cursor_fb1.height); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Cursor 3 was created with tiling and painted with a GTT mmap, so |
| * hopefully it has some fences around it. */ |
| rc = drmModeRmFB(drm_fd, cursor_fb3.fb_id); |
| igt_assert_eq(rc, 0); |
| gem_set_tiling(drm_fd, cursor_fb3.gem_handle, false, cursor_fb3.stride); |
| igt_assert(wait_for_suspended()); |
| |
| rc = drmModeSetCursor(drm_fd, crtc_id, cursor_fb3.gem_handle, |
| cursor_fb3.width, cursor_fb3.height); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Make sure nothing remains for the other tests. */ |
| rc = drmModeSetCursor(drm_fd, crtc_id, 0, 0, 0); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| } |
| |
| static enum plane_type get_plane_type(uint32_t plane_id) |
| { |
| int i; |
| bool found; |
| uint64_t prop_value; |
| drmModePropertyPtr prop; |
| const char *enum_name = NULL; |
| enum plane_type type; |
| |
| found = kmstest_get_property(drm_fd, plane_id, DRM_MODE_OBJECT_PLANE, |
| "type", NULL, &prop_value, &prop); |
| igt_assert(found); |
| |
| igt_assert(prop->flags & DRM_MODE_PROP_ENUM); |
| igt_assert(prop_value < prop->count_enums); |
| |
| for (i = 0; i < prop->count_enums; i++) { |
| if (prop->enums[i].value == prop_value) { |
| enum_name = prop->enums[i].name; |
| break; |
| } |
| } |
| igt_assert(enum_name); |
| |
| if (strcmp(enum_name, "Overlay") == 0) |
| type = PLANE_OVERLAY; |
| else if (strcmp(enum_name, "Primary") == 0) |
| type = PLANE_PRIMARY; |
| else if (strcmp(enum_name, "Cursor") == 0) |
| type = PLANE_CURSOR; |
| else |
| igt_assert(0); |
| |
| drmModeFreeProperty(prop); |
| |
| return type; |
| } |
| |
| static void test_one_plane(bool dpms, uint32_t plane_id, |
| enum plane_type plane_type) |
| { |
| int rc; |
| uint32_t plane_format, plane_w, plane_h; |
| uint32_t crtc_id; |
| struct igt_fb plane_fb1, plane_fb2; |
| int32_t crtc_x = 0, crtc_y = 0; |
| uint64_t tiling; |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| crtc_id = default_mode_params->crtc_id; |
| |
| switch (plane_type) { |
| case PLANE_OVERLAY: |
| plane_format = DRM_FORMAT_XRGB8888; |
| plane_w = 64; |
| plane_h = 64; |
| tiling = LOCAL_I915_FORMAT_MOD_X_TILED; |
| break; |
| case PLANE_PRIMARY: |
| plane_format = DRM_FORMAT_XRGB8888; |
| plane_w = default_mode_params->mode->hdisplay; |
| plane_h = default_mode_params->mode->vdisplay; |
| tiling = LOCAL_I915_FORMAT_MOD_X_TILED; |
| break; |
| case PLANE_CURSOR: |
| plane_format = DRM_FORMAT_ARGB8888; |
| plane_w = 64; |
| plane_h = 64; |
| tiling = LOCAL_DRM_FORMAT_MOD_NONE; |
| break; |
| default: |
| igt_assert(0); |
| break; |
| } |
| |
| igt_create_fb(drm_fd, plane_w, plane_h, plane_format, tiling, |
| &plane_fb1); |
| igt_create_fb(drm_fd, plane_w, plane_h, plane_format, tiling, |
| &plane_fb2); |
| fill_igt_fb(&plane_fb1, 0xFF00FFFF); |
| fill_igt_fb(&plane_fb2, 0xFF00FF00); |
| |
| set_mode_for_params_and_wait(default_mode_params); |
| |
| rc = drmModeSetPlane(drm_fd, plane_id, crtc_id, plane_fb1.fb_id, 0, |
