blob: cd1da1d2ce9756cb0436a43821773c30b2f8c730 [file] [log] [blame]
2004-02-20 Miklos Szeredi <mszeredi@inf.bme.hu>
* more kernel interface changes:
* added nanosecond precision to file times
2004-02-19 Miklos Szeredi <mszeredi@inf.bme.hu>
* statfs library API changed to match other methods. Since this
is not backward compatible FUSE_MAJOR_VERSION is changed to 2
* kernel interface changes follow:
* statfs changed to 64 bits, added 'bavail' field
* add generation number to lookup result
* optimized mknod/mkdir/symlink/link (no separate lookup is
needed)
* rdev size increased to 32 bits for mknod
* kernel interface version changed to 3.1
2004-02-18 Miklos Szeredi <mszeredi@inf.bme.hu>
* user-mount upgraded for 2.6.3 kernel
2004-02-17 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added user-mount.2.6.2-rc3.patch
* Add FS_SAFE flag to fuse filesystem
* fusermount should allow (un)mounting for non-root even if not
suid-root
2004-02-12 Miklos Szeredi <mszeredi@inf.bme.hu>
* Remove MS_PERMISSION mount flag (that means something else now)
2004-02-10 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added check for i_size_read/write functions to configure.in
(patch by Valient Gough)
2004-02-06 Miklos Szeredi <mszeredi@inf.bme.hu>
* Fixed writing >= 2G files
* Check file size on open (with generic_file_open())
* Readpage calls flush_dcache_page() after storing data
* Use i_size_read/write for accessing inode->i_size
* Make loopback mount of a fuse file work
2004-02-04 Miklos Szeredi <mszeredi@inf.bme.hu>
* Released 1.1
2004-01-29 Miklos Szeredi <mszeredi@inf.bme.hu>
* Properly check if the inode exists in fuse_invalidate
2004-01-27 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added -q option for fusermount
* fuse_unmount() now uses -q option of fusermount, so no error is
printed if the cause of the program exit is that the filesystem
has already been unmounted
* Fix i_nlink correctness after rmdir/unlink
2004-01-26 Miklos Szeredi <mszeredi@inf.bme.hu>
* Released 1.1-pre2
2004-01-26 Miklos Szeredi <mszeredi@inf.bme.hu>
* Fix typo (thanks Marcos Dione)
* Compile fixes for 2.4 kernels
2004-01-23 Miklos Szeredi <mszeredi@inf.bme.hu>
* Fix CONFIG_MODVERSIONS compile on 2.6
2004-01-22 Miklos Szeredi <mszeredi@inf.bme.hu>
* Write all pending data before a RELEASE operation
* Suppress 'Bad file descriptor' warning on exit
* Replaced fusermount option '-d xxx' with '-n xxx' so it doesn't
get confused with '-d' of fuse_main() (sorry about this change)
* New fusermount option '-l' which enables big reads. Big reads
are now disabled by default.
* fuse_main() can accept fusermount arguments after a '--'
2004-01-19 Miklos Szeredi <mszeredi@inf.bme.hu>
* Support for exporting filesystem over NFS (see README.NFS)
2004-01-14 Miklos Szeredi <mszeredi@inf.bme.hu>
* Support non-blocking writepage on 2.6. This makes FUSE behave
much more nicely in low-memory situations
* Fix 32-bit dev handling in getattr and mknod for 2.6 kernels.
(Note: the mknod method does not yet use 32bit device number)
2004-01-13 Miklos Szeredi <mszeredi@inf.bme.hu>
* Code cleanups
2004-01-07 Miklos Szeredi <mszeredi@inf.bme.hu>
* Released 1.1-pre1
2004-01-06 Miklos Szeredi <mszeredi@inf.bme.hu>
* Integrated 2.6 kernel support patch by Michael Grigoriev
* Improvements and cleanups for 2.6 kernels
2004-01-05 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added -d option to fusermount
2003-12-15 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added major+minor version to library API, and minor version to
kernel API
2003-12-13 David McNab <david@rebirthing.co.nz>
* Implemented fsync support in examples/example.py
* Implemented 'fsync' and 'statfs' methods in python
interface
2003-12-12 Miklos Szeredi <mszeredi@inf.bme.hu>
* Make it compile on 2.4.19.
