Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / external / libavc / refs/tags/rel/11/fp3/8901.4.A.0017.3 / . / encoder / ih264e_error.h
blob: c11d857e2f019456b19bf4d21870e2b91487728c [file] [log] [blame]
Hamsalekha S8d3d3032015-03-13 21:24:58 +0530[diff] [blame]1/******************************************************************************
2 *
3 * Copyright (C) 2015 The Android Open Source Project
4 *
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at:
8 *
9 * http://www.apache.org/licenses/LICENSE-2.0
10 *
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
16 *
17 *****************************************************************************
18 * Originally developed and contributed by Ittiam Systems Pvt. Ltd, Bangalore
19*/
20
21/**
22*******************************************************************************
23* @file
24* ih264e_error.h
25*
26* @brief
27* Definitions related to error handling
28*
29* @author
30* ittiam
31*
32* @remarks
33* None
34*
35*******************************************************************************
36*/
37
38#ifndef IH264E_ERROR_H_
39#define IH264E_ERROR_H_
40
41/**
42******************************************************************************
43* @brief Error start codes for various classes of errors in H264 encoder
44******************************************************************************
45*/
46#define SET_ERROR_ON_RETURN(error, severity, out_status, ret_code) \
47 if (error != IH264E_SUCCESS) \
48 {\
49 out_status = ((1 << severity) | error);\
50 return (ret_code);\
51 }
52
53
54/**
55******************************************************************************
56 * @brief Extended error code for each error in H264 encoder
57******************************************************************************
58 */
59typedef enum
60{
61 /* NOTE: the ive error codes ends at 0x80 */
62 IVE_ERR_CODEC_EXTENSIONS = 0x80,
63
64 /* bit stream error start */
65 IH264E_BITSTREAM_ERROR_START = IVE_ERR_CODEC_EXTENSIONS,
66
67 /* codec error start */
68 IH264E_CODEC_ERROR_START = IH264E_BITSTREAM_ERROR_START + 0x10,
69
70 /** no error */
71 IH264E_SUCCESS = 0,
72
73 /** bitstream init failure, buffer ptr not aligned to WORD (32bits) */
74 IH264E_BITSTREAM_BUFPTR_ALIGN_FAIL = IH264E_BITSTREAM_ERROR_START + 0x01,
75
76 /** bitstream init failure, buf size not multiple of WORD size (32bits) */
77 IH264E_BITSTREAM_BUFSIZE_ALIGN_FAIL = IH264E_BITSTREAM_ERROR_START + 0x02,
78
79 /** bitstream runtime failure, buf size limit exceeded during encode */
80 IH264E_BITSTREAM_BUFFER_OVERFLOW = IH264E_BITSTREAM_ERROR_START + 0x03,
81
82 /**width not set within supported limit */
83 IH264E_WIDTH_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x01,
84
85 /**height not set within supported limit */
86 IH264E_HEIGHT_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x02,
87
88 /**Unsupported number of reference pictures passed as an argument */
89 IH264E_NUM_REF_UNSUPPORTED = IH264E_CODEC_ERROR_START + 0x03,
90
91 /**Unsupported number of reference pictures passed as an argument */
92 IH264E_NUM_REORDER_UNSUPPORTED = IH264E_CODEC_ERROR_START + 0x04,
93
94 /**codec level not supported */
95 IH264E_CODEC_LEVEL_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x05,
96
97 /**input chroma format not supported */
98 IH264E_INPUT_CHROMA_FORMAT_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x06,
99
100 /**recon chroma format not supported */
101 IH264E_RECON_CHROMA_FORMAT_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x07,
102
103 /**rate control option configured is not supported */
104 IH264E_RATE_CONTROL_MODE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x08,
105
106 /**frame rate configured is not supported */
107 IH264E_FRAME_RATE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x09,
108
109 /**bit rate configured is not supported */
110 IH264E_BITRATE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0A,
111
112 /**frame rate not supported */
113 IH264E_BFRAMES_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0B,
114
115 /**content type not supported */
116 IH264E_CONTENT_TYPE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0C,
117
118 /**unsupported horizontal search range */
119 IH264E_HORIZONTAL_SEARCH_RANGE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0D,
120
121 /**unsupported vertical search range */
122 IH264E_VERTICAL_SEARCH_RANGE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0E,
123
124 /**Unsupported slice type input */
125 IH264E_SLICE_TYPE_INPUT_INVALID = IH264E_CODEC_ERROR_START + 0x0F,
126
127 /**unsupported architecture type */
128 IH264E_ARCH_TYPE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x10,
129
130 /**unsupported soc type */
131 IH264E_SOC_TYPE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x11,
