blob: 73dbe530a9a7be207b8a8964c28e4e64ebb854a1 [file] [log] [blame]
/*
* jpegtran.c
*
* Copyright (C) 1995-2010, Thomas G. Lane, Guido Vollbeding.
* Copyright (C) 2010, D. R. Commander.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains a command-line user interface for JPEG transcoding.
* It is very similar to cjpeg.c, and partly to djpeg.c, but provides
* lossless transcoding between different JPEG file formats. It also
* provides some lossless and sort-of-lossless transformations of JPEG data.
*/
#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
#include "transupp.h" /* Support routines for jpegtran */
#include "jversion.h" /* for version message */
#include "config.h"
#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
#ifdef __MWERKS__
#include <SIOUX.h> /* Metrowerks needs this */
#include <console.h> /* ... and this */
#endif
#ifdef THINK_C
#include <console.h> /* Think declares it here */
#endif
#endif
/*
* Argument-parsing code.
* The switch parser is designed to be useful with DOS-style command line
* syntax, ie, intermixed switches and file names, where only the switches
* to the left of a given file name affect processing of that file.
* The main program in this file doesn't actually use this capability...
*/
static const char * progname; /* program name for error messages */
static char * outfilename; /* for -outfile switch */
static JCOPY_OPTION copyoption; /* -copy switch */
static jpeg_transform_info transformoption; /* image transformation options */
LOCAL(void)
usage (void)
/* complain about bad command line */
{
fprintf(stderr, "usage: %s [switches] ", progname);
#ifdef TWO_FILE_COMMANDLINE
fprintf(stderr, "inputfile outputfile\n");
#else
fprintf(stderr, "[inputfile]\n");
#endif
fprintf(stderr, "Switches (names may be abbreviated):\n");
fprintf(stderr, " -copy none Copy no extra markers from source file\n");
fprintf(stderr, " -copy comments Copy only comment markers (default)\n");
fprintf(stderr, " -copy all Copy all extra markers\n");
#ifdef ENTROPY_OPT_SUPPORTED
fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n");
#endif
#ifdef C_PROGRESSIVE_SUPPORTED
fprintf(stderr, " -progressive Create progressive JPEG file\n");
#endif
fprintf(stderr, "Switches for modifying the image:\n");
#if TRANSFORMS_SUPPORTED
fprintf(stderr, " -crop WxH+X+Y Crop to a rectangular subarea\n");
fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n");
fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n");
fprintf(stderr, " -perfect Fail if there is non-transformable edge blocks\n");
fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n");
#endif
#if TRANSFORMS_SUPPORTED
fprintf(stderr, " -transpose Transpose image\n");
fprintf(stderr, " -transverse Transverse transpose image\n");
fprintf(stderr, " -trim Drop non-transformable edge blocks\n");
#endif
fprintf(stderr, "Switches for advanced users:\n");
fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n");
fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n");
fprintf(stderr, " -outfile name Specify name for output file\n");
fprintf(stderr, " -verbose or -debug Emit debug output\n");
fprintf(stderr, "Switches for wizards:\n");
#ifdef C_ARITH_CODING_SUPPORTED
fprintf(stderr, " -arithmetic Use arithmetic coding\n");
#endif
#ifdef C_MULTISCAN_FILES_SUPPORTED
fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n");
#endif
exit(EXIT_FAILURE);
}
LOCAL(void)
select_transform (JXFORM_CODE transform)
/* Silly little routine to detect multiple transform options,
* which we can't handle.
*/
{
#if TRANSFORMS_SUPPORTED
if (transformoption.transform == JXFORM_NONE ||
transformoption.transform == transform) {
transformoption.transform = transform;
} else {
fprintf(stderr, "%s: can only do one image transformation at a time\n",
progname);
usage();
}
#else
fprintf(stderr, "%s: sorry, image transformation was not compiled\n",
progname);
exit(EXIT_FAILURE);
#endif
}
LOCAL(int)
parse_switches (j_compress_ptr cinfo, int argc, char **argv,
int last_file_arg_seen, boolean for_real)
/* Parse optional switches.
