| /* Shared library add-on to iptables for ECN, $Version$ |
| * |
| * (C) 2002 by Harald Welte <laforge@gnumonks.org> |
| * |
| * This program is distributed under the terms of GNU GPL v2, 1991 |
| * |
| * libipt_ECN.c borrowed heavily from libipt_DSCP.c |
| */ |
| #include <stdio.h> |
| #include <xtables.h> |
| #include <linux/netfilter_ipv4/ipt_ECN.h> |
| |
| enum { |
| O_ECN_TCP_REMOVE = 0, |
| O_ECN_TCP_CWR, |
| O_ECN_TCP_ECE, |
| O_ECN_IP_ECT, |
| F_ECN_TCP_REMOVE = 1 << O_ECN_TCP_REMOVE, |
| F_ECN_TCP_CWR = 1 << O_ECN_TCP_CWR, |
| F_ECN_TCP_ECE = 1 << O_ECN_TCP_ECE, |
| }; |
| |
| static void ECN_help(void) |
| { |
| printf( |
| "ECN target options\n" |
| " --ecn-tcp-remove Remove all ECN bits from TCP header\n"); |
| } |
| |
| #if 0 |
| "ECN target v%s EXPERIMENTAL options (use with extreme care!)\n" |
| " --ecn-ip-ect Set the IPv4 ECT codepoint (0 to 3)\n" |
| " --ecn-tcp-cwr Set the IPv4 CWR bit (0 or 1)\n" |
| " --ecn-tcp-ece Set the IPv4 ECE bit (0 or 1)\n", |
| #endif |
| |
| static const struct xt_option_entry ECN_opts[] = { |
| {.name = "ecn-tcp-remove", .id = O_ECN_TCP_REMOVE, .type = XTTYPE_NONE, |
| .excl = F_ECN_TCP_CWR | F_ECN_TCP_ECE}, |
| {.name = "ecn-tcp-cwr", .id = O_ECN_TCP_CWR, .type = XTTYPE_UINT8, |
| .min = 0, .max = 1, .excl = F_ECN_TCP_REMOVE}, |
| {.name = "ecn-tcp-ece", .id = O_ECN_TCP_ECE, .type = XTTYPE_UINT8, |
| .min = 0, .max = 1, .excl = F_ECN_TCP_REMOVE}, |
| {.name = "ecn-ip-ect", .id = O_ECN_IP_ECT, .type = XTTYPE_UINT8, |
| .min = 0, .max = 3}, |
| XTOPT_TABLEEND, |
| }; |
| |
| static void ECN_parse(struct xt_option_call *cb) |
| { |
| struct ipt_ECN_info *einfo = cb->data; |
| |
| xtables_option_parse(cb); |
| switch (cb->entry->id) { |
| case O_ECN_TCP_REMOVE: |
| einfo->operation = IPT_ECN_OP_SET_ECE | IPT_ECN_OP_SET_CWR; |
| einfo->proto.tcp.ece = 0; |
| einfo->proto.tcp.cwr = 0; |
| break; |
| case O_ECN_TCP_CWR: |
| einfo->operation |= IPT_ECN_OP_SET_CWR; |
| einfo->proto.tcp.cwr = cb->val.u8; |
| break; |
| case O_ECN_TCP_ECE: |
| einfo->operation |= IPT_ECN_OP_SET_ECE; |
| einfo->proto.tcp.ece = cb->val.u8; |
| break; |
| case O_ECN_IP_ECT: |
| einfo->operation |= IPT_ECN_OP_SET_IP; |
| einfo->ip_ect = cb->val.u8; |
| break; |
| } |
| } |
| |
| static void ECN_check(struct xt_fcheck_call *cb) |
| { |
| if (cb->xflags == 0) |
| xtables_error(PARAMETER_PROBLEM, |
| "ECN target: An operation is required"); |
| } |
| |
| static void ECN_print(const void *ip, const struct xt_entry_target *target, |
| int numeric) |
| { |
| const struct ipt_ECN_info *einfo = |
| (const struct ipt_ECN_info *)target->data; |
| |
| printf(" ECN"); |
| |
| if (einfo->operation == (IPT_ECN_OP_SET_ECE|IPT_ECN_OP_SET_CWR) |
| && einfo->proto.tcp.ece == 0 |
| && einfo->proto.tcp.cwr == 0) |
| printf(" TCP remove"); |
| else { |
| if (einfo->operation & IPT_ECN_OP_SET_ECE) |
| printf(" ECE=%u", einfo->proto.tcp.ece); |
| |
| if (einfo->operation & IPT_ECN_OP_SET_CWR) |
| printf(" CWR=%u", einfo->proto.tcp.cwr); |
| |
| if (einfo->operation & IPT_ECN_OP_SET_IP) |
| printf(" ECT codepoint=%u", einfo->ip_ect); |
| } |
| } |
| |
| static void ECN_save(const void *ip, const struct xt_entry_target *target) |
| { |
| const struct ipt_ECN_info *einfo = |
| (const struct ipt_ECN_info *)target->data; |
| |
| if (einfo->operation == (IPT_ECN_OP_SET_ECE|IPT_ECN_OP_SET_CWR) |
| && einfo->proto.tcp.ece == 0 |
| && einfo->proto.tcp.cwr == 0) |
| printf(" --ecn-tcp-remove"); |
| else { |
| |
| if (einfo->operation & IPT_ECN_OP_SET_ECE) |
| printf(" --ecn-tcp-ece %d", einfo->proto.tcp.ece); |
| |
| if (einfo->operation & IPT_ECN_OP_SET_CWR) |
| printf(" --ecn-tcp-cwr %d", einfo->proto.tcp.cwr); |
| |
| if (einfo->operation & IPT_ECN_OP_SET_IP) |
| printf(" --ecn-ip-ect %d", einfo->ip_ect); |
| } |
| } |
| |
| static struct xtables_target ecn_tg_reg = { |
| .name = "ECN", |
| .version = XTABLES_VERSION, |
| .family = NFPROTO_IPV4, |
| .size = XT_ALIGN(sizeof(struct ipt_ECN_info)), |
| .userspacesize = XT_ALIGN(sizeof(struct ipt_ECN_info)), |
| .help = ECN_help, |
| .print = ECN_print, |
| .save = ECN_save, |
| .x6_parse = ECN_parse, |
| .x6_fcheck = ECN_check, |
| .x6_options = ECN_opts, |
| }; |
| |
| void _init(void) |
| { |
| xtables_register_target(&ecn_tg_reg); |
| } |