| cmake_minimum_required(VERSION 2.8.6) |
| |
| # |
| # Apple doesn't build with an install_name starting with @rpath, and |
| # neither do we with autotools; don't do so with CMake, either, and |
| # suppress warnings about that. |
| # |
| if(POLICY CMP0042) |
| cmake_policy(SET CMP0042 OLD) |
| endif() |
| |
| set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/Modules) |
| |
| project(pcap) |
| |
| # |
| # Try to enable as many C99 features as we can. |
| # At minimum, we want C++/C99-style // comments. |
| # |
| # Newer versions of compilers might default to supporting C99, but older |
| # versions may require a special flag. |
| # |
| # Prior to CMake 3.1, setting CMAKE_C_STANDARD will not have any effect, |
| # so, unless and until we require CMake 3.1 or later, we have to do it |
| # ourselves on pre-3.1 CMake, so we just do it ourselves on all versions |
| # of CMake. |
| # |
| # Note: with CMake 3.1 through 3.5, the only compilers for which CMake |
| # handles CMAKE_C_STANDARD are GCC and Clang. 3.6 adds support only |
| # for Intel C; 3.9 adds support for PGI C, Sun C, and IBM XL C, and |
| # 3.10 adds support for Cray C and IAR C, but no version of CMake has |
| # support for HP C. Therefore, even if we use CMAKE_C_STANDARD with |
| # compilers for which CMake supports it, we may still have to do it |
| # ourselves on other compilers. |
| # |
| # See the CMake documentation for the CMAKE_<LANG>_COMPILER_ID variables |
| # for a list of compiler IDs. |
| # |
| # We don't worry about MSVC; it doesn't have such a flag - either it |
| # doesn't support the C99 features we need at all, or it supports them |
| # regardless of the compiler flag. |
| # |
| # XXX - this just tests whether the option works and adds it if it does. |
| # We don't test whether it's necessary in order to get the C99 features |
| # that we use; if we ever have a user who tries to compile with a compiler |
| # that can't be made to support those features, we can add a test to make |
| # sure we actually *have* C99 support. |
| # |
| include(CheckCCompilerFlag) |
| macro(check_and_add_compiler_option _option) |
| message(STATUS "Checking C compiler flag ${_option}") |
| string(REPLACE "=" "-" _temp_option_variable ${_option}) |
| string(REGEX REPLACE "^-" "" _option_variable ${_temp_option_variable}) |
| check_c_compiler_flag("${_option}" ${_option_variable}) |
| if(${${_option_variable}}) |
| set(C_ADDITIONAL_FLAGS "${C_ADDITIONAL_FLAGS} ${_option}") |
| endif() |
| endmacro() |
| |
| set(C_ADDITIONAL_FLAGS "") |
| if(CMAKE_C_COMPILER_ID MATCHES "GNU" OR |
| CMAKE_C_COMPILER_ID MATCHES "Clang") |
| check_and_add_compiler_option("-std=gnu99") |
| elseif(CMAKE_C_COMPILER_ID MATCHES "XL") |
| # |
| # We want support for extensions picked up for GNU C compatibility, |
| # so we use -qlanglvl=extc99. |
| # |
| check_and_add_compiler_option("-qlanglvl=extc99") |
| elseif(CMAKE_C_COMPILER_ID MATCHES "HP") |
| check_and_add_compiler_option("-AC99") |
| elseif(CMAKE_C_COMPILER_ID MATCHES "Sun") |
| check_and_add_compiler_option("-xc99") |
| elseif(CMAKE_C_COMPILER_ID MATCHES "Intel") |
| check_and_add_compiler_option("-c99") |
| endif() |
| |
| # |
| # Build all runtimes in the top-level binary directory; that way, |
| # on Windows, the executables will be in the same directory as |
| # the DLLs, so the system will find pcap.dll when any of the |
| # executables are run. |
| # |
| set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/run) |
| |
| ################################################################### |
| # Parameters |
| ################################################################### |
| |
| if(WIN32) |
| # |
| # On Windows, allow the library name to be overridden, for the |
| # benefit of projects that combine libpcap with their own |
| # kernel-mode code to support capturing. |
| # |
| set(LIBRARY_NAME pcap CACHE STRING "Library name") |
| else() |
| # |
| # On UN*X, it's always been libpcap. |
| # |
| set(LIBRARY_NAME pcap) |
| endif() |
| |
| option(INET6 "Enable IPv6" ON) |
| if(WIN32) |
| option(USE_STATIC_RT "Use static Runtime" ON) |
| endif(WIN32) |
| option(BUILD_SHARED_LIBS "Build shared libraries" ON) |
| if(WIN32) |
| set(PACKET_DLL_DIR "" CACHE PATH "Path to directory with include and lib subdirectories for packet.dll") |
| endif(WIN32) |
| |
| # To pacify those who hate the protochain instruction |
| option(NO_PROTOCHAIN "Disable protochain instruction" OFF) |
| |
| # |
| # Start out with the capture mechanism type unspecified; the user |
| # can explicitly specify it and, if they don't, we'll pick an |
| # appropriate one. |
| # |
| set(PCAP_TYPE "" CACHE STRING "Packet capture type") |
| |
| # |
| # Default to having remote capture support on Windows and, for now, to |
| # not having it on UN*X. |
| # |
| if(WIN32) |
| option(ENABLE_REMOTE "Enable remote capture" ON) |
| else() |
| option(ENABLE_REMOTE "Enable remote capture" OFF) |
| endif(WIN32) |
| |
| if(CMAKE_SYSTEM_NAME STREQUAL "Linux") |
| option(PCAP_SUPPORT_PACKET_RING "Enable Linux packet ring support" ON) |
| option(BUILD_WITH_LIBNL "Build with libnl" ON) |
| endif() |
| |
| # |
| # By default, build universal with the appropriate set of architectures |
| # for the OS on which we're doing the build. |
| # |
| if(APPLE AND "${CMAKE_OSX_ARCHITECTURES}" STREQUAL "") |
| # |
| # Get the major version of Darwin. |
| # |
| string(REGEX MATCH "^([0-9]+)" SYSTEM_VERSION_MAJOR "${CMAKE_SYSTEM_VERSION}") |
| |
| if(SYSTEM_VERSION_MAJOR LESS 8) |
| # |
| # Pre-Tiger. Build only for 32-bit PowerPC. |
| # |
| set(CMAKE_OSX_ARCHITECTURES "ppc") |
| elseif(SYSTEM_VERSION_MAJOR EQUAL 8) |
| # |
| # Tiger. Is this prior to, or with, Intel support? |
| # |
| # Get the minor version of Darwin. |
| # |
| string(REPLACE "${SYSTEM_VERSION_MAJOR}." "" SYSTEM_MINOR_AND_PATCH_VERSION ${CMAKE_SYSTEM_VERSION}) |
| string(REGEX MATCH "^([0-9]+)" SYSTEM_VERSION_MINOR "${SYSTEM_MINOR_AND_PATCH_VERSION}") |
| if(SYSTEM_VERSION_MINOR LESS 4) |
| # |
| # Prior to Intel support. Build for 32-bit |
| # PowerPC and 64-bit PowerPC, with 32-bit PowerPC |
| # first. (I'm guessing that's what Apple does.) |
| # |
| set(CMAKE_OSX_ARCHITECTURES "ppc;ppc64") |
| elseif(SYSTEM_VERSION_MINOR LESS 7) |
| # |
| # With Intel support but prior to x86-64 support. |
| # Build for 32-bit PowerPC, 64-bit PowerPC, and x86, |
| # with 32-bit PowerPC first. |
| # (I'm guessing that's what Apple does.) |
| # |
| set(CMAKE_OSX_ARCHITECTURES "ppc;ppc64;i386") |
| else() |
| # |
| # With Intel support including x86-64 support. |
| # Build for 32-bit PowerPC, 64-bit PowerPC, x86, |
| # and x86-64, with 32-bit PowerPC first. |
| # (I'm guessing that's what Apple does.) |
| # |
| set(CMAKE_OSX_ARCHITECTURES "ppc;ppc64;i386;x86_64") |
| endif() |
| elseif(SYSTEM_VERSION_MAJOR EQUAL 9) |
| # |
| # Leopard. Build for 32-bit PowerPC, 64-bit |
| # PowerPC, x86, and x86-64, with 32-bit PowerPC |
| # first. (That's what Apple does.) |
| # |
| set(CMAKE_OSX_ARCHITECTURES "ppc;ppc64;i386;x86_64") |
| elseif(SYSTEM_VERSION_MAJOR EQUAL 10) |
| # |
| # Snow Leopard. Build for x86-64, x86, and |
| # 32-bit PowerPC, with x86-64 first. (That's |
| # what Apple does, even though Snow Leopard |
| # doesn't run on PPC, so PPC libpcap runs under |
| # Rosetta, and Rosetta doesn't support BPF |
| # ioctls, so PPC programs can't do live |
| # captures.) |
| # |
| set(CMAKE_OSX_ARCHITECTURES "x86_64;i386;ppc") |
| else() |
| # |
| # Post-Snow Leopard. Build for x86-64 and |
| # x86, with x86-64 first. (That's probably what |
| # Apple does, given that Rosetta is gone.) |
| # XXX - update if and when Apple drops support |
| # for 32-bit x86 code. |
| # |
| set(CMAKE_OSX_ARCHITECTURES "x86_64;i386") |
| endif() |
| endif() |
| |
| # |
| # Additional capture modules. |
| # |
| option(DISABLE_USB "Disable USB sniffing support" OFF) |
| option(DISABLE_BLUETOOTH "Disable Bluetooth sniffing support" OFF) |
| option(DISABLE_NETMAP "Disable netmap support" OFF) |
| # |
| # We don't support D-Bus sniffing on macOS; see |
| # |
| # https://bugs.freedesktop.org/show_bug.cgi?id=74029 |
| # |
| if(APPLE) |
| option(DISABLE_DBUS "Disable D-Bus sniffing support" ON) |
| else(APPLE) |
| option(DISABLE_DBUS "Disable D-Bus sniffing support" OFF) |
| endif(APPLE) |
| option(DISABLE_RDMA "Disable RDMA sniffing support" OFF) |
| |
| option(DISABLE_DAG "Disable Endace DAG card support" OFF) |
| |
| option(DISABLE_SEPTEL "Disable Septel card support" OFF) |
| set(SEPTEL_ROOT "${CMAKE_SOURCE_DIR}/../septel" CACHE PATH "Path to directory with include and lib subdirectories for Septel API") |
| |
| option(DISABLE_SNF "Disable Myricom SNF support" OFF) |
| |
| option(DISABLE_TC "Disable Riverbed TurboCap support" OFF) |
| |
| # |
| # Debugging options. |
| # |
| option(BDEBUG "Build optimizer debugging code" OFF) |
| option(YYDEBUG "Build parser debugging code" OFF) |
| |
| ################################################################### |
| # Versioning |
| ################################################################### |
| |
| # Get, parse, format and set pcap's version string from [pcap_root]/VERSION |
| # for later use. |
| |
| # Get MAJOR, MINOR, PATCH & SUFFIX |
| file(STRINGS ${pcap_SOURCE_DIR}/VERSION |
| PACKAGE_VERSION |
| LIMIT_COUNT 1 # Read only the first line |
| ) |
| |
| # Get "just" MAJOR |
| string(REGEX MATCH "^([0-9]+)" PACKAGE_VERSION_MAJOR "${PACKAGE_VERSION}") |
| |
| # Get MAJOR, MINOR & PATCH |
| string(REGEX MATCH "^([0-9]+.)?([0-9]+.)?([0-9]+)" PACKAGE_VERSION_NOSUFFIX "${PACKAGE_VERSION}") |
| |
| if(WIN32) |
| # Convert PCAP_VERSION_NOSUFFIX to Windows preferred version format |
| string(REPLACE "." "," PACKAGE_VERSION_PREDLL ${PACKAGE_VERSION_NOSUFFIX}) |
