INSTALL

INSTALLATION OVERVIEW
=====================

Once libmtp is built and installed, you will have the following files
($PREFIX is the --prefix option given to the "configure" script and
defaults to /usr/local/):

   $PREFIX/lib/libmtp.a               Static C library
   $PREFIX/lib/libmtp.so.x.y.z        Dynamic C library
   $PREFIX/lib/libmtp.so.x            A link to the library
   $PREFIX/lib/libmtp.so              A link to the library
   $PREFIX/include/libmtp.h           C header file for libmtp API
   $PREFIX/lib/pkgconfig/libmtp.pc    pkg-config configuration file

Sample programs will be built in the "example" directory, and should
help you get used to using the libmtp API, as well as provide some
immediate gratification. Links to other programs using the libmtp
API may be found at the homepage: http://libmtp.sourceforge.net/


Install From Distribution
-------------------------

You should probably prefer to install libmtp from the distribution
source you're using. Last time we checked, libmtp was part of Ubuntu,
Fedora, OpenSUSE, Debian testing, Gentoo, FreeBSD ports and OpenBSD
packages/ports.


Dependencies
------------

To build libmtp you should only need development files for libusb.
(Often named libusb-devel or similar.) For working with CVS versions
you may need autoconf, automake, libtool, gettext(-devel).

To enable the optional MTPZ support using libgcrypt you need the
libgcrypt library installed as well.


Shared Library Support
----------------------

Shared library linking is supported. You will need to 'make install'
the library before you can execute the sample binaries, and add the
libmtp install directory to your shared library search path.

On Linux, you would add the line "/usr/local/lib" to your
"/etc/ld.so.conf" or as a oneliner in for example a
"/etc/ld.so.conf.d/local.conf" file and run the
program "ldconfig" to scan in the shared libraries at
the new path. This is a part of the Linux shared library
loader actually.

To access the library from real odd locations you can use
the LD_LIBRARY_PATH environment variable by setting it before
you run your program, for example:

  % export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
  % my_program

This way of enabling the library to link is a workaround hack.
Note that the LD_LIBRARY_PATH is actually supposed to be used for
testing, not production systems or distributions. It is commonly
used as a workaround when a user is installing libraries in her/his
home directory however. Read more about this environment variable
here: http://www.visi.com/~barr/ldpath.html

The shared library comes with different interface version numbers,
for example libmtp.so.4, libmtp.so.5 and so forth. This is used so
that both old and new libmtp libraries shall be able to coexist on
the same system. When you compile your programs they will typically
bind to the latest version of the shared library. A link to the
latest version is always provided as $PREFIX/lib/libmtp.so.

libusb Support
--------------

This package depends on libusb.  Get libusb from sourceforge at:

   http://www.sourceforge.net/projects/libusb/

On Linux, please use the very latest version you can get, between
0.1.8 and 0.1.12 a lot of things happened which pertains to
the udev hotplugging support, see below.


BASIC BUILD PROCEDURE
=====================

To build the package:

   % ./configure
   % make
   % make install

By default, libmtp will add the program-prefix "mtp-" to all the
example programs prior to installation. The program-prefix option
makes libmtp sample programs avoid collision with other programs like
sox' "play" program. If the default prefix for some reason fail,
try to tag on "--program-prefix=mtp-" to the "configure" command.

The "libexedir" in the configure file is hardcoded to /lib/udev to
make the mtp-probe (which is built for Linux only) install into
that directory. This is the only location that makes sens for this
executable.

if you want to install the documentation type:

   % make install-docs

if you checked out the sources from CVS, you must first run the
autogen.sh script that generates all the GNU autotools files.
Notice that this requires GNU autoconf, automake and libtool and
possibly some other packages like gettext, readline, intltool and
other M4 macro sources. This is done with:

   % ./autogen.sh


Linux hotplugging
-----------------

After compilation and installation you may (and should) add hotplugging
support by running the hotplug script, if your distribution supports
hotplugging (all do). This typically means you have something
in /etc/hotplug and that hotplugging is started when you boot your
machine in a script named /etc/init.d/hotplug or similar.

Activate hotplugging by running:

   %./hotplug.sh

Hotplug will (typically) use the device map file installed by hotplug.sh
at /etc/hotplug/usb/libmtp.usermap to lift the device to userspace for the
current user by running the script /etc/hotplug/usb/libmtp.sh. If
you have the program "resmgr" installed (currently used only by SuSE to
our knowledge) that program will be used for enabling desktop user
access, otherwise the current user of the desktop will be determined
from files in /var/run. (See the script "libmtp.sh" for details.)


Linux udev hotplugging
----------------------

Newer Linux distributions have dropped support for the old hotplug system
and rely solely on udev, and rules stored below /etc/udev/rules.d to
handle permissions and actions on device connections. It's quite solid
but the whole thing is rather shaky when it comes to such things as
custom devices handled solely by libusb, which is what libmtp and for
example SANE backends use.

