| |
| /* pngread.c - read a PNG file |
| * |
| * Last changed in libpng 1.6.0 [(PENDING RELEASE)] |
| * Copyright (c) 1998-2012 Glenn Randers-Pehrson |
| * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) |
| * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) |
| * |
| * This code is released under the libpng license. |
| * For conditions of distribution and use, see the disclaimer |
| * and license in png.h |
| * |
| * This file contains routines that an application calls directly to |
| * read a PNG file or stream. |
| */ |
| |
| #include "pngpriv.h" |
| #if defined PNG_SIMPLIFIED_READ_SUPPORTED && defined PNG_STDIO_SUPPORTED |
| # include <errno.h> |
| #endif |
| |
| #ifdef PNG_READ_SUPPORTED |
| |
| /* Create a PNG structure for reading, and allocate any memory needed. */ |
| PNG_FUNCTION(png_structp,PNGAPI |
| png_create_read_struct,(png_const_charp user_png_ver, png_voidp error_ptr, |
| png_error_ptr error_fn, png_error_ptr warn_fn),PNG_ALLOCATED) |
| { |
| #ifndef PNG_USER_MEM_SUPPORTED |
| png_structp png_ptr = png_create_png_struct(user_png_ver, error_ptr, |
| error_fn, warn_fn, NULL, NULL, NULL); |
| #else |
| return png_create_read_struct_2(user_png_ver, error_ptr, error_fn, |
| warn_fn, NULL, NULL, NULL); |
| } |
| |
| /* Alternate create PNG structure for reading, and allocate any memory |
| * needed. |
| */ |
| PNG_FUNCTION(png_structp,PNGAPI |
| png_create_read_struct_2,(png_const_charp user_png_ver, png_voidp error_ptr, |
| png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr, |
| png_malloc_ptr malloc_fn, png_free_ptr free_fn),PNG_ALLOCATED) |
| { |
| png_structp png_ptr = png_create_png_struct(user_png_ver, error_ptr, |
| error_fn, warn_fn, mem_ptr, malloc_fn, free_fn); |
| #endif /* PNG_USER_MEM_SUPPORTED */ |
| |
| if (png_ptr != NULL) |
| { |
| png_ptr->mode = PNG_IS_READ_STRUCT; |
| |
| /* Added in libpng-1.6.0; this can be used to detect a read structure if |
| * required (it will be zero in a write structure.) |
| */ |
| # ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| png_ptr->IDAT_read_size = PNG_IDAT_READ_SIZE; |
| # endif |
| |
| # ifdef PNG_BENIGN_READ_ERRORS_SUPPORTED |
| png_ptr->flags |= PNG_FLAG_BENIGN_ERRORS_WARN; |
| |
| /* In stable builds only warn if an application error can be completely |
| * handled. |
| */ |
| # if PNG_LIBPNG_BUILD_BASE_TYPE >= PNG_LIBPNG_BUILD_RC |
| png_ptr->flags |= PNG_FLAG_APP_WARNINGS_WARN; |
| # endif |
| # endif |
| |
| /* TODO: delay this, it can be done in png_init_io (if the app doesn't |
| * do it itself) avoiding setting the default function if it is not |
| * required. |
| */ |
| png_set_read_fn(png_ptr, NULL, NULL); |
| } |
| |
| return png_ptr; |
| } |
| |
| |
| #ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| /* Read the information before the actual image data. This has been |
| * changed in v0.90 to allow reading a file that already has the magic |
| * bytes read from the stream. You can tell libpng how many bytes have |
| * been read from the beginning of the stream (up to the maximum of 8) |
| * via png_set_sig_bytes(), and we will only check the remaining bytes |
| * here. The application can then have access to the signature bytes we |
| * read if it is determined that this isn't a valid PNG file. |
| */ |
| void PNGAPI |
| png_read_info(png_structrp png_ptr, png_inforp info_ptr) |
| { |
| #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED |
| int keep; |
| #endif |
| |
| png_debug(1, "in png_read_info"); |
| |
| if (png_ptr == NULL || info_ptr == NULL) |
| return; |
| |
| /* Read and check the PNG file signature. */ |
| png_read_sig(png_ptr, info_ptr); |
| |
| for (;;) |
| { |
| png_uint_32 length = png_read_chunk_header(png_ptr); |
| png_uint_32 chunk_name = png_ptr->chunk_name; |
| |
| /* IDAT logic needs to happen here to simplify getting the two flags |
| * right. |
| */ |
| if (chunk_name == png_IDAT) |
| { |
| if (!(png_ptr->mode & PNG_HAVE_IHDR)) |
| png_chunk_error(png_ptr, "Missing IHDR before IDAT"); |
| |
| else if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE && |
| !(png_ptr->mode & PNG_HAVE_PLTE)) |
| png_chunk_error(png_ptr, "Missing PLTE before IDAT"); |
| |
| else if (png_ptr->mode & PNG_AFTER_IDAT) |
| png_chunk_benign_error(png_ptr, "Too many IDATs found"); |
| |
| png_ptr->mode |= PNG_HAVE_IDAT; |
| } |
| |
| else if (png_ptr->mode & PNG_HAVE_IDAT) |
| png_ptr->mode |= PNG_AFTER_IDAT; |
| |
| /* This should be a binary subdivision search or a hash for |
| * matching the chunk name rather than a linear search. |
| */ |
| if (chunk_name == png_IHDR) |
| png_handle_IHDR(png_ptr, info_ptr, length); |
| |
| else if (chunk_name == png_IEND) |
| png_handle_IEND(png_ptr, info_ptr, length); |
| |
| #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED |
| else if ((keep = png_chunk_unknown_handling(png_ptr, chunk_name)) != 0) |
| { |
| png_handle_unknown(png_ptr, info_ptr, length, keep); |
| |
| if (chunk_name == png_PLTE) |
| png_ptr->mode |= PNG_HAVE_PLTE; |
| |
| else if (chunk_name == png_IDAT) |
| { |
| png_ptr->idat_size = 0; /* It has been consumed */ |
| break; |
| } |
| } |
| #endif |
| else if (chunk_name == png_PLTE) |
| png_handle_PLTE(png_ptr, info_ptr, length); |
| |
| else if (chunk_name == png_IDAT) |
| { |
| png_ptr->idat_size = length; |
| break; |
| } |
| |
| #ifdef PNG_READ_bKGD_SUPPORTED |
| else if (chunk_name == png_bKGD) |
| png_handle_bKGD(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_cHRM_SUPPORTED |
| else if (chunk_name == png_cHRM) |
| png_handle_cHRM(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_gAMA_SUPPORTED |
| else if (chunk_name == png_gAMA) |
| png_handle_gAMA(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_hIST_SUPPORTED |
| else if (chunk_name == png_hIST) |
| png_handle_hIST(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_oFFs_SUPPORTED |
| else if (chunk_name == png_oFFs) |
| png_handle_oFFs(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_pCAL_SUPPORTED |
| else if (chunk_name == png_pCAL) |
| png_handle_pCAL(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sCAL_SUPPORTED |
| else if (chunk_name == png_sCAL) |
| png_handle_sCAL(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_pHYs_SUPPORTED |
| else if (chunk_name == png_pHYs) |
| png_handle_pHYs(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sBIT_SUPPORTED |
| else if (chunk_name == png_sBIT) |
| png_handle_sBIT(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sRGB_SUPPORTED |
| else if (chunk_name == png_sRGB) |
| png_handle_sRGB(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_iCCP_SUPPORTED |
| else if (chunk_name == png_iCCP) |
| png_handle_iCCP(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sPLT_SUPPORTED |
| else if (chunk_name == png_sPLT) |
| png_handle_sPLT(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_tEXt_SUPPORTED |
| else if (chunk_name == png_tEXt) |
| png_handle_tEXt(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_tIME_SUPPORTED |
| else if (chunk_name == png_tIME) |
| png_handle_tIME(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_tRNS_SUPPORTED |
| else if (chunk_name == png_tRNS) |
| png_handle_tRNS(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_zTXt_SUPPORTED |
| else if (chunk_name == png_zTXt) |
| png_handle_zTXt(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_iTXt_SUPPORTED |
| else if (chunk_name == png_iTXt) |
| png_handle_iTXt(png_ptr, info_ptr, length); |
| #endif |
| |
| else |
| png_handle_unknown(png_ptr, info_ptr, length, |
| PNG_HANDLE_CHUNK_AS_DEFAULT); |
| } |
| } |
| #endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ |
| |
| /* Optional call to update the users info_ptr structure */ |
| void PNGAPI |
| png_read_update_info(png_structrp png_ptr, png_inforp info_ptr) |
| { |
| png_debug(1, "in png_read_update_info"); |
| |
| if (png_ptr != NULL) |
| { |
| if ((png_ptr->flags & PNG_FLAG_ROW_INIT) == 0) |
| { |
| png_read_start_row(png_ptr); |
| |
| # ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| png_read_transform_info(png_ptr, info_ptr); |
| # else |
| PNG_UNUSED(info_ptr) |
| # endif |
| } |
| |
| /* New in 1.6.0 this avoids the bug of doing the initializations twice */ |
| else |
| png_app_error(png_ptr, |
| "png_read_update_info/png_start_read_image: duplicate call"); |
| } |
| } |
| |
| #ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| /* Initialize palette, background, etc, after transformations |
| * are set, but before any reading takes place. This allows |
| * the user to obtain a gamma-corrected palette, for example. |
| * If the user doesn't call this, we will do it ourselves. |
| */ |
| void PNGAPI |
| png_start_read_image(png_structrp png_ptr) |
| { |
| png_debug(1, "in png_start_read_image"); |
| |
| if (png_ptr != NULL) |
| { |
| if ((png_ptr->flags & PNG_FLAG_ROW_INIT) == 0) |
| png_read_start_row(png_ptr); |
| |
| /* New in 1.6.0 this avoids the bug of doing the initializations twice */ |
| else |
| png_app_error(png_ptr, |
| "png_start_read_image/png_read_update_info: duplicate call"); |
| } |
| } |
| #endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ |
| |
| #ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| void PNGAPI |
| png_read_row(png_structrp png_ptr, png_bytep row, png_bytep dsp_row) |
| { |
| png_row_info row_info; |
| |
| if (png_ptr == NULL) |
| return; |
| |
| png_debug2(1, "in png_read_row (row %lu, pass %d)", |
