| /* Copyright (c) 2007-2008 CSIRO |
| Copyright (c) 2007-2009 Xiph.Org Foundation |
| Copyright (c) 2008-2009 Gregory Maxwell |
| Written by Jean-Marc Valin and Gregory Maxwell */ |
| /* |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| - Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| - Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| |
| - Neither the name of the Xiph.org Foundation nor the names of its |
| contributors may be used to endorse or promote products derived from |
| this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR |
| CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #include <math.h> |
| #include "bands.h" |
| #include "modes.h" |
| #include "vq.h" |
| #include "cwrs.h" |
| #include "stack_alloc.h" |
| #include "os_support.h" |
| #include "mathops.h" |
| #include "rate.h" |
| |
| /* This is a cos() approximation designed to be bit-exact on any platform. Bit exactness |
| with this approximation is important because it has an impact on the bit allocation */ |
| static celt_int16 bitexact_cos(celt_int16 x) |
| { |
| celt_int32 tmp; |
| celt_int16 x2; |
| tmp = (4096+((celt_int32)(x)*(x)))>>13; |
| if (tmp > 32767) |
| tmp = 32767; |
| x2 = tmp; |
| x2 = (32767-x2) + FRAC_MUL16(x2, (-7651 + FRAC_MUL16(x2, (8277 + FRAC_MUL16(-626, x2))))); |
| if (x2 > 32766) |
| x2 = 32766; |
| return 1+x2; |
| } |
| |
| |
| #ifdef FIXED_POINT |
| /* Compute the amplitude (sqrt energy) in each of the bands */ |
| void compute_band_energies(const CELTMode *m, const celt_sig *X, celt_ener *bank, int end, int _C, int M) |
| { |
| int i, c, N; |
| const celt_int16 *eBands = m->eBands; |
| const int C = CHANNELS(_C); |
| N = M*m->shortMdctSize; |
| for (c=0;c<C;c++) |
| { |
| for (i=0;i<end;i++) |
| { |
| int j; |
| celt_word32 maxval=0; |
| celt_word32 sum = 0; |
| |
| j=M*eBands[i]; do { |
| maxval = MAX32(maxval, X[j+c*N]); |
| maxval = MAX32(maxval, -X[j+c*N]); |
| } while (++j<M*eBands[i+1]); |
| |
| if (maxval > 0) |
| { |
| int shift = celt_ilog2(maxval)-10; |
| j=M*eBands[i]; do { |
| sum = MAC16_16(sum, EXTRACT16(VSHR32(X[j+c*N],shift)), |
| EXTRACT16(VSHR32(X[j+c*N],shift))); |
| } while (++j<M*eBands[i+1]); |
| /* We're adding one here to make damn sure we never end up with a pitch vector that's |
| larger than unity norm */ |
| bank[i+c*m->nbEBands] = EPSILON+VSHR32(EXTEND32(celt_sqrt(sum)),-shift); |
| } else { |
| bank[i+c*m->nbEBands] = EPSILON; |
| } |
| /*printf ("%f ", bank[i+c*m->nbEBands]);*/ |
| } |
| } |
| /*printf ("\n");*/ |
| } |
| |
| /* Normalise each band such that the energy is one. */ |
| void normalise_bands(const CELTMode *m, const celt_sig * restrict freq, celt_norm * restrict X, const celt_ener *bank, int end, int _C, int M) |
| { |
| int i, c, N; |
| const celt_int16 *eBands = m->eBands; |
| const int C = CHANNELS(_C); |
| N = M*m->shortMdctSize; |
| for (c=0;c<C;c++) |
| { |