* Returns argv[] index of first file-name argument (== argc if none).
* Any file names with indexes <= last_file_arg_seen are ignored;
* they have presumably been processed in a previous iteration.
* (Pass 0 for last_file_arg_seen on the first or only iteration.)
* for_real is FALSE on the first (dummy) pass; we may skip any expensive
* processing.
*/
{
int argn;
char * arg;
boolean simple_progressive;
char * scansarg = NULL; /* saves -scans parm if any */
/* Set up default JPEG parameters. */
simple_progressive = FALSE;
outfilename = NULL;
copyoption = JCOPYOPT_DEFAULT;
transformoption.transform = JXFORM_NONE;
transformoption.perfect = FALSE;
transformoption.trim = FALSE;
transformoption.force_grayscale = FALSE;
transformoption.crop = FALSE;
cinfo->err->trace_level = 0;
/* Scan command line options, adjust parameters */
for (argn = 1; argn < argc; argn++) {
arg = argv[argn];
if (*arg != '-') {
/* Not a switch, must be a file name argument */
if (argn <= last_file_arg_seen) {
outfilename = NULL; /* -outfile applies to just one input file */
continue; /* ignore this name if previously processed */
}
break; /* else done parsing switches */
}
arg++; /* advance past switch marker character */
if (keymatch(arg, "arithmetic", 1)) {
/* Use arithmetic coding. */
#ifdef C_ARITH_CODING_SUPPORTED
cinfo->arith_code = TRUE;
#else
fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
progname);
exit(EXIT_FAILURE);
#endif
} else if (keymatch(arg, "copy", 2)) {
/* Select which extra markers to copy. */
if (++argn >= argc) /* advance to next argument */
usage();
if (keymatch(argv[argn], "none", 1)) {
copyoption = JCOPYOPT_NONE;
} else if (keymatch(argv[argn], "comments", 1)) {
copyoption = JCOPYOPT_COMMENTS;
} else if (keymatch(argv[argn], "all", 1)) {
copyoption = JCOPYOPT_ALL;
} else
usage();
} else if (keymatch(arg, "crop", 2)) {
/* Perform lossless cropping. */
#if TRANSFORMS_SUPPORTED
if (++argn >= argc) /* advance to next argument */
usage();
if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
fprintf(stderr, "%s: bogus -crop argument '%s'\n",
progname, argv[argn]);
exit(EXIT_FAILURE);
}
#else
select_transform(JXFORM_NONE); /* force an error */
#endif
} else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
/* Enable debug printouts. */
/* On first -d, print version identification */
static boolean printed_version = FALSE;
if (! printed_version) {
fprintf(stderr, "%s version %s (build %s)\n",
PACKAGE_NAME, VERSION, BUILD);
fprintf(stderr, "%s\n\n", LJTCOPYRIGHT);
fprintf(stderr, "Based on Independent JPEG Group's libjpeg, version %s\n%s\n\n",
JVERSION, JCOPYRIGHT);
printed_version = TRUE;
}
cinfo->err->trace_level++;
} else if (keymatch(arg, "flip", 1)) {
/* Mirror left-right or top-bottom. */
if (++argn >= argc) /* advance to next argument */
usage();
if (keymatch(argv[argn], "horizontal", 1))
select_transform(JXFORM_FLIP_H);
else if (keymatch(argv[argn], "vertical", 1))
select_transform(JXFORM_FLIP_V);
else
usage();
} else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) {
/* Force to grayscale. */
#if TRANSFORMS_SUPPORTED
transformoption.force_grayscale = TRUE;
#else
select_transform(JXFORM_NONE); /* force an error */
#endif
} else if (keymatch(arg, "maxmemory", 3)) {
/* Maximum memory in Kb (or Mb with 'm'). */
long lval;
char ch = 'x';
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
usage();
if (ch == 'm' || ch == 'M')
lval *= 1000L;
cinfo->mem->max_memory_to_use = lval * 1000L;