132
133 /**target frame rate exceeds source frame rate */
134 IH264E_TGT_FRAME_RATE_EXCEEDS_SRC_FRAME_RATE = IH264E_CODEC_ERROR_START + 0x12,
135
136 /**invalid force frame input */
137 IH264E_INVALID_FORCE_FRAME_INPUT = IH264E_CODEC_ERROR_START + 0x13,
138
139 /**invalid me speed preset */
140 IH264E_INVALID_ME_SPEED_PRESET = IH264E_CODEC_ERROR_START + 0x14,
141
142 /**invalid encoder speed preset */
143 IH264E_INVALID_ENC_SPEED_PRESET = IH264E_CODEC_ERROR_START + 0x15,
144
145 /**invalid deblocking param */
146 IH264E_INVALID_DEBLOCKING_TYPE_INPUT = IH264E_CODEC_ERROR_START + 0x16,
147
148 /**invalid max qp */
149 IH264E_INVALID_MAX_FRAME_QP = IH264E_CODEC_ERROR_START + 0x17,
150
151 /**invalid min qp */
152 IH264E_INVALID_MIN_FRAME_QP = IH264E_CODEC_ERROR_START + 0x18,
153
154 /**invalid init qp */
155 IH264E_INVALID_INIT_QP = IH264E_CODEC_ERROR_START + 0x19,
156
157 /**version buffer size is insufficient */
158 IH264E_CXA_VERS_BUF_INSUFFICIENT = IH264E_CODEC_ERROR_START + 0x1A,
159
160 /**init not done */
161 IH264E_INIT_NOT_DONE = IH264E_CODEC_ERROR_START + 0x1B,
162
163 /**invalid refresh type input */
164 IH264E_INVALID_AIR_MODE = IH264E_CODEC_ERROR_START + 0x1C,
165
166 /** Unsupported air mode */
167 IH264E_INVALID_AIR_REFRESH_PERIOD = IH264E_CODEC_ERROR_START + 0x1D,
168
169 /**In sufficient memory allocated for MV Bank */
170 IH264E_INSUFFICIENT_MEM_MVBANK = IH264E_CODEC_ERROR_START + 0x1E,
171
172 /**In sufficient memory allocated for MV Bank */
173 IH264E_INSUFFICIENT_MEM_PICBUF = IH264E_CODEC_ERROR_START + 0x1F,
174
175 /**Buffer manager error */
176 IH264E_BUF_MGR_ERROR = IH264E_CODEC_ERROR_START + 0x20,
177
178 /**No free MV Bank buffer available to store current pic */
179 IH264E_NO_FREE_MVBANK = IH264E_CODEC_ERROR_START + 0x21,
180
181 /**No free picture buffer available to store current pic */
182 IH264E_NO_FREE_PICBUF = IH264E_CODEC_ERROR_START + 0x22,
183
184 /**Invalid encoder operation mode */
185 IH264E_INVALID_ENC_OPERATION_MODE = IH264E_CODEC_ERROR_START + 0x23,
186
187 /**Invalid half pel option */
188 IH264E_INVALID_HALFPEL_OPTION = IH264E_CODEC_ERROR_START + 0x24,
189
190 /**Invalid quarter pel option */
191 IH264E_INVALID_QPEL_OPTION = IH264E_CODEC_ERROR_START + 0x25,
192
193 /**Invalid fast sad option */
194 IH264E_INVALID_FAST_SAD_OPTION = IH264E_CODEC_ERROR_START + 0x26,
195
196 /**Invalid intra 4x4 option */
197 IH264E_INVALID_INTRA4x4_OPTION = IH264E_CODEC_ERROR_START + 0x27,
198
199 /**Invalid intra frame interval */
200 IH264E_INVALID_INTRA_FRAME_INTERVAL = IH264E_CODEC_ERROR_START + 0x28,
201
202 /**Invalid idr frame interval */
203 IH264E_INVALID_IDR_FRAME_INTERVAL = IH264E_CODEC_ERROR_START + 0x29,
204
205 /**Invalid buffer delay */
206 IH264E_INVALID_BUFFER_DELAY = IH264E_CODEC_ERROR_START + 0x2A,
207
208 /**Invalid num cores */
209 IH264E_INVALID_NUM_CORES = IH264E_CODEC_ERROR_START + 0x2B,
210
211 /**profile not supported */
212 IH264E_PROFILE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x2C,
213
214 /**Unsupported slice type input */
215 IH264E_SLICE_PARAM_INPUT_INVALID = IH264E_CODEC_ERROR_START + 0x2D,
216
217 /**Invalid alt ref option */
218 IH264E_INVALID_ALT_REF_OPTION = IH264E_CODEC_ERROR_START + 0x2E,
219
220 /**No free picture buffer available to store recon pic */
Harinarayanan K Kd2d469e2015-06-19 14:45:44 +0530[diff] [blame]221 IH264E_NO_FREE_RECONBUF = IH264E_CODEC_ERROR_START + 0x2F,
222
223 /**Not enough memory allocated as output buffer */
224 IH264E_INSUFFICIENT_OUTPUT_BUFFER = IH264E_CODEC_ERROR_START + 0x30,
Hamsalekha S8d3d3032015-03-13 21:24:58 +0530[diff] [blame]225
Martin Storsjo5696adb2015-07-03 13:56:20 +0300[diff] [blame]226 /**Invalid entropy coding mode */
227 IH264E_INVALID_ENTROPY_CODING_MODE = IH264E_CODEC_ERROR_START + 0x31,
228
Doney Alex8668fbc2016-02-24 12:00:03 +0530[diff] [blame]229 /**Invalid Constrained Intra prediction mode */
230 IH264E_INVALID_CONSTRAINED_INTRA_PREDICTION_MODE = IH264E_CODEC_ERROR_START + 0x32,
231
Chamarthi Kishoread2eaf82019-10-01 11:59:43 +0530[diff] [blame]232 /**Invalid mastering display color volume sei params */
233 IH264E_INVALID_SEI_MDCV_PARAMS = IH264E_CODEC_ERROR_START + 0x33,
234
235 /**Invalid content light level sei params */
236 IH264E_INVALID_SEI_CLL_PARAMS = IH264E_CODEC_ERROR_START + 0x34,
237
238 /**Invalid ambient viewing environment sei params */
239 IH264E_INVALID_SEI_AVE_PARAMS = IH264E_CODEC_ERROR_START + 0x35,
240
241 /**Invalid content color volume sei params */
242 IH264E_INVALID_SEI_CCV_PARAMS = IH264E_CODEC_ERROR_START + 0x36,
243
Hamsalekha S8d3d3032015-03-13 21:24:58 +0530[diff] [blame]244 /**max failure error code to ensure enum is 32 bits wide */
245 IH264E_FAIL = -1,
246
247}IH264E_ERROR_T;
248
249
250#endif /* IH264E_ERROR_H_ */