| /* Copyright (C)2004 Landmark Graphics Corporation |
| * Copyright (C)2005, 2006 Sun Microsystems, Inc. |
| * Copyright (C)2009-2011 D. R. Commander |
| * |
| * This library is free software and may be redistributed and/or modified under |
| * the terms of the wxWindows Library License, Version 3.1 or (at your option) |
| * any later version. The full license is in the LICENSE.txt file included |
| * with this distribution. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * wxWindows Library License for more details. |
| */ |
| |
| #if (defined(_MSC_VER) || defined(__CYGWIN__) || defined(__MINGW32__)) && defined(_WIN32) && defined(DLLDEFINE) |
| #define DLLEXPORT __declspec(dllexport) |
| #else |
| #define DLLEXPORT |
| #endif |
| |
| #define DLLCALL |
| |
| /* Subsampling */ |
| #define NUMSUBOPT 4 |
| |
| enum {TJ_444=0, TJ_422, TJ_420, TJ_GRAYSCALE}; |
| #define TJ_411 TJ_420 /* for backward compatibility with VirtualGL <= 2.1.x, |
| TurboVNC <= 0.6, and TurboJPEG/IPP */ |
| |
| /* Flags */ |
| #define TJ_BGR 1 |
| /* The components of each pixel in the source/destination bitmap are stored |
| in B,G,R order, not R,G,B */ |
| #define TJ_BOTTOMUP 2 |
| /* The source/destination bitmap is stored in bottom-up (Windows, OpenGL) |
| order, not top-down (X11) order */ |
| #define TJ_FORCEMMX 8 |
| /* Turn off CPU auto-detection and force TurboJPEG to use MMX code |
| (IPP and 32-bit libjpeg-turbo versions only) */ |
| #define TJ_FORCESSE 16 |
| /* Turn off CPU auto-detection and force TurboJPEG to use SSE code |
| (32-bit IPP and 32-bit libjpeg-turbo versions only) */ |
| #define TJ_FORCESSE2 32 |
| /* Turn off CPU auto-detection and force TurboJPEG to use SSE2 code |
| (32-bit IPP and 32-bit libjpeg-turbo versions only) */ |
| #define TJ_ALPHAFIRST 64 |
| /* If the source/destination bitmap is 32 bpp, assume that each pixel is |
| ARGB/XRGB (or ABGR/XBGR if TJ_BGR is also specified) */ |
| #define TJ_FORCESSE3 128 |
| /* Turn off CPU auto-detection and force TurboJPEG to use SSE3 code |
| (64-bit IPP version only) */ |
| #define TJ_FASTUPSAMPLE 256 |
| /* Use fast, inaccurate 4:2:2 and 4:2:0 YUV upsampling routines |
| (libjpeg and libjpeg-turbo versions only) */ |
| #define TJ_YUV 512 |
| /* Nothing to see here. Pay no attention to the man behind the curtain. */ |
| |
| /* Transform operations for tjTransform() */ |
| #define NUMXFORMOPT 8 |
| |
| enum { |
| TJXFORM_NONE=0, /* Do not transform the position of the image pixels */ |
| TJXFORM_HFLIP, /* Flip (mirror) image horizontally. This transform is |
| imperfect if there are any partial MCU blocks on the |
| right edge (see below for explanation.) */ |
| TJXFORM_VFLIP, /* Flip (mirror) image vertically. This transform is |
| imperfect if there are any partial MCU blocks on the |
| bottom edge. */ |
| TJXFORM_TRANSPOSE, /* Transpose image (flip/mirror along upper left to lower |
| right axis.) This transform is always perfect. */ |
| TJXFORM_TRANSVERSE, /* Transpose image (flip/mirror along upper right to lower |
| left axis.) This transform is imperfect if there are |
| any partial MCU blocks in the image. */ |
| TJXFORM_ROT90, /* Rotate image clockwise by 90 degrees. This transform |
| is imperfect if there are any partial MCU blocks on the |
| bottom edge. */ |
| TJXFORM_ROT180, /* Rotate image 180 degrees. This transform is imperfect |
| if there are any partial MCU blocks in the image. */ |
| TJXFORM_ROT270 /* Rotate image counter-clockwise by 90 degrees. This |
| transform is imperfect if there are any partial MCU |
| blocks on the right edge. */ |
| }; |
| |
| /* Transform options (these can be OR'ed together) */ |
| #define TJXFORM_PERFECT 1 |
| /* This will cause the tjTransform() function to return an error if the |
| transform is not perfect. Lossless transforms operate on MCU blocks, |
| which are 8x8 pixels if no chrominance subsampling is used, or 16x8 for |
| 4:2:2 or 16x16 for 4:2:0. If the image's width or height is not evenly |
| divisible by the MCU size, then there will be partial MCU blocks on the |
| right and/or bottom edges. It is not possible to move these partial MCU |
| blocks to the top or left of the image, so any transform that would |