| |
| # Append NANO (used for Windows internal versioning) to PCAP_VERSION_PREDLL |
| # 0 means unused. |
| set(PACKAGE_VERSION_DLL ${PACKAGE_VERSION_PREDLL},0) |
| endif(WIN32) |
| |
| set(PACKAGE_NAME "${LIBRARY_NAME}") |
| set(PACKAGE_STRING "${LIBRARY_NAME} ${PACKAGE_VERSION}") |
| |
| ###################################### |
| # Project settings |
| ###################################### |
| |
| add_definitions(-DHAVE_CONFIG_H) |
| |
| include_directories( |
| ${CMAKE_CURRENT_BINARY_DIR} |
| ${pcap_SOURCE_DIR} |
| ) |
| |
| include(CheckFunctionExists) |
| include(CMakePushCheckState) |
| |
| if(WIN32) |
| |
| if(IS_DIRECTORY ${CMAKE_HOME_DIRECTORY}/../../Common) |
| include_directories(${CMAKE_HOME_DIRECTORY}/../../Common) |
| endif(IS_DIRECTORY ${CMAKE_HOME_DIRECTORY}/../../Common) |
| |
| find_package(Packet) |
| if(PACKET_FOUND) |
| set(HAVE_PACKET32 TRUE) |
| include_directories(${PACKET_INCLUDE_DIRS}) |
| # |
| # Check whether we have the NPcap PacketIsLoopbackAdapter() |
| # function. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES ${PACKET_LIBRARIES}) |
| check_function_exists(PacketIsLoopbackAdapter HAVE_PACKET_IS_LOOPBACK_ADAPTER) |
| cmake_pop_check_state() |
| endif(PACKET_FOUND) |
| |
| endif(WIN32) |
| |
| if(MSVC) |
| add_definitions(-D__STDC__) |
| add_definitions(-D_CRT_SECURE_NO_WARNINGS) |
| endif(MSVC) |
| |
| if(USE_STATIC_RT) |
| message(STATUS "Use STATIC runtime") |
| if(MSVC) |
| foreach(RT_FLAG |
| CMAKE_C_FLAGS CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE |
| CMAKE_C_FLAGS_MINSIZEREL CMAKE_C_FLAGS_RELWITHDEBINFO |
| CMAKE_CXX_FLAGS CMAKE_CXX_FLAGS_DEBUG CMAKE_CXX_FLAGS_RELEASE |
| CMAKE_CXX_FLAGS_MINSIZEREL CMAKE_CXX_FLAGS_RELWITHDEBINFO) |
| string(REGEX REPLACE "/MD" "/MT" ${RT_FLAG} "${${RT_FLAG}}") |
| endforeach(RT_FLAG) |
| elseif(MINGW) |
| set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -static-libgcc") |
| endif() |
| else (USE_STATIC_RT) |
| message(STATUS "Use DYNAMIC runtime") |
| endif(USE_STATIC_RT) |
| |
| ################################################################### |
| # Detect available platform features |
| ################################################################### |
| |
| include(CheckIncludeFile) |
| include(CheckIncludeFiles) |
| include(CheckStructHasMember) |
| include(CheckTypeSize) |
| |
| # |
| # Header files. |
| # |
| check_include_file(inttypes.h HAVE_INTTYPES_H) |
| check_include_file(stdint.h HAVE_STDINT_H) |
| check_include_file(unistd.h HAVE_UNISTD_H) |
| if(NOT HAVE_UNISTD_H) |
| add_definitions(-DYY_NO_UNISTD_H) |
| endif(NOT HAVE_UNISTD_H) |
| check_include_file(bitypes.h HAVE_SYS_BITYPES_H) |
| if(NOT WIN32) |
| check_include_file(sys/ioccom.h HAVE_SYS_IOCCOM_H) |
| check_include_file(sys/sockio.h HAVE_SYS_SOCKIO_H) |
| check_include_file(sys/select.h HAVE_SYS_SELECT_H) |
| endif(NOT WIN32) |
| check_include_file(limits.h HAVE_LIMITS_H) |
| if(NOT WIN32) |
| check_include_file(netpacket/packet.h HAVE_NETPACKET_PACKET_H) |
| check_include_files("sys/types.h;sys/socket.h;net/if.h;net/pfvar.h" HAVE_NET_PFVAR_H) |
| if(HAVE_NET_PFVAR_H) |
| # |
| # Check for various PF actions. |
| # |
| check_c_source_compiles( |
| "#include <sys/types.h> |
| #include <sys/socket.h> |
| #include <net/if.h> |
| #include <net/pfvar.h> |
| |
| int |
| main(void) |
| { |
| return PF_NAT+PF_NONAT+PF_BINAT+PF_NOBINAT+PF_RDR+PF_NORDR; |
| } |
| " |
| HAVE_PF_NAT_THROUGH_PF_NORDR) |
| endif(HAVE_NET_PFVAR_H) |
| check_include_file(netinet/if_ether.h HAVE_NETINET_IF_ETHER_H) |
| if(CMAKE_SYSTEM_NAME STREQUAL "Linux") |
| check_include_file(linux/sockios.h HAVE_LINUX_SOCKIOS_H) |
| # |
| # linux/if_bonding.h requires sys/socket.h. |
| # |
| check_include_files("sys/socket.h;linux/if_bonding.h" HAVE_LINUX_IF_BONDING_H) |
| endif() |
| endif(NOT WIN32) |
| |
| # |
| # Functions. |
| # |
| check_function_exists(strerror HAVE_STRERROR) |
| check_function_exists(strerror_r HAVE_STRERROR_R) |
| check_function_exists(strerror_s HAVE_STRERROR_S) |
| check_function_exists(strlcpy HAVE_STRLCPY) |
| check_function_exists(strlcat HAVE_STRLCAT) |
| check_function_exists(snprintf HAVE_SNPRINTF) |
| check_function_exists(vsnprintf HAVE_VSNPRINTF) |
| check_function_exists(strtok_r HAVE_STRTOK_R) |
| |
| # |
| # These tests are for network applications that need socket functions |
| # and getaddrinfo()/getnameinfo()-ish functions. We now require |
| # getaddrinfo() and getnameinfo(). On UN*X systems, we also prefer |
| # versions of recvmsg() that conform to the Single UNIX Specification, |
| # so that we can check whether a datagram received with recvmsg() was |
| # truncated when received due to the buffer being too small. |
| # |
| # On Windows, getaddrinfo() is in the ws2_32 library. |
| |
| # On most UN*X systems, they're available in the system library. |
| # |
| # Under Solaris, we need to link with libsocket and libnsl to get |
| # getaddrinfo() and getnameinfo() and, if we have libxnet, we need to |
| # link with libxnet before libsocket to get a version of recvmsg() |
| # that conforms to the Single UNIX Specification. |
| # |
| # We use getaddrinfo() because we want a portable thread-safe way |
| # of getting information for a host name or port; there exist _r |
| # versions of gethostbyname() and getservbyname() on some platforms, |
| # but not on all platforms. |
| # |
| # NOTE: if you hand check_library_exists as its last argument a variable |
| # that's been set, it skips the test, so we need different variables. |
| # |
| set(PCAP_LINK_LIBRARIES "") |
| include(CheckLibraryExists) |
| include(CheckSymbolExists) |
| if(WIN32) |
| # |
| # We need winsock2.h and ws2tcpip.h. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES ws2_32) |
| check_symbol_exists(getaddrinfo "winsock2.h;ws2tcpip.h" LIBWS2_32_HAS_GETADDRINFO) |
| cmake_pop_check_state() |
| if(LIBWS2_32_HAS_GETADDRINFO) |
| set(PCAP_LINK_LIBRARIES ws2_32 ${PCAP_LINK_LIBRARIES}) |
| else(LIBWS2_32_HAS_GETADDRINFO) |
| message(FATAL_ERROR "getaddrinfo is required, but wasn't found") |
| endif(LIBWS2_32_HAS_GETADDRINFO) |
| else(WIN32) |
| # |
| # UN*X. First try the system libraries, then try the libraries |
| # for Solaris and possibly other systems that picked up the |
| # System V library split. |
| # |
| check_function_exists(getaddrinfo STDLIBS_HAVE_GETADDRINFO) |
| if(NOT STDLIBS_HAVE_GETADDRINFO) |
| # |
| # Not found in the standard system libraries. |
| # Try libsocket, which requires libnsl. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES nsl) |
| check_library_exists(socket getaddrinfo "" LIBSOCKET_HAS_GETADDRINFO) |
| cmake_pop_check_state() |
| if(LIBSOCKET_HAS_GETADDRINFO) |
| # |
| # OK, we found it in libsocket. |
| # |
| set(PCAP_LINK_LIBRARIES socket nsl ${PCAP_LINK_LIBRARIES}) |
| else(LIBSOCKET_HAS_GETADDRINFO) |
| # |
| # We didn't find it. |
| # |
| message(FATAL_ERROR "getaddrinfo is required, but wasn't found") |
| endif(LIBSOCKET_HAS_GETADDRINFO) |
| |
| # |
| # OK, do we have recvmsg() in libxnet? |
| # We also link with libsocket and libnsl. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES socket nsl) |
| check_library_exists(xnet recvmsg "" LIBXNET_HAS_RECVMSG) |
| cmake_pop_check_state() |
| if(LIBXNET_HAS_RECVMSG) |
| # |
| # Yes - link with it as well. |
| # |
| set(PCAP_LINK_LIBRARIES xnet ${PCAP_LINK_LIBRARIES}) |
| endif(LIBXNET_HAS_RECVMSG) |
| endif(NOT STDLIBS_HAVE_GETADDRINFO) |
| |
| # DLPI needs putmsg under HPUX so test for -lstr while we're at it |
| check_function_exists(putmsg STDLIBS_HAVE_PUTMSG) |
| if(NOT STDLIBS_HAVE_PUTMSG) |
| check_library_exists(str putmsg "" LIBSTR_HAS_PUTMSG) |
| if(LIBSTR_HAS_PUTMSG) |
| set(PCAP_LINK_LIBRARIES str ${PCAP_LINK_LIBRARIES}) |
| endif(LIBSTR_HAS_PUTMSG) |
| endif(NOT STDLIBS_HAVE_PUTMSG) |
| endif(WIN32) |
| |
| # |
| # Check for reentrant versions of getnetbyname_r(), as provided by |
| # Linux (glibc), Solaris/IRIX, and AIX (with three different APIs!). |
| # If we don't find one, we just use getnetbyname(), which uses |
| # thread-specific data on many platforms, but doesn't use it on |
| # NetBSD or OpenBSD, and may not use it on older versions of other |
| # platforms. |
| # |
| # Only do the check if we have a declaration of getnetbyname_r(); |
| # without it, we can't check which API it has. (We assume that |
| # if there's a declaration, it has a prototype, so that the API |
| # can be checked.) |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LINK_LIBRARIES}) |
| check_symbol_exists(getnetbyname_r netdb.h NETDB_H_DECLARES_GETNETBYNAME_R) |
| if(NETDB_H_DECLARES_GETNETBYNAME_R) |
| check_c_source_compiles( |
| "#include <netdb.h> |
| |
| int |
| main(void) |
| { |
| struct netent netent_buf; |
| char buf[1024]; |
| struct netent *resultp; |
| int h_errnoval; |
| |
| return getnetbyname_r((const char *)0, &netent_buf, buf, sizeof buf, &resultp, &h_errnoval); |
| } |
| " |
| HAVE_LINUX_GETNETBYNAME_R) |
| if(NOT HAVE_LINUX_GETNETBYNAME_R) |
| check_c_source_compiles( |
| "#include <netdb.h> |
| |
| int |
| main(void) |
| { |
| struct netent netent_buf; |
| char buf[1024]; |
| |
| return getnetbyname_r((const char *)0, &netent_buf, buf, (int)sizeof buf) != NULL; |
| } |
| " |
| HAVE_SOLARIS_IRIX_GETNETBYNAME_R) |
| if(NOT HAVE_SOLARIS_IRIX_GETNETBYNAME_R) |
| check_c_source_compiles( |
| "#include <netdb.h> |
| |
| int |
| main(void) |
| { |
| struct netent netent_buf; |
| struct netent_data net_data; |
| |
| return getnetbyname_r((const char *)0, &netent_buf, &net_data); |
| } |
| " |
| HAVE_AIX_GETNETBYNAME_R) |
| endif(NOT HAVE_SOLARIS_IRIX_GETNETBYNAME_R) |
| endif(NOT HAVE_LINUX_GETNETBYNAME_R) |
| endif(NETDB_H_DECLARES_GETNETBYNAME_R) |