| i=0; do { |
| celt_word16 g; |
| int j,shift; |
| celt_word16 E; |
| shift = celt_zlog2(bank[i+c*m->nbEBands])-13; |
| E = VSHR32(bank[i+c*m->nbEBands], shift); |
| g = EXTRACT16(celt_rcp(SHL32(E,3))); |
| j=M*eBands[i]; do { |
| X[j+c*N] = MULT16_16_Q15(VSHR32(freq[j+c*N],shift-1),g); |
| } while (++j<M*eBands[i+1]); |
| } while (++i<end); |
| } |
| } |
| |
| #else /* FIXED_POINT */ |
| /* Compute the amplitude (sqrt energy) in each of the bands */ |
| void compute_band_energies(const CELTMode *m, const celt_sig *X, celt_ener *bank, int end, int _C, int M) |
| { |
| int i, c, N; |
| const celt_int16 *eBands = m->eBands; |
| const int C = CHANNELS(_C); |
| N = M*m->shortMdctSize; |
| for (c=0;c<C;c++) |
| { |
| for (i=0;i<end;i++) |
| { |
| int j; |
| celt_word32 sum = 1e-10f; |
| for (j=M*eBands[i];j<M*eBands[i+1];j++) |
| sum += X[j+c*N]*X[j+c*N]; |
| bank[i+c*m->nbEBands] = celt_sqrt(sum); |
| /*printf ("%f ", bank[i+c*m->nbEBands]);*/ |
| } |
| } |
| /*printf ("\n");*/ |
| } |
| |
| /* Normalise each band such that the energy is one. */ |
| void normalise_bands(const CELTMode *m, const celt_sig * restrict freq, celt_norm * restrict X, const celt_ener *bank, int end, int _C, int M) |
| { |
| int i, c, N; |
| const celt_int16 *eBands = m->eBands; |
| const int C = CHANNELS(_C); |
| N = M*m->shortMdctSize; |
| for (c=0;c<C;c++) |
| { |
| for (i=0;i<end;i++) |
| { |
| int j; |
| celt_word16 g = 1.f/(1e-10f+bank[i+c*m->nbEBands]); |
| for (j=M*eBands[i];j<M*eBands[i+1];j++) |
| X[j+c*N] = freq[j+c*N]*g; |
| } |
| } |
| } |
| |
| #endif /* FIXED_POINT */ |
| |
| void renormalise_bands(const CELTMode *m, celt_norm * restrict X, int end, int _C, int M) |
| { |
| int i, c; |
| const celt_int16 *eBands = m->eBands; |
| const int C = CHANNELS(_C); |
| for (c=0;c<C;c++) |
| { |
| i=0; do { |
| renormalise_vector(X+M*eBands[i]+c*M*m->shortMdctSize, Q15ONE, M*eBands[i+1]-M*eBands[i], 1); |
| } while (++i<end); |
| } |
| } |
| |
| /* De-normalise the energy to produce the synthesis from the unit-energy bands */ |
| void denormalise_bands(const CELTMode *m, const celt_norm * restrict X, celt_sig * restrict freq, const celt_ener *bank, int end, int _C, int M) |
| { |
| int i, c, N; |
| const celt_int16 *eBands = m->eBands; |
| const int C = CHANNELS(_C); |
| N = M*m->shortMdctSize; |
| celt_assert2(C<=2, "denormalise_bands() not implemented for >2 channels"); |
| for (c=0;c<C;c++) |
| { |
| celt_sig * restrict f; |
| const celt_norm * restrict x; |
| f = freq+c*N; |
| x = X+c*N; |
| for (i=0;i<end;i++) |
| { |
| int j, band_end; |
| celt_word32 g = SHR32(bank[i+c*m->nbEBands],1); |
| j=M*eBands[i]; |
| band_end = M*eBands[i+1]; |
| do { |
| *f++ = SHL32(MULT16_32_Q15(*x, g),2); |
| x++; |
| } while (++j<band_end); |
| } |
| for (i=M*eBands[m->nbEBands];i<N;i++) |
| *f++ = 0; |
| } |
| } |
| |