| (unsigned long)png_ptr->row_number, png_ptr->pass); |
| |
| /* png_read_start_row sets the information (in particular iwidth) for this |
| * interlace pass. |
| */ |
| if (!(png_ptr->flags & PNG_FLAG_ROW_INIT)) |
| png_read_start_row(png_ptr); |
| |
| /* 1.5.6: row_info moved out of png_struct to a local here. */ |
| row_info.width = png_ptr->iwidth; /* NOTE: width of current interlaced row */ |
| row_info.color_type = png_ptr->color_type; |
| row_info.bit_depth = png_ptr->bit_depth; |
| row_info.channels = png_ptr->channels; |
| row_info.pixel_depth = png_ptr->pixel_depth; |
| row_info.rowbytes = PNG_ROWBYTES(row_info.pixel_depth, row_info.width); |
| |
| if (png_ptr->row_number == 0 && png_ptr->pass == 0) |
| { |
| /* Check for transforms that have been set but were defined out */ |
| #if defined(PNG_WRITE_INVERT_SUPPORTED) && !defined(PNG_READ_INVERT_SUPPORTED) |
| if (png_ptr->transformations & PNG_INVERT_MONO) |
| png_warning(png_ptr, "PNG_READ_INVERT_SUPPORTED is not defined"); |
| #endif |
| |
| #if defined(PNG_WRITE_FILLER_SUPPORTED) && !defined(PNG_READ_FILLER_SUPPORTED) |
| if (png_ptr->transformations & PNG_FILLER) |
| png_warning(png_ptr, "PNG_READ_FILLER_SUPPORTED is not defined"); |
| #endif |
| |
| #if defined(PNG_WRITE_PACKSWAP_SUPPORTED) && \ |
| !defined(PNG_READ_PACKSWAP_SUPPORTED) |
| if (png_ptr->transformations & PNG_PACKSWAP) |
| png_warning(png_ptr, "PNG_READ_PACKSWAP_SUPPORTED is not defined"); |
| #endif |
| |
| #if defined(PNG_WRITE_PACK_SUPPORTED) && !defined(PNG_READ_PACK_SUPPORTED) |
| if (png_ptr->transformations & PNG_PACK) |
| png_warning(png_ptr, "PNG_READ_PACK_SUPPORTED is not defined"); |
| #endif |
| |
| #if defined(PNG_WRITE_SHIFT_SUPPORTED) && !defined(PNG_READ_SHIFT_SUPPORTED) |
| if (png_ptr->transformations & PNG_SHIFT) |
| png_warning(png_ptr, "PNG_READ_SHIFT_SUPPORTED is not defined"); |
| #endif |
| |
| #if defined(PNG_WRITE_BGR_SUPPORTED) && !defined(PNG_READ_BGR_SUPPORTED) |
| if (png_ptr->transformations & PNG_BGR) |
| png_warning(png_ptr, "PNG_READ_BGR_SUPPORTED is not defined"); |
| #endif |
| |
| #if defined(PNG_WRITE_SWAP_SUPPORTED) && !defined(PNG_READ_SWAP_SUPPORTED) |
| if (png_ptr->transformations & PNG_SWAP_BYTES) |
| png_warning(png_ptr, "PNG_READ_SWAP_SUPPORTED is not defined"); |
| #endif |
| } |
| |
| #ifdef PNG_READ_INTERLACING_SUPPORTED |
| /* If interlaced and we do not need a new row, combine row and return. |
| * Notice that the pixels we have from previous rows have been transformed |
| * already; we can only combine like with like (transformed or |
| * untransformed) and, because of the libpng API for interlaced images, this |
| * means we must transform before de-interlacing. |
| */ |
| if (png_ptr->interlaced && (png_ptr->transformations & PNG_INTERLACE)) |
| { |
| switch (png_ptr->pass) |
| { |
| case 0: |
| if (png_ptr->row_number & 0x07) |
| { |
| if (dsp_row != NULL) |
| png_combine_row(png_ptr, dsp_row, 1/*display*/); |
| png_read_finish_row(png_ptr); |
| return; |
| } |
| break; |
| |
| case 1: |
| if ((png_ptr->row_number & 0x07) || png_ptr->width < 5) |
| { |
| if (dsp_row != NULL) |
| png_combine_row(png_ptr, dsp_row, 1/*display*/); |
| |
| png_read_finish_row(png_ptr); |
| return; |
| } |
| break; |
| |
| case 2: |
| if ((png_ptr->row_number & 0x07) != 4) |
| { |
| if (dsp_row != NULL && (png_ptr->row_number & 4)) |
| png_combine_row(png_ptr, dsp_row, 1/*display*/); |
| |
| png_read_finish_row(png_ptr); |
| return; |
| } |
| break; |
| |
| case 3: |
| if ((png_ptr->row_number & 3) || png_ptr->width < 3) |
| { |
| if (dsp_row != NULL) |
| png_combine_row(png_ptr, dsp_row, 1/*display*/); |
| |
| png_read_finish_row(png_ptr); |
| return; |
| } |
| break; |
| |
| case 4: |
| if ((png_ptr->row_number & 3) != 2) |
| { |
| if (dsp_row != NULL && (png_ptr->row_number & 2)) |
| png_combine_row(png_ptr, dsp_row, 1/*display*/); |
| |
| png_read_finish_row(png_ptr); |
| return; |
| } |
| break; |
| |
| case 5: |
| if ((png_ptr->row_number & 1) || png_ptr->width < 2) |
| { |
| if (dsp_row != NULL) |
| png_combine_row(png_ptr, dsp_row, 1/*display*/); |
| |
| png_read_finish_row(png_ptr); |
| return; |
| } |
| break; |
| |
| default: |
| case 6: |
| if (!(png_ptr->row_number & 1)) |
| { |
| png_read_finish_row(png_ptr); |
| return; |
| } |
| break; |
| } |
| } |
| #endif |
| |
| if (!(png_ptr->mode & PNG_HAVE_IDAT)) |
| png_error(png_ptr, "Invalid attempt to read row data"); |
| |
| /* Fill the row with IDAT data: */ |
| png_read_IDAT_data(png_ptr, png_ptr->row_buf, row_info.rowbytes + 1); |
| |
| if (png_ptr->row_buf[0] > PNG_FILTER_VALUE_NONE) |
| { |
| if (png_ptr->row_buf[0] < PNG_FILTER_VALUE_LAST) |
| png_read_filter_row(png_ptr, &row_info, png_ptr->row_buf + 1, |
| png_ptr->prev_row + 1, png_ptr->row_buf[0]); |
| else |
| png_error(png_ptr, "bad adaptive filter value"); |
| } |
| |
| /* libpng 1.5.6: the following line was copying png_ptr->rowbytes before |
| * 1.5.6, while the buffer really is this big in current versions of libpng |
| * it may not be in the future, so this was changed just to copy the |
| * interlaced count: |
| */ |
| memcpy(png_ptr->prev_row, png_ptr->row_buf, row_info.rowbytes + 1); |
| |
| #ifdef PNG_MNG_FEATURES_SUPPORTED |
| if ((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) && |
| (png_ptr->filter_type == PNG_INTRAPIXEL_DIFFERENCING)) |
| { |
| /* Intrapixel differencing */ |
| png_do_read_intrapixel(&row_info, png_ptr->row_buf + 1); |
| } |
| #endif |
| |
| |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| if (png_ptr->transformations) |
| png_do_read_transformations(png_ptr, &row_info); |
| #endif |
| |
| /* The transformed pixel depth should match the depth now in row_info. */ |
| if (png_ptr->transformed_pixel_depth == 0) |
| { |
| png_ptr->transformed_pixel_depth = row_info.pixel_depth; |
| if (row_info.pixel_depth > png_ptr->maximum_pixel_depth) |
| png_error(png_ptr, "sequential row overflow"); |
| } |
| |
| else if (png_ptr->transformed_pixel_depth != row_info.pixel_depth) |
| png_error(png_ptr, "internal sequential row size calculation error"); |
| |
| #ifdef PNG_READ_INTERLACING_SUPPORTED |
| /* Blow up interlaced rows to full size */ |
| if (png_ptr->interlaced && |
| (png_ptr->transformations & PNG_INTERLACE)) |
| { |
| if (png_ptr->pass < 6) |
| png_do_read_interlace(&row_info, png_ptr->row_buf + 1, png_ptr->pass, |
| png_ptr->transformations); |
| |
| if (dsp_row != NULL) |
| png_combine_row(png_ptr, dsp_row, 1/*display*/); |
| |
| if (row != NULL) |
| png_combine_row(png_ptr, row, 0/*row*/); |
| } |
| |
| else |
| #endif |
| { |
| if (row != NULL) |
| png_combine_row(png_ptr, row, -1/*ignored*/); |
| |
| if (dsp_row != NULL) |
| png_combine_row(png_ptr, dsp_row, -1/*ignored*/); |
| } |
| png_read_finish_row(png_ptr); |
| |
| if (png_ptr->read_row_fn != NULL) |
| (*(png_ptr->read_row_fn))(png_ptr, png_ptr->row_number, png_ptr->pass); |
| |
| } |
| #endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ |
| |
| #ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| /* Read one or more rows of image data. If the image is interlaced, |
| * and png_set_interlace_handling() has been called, the rows need to |
| * contain the contents of the rows from the previous pass. If the |
| * image has alpha or transparency, and png_handle_alpha()[*] has been |
| * called, the rows contents must be initialized to the contents of the |
| * screen. |
| * |
| * "row" holds the actual image, and pixels are placed in it |
| * as they arrive. If the image is displayed after each pass, it will |
| * appear to "sparkle" in. "display_row" can be used to display a |
| * "chunky" progressive image, with finer detail added as it becomes |
| * available. If you do not want this "chunky" display, you may pass |
| * NULL for display_row. If you do not want the sparkle display, and |
| * you have not called png_handle_alpha(), you may pass NULL for rows. |
| * If you have called png_handle_alpha(), and the image has either an |
| * alpha channel or a transparency chunk, you must provide a buffer for |
| * rows. In this case, you do not have to provide a display_row buffer |
| * also, but you may. If the image is not interlaced, or if you have |
| * not called png_set_interlace_handling(), the display_row buffer will |
| * be ignored, so pass NULL to it. |
| * |
| * [*] png_handle_alpha() does not exist yet, as of this version of libpng |
| */ |
| |
| void PNGAPI |
| png_read_rows(png_structrp png_ptr, png_bytepp row, |
| png_bytepp display_row, png_uint_32 num_rows) |
| { |
| png_uint_32 i; |
| png_bytepp rp; |
| png_bytepp dp; |
| |
| png_debug(1, "in png_read_rows"); |
| |
| if (png_ptr == NULL) |
| return; |
| |
| rp = row; |
| dp = display_row; |
| if (rp != NULL && dp != NULL) |
| for (i = 0; i < num_rows; i++) |
| { |
| png_bytep rptr = *rp++; |
| png_bytep dptr = *dp++; |
| |
| png_read_row(png_ptr, rptr, dptr); |
| } |
| |
| else if (rp != NULL) |
| for (i = 0; i < num_rows; i++) |
| { |
| png_bytep rptr = *rp; |
| png_read_row(png_ptr, rptr, NULL); |
| rp++; |
| } |
| |
| else if (dp != NULL) |
| for (i = 0; i < num_rows; i++) |
| { |
| png_bytep dptr = *dp; |
| png_read_row(png_ptr, NULL, dptr); |
| dp++; |
| } |
| } |
| #endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ |
| |
| #ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| /* Read the entire image. If the image has an alpha channel or a tRNS |