| cmake_pop_check_state() |
| |
| # |
| # Check for reentrant versions of getprotobyname_r(), as provided by |
| # Linux (glibc), Solaris/IRIX, and AIX (with three different APIs!). |
| # If we don't find one, we just use getprotobyname(), which uses |
| # thread-specific data on many platforms, but doesn't use it on |
| # NetBSD or OpenBSD, and may not use it on older versions of other |
| # platforms. |
| # |
| # Only do the check if we have a declaration of getprotobyname_r(); |
| # without it, we can't check which API it has. (We assume that |
| # if there's a declaration, it has a prototype, so that the API |
| # can be checked.) |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LINK_LIBRARIES}) |
| check_symbol_exists(getprotobyname_r netdb.h NETDB_H_DECLARES_GETPROTOBYNAME_R) |
| if(NETDB_H_DECLARES_GETPROTOBYNAME_R) |
| check_c_source_compiles( |
| "#include <netdb.h> |
| |
| int |
| main(void) |
| { |
| struct protoent protoent_buf; |
| char buf[1024]; |
| struct protoent *resultp; |
| |
| return getprotobyname_r((const char *)0, &protoent_buf, buf, sizeof buf, &resultp); |
| } |
| " |
| HAVE_LINUX_GETPROTOBYNAME_R) |
| if(NOT HAVE_LINUX_GETPROTOBYNAME_R) |
| check_c_source_compiles( |
| "#include <netdb.h> |
| |
| int |
| main(void) |
| { |
| struct protoent protoent_buf; |
| char buf[1024]; |
| |
| return getprotobyname_r((const char *)0, &protoent_buf, buf, (int)sizeof buf) != NULL; |
| } |
| " |
| HAVE_SOLARIS_IRIX_GETPROTOBYNAME_R) |
| if(NOT HAVE_SOLARIS_IRIX_GETPROTOBYNAME_R) |
| check_c_source_compiles( |
| "#include <netdb.h> |
| |
| int |
| main(void) |
| { |
| struct protoent protoent_buf; |
| struct protoent_data proto_data; |
| |
| return getprotobyname_r((const char *)0, &protoent_buf, &proto_data); |
| } |
| " |
| HAVE_AIX_GETPROTOBYNAME_R) |
| endif(NOT HAVE_SOLARIS_IRIX_GETPROTOBYNAME_R) |
| endif(NOT HAVE_LINUX_GETPROTOBYNAME_R) |
| endif(NETDB_H_DECLARES_GETPROTOBYNAME_R) |
| cmake_pop_check_state() |
| |
| # |
| # Data types. |
| # |
| # XXX - there's no check_type() macro that's like check_type_size() |
| # except that it only checks for the existence of the structure type, |
| # so we use check_type_size() and ignore the size. |
| # |
| cmake_push_check_state() |
| if(WIN32) |
| set(CMAKE_EXTRA_INCLUDE_FILES winsock2.h) |
| else(WIN32) |
| set(CMAKE_EXTRA_INCLUDE_FILES unistd.h sys/socket.h) |
| endif(WIN32) |
| check_type_size("struct sockaddr_storage" STRUCT_SOCKADDR_STORAGE) |
| check_type_size("socklen_t" SOCKLEN_T) |
| cmake_pop_check_state() |
| |
| # |
| # Structure fields. |
| # |
| if(WIN32) |
| check_struct_has_member("struct sockaddr" sa_len winsock2.h HAVE_STRUCT_SOCKADDR_SA_LEN) |
| else(WIN32) |
| check_struct_has_member("struct sockaddr" sa_len sys/socket.h HAVE_STRUCT_SOCKADDR_SA_LEN) |
| endif(WIN32) |
| |
| # |
| # Do we have ffs(), and is it declared in <strings.h>? |
| # |
| check_function_exists(ffs HAVE_FFS) |
| if(HAVE_FFS) |
| # |
| # OK, we have ffs(). Is it declared in <strings.h>? |
| # |
| # This test fails if we don't have <strings.h> or if we do |
| # but it doesn't declare ffs(). |
| # |
| check_symbol_exists(ffs strings.h STRINGS_H_DECLARES_FFS) |
| endif() |
| |
| # |
| # This requires the libraries that we require, as ether_hostton might be |
| # in one of those libraries. That means we have to do this after |
| # we check for those libraries. |
| # |
| # You are in a twisty little maze of UN*Xes, all different. |
| # Some might not have ether_hostton(). |
| # Some might have it and declare it in <net/ethernet.h>. |
| # Some might have it and declare it in <netinet/ether.h> |
| # Some might have it and declare it in <sys/ethernet.h>. |
| # Some might have it and declare it in <arpa/inet.h>. |
| # Some might have it and declare it in <netinet/if_ether.h>. |
| # Some might have it and not declare it in any header file. |
| # |
| # Before you is a C compiler. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LINK_LIBRARIES}) |
| check_function_exists(ether_hostton HAVE_ETHER_HOSTTON) |
| if(HAVE_ETHER_HOSTTON) |
| # |
| # OK, we have ether_hostton(). Is it declared in <net/ethernet.h>? |
| # |
| # This test fails if we don't have <net/ethernet.h> or if we do |
| # but it doesn't declare ether_hostton(). |
| # |
| check_symbol_exists(ether_hostton net/ethernet.h NET_ETHERNET_H_DECLARES_ETHER_HOSTTON) |
| if(NET_ETHERNET_H_DECLARES_ETHER_HOSTTON) |
| # |
| # Yes - we have it declared. |
| # |
| set(HAVE_DECL_ETHER_HOSTTON TRUE) |
| endif() |
| # |
| # Did that succeed? |
| # |
| if(NOT HAVE_DECL_ETHER_HOSTTON) |
| # |
| # No - how about <netinet/ether.h>, as on Linux? |
| # |
| # This test fails if we don't have <netinet/ether.h> |
| # or if we do but it doesn't declare ether_hostton(). |
| # |
| check_symbol_exists(ether_hostton netinet/ether.h NETINET_ETHER_H_DECLARES_ETHER_HOSTTON) |
| if(NETINET_ETHER_H_DECLARES_ETHER_HOSTTON) |
| # |
| # Yes - we have it declared. |
| # |
| set(HAVE_DECL_ETHER_HOSTTON TRUE) |
| endif() |
| endif() |
| # |
| # Did that succeed? |
| # |
| if(NOT HAVE_DECL_ETHER_HOSTTON) |
| # |
| # No - how about <sys/ethernet.h>, as on Solaris 10 and later? |
| # |
| # This test fails if we don't have <sys/ethernet.h> |
| # or if we do but it doesn't declare ether_hostton(). |
| # |
| check_symbol_exists(ether_hostton sys/ethernet.h SYS_ETHERNET_H_DECLARES_ETHER_HOSTTON) |
| if(SYS_ETHERNET_H_DECLARES_ETHER_HOSTTON) |
| # |
| # Yes - we have it declared. |
| # |
| set(HAVE_DECL_ETHER_HOSTTON TRUE) |
| endif() |
| endif() |
| # |
| # Did that succeed? |
| # |
| if(NOT HAVE_DECL_ETHER_HOSTTON) |
| # |
| # No, how about <arpa/inet.h>, as on AIX? |
| # |
| # This test fails if we don't have <arpa/inet.h> |
| # or if we do but it doesn't declare ether_hostton(). |
| # |
| check_symbol_exists(ether_hostton arpa/inet.h ARPA_INET_H_DECLARES_ETHER_HOSTTON) |
| if(ARPA_INET_H_DECLARES_ETHER_HOSTTON) |
| # |
| # Yes - we have it declared. |
| # |
| set(HAVE_DECL_ETHER_HOSTTON TRUE) |
| endif() |
| endif() |
| # |
| # Did that succeed? |
| # |
| if(NOT HAVE_DECL_ETHER_HOSTTON) |
| # |
| # No, how about <netinet/if_ether.h>? |
| # On some platforms, it requires <net/if.h> and |
| # <netinet/in.h>, and we always include it with |
| # both of them, so test it with both of them. |
| # |
| # This test fails if we don't have <netinet/if_ether.h> |
| # and the headers we include before it, or if we do but |
| # <netinet/if_ether.h> doesn't declare ether_hostton(). |
| # |
| check_symbol_exists(ether_hostton "sys/types.h;sys/socket.h;net/if.h;netinet/in.h;netinet/if_ether.h" NETINET_IF_ETHER_H_DECLARES_ETHER_HOSTTON) |
| if(NETINET_IF_ETHER_H_DECLARES_ETHER_HOSTTON) |
| # |
| # Yes - we have it declared. |
| # |
| set(HAVE_DECL_ETHER_HOSTTON TRUE) |
| endif() |
| endif() |
| # |
| # After all that, is ether_hostton() declared? |
| # |
| if(NOT HAVE_DECL_ETHER_HOSTTON) |
| # |
| # No, we'll have to declare it ourselves. |
| # Do we have "struct ether_addr" if we include <netinet/if_ether.h>? |
| # |
| # XXX - there's no check_type() macro that's like check_type_size() |
| # except that it only checks for the existence of the structure type, |
| # so we use check_type_size() and ignore the size. |
| # |
| cmake_push_check_state() |
| set(CMAKE_EXTRA_INCLUDE_FILES sys/types.h sys/socket.h net/if.h netinet/in.h netinet/if_ether.h) |
| check_type_size("struct ether_addr" STRUCT_ETHER_ADDR) |
| cmake_pop_check_state() |
| endif() |
| endif() |
| cmake_pop_check_state() |
| |
| # |
| # Large file support on UN*X, a/k/a LFS. |
| # |
| if(NOT WIN32) |
| include(FindLFS) |
| if(LFS_FOUND) |
| # |
| # Add the required #defines. |
| # |
| add_definitions(${LFS_DEFINITIONS}) |
| endif() |
| |
| # |
| # Check for fseeko as well. |
| # |
| include(FindFseeko) |
| if(FSEEKO_FOUND) |
| set(HAVE_FSEEKO ON) |
| |
| # |
| # Add the required #defines. |
| # |
| add_definitions(${FSEEKO_DEFINITIONS}) |
| endif() |
| endif() |
| |
| if(INET6) |
| message(STATUS "Support IPv6") |
| endif(INET6) |
| |
| # |
| # Pthreads. |
| # We might need them, because some libraries we use might use them, |
| # but we don't necessarily need them. |
| # That's only on UN*X; on Windows, if they use threads, we assume |
| # they're native Windows threads. |
| # |
| if(NOT WIN32) |
| set(CMAKE_THREAD_PREFER_PTHREAD ON) |
| find_package(Threads) |
| if(NOT CMAKE_USE_PTHREADS_INIT) |
| # |
| # If it's not pthreads, we won't use it; we use it for libraries |
| # that require it. |
| # |
| set(CMAKE_THREAD_LIBS_INIT "") |
| endif(NOT CMAKE_USE_PTHREADS_INIT) |
| endif(NOT WIN32) |
| |
| ###################################### |
| # Input files |
| ###################################### |
| |
| set(PROJECT_SOURCE_LIST_C |
| bpf_dump.c |
| bpf_filter.c |
| bpf_image.c |
| etherent.c |
| fmtutils.c |
| gencode.c |
| nametoaddr.c |
| optimize.c |
| pcap-common.c |
| pcap.c |
| savefile.c |
| sf-pcapng.c |
| sf-pcap.c |
| ) |
| |
| if(WIN32) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} missing/win_snprintf.c) |
| else() |
| if(NOT HAVE_SNPRINTF) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} missing/snprintf.c) |
| endif(NOT HAVE_SNPRINTF) |
| if(NOT HAVE_STRTOK_R) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} missing/strtok_r.c) |
| endif(NOT HAVE_STRTOK_R) |
| endif(WIN32) |
| |
| # |
| # Determine the main pcap-XXX.c file to use, and the libraries with |
| # which we need to link libpcap, if any. |
| # |
| if(WIN32) |
| # |
| # Windows. |
| # |
| # Has the user explicitly specified a capture type? |
| # |
| if(PCAP_TYPE STREQUAL "") |
| # |
| # The user didn't explicitly specify a capture mechanism. |
| # Check whether we have packet.dll. |
| # |
| if(HAVE_PACKET32) |
| # |