| 0, 0, plane_fb1.width, plane_fb1.height, |
| 0 << 16, 0 << 16, plane_fb1.width << 16, |
| plane_fb1.height << 16); |
| igt_assert_eq(rc, 0); |
| |
| disable_or_dpms_all_screens_and_wait(&ms_data, dpms); |
| |
| /* Just move the plane around. */ |
| if (plane_type != PLANE_PRIMARY) { |
| crtc_x++; |
| crtc_y++; |
| } |
| rc = drmModeSetPlane(drm_fd, plane_id, crtc_id, plane_fb1.fb_id, 0, |
| crtc_x, crtc_y, plane_fb1.width, plane_fb1.height, |
| 0 << 16, 0 << 16, plane_fb1.width << 16, |
| plane_fb1.height << 16); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Unset, then change the plane. */ |
| rc = drmModeSetPlane(drm_fd, plane_id, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| rc = drmModeSetPlane(drm_fd, plane_id, crtc_id, plane_fb2.fb_id, 0, |
| crtc_x, crtc_y, plane_fb2.width, plane_fb2.height, |
| 0 << 16, 0 << 16, plane_fb2.width << 16, |
| plane_fb2.height << 16); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Now change the plane without unsetting first. */ |
| rc = drmModeSetPlane(drm_fd, plane_id, crtc_id, plane_fb1.fb_id, 0, |
| crtc_x, crtc_y, plane_fb1.width, plane_fb1.height, |
| 0 << 16, 0 << 16, plane_fb1.width << 16, |
| plane_fb1.height << 16); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| |
| /* Make sure nothing remains for the other tests. */ |
| rc = drmModeSetPlane(drm_fd, plane_id, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); |
| igt_assert_eq(rc, 0); |
| igt_assert(wait_for_suspended()); |
| } |
| |
| /* This one also triggered WARNs on our driver at some point in time. */ |
| static void planes_subtest(bool universal, bool dpms) |
| { |
| int i, rc, planes_tested = 0, crtc_idx; |
| drmModePlaneResPtr planes; |
| |
| igt_require(default_mode_params); |
| crtc_idx = kmstest_get_crtc_idx(ms_data.res, |
| default_mode_params->crtc_id); |
| |
| if (universal) { |
| rc = drmSetClientCap(drm_fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, |
| 1); |
| igt_require(rc == 0); |
| } |
| |
| planes = drmModeGetPlaneResources(drm_fd); |
| for (i = 0; i < planes->count_planes; i++) { |
| drmModePlanePtr plane; |
| |
| plane = drmModeGetPlane(drm_fd, planes->planes[i]); |
| igt_assert(plane); |
| |
| if (plane->possible_crtcs & (1 << crtc_idx)) { |
| enum plane_type type; |
| |
| type = universal ? get_plane_type(plane->plane_id) : |
| PLANE_OVERLAY; |
| test_one_plane(dpms, plane->plane_id, type); |
| planes_tested++; |
| } |
| drmModeFreePlane(plane); |
| } |
| drmModeFreePlaneResources(planes); |
| |
| if (universal) { |
| rc = drmSetClientCap(drm_fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 0); |
| igt_assert_eq(rc, 0); |
| |
| igt_assert_lte(3, planes_tested); |
| } else { |
| igt_assert_lte(1, planes_tested); |
| } |
| } |
| |
| static void pm_test_tiling(void) |
| { |
| uint32_t *handles; |
| uint8_t **gem_bufs; |
| |
| int max_gem_objs = 0; |
| uint8_t off_bit = 14; |
| uint32_t gtt_obj_max_size = (256 * 1024); |
| |
| uint32_t i, j, k, tiling_modes[3] = { |