| static void stereo_band_mix(const CELTMode *m, celt_norm *X, celt_norm *Y, const celt_ener *bank, int stereo_mode, int bandID, int dir, int N) |
| { |
| int i = bandID; |
| int j; |
| celt_word16 a1, a2; |
| if (stereo_mode==0) |
| { |
| /* Do mid-side when not doing intensity stereo */ |
| a1 = QCONST16(.70711f,14); |
| a2 = dir*QCONST16(.70711f,14); |
| } else { |
| celt_word16 left, right; |
| celt_word16 norm; |
| #ifdef FIXED_POINT |
| int shift = celt_zlog2(MAX32(bank[i], bank[i+m->nbEBands]))-13; |
| #endif |
| left = VSHR32(bank[i],shift); |
| right = VSHR32(bank[i+m->nbEBands],shift); |
| norm = EPSILON + celt_sqrt(EPSILON+MULT16_16(left,left)+MULT16_16(right,right)); |
| a1 = DIV32_16(SHL32(EXTEND32(left),14),norm); |
| a2 = dir*DIV32_16(SHL32(EXTEND32(right),14),norm); |
| } |
| for (j=0;j<N;j++) |
| { |
| celt_norm r, l; |
| l = X[j]; |
| r = Y[j]; |
| X[j] = MULT16_16_Q14(a1,l) + MULT16_16_Q14(a2,r); |
| Y[j] = MULT16_16_Q14(a1,r) - MULT16_16_Q14(a2,l); |
| } |
| } |
| |
| /* Decide whether we should spread the pulses in the current frame */ |
| int folding_decision(const CELTMode *m, celt_norm *X, celt_word16 *average, int *last_decision, int end, int _C, int M) |
| { |
| int i, c, N0; |
| int NR=0; |
| celt_word32 ratio = EPSILON; |
| const int C = CHANNELS(_C); |
| const celt_int16 * restrict eBands = m->eBands; |
| |
| N0 = M*m->shortMdctSize; |
| |
| for (c=0;c<C;c++) |
| { |
| for (i=0;i<end;i++) |
| { |
| int j, N; |
| int max_i=0; |
| celt_word16 max_val=EPSILON; |
| celt_word32 floor_ener=EPSILON; |
| celt_norm * restrict x = X+M*eBands[i]+c*N0; |
| N = M*eBands[i+1]-M*eBands[i]; |
| for (j=0;j<N;j++) |
| { |
| if (ABS16(x[j])>max_val) |
| { |
| max_val = ABS16(x[j]); |
| max_i = j; |
| } |
| } |
| #if 0 |
| for (j=0;j<N;j++) |
| { |
| if (abs(j-max_i)>2) |
| floor_ener += x[j]*x[j]; |
| } |
| #else |
| floor_ener = QCONST32(1.f,28)-MULT16_16(max_val,max_val); |
| if (max_i < N-1) |
| floor_ener -= MULT16_16(x[(max_i+1)], x[(max_i+1)]); |
| if (max_i < N-2) |
| floor_ener -= MULT16_16(x[(max_i+2)], x[(max_i+2)]); |
| if (max_i > 0) |
| floor_ener -= MULT16_16(x[(max_i-1)], x[(max_i-1)]); |
| if (max_i > 1) |
| floor_ener -= MULT16_16(x[(max_i-2)], x[(max_i-2)]); |
| floor_ener = MAX32(floor_ener, EPSILON); |
| #endif |
| if (N>7) |
| { |
| celt_word16 r; |
| celt_word16 den = celt_sqrt(floor_ener); |
| den = MAX32(QCONST16(.02f, 15), den); |
| r = DIV32_16(SHL32(EXTEND32(max_val),8),den); |
| ratio = ADD32(ratio, EXTEND32(r)); |
| NR++; |
| } |
| } |
| } |
| if (NR>0) |
| ratio = DIV32_16(ratio, NR); |
| ratio = ADD32(HALF32(ratio), HALF32(*average)); |
| if (!*last_decision) |
| { |
| *last_decision = (ratio < QCONST16(1.8f,8)); |
| } else { |
| *last_decision = (ratio < QCONST16(3.f,8)); |
| } |
| *average = EXTRACT16(ratio); |
| return *last_decision; |
| } |
| |
| #ifdef MEASURE_NORM_MSE |
| |
| float MSE[30] = {0}; |
| int nbMSEBands = 0; |
| int MSECount[30] = {0}; |