| # We have packet.dll. |
| # Set the capture type to NPF. |
| # |
| set(PCAP_TYPE npf) |
| else() |
| # |
| # We don't have any capture type we know about, so just use |
| # the null capture type, and only support reading (and writing) |
| # capture files. |
| # |
| set(PCAP_TYPE null) |
| endif() |
| endif() |
| else() |
| # |
| # UN*X. |
| # |
| # Figure out what type of packet capture mechanism we have, and |
| # what libraries we'd need to link libpcap with, if any. |
| # |
| |
| # |
| # Has the user explicitly specified a capture type? |
| # |
| if(PCAP_TYPE STREQUAL "") |
| # |
| # Check for a bunch of headers for various packet capture mechanisms. |
| # |
| check_include_files("sys/types.h;net/bpf.h" HAVE_NET_BPF_H) |
| if(HAVE_NET_BPF_H) |
| # |
| # Does it define BIOCSETIF? |
| # I.e., is it a header for an LBL/BSD-style capture |
| # mechanism, or is it just a header for a BPF filter |
| # engine? Some versions of Arch Linux, for example, |
| # have a net/bpf.h that doesn't define BIOCSETIF; |
| # as it's a Linux, it should use packet sockets, |
| # instead. |
| # |
| # |
| # We need: |
| # |
| # sys/types.h, because FreeBSD 10's net/bpf.h |
| # requires that various BSD-style integer types |
| # be defined; |
| # |
| # sys/ioctl.h and, if we have it, sys/ioccom.h, |
| # because net/bpf.h defines ioctls; |
| # |
| # net/if.h, because it defines some structures |
| # used in ioctls defined by net/bpf.h; |
| # |
| # sys/socket.h, because OpenBSD 5.9's net/bpf.h |
| # defines some structure fields as being |
| # struct sockaddrs; |
| # |
| # and net/bpf.h doesn't necessarily include all |
| # of those headers itself. |
| # |
| if(HAVE_SYS_IOCCOM_H) |
| check_symbol_exists(BIOCSETIF "sys/types.h;sys/ioctl.h;sys/socket.h;sys/ioccom.h;net/bpf.h;net/if.h" BPF_H_DEFINES_BIOCSETIF) |
| else(HAVE_SYS_IOCCOM_H) |
| check_symbol_exists(BIOCSETIF "sys/types.h;sys/ioctl.h;sys/socket.h;net/bpf.h;net/if.h" BPF_H_DEFINES_BIOCSETIF) |
| endif(HAVE_SYS_IOCCOM_H) |
| endif(HAVE_NET_BPF_H) |
| check_include_file(net/pfilt.h HAVE_NET_PFILT_H) |
| check_include_file(net/enet.h HAVE_NET_ENET_H) |
| check_include_file(net/nit.h HAVE_NET_NIT_H) |
| check_include_file(sys/net/nit.h HAVE_SYS_NET_NIT_H) |
| check_include_file(linux/socket.h HAVE_LINUX_SOCKET_H) |
| check_include_file(net/raw.h HAVE_NET_RAW_H) |
| check_include_file(sys/dlpi.h HAVE_SYS_DLPI_H) |
| |
| if(BPF_H_DEFINES_BIOCSETIF) |
| # |
| # BPF. |
| # Check this before DLPI, so that we pick BPF on |
| # Solaris 11 and later. |
| # |
| set(PCAP_TYPE bpf) |
| elseif(HAVE_LINUX_SOCKET_H) |
| # |
| # No prizes for guessing this one. |
| # |
| set(PCAP_TYPE linux) |
| elseif(HAVE_NET_PFILT_H) |
| # |
| # DEC OSF/1, Digital UNIX, Tru64 UNIX |
| # |
| set(PCAP_TYPE pf) |
| elseif(HAVE_NET_ENET_H) |
| # |
| # Stanford Enetfilter. |
| # |
| set(PCAP_TYPE enet) |
| elseif(HAVE_NET_NIT_H) |
| # |
| # SunOS 4.x STREAMS NIT. |
| # |
| set(PCAP_TYPE snit) |
| elseif(HAVE_SYS_NET_NIT_H) |
| # |
| # Pre-SunOS 4.x non-STREAMS NIT. |
| # |
| set(PCAP_TYPE nit) |
| elseif(HAVE_NET_RAW_H) |
| # |
| # IRIX snoop. |
| # |
| set(PCAP_TYPE snoop) |
| elseif(HAVE_SYS_DLPI_H) |
| # |
| # DLPI on pre-Solaris 11 SunOS 5, HP-UX, possibly others. |
| # |
| set(PCAP_TYPE dlpi) |
| else() |
| # |
| # Nothing we support. |
| # |
| set(PCAP_TYPE null) |
| endif() |
| endif() |
| endif(WIN32) |
| message(STATUS "Packet capture mechanism type: ${PCAP_TYPE}") |
| |
| # |
| # Do capture-mechanism-dependent tests. |
| # |
| if(WIN32) |
| if(PCAP_TYPE STREQUAL "npf") |
| # |
| # Link with packet.dll before WinSock2. |
| # |
| set(PCAP_LINK_LIBRARIES ${PACKET_LIBRARIES} ${PCAP_LINK_LIBRARIES}) |
| elseif(PCAP_TYPE STREQUAL "null") |
| else() |
| message(ERROR "${PCAP_TYPE} is not a valid pcap type") |
| endif() |
| else(WIN32) |
| if(PCAP_TYPE STREQUAL "dlpi") |
| # |
| # Needed for common functions used by pcap-[dlpi,libdlpi].c |
| # |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} dlpisubs.c) |
| |
| # |
| # Checks for some header files. |
| # |
| check_include_file(sys/bufmod.h HAVE_SYS_BUFMOD_H) |
| check_include_file(sys/dlpi_ext.h HAVE_SYS_DLPI_EXT_H) |
| |
| # |
| # Checks to see if Solaris has the public libdlpi(3LIB) library. |
| # Note: The existence of /usr/include/libdlpi.h does not mean it is the |
| # public libdlpi(3LIB) version. Before libdlpi was made public, a |
| # private version also existed, which did not have the same APIs. |
| # Due to a gcc bug, the default search path for 32-bit libraries does |
| # not include /lib, we add it explicitly here. |
| # [http://bugs.opensolaris.org/view_bug.do?bug_id=6619485]. |
| # Also, due to the bug above applications that link to libpcap with |
| # libdlpi will have to add "-L/lib" option to "configure". |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_FLAGS "-L/lib") |
| set(CMAKE_REQUIRED_LIBRARIES dlpi) |
| check_function_exists(dlpi_walk HAVE_LIBDLPI) |
| cmake_pop_check_state() |
| if(HAVE_LIBDLPI) |
| # |
| # XXX - add -L/lib |
| # |
| set(PCAP_LINK_LIBRARIES ${PCAP_LINK_LIBRARIES} dlpi) |
| set(PCAP_TYPE libdlpi) |
| endif() |
| |
| # |
| # This check is for Solaris with DLPI support for passive modes. |
| # See dlpi(7P) for more details. |
| # |
| # XXX - there's no check_type() macro that's like check_type_size() |
| # except that it only checks for the existence of the structure type, |
| # so we use check_type_size() and ignore the size. |
| # |
| cmake_push_check_state() |
| set(CMAKE_EXTRA_INCLUDE_FILES sys/types.h sys/dlpi.h) |
| check_type_size(dl_passive_req_t DL_PASSIVE_REQ_T) |
| cmake_pop_check_state() |
| elseif(PCAP_TYPE STREQUAL "linux") |
| # |
| # Do we have the wireless extensions? |
| # linux/wireless.h requires sys/socket.h. |
| # |
| check_include_files("sys/socket.h;linux/wireless.h" HAVE_LINUX_WIRELESS_H) |
| |
| # |
| # Do we have libnl? |
| # |
| if(BUILD_WITH_LIBNL) |
| # |
| # Try libnl 3.x first. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES nl-3) |
| check_function_exists(nl_socket_alloc HAVE_LIBNL) |
| cmake_pop_check_state() |
| if(HAVE_LIBNL) |
| # |
| # Yes, we have libnl 3.x. |
| # |
| set(PCAP_LINK_LIBRARIES nl-genl-3 nl-3 ${PCAP_LINK_LIBRARIES}) |
| set(HAVE_LIBNL_3_x ON) |
| set(HAVE_LIBNL_NLE ON) |
| set(HAVE_LIBNL_SOCKETS ON) |
| include_directories("/usr/include/libnl3") |
| else() |
| # |
| # Try libnl 2.x. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES nl) |
| check_function_exists(nl_socket_alloc HAVE_LIBNL) |
| cmake_pop_check_state() |
| if(HAVE_LIBNL) |
| # |
| # Yes, we have libnl 2.x. |
| # |
| set(PCAP_LINK_LIBRARIES nl-genl nl ${PCAP_LINK_LIBRARIES}) |
| set(HAVE_LIBNL_2_x ON) |
| set(HAVE_LIBNL_NLE ON) |
| set(HAVE_LIBNL_SOCKETS ON) |
| else() |
| # |
| # No, we don't; do we have libnl 1.x? |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES nl) |
| check_function_exists(nl_handle_alloc HAVE_LIBNL) |
| cmake_pop_check_state() |
| if(HAVE_LIBNL) |
| set(PCAP_LINK_LIBRARIES nl ${PCAP_LINK_LIBRARIES}) |
| endif() |
| endif() |
| endif() |
| endif() |
| |
| check_include_file(linux/ethtool.h HAVE_LINUX_ETHTOOL_H) |
| |
| # |
| # Checks to see if tpacket_stats is defined in linux/if_packet.h |
| # If so then pcap-linux.c can use this to report proper statistics. |
| # |
| # XXX - there's no check_type() macro that's like check_type_size() |
| # except that it only checks for the existence of the structure type, |
| # so we use check_type_size() and ignore the size. |
| # |
| cmake_push_check_state() |
| set(CMAKE_EXTRA_INCLUDE_FILES linux/if_packet.h) |
| check_type_size("struct tpacket_stats" STRUCT_TPACKET_STATS) |
| cmake_pop_check_state() |
| |
| check_struct_has_member("struct tpacket_auxdata" tp_vlan_tci linux/if_packet.h HAVE_STRUCT_TPACKET_AUXDATA_TP_VLAN_TCI) |
| elseif(PCAP_TYPE STREQUAL "bpf") |
| # |
| # Check whether we have the *BSD-style ioctls. |
| # |
| check_include_files("sys/types.h;net/if_media.h" HAVE_NET_IF_MEDIA_H) |
| |
| # |
| # Check whether we have struct BPF_TIMEVAL. |
| # |
| # XXX - there's no check_type() macro that's like check_type_size() |
| # except that it only checks for the existence of the structure type, |
| # so we use check_type_size() and ignore the size. |
| # |
| cmake_push_check_state() |
| if(HAVE_SYS_IOCCOM_H) |
| set(CMAKE_EXTRA_INCLUDE_FILES sys/types.h sys/ioccom.h net/bpf.h) |
| check_type_size("struct BPF_TIMEVAL" STRUCT_BPF_TIMEVAL) |
| else() |
| set(CMAKE_EXTRA_INCLUDE_FILES sys/types.h net/bpf.h) |
| check_type_size("struct BPF_TIMEVAL" STRUCT_BPF_TIMEVAL) |
| endif() |
| cmake_pop_check_state() |
| elseif(PCAP_TYPE STREQUAL "null") |
| else() |
| message(FATAL_ERROR "${PCAP_TYPE} is not a valid pcap type") |
| endif() |
| endif(WIN32) |
| |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-${PCAP_TYPE}.c) |
| |
| # |
| # Now figure out how we get a list of interfaces and addresses, |
| # if we support capturing. Don't bother if we don't support |
| # capturing. |
| # |
| if(NOT WIN32) |
| # |
| # UN*X - figure out what type of interface list mechanism we |
| # have. |
| # |
| # If the capture type is null, that means we can't capture, |
| # so we can't open any capture devices, so we won't return |
| # any interfaces. |
| # |
| if(NOT PCAP_TYPE STREQUAL "null") |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LINK_LIBRARIES}) |
| check_function_exists(getifaddrs HAVE_GETIFADDRS) |
| cmake_pop_check_state() |
| if(NOT HAVE_GETIFADDRS) |
| # |
| # It's not in the libraries that, at this point, we've |
| # found we need to link libpcap with. |
| # |
| # It's in libsocket on Solaris and possibly other OSes; |
| # as long as we're not linking with libxnet, check there. |
| # |
| # NOTE: if you hand check_library_exists as its last |