| require that is "imperfect." If this option is not specified, then any |
| partial MCU blocks that cannot be transformed will be left in place, which |
| will create odd-looking strips on the right or bottom edge of the image. |
| */ |
| #define TJXFORM_TRIM 2 |
| /* This option will cause tjTransform() to discard any partial MCU blocks |
| that cannot be transformed. */ |
| #define TJXFORM_CROP 4 |
| /* This option will enable lossless cropping. See the description of |
| tjTransform() below for more information. */ |
| #define TJXFORM_GRAY 8 |
| /* This option will discard the color data in the input image and produce |
| a grayscale output image. */ |
| |
| typedef void* tjhandle; |
| |
| #define TJPAD(p) (((p)+3)&(~3)) |
| #ifndef max |
| #define max(a,b) ((a)>(b)?(a):(b)) |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* API follows */ |
| |
| |
| /* |
| tjhandle tjInitCompress(void) |
| |
| Creates a new JPEG compressor instance, allocates memory for the structures, |
| and returns a handle to the instance. Most applications will only |
| need to call this once at the beginning of the program or once for each |
| concurrent thread. Don't try to create a new instance every time you |
| compress an image, because this may cause performance to suffer in some |
| TurboJPEG implementations. |
| |
| RETURNS: NULL on error |
| */ |
| DLLEXPORT tjhandle DLLCALL tjInitCompress(void); |
| |
| |
| /* |
| int tjCompress(tjhandle j, |
| unsigned char *srcbuf, int width, int pitch, int height, int pixelsize, |
| unsigned char *dstbuf, unsigned long *size, |
| int jpegsubsamp, int jpegqual, int flags) |
| |
| [INPUT] j = instance handle previously returned from a call to |
| tjInitCompress() or tjInitTransform() |
| [INPUT] srcbuf = pointer to user-allocated image buffer containing RGB or |
| grayscale pixels to be compressed |
| [INPUT] width = width (in pixels) of the source image |
| [INPUT] pitch = bytes per line of the source image (width*pixelsize if the |
| bitmap is unpadded, else TJPAD(width*pixelsize) if each line of the bitmap |
| is padded to the nearest 32-bit boundary, such as is the case for Windows |
| bitmaps. You can also be clever and use this parameter to skip lines, |
| etc. Setting this parameter to 0 is the equivalent of setting it to |
| width*pixelsize. |
| [INPUT] height = height (in pixels) of the source image |
| [INPUT] pixelsize = size (in bytes) of each pixel in the source image |
| RGBX/BGRX/XRGB/XBGR: 4, RGB/BGR: 3, Grayscale: 1 |
| [INPUT] dstbuf = pointer to user-allocated image buffer which will receive |
| the JPEG image. Use the TJBUFSIZE(width, height) function to determine |
| the appropriate size for this buffer based on the image width and height. |
| [OUTPUT] size = pointer to unsigned long which receives the size (in bytes) |
| of the compressed image |
| [INPUT] jpegsubsamp = Specifies either 4:2:0, 4:2:2, 4:4:4, or grayscale |
| subsampling. When the image is converted from the RGB to YCbCr colorspace |
| as part of the JPEG compression process, every other Cb and Cr |
| (chrominance) pixel can be discarded to produce a smaller image with |
| little perceptible loss of image clarity (the human eye is more sensitive |
| to small changes in brightness than small changes in color.) |
| |
| TJ_420: 4:2:0 subsampling. Discards every other Cb, Cr pixel in both |
| horizontal and vertical directions |
| TJ_422: 4:2:2 subsampling. Discards every other Cb, Cr pixel only in |
| the horizontal direction |
| TJ_444: no subsampling |
| TJ_GRAYSCALE: Generate grayscale JPEG image |
| |
| [INPUT] jpegqual = JPEG quality (an integer between 0 and 100 inclusive) |
| [INPUT] flags = the bitwise OR of one or more of the flags described in the |
| "Flags" section above |
| |
| RETURNS: 0 on success, -1 on error |
| */ |
| DLLEXPORT int DLLCALL tjCompress(tjhandle j, |
| unsigned char *srcbuf, int width, int pitch, int height, int pixelsize, |
| unsigned char *dstbuf, unsigned long *size, |
| int jpegsubsamp, int jpegqual, int flags); |
| |
| |
| /* |
| unsigned long TJBUFSIZE(int width, int height) |
| |
| Convenience function which returns the maximum size of the buffer required to |