| * chunk, and you have called png_handle_alpha()[*], you will need to |
| * initialize the image to the current image that PNG will be overlaying. |
| * We set the num_rows again here, in case it was incorrectly set in |
| * png_read_start_row() by a call to png_read_update_info() or |
| * png_start_read_image() if png_set_interlace_handling() wasn't called |
| * prior to either of these functions like it should have been. You can |
| * only call this function once. If you desire to have an image for |
| * each pass of a interlaced image, use png_read_rows() instead. |
| * |
| * [*] png_handle_alpha() does not exist yet, as of this version of libpng |
| */ |
| void PNGAPI |
| png_read_image(png_structrp png_ptr, png_bytepp image) |
| { |
| png_uint_32 i, image_height; |
| int pass, j; |
| png_bytepp rp; |
| |
| png_debug(1, "in png_read_image"); |
| |
| if (png_ptr == NULL) |
| return; |
| |
| #ifdef PNG_READ_INTERLACING_SUPPORTED |
| if (!(png_ptr->flags & PNG_FLAG_ROW_INIT)) |
| { |
| pass = png_set_interlace_handling(png_ptr); |
| /* And make sure transforms are initialized. */ |
| png_start_read_image(png_ptr); |
| } |
| else |
| { |
| if (png_ptr->interlaced && !(png_ptr->transformations & PNG_INTERLACE)) |
| { |
| /* Caller called png_start_read_image or png_read_update_info without |
| * first turning on the PNG_INTERLACE transform. We can fix this here, |
| * but the caller should do it! |
| */ |
| png_warning(png_ptr, "Interlace handling should be turned on when " |
| "using png_read_image"); |
| /* Make sure this is set correctly */ |
| png_ptr->num_rows = png_ptr->height; |
| } |
| |
| /* Obtain the pass number, which also turns on the PNG_INTERLACE flag in |
| * the above error case. |
| */ |
| pass = png_set_interlace_handling(png_ptr); |
| } |
| #else |
| if (png_ptr->interlaced) |
| png_error(png_ptr, |
| "Cannot read interlaced image -- interlace handler disabled"); |
| |
| pass = 1; |
| #endif |
| |
| image_height=png_ptr->height; |
| |
| for (j = 0; j < pass; j++) |
| { |
| rp = image; |
| for (i = 0; i < image_height; i++) |
| { |
| png_read_row(png_ptr, *rp, NULL); |
| rp++; |
| } |
| } |
| } |
| #endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ |
| |
| #ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| /* Read the end of the PNG file. Will not read past the end of the |
| * file, will verify the end is accurate, and will read any comments |
| * or time information at the end of the file, if info is not NULL. |
| */ |
| void PNGAPI |
| png_read_end(png_structrp png_ptr, png_inforp info_ptr) |
| { |
| #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED |
| int keep; |
| #endif |
| |
| png_debug(1, "in png_read_end"); |
| |
| if (png_ptr == NULL) |
| return; |
| |
| /* If png_read_end is called in the middle of reading the rows there may |
| * still be pending IDAT data and an owned zstream. Deal with this here. |
| */ |
| #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED |
| if (!png_chunk_unknown_handling(png_ptr, png_IDAT)) |
| #endif |
| png_read_finish_IDAT(png_ptr); |
| |
| #ifdef PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED |
| /* Report invalid palette index; added at libng-1.5.10 */ |
| if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE && |
| png_ptr->num_palette_max > png_ptr->num_palette) |
| png_benign_error(png_ptr, "Read palette index exceeding num_palette"); |
| #endif |
| |
| do |
| { |
| png_uint_32 length = png_read_chunk_header(png_ptr); |
| png_uint_32 chunk_name = png_ptr->chunk_name; |
| |
| if (chunk_name == png_IHDR) |
| png_handle_IHDR(png_ptr, info_ptr, length); |
| |
| else if (chunk_name == png_IEND) |
| png_handle_IEND(png_ptr, info_ptr, length); |
| |
| #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED |
| else if ((keep = png_chunk_unknown_handling(png_ptr, chunk_name)) != 0) |
| { |
| if (chunk_name == png_IDAT) |
| { |
| if ((length > 0) || (png_ptr->mode & PNG_HAVE_CHUNK_AFTER_IDAT)) |
| png_benign_error(png_ptr, "Too many IDATs found"); |
| } |
| png_handle_unknown(png_ptr, info_ptr, length, keep); |
| if (chunk_name == png_PLTE) |
| png_ptr->mode |= PNG_HAVE_PLTE; |
| } |
| #endif |
| |
| else if (chunk_name == png_IDAT) |
| { |
| /* Zero length IDATs are legal after the last IDAT has been |
| * read, but not after other chunks have been read. |
| */ |
| if ((length > 0) || (png_ptr->mode & PNG_HAVE_CHUNK_AFTER_IDAT)) |
| png_benign_error(png_ptr, "Too many IDATs found"); |
| |
| png_crc_finish(png_ptr, length); |
| } |
| else if (chunk_name == png_PLTE) |
| png_handle_PLTE(png_ptr, info_ptr, length); |
| |
| #ifdef PNG_READ_bKGD_SUPPORTED |
| else if (chunk_name == png_bKGD) |
| png_handle_bKGD(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_cHRM_SUPPORTED |
| else if (chunk_name == png_cHRM) |
| png_handle_cHRM(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_gAMA_SUPPORTED |
| else if (chunk_name == png_gAMA) |
| png_handle_gAMA(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_hIST_SUPPORTED |
| else if (chunk_name == png_hIST) |
| png_handle_hIST(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_oFFs_SUPPORTED |
| else if (chunk_name == png_oFFs) |
| png_handle_oFFs(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_pCAL_SUPPORTED |
| else if (chunk_name == png_pCAL) |
| png_handle_pCAL(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sCAL_SUPPORTED |
| else if (chunk_name == png_sCAL) |
| png_handle_sCAL(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_pHYs_SUPPORTED |
| else if (chunk_name == png_pHYs) |
| png_handle_pHYs(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sBIT_SUPPORTED |
| else if (chunk_name == png_sBIT) |
| png_handle_sBIT(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sRGB_SUPPORTED |
| else if (chunk_name == png_sRGB) |
| png_handle_sRGB(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_iCCP_SUPPORTED |
| else if (chunk_name == png_iCCP) |
| png_handle_iCCP(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_sPLT_SUPPORTED |
| else if (chunk_name == png_sPLT) |
| png_handle_sPLT(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_tEXt_SUPPORTED |
| else if (chunk_name == png_tEXt) |
| png_handle_tEXt(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_tIME_SUPPORTED |
| else if (chunk_name == png_tIME) |
| png_handle_tIME(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_tRNS_SUPPORTED |
| else if (chunk_name == png_tRNS) |
| png_handle_tRNS(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_zTXt_SUPPORTED |
| else if (chunk_name == png_zTXt) |
| png_handle_zTXt(png_ptr, info_ptr, length); |
| #endif |
| |
| #ifdef PNG_READ_iTXt_SUPPORTED |
| else if (chunk_name == png_iTXt) |
| png_handle_iTXt(png_ptr, info_ptr, length); |
| #endif |
| |
| else |
| png_handle_unknown(png_ptr, info_ptr, length, |
| PNG_HANDLE_CHUNK_AS_DEFAULT); |
| } while (!(png_ptr->mode & PNG_HAVE_IEND)); |
| } |
| #endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ |
| |
| /* Free all memory used in the read struct */ |
| static void |
| png_read_destroy(png_structrp png_ptr) |
| { |
| png_debug(1, "in png_read_destroy"); |
| |
| #ifdef PNG_READ_GAMMA_SUPPORTED |
| png_destroy_gamma_table(png_ptr); |
| #endif |
| |
| png_free(png_ptr, png_ptr->big_row_buf); |
| png_free(png_ptr, png_ptr->big_prev_row); |
| png_free(png_ptr, png_ptr->read_buffer); |
| |
| #ifdef PNG_READ_QUANTIZE_SUPPORTED |
| png_free(png_ptr, png_ptr->palette_lookup); |
| png_free(png_ptr, png_ptr->quantize_index); |
| #endif |
| |
| if (png_ptr->free_me & PNG_FREE_PLTE) |
| png_zfree(png_ptr, png_ptr->palette); |
| png_ptr->free_me &= ~PNG_FREE_PLTE; |
| |
| #if defined(PNG_tRNS_SUPPORTED) || \ |
| defined(PNG_READ_EXPAND_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) |
| if (png_ptr->free_me & PNG_FREE_TRNS) |
| png_free(png_ptr, png_ptr->trans_alpha); |
| png_ptr->free_me &= ~PNG_FREE_TRNS; |
| #endif |
| |
| inflateEnd(&png_ptr->zstream); |
| |
| #ifdef PNG_PROGRESSIVE_READ_SUPPORTED |
| png_free(png_ptr, png_ptr->save_buffer); |
| #endif |
| |
| #if (defined PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED) &&\ |
| (defined PNG_READ_UNKNOWN_CHUNKS_SUPPORTED) |
| png_free(png_ptr, png_ptr->unknown_chunk.data); |
| #endif |
| |
| #ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED |
| png_free(png_ptr, png_ptr->chunk_list); |
| #endif |
| |
| /* NOTE: the 'setjmp' buffer may still be allocated and the memory and error |
| * callbacks are still set at this point. They are required to complete the |
| * destruction of the png_struct itself. |
| */ |
| } |
| |
| /* Free all memory used by the read */ |
| void PNGAPI |
| png_destroy_read_struct(png_structpp png_ptr_ptr, png_infopp info_ptr_ptr, |
| png_infopp end_info_ptr_ptr) |
| { |
| png_structrp png_ptr = NULL; |
| |
| png_debug(1, "in png_destroy_read_struct"); |
| |
| if (png_ptr_ptr != NULL) |
| png_ptr = *png_ptr_ptr; |
| |
| if (png_ptr == NULL) |
| return; |
| |
| /* libpng 1.6.0: use the API to destroy info structs to ensure consistent |
| * behavior. Prior to 1.6.0 libpng did extra 'info' destruction in this API. |
| * The extra was, apparently, unnecessary yet this hides memory leak bugs. |
| */ |
| png_destroy_info_struct(png_ptr, end_info_ptr_ptr); |
| png_destroy_info_struct(png_ptr, info_ptr_ptr); |
| |
| *png_ptr_ptr = NULL; |
| png_read_destroy(png_ptr); |
| png_destroy_png_struct(png_ptr); |
| } |
| |
| void PNGAPI |
