| IJG JPEG LIBRARY: FILE LIST |
| |
| Copyright (C) 1994-2010, Thomas G. Lane, Guido Vollbeding, D. R. Commander. |
| This file is part of the Independent JPEG Group's software. |
| For conditions of distribution and use, see the accompanying README file. |
| |
| |
| Here is a road map to the files in the IJG JPEG distribution. The |
| distribution includes the JPEG library proper, plus two application |
| programs ("cjpeg" and "djpeg") which use the library to convert JPEG |
| files to and from some other popular image formats. A third application |
| "jpegtran" uses the library to do lossless conversion between different |
| variants of JPEG. There are also two stand-alone applications, |
| "rdjpgcom" and "wrjpgcom". |
| |
| |
| THE JPEG LIBRARY |
| ================ |
| |
| Include files: |
| |
| jpeglib.h JPEG library's exported data and function declarations. |
| jconfig.h Configuration declarations. Note: this file is not present |
| in the distribution; it is generated during installation. |
| jmorecfg.h Additional configuration declarations; need not be changed |
| for a standard installation. |
| jerror.h Declares JPEG library's error and trace message codes. |
| jinclude.h Central include file used by all IJG .c files to reference |
| system include files. |
| jpegint.h JPEG library's internal data structures. |
| jchuff.h Private declarations for Huffman encoder modules. |
| jdhuff.h Private declarations for Huffman decoder modules. |
| jdct.h Private declarations for forward & reverse DCT subsystems. |
| jmemsys.h Private declarations for memory management subsystem. |
| jversion.h Version information. |
| |
| Applications using the library should include jpeglib.h (which in turn |
| includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included |
| if the application needs to reference individual JPEG error codes. The |
| other include files are intended for internal use and would not normally |
| be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, |
| since its function is to improve portability of the whole IJG distribution. |
| Most other applications will directly include the system include files they |
| want, and hence won't need jinclude.h.) |
| |
| |
| C source code files: |
| |
| These files contain most of the functions intended to be called directly by |
| an application program: |
| |
| jcapimin.c Application program interface: core routines for compression. |
| jcapistd.c Application program interface: standard compression. |
| jdapimin.c Application program interface: core routines for decompression. |
| jdapistd.c Application program interface: standard decompression. |
| jcomapi.c Application program interface routines common to compression |
| and decompression. |
| jcparam.c Compression parameter setting helper routines. |
| jctrans.c API and library routines for transcoding compression. |
| jdtrans.c API and library routines for transcoding decompression. |
| |
| Compression side of the library: |
| |
| jcinit.c Initialization: determines which other modules to use. |
| jcmaster.c Master control: setup and inter-pass sequencing logic. |
| jcmainct.c Main buffer controller (preprocessor => JPEG compressor). |
| jcprepct.c Preprocessor buffer controller. |
| jccoefct.c Buffer controller for DCT coefficient buffer. |
| jccolor.c Color space conversion. |
| jcsample.c Downsampling. |
| jcdctmgr.c DCT manager (DCT implementation selection & control). |
| jfdctint.c Forward DCT using slow-but-accurate integer method. |
| jfdctfst.c Forward DCT using faster, less accurate integer method. |
| jfdctflt.c Forward DCT using floating-point arithmetic. |
| jchuff.c Huffman entropy coding for sequential JPEG. |
| jcphuff.c Huffman entropy coding for progressive JPEG. |
| jcarith.c Arithmetic entropy coding. |
| jcmarker.c JPEG marker writing. |
| jdatadst.c Data destination managers for memory and stdio output. |
| |
| Decompression side of the library: |
| |
| jdmaster.c Master control: determines which other modules to use. |
| jdinput.c Input controller: controls input processing modules. |
| jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). |
| jdcoefct.c Buffer controller for DCT coefficient buffer. |
| jdpostct.c Postprocessor buffer controller. |
| jdmarker.c JPEG marker reading. |
| jdhuff.c Huffman entropy decoding for sequential JPEG. |
| jdphuff.c Huffman entropy decoding for progressive JPEG. |
| jdarith.c Arithmetic entropy decoding. |
| jddctmgr.c IDCT manager (IDCT implementation selection & control). |
| jidctint.c Inverse DCT using slow-but-accurate integer method. |