} else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
/* Enable entropy parm optimization. */
#ifdef ENTROPY_OPT_SUPPORTED
cinfo->optimize_coding = TRUE;
#else
fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
progname);
exit(EXIT_FAILURE);
#endif
} else if (keymatch(arg, "outfile", 4)) {
/* Set output file name. */
if (++argn >= argc) /* advance to next argument */
usage();
outfilename = argv[argn]; /* save it away for later use */
} else if (keymatch(arg, "perfect", 2)) {
/* Fail if there is any partial edge MCUs that the transform can't
* handle. */
transformoption.perfect = TRUE;
} else if (keymatch(arg, "progressive", 2)) {
/* Select simple progressive mode. */
#ifdef C_PROGRESSIVE_SUPPORTED
simple_progressive = TRUE;
/* We must postpone execution until num_components is known. */
#else
fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
progname);
exit(EXIT_FAILURE);
#endif
} else if (keymatch(arg, "restart", 1)) {
/* Restart interval in MCU rows (or in MCUs with 'b'). */
long lval;
char ch = 'x';
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
usage();
if (lval < 0 || lval > 65535L)
usage();
if (ch == 'b' || ch == 'B') {
cinfo->restart_interval = (unsigned int) lval;
cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
} else {
cinfo->restart_in_rows = (int) lval;
/* restart_interval will be computed during startup */
}
} else if (keymatch(arg, "rotate", 2)) {
/* Rotate 90, 180, or 270 degrees (measured clockwise). */
if (++argn >= argc) /* advance to next argument */
usage();
if (keymatch(argv[argn], "90", 2))
select_transform(JXFORM_ROT_90);
else if (keymatch(argv[argn], "180", 3))
select_transform(JXFORM_ROT_180);
else if (keymatch(argv[argn], "270", 3))
select_transform(JXFORM_ROT_270);
else
usage();
} else if (keymatch(arg, "scans", 1)) {
/* Set scan script. */
#ifdef C_MULTISCAN_FILES_SUPPORTED
if (++argn >= argc) /* advance to next argument */
usage();
scansarg = argv[argn];
/* We must postpone reading the file in case -progressive appears. */
#else
fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
progname);
exit(EXIT_FAILURE);
#endif
} else if (keymatch(arg, "transpose", 1)) {
/* Transpose (across UL-to-LR axis). */
select_transform(JXFORM_TRANSPOSE);
} else if (keymatch(arg, "transverse", 6)) {
/* Transverse transpose (across UR-to-LL axis). */
select_transform(JXFORM_TRANSVERSE);
} else if (keymatch(arg, "trim", 3)) {
/* Trim off any partial edge MCUs that the transform can't handle. */
transformoption.trim = TRUE;
} else {
usage(); /* bogus switch */
}
}
/* Post-switch-scanning cleanup */
if (for_real) {
#ifdef C_PROGRESSIVE_SUPPORTED
if (simple_progressive) /* process -progressive; -scans can override */
jpeg_simple_progression(cinfo);
#endif
#ifdef C_MULTISCAN_FILES_SUPPORTED
if (scansarg != NULL) /* process -scans if it was present */
if (! read_scan_script(cinfo, scansarg))
usage();
#endif
}
return argn; /* return index of next arg (file name) */
}
/*
* The main program.
*/
int
main (int argc, char **argv)
{
struct jpeg_decompress_struct srcinfo;
struct jpeg_compress_struct dstinfo;
struct jpeg_error_mgr jsrcerr, jdsterr;
#ifdef PROGRESS_REPORT
struct cdjpeg_progress_mgr progress;
#endif
jvirt_barray_ptr * src_coef_arrays;
jvirt_barray_ptr * dst_coef_arrays;
int file_index;
/* We assume all-in-memory processing and can therefore use only a
* single file pointer for sequential input and output operation.