| png_set_read_status_fn(png_structrp png_ptr, png_read_status_ptr read_row_fn) |
| { |
| if (png_ptr == NULL) |
| return; |
| |
| png_ptr->read_row_fn = read_row_fn; |
| } |
| |
| |
| #ifdef PNG_SEQUENTIAL_READ_SUPPORTED |
| #ifdef PNG_INFO_IMAGE_SUPPORTED |
| void PNGAPI |
| png_read_png(png_structrp png_ptr, png_inforp info_ptr, |
| int transforms, |
| voidp params) |
| { |
| int row; |
| |
| if (png_ptr == NULL || info_ptr == NULL) |
| return; |
| |
| /* png_read_info() gives us all of the information from the |
| * PNG file before the first IDAT (image data chunk). |
| */ |
| png_read_info(png_ptr, info_ptr); |
| if (info_ptr->height > PNG_UINT_32_MAX/(sizeof (png_bytep))) |
| png_error(png_ptr, "Image is too high to process with png_read_png()"); |
| |
| /* -------------- image transformations start here ------------------- */ |
| |
| #ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED |
| /* Tell libpng to strip 16-bit/color files down to 8 bits per color. |
| */ |
| if (transforms & PNG_TRANSFORM_SCALE_16) |
| { |
| /* Added at libpng-1.5.4. "strip_16" produces the same result that it |
| * did in earlier versions, while "scale_16" is now more accurate. |
| */ |
| png_set_scale_16(png_ptr); |
| } |
| #endif |
| |
| #ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED |
| /* If both SCALE and STRIP are required pngrtran will effectively cancel the |
| * latter by doing SCALE first. This is ok and allows apps not to check for |
| * which is supported to get the right answer. |
| */ |
| if (transforms & PNG_TRANSFORM_STRIP_16) |
| png_set_strip_16(png_ptr); |
| #endif |
| |
| #ifdef PNG_READ_STRIP_ALPHA_SUPPORTED |
| /* Strip alpha bytes from the input data without combining with |
| * the background (not recommended). |
| */ |
| if (transforms & PNG_TRANSFORM_STRIP_ALPHA) |
| png_set_strip_alpha(png_ptr); |
| #endif |
| |
| #if defined(PNG_READ_PACK_SUPPORTED) && !defined(PNG_READ_EXPAND_SUPPORTED) |
| /* Extract multiple pixels with bit depths of 1, 2, or 4 from a single |
| * byte into separate bytes (useful for paletted and grayscale images). |
| */ |
| if (transforms & PNG_TRANSFORM_PACKING) |
| png_set_packing(png_ptr); |
| #endif |
| |
| #ifdef PNG_READ_PACKSWAP_SUPPORTED |
| /* Change the order of packed pixels to least significant bit first |
| * (not useful if you are using png_set_packing). |
| */ |
| if (transforms & PNG_TRANSFORM_PACKSWAP) |
| png_set_packswap(png_ptr); |
| #endif |
| |
| #ifdef PNG_READ_EXPAND_SUPPORTED |
| /* Expand paletted colors into true RGB triplets |
| * Expand grayscale images to full 8 bits from 1, 2, or 4 bits/pixel |
| * Expand paletted or RGB images with transparency to full alpha |
| * channels so the data will be available as RGBA quartets. |
| */ |
| if (transforms & PNG_TRANSFORM_EXPAND) |
| if ((png_ptr->bit_depth < 8) || |
| (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) || |
| (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS))) |
| png_set_expand(png_ptr); |
| #endif |
| |
| /* We don't handle background color or gamma transformation or quantizing. |
| */ |
| |
| #ifdef PNG_READ_INVERT_SUPPORTED |
| /* Invert monochrome files to have 0 as white and 1 as black |
| */ |
| if (transforms & PNG_TRANSFORM_INVERT_MONO) |
| png_set_invert_mono(png_ptr); |
| #endif |
| |
| #ifdef PNG_READ_SHIFT_SUPPORTED |
| /* If you want to shift the pixel values from the range [0,255] or |
| * [0,65535] to the original [0,7] or [0,31], or whatever range the |
| * colors were originally in: |
| */ |
| if ((transforms & PNG_TRANSFORM_SHIFT) |
| && png_get_valid(png_ptr, info_ptr, PNG_INFO_sBIT)) |
| { |
| png_color_8p sig_bit; |
| |
| png_get_sBIT(png_ptr, info_ptr, &sig_bit); |
| png_set_shift(png_ptr, sig_bit); |
| } |
| #endif |
| |
| #ifdef PNG_READ_BGR_SUPPORTED |
| /* Flip the RGB pixels to BGR (or RGBA to BGRA) */ |
| if (transforms & PNG_TRANSFORM_BGR) |
| png_set_bgr(png_ptr); |
| #endif |
| |
| #ifdef PNG_READ_SWAP_ALPHA_SUPPORTED |
| /* Swap the RGBA or GA data to ARGB or AG (or BGRA to ABGR) */ |
| if (transforms & PNG_TRANSFORM_SWAP_ALPHA) |
| png_set_swap_alpha(png_ptr); |
| #endif |
| |
| #ifdef PNG_READ_SWAP_SUPPORTED |
| /* Swap bytes of 16-bit files to least significant byte first */ |
| if (transforms & PNG_TRANSFORM_SWAP_ENDIAN) |
| png_set_swap(png_ptr); |
| #endif |
| |
| /* Added at libpng-1.2.41 */ |
| #ifdef PNG_READ_INVERT_ALPHA_SUPPORTED |
| /* Invert the alpha channel from opacity to transparency */ |
| if (transforms & PNG_TRANSFORM_INVERT_ALPHA) |
| png_set_invert_alpha(png_ptr); |
| #endif |
| |
| /* Added at libpng-1.2.41 */ |
| #ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED |
| /* Expand grayscale image to RGB */ |
| if (transforms & PNG_TRANSFORM_GRAY_TO_RGB) |
| png_set_gray_to_rgb(png_ptr); |
| #endif |
| |
| /* Added at libpng-1.5.4 */ |
| #ifdef PNG_READ_EXPAND_16_SUPPORTED |
| if (transforms & PNG_TRANSFORM_EXPAND_16) |
| png_set_expand_16(png_ptr); |
| #endif |
| |
| /* We don't handle adding filler bytes */ |
| |
| /* We use png_read_image and rely on that for interlace handling, but we also |
| * call png_read_update_info therefore must turn on interlace handling now: |
| */ |
| (void)png_set_interlace_handling(png_ptr); |
| |
| /* Optional call to gamma correct and add the background to the palette |
| * and update info structure. REQUIRED if you are expecting libpng to |
| * update the palette for you (i.e., you selected such a transform above). |
| */ |
| png_read_update_info(png_ptr, info_ptr); |
| |
| /* -------------- image transformations end here ------------------- */ |
| |
| png_free_data(png_ptr, info_ptr, PNG_FREE_ROWS, 0); |
| if (info_ptr->row_pointers == NULL) |
| { |
| png_uint_32 iptr; |
| |
| info_ptr->row_pointers = (png_bytepp)png_malloc(png_ptr, |
| info_ptr->height * (sizeof (png_bytep))); |
| for (iptr=0; iptr<info_ptr->height; iptr++) |
| info_ptr->row_pointers[iptr] = NULL; |
| |
| info_ptr->free_me |= PNG_FREE_ROWS; |
| |
| for (row = 0; row < (int)info_ptr->height; row++) |
| info_ptr->row_pointers[row] = (png_bytep)png_malloc(png_ptr, |
| png_get_rowbytes(png_ptr, info_ptr)); |
| } |
| |
| png_read_image(png_ptr, info_ptr->row_pointers); |
| info_ptr->valid |= PNG_INFO_IDAT; |
| |
| /* Read rest of file, and get additional chunks in info_ptr - REQUIRED */ |
| png_read_end(png_ptr, info_ptr); |
| |
| PNG_UNUSED(transforms) /* Quiet compiler warnings */ |
| PNG_UNUSED(params) |
| |
| } |
| #endif /* PNG_INFO_IMAGE_SUPPORTED */ |
| #endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ |
| |
| #ifdef PNG_SIMPLIFIED_READ_SUPPORTED |
| /* SIMPLIFIED READ |
| * |
| * This code currently relies on the sequential reader, though it could easily |
| * be made to work with the progressive one. |
| */ |
| /* Arguments to png_image_finish_read: */ |
| |
| /* Encoding of PNG data (used by the color-map code) */ |
| /* TODO: change these, dang, ANSI-C reserves the 'E' namespace. */ |
| # define E_NOTSET 0 /* File encoding not yet known */ |
| # define E_sRGB 1 /* 8-bit encoded to sRGB gamma */ |
| # define E_LINEAR 2 /* 16-bit linear: not encoded, NOT pre-multiplied! */ |
| # define E_FILE 3 /* 8-bit encoded to file gamma, not sRGB or linear */ |
| # define E_LINEAR8 4 /* 8-bit linear: only from a file value */ |
| |
| /* Color-map processing: after libpng has run on the PNG image further |
| * processing may be needed to conver the data to color-map indicies. |
| */ |
| #define PNG_CMAP_NONE 0 |
| #define PNG_CMAP_GA 1 /* Process GA data to a color-map with alpha */ |
| #define PNG_CMAP_TRANS 2 /* Process GA data to a background index */ |
| #define PNG_CMAP_RGB 3 /* Process RGB data */ |
| #define PNG_CMAP_RGB_ALPHA 4 /* Process RGBA data */ |
| |
| /* The following document where the background is for each processing case. */ |
| #define PNG_CMAP_NONE_BACKGROUND 256 |
| #define PNG_CMAP_GA_BACKGROUND 231 |
| #define PNG_CMAP_TRANS_BACKGROUND 254 |
| #define PNG_CMAP_RGB_BACKGROUND 256 |
| #define PNG_CMAP_RGB_ALPHA_BACKGROUND 216 |
| |
| typedef struct |
| { |
| /* Arguments: */ |
| png_imagep image; |
| png_voidp buffer; |
| png_int_32 row_stride; |
| png_voidp colormap; |
| png_const_colorp background; |
| /* Local variables: */ |
| png_voidp local_row; |
| png_voidp first_row; |
| ptrdiff_t row_bytes; /* step between rows */ |
| int file_encoding; /* E_ values above */ |
| png_fixed_point gamma_to_linear; /* For E_FILE, reciprocal of gamma */ |
| int colormap_processing; /* PNG_CMAP_ values above */ |
| } png_image_read_control; |
| |
| /* Do all the *safe* initialization - 'safe' means that png_error won't be |
| * called, so setting up the jmp_buf is not required. This means that anything |
| * called from here must *not* call png_malloc - it has to call png_malloc_warn |
| * instead so that control is returned safely back to this routine. |
| */ |
| static int |
| png_image_read_init(png_imagep image) |
| { |
| if (image->opaque == NULL) |
| { |
| png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, image, |
| png_safe_error, png_safe_warning); |
| |
| /* And set the rest of the structure to NULL to ensure that the various |
| * fields are consistent. |
| */ |
| memset(image, 0, (sizeof *image)); |
| image->version = PNG_IMAGE_VERSION; |
| |
| if (png_ptr != NULL) |
| { |
| png_infop info_ptr = png_create_info_struct(png_ptr); |
| |
| if (info_ptr != NULL) |
| { |
| png_controlp control = png_voidcast(png_controlp, |