| I915_TILING_NONE, |
| I915_TILING_X, |
| I915_TILING_Y, |
| }; |
| uint32_t ti, sw; |
| |
| /* default stride value */ |
| uint32_t stride = 512; |
| |
| /* calculate how many objects we can map */ |
| for (i = 1 << off_bit; i <= gtt_obj_max_size; i <<= 1, max_gem_objs++) |
| ; |
| |
| gem_bufs = calloc(max_gem_objs, sizeof(*gem_bufs)); |
| handles = calloc(max_gem_objs, sizeof(*handles)); |
| |
| /* try to set different tiling for each handle */ |
| for (i = 0; i < ARRAY_SIZE(tiling_modes); i++) { |
| |
| for (j = 0, k = 1 << off_bit; |
| k <= gtt_obj_max_size; k <<= 1, j++) { |
| handles[j] = gem_create(drm_fd, k); |
| gem_bufs[j] = gem_mmap__gtt(drm_fd, handles[j], |
| k, PROT_WRITE); |
| memset(gem_bufs[j], 0x0, k); |
| } |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| for (j = 0; j < max_gem_objs; j++) { |
| gem_set_tiling(drm_fd, handles[j], |
| tiling_modes[i], stride); |
| gem_get_tiling(drm_fd, handles[j], &ti, &sw); |
| igt_assert(tiling_modes[i] == ti); |
| } |
| |
| enable_one_screen_and_wait(&ms_data); |
| |
| for (j = 0, k = 1 << off_bit; |
| k <= gtt_obj_max_size; k <<= 1, j++) { |
| igt_assert(munmap(gem_bufs[j], k) == 0); |
| gem_close(drm_fd, handles[j]); |
| } |
| } |
| |
| free(gem_bufs); |
| free(handles); |
| } |
| |
| static void pm_test_caching(void) |
| { |
| uint32_t handle; |
| uint8_t *gem_buf; |
| |
| uint32_t i; |
| uint32_t default_cache_level; |
| uint32_t gtt_obj_max_size = (16 * 1024); |
| uint32_t cache_levels[3] = { |
| I915_CACHING_NONE, |
| I915_CACHING_CACHED, /* LLC caching */ |
| I915_CACHING_DISPLAY, /* eDRAM caching */ |
| }; |
| |
| disable_all_screens(&ms_data); |
| |
| handle = gem_create(drm_fd, gtt_obj_max_size); |
| default_cache_level = gem_get_caching(drm_fd, handle); |
| gem_buf = gem_mmap__gtt(drm_fd, handle, gtt_obj_max_size, PROT_WRITE); |
| |
| for (i = 0; i < ARRAY_SIZE(cache_levels); i++) { |
| igt_assert(wait_for_suspended()); |
| gem_set_caching(drm_fd, handle, default_cache_level); |
| |
| /* Ensure we bind the vma into the GGTT */ |
| memset(gem_buf, 16 << i, gtt_obj_max_size); |
| |
| /* Now try changing the cache-level on the bound object. |
| * This will either unlikely unbind the object from the GGTT, |
| * or more likely just change the PTEs inside the GGTT. Either |
| * way the driver must take the rpm wakelock around the GSM |
| * access. |
| */ |
| igt_debug("Setting cache level %u\n", cache_levels[i]); |
| igt_assert(wait_for_suspended()); |
| gem_set_caching(drm_fd, handle, cache_levels[i]); |
| } |
| |
| igt_assert(munmap(gem_buf, gtt_obj_max_size) == 0); |
| gem_close(drm_fd, handle); |
| } |
| |
| static void fences_subtest(bool dpms) |
| { |
| int i; |
| uint32_t *buf_ptr; |
| uint32_t tiling = false, swizzle; |
| struct modeset_params params; |
| |
| disable_all_screens_and_wait(&ms_data); |
| |
| igt_require(default_mode_params); |
| params.crtc_id = default_mode_params->crtc_id; |
| params.connector_id = default_mode_params->connector_id; |