| |
| void dump_norm_mse(void) |
| { |
| int i; |
| for (i=0;i<nbMSEBands;i++) |
| { |
| printf ("%g ", MSE[i]/MSECount[i]); |
| } |
| printf ("\n"); |
| } |
| |
| void measure_norm_mse(const CELTMode *m, float *X, float *X0, float *bandE, float *bandE0, int M, int N, int C) |
| { |
| static int init = 0; |
| int i; |
| if (!init) |
| { |
| atexit(dump_norm_mse); |
| init = 1; |
| } |
| for (i=0;i<m->nbEBands;i++) |
| { |
| int j; |
| int c; |
| float g; |
| if (bandE0[i]<10 || (C==2 && bandE0[i+m->nbEBands]<1)) |
| continue; |
| for (c=0;c<C;c++) |
| { |
| g = bandE[i+c*m->nbEBands]/(1e-15+bandE0[i+c*m->nbEBands]); |
| for (j=M*m->eBands[i];j<M*m->eBands[i+1];j++) |
| MSE[i] += (g*X[j+c*N]-X0[j+c*N])*(g*X[j+c*N]-X0[j+c*N]); |
| } |
| MSECount[i]+=C; |
| } |
| nbMSEBands = m->nbEBands; |
| } |
| |
| #endif |
| |
| static void interleave_vector(celt_norm *X, int N0, int stride) |
| { |
| int i,j; |
| VARDECL(celt_norm, tmp); |
| int N; |
| SAVE_STACK; |
| N = N0*stride; |
| ALLOC(tmp, N, celt_norm); |
| for (i=0;i<stride;i++) |
| for (j=0;j<N0;j++) |
| tmp[j*stride+i] = X[i*N0+j]; |
| for (j=0;j<N;j++) |
| X[j] = tmp[j]; |
| RESTORE_STACK; |
| } |
| |
| static void deinterleave_vector(celt_norm *X, int N0, int stride) |
| { |
| int i,j; |
| VARDECL(celt_norm, tmp); |
| int N; |
| SAVE_STACK; |
| N = N0*stride; |
| ALLOC(tmp, N, celt_norm); |
| for (i=0;i<stride;i++) |
| for (j=0;j<N0;j++) |
| tmp[i*N0+j] = X[j*stride+i]; |
| for (j=0;j<N;j++) |
| X[j] = tmp[j]; |
| RESTORE_STACK; |
| } |
| |
| static void haar1(celt_norm *X, int N0, int stride) |
| { |
| int i, j; |
| N0 >>= 1; |
| for (i=0;i<stride;i++) |
| for (j=0;j<N0;j++) |
| { |
| celt_norm tmp = X[stride*2*j+i]; |
| X[stride*2*j+i] = MULT16_16_Q15(QCONST16(.7070678f,15), X[stride*2*j+i] + X[stride*(2*j+1)+i]); |
| X[stride*(2*j+1)+i] = MULT16_16_Q15(QCONST16(.7070678f,15), tmp - X[stride*(2*j+1)+i]); |
| } |
| } |
| |
| static int compute_qn(int N, int b, int offset, int stereo) |
| { |
| static const celt_int16 exp2_table8[8] = |
| {16384, 17866, 19483, 21247, 23170, 25267, 27554, 30048}; |
| int qn, qb; |
| int N2 = 2*N-1; |
| if (stereo && N==2) |
| N2--; |
| qb = (b+N2*offset)/N2; |
| if (qb > (b>>1)-(1<<BITRES)) |
| qb = (b>>1)-(1<<BITRES); |
| |
| if (qb<0) |
| qb = 0; |
| if (qb>14<<BITRES) |
| qb = 14<<BITRES; |
| |
| if (qb<(1<<BITRES>>1)) { |
| qn = 1; |
| } else { |
| qn = exp2_table8[qb&0x7]>>(14-(qb>>BITRES)); |
| qn = (qn+1)>>1<<1; |
| if (qn>1024) |
| qn = 1024; |
| } |
| return qn; |
| } |
| |
| |
| /* This function is responsible for encoding and decoding a band for both |
| the mono and stereo case. Even in the mono case, it can split the band |
| in two and transmit the energy difference with the two half-bands. It |
| can be called recursively so bands can end up being split in 8 parts. */ |
| static void quant_band(int encode, const CELTMode *m, int i, celt_norm *X, celt_norm *Y, |