| png_malloc_warn(png_ptr, (sizeof *control))); |
| |
| if (control != NULL) |
| { |
| memset(control, 0, (sizeof *control)); |
| |
| control->png_ptr = png_ptr; |
| control->info_ptr = info_ptr; |
| control->for_write = 0; |
| |
| image->opaque = control; |
| return 1; |
| } |
| |
| /* Error clean up */ |
| png_destroy_info_struct(png_ptr, &info_ptr); |
| } |
| |
| png_destroy_read_struct(&png_ptr, NULL, NULL); |
| } |
| |
| return png_image_error(image, "png_image_read: out of memory"); |
| } |
| |
| return png_image_error(image, "png_image_read: opaque pointer not NULL"); |
| } |
| |
| /* Utility to find the base format of a PNG file from a png_struct. */ |
| static png_uint_32 |
| png_image_format(png_structrp png_ptr) |
| { |
| png_uint_32 format = 0; |
| |
| if (png_ptr->color_type & PNG_COLOR_MASK_COLOR) |
| format |= PNG_FORMAT_FLAG_COLOR; |
| |
| if (png_ptr->color_type & PNG_COLOR_MASK_ALPHA) |
| format |= PNG_FORMAT_FLAG_ALPHA; |
| |
| /* Use png_ptr here, not info_ptr, because by examination png_handle_tRNS |
| * sets the png_struct fields; that's all we are interested in here. The |
| * precise interaction with an app call to png_set_tRNS and PNG file reading |
| * is unclear. |
| */ |
| else if (png_ptr->num_trans > 0) |
| format |= PNG_FORMAT_FLAG_ALPHA; |
| |
| if (png_ptr->bit_depth == 16) |
| format |= PNG_FORMAT_FLAG_LINEAR; |
| |
| if (png_ptr->color_type & PNG_COLOR_MASK_PALETTE) |
| format |= PNG_FORMAT_FLAG_COLORMAP; |
| |
| return format; |
| } |
| |
| /* Is the given gamma significantly different from sRGB? The test is the same |
| * one used in pngrtran.c when deciding whether to do gamma correction. The |
| * arithmetic optimizes the division by using the fact that the inverse of the |
| * file sRGB gamma is 2.2 |
| */ |
| static int |
| png_gamma_not_sRGB(png_fixed_point g) |
| { |
| if (g < PNG_FP_1) |
| { |
| /* An uninitialized gamma is assumed to be sRGB for the simplified API. */ |
| if (g == 0) |
| return 0; |
| |
| return png_gamma_significant((g * 11 + 2)/5 /* i.e. *2.2, rounded */); |
| } |
| |
| return 1; |
| } |
| |
| /* Do the main body of a 'png_image_begin_read' function; read the PNG file |
| * header and fill in all the information. This is executed in a safe context, |
| * unlike the init routine above. |
| */ |
| static int |
| png_image_read_header(png_voidp argument) |
| { |
| png_imagep image = png_voidcast(png_imagep, argument); |
| png_structrp png_ptr = image->opaque->png_ptr; |
| png_inforp info_ptr = image->opaque->info_ptr; |
| |
| png_set_benign_errors(png_ptr, 1/*warn*/); |
| png_read_info(png_ptr, info_ptr); |
| |
| /* Do this the fast way; just read directly out of png_struct. */ |
| image->width = png_ptr->width; |
| image->height = png_ptr->height; |
| |
| { |
| png_uint_32 format = png_image_format(png_ptr); |
| |
| image->format = format; |
| |
| #ifdef PNG_COLORSPACE_SUPPORTED |
| /* Does the colorspace match sRGB? If there is no color endpoint |
| * (colorant) information assume yes, otherwise require the |
| * 'ENDPOINTS_MATCHE_sRGB' colorspace flag to have been set. If the |
| * colorspace has been determined to be invalid ignore it. |
| */ |
| if ((format & PNG_FORMAT_FLAG_COLOR) != 0 && ((png_ptr->colorspace.flags |
| & (PNG_COLORSPACE_HAVE_ENDPOINTS|PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB| |
| PNG_COLORSPACE_INVALID)) == PNG_COLORSPACE_HAVE_ENDPOINTS)) |
| image->flags |= PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB; |
| #endif |
| } |
| |
| /* We need the maximum number of entries regardless of the format the |
| * application sets here. |
| */ |
| { |
| png_uint_32 cmap_entries; |
| |
| switch (png_ptr->color_type) |
| { |
| case PNG_COLOR_TYPE_GRAY: |
| cmap_entries = 1U << png_ptr->bit_depth; |
| break; |
| |
| case PNG_COLOR_TYPE_PALETTE: |
| cmap_entries = png_ptr->num_palette; |
| break; |
| |
| default: |
| cmap_entries = 256; |
| break; |
| } |
| |
| if (cmap_entries > 256) |
| cmap_entries = 256; |
| |
| image->colormap_entries = cmap_entries; |
| } |
| |
| return 1; |
| } |
| |
| #ifdef PNG_STDIO_SUPPORTED |
| int PNGAPI |
| png_image_begin_read_from_stdio(png_imagep image, FILE* file) |
| { |
| if (image != NULL && image->version == PNG_IMAGE_VERSION) |
| { |
| if (file != NULL) |
| { |
| if (png_image_read_init(image)) |
| { |
| /* This is slightly evil, but png_init_io doesn't do anything other |
| * than this and we haven't changed the standard IO functions so |
| * this saves a 'safe' function. |
| */ |
| image->opaque->png_ptr->io_ptr = file; |
| return png_safe_execute(image, png_image_read_header, image); |
| } |
| } |
| |
| else |
| return png_image_error(image, |
| "png_image_begin_read_from_stdio: invalid argument"); |
| } |
| |
| else if (image != NULL) |
| return png_image_error(image, |
| "png_image_begin_read_from_stdio: incorrect PNG_IMAGE_VERSION"); |
| |
| return 0; |
| } |
| |
| int PNGAPI |
| png_image_begin_read_from_file(png_imagep image, const char *file_name) |
| { |
| if (image != NULL && image->version == PNG_IMAGE_VERSION) |
| { |
| if (file_name != NULL) |
| { |
| FILE *fp = fopen(file_name, "rb"); |
| |
| if (fp != NULL) |
| { |
| if (png_image_read_init(image)) |
| { |
| image->opaque->png_ptr->io_ptr = fp; |
| image->opaque->owned_file = 1; |
| return png_safe_execute(image, png_image_read_header, image); |
| } |
| |
| /* Clean up: just the opened file. */ |
| (void)fclose(fp); |
| } |
| |
| else |
| return png_image_error(image, strerror(errno)); |
| } |
| |
| else |
| return png_image_error(image, |
| "png_image_begin_read_from_file: invalid argument"); |
| } |
| |
| else if (image != NULL) |
| return png_image_error(image, |
| "png_image_begin_read_from_file: incorrect PNG_IMAGE_VERSION"); |
| |
| return 0; |
| } |
| #endif /* PNG_STDIO_SUPPORTED */ |
| |
| static void PNGCBAPI |
| png_image_memory_read(png_structp png_ptr, png_bytep out, png_size_t need) |
| { |
| if (png_ptr != NULL) |
| { |
| png_imagep image = png_voidcast(png_imagep, png_ptr->io_ptr); |
| if (image != NULL) |
| { |
| png_controlp cp = image->opaque; |
| if (cp != NULL) |
| { |
| png_const_bytep memory = cp->memory; |
| png_size_t size = cp->size; |
| |
| if (memory != NULL && size >= need) |
| { |
| memcpy(out, memory, need); |
| cp->memory = memory + need; |
| cp->size = size - need; |
| return; |
| } |
| |
| png_error(png_ptr, "read beyond end of data"); |
| } |
| } |
| |
| png_error(png_ptr, "invalid memory read"); |
| } |
| } |
| |
| int PNGAPI png_image_begin_read_from_memory(png_imagep image, |
| png_const_voidp memory, png_size_t size) |
| { |
| if (image != NULL && image->version == PNG_IMAGE_VERSION) |
| { |
| if (memory != NULL && size > 0) |
| { |
| if (png_image_read_init(image)) |
| { |
| /* Now set the IO functions to read from the memory buffer and |
| * store it into io_ptr. Again do this in-place to avoid calling a |
| * libpng function that requires error handling. |
| */ |
| image->opaque->memory = png_voidcast(png_const_bytep, memory); |
| image->opaque->size = size; |
| image->opaque->png_ptr->io_ptr = image; |
| image->opaque->png_ptr->read_data_fn = png_image_memory_read; |
| |
| return png_safe_execute(image, png_image_read_header, image); |
| } |
| } |
| |
| else |
| return png_image_error(image, |
| "png_image_begin_read_from_memory: invalid argument"); |
| } |
| |
| else if (image != NULL) |
| return png_image_error(image, |
| "png_image_begin_read_from_memory: incorrect PNG_IMAGE_VERSION"); |
| |
| return 0; |
| } |
| |
| /* Utility function to skip chunks that are not used by the simplified image |
| * read functions and an appropriate macro to call it. |
| */ |
| #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED |
| static void |
| png_image_skip_unused_chunks(png_structrp png_ptr) |
| { |
| /* Prepare the reader to ignore all recognized chunks whose data will not |
| * be used, i.e., all chunks recognized by libpng except for those |
| * involved in basic image reading: |
| * |
| * IHDR, PLTE, IDAT, IEND |
| * |
| * Or image data handling: |
| * |
| * tRNS, bKGD, gAMA, cHRM, sRGB, iCCP and sBIT. |
| * |
| * This provides a small performance improvement and eliminates any |
| * potential vulnerability to security problems in the unused chunks. |
| */ |
| { |
| static PNG_CONST png_byte chunks_to_process[] = { |
| 98, 75, 71, 68, '\0', /* bKGD */ |
| 99, 72, 82, 77, '\0', /* cHRM */ |
| 103, 65, 77, 65, '\0', /* gAMA */ |
| 105, 67, 67, 80, '\0', /* iCCP */ |
| 115, 66, 73, 84, '\0', /* sBIT */ |
| 115, 82, 71, 66, '\0', /* sRGB */ |
| }; |
| |
| /* Ignore unknown chunks and all other chunks except for the |
| * IHDR, PLTE, tRNS, IDAT, and IEND chunks. |
| */ |
| png_set_keep_unknown_chunks(png_ptr, PNG_HANDLE_CHUNK_NEVER, |
| NULL, -1); |
| |
| /* But do not ignore image data handling chunks */ |
| png_set_keep_unknown_chunks(png_ptr, PNG_HANDLE_CHUNK_AS_DEFAULT, |
| chunks_to_process, (sizeof chunks_to_process)/5); |
| } |
| } |
| |
| # define PNG_SKIP_CHUNKS(p) png_image_skip_unused_chunks(p) |
| #else |
| # define PNG_SKIP_CHUNKS(p) ((void)0) |
| #endif /* PNG_HANDLE_AS_UNKNOWN_SUPPORTED */ |
| |
| /* The following macro gives the exact rounded answer for all values in the |
| * range 0..255 (it actually divides by 51.2, but the rounding still generates |
| * the correct numbers 0..5 |
| */ |
| #define PNG_DIV51(v8) (((v8) * 5 + 130) >> 8) |
| |
| /* Utility functions to make particular color-maps */ |
| static void |