The libmtp.rules file that comes with libmtp can be used as a starter.

This will set the environment variables ID_MEDIA_PLAYER and
ID_MTP_DEVICE to "1" and the former one will be recognized by the
scripts distributed by recent versions of udev to be a
console-writable device that should be accessible for all
users.

Ancient udev, HAL, libusb
-------------------------

The old script for udev used to set the device access to "666"
which is rather nasty (not that big security issue, unless you
think someone will break into your jukebox) some systems used
to let PAM do this by placing a configuration file in
/etc/security/ somewhere. Then it was replaced with simple
udev rules.

At one point HAL was used to take devices detected by udev and
signal to userspace that they were available and provide some
information about them. This was unnecessary middleware, it has
been killed and most userspace applications now get their
information directly from udev instead.

In old libusb first you need a crazy rule that creates a device
node in the /dev/bus/usb hierarchy whenever any USB device is
connected. The script has this at the top, you can comment it
in if your distribution does not already create these device
nodes.

Then libusb may need to be patched to recognize this hierarchy.
The 0.1.12 version is the first which is properly fixed.



If you cannot run hotplugging
-----------------------------

If you have a distro without hotplugging enabled try this as root:

  % chmod -R a+w /proc/bus/usb

You have to do this again every time you unplug/replug your USB cable
or restart the jukebox, every time you quit libnjb and restart it,
etc etc etc an alternative is to run libmtp as root which works just fine.
The problem is to somehow assure that you (ie the current user) always
has write access on  /proc/bus/usb/*

You can find the Linux hotplug project at:
http://linux-hotplug.sourceforge.net/


Compilation for embedded devices
--------------------------------

Problems with Autoconf complaining about a missing malloc() function
during cross-compilation can be solved with this hack if you're using
glibc:

  % export ac_cv_func_malloc_0_nonnull=yes
  % ./configure

If you're using uclibc you may have to smack in a custom rpl_malloc()
function in your program, see the Autoconf texinfo documentation.

See further:
http://wiki.buici.com/wiki/Autoconf_and_RPL_MALLOC

Compilation for Solaris/SunOS
-----------------------------

libmtp builds on Solaris/SunOS with either gcc or SunStudio 12. It does
require GNU Make (aka gmake) to be installed. Building libmtp on Solaris
10 and Solaris 11 differ slightly, so alternate instructions are provided
for each Solaris version.

For Solaris 10
--------------

To build using GCC:

  % CFLAGS="I/usr/sfw/lib -L/usr/sfw/lib -R/usr/sfw/lib" MAKE=gmake \
    INSTALL=/usr/ucb/install ./configure
  % gmake
  % gmake install

Custom CLFAGS are required for libusb.so as it lives in /usr/sfw/lib,
and this path is not in the default search path for ld. If these
CFLAGS are not set, several components of ./configure will fail leading
to a failed build.

To build using SunStudio 12:

  % CFLAGS="I/usr/sfw/lib -L/usr/sfw/lib -R/usr/sfw/lib" MAKE=gmake \
    INSTALL=/usr/ucb/install CC=cc ./configure
  % gmake
  % gmake install


General Notes:
All MTP devices on Solaris 10u2+ are driven by the usb_mid driver, which
will automatically export ugen device interfaces with the correct device
permissions. No special configuration is required. See the usb_mid(7D)
and ugen(7D) manpages and /usr/sfw/share/doc/libusb/libusb.txt for
more information.

For Solaris 11
--------------

Building libmtp on Solaris 11 is very similar to those instructions for
Solaris 10, however libusb now lives in /usr/lib, and openusb is also
available as an alternative USB library. Oracle does not provide a
libusb v1.0 API compatible version of libusb, instead providing the older
v0.1 API interface version of libusb. As mentioned, Oracle also provides
the OpenUSB USB library as an alternate to libusb v1.0, however OpenUSB is
not source or binary compatible with libusb.

Before building/installing libmtp there are some components missing from
the base Solaris 11 installation, and are required to be installed prior
to building/installing libmtp. The 'libusbugen' package must be installed
before libusb itself is usable on Solaris 11, alternatively the 'openusb'
package may be used.

To build using GCC:
  % ./configure
  % gmake
  % sudo gmake install

To build using SunStudio 12:
  % CC=cc ./configure
  % gmake
  % sudo gmake install


General Notes:
All MTP devices on Solaris 11+ are driven by the usb_mid driver, which
will automatically export ugen device interfaces with the correct device
permissions. No special configuration is required. See the usb_mid(7D)
and ugen(7D) manpages and /usr/share/doc/libusb/libusb.txt for more
information.