| int N, int b, int spread, int B, int tf_change, celt_norm *lowband, int resynth, void *ec, |
| celt_int32 *remaining_bits, int LM, celt_norm *lowband_out, const celt_ener *bandE, int level, celt_int32 *seed) |
| { |
| int q; |
| int curr_bits; |
| int stereo, split; |
| int imid=0, iside=0; |
| int N0=N; |
| int N_B=N; |
| int N_B0; |
| int B0=B; |
| int time_divide=0; |
| int recombine=0; |
| |
| N_B /= B; |
| N_B0 = N_B; |
| |
| split = stereo = Y != NULL; |
| |
| /* Special case for one sample */ |
| if (N==1) |
| { |
| int c; |
| celt_norm *x = X; |
| for (c=0;c<1+stereo;c++) |
| { |
| int sign=0; |
| if (b>=1<<BITRES && *remaining_bits>=1<<BITRES) |
| { |
| if (encode) |
| { |
| sign = x[0]<0; |
| ec_enc_bits((ec_enc*)ec, sign, 1); |
| } else { |
| sign = ec_dec_bits((ec_dec*)ec, 1); |
| } |
| *remaining_bits -= 1<<BITRES; |
| b-=1<<BITRES; |
| } |
| if (resynth) |
| x[0] = sign ? -NORM_SCALING : NORM_SCALING; |
| x = Y; |
| } |
| if (lowband_out) |
| lowband_out[0] = X[0]; |
| return; |
| } |
| |
| /* Band recombining to increase frequency resolution */ |
| if (!stereo && B > 1 && level == 0 && tf_change>0) |
| { |
| while (B>1 && tf_change>0) |
| { |
| B>>=1; |
| N_B<<=1; |
| if (encode) |
| haar1(X, N_B, B); |
| if (lowband) |
| haar1(lowband, N_B, B); |
| recombine++; |
| tf_change--; |
| } |
| B0=B; |
| N_B0 = N_B; |
| } |
| |
| /* Increasing the time resolution */ |
| if (!stereo && level==0) |
| { |
| while ((N_B&1) == 0 && tf_change<0 && B <= (1<<LM)) |
| { |
| if (encode) |
| haar1(X, N_B, B); |
| if (lowband) |
| haar1(lowband, N_B, B); |
| B <<= 1; |
| N_B >>= 1; |
| time_divide++; |
| tf_change++; |
| } |
| B0 = B; |
| N_B0 = N_B; |
| } |
| |
| /* Reorganize the samples in time order instead of frequency order */ |
| if (!stereo && B0>1 && level==0) |
| { |
| if (encode) |
| deinterleave_vector(X, N_B, B0); |
| if (lowband) |
| deinterleave_vector(lowband, N_B, B0); |
| } |
| |
| /* If we need more than 32 bits, try splitting the band in two. */ |
| if (!stereo && LM != -1 && b > 32<<BITRES && N>2) |
| { |
| if (LM>0 || (N&1)==0) |
| { |
| N >>= 1; |
| Y = X+N; |
| split = 1; |
| LM -= 1; |
| B = (B+1)>>1; |
| } |
| } |
| |
| if (split) |
| { |
| int qn; |
| int itheta=0; |
| int mbits, sbits, delta; |
| int qalloc; |
| celt_word16 mid, side; |
| int offset; |
| |
| /* Decide on the resolution to give to the split parameter theta */ |
| offset = ((m->logN[i]+(LM<<BITRES))>>1) - (stereo ? QTHETA_OFFSET_STEREO : QTHETA_OFFSET); |
| qn = compute_qn(N, b, offset, stereo); |
| |
| qalloc = 0; |
| if (qn!=1) |
| { |
| if (encode) |
| { |
| if (stereo) |
| stereo_band_mix(m, X, Y, bandE, 0, i, 1, N); |
| |
| mid = renormalise_vector(X, Q15ONE, N, 1); |
| side = renormalise_vector(Y, Q15ONE, N, 1); |
| |
| /* theta is the atan() of the ratio between the (normalized) |