| jidctfst.c Inverse DCT using faster, less accurate integer method. |
| jidctflt.c Inverse DCT using floating-point arithmetic. |
| jidctred.c Inverse DCTs with reduced-size outputs. |
| jdsample.c Upsampling. |
| jdcolor.c Color space conversion. |
| jdmerge.c Merged upsampling/color conversion (faster, lower quality). |
| jquant1.c One-pass color quantization using a fixed-spacing colormap. |
| jquant2.c Two-pass color quantization using a custom-generated colormap. |
| Also handles one-pass quantization to an externally given map. |
| jdatasrc.c Data source managers for memory and stdio input. |
| |
| Support files for both compression and decompression: |
| |
| jaricom.c Tables for common use in arithmetic entropy encoding and |
| decoding routines. |
| jerror.c Standard error handling routines (application replaceable). |
| jmemmgr.c System-independent (more or less) memory management code. |
| jutils.c Miscellaneous utility routines. |
| |
| jmemmgr.c relies on a system-dependent memory management module. The IJG |
| distribution includes the following implementations of the system-dependent |
| module: |
| |
| jmemnobs.c "No backing store": assumes adequate virtual memory exists. |
| jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). |
| jmemname.c Makes temporary files with program-generated file names. |
| jmemdos.c Custom implementation for MS-DOS (16-bit environment only): |
| can use extended and expanded memory as well as temp files. |
| jmemmac.c Custom implementation for Apple Macintosh. |
| |
| Exactly one of the system-dependent modules should be configured into an |
| installed JPEG library (see install.txt for hints about which one to use). |
| On unusual systems you may find it worthwhile to make a special |
| system-dependent memory manager. |
| |
| |
| Non-C source code files: |
| |
| jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in |
| MS-DOS-specific configurations of the JPEG library. |
| |
| |
| CJPEG/DJPEG/JPEGTRAN |
| ==================== |
| |
| Include files: |
| |
| cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. |
| cderror.h Additional error and trace message codes for cjpeg et al. |
| transupp.h Declarations for jpegtran support routines in transupp.c. |
| |
| C source code files: |
| |
| cjpeg.c Main program for cjpeg. |
| djpeg.c Main program for djpeg. |
| jpegtran.c Main program for jpegtran. |
| cdjpeg.c Utility routines used by all three programs. |
| rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. |
| rdswitch.c Code to process some of cjpeg's more complex switches. |
| Also used by jpegtran. |
| transupp.c Support code for jpegtran: lossless image manipulations. |
| |
| Image file reader modules for cjpeg: |
| |
| rdbmp.c BMP file input. |
| rdgif.c GIF file input (now just a stub). |
| rdppm.c PPM/PGM file input. |
| rdrle.c Utah RLE file input. |
| rdtarga.c Targa file input. |
| |
| Image file writer modules for djpeg: |
| |
| wrbmp.c BMP file output. |
| wrgif.c GIF file output (a mere shadow of its former self). |
| wrppm.c PPM/PGM file output. |
| wrrle.c Utah RLE file output. |
| wrtarga.c Targa file output. |
| |
| |
| RDJPGCOM/WRJPGCOM |
| ================= |
| |
| C source code files: |
| |
| rdjpgcom.c Stand-alone rdjpgcom application. |
| wrjpgcom.c Stand-alone wrjpgcom application. |
| |
| These programs do not depend on the IJG library. They do use |
| jconfig.h and jinclude.h, only to improve portability. |
| |
| |
| ADDITIONAL FILES |
| ================ |
| |
| Documentation (see README for a guide to the documentation files): |
| |
| README Master documentation file. |
| *.txt Other documentation files. |
| *.1 Documentation in Unix man page format. |
| change.log Version-to-version change highlights. |
| example.c Sample code for calling JPEG library. |
| |
| Configuration/installation files and programs (see install.txt for more info): |
| |
| configure Unix shell script to perform automatic configuration. |
| configure.ac Source file for use with Autoconf to generate configure. |
| ltmain.sh Support scripts for configure (from GNU libtool). |
| config.guess |
| config.sub |
| depcomp |
| missing |
| install-sh Install shell script for those Unix systems lacking one. |
| Makefile.in Makefile input for configure. |
| Makefile.am Source file for use with Automake to generate Makefile.in. |
| jconfig.txt Template for making jconfig.h by hand. |
| aclocal.m4 M4 macro definitions for use with Autoconf. |
| |
| Test files (see install.txt for test procedure): |
| |
| test*.* Source and comparison files for confidence test. |
| These are binary image files, NOT text files. |