| params.mode = default_mode_params->mode; |
| igt_create_fb(drm_fd, params.mode->hdisplay, params.mode->vdisplay, |
| DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, |
| ¶ms.fb); |
| |
| /* Even though we passed "true" as the tiling argument, double-check |
| * that the fb is really tiled. */ |
| gem_get_tiling(drm_fd, params.fb.gem_handle, &tiling, &swizzle); |
| igt_assert(tiling); |
| |
| buf_ptr = gem_mmap__gtt(drm_fd, params.fb.gem_handle, params.fb.size, |
| PROT_WRITE | PROT_READ); |
| for (i = 0; i < params.fb.size/sizeof(uint32_t); i++) |
| buf_ptr[i] = i; |
| |
| set_mode_for_params_and_wait(¶ms); |
| |
| disable_or_dpms_all_screens_and_wait(&ms_data, dpms); |
| |
| for (i = 0; i < params.fb.size/sizeof(uint32_t); i++) |
| igt_assert_eq(buf_ptr[i], i); |
| igt_assert(wait_for_suspended()); |
| |
| if (dpms) { |
| drmModeConnectorPtr c = NULL; |
| |
| for (i = 0; i < ms_data.res->count_connectors; i++) |
| if (ms_data.connectors[i]->connector_id == |
| params.connector_id) |
| c = ms_data.connectors[i]; |
| igt_assert(c); |
| |
| kmstest_set_connector_dpms(drm_fd, c, DRM_MODE_DPMS_ON); |
| } else { |
| set_mode_for_params(¶ms); |
| } |
| igt_assert(wait_for_active()); |
| |
| for (i = 0; i < params.fb.size/sizeof(uint32_t); i++) |
| igt_assert_eq(buf_ptr[i], i); |
| |
| igt_assert(munmap(buf_ptr, params.fb.size) == 0); |
| } |
| |
| int rounds = 10; |
| bool stay = false; |
| |
| static int opt_handler(int opt, int opt_index, void *data) |
| { |
| switch (opt) { |
| case 'l': |
| rounds = 50; |
| break; |
| case 's': |
| stay = true; |
| break; |
| default: |
| igt_assert(0); |
| } |
| |
| return 0; |
| } |
| |
| int main(int argc, char *argv[]) |
| { |
| const char *help_str = |
| " --stress\t\tMake the stress-tests more stressful.\n" |
| " --stay\t\tDisable all screen and try to go into runtime pm. Useful for debugging."; |
| static struct option long_options[] = { |
| {"stress", 0, 0, 'l'}, |
| {"stay", 0, 0, 's'}, |
| { 0, 0, 0, 0 } |
| }; |
| |
| igt_subtest_init_parse_opts(&argc, argv, "", long_options, |
| help_str, opt_handler, NULL); |
| |
| /* Skip instead of failing in case the machine is not prepared to reach |
| * PC8+. We don't want bug reports from cases where the machine is just |
| * not properly configured. */ |
| igt_fixture |
| setup_environment(); |
| |
| if (stay) |
| igt_subtest("stay") |
| stay_subtest(); |
| |
| /* Essential things */ |
| igt_subtest("basic-rte") |
| basic_subtest(); |
| igt_subtest("drm-resources-equal") |
| drm_resources_equal_subtest(); |
| igt_subtest("basic-pci-d3-state") |
| pci_d3_state_subtest(); |
| |
| /* Basic modeset */ |
| igt_subtest("modeset-lpsp") |
| modeset_subtest(SCREEN_TYPE_LPSP, 1, WAIT_STATUS); |
| igt_subtest("modeset-non-lpsp") |
| modeset_subtest(SCREEN_TYPE_NON_LPSP, 1, WAIT_STATUS); |
| igt_subtest("dpms-lpsp") |
| modeset_subtest(SCREEN_TYPE_LPSP, 1, WAIT_STATUS | USE_DPMS); |
| igt_subtest("dpms-non-lpsp") |