| set_file_encoding(png_image_read_control *display) |
| { |
| png_fixed_point g = display->image->opaque->png_ptr->colorspace.gamma; |
| if (png_gamma_significant(g)) |
| { |
| if (png_gamma_not_sRGB(g)) |
| { |
| display->file_encoding = E_FILE; |
| display->gamma_to_linear = png_reciprocal(g); |
| } |
| |
| else |
| display->file_encoding = E_sRGB; |
| } |
| |
| else |
| display->file_encoding = E_LINEAR8; |
| } |
| |
| static unsigned int |
| decode_gamma(png_image_read_control *display, png_uint_32 value, int encoding) |
| { |
| if (encoding == E_FILE) /* double check */ |
| encoding = display->file_encoding; |
| |
| if (encoding == E_NOTSET) /* must be the file encoding */ |
| { |
| set_file_encoding(display); |
| encoding = display->file_encoding; |
| } |
| |
| switch (encoding) |
| { |
| case E_FILE: |
| value = png_gamma_16bit_correct(value*257, display->gamma_to_linear); |
| break; |
| |
| case E_sRGB: |
| value = png_sRGB_table[value]; |
| break; |
| |
| case E_LINEAR: |
| break; |
| |
| case E_LINEAR8: |
| value *= 257; |
| break; |
| |
| default: |
| png_error(display->image->opaque->png_ptr, |
| "unexpected encoding (internal error)"); |
| break; |
| } |
| |
| return value; |
| } |
| |
| static png_uint_32 |
| png_colormap_compose(png_image_read_control *display, |
| png_uint_32 foreground, int foreground_encoding, png_uint_32 alpha, |
| png_uint_32 background, int encoding) |
| { |
| /* The file value is composed on the background, the background has the given |
| * encoding and so does the result, the file is encoded with E_FILE and the |
| * file and alpha are 8-bit values. The (output) encoding will always be |
| * E_LINEAR or E_sRGB. |
| */ |
| png_uint_32 f = decode_gamma(display, foreground, foreground_encoding); |
| png_uint_32 b = decode_gamma(display, background, encoding); |
| |
| /* The alpha is always an 8-bit value (it comes from the palette), the value |
| * scaled by 255 is what PNG_sRGB_FROM_LINEAR requires. |
| */ |
| f = f * alpha + b * (255-alpha); |
| |
| if (encoding == E_LINEAR) |
| { |
| /* Scale to 65535; divide by 255, approximately (in fact this is extremely |
| * accurate, it divides by 255.00000005937181414556, with no overflow.) |
| */ |
| f *= 257; /* Now scaled by 65535 */ |
| f += f >> 16; |
| f = (f+32768) >> 16; |
| } |
| |
| else /* E_sRGB */ |
| f = PNG_sRGB_FROM_LINEAR(f); |
| |
| return f; |
| } |
| |
| /* NOTE: E_LINEAR values to this routine must be 16-bit, but E_FILE values must |
| * be 8-bit. |
| */ |
| static void |
| png_create_colormap_entry(png_image_read_control *display, |
| png_uint_32 ip, png_uint_32 red, png_uint_32 green, png_uint_32 blue, |
| png_uint_32 alpha, int encoding) |
| { |
| png_imagep image = display->image; |
| const int output_encoding = (image->format & PNG_FORMAT_FLAG_LINEAR) ? |
| E_LINEAR : E_sRGB; |
| const int convert_to_Y = (image->format & PNG_FORMAT_FLAG_COLOR) == 0 && |
| (red != green || green != blue); |
| |
| if (ip > 255) |
| png_error(image->opaque->png_ptr, "color-map index out of range"); |
| |
| /* Update the cache with whether the file gamma is significantly different |
| * from sRGB. |
| */ |
| if (encoding == E_FILE) |
| { |
| if (display->file_encoding == E_NOTSET) |
| set_file_encoding(display); |
| |
| /* Note that the cached value may be E_FILE too, but if it is then the |
| * gamma_to_linear member has been set. |
| */ |
| encoding = display->file_encoding; |
| } |
| |
| if (encoding == E_FILE) |
| { |
| png_fixed_point g = display->gamma_to_linear; |
| |
| red = png_gamma_16bit_correct(red*257, g); |
| green = png_gamma_16bit_correct(green*257, g); |
| blue = png_gamma_16bit_correct(blue*257, g); |
| |
| if (convert_to_Y || output_encoding == E_LINEAR) |
| { |
| alpha *= 257; |
| encoding = E_LINEAR; |
| } |
| |
| else |
| { |
| red = PNG_sRGB_FROM_LINEAR(red * 255); |
| green = PNG_sRGB_FROM_LINEAR(green * 255); |
| blue = PNG_sRGB_FROM_LINEAR(blue * 255); |
| encoding = E_sRGB; |
| } |
| } |
| |
| else if (encoding == E_LINEAR8) |
| { |
| /* This encoding occurs quite frequently in test cases because PngSuite |
| * includes a gAMA 1.0 chunk with most images. |
| */ |
| red *= 257; |
| green *= 257; |
| blue *= 257; |
| alpha *= 257; |
| encoding = E_LINEAR; |
| } |
| |
| else if (encoding == E_sRGB && (convert_to_Y || output_encoding == E_LINEAR)) |
| { |
| /* The values are 8-bit sRGB values, but must be converted to 16-bit |
| * linear. |
| */ |
| red = png_sRGB_table[red]; |
| green = png_sRGB_table[green]; |
| blue = png_sRGB_table[blue]; |
| alpha *= 257; |
| encoding = E_LINEAR; |
| } |
| |
| /* This is set if the color isn't gray but the output is. */ |
| if (encoding == E_LINEAR) |
| { |
| if (convert_to_Y) |
| { |
| /* NOTE: these values are copied from png_do_rgb_to_gray */ |
| png_uint_32 y = (png_uint_32)6968 * red + (png_uint_32)23434 * green + |
| (png_uint_32)2366 * blue; |
| |
| if (output_encoding == E_LINEAR) |
| y = (y + 16384) >> 15; |
| |
| else |
| { |
| /* y is scaled by 32768, we need it scaled by 255: */ |
| y = (y + 128) >> 8; |
| y *= 255; |
| y = PNG_sRGB_FROM_LINEAR((y + 64) >> 7); |
| encoding = E_sRGB; |
| } |
| |
| blue = red = green = y; |
| } |
| |
| else if (output_encoding == E_sRGB) |
| { |
| red = PNG_sRGB_FROM_LINEAR(red * 255); |
| green = PNG_sRGB_FROM_LINEAR(green * 255); |
| blue = PNG_sRGB_FROM_LINEAR(blue * 255); |
| alpha = PNG_DIV257(alpha); |
| encoding = E_sRGB; |
| } |
| } |
| |
| if (encoding != output_encoding) |
| png_error(image->opaque->png_ptr, "bad encoding (internal error)"); |
| |
| /* Store the value. */ |
| { |
| # ifdef PNG_FORMAT_BGR_SUPPORTED |
| const int afirst = (image->format & PNG_FORMAT_FLAG_AFIRST) != 0 && |
| (image->format & PNG_FORMAT_FLAG_ALPHA) != 0; |
| # else |
| # define afirst 0 |
| # endif |
| # ifdef PNG_FORMAT_BGR_SUPPORTED |
| const int bgr = (image->format & PNG_FORMAT_FLAG_BGR) ? 2 : 0; |
| # else |
| # define bgr 0 |
| # endif |
| |
| if (output_encoding == E_LINEAR) |
| { |
| png_uint_16p entry = png_voidcast(png_uint_16p, display->colormap); |
| |
| entry += ip * PNG_IMAGE_SAMPLE_CHANNELS(image->format); |
| |
| /* The linear 16-bit values must be pre-multiplied by the alpha channel |
| * value, if less than 65535 (this is, effectively, composite on black |
| * if the alpha channel is removed.) |
| */ |
| switch (PNG_IMAGE_SAMPLE_CHANNELS(image->format)) |
| { |
| case 4: |
| entry[afirst ? 0 : 3] = (png_uint_16)alpha; |
| /* FALL THROUGH */ |
| |
| case 3: |
| if (alpha < 65535) |
| { |
| if (alpha > 0) |
| { |
| blue = (blue * alpha + 32767U)/65535U; |
| green = (green * alpha + 32767U)/65535U; |
| red = (red * alpha + 32767U)/65535U; |
| } |
| |
| else |
| red = green = blue = 0; |
| } |
| entry[afirst + (2 ^ bgr)] = (png_uint_16)blue; |
| entry[afirst + 1] = (png_uint_16)green; |
| entry[afirst + bgr] = (png_uint_16)red; |
| break; |
| |
| case 2: |
| entry[1 ^ afirst] = (png_uint_16)alpha; |
| /* FALL THROUGH */ |
| |
| case 1: |
| if (alpha < 65535) |
| { |
| if (alpha > 0) |
| green = (green * alpha + 32767U)/65535U; |
| |
| else |
| green = 0; |
| } |
| entry[afirst] = (png_uint_16)green; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| else /* output encoding is E_sRGB */ |
| { |
| png_bytep entry = png_voidcast(png_bytep, display->colormap); |
| |
| entry += ip * PNG_IMAGE_SAMPLE_CHANNELS(image->format); |
| |
| switch (PNG_IMAGE_SAMPLE_CHANNELS(image->format)) |
| { |
| case 4: |
| entry[afirst ? 0 : 3] = (png_byte)alpha; |
| case 3: |
| entry[afirst + (2 ^ bgr)] = (png_byte)blue; |
| entry[afirst + 1] = (png_byte)green; |
| entry[afirst + bgr] = (png_byte)red; |
| break; |
| |
| case 2: |
| entry[1 ^ afirst] = (png_byte)alpha; |
| case 1: |
| entry[afirst] = (png_byte)green; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| # ifdef afirst |
| # undef afirst |
| # endif |
| # ifdef bgr |
| # undef bgr |
| # endif |
| } |
| } |
| |
| static int |
| make_gray_file_colormap(png_image_read_control *display) |
| { |
| unsigned int i; |
| |
| for (i=0; i<256; ++i) |
| png_create_colormap_entry(display, i, i, i, i, 255, E_FILE); |
| |
| return i; |
| } |
| |
| static int |
| make_gray_colormap(png_image_read_control *display) |
| { |
| unsigned int i; |
| |
| for (i=0; i<256; ++i) |
| png_create_colormap_entry(display, i, i, i, i, 255, E_sRGB); |
| |
| return i; |
| } |
| #define PNG_GRAY_COLORMAP_ENTRIES 256 |
| |
| static int |
| make_ga_colormap(png_image_read_control *display) |
| { |
| unsigned int i, a; |
| |
| /* Alpha is retained, the output will be a color-map with entries |
| * selected by six levels of alpha. One transparent entry, 6 gray |
| * levels for all the intermediate alpha values, leaving 230 entries |
| * for the opaque grays. The color-map entries are the six values |
| * [0..5]*51, the GA processing uses PNG_DIV51(value) to find the |
| * relevant entry. |
| * |
| * if (alpha > 229) // opaque |
| * { |
| * // The 231 entries are selected to make the math below work: |
| * base = 0; |
| * entry = (231 * gray + 128) >> 8; |
| * } |
| * else if (alpha < 26) // transparent |
| * { |
| * base = 231; |
| * entry = 0; |
| * } |
| * else // partially opaque |
| * { |
| * base = 226 + 6 * PNG_DIV51(alpha); |
| * entry = PNG_DIV51(gray); |
| * } |
| */ |
| i = 0; |
| while (i < 231) |
| { |
| unsigned int gray = (i * 256 + 115) / 231; |
| png_create_colormap_entry(display, i++, gray, gray, gray, 255, E_sRGB); |