| side and mid. With just that parameter, we can re-scale both |
| mid and side because we know that 1) they have unit norm and |
| 2) they are orthogonal. */ |
| #ifdef FIXED_POINT |
| /* 0.63662 = 2/pi */ |
| itheta = MULT16_16_Q15(QCONST16(0.63662f,15),celt_atan2p(side, mid)); |
| #else |
| itheta = (int)floor(.5f+16384*0.63662f*atan2(side,mid)); |
| #endif |
| |
| itheta = (itheta*qn+8192)>>14; |
| } |
| |
| /* Entropy coding of the angle. We use a uniform pdf for the |
| first stereo split but a triangular one for the rest. */ |
| if (stereo || qn>256 || B>1) |
| { |
| if (encode) |
| ec_enc_uint((ec_enc*)ec, itheta, qn+1); |
| else |
| itheta = ec_dec_uint((ec_dec*)ec, qn+1); |
| qalloc = log2_frac(qn+1,BITRES); |
| } else { |
| int fs=1, ft; |
| ft = ((qn>>1)+1)*((qn>>1)+1); |
| if (encode) |
| { |
| int fl; |
| |
| fs = itheta <= (qn>>1) ? itheta + 1 : qn + 1 - itheta; |
| fl = itheta <= (qn>>1) ? itheta*(itheta + 1)>>1 : |
| ft - ((qn + 1 - itheta)*(qn + 2 - itheta)>>1); |
| |
| ec_encode((ec_enc*)ec, fl, fl+fs, ft); |
| } else { |
| int fl=0; |
| int fm; |
| fm = ec_decode((ec_dec*)ec, ft); |
| |
| if (fm < ((qn>>1)*((qn>>1) + 1)>>1)) |
| { |
| itheta = (isqrt32(8*(celt_uint32)fm + 1) - 1)>>1; |
| fs = itheta + 1; |
| fl = itheta*(itheta + 1)>>1; |
| } |
| else |
| { |
| itheta = (2*(qn + 1) |
| - isqrt32(8*(celt_uint32)(ft - fm - 1) + 1))>>1; |
| fs = qn + 1 - itheta; |
| fl = ft - ((qn + 1 - itheta)*(qn + 2 - itheta)>>1); |
| } |
| |
| ec_dec_update((ec_dec*)ec, fl, fl+fs, ft); |
| } |
| qalloc = log2_frac(ft,BITRES) - log2_frac(fs,BITRES) + 1; |
| } |
| itheta = itheta*16384/qn; |
| } else { |
| if (stereo && encode) |
| stereo_band_mix(m, X, Y, bandE, 1, i, 1, N); |
| } |
| |
| if (itheta == 0) |
| { |
| imid = 32767; |
| iside = 0; |
| delta = -10000; |
| } else if (itheta == 16384) |
| { |
| imid = 0; |
| iside = 32767; |
| delta = 10000; |
| } else { |
| imid = bitexact_cos(itheta); |
| iside = bitexact_cos(16384-itheta); |
| /* This is the mid vs side allocation that minimizes squared error |
| in that band. */ |
| delta = (N-1)*(log2_frac(iside,BITRES+2)-log2_frac(imid,BITRES+2))>>2; |
| } |
| |
| /* This is a special case for N=2 that only works for stereo and takes |
| advantage of the fact that mid and side are orthogonal to encode |
| the side with just one bit. */ |
| if (N==2 && stereo) |
| { |
| int c; |
| int sign=1; |
| celt_norm *x2, *y2; |
| mbits = b-qalloc; |
| sbits = 0; |
| /* Only need one bit for the side */ |
| if (itheta != 0 && itheta != 16384) |
| sbits = 1<<BITRES; |
| mbits -= sbits; |
| c = itheta > 8192; |
| *remaining_bits -= qalloc+sbits; |
| |
| x2 = c ? Y : X; |
| y2 = c ? X : Y; |
| if (sbits) |
| { |
| if (encode) |
| { |
| /* Here we only need to encode a sign for the side */ |
| sign = x2[0]*y2[1] - x2[1]*y2[0] > 0; |
| ec_enc_bits((ec_enc*)ec, sign, 1); |
| } else { |
| sign = ec_dec_bits((ec_dec*)ec, 1); |
| } |