| hold a JPEG image with the given width and height |
| |
| RETURNS: -1 if arguments are out of bounds |
| */ |
| DLLEXPORT unsigned long DLLCALL TJBUFSIZE(int width, int height); |
| |
| |
| /* |
| unsigned long TJBUFSIZEYUV(int width, int height, int subsamp) |
| |
| Convenience function which returns the size of the buffer required to |
| hold a YUV planar image with the given width, height, and level of |
| chrominance subsampling |
| |
| RETURNS: -1 if arguments are out of bounds |
| */ |
| DLLEXPORT unsigned long DLLCALL TJBUFSIZEYUV(int width, int height, |
| int subsamp); |
| |
| |
| /* |
| int tjEncodeYUV(tjhandle j, |
| unsigned char *srcbuf, int width, int pitch, int height, int pixelsize, |
| unsigned char *dstbuf, int subsamp, int flags) |
| |
| This function uses the accelerated color conversion routines in TurboJPEG's |
| underlying codec to produce a planar YUV image that is suitable for X Video. |
| Specifically, if the chrominance components are subsampled along the |
| horizontal dimension, then the width of the luminance plane is padded to 2 in |
| the output image (same goes for the height of the luminance plane, if the |
| chrominance components are subsampled along the vertical dimension.) Also, |
| each line of each plane in the output image is padded to 4 bytes. Although |
| this will work with any subsampling option, it is really only useful in |
| combination with TJ_420, which produces an image compatible with the I420 |
| (AKA "YUV420P") format. |
| |
| [INPUT] j = instance handle previously returned from a call to |
| tjInitCompress() or tjInitTransform() |
| [INPUT] srcbuf = pointer to user-allocated image buffer containing RGB or |
| grayscale pixels to be encoded |
| [INPUT] width = width (in pixels) of the source image |
| [INPUT] pitch = bytes per line of the source image (width*pixelsize if the |
| bitmap is unpadded, else TJPAD(width*pixelsize) if each line of the bitmap |
| is padded to the nearest 32-bit boundary, such as is the case for Windows |
| bitmaps. You can also be clever and use this parameter to skip lines, |
| etc. Setting this parameter to 0 is the equivalent of setting it to |
| width*pixelsize. |
| [INPUT] height = height (in pixels) of the source image |
| [INPUT] pixelsize = size (in bytes) of each pixel in the source image |
| RGBX/BGRX/XRGB/XBGR: 4, RGB/BGR: 3, Grayscale: 1 |
| [INPUT] dstbuf = pointer to user-allocated image buffer which will receive |
| the YUV image. Use the TJBUFSIZEYUV(width, height, subsamp) function to |
| determine the appropriate size for this buffer based on the image width, |
| height, and level of subsampling. |
| [INPUT] subsamp = Specifies either 4:2:0, 4:2:2, 4:4:4, or grayscale |
| subsampling (see description under tjCompress()) |
| [INPUT] flags = the bitwise OR of one or more of the flags described in the |
| "Flags" section above |
| |
| RETURNS: 0 on success, -1 on error |
| */ |
| DLLEXPORT int DLLCALL tjEncodeYUV(tjhandle j, |
| unsigned char *srcbuf, int width, int pitch, int height, int pixelsize, |
| unsigned char *dstbuf, int subsamp, int flags); |
| |
| |
| /* |
| tjhandle tjInitDecompress(void) |
| |
| Creates a new JPEG decompressor instance, allocates memory for the |
| structures, and returns a handle to the instance. Most applications will |
| only need to call this once at the beginning of the program or once for each |
| concurrent thread. Don't try to create a new instance every time you |
| decompress an image, because this may cause performance to suffer in some |
| TurboJPEG implementations. |
| |
| RETURNS: NULL on error |
| */ |
| DLLEXPORT tjhandle DLLCALL tjInitDecompress(void); |
| |
| |
| /* |
| int tjDecompressHeader2(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| int *width, int *height, int *jpegsubsamp) |
| |
| [INPUT] j = instance handle previously returned from a call to |
| tjInitDecompress() or tjInitTransform() |
| [INPUT] srcbuf = pointer to a user-allocated buffer containing a JPEG image |
| [INPUT] size = size of the JPEG image buffer (in bytes) |
| [OUTPUT] width = width (in pixels) of the JPEG image |
| [OUTPUT] height = height (in pixels) of the JPEG image |
| [OUTPUT] jpegsubsamp = type of chrominance subsampling used when compressing |