| } |
| |
| /* 255 is used here for the component values for consistency with the code |
| * that undoes premultiplication in pngwrite.c. |
| */ |
| png_create_colormap_entry(display, i++, 255, 255, 255, 0, E_sRGB); |
| |
| for (a=1; a<5; ++a) |
| { |
| unsigned int g; |
| |
| for (g=0; g<6; ++g) |
| png_create_colormap_entry(display, i++, g*51, g*51, g*51, a*51, |
| E_sRGB); |
| } |
| |
| return i; |
| } |
| |
| #define PNG_GA_COLORMAP_ENTRIES 256 |
| |
| static int |
| make_rgb_colormap(png_image_read_control *display) |
| { |
| unsigned int i, r; |
| |
| /* Build a 6x6x6 opaque RGB cube */ |
| for (i=r=0; r<6; ++r) |
| { |
| unsigned int g; |
| |
| for (g=0; g<6; ++g) |
| { |
| unsigned int b; |
| |
| for (b=0; b<6; ++b) |
| png_create_colormap_entry(display, i++, r*51, g*51, b*51, 255, |
| E_sRGB); |
| } |
| } |
| |
| return i; |
| } |
| |
| #define PNG_RGB_COLORMAP_ENTRIES 216 |
| |
| /* Return a palette index to the above palette given three 8-bit sRGB values. */ |
| #define PNG_RGB_INDEX(r,g,b) \ |
| ((png_byte)(6 * (6 * PNG_DIV51(r) + PNG_DIV51(g)) + PNG_DIV51(b))) |
| |
| static int |
| png_image_read_colormap(png_voidp argument) |
| { |
| png_image_read_control *display = |
| png_voidcast(png_image_read_control*, argument); |
| const png_imagep image = display->image; |
| |
| const png_structrp png_ptr = image->opaque->png_ptr; |
| const png_uint_32 output_format = image->format; |
| const int output_encoding = (output_format & PNG_FORMAT_FLAG_LINEAR) ? |
| E_LINEAR : E_sRGB; |
| |
| unsigned int cmap_entries; |
| unsigned int output_processing; /* Output processing option */ |
| unsigned int data_encoding = E_NOTSET; /* Encoding libpng must produce */ |
| |
| /* Background information; the background color and the index of this color |
| * in the color-map if it exists (else 256). |
| */ |
| unsigned int background_index = 256; |
| png_uint_32 back_r, back_g, back_b; |
| |
| /* Flags to accumulate things that need to be done to the input. */ |
| int expand_tRNS = 0; |
| |
| /* Exclude the NYI feature of compositing onto a color-mapped buffer; it is |
| * very difficult to do, the results look awful, and it is difficult to see |
| * what possible use it is because the application can't control the |
| * color-map. |
| */ |
| if (((png_ptr->color_type & PNG_COLOR_MASK_ALPHA) != 0 || |
| png_ptr->num_trans > 0) /* alpha in input */ && |
| ((output_format & PNG_FORMAT_FLAG_ALPHA) == 0) /* no alpha in output */) |
| { |
| if (output_encoding == E_LINEAR) /* compose on black */ |
| back_b = back_g = back_r = 0; |
| |
| else if (display->background == NULL /* no way to remove it */) |
| png_error(png_ptr, |
| "a background color must be supplied to remove alpha/transparency"); |
| |
| /* Get a copy of the background color (this avoids repeating the checks |
| * below.) The encoding is 8-bit sRGB or 16-bit linear, depending on the |
| * output format. |
| */ |
| else |
| { |
| back_g = display->background->green; |
| if (output_format & PNG_FORMAT_FLAG_COLOR) |
| { |
| back_r = display->background->red; |
| back_b = display->background->blue; |
| } |
| else |
| back_b = back_r = back_g; |
| } |
| } |
| |
| else if (output_encoding == E_LINEAR) |
| back_b = back_r = back_g = 65535; |
| |
| else |
| back_b = back_r = back_g = 255; |
| |
| /* Decide what to do based on the PNG color type of the input data. The |
| * utility function png_create_colormap_entry deals with most aspects of the |
| * output transformations; this code works out how to produce bytes of |
| * color-map entries from the original format. |
| */ |
| switch (png_ptr->color_type) |
| { |
| case PNG_COLOR_TYPE_GRAY: |
| if (png_ptr->bit_depth <= 8) |
| { |
| /* There at most 256 colors in the output, regardless of |
| * transparency. |
| */ |
| unsigned int step, i, val, trans = 256/*ignore*/, back_alpha = 0; |
| |
| cmap_entries = 1U << png_ptr->bit_depth; |
| if (cmap_entries > image->colormap_entries) |
| png_error(png_ptr, "gray[8] color-map: too few entries"); |
| |
| step = 255 / (cmap_entries - 1); |
| output_processing = PNG_CMAP_NONE; |
| |
| /* If there is a tRNS chunk then this either selects a transparent |
| * value or, if the output has no alpha, the background color. |
| */ |
| if (png_ptr->num_trans > 0) |
| { |
| trans = png_ptr->trans_color.gray; |
| |
| if ((output_format & PNG_FORMAT_FLAG_ALPHA) == 0) |
| back_alpha = output_encoding == E_LINEAR ? 65535 : 255; |
| } |
| |
| /* png_create_colormap_entry just takes an RGBA and writes the |
| * corresponding color-map entry using the format from 'image', |
| * including the required conversion to sRGB or linear as |
| * appropriate. The input values are always either sRGB (if the |
| * gamma correction flag is 0) or 0..255 scaled file encoded values |
| * (if the function must gamma correct them). |
| */ |
| for (i=val=0; i<cmap_entries; ++i, val += step) |
| { |
| /* 'i' is a file value. While this will result in duplicated |
| * entries for 8-bit non-sRGB encoded files it is necessary to |
| * have non-gamma corrected values to do tRNS handling. |
| */ |
| if (i != trans) |
| png_create_colormap_entry(display, i, val, val, val, 255, |
| E_FILE/*8-bit with file gamma*/); |
| |
| /* Else this entry is transparent. The colors don't matter if |
| * there is an alpha channel (back_alpha == 0), but it does no |
| * harm to pass them in; the values are not set above so this |
| * passes in white. |
| * |
| * NOTE: this preserves the full precision of the application |
| * supplied background color when it is used. |
| */ |
| else |
| png_create_colormap_entry(display, i, back_r, back_g, back_b, |
| back_alpha, output_encoding); |
| } |
| |
| /* We need libpng to preserve the original encoding. */ |
| data_encoding = E_FILE; |
| |
| /* The rows from libpng, while technically gray values, are now also |
| * color-map indicies; however, they may need to be expanded to 1 |
| * byte per pixel. This is what png_set_packing does (i.e., it |
| * unpacks the bit values into bytes.) |
| */ |
| if (png_ptr->bit_depth < 8) |
| png_set_packing(png_ptr); |
| } |
| |
| else /* bit depth is 16 */ |
| { |
| /* The 16-bit input values can be converted directly to 8-bit gamma |
| * encoded values; however, if a tRNS chunk is present 257 color-map |
| * entries are required. This means that the extra entry requires |
| * special processing; add an alpha channel, sacrifice gray level |
| * 254 and convert transparent (alpha==0) entries to that. |
| * |
| * Use libpng to chop the data to 8 bits. Convert it to sRGB at the |
| * same time to minimize quality loss. If a tRNS chunk is present |
| * this means libpng must handle it too; otherwise it is impossible |
| * to do the exact match on the 16-bit value. |
| * |
| * If the output has no alpha channel *and* the background color is |
| * gray then it is possible to let libpng handle the substitution by |
| * ensuring that the corresponding gray level matches the background |
| * color exactly. |
| */ |
| data_encoding = E_sRGB; |
| |
| if (PNG_GRAY_COLORMAP_ENTRIES > image->colormap_entries) |
| png_error(png_ptr, "gray[16] color-map: too few entries"); |
| |
| cmap_entries = make_gray_colormap(display); |
| |
| if (png_ptr->num_trans > 0) |
| { |
| unsigned int back_alpha; |
| |
| if (output_format & PNG_FORMAT_FLAG_ALPHA) |
| back_alpha = 0; |
| |
| else |
| { |
| if (back_r == back_g && back_g == back_b) |
| { |
| /* Background is gray; no special processing will be |
| * required. |
| */ |
| png_color_16 c; |
| png_uint_32 gray = back_g; |
| |
| if (output_encoding == E_LINEAR) |
| { |
| gray = PNG_sRGB_FROM_LINEAR(gray * 255); |
| |
| /* And make sure the corresponding palette entry |
| * matches. |
| */ |
| png_create_colormap_entry(display, gray, back_g, back_g, |
| back_g, 65535, E_LINEAR); |
| } |
| |
| /* The background passed to libpng, however, must be the |
| * sRGB value. |
| */ |
| c.index = 0; /*unused*/ |
| c.gray = c.red = c.green = c.blue = (png_uint_16)gray; |
| |
| /* NOTE: does this work without expanding tRNS to alpha? |
| * It should be the color->gray case below apparently |
| * doesn't. |
| */ |
| png_set_background_fixed(png_ptr, &c, |
| PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, |
| 0/*gamma: not used*/); |
| |
| output_processing = PNG_CMAP_NONE; |
| break; |
| } |
| |
| back_alpha = output_encoding == E_LINEAR ? 65535 : 255; |
| } |
| |
| /* output_processing means that the libpng-processed row will be |
| * 8-bit GA and it has to be processing to single byte color-map |
| * values. Entry 254 is replaced by either a completely |
| * transparent entry or by the background color at full |
| * precision (and the background color is not a simple gray leve |
| * in this case.) |
| */ |
| expand_tRNS = 1; |
| output_processing = PNG_CMAP_TRANS; |
| background_index = 254; |
| |
| /* And set (overwrite) color-map entry 254 to the actual |
| * background color at full precision. |
| */ |
| png_create_colormap_entry(display, 254, back_r, back_g, back_b, |
| back_alpha, output_encoding); |
| } |
| |
| else |
| output_processing = PNG_CMAP_NONE; |
| } |
| break; |
| |
| case PNG_COLOR_TYPE_GRAY_ALPHA: |
| /* 8-bit or 16-bit PNG with two channels - gray and alpha. A minimum |
| * of 65536 combinations. If, however, the alpha channel is to be |
| * removed there are only 256 possibilities if the background is gray. |
| * (Otherwise there is a subset of the 65536 possibilities defined by |