| # argument a variable that's been set, it skips the test, |
| # so we need different variables. |
| # |
| if(NOT LIBXNET_HAS_GETHOSTBYNAME) |
| check_library_exists(socket getifaddrs "" SOCKET_HAS_GETIFADDRS) |
| if(SOCKET_HAS_GETIFADDRS) |
| set(PCAP_LINK_LIBRARIES socket ${PCAP_LINK_LIBRARIES}) |
| set(HAVE_GETIFADDRS TRUE) |
| endif() |
| endif() |
| endif() |
| if(HAVE_GETIFADDRS) |
| # |
| # We have "getifaddrs()"; make sure we have <ifaddrs.h> |
| # as well, just in case some platform is really weird. |
| # It may require that sys/types.h be included first, |
| # so include it first. |
| # |
| check_include_files("sys/types.h;ifaddrs.h" HAVE_IFADDRS_H) |
| if(HAVE_IFADDRS_H) |
| # |
| # We have the header, so we use "getifaddrs()" to |
| # get the list of interfaces. |
| # |
| set(FINDALLDEVS_TYPE getad) |
| else() |
| # |
| # We don't have the header - give up. |
| # XXX - we could also fall back on some other |
| # mechanism, but, for now, this'll catch this |
| # problem so that we can at least try to figure |
| # out something to do on systems with "getifaddrs()" |
| # but without "ifaddrs.h", if there is something |
| # we can do on those systems. |
| # |
| message(FATAL_ERROR "Your system has getifaddrs() but doesn't have a usable <ifaddrs.h>.") |
| endif() |
| else() |
| # |
| # Well, we don't have "getifaddrs()", at least not with the |
| # libraries with which we've decided we need to link |
| # libpcap with, so we have to use some other mechanism. |
| # |
| # Note that this may happen on Solaris, which has |
| # getifaddrs(), but in -lsocket, not in -lxnet, so we |
| # won't find it if we link with -lxnet, which we want |
| # to do for other reasons. |
| # |
| # For now, we use either the SIOCGIFCONF ioctl or the |
| # SIOCGLIFCONF ioctl, preferring the latter if we have |
| # it; the latter is a Solarisism that first appeared |
| # in Solaris 8. (Solaris's getifaddrs() appears to |
| # be built atop SIOCGLIFCONF; using it directly |
| # avoids a not-all-that-useful middleman.) |
| # |
| try_compile(HAVE_SIOCGLIFCONF ${CMAKE_CURRENT_BINARY_DIR} "${pcap_SOURCE_DIR}/cmake/have_siocglifconf.c" ) |
| if(HAVE_SIOCGLIFCONF) |
| set(FINDALLDEVS_TYPE glifc) |
| else() |
| set(FINDALLDEVS_TYPE gifc) |
| endif() |
| endif() |
| message(STATUS "Find-interfaces mechanism type: ${FINDALLDEVS_TYPE}") |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} fad-${FINDALLDEVS_TYPE}.c) |
| endif() |
| endif() |
| |
| # Check for hardware timestamp support. |
| if(CMAKE_SYSTEM_NAME STREQUAL "Linux") |
| check_include_file(linux/net_tstamp.h HAVE_LINUX_NET_TSTAMP_H) |
| endif() |
| |
| # |
| # Check for additional native sniffing capabilities. |
| # |
| |
| # Check for USB sniffing support on Linux. |
| # On FreeBSD, it uses BPF, so we don't need to do anything special here. |
| if(NOT DISABLE_USB) |
| if(CMAKE_SYSTEM_NAME STREQUAL "Linux") |
| set(PCAP_SUPPORT_USB TRUE) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-usb-linux.c) |
| set(LINUX_USB_MON_DEV /dev/usbmon) |
| # |
| # Do we have a version of <linux/compiler.h> available? |
| # If so, we might need it for <linux/usbdevice_fs.h>. |
| # |
| check_include_files("linux/compiler.h" HAVE_LINUX_COMPILER_H) |
| if(HAVE_LINUX_COMPILER_H) |
| # |
| # Yes - include it when testing for <linux/usbdevice_fs.h>. |
| # |
| check_include_files("linux/compiler.h;linux/usbdevice_fs.h" HAVE_LINUX_USBDEVICE_FS_H) |
| else(HAVE_LINUX_COMPILER_H) |
| check_include_files("linux/usbdevice_fs.h" HAVE_LINUX_USBDEVICE_FS_H) |
| endif(HAVE_LINUX_COMPILER_H) |
| if(HAVE_LINUX_USBDEVICE_FS_H) |
| # |
| # OK, does it define bRequestType? Older versions of the kernel |
| # define fields with names like "requesttype, "request", and |
| # "value", rather than "bRequestType", "bRequest", and |
| # "wValue". |
| # |
| if(HAVE_LINUX_COMPILER_H) |
| check_struct_has_member("struct usbdevfs_ctrltransfer" bRequestType "linux/compiler.h;linux/usbdevice_fs.h" HAVE_STRUCT_USBDEVFS_CTRLTRANSFER_BREQUESTTYPE) |
| else(HAVE_LINUX_COMPILER_H) |
| check_struct_has_member("struct usbdevfs_ctrltransfer" bRequestType "linux/usbdevice_fs.h" HAVE_STRUCT_USBDEVFS_CTRLTRANSFER_BREQUESTTYPE) |
| endif(HAVE_LINUX_COMPILER_H) |
| endif() |
| endif() |
| endif() |
| |
| # Check for netfilter sniffing support. |
| if(CMAKE_SYSTEM_NAME STREQUAL "Linux") |
| # |
| # Life's too short to deal with trying to get this to compile |
| # if you don't get the right types defined with |
| # __KERNEL_STRICT_NAMES getting defined by some other include. |
| # |
| # Check whether the includes Just Work. If not, don't turn on |
| # netfilter support. |
| # |
| check_c_source_compiles( |
| "#include <sys/socket.h> |
| #include <netinet/in.h> |
| #include <linux/types.h> |
| |
| #include <linux/netlink.h> |
| #include <linux/netfilter.h> |
| #include <linux/netfilter/nfnetlink.h> |
| #include <linux/netfilter/nfnetlink_log.h> |
| #include <linux/netfilter/nfnetlink_queue.h> |
| |
| int |
| main(void) |
| { |
| return 0; |
| } |
| " |
| PCAP_SUPPORT_NETFILTER) |
| if(PCAP_SUPPORT_NETFILTER) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-netfilter-linux.c) |
| endif(PCAP_SUPPORT_NETFILTER) |
| endif() |
| |
| # Check for netmap sniffing support. |
| if(NOT DISABLE_NETMAP) |
| # |
| # Check whether net/netmap_user.h is usable if NETMAP_WITH_LIBS is |
| # defined; it's not usable on DragonFly BSD 4.6 if NETMAP_WITH_LIBS |
| # is defined, for example, as it includes a non-existent malloc.h |
| # header. |
| # |
| check_c_source_compiles( |
| "#define NETMAP_WITH_LIBS |
| #include <net/netmap_user.h> |
| |
| int |
| main(void) |
| { |
| return 0; |
| } |
| " |
| PCAP_SUPPORT_NETMAP) |
| if(PCAP_SUPPORT_NETMAP) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-netmap.c) |
| endif(PCAP_SUPPORT_NETMAP) |
| endif() |
| |
| # Check for Bluetooth sniffing support |
| if(NOT DISABLE_BLUETOOTH) |
| if(CMAKE_SYSTEM_NAME STREQUAL "Linux") |
| check_include_file(bluetooth/bluetooth.h HAVE_BLUETOOTH_BLUETOOTH_H) |
| if(HAVE_BLUETOOTH_BLUETOOTH_H) |
| set(PCAP_SUPPORT_BT TRUE) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-bt-linux.c) |
| # |
| # OK, does struct sockaddr_hci have an hci_channel |
| # member? |
| # |
| check_struct_has_member("struct sockaddr_hci" hci_channel "bluetooth/bluetooth.h;bluetooth/hci.h" HAVE_STRUCT_SOCKADDR_HCI_HCI_CHANNEL) |
| if(HAVE_STRUCT_SOCKADDR_HCI_HCI_CHANNEL) |
| # |
| # OK, is HCI_CHANNEL_MONITOR defined? |
| # |
| check_c_source_compiles( |
| "#include <bluetooth/bluetooth.h> |
| #include <bluetooth/hci.h> |
| |
| int |
| main(void) |
| { |
| u_int i = HCI_CHANNEL_MONITOR; |
| return 0; |
| } |
| " |
| PCAP_SUPPORT_BT_MONITOR) |
| if(PCAP_SUPPORT_BT_MONITOR) |
| # |
| # Yes, so we can also support Bluetooth monitor |
| # sniffing. |
| # |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-bt-monitor-linux.c) |
| endif(PCAP_SUPPORT_BT_MONITOR) |
| endif(HAVE_STRUCT_SOCKADDR_HCI_HCI_CHANNEL) |
| endif(HAVE_BLUETOOTH_BLUETOOTH_H) |
| endif() |
| endif() |
| |
| # Check for Bluetooth sniffing support |
| if(NOT DISABLE_DBUS) |
| # |
| # We don't support D-Bus sniffing on macOS; see |
| # |
| # https://bugs.freedesktop.org/show_bug.cgi?id=74029 |
| # |
| if(APPLE) |
| message(FATAL_ERROR "Due to freedesktop.org bug 74029, D-Bus capture support is not available on macOS") |
| endif(APPLE) |
| include(FindPkgConfig) |
| pkg_check_modules(DBUS dbus-1) |
| if(DBUS_FOUND) |
| set(PCAP_SUPPORT_DBUS TRUE) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-dbus.c) |
| include_directories(${DBUS_INCLUDE_DIRS}) |
| set(PCAP_LINK_LIBRARIES ${PCAP_LINK_LIBRARIES} ${DBUS_LIBRARIES}) |
| endif(DBUS_FOUND) |
| endif(NOT DISABLE_DBUS) |
| |
| # Check for RDMA sniffing support |
| if(NOT DISABLE_RDMA) |
| check_library_exists(ibverbs ibv_get_device_list "" LIBIBVERBS_HAS_IBV_GET_DEVICE_LIST) |
| if(LIBIBVERBS_HAS_IBV_GET_DEVICE_LIST) |
| check_include_file(infiniband/verbs.h HAVE_INFINIBAND_VERBS_H) |
| if(HAVE_INFINIBAND_VERBS_H) |
| check_symbol_exists(ibv_create_flow infiniband/verbs.h PCAP_SUPPORT_RDMASNIFF) |
| if(PCAP_SUPPORT_RDMASNIFF) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-rdmasniff.c) |
| set(PCAP_LINK_LIBRARIES ibverbs ${PCAP_LINK_LIBRARIES}) |
| endif(PCAP_SUPPORT_RDMASNIFF) |
| endif(HAVE_INFINIBAND_VERBS_H) |
| endif(LIBIBVERBS_HAS_IBV_GET_DEVICE_LIST) |
| endif(NOT DISABLE_RDMA) |
| |
| # |
| # Check for sniffing capabilities using third-party APIs. |
| # |
| |
| # Check for Endace DAG card support. |
| if(NOT DISABLE_DAG) |
| # |
| # Try to find the DAG header file and library. |
| # |
| find_package(DAG) |
| |
| # |
| # Did we succeed? |
| # |
| if(DAG_FOUND) |
| # |
| # Yes. |
| # Check for various DAG API functions. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_INCLUDES ${DAG_INCLUDE_DIRS}) |
| set(CMAKE_REQUIRED_LIBRARIES ${DAG_LIBRARIES}) |
| check_function_exists(dag_attach_stream HAVE_DAG_STREAMS_API) |
| if(NOT HAVE_DAG_STREAMS_API) |
| message(FATAL_ERROR "DAG library lacks streams support") |
| endif() |
| check_function_exists(dag_attach_stream64 HAVE_DAG_LARGE_STREAMS_API) |
| check_function_exists(dag_get_erf_types HAVE_DAG_GET_ERF_TYPES) |
| check_function_exists(dag_get_stream_erf_types HAVE_DAG_GET_STREAM_ERF_TYPES) |
| cmake_pop_check_state() |
| |
| include_directories(AFTER ${DAG_INCLUDE_DIRS}) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-dag.c) |
| set(HAVE_DAG_API TRUE) |
| set(PCAP_LINK_LIBRARIES ${PCAP_LINK_LIBRARIES} ${DAG_LIBRARIES}) |
| |
| if(HAVE_DAG_LARGE_STREAMS_API) |
| get_filename_component(DAG_LIBRARY_DIR ${DAG_LIBRARY} PATH) |
| check_library_exists(vdag vdag_set_device_info ${DAG_LIBRARY_DIR} HAVE_DAG_VDAG) |