| the JPEG image |
| |
| RETURNS: 0 on success, -1 on error |
| */ |
| DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| int *width, int *height, int *jpegsubsamp); |
| |
| /* |
| Legacy version of the above function |
| */ |
| DLLEXPORT int DLLCALL tjDecompressHeader(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| int *width, int *height); |
| |
| |
| /* |
| int tjGetScaledSize(int input_width, int input_height, |
| int *output_width, int *output_height) |
| |
| [INPUT] input_width = width (in pixels) of the JPEG image |
| [INPUT] input_height = height (in pixels) of the JPEG image |
| [INPUT/OUTPUT] output_width, output_height = Before calling this function, |
| *output_width and *output_height should be set to the desired dimensions |
| of the output image. Upon returning from this function, they will be set |
| to the dimensions of the largest scaled down image that TurboJPEG can |
| produce without exceeding the desired dimensions. If either *output_width |
| or *output_height is set to 0, then the corresponding dimension will not |
| be considered when determining the scaled image size. |
| |
| RETURNS: 0 on success, -1 if arguments are out of bounds |
| */ |
| DLLEXPORT int DLLCALL tjGetScaledSize(int input_width, int input_height, |
| int *output_width, int *output_height); |
| |
| |
| /* |
| int tjDecompress(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| unsigned char *dstbuf, int width, int pitch, int height, int pixelsize, |
| int flags) |
| |
| [INPUT] j = instance handle previously returned from a call to |
| tjInitDecompress() or tjInitTransform() |
| [INPUT] srcbuf = pointer to a user-allocated buffer containing the JPEG image |
| to decompress |
| [INPUT] size = size of the JPEG image buffer (in bytes) |
| [INPUT] dstbuf = pointer to user-allocated image buffer which will receive |
| the bitmap image. This buffer should normally be pitch*scaled_height |
| bytes in size, where scaled_height is determined by calling |
| tjGetScaledSize() with the height of the desired output image. This |
| pointer may also be used to decompress into a specific region of a |
| larger buffer. |
| [INPUT] width = desired width (in pixels) of the destination image. If this |
| is smaller than the width of the JPEG image being decompressed, then |
| TurboJPEG will use scaling in the JPEG decompressor to generate the |
| largest possible image that will fit within the desired width. If width |
| is set to 0, then only the height will be considered when determining the |
| scaled image size. |
| [INPUT] pitch = bytes per line of the destination image. Normally, this is |
| scaled_width*pixelsize if the bitmap image is unpadded, else |
| TJPAD(scaled_width*pixelsize) if each line of the bitmap is padded to the |
| nearest 32-bit boundary, such as is the case for Windows bitmaps. |
| (NOTE: scaled_width can be determined by calling tjGetScaledSize().) You |
| can also be clever and use this parameter to skip lines, etc. Setting |
| this parameter to 0 is the equivalent of setting it to |
| scaled_width*pixelsize. |
| [INPUT] height = desired height (in pixels) of the destination image. If |
| this is smaller than the height of the JPEG image being decompressed, then |
| TurboJPEG will use scaling in the JPEG decompressor to generate the |
| largest possible image that will fit within the desired height. If |
| height is set to 0, then only the width will be considered when |
| determining the scaled image size. |
| [INPUT] pixelsize = size (in bytes) of each pixel in the destination image |
| RGBX/BGRX/XRGB/XBGR: 4, RGB/BGR: 3, Grayscale: 1 |
| [INPUT] flags = the bitwise OR of one or more of the flags described in the |
| "Flags" section above. |
| |
| RETURNS: 0 on success, -1 on error |
| */ |
| DLLEXPORT int DLLCALL tjDecompress(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| unsigned char *dstbuf, int width, int pitch, int height, int pixelsize, |
| int flags); |
| |
| |
| /* |
| int tjDecompressToYUV(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| unsigned char *dstbuf, int flags) |
| |
| This function performs JPEG decompression but leaves out the color conversion |