| } |
| sign = 2*sign - 1; |
| quant_band(encode, m, i, x2, NULL, N, mbits, spread, B, tf_change, lowband, resynth, ec, remaining_bits, LM, lowband_out, NULL, level+1, seed); |
| y2[0] = -sign*x2[1]; |
| y2[1] = sign*x2[0]; |
| } else { |
| /* "Normal" split code */ |
| celt_norm *next_lowband2=NULL; |
| celt_norm *next_lowband_out1=NULL; |
| int next_level=0; |
| |
| /* Give more bits to low-energy MDCTs than they would otherwise deserve */ |
| if (B>1 && !stereo) |
| delta >>= 1; |
| |
| mbits = (b-qalloc-delta)/2; |
| if (mbits > b-qalloc) |
| mbits = b-qalloc; |
| if (mbits<0) |
| mbits=0; |
| sbits = b-qalloc-mbits; |
| *remaining_bits -= qalloc; |
| |
| if (lowband && !stereo) |
| next_lowband2 = lowband+N; /* >32-bit split case */ |
| |
| /* Only stereo needs to pass on lowband_out. Otherwise, it's handled at the end */ |
| if (stereo) |
| next_lowband_out1 = lowband_out; |
| else |
| next_level = level+1; |
| |
| quant_band(encode, m, i, X, NULL, N, mbits, spread, B, tf_change, lowband, resynth, ec, remaining_bits, LM, next_lowband_out1, NULL, next_level, seed); |
| quant_band(encode, m, i, Y, NULL, N, sbits, spread, B, tf_change, next_lowband2, resynth, ec, remaining_bits, LM, NULL, NULL, level, seed); |
| } |
| |
| } else { |
| /* This is the basic no-split case */ |
| q = bits2pulses(m, i, LM, b); |
| curr_bits = pulses2bits(m, i, LM, q); |
| *remaining_bits -= curr_bits; |
| |
| /* Ensures we can never bust the budget */ |
| while (*remaining_bits < 0 && q > 0) |
| { |
| *remaining_bits += curr_bits; |
| q--; |
| curr_bits = pulses2bits(m, i, LM, q); |
| *remaining_bits -= curr_bits; |
| } |
| |
| /* Finally do the actual quantization */ |
| if (encode) |
| alg_quant(X, N, q, spread, B, lowband, resynth, (ec_enc*)ec, seed); |
| else |
| alg_unquant(X, N, q, spread, B, lowband, (ec_dec*)ec, seed); |
| } |
| |
| /* This code is used by the decoder and by the resynthesis-enabled encoder */ |
| if (resynth) |
| { |
| int k; |
| |
| if (split) |
| { |
| int j; |
| celt_word16 mid, side; |
| #ifdef FIXED_POINT |
| mid = imid; |
| side = iside; |
| #else |
| mid = (1.f/32768)*imid; |
| side = (1.f/32768)*iside; |
| #endif |
| for (j=0;j<N;j++) |
| X[j] = MULT16_16_Q15(X[j], mid); |
| for (j=0;j<N;j++) |
| Y[j] = MULT16_16_Q15(Y[j], side); |
| } |
| |
| /* Undo the sample reorganization going from time order to frequency order */ |
| if (!stereo && B0>1 && level==0) |
| { |
| interleave_vector(X, N_B, B0); |
| if (lowband) |
| interleave_vector(lowband, N_B, B0); |
| } |
| |
| /* Undo time-freq changes that we did earlier */ |
| N_B = N_B0; |
| B = B0; |
| for (k=0;k<time_divide;k++) |
| { |
| B >>= 1; |
| N_B <<= 1; |
| haar1(X, N_B, B); |
| if (lowband) |
| haar1(lowband, N_B, B); |
| } |
| |
| for (k=0;k<recombine;k++) |
| { |
| haar1(X, N_B, B); |
| if (lowband) |
| haar1(lowband, N_B, B); |
| N_B>>=1; |
| B <<= 1; |
| } |
| |