| if(HAVE_DAG_VDAG) |
| set(PCAP_LINK_LIBRARIES ${PCAP_LINK_LIBRARIES} ${CMAKE_THREAD_LIBS_INIT}) |
| endif() |
| endif() |
| endif() |
| endif() |
| |
| # Check for Septel card support. |
| set(PROJECT_EXTERNAL_OBJECT_LIST "") |
| if(NOT DISABLE_SEPTEL) |
| # |
| # Do we have the msg.h header? |
| # |
| set(SEPTEL_INCLUDE_DIRS "${SEPTEL_ROOT}/INC") |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_INCLUDES ${SEPTEL_INCLUDE_DIRS}) |
| check_include_file(msg.h HAVE_INC_MSG_H) |
| cmake_pop_check_state() |
| if(HAVE_INC_MSG_H) |
| # |
| # Yes. |
| # |
| include_directories(AFTER ${SEPTEL_INCLUDE_DIRS}) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-septel.c) |
| set(PROJECT_EXTERNAL_OBJECT_LIST ${PROJECT_EXTERNAL_OBJECT_LIST} "${SEPTEL_ROOT}/asciibin.o ${SEPTEL_ROOT}/bit2byte.o ${SEPTEL_ROOT}/confirm.o ${SEPTEL_ROOT}/fmtmsg.o ${SEPTEL_ROOT}/gct_unix.o ${SEPTEL_ROOT}/hqueue.o ${SEPTEL_ROOT}/ident.o ${SEPTEL_ROOT}/mem.o ${SEPTEL_ROOT}/pack.o ${SEPTEL_ROOT}/parse.o ${SEPTEL_ROOT}/pool.o ${SEPTEL_ROOT}/sdlsig.o ${SEPTEL_ROOT}/strtonum.o ${SEPTEL_ROOT}/timer.o ${SEPTEL_ROOT}/trace.o") |
| set(HAVE_SEPTEL_API TRUE) |
| endif() |
| endif() |
| |
| # Check for Myricom SNF support. |
| if(NOT DISABLE_SNF) |
| # |
| # Try to find the SNF header file and library. |
| # |
| find_package(SNF) |
| |
| # |
| # Did we succeed? |
| # |
| if(SNF_FOUND) |
| # |
| # Yes. |
| # |
| include_directories(AFTER ${SNF_INCLUDE_DIRS}) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-snf.c) |
| set(HAVE_SNF_API TRUE) |
| set(PCAP_LINK_LIBRARIES ${PCAP_LINK_LIBRARIES} ${SNF_LIBRARIES}) |
| endif() |
| endif() |
| |
| # Check for Riverbed TurboCap support. |
| if(NOT DISABLE_TC) |
| # |
| # Try to find the TurboCap header file and library. |
| # |
| find_package(TC) |
| |
| # |
| # Did we succeed? |
| # |
| if(TC_FOUND) |
| # |
| # Yes. |
| # |
| include_directories(AFTER ${TC_INCLUDE_DIRS}) |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} pcap-tc.c) |
| set(HAVE_TC_API TRUE) |
| set(PCAP_LINK_LIBRARIES "${PCAP_LINK_LIBRARIES} ${TC_LIBRARIES} ${CMAKE_USE_PTHREADS_INIT} stdc++") |
| endif() |
| endif() |
| |
| # |
| # Remote capture support. |
| # |
| |
| if(ENABLE_REMOTE) |
| # |
| # Check for various members of struct msghdr. |
| # We need to include ftmacros.h on some platforms, to make sure we |
| # get the POSIX/Single USER Specification version of struct msghdr, |
| # which has those members, rather than the backwards-compatible |
| # version, which doesn't. That's not a system header file, and |
| # at least some versions of CMake include it as <ftmacros.h>, which |
| # won't check the current directory, so we add the top-level |
| # source directory to the list of include directories when we do |
| # the check. |
| # |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_INCLUDES ${CMAKE_SOURCE_DIR}) |
| check_struct_has_member("struct msghdr" msg_control "ftmacros.h;sys/socket.h" HAVE_STRUCT_MSGHDR_MSG_CONTROL) |
| check_struct_has_member("struct msghdr" msg_flags "ftmacros.h;sys/socket.h" HAVE_STRUCT_MSGHDR_MSG_FLAGS) |
| cmake_pop_check_state() |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} |
| pcap-new.c pcap-rpcap.c rpcap-protocol.c sockutils.c) |
| endif(ENABLE_REMOTE) |
| |
| ################################################################### |
| # Warning options |
| ################################################################### |
| |
| # |
| # Check and add warning options if we have a .devel file. |
| # |
| if(EXISTS ${CMAKE_SOURCE_DIR}/.devel OR EXISTS ${CMAKE_BINARY_DIR}/.devel) |
| # |
| # Warning options. |
| # |
| if(MSVC AND NOT ${CMAKE_C_COMPILER} MATCHES "clang*") |
| # |
| # MSVC, with Microsoft's front end and code generator. |
| # "MSVC" is also set for Microsoft's compiler with a Clang |
| # front end and their code generator ("Clang/C2"), so we |
| # check for clang.exe and treat that differently. |
| # |
| check_and_add_compiler_option(-Wall) |
| # |
| # Disable some pointless warnings that /Wall turns on. |
| # |
| # Unfortunately, MSVC does not appear to have an equivalent |
| # to "__attribute__((unused))" to mark a particular function |
| # parameter as being known to be unused, so that the compiler |
| # won't warn about it (for example, the function might have |
| # that parameter because a pointer to it is being used, and |
| # the signature of that function includes that parameter). |
| # C++ lets you give a parameter a type but no name, but C |
| # doesn't have that. |
| # |
| check_and_add_compiler_option(-wd4100) |
| # |
| # In theory, we care whether somebody uses f() rather than |
| # f(void) to declare a function with no arguments, but, in |
| # practice, there are places in the Windows header files |
| # that appear to do that, so we squelch that warning. |
| # |
| check_and_add_compiler_option(-wd4255) |
| # |
| # Windows FD_SET() generates this, so we suppress it. |
| # |
| check_and_add_compiler_option(-wd4548) |
| # |
| # Perhaps testing something #defined to be 0 with #ifdef is an |
| # error, and it should be tested with #if, but perhaps it's |
| # not, and Microsoft does that in its headers, so we squelch |
| # that warning. |
| # |
| check_and_add_compiler_option(-wd4574) |
| # |
| # The Windows headers also test not-defined values in #if, so |
| # we don't want warnings about that, either. |
| # |
| check_and_add_compiler_option(-wd4668) |
| # |
| # We do *not* care whether some function is, or isn't, going to be |
| # expanded inline. |
| # |
| check_and_add_compiler_option(-wd4710) |
| check_and_add_compiler_option(-wd4711) |
| # |
| # We do *not* care whether we're adding padding bytes after |
| # structure members. |
| # |
| check_and_add_compiler_option(-wd4820) |
| else() |
| # |
| # Other compilers, including MSVC with a Clang front end and |
| # Microsoft's code generator. We currently treat them as if |
| # they might support GCC-style -W options. |
| # |
| check_and_add_compiler_option(-Wall) |
| check_and_add_compiler_option(-Wsign-compare) |
| check_and_add_compiler_option(-Wmissing-prototypes) |
| check_and_add_compiler_option(-Wstrict-prototypes) |
| check_and_add_compiler_option(-Wshadow) |
| check_and_add_compiler_option(-Wdeclaration-after-statement) |
| check_and_add_compiler_option(-Wused-but-marked-unused) |
| check_and_add_compiler_option(-Wdocumentation) |
| check_and_add_compiler_option(-Wcomma) |
| check_and_add_compiler_option(-Wmissing-noreturn) |
| # Warns about safeguards added in case the enums are extended |
| # check_and_add_compiler_option(-Wcovered-switch-default) |
| check_and_add_compiler_option(-Wmissing-variable-declarations) |
| check_and_add_compiler_option(-Wunused-parameter) |
| check_and_add_compiler_option(-Wformat-nonliteral) |
| check_and_add_compiler_option(-Wunreachable-code) |
| endif() |
| endif() |
| |
| # |
| # Suppress some warnings we get with MSVC even without /Wall. |
| # |
| if(MSVC AND NOT ${CMAKE_C_COMPILER} MATCHES "clang*") |
| # |
| # Yes, we have some functions that never return but that |
| # have a non-void return type. That's because, on some |
| # platforms, they *do* return values but, on other |
| # platforms, including Windows, they just fail and |
| # longjmp out by calling bpf_error(). |
| # |
| check_and_add_compiler_option(-wd4646) |
| endif() |
| |
| file(GLOB PROJECT_SOURCE_LIST_H |
| *.h |
| pcap/*.h |
| ) |
| |
| # |
| # Try to have the compiler default to hiding symbols, so that only |
| # symbols explicitly exported with PCAP_API will be visible outside |
| # (shared) libraries. |
| # |
| # Not necessary with MSVC, as that's the default. |
| # |
| # XXX - we don't use ADD_COMPILER_EXPORT_FLAGS, because, as of CMake |
| # 2.8.12.2, it doesn't know about Sun C/Oracle Studio, and, as of |
| # CMake 2.8.6, it only sets the C++ compiler flags, rather than |
| # allowing an arbitrary variable to be set with the "hide symbols |
| # not explicitly exported" flag. |
| # |
| if(NOT MSVC) |
| if(CMAKE_C_COMPILER_ID MATCHES "SunPro") |
| # |
| # Sun C/Oracle Studio. |
| # |
| check_and_add_compiler_option(-xldscope=hidden) |
| else() |
| # |
| # Try this for all other compilers; it's what GCC uses, |
| # and a number of other compilers, such as Clang and Intel C, |
| # use it as well. |
| # |
| check_and_add_compiler_option(-fvisibility=hidden) |
| endif() |
| endif(NOT MSVC) |
| |
| # |
| # Flex/Lex and YACC/Berkeley YACC/Bison. |
| # From a mail message to the CMake mailing list by Andy Cedilnik of |
| # Kitware. |
| # |
| |
| # |
| # Try to find Flex, a Windows version of Flex, or Lex. |
| # |
| find_program(LEX_EXECUTABLE NAMES flex win_flex lex) |
| if(LEX_EXECUTABLE STREQUAL "LEX_EXECUTABLE-NOTFOUND") |
| message(FATAL_ERROR "Neither flex nor win_flex nor lex was found.") |
| endif() |
| message(STATUS "Lexical analyzer generator: ${LEX_EXECUTABLE}") |
| |
| add_custom_command( |
| OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/scanner.c ${CMAKE_CURRENT_BINARY_DIR}/scanner.h |
| SOURCE ${pcap_SOURCE_DIR}/scanner.l |
| COMMAND ${LEX_EXECUTABLE} -P pcap_ --header-file=scanner.h --nounput -o${CMAKE_CURRENT_BINARY_DIR}/scanner.c ${pcap_SOURCE_DIR}/scanner.l |
| DEPENDS ${pcap_SOURCE_DIR}/scanner.l |
| ) |
| |
| # |
| # Since scanner.c does not exist yet when cmake is run, mark |
| # it as generated. |
| # |
| # Since scanner.c includes grammar.h, mark that as a dependency. |
| # |
| set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/scanner.c PROPERTIES |
| GENERATED TRUE |
| OBJECT_DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/grammar.h |
| ) |
| |
| # |
| # Add scanner.c to the list of sources. |
| # |
| #set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} ${CMAKE_CURRENT_BINARY_DIR}/scanner.c) |