| step, so a planar YUV image is generated instead of an RGB image. The |
| padding of the planes in this image is the same as in tjEncodeYUV(). |
| Note that, if the width or height of the output image is not a multiple of 8 |
| (or a multiple of 16 along any dimension in which chrominance subsampling is |
| used), then an intermediate buffer copy will be performed within TurboJPEG. |
| |
| [INPUT] j = instance handle previously returned from a call to |
| tjInitDecompress() or tjInitTransform() |
| [INPUT] srcbuf = pointer to a user-allocated buffer containing the JPEG image |
| to decompress |
| [INPUT] size = size of the JPEG image buffer (in bytes) |
| [INPUT] dstbuf = pointer to user-allocated image buffer which will receive |
| the YUV image. Use the TJBUFSIZEYUV(width, height, subsamp) function to |
| determine the appropriate size for this buffer based on the image width, |
| height, and level of subsampling. |
| [INPUT] flags = the bitwise OR of one or more of the flags described in the |
| "Flags" section above. |
| |
| RETURNS: 0 on success, -1 on error |
| */ |
| DLLEXPORT int DLLCALL tjDecompressToYUV(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| unsigned char *dstbuf, int flags); |
| |
| |
| /* |
| tjhandle tjInitTransform(void) |
| |
| Creates a new JPEG transformer instance, allocates memory for the structures, |
| and returns a handle to the instance. Most applications will only need to |
| call this once at the beginning of the program or once for each concurrent |
| thread. Don't try to create a new instance every time you transform an |
| image, because this may cause performance to suffer in some TurboJPEG |
| implementations. |
| |
| RETURNS: NULL on error |
| */ |
| DLLEXPORT tjhandle DLLCALL tjInitTransform(void); |
| |
| |
| /* |
| int tjTransform(tjhandle j, |
| unsigned char *srcbuf, unsigned long srcsize, |
| unsigned char *dstbuf, unsigned long *dstsize, |
| int x, int y, int w, int h, int op, int options, int flags) |
| |
| [INPUT] j = instance handle previously returned from a call to |
| tjInitTransform() |
| [INPUT] srcbuf = pointer to a user-allocated buffer containing the JPEG image |
| to transform |
| [INPUT] srcsize = size of the source JPEG image buffer (in bytes) |
| [INPUT] dstbuf = pointer to user-allocated image buffer which will receive |
| the transformed JPEG image. Use the TJBUFSIZE(width, height) function to |
| determine the appropriate size for this buffer based on the cropped width |
| and height. |
| [OUTPUT] dstsize = pointer to unsigned long which receives the size (in |
| bytes) of the transformed image |
| [INPUT] x, y, w, h = the left edge, top edge, width, and height of the |
| cropping region. If (x, y) does not fall on an MCU boundary, then x and |
| y will be silently moved left and/or up to the nearest MCU boundary. You |
| can call tjGetCroppedSize() to determine how (or if) x, y, w, and h will |
| be modified ahead of time, so you can allocate the output buffer |
| appropriately. |
| [INPUT] op = one of the transform operations described in the "Transform |
| operations" section above. |
| [INPUT] options = the bitwise OR of one or more of the transform options |
| described in the "Transform options" section above. |
| [INPUT] flags = the bitwise OR of one or more of the flags described in the |
| "Flags" section above. |
| |
| RETURNS: 0 on success, -1 on error |
| */ |
| DLLEXPORT int DLLCALL tjTransform(tjhandle j, |
| unsigned char *srcbuf, unsigned long size, |
| unsigned char *dstbuf, unsigned long *dstsize, |
| int x, int y, int w, int h, int op, int options, int flags); |
| |
| |
| /* |
| int tjDestroy(tjhandle h) |
| |
| Frees structures associated with a compression or decompression instance |
| |
| [INPUT] h = instance handle (returned from a previous call to |
| tjInitCompress(), tjInitDecompress(), or tjInitTransform() |
| |
| RETURNS: 0 on success, -1 on error |
| */ |
| DLLEXPORT int DLLCALL tjDestroy(tjhandle h); |
| |
| |
| /* |
| char *tjGetErrorStr(void) |
| |
| Returns a descriptive error message explaining why the last command failed |
| */ |
| DLLEXPORT char* DLLCALL tjGetErrorStr(void); |
| |
| #ifdef __cplusplus |
| } |
| #endif |