| /* Scale output for later folding */ |
| if (lowband_out && !stereo) |
| { |
| int j; |
| celt_word16 n; |
| n = celt_sqrt(SHL32(EXTEND32(N0),22)); |
| for (j=0;j<N0;j++) |
| lowband_out[j] = MULT16_16_Q15(n,X[j]); |
| } |
| |
| if (stereo) |
| { |
| stereo_band_mix(m, X, Y, bandE, 0, i, -1, N); |
| /* We only need to renormalize because quantization may not |
| have preserved orthogonality of mid and side */ |
| renormalise_vector(X, Q15ONE, N, 1); |
| renormalise_vector(Y, Q15ONE, N, 1); |
| } |
| } |
| } |
| |
| void quant_all_bands(int encode, const CELTMode *m, int start, int end, celt_norm *_X, celt_norm *_Y, const celt_ener *bandE, int *pulses, int shortBlocks, int fold, int *tf_res, int resynth, int total_bits, void *ec, int LM) |
| { |
| int i, balance; |
| celt_int32 remaining_bits; |
| const celt_int16 * restrict eBands = m->eBands; |
| celt_norm * restrict norm; |
| VARDECL(celt_norm, _norm); |
| int B; |
| int M; |
| celt_int32 seed; |
| celt_norm *lowband; |
| int update_lowband = 1; |
| int C = _Y != NULL ? 2 : 1; |
| SAVE_STACK; |
| |
| M = 1<<LM; |
| B = shortBlocks ? M : 1; |
| ALLOC(_norm, M*eBands[m->nbEBands], celt_norm); |
| norm = _norm; |
| |
| if (encode) |
| seed = ((ec_enc*)ec)->rng; |
| else |
| seed = ((ec_dec*)ec)->rng; |
| balance = 0; |
| lowband = NULL; |
| for (i=start;i<end;i++) |
| { |
| int tell; |
| int b; |
| int N; |
| int curr_balance; |
| celt_norm * restrict X, * restrict Y; |
| int tf_change=0; |
| celt_norm *effective_lowband; |
| |
| X = _X+M*eBands[i]; |
| if (_Y!=NULL) |
| Y = _Y+M*eBands[i]; |
| else |
| Y = NULL; |
| N = M*eBands[i+1]-M*eBands[i]; |
| if (encode) |
| tell = ec_enc_tell((ec_enc*)ec, BITRES); |
| else |
| tell = ec_dec_tell((ec_dec*)ec, BITRES); |
| |
| /* Compute how many bits we want to allocate to this band */ |
| if (i != start) |
| balance -= tell; |
| remaining_bits = (total_bits<<BITRES)-tell-1; |
| curr_balance = (end-i); |
| if (curr_balance > 3) |
| curr_balance = 3; |
| curr_balance = balance / curr_balance; |
| b = IMIN(remaining_bits+1,pulses[i]+curr_balance); |
| if (b<0) |
| b = 0; |
| /* Prevents ridiculous bit depths */ |
| if (b > C*16*N<<BITRES) |
| b = C*16*N<<BITRES; |
| |
| if (M*eBands[i]-N >= M*eBands[start] && (update_lowband || lowband==NULL)) |
| lowband = norm+M*eBands[i]-N; |
| |
| tf_change = tf_res[i]; |
| if (i>=m->effEBands) |
| { |
| X=norm; |
| if (_Y!=NULL) |
| Y = norm; |
| } |
| |
| if (tf_change==0 && !shortBlocks && fold) |
| effective_lowband = NULL; |
| else |
| effective_lowband = lowband; |
| quant_band(encode, m, i, X, Y, N, b, fold, B, tf_change, effective_lowband, resynth, ec, &remaining_bits, LM, norm+M*eBands[i], bandE, 0, &seed); |
| |
| balance += pulses[i] + tell; |
| |
| /* Update the folding position only as long as we have 2 bit/sample depth */ |
| update_lowband = (b>>BITRES)>2*N; |
| } |
| RESTORE_STACK; |
| } |
| |