| |
| # |
| # Try to find YACC or Bison. |
| # |
| find_program(YACC_EXECUTABLE NAMES bison win_bison byacc yacc) |
| if(YACC_EXECUTABLE STREQUAL "YACC_EXECUTABLE-NOTFOUND") |
| message(FATAL_ERROR "Neither bison nor win_bison nor byacc nor yacc was found.") |
| endif() |
| message(STATUS "Parser generator: ${YACC_EXECUTABLE}") |
| |
| # |
| # Create custom command for the scanner. |
| # Find out whether it's Bison or not by looking at the last component |
| # of the path (without a .exe extension, if this is Windows). |
| # |
| get_filename_component(YACC_NAME ${YACC_EXECUTABLE} NAME_WE) |
| if("${YACC_NAME}" STREQUAL "bison" OR "${YACC_NAME}" STREQUAL "win_bison") |
| set(YACC_COMPATIBILITY_FLAG "-y") |
| endif() |
| add_custom_command( |
| OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/grammar.c ${CMAKE_CURRENT_BINARY_DIR}/grammar.h |
| SOURCE ${pcap_SOURCE_DIR}/grammar.y |
| COMMAND ${YACC_EXECUTABLE} ${YACC_COMPATIBILITY_FLAG} -p pcap_ -o ${CMAKE_CURRENT_BINARY_DIR}/grammar.c -d ${pcap_SOURCE_DIR}/grammar.y |
| DEPENDS ${pcap_SOURCE_DIR}/grammar.y |
| ) |
| |
| # |
| # Since grammar.c does not exists yet when cmake is run, mark |
| # it as generated. |
| # |
| set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/grammar.c PROPERTIES |
| GENERATED TRUE |
| OBJECT_DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/scanner.h |
| ) |
| |
| # |
| # Add grammar.c to the list of sources. |
| # |
| #set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} ${CMAKE_CURRENT_BINARY_DIR}/grammar.c) |
| |
| # |
| # Assume, by default, no support for shared libraries and V7/BSD |
| # convention for man pages (file formats in section 5, miscellaneous |
| # info in section 7, administrative commands and daemons in section 8). |
| # Individual cases can override this. |
| # |
| set(MAN_FILE_FORMATS 5) |
| set(MAN_MISC_INFO 7) |
| set(MAN_ADMIN_COMMANDS 8) |
| if(CMAKE_SYSTEM_NAME STREQUAL "AIX") |
| # Workaround to enable certain features |
| set(_SUN TRUE) |
| if(PCAP_TYPE STREQUAL "bpf") |
| # |
| # If we're using BPF, we need libodm and libcfg, as |
| # we use them to load the BPF module. |
| # |
| set(PCAP_LINK_LIBRARIES ${PCAP_LINK_LIBRARIES} odm cfg) |
| endif() |
| elseif(CMAKE_SYSTEM_NAME STREQUAL "HP-UX") |
| if(CMAKE_SYSTEM_VERSION MATCHES "[A-Z.]*9\.[0-9]*") |
| # |
| # HP-UX 9.x. |
| # |
| set(HAVE_HPUX9 TRUE) |
| elseif(CMAKE_SYSTEM_VERSION MATCHES "[A-Z.]*10\.0") |
| # |
| # HP-UX 10.0. |
| # |
| elseif(CMAKE_SYSTEM_VERSION MATCHES "[A-Z.]*10\.1") |
| # |
| # HP-UX 10.1. |
| # |
| else() |
| # |
| # HP-UX 10.20 and later. |
| # |
| set(HAVE_HPUX10_20_OR_LATER TRUE) |
| endif() |
| |
| # |
| # Use System V conventions for man pages. |
| # |
| set(MAN_ADMIN_COMMANDS 1m) |
| set(MAN_FILE_FORMATS 4) |
| set(MAN_MISC_INFO 5) |
| elseif(CMAKE_SYSTEM_NAME STREQUAL "IRIX" OR CMAKE_SYSTEM_NAME STREQUAL "IRIX64") |
| # |
| # Use IRIX conventions for man pages; they're the same as the |
| # System V conventions, except that they use section 8 for |
| # administrative commands and daemons. |
| # |
| set(MAN_FILE_FORMATS 4) |
| set(MAN_MISC_INFO 5) |
| elseif(CMAKE_SYSTEM_NAME STREQUAL "OSF1") |
| # |
| # DEC OSF/1, a/k/a Digial UNIX, a/k/a Tru64 UNIX. |
| # Use Tru64 UNIX conventions for man pages; they're the same as the |
| # System V conventions except that they use section 8 for |
| # administrative commands and daemons. |
| # |
| set(MAN_FILE_FORMATS 4) |
| set(MAN_MISC_INFO 5) |
| elseif(CMAKE_SYSTEM_NAME STREQUAL "SunOS" AND CMAKE_SYSTEM_VERSION MATCHES "5[.][0-9.]*") |
| # |
| # SunOS 5.x. |
| # |
| set(HAVE_SOLARIS TRUE) |
| # |
| # Make sure errno is thread-safe, in case we're called in |
| # a multithreaded program. We don't guarantee that two |
| # threads can use the *same* pcap_t safely, but the |
| # current version does guarantee that you can use different |
| # pcap_t's in different threads, and even that pcap_compile() |
| # is thread-safe (it wasn't thread-safe in some older versions). |
| # |
| add_definitions(-D_TS_ERRNO) |
| |
| if(CMAKE_SYSTEM_VERSION STREQUAL "5.12") |
| else() |
| # |
| # Use System V conventions for man pages. |
| # |
| set(MAN_ADMIN_COMMANDS 1m) |
| set(MAN_FILE_FORMATS 4) |
| set(MAN_MISC_INFO 5) |
| endif() |
| endif() |
| |
| source_group("Source Files" FILES ${PROJECT_SOURCE_LIST_C}) |
| source_group("Header Files" FILES ${PROJECT_SOURCE_LIST_H}) |
| |
| if(WIN32) |
| # |
| # Add pcap-dll.rc to the list of sources. |
| # |
| set(PROJECT_SOURCE_LIST_C ${PROJECT_SOURCE_LIST_C} ${pcap_SOURCE_DIR}/pcap-dll.rc) |
| endif(WIN32) |
| |
| # |
| # Add subdirectories after we've set various variables, so they pick up |
| # pick up those variables. |
| # |
| if(ENABLE_REMOTE) |
| add_subdirectory(rpcapd) |
| endif(ENABLE_REMOTE) |
| add_subdirectory(testprogs) |
| |
| ###################################### |
| # Register targets |
| ###################################### |
| |
| # |
| # Special target to serialize the building of the generated source. |
| # |
| # See |
| # |
| # http://public.kitware.com/pipermail/cmake/2013-August/055510.html |
| # |
| add_custom_target(SerializeTarget |
| DEPENDS |
| ${CMAKE_CURRENT_BINARY_DIR}/grammar.c |
| ${CMAKE_CURRENT_BINARY_DIR}/scanner.c |
| ) |
| |
| set_source_files_properties(${PROJECT_EXTERNAL_OBJECT_LIST} PROPERTIES |
| EXTERNAL_OBJECT TRUE) |
| |
| if(BUILD_SHARED_LIBS) |
| add_library(${LIBRARY_NAME} SHARED |
| ${PROJECT_SOURCE_LIST_C} |
| ${CMAKE_CURRENT_BINARY_DIR}/grammar.c |
| ${CMAKE_CURRENT_BINARY_DIR}/scanner.c |
| ${PROJECT_EXTERNAL_OBJECT_LIST} |
| ) |
| add_dependencies(${LIBRARY_NAME} SerializeTarget) |
| set_target_properties(${LIBRARY_NAME} PROPERTIES |
| COMPILE_DEFINITIONS BUILDING_PCAP) |
| endif(BUILD_SHARED_LIBS) |
| |
| add_library(${LIBRARY_NAME}_static STATIC |
| ${PROJECT_SOURCE_LIST_C} |
| ${CMAKE_CURRENT_BINARY_DIR}/grammar.c |
| ${CMAKE_CURRENT_BINARY_DIR}/scanner.c |
| ${PROJECT_EXTERNAL_OBJECT_LIST} |
| ) |
| add_dependencies(${LIBRARY_NAME}_static SerializeTarget) |
| set_target_properties(${LIBRARY_NAME}_static PROPERTIES |
| COMPILE_DEFINITIONS BUILDING_PCAP) |
| |
| if(WIN32) |
| if(BUILD_SHARED_LIBS) |
| set_target_properties(${LIBRARY_NAME} PROPERTIES |
| VERSION ${PACKAGE_VERSION_NOSUFFIX} # only MAJOR and MINOR are needed |
| ) |
| endif(BUILD_SHARED_LIBS) |
| if(MSVC) |
| # XXX For DLLs, the TARGET_PDB_FILE generator expression can be used to locate |
| # its PDB file's output directory for installation. |
| # cmake doesn't offer a generator expression for PDB files generated by the |
| # compiler (static libraries). |
| # So instead of considering any possible output there is (there are many), |
| # this will search for the PDB file in the compiler's initial output directory, |
| # which is always ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles\wpcap_static.dir |
| # regardless of architecture, build generator etc. |
| # Quite hackish indeed. |
| set(CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY $<TARGET_FILE_DIR:${LIBRARY_NAME}_static>) |
| set_target_properties(${LIBRARY_NAME}_static PROPERTIES |
| COMPILE_PDB_NAME ${LIBRARY_NAME}_static |
| OUTPUT_NAME "${LIBRARY_NAME}_static" |
| ) |
| elseif(MINGW) |
| # |
| # For compatibility, build the shared library without the "lib" prefix on |
| # MinGW as well. |
| # |
| set_target_properties(${LIBRARY_NAME} PROPERTIES |
| PREFIX "" |
| OUTPUT_NAME "${LIBRARY_NAME}" |
| ) |
| set_target_properties(${LIBRARY_NAME}_static PROPERTIES |
| OUTPUT_NAME "${LIBRARY_NAME}" |
| ) |
| endif() |
| else(WIN32) # UN*X |
| if(BUILD_SHARED_LIBS) |
| if(APPLE) |
| set_target_properties(${LIBRARY_NAME} PROPERTIES |
| VERSION ${PACKAGE_VERSION} |
| SOVERSION A |
| ) |
| else(APPLE) |
| set_target_properties(${LIBRARY_NAME} PROPERTIES |
| VERSION ${PACKAGE_VERSION} |
| SOVERSION ${PACKAGE_VERSION_MAJOR} |
| ) |
| endif(APPLE) |
| endif(BUILD_SHARED_LIBS) |
| set_target_properties(${LIBRARY_NAME}_static PROPERTIES |
| OUTPUT_NAME "${LIBRARY_NAME}" |
| ) |
| endif(WIN32) |
| |
| if(BUILD_SHARED_LIBS) |
| if(NOT C_ADDITIONAL_FLAGS STREQUAL "") |
| set_target_properties(${LIBRARY_NAME} PROPERTIES COMPILE_FLAGS ${C_ADDITIONAL_FLAGS}) |
| endif() |
| target_link_libraries(${LIBRARY_NAME} ${PCAP_LINK_LIBRARIES}) |
| endif(BUILD_SHARED_LIBS) |
| |
| if(NOT C_ADDITIONAL_FLAGS STREQUAL "") |
| set_target_properties(${LIBRARY_NAME}_static PROPERTIES COMPILE_FLAGS ${C_ADDITIONAL_FLAGS}) |
| endif() |
| |
| ###################################### |
| # Write out the config.h file |
| ###################################### |
| |
| configure_file(${CMAKE_CURRENT_SOURCE_DIR}/cmakeconfig.h.in ${CMAKE_CURRENT_BINARY_DIR}/config.h) |
| |
| ###################################### |
| # Install pcap library, include files, and man pages |
| ###################################### |
| |
| # |
| # "Define GNU standard installation directories", which actually |
| # are also defined, to some degree, by autotools, and at least |
| # some of which are general UN*X conventions. |
| # |
| include(GNUInstallDirs) |
| |
| set(LIBRARY_NAME_STATIC ${LIBRARY_NAME}_static) |
| |
| function(install_manpage_symlink SOURCE TARGET MANDIR) |
| if(MINGW) |
| find_program(LINK_EXECUTABLE ln) |
| if(LINK_EXECUTABLE) |
| set(LINK_COMMAND "\"${LINK_EXECUTABLE}\" \"-s\" \"${SOURCE}\" \"${TARGET}\"") |
| else(LINK_EXECUTABLE) |
| message(FATAL_ERROR "ln (http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ln.html) not found.") |
| endif(LINK_EXECUTABLE) |
| else(MINGW) |
| set(LINK_COMMAND "\"${CMAKE_COMMAND}\" \"-E\" \"create_symlink\" \"${SOURCE}\" \"${TARGET}\"") |
| endif(MINGW) |
| |
| install(CODE |
| "message(STATUS \"Symlinking: ${CMAKE_INSTALL_PREFIX}/${MANDIR}/${SOURCE} to ${TARGET}\") |