* Add fsync operation (write file failed on xemacs & vi)
2003-12-12 David McNab <david@rebirthing.co.nz>
* Added distutils support to the python module, as per standard
python development practice
2003-12-11 Miklos Szeredi <mszeredi@inf.bme.hu>
* Add file locking for mount/unmount (based on patch by Valient
Gough)
2003-12-11 David McNab <david@rebirthing.co.nz>
* Python filesystem - was broken with python2.3, now fixed:
- changed PyTuple_* calls to PySequence_*, because os.lstat
is no longer returning a pure tuple
- changed PyInt_Check() calls to also call PyLong_Check,
to cover for cases (eg os.lstat) where longs are returned
- Added support for file 'release' handling, which IMO is
essential since this signals to a FS that writes to a file
are complete (and therefore the file can now be disposed of
meaningfully at the python filesystem's discretion)
- Added '__init__' handler to base Fuse class, which allows
your Python class to know the mountpoint and mount args,
as attributes myfs.mountpoint, myfs.optlist, myfs.optdict
* General:
- added 'mount.fuse' script (in util/ dir), which is meant to be
symlinked from /sbin, and which allows FUSE filesystems to
be mounted with the 'mount' command, and listed in fstab;
also, mount arguments get passed to your filesystem
2003-11-04 Miklos Szeredi <mszeredi@inf.bme.hu>
* Fix kernel version detection (again). Bugreport by Peter Levart
2003-11-03 Miklos Szeredi <mszeredi@inf.bme.hu>
* Applied read combining patch by Michael Grigoriev (tested by
Valient Gough and Vincent Wagelaar)
2003-10-22 Miklos Szeredi <mszeredi@inf.bme.hu>
* Mtab handling fix in fusermount by "Valient Gough" (SF patch
#766443)
2003-10-13 Miklos Szeredi <mszeredi@inf.bme.hu>
* Error code fixes in kernel module
2003-10-04 Miklos Szeredi <mszeredi@inf.bme.hu>
* kernel version detection fix
* fusermount now uses "lazy" umount option
* fusermount can use modprobe with module-init-tools
2003-09-08 Miklos Szeredi <mszeredi@inf.bme.hu>
* Integrated caching patch by Michael Grigoriev
* Added "Filesystems" file with descriptions of projects using
FUSE
* Added patch by Michael Grigoriev to allow compliation of FUSE
kernel module for 2.6 kernels
2003-06-02 Miklos Szeredi <mszeredi@inf.bme.hu>
* And another spec-file fix by Achim Settelmeier
2003-05-26 Miklos Szeredi <mszeredi@inf.bme.hu>
* Spec-file fix by Achim Settelmeier
2003-03-10 Miklos Szeredi <mszeredi@inf.bme.hu>
* Fix umount oops (found by Samuli Kärkkäinen)
2003-03-05 Miklos Szeredi <mszeredi@inf.bme.hu>
* Merge of fuse_redhat.spec and fuse.spec by Achim Settelmeier
2003-03-04 Miklos Szeredi <mszeredi@inf.bme.hu>
* Updated fuse.spec file (Achim Settelmeier)
2003-02-19 Miklos Szeredi <mszeredi@inf.bme.hu>
* Version 1.0 released
2003-02-12 Miklos Szeredi <mszeredi@inf.bme.hu>
* SuSE compilation fix by Juan-Mariano de Goyeneche
2002-12-10 Miklos Szeredi <mszeredi@inf.bme.hu>
* The release() VFS call is now exported to the FUSE interface
2002-12-05 Miklos Szeredi <mszeredi@inf.bme.hu>
* 64 bit file offset fixes in the fuse kernel module
* Added function 'fuse_exit()' which can be used to exit the main
loop
2002-12-03 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added _FILE_OFFSET_BITS=64 define to fuse.h. Note, that this is
an incompatible interface change.
2002-10-28 Miklos Szeredi <mszeredi@inf.bme.hu>
* Portablility fix (bug reported by C. Chris Erway)
2002-10-25 Miklos Szeredi <mszeredi@inf.bme.hu>
* Use Mark Glines' fd passing method for default operation instead
of old reexec
2002-10-22 Miklos Szeredi <mszeredi@inf.bme.hu>
* fix "Stale NFS file handle" bug caused by changes in 2.4.19
2002-10-22 Miklos Szeredi <mszeredi@inf.bme.hu>
* fix incompatiblity with Red Hat kernels, with help from Nathan
Thompson-Amato.
2002-04-18 Mark Glines <mark@glines.org>
* added an alternative to fuse_mount(), called
fuse_mount_ioslave(), which does not need to reexec the
FUSE program.
* added a small helper util needed by fuse_mount_ioslave().
2002-03-16 Mark Glines <mark@glines.org>
* use struct fuse_statfs everywhere possible to avoid problems
with the headerfiles changing struct statfs member sizes
2002-03-01 Miklos Szeredi <mszeredi@inf.bme.hu>
* Another RPM spec file for RedHat >= 7 by Ian Pilcher
2002-01-14 Miklos Szeredi <mszeredi@inf.bme.hu>
* RPM support by Achim Settelmeier
2002-01-09 Miklos Szeredi <mszeredi@inf.bme.hu>
* Version 0.95 released
2002-01-09 Miklos Szeredi <mszeredi@inf.bme.hu>
* Revaidate all path components not just the last, this means a
very small performance penalty for being more up-to-date.
2002-01-08 Miklos Szeredi <mszeredi@inf.bme.hu>
* Update and fix python interface
2002-01-07 Mark Glines <mark@glines.org>
* Added statfs() support to kernel, lib, examples, and perl!
2001-12-26 Miklos Szeredi <mszeredi@inf.bme.hu>
* Better cross compilation support
* Ported to Compaq IPAQ
2001-12-20 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added function fuse_get_context() to library API (inspired by
patch from Matt Ryan)
* Added flags to fusermount and to kernel interface to control
permission checking
* Integrated fuse_set_operations() into fuse_new()
2001-12-08 Miklos Szeredi <mszeredi@inf.bme.hu>
* Applied header protection + extern "C" patch by Roland
Bauerschmidt
2001-12-02 Miklos Szeredi <mszeredi@inf.bme.hu>
* Added perl bindings by Mark Glines
2001-11-21 Miklos Szeredi <mszeredi@inf.bme.hu>
* Cleaned up way of mounting simple filesystems.
* fuse_main() helper function added
2001-11-18 Miklos Szeredi <mszeredi@inf.bme.hu>
* Optimized read/write operations, so that minimal copying of data
is done
2001-11-14 Miklos Szeredi <mszeredi@inf.bme.hu>
* Python bindings by Jeff Epler added
2001-11-13 Miklos Szeredi <mszeredi@inf.bme.hu>
* Fixed vfsmount reference leak in fuse_follow_link
* FS blocksize is set to PAGE_CACHE_SIZE, blksize attribute from
userspace is ignored
2001-11-09 Miklos Szeredi <mszeredi@inf.bme.hu>
* Started ChangeLog