*/
FILE * fp;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
argc = ccommand(&argv);
#endif
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "jpegtran"; /* in case C library doesn't provide it */
/* Initialize the JPEG decompression object with default error handling. */
srcinfo.err = jpeg_std_error(&jsrcerr);
jpeg_create_decompress(&srcinfo);
/* Initialize the JPEG compression object with default error handling. */
dstinfo.err = jpeg_std_error(&jdsterr);
jpeg_create_compress(&dstinfo);
/* Now safe to enable signal catcher.
* Note: we assume only the decompression object will have virtual arrays.
*/
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &srcinfo);
#endif
/* Scan command line to find file names.
* It is convenient to use just one switch-parsing routine, but the switch
* values read here are mostly ignored; we will rescan the switches after
* opening the input file. Also note that most of the switches affect the
* destination JPEG object, so we parse into that and then copy over what
* needs to affects the source too.
*/
file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
jsrcerr.trace_level = jdsterr.trace_level;
srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
#ifdef TWO_FILE_COMMANDLINE
/* Must have either -outfile switch or explicit output file name */
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
usage();
}
}
#else
/* Unix style: expect zero or one file name */
if (file_index < argc-1) {
fprintf(stderr, "%s: only one input file\n", progname);
usage();
}
#endif /* TWO_FILE_COMMANDLINE */
/* Open the input file. */
if (file_index < argc) {
if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
fp = read_stdin();
}
#ifdef PROGRESS_REPORT
start_progress_monitor((j_common_ptr) &dstinfo, &progress);
#endif
/* Specify data source for decompression */
jpeg_stdio_src(&srcinfo, fp);
/* Enable saving of extra markers that we want to copy */
jcopy_markers_setup(&srcinfo, copyoption);
/* Read file header */
(void) jpeg_read_header(&srcinfo, TRUE);
/* Any space needed by a transform option must be requested before
* jpeg_read_coefficients so that memory allocation will be done right.
*/
#if TRANSFORMS_SUPPORTED
/* Fail right away if -perfect is given and transformation is not perfect.
*/
if (!jtransform_request_workspace(&srcinfo, &transformoption)) {
fprintf(stderr, "%s: transformation is not perfect\n", progname);
exit(EXIT_FAILURE);
}
#endif
/* Read source file as DCT coefficients */
src_coef_arrays = jpeg_read_coefficients(&srcinfo);
/* Initialize destination compression parameters from source values */
jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
/* Adjust destination parameters if required by transform options;
* also find out which set of coefficient arrays will hold the output.
*/
#if TRANSFORMS_SUPPORTED
dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#else
dst_coef_arrays = src_coef_arrays;
#endif
/* Close input file, if we opened it.
* Note: we assume that jpeg_read_coefficients consumed all input
* until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
* only consume more while (! cinfo->inputctl->eoi_reached).
* We cannot call jpeg_finish_decompress here since we still need the
* virtual arrays allocated from the source object for processing.
*/
if (fp != stdin)
fclose(fp);
/* Open the output file. */
if (outfilename != NULL) {
if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename);
exit(EXIT_FAILURE);
}
} else {
/* default output file is stdout */
fp = write_stdout();
}
/* Adjust default compression parameters by re-parsing the options */
file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
/* Specify data destination for compression */
jpeg_stdio_dest(&dstinfo, fp);
/* Start compressor (note no image data is actually written here) */
jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
/* Copy to the output file any extra markers that we want to preserve */
jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
/* Execute image transformation, if any */
#if TRANSFORMS_SUPPORTED
jtransform_execute_transformation(&srcinfo, &dstinfo,
src_coef_arrays,
&transformoption);
#endif
/* Finish compression and release memory */
jpeg_finish_compress(&dstinfo);
jpeg_destroy_compress(&dstinfo);
(void) jpeg_finish_decompress(&srcinfo);
jpeg_destroy_decompress(&srcinfo);
/* Close output file, if we opened it */
if (fp != stdout)
fclose(fp);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &dstinfo);
#endif
/* All done. */
exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
}