| execute_process( |
| COMMAND \"${CMAKE_COMMAND}\" \"-E\" \"remove\" \"${TARGET}\" |
| WORKING_DIRECTORY ${CMAKE_INSTALL_PREFIX}/${MANDIR} |
| ) |
| execute_process( |
| COMMAND ${LINK_COMMAND} |
| WORKING_DIRECTORY ${CMAKE_INSTALL_PREFIX}/${MANDIR} |
| RESULT_VARIABLE EXIT_STATUS |
| ) |
| if(NOT EXIT_STATUS EQUAL 0) |
| message(FATAL_ERROR \"Could not create symbolic link from ${CMAKE_INSTALL_PREFIX}/${MANDIR}/${SOURCE} to ${TARGET}\") |
| endif() |
| set(CMAKE_INSTALL_MANIFEST_FILES \${CMAKE_INSTALL_MANIFEST_FILES} ${CMAKE_INSTALL_PREFIX}/${MANDIR}/${TARGET})") |
| endfunction(install_manpage_symlink) |
| |
| set(MAN1_NOEXPAND pcap-config.1) |
| set(MAN3PCAP_EXPAND |
| pcap.3pcap.in |
| pcap_compile.3pcap.in |
| pcap_datalink.3pcap.in |
| pcap_dump_open.3pcap.in |
| pcap_get_tstamp_precision.3pcap.in |
| pcap_list_datalinks.3pcap.in |
| pcap_list_tstamp_types.3pcap.in |
| pcap_open_dead.3pcap.in |
| pcap_open_offline.3pcap.in |
| pcap_set_tstamp_precision.3pcap.in |
| pcap_set_tstamp_type.3pcap.in |
| ) |
| set(MAN3PCAP_NOEXPAND |
| pcap_activate.3pcap |
| pcap_breakloop.3pcap |
| pcap_can_set_rfmon.3pcap |
| pcap_close.3pcap |
| pcap_create.3pcap |
| pcap_datalink_name_to_val.3pcap |
| pcap_datalink_val_to_name.3pcap |
| pcap_dump.3pcap |
| pcap_dump_close.3pcap |
| pcap_dump_file.3pcap |
| pcap_dump_flush.3pcap |
| pcap_dump_ftell.3pcap |
| pcap_file.3pcap |
| pcap_fileno.3pcap |
| pcap_findalldevs.3pcap |
| pcap_freecode.3pcap |
| pcap_get_required_select_timeout.3pcap |
| pcap_get_selectable_fd.3pcap |
| pcap_geterr.3pcap |
| pcap_inject.3pcap |
| pcap_is_swapped.3pcap |
| pcap_lib_version.3pcap |
| pcap_lookupdev.3pcap |
| pcap_lookupnet.3pcap |
| pcap_loop.3pcap |
| pcap_major_version.3pcap |
| pcap_next_ex.3pcap |
| pcap_offline_filter.3pcap |
| pcap_open_live.3pcap |
| pcap_set_buffer_size.3pcap |
| pcap_set_datalink.3pcap |
| pcap_set_immediate_mode.3pcap |
| pcap_set_promisc.3pcap |
| pcap_set_protocol_linux.3pcap |
| pcap_set_rfmon.3pcap |
| pcap_set_snaplen.3pcap |
| pcap_set_timeout.3pcap |
| pcap_setdirection.3pcap |
| pcap_setfilter.3pcap |
| pcap_setnonblock.3pcap |
| pcap_snapshot.3pcap |
| pcap_stats.3pcap |
| pcap_statustostr.3pcap |
| pcap_strerror.3pcap |
| pcap_tstamp_type_name_to_val.3pcap |
| pcap_tstamp_type_val_to_name.3pcap |
| ) |
| set(MANFILE_EXPAND pcap-savefile.manfile.in) |
| set(MANMISC_EXPAND |
| pcap-filter.manmisc.in |
| pcap-linktype.manmisc.in |
| pcap-tstamp.manmisc.in |
| ) |
| |
| if(NOT BUILD_SHARED_LIBS) |
| unset(LIBRARY_NAME) |
| endif(NOT BUILD_SHARED_LIBS) |
| |
| if(WIN32) |
| if(MSVC AND CMAKE_SIZEOF_VOID_P EQUAL 8) |
| # |
| # Install 64-bit code built with MSVC in the amd64 subdirectories, |
| # as that's where it expects it to be. |
| # |
| install(TARGETS ${LIBRARY_NAME} ${LIBRARY_NAME_STATIC} |
| RUNTIME DESTINATION bin/amd64 |
| LIBRARY DESTINATION lib/amd64 |
| ARCHIVE DESTINATION lib/amd64) |
| if(NOT MINGW) |
| install(FILES $<TARGET_FILE_DIR:${LIBRARY_NAME_STATIC}>/${LIBRARY_NAME_STATIC}.pdb |
| DESTINATION bin/amd64 OPTIONAL) |
| if(BUILD_SHARED_LIBS) |
| install(FILES $<TARGET_PDB_FILE:${LIBRARY_NAME}> |
| DESTINATION bin/amd64 OPTIONAL) |
| endif(BUILD_SHARED_LIBS) |
| endif(NOT MINGW) |
| else(MSVC AND CMAKE_SIZEOF_VOID_P EQUAL 8) |
| # |
| # Install 32-bit code, and 64-bit code not built with MSVC |
| # in the top-level directories, as those are where they |
| # expect it to be. |
| # |
| install(TARGETS ${LIBRARY_NAME} ${LIBRARY_NAME_STATIC} |
| RUNTIME DESTINATION bin |
| LIBRARY DESTINATION lib |
| ARCHIVE DESTINATION lib) |
| if(NOT MINGW) |
| install(FILES $<TARGET_FILE_DIR:${LIBRARY_NAME_STATIC}>/${LIBRARY_NAME_STATIC}.pdb |
| DESTINATION bin OPTIONAL) |
| if(BUILD_SHARED_LIBS) |
| install(FILES $<TARGET_PDB_FILE:${LIBRARY_NAME}> |
| DESTINATION bin OPTIONAL) |
| endif(BUILD_SHARED_LIBS) |
| endif(NOT MINGW) |
| endif(MSVC AND CMAKE_SIZEOF_VOID_P EQUAL 8) |
| else(WIN32) |
| install(TARGETS ${LIBRARY_NAME} ${LIBRARY_NAME_STATIC} DESTINATION lib) |
| endif(WIN32) |
| |
| install(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/pcap/ DESTINATION include/pcap) |
| install(FILES ${CMAKE_CURRENT_SOURCE_DIR}/pcap.h DESTINATION include) |
| install(FILES ${CMAKE_CURRENT_SOURCE_DIR}/pcap-bpf.h DESTINATION include) |
| install(FILES ${CMAKE_CURRENT_SOURCE_DIR}/pcap-namedb.h DESTINATION include) |
| |
| # On UN*X, and on Windows when not using MSVC, generate libpcap.pc and |
| # pcap-config and process man pages and arrange that they be installed. |
| if(NOT MSVC) |
| set(PACKAGE_NAME ${LIBRARY_NAME}) |
| set(prefix ${CMAKE_INSTALL_PREFIX}) |
| set(exec_prefix "\${prefix}") |
| set(includedir "\${prefix}/include") |
| set(libdir "\${exec_prefix}/lib") |
| if(CMAKE_SYSTEM_NAME STREQUAL "FreeBSD" OR |
| CMAKE_SYSTEM_NAME STREQUAL "NetBSD" OR |
| CMAKE_SYSTEM_NAME STREQUAL "OpenBSD" OR |
| CMAKE_SYSTEM_NAME STREQUAL "DragonFly BSD" OR |
| CMAKE_SYSTEM_NAME STREQUAL "Linux" OR |
| CMAKE_SYSTEM_NAME STREQUAL "OSF1") |
| # |
| # Platforms where the linker is the GNU linker |
| # or accepts command-line arguments like |
| # those the GNU linker accepts. |
| # |
| set(V_RPATH_OPT "-Wl,-rpath,") |
| elseif(CMAKE_SYSTEM_NAME STREQUAL "SunOS" AND CMAKE_SYSTEM_VERSION MATCHES "5[.][0-9.]*") |
| # |
| # SunOS 5.x. |
| # |
| # XXX - this assumes GCC is using the Sun linker, |
| # rather than the GNU linker. |
| # |
| set(V_RPATH_OPT "-Wl,-R,") |
| else() |
| # |
| # No option needed to set the RPATH. |
| # |
| set(V_RPATH_OPT "") |
| endif() |
| set(LIBS "") |
| foreach(LIB ${PCAP_LINK_LIBRARIES}) |
| set(LIBS "${LIBS} -l${LIB}") |
| endforeach(LIB) |
| configure_file(${CMAKE_SOURCE_DIR}/pcap-config.in ${CMAKE_CURRENT_BINARY_DIR}/pcap-config @ONLY) |
| configure_file(${CMAKE_SOURCE_DIR}/libpcap.pc.in ${CMAKE_CURRENT_BINARY_DIR}/libpcap.pc @ONLY) |
| install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/pcap-config DESTINATION bin) |
| install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpcap.pc DESTINATION lib/pkgconfig) |
| |
| # |
| # Man pages. |
| # |
| # For each section of the manual for which we have man pages |
| # that require macro expansion, do the expansion. |
| # |
| set(MAN1 "") |
| foreach(MANPAGE ${MAN1_NOEXPAND}) |
| set(MAN1 ${MAN1} ${CMAKE_SOURCE_DIR}/${MANPAGE}) |
| endforeach(MANPAGE) |
| install(FILES ${MAN1} DESTINATION ${CMAKE_INSTALL_MANDIR}/man1) |
| |
| set(MAN3PCAP "") |
| foreach(MANPAGE ${MAN3PCAP_NOEXPAND}) |
| set(MAN3PCAP ${MAN3PCAP} ${CMAKE_SOURCE_DIR}/${MANPAGE}) |
| endforeach(MANPAGE) |
| foreach(TEMPLATE_MANPAGE ${MAN3PCAP_EXPAND}) |
| string(REPLACE ".in" "" MANPAGE ${TEMPLATE_MANPAGE}) |
| configure_file(${CMAKE_SOURCE_DIR}/${TEMPLATE_MANPAGE} ${CMAKE_CURRENT_BINARY_DIR}/${MANPAGE} @ONLY) |
| set(MAN3PCAP ${MAN3PCAP} ${CMAKE_CURRENT_BINARY_DIR}/${MANPAGE}) |
| endforeach(TEMPLATE_MANPAGE) |
| install(FILES ${MAN3PCAP} DESTINATION ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_datalink_val_to_name.3pcap pcap_datalink_val_to_description.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_dump_open.3pcap pcap_dump_fopen.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_findalldevs.3pcap pcap_freealldevs.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_geterr.3pcap pcap_perror.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_inject.3pcap pcap_sendpacket.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_list_datalinks.3pcap pcap_free_datalinks.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_list_tstamp_types.3pcap pcap_free_tstamp_types.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_loop.3pcap pcap_dispatch.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_major_version.3pcap pcap_minor_version.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_next_ex.3pcap pcap_next.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_open_dead.3pcap pcap_open_dead_with_tstamp_precision.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_open_offline.3pcap pcap_open_offline_with_tstamp_precision.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_open_offline.3pcap pcap_fopen_offline.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_open_offline.3pcap pcap_fopen_offline_with_tstamp_precision.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_tstamp_type_val_to_name.3pcap pcap_tstamp_type_val_to_description.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| install_manpage_symlink(pcap_setnonblock.3pcap pcap_getnonblock.3pcap ${CMAKE_INSTALL_MANDIR}/man3) |
| |
| set(MANFILE "") |
| foreach(TEMPLATE_MANPAGE ${MANFILE_EXPAND}) |
| string(REPLACE ".manfile.in" ".${MAN_FILE_FORMATS}" MANPAGE ${TEMPLATE_MANPAGE}) |
| configure_file(${CMAKE_SOURCE_DIR}/${TEMPLATE_MANPAGE} ${CMAKE_CURRENT_BINARY_DIR}/${MANPAGE} @ONLY) |
| set(MANFILE ${MANFILE} ${CMAKE_CURRENT_BINARY_DIR}/${MANPAGE}) |
| endforeach(TEMPLATE_MANPAGE) |
| install(FILES ${MANFILE} DESTINATION ${CMAKE_INSTALL_MANDIR}/man${MAN_FILE_FORMATS}) |
| |
| set(MANMISC "") |
| foreach(TEMPLATE_MANPAGE ${MANMISC_EXPAND}) |
| string(REPLACE ".manmisc.in" ".${MAN_MISC_INFO}" MANPAGE ${TEMPLATE_MANPAGE}) |
| configure_file(${CMAKE_SOURCE_DIR}/${TEMPLATE_MANPAGE} ${CMAKE_CURRENT_BINARY_DIR}/${MANPAGE} @ONLY) |
| set(MANMISC ${MANMISC} ${CMAKE_CURRENT_BINARY_DIR}/${MANPAGE}) |
| endforeach(TEMPLATE_MANPAGE) |
| install(FILES ${MANMISC} DESTINATION ${CMAKE_INSTALL_MANDIR}/man${MAN_MISC_INFO}) |
| endif(NOT MSVC) |
| |
| # uninstall target |
| configure_file( |
| "${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in" |
| "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" |
| IMMEDIATE @ONLY) |
| |
| add_custom_target(uninstall |
| COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake) |