| modeset_subtest(SCREEN_TYPE_NON_LPSP, 1, WAIT_STATUS | USE_DPMS); |
| |
| /* GEM */ |
| igt_subtest("gem-mmap-cpu") |
| gem_mmap_subtest(false); |
| igt_subtest("gem-mmap-gtt") |
| gem_mmap_subtest(true); |
| igt_subtest("gem-pread") |
| gem_pread_subtest(); |
| igt_subtest("gem-execbuf") |
| gem_execbuf_subtest(); |
| igt_subtest("gem-idle") |
| gem_idle_subtest(); |
| igt_subtest("gem-evict-pwrite") |
| gem_evict_pwrite_subtest(); |
| |
| /* Planes and cursors */ |
| igt_subtest("cursor") |
| cursor_subtest(false); |
| igt_subtest("cursor-dpms") |
| cursor_subtest(true); |
| igt_subtest("legacy-planes") |
| planes_subtest(false, false); |
| igt_subtest("legacy-planes-dpms") |
| planes_subtest(false, true); |
| igt_subtest("universal-planes") |
| planes_subtest(true, false); |
| igt_subtest("universal-planes-dpms") |
| planes_subtest(true, true); |
| |
| /* Misc */ |
| igt_subtest("reg-read-ioctl") |
| reg_read_ioctl_subtest(); |
| igt_subtest("i2c") |
| i2c_subtest(); |
| igt_subtest("pc8-residency") |
| pc8_residency_subtest(); |
| igt_subtest("debugfs-read") |
| debugfs_read_subtest(); |
| igt_subtest("debugfs-forcewake-user") |
| debugfs_forcewake_user_subtest(); |
| igt_subtest("sysfs-read") |
| sysfs_read_subtest(); |
| igt_subtest("dpms-mode-unset-lpsp") |
| dpms_mode_unset_subtest(SCREEN_TYPE_LPSP); |
| igt_subtest("dpms-mode-unset-non-lpsp") |
| dpms_mode_unset_subtest(SCREEN_TYPE_NON_LPSP); |
| igt_subtest("fences") |
| fences_subtest(false); |
| igt_subtest("fences-dpms") |
| fences_subtest(true); |
| |
| /* Modeset stress */ |
| igt_subtest("modeset-lpsp-stress") |
| modeset_subtest(SCREEN_TYPE_LPSP, rounds, WAIT_STATUS); |
| igt_subtest("modeset-non-lpsp-stress") |
| modeset_subtest(SCREEN_TYPE_NON_LPSP, rounds, WAIT_STATUS); |
| igt_subtest("modeset-lpsp-stress-no-wait") |
| modeset_subtest(SCREEN_TYPE_LPSP, rounds, DONT_WAIT); |
| igt_subtest("modeset-non-lpsp-stress-no-wait") |
| modeset_subtest(SCREEN_TYPE_NON_LPSP, rounds, DONT_WAIT); |
| igt_subtest("modeset-pc8-residency-stress") |
| modeset_subtest(SCREEN_TYPE_ANY, rounds, WAIT_PC8_RES); |
| igt_subtest("modeset-stress-extra-wait") |
| modeset_subtest(SCREEN_TYPE_ANY, rounds, |
| WAIT_STATUS | WAIT_EXTRA); |
| |
| /* System suspend */ |
| igt_subtest("system-suspend") |
| system_suspend_subtest(); |
| igt_subtest("system-suspend-execbuf") |
| system_suspend_execbuf_subtest(); |
| igt_subtest("system-suspend-modeset") |
| system_suspend_modeset_subtest(); |
| |
| /* GEM stress */ |
| igt_subtest("gem-execbuf-stress") |
| gem_execbuf_stress_subtest(rounds, WAIT_STATUS); |
| igt_subtest("gem-execbuf-stress-pc8") |
| gem_execbuf_stress_subtest(rounds, WAIT_PC8_RES); |
| igt_subtest("gem-execbuf-stress-extra-wait") |
| gem_execbuf_stress_subtest(rounds, WAIT_STATUS | WAIT_EXTRA); |
| |
| /* power-wake reference tests */ |
| igt_subtest("pm-tiling") |
| pm_test_tiling(); |
| igt_subtest("pm-caching") |
| pm_test_caching(); |
| |
| igt_fixture |
| teardown_environment(); |
| |
| igt_exit(); |
| } |