| * the triangle between black, white and the background color.) |
| * |
| * Reduce 16-bit files to 8-bit and sRGB encode the result. No need to |
| * worry about tRNS matching - tRNS is ignored if there is an alpha |
| * channel. |
| */ |
| data_encoding = E_sRGB; |
| |
| if (output_format & PNG_FORMAT_FLAG_ALPHA) |
| { |
| if (PNG_GA_COLORMAP_ENTRIES > image->colormap_entries) |
| png_error(png_ptr, "gray+alpha color-map: too few entries"); |
| |
| cmap_entries = make_ga_colormap(display); |
| |
| background_index = PNG_CMAP_GA_BACKGROUND; |
| output_processing = PNG_CMAP_GA; |
| } |
| |
| else /* alpha is removed */ |
| { |
| /* Alpha must be removed as the PNG data is processed when the |
| * background is a color because the G and A channels are |
| * independent and the vector addition (non-parallel vectors) is a |
| * 2-D problem. |
| * |
| * This can be reduced to the same algorithm as above by making a |
| * colormap containing gray levels (for the opaque grays), a |
| * background entry (for a transparent pixel) and a set of four six |
| * level color values, one set for each intermediate alpha value. |
| * See the comments in make_ga_colormap for how this works in the |
| * per-pixel processing. |
| * |
| * If the background is gray, however, we only need a 256 entry gray |
| * level color map. It is sufficient to make the entry generated |
| * for the background color be exactly the color specified. |
| */ |
| if ((output_format & PNG_FORMAT_FLAG_COLOR) == 0 || |
| (back_r == back_g && back_g == back_b)) |
| { |
| /* Background is gray; no special processing will be required. */ |
| png_color_16 c; |
| png_uint_32 gray = back_g; |
| |
| if (PNG_GRAY_COLORMAP_ENTRIES > image->colormap_entries) |
| png_error(png_ptr, "gray-alpha color-map: too few entries"); |
| |
| cmap_entries = make_gray_colormap(display); |
| |
| if (output_encoding == E_LINEAR) |
| { |
| gray = PNG_sRGB_FROM_LINEAR(gray * 255); |
| |
| /* And make sure the corresponding palette entry matches. */ |
| png_create_colormap_entry(display, gray, back_g, back_g, |
| back_g, 65535, E_LINEAR); |
| } |
| |
| /* The background passed to libpng, however, must be the sRGB |
| * value. |
| */ |
| c.index = 0; /*unused*/ |
| c.gray = c.red = c.green = c.blue = (png_uint_16)gray; |
| |
| png_set_background_fixed(png_ptr, &c, |
| PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, |
| 0/*gamma: not used*/); |
| |
| output_processing = PNG_CMAP_NONE; |
| } |
| |
| else |
| { |
| png_uint_32 i, a; |
| |
| /* This is the same as png_make_ga_colormap, above, except that |
| * the entries are all opaque. |
| */ |
| if (PNG_GA_COLORMAP_ENTRIES > image->colormap_entries) |
| png_error(png_ptr, "ga-alpha color-map: too few entries"); |
| |
| i = 0; |
| while (i < 231) |
| { |
| png_uint_32 gray = (i * 256 + 115) / 231; |
| png_create_colormap_entry(display, i++, gray, gray, gray, |
| 255, E_sRGB); |
| } |
| |
| /* NOTE: this preserves the full precision of the application |
| * background color. |
| */ |
| background_index = i; |
| png_create_colormap_entry(display, i++, back_r, back_g, back_b, |
| output_encoding == E_LINEAR ? 65535U : 255U, output_encoding); |
| |
| /* For non-opaque input composite on the sRGB background - this |
| * requires inverting the encoding for each component. The input |
| * is still converted to the sRGB encoding because this is a |
| * reasonable approximate to the logarithmic curve of human |
| * visual sensitivity, at least over the narrow range which PNG |
| * represents. Consequently 'G' is always sRGB encoded, while |
| * 'A' is linear. We need the linear background colors. |
| */ |
| if (output_encoding == E_sRGB) /* else already linear */ |
| { |
| /* This may produce a value not exactly matching the |
| * background, but that's ok because these numbers are only |
| * used when alpha != 0 |
| */ |
| back_r = png_sRGB_table[back_r]; |
| back_g = png_sRGB_table[back_g]; |
| back_b = png_sRGB_table[back_b]; |
| } |
| |
| for (a=1; a<5; ++a) |
| { |
| unsigned int g; |
| |
| /* PNG_sRGB_FROM_LINEAR expects a 16-bit linear value scaled |
| * by an 8-bit alpha value (0..255). |
| */ |
| png_uint_32 alpha = 51 * a; |
| png_uint_32 back_rx = (255-alpha) * back_r; |
| png_uint_32 back_gx = (255-alpha) * back_g; |
| png_uint_32 back_bx = (255-alpha) * back_b; |
| |
| for (g=0; g<6; ++g) |
| { |
| png_uint_32 gray = png_sRGB_table[g*51] * alpha; |
| |
| png_create_colormap_entry(display, i++, |
| PNG_sRGB_FROM_LINEAR(gray + back_rx), |
| PNG_sRGB_FROM_LINEAR(gray + back_gx), |
| PNG_sRGB_FROM_LINEAR(gray + back_bx), 255, E_sRGB); |
| } |
| } |
| |
| cmap_entries = i; |
| output_processing = PNG_CMAP_GA; |
| } |
| } |
| break; |
| |
| case PNG_COLOR_TYPE_RGB: |
| case PNG_COLOR_TYPE_RGB_ALPHA: |
| /* Exclude the case where the output is gray; we can always handle this |
| * with the cases above. |
| */ |
| if ((output_format & PNG_FORMAT_FLAG_COLOR) == 0) |
| { |
| /* The color-map will be grayscale, so we may as well convert the |
| * input RGB values to a simple grayscale and use the grayscale |
| * code above. |
| * |
| * NOTE: calling this apparently damages the recognition of the |
| * transparent color in background color handling; call |
| * png_set_tRNS_to_alpha before png_set_background_fixed. |
| */ |
| png_set_rgb_to_gray_fixed(png_ptr, PNG_ERROR_ACTION_NONE, -1, |
| -1); |
| data_encoding = E_sRGB; |
| |
| /* The output will now be one or two 8-bit gray or gray+alpha |
| * channels. The more complex case arises when the input has alpha. |
| */ |
| if ((png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || |
| png_ptr->num_trans > 0) && |
| (output_format & PNG_FORMAT_FLAG_ALPHA) != 0) |
| { |
| /* Both input and output have an alpha channel, so no background |
| * processing is required; just map the GA bytes to the right |
| * color-map entry. |
| */ |
| expand_tRNS = 1; |
| |
| if (PNG_GA_COLORMAP_ENTRIES > image->colormap_entries) |
| png_error(png_ptr, "rgb[ga] color-map: too few entries"); |
| |
| cmap_entries = make_ga_colormap(display); |
| background_index = PNG_CMAP_GA_BACKGROUND; |
| output_processing = PNG_CMAP_GA; |
| } |
| |
| else |
| { |
| /* Either the input or the output has no alpha channel, so there |
| * will be no non-opaque pixels in the color-map; it will just be |
| * grayscale. |
| */ |
| if (PNG_GRAY_COLORMAP_ENTRIES > image->colormap_entries) |
| png_error(png_ptr, "rgb[gray] color-map: too few entries"); |
| |
| /* Ideally this code would use libpng to do the gamma correction, |
| * but if an input alpha channel is to be removed we will hit the |
| * libpng bug in gamma+compose+rgb-to-gray (the double gamma |
| * correction bug). Fix this by dropping the gamma correction in |
| * this case and doing it in the palette; this will result in |
| * duplicate palette entries, but that's better than the |
| * alternative of double gamma correction. |
| */ |
| if ((png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || |
| png_ptr->num_trans > 0) && |
| png_gamma_not_sRGB(png_ptr->colorspace.gamma)) |
| { |
| cmap_entries = make_gray_file_colormap(display); |
| data_encoding = E_FILE; |
| } |
| |
| else |
| cmap_entries = make_gray_colormap(display); |
| |
| /* But if the input has alpha or transparency it must be removed |
| */ |
| if (png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || |
| png_ptr->num_trans > 0) |
| { |
| png_color_16 c; |
| png_uint_32 gray = back_g; |
| |
| /* We need to ensure that the application background exists in |
| * the colormap and that completely transparent pixels map to |
| * it. Achieve this simply by ensuring that the entry |
| * selected for the background really is the background color. |
| */ |
| if (data_encoding == E_FILE) /* from the fixup above */ |
| { |
| /* The app supplied a gray which is in output_encoding, we |
| * need to convert it to a value of the input (E_FILE) |
| * encoding then set this palette entry to the required |
| * output encoding. |
| */ |
| if (output_encoding == E_sRGB) |
| gray = png_sRGB_table[gray]; /* now E_LINEAR */ |
| |
| gray = PNG_DIV257(png_gamma_16bit_correct(gray, |
| png_ptr->colorspace.gamma)); /* now E_FILE */ |
| |
| /* And make sure the corresponding palette entry contains |
| * exactly the required sRGB value. |
| */ |
| png_create_colormap_entry(display, gray, back_g, back_g, |
| back_g, 0/*unused*/, output_encoding); |
| } |
| |
| else if (output_encoding == E_LINEAR) |
| { |
| gray = PNG_sRGB_FROM_LINEAR(gray * 255); |
| |
| /* And make sure the corresponding palette entry matches. |
| */ |
| png_create_colormap_entry(display, gray, back_g, back_g, |
| back_g, 0/*unused*/, E_LINEAR); |
| } |
| |
| /* The background passed to libpng, however, must be the |
| * output (normally sRGB) value. |
| */ |
| c.index = 0; /*unused*/ |
| c.gray = c.red = c.green = c.blue = (png_uint_16)gray; |
| |
| /* NOTE: the following is apparently a bug in libpng. Without |
| * it the transparent color recognition in |
| * png_set_background_fixed seems to go wrong. |
| */ |
| expand_tRNS = 1; |
| png_set_background_fixed(png_ptr, &c, |
| PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, |
| 0/*gamma: not used*/); |
| } |
| |
| output_processing = PNG_CMAP_NONE; |
| } |
| } |
| |
| else /* output is color */ |
| { |
| /* We could use png_quantize here so long as there is no transparent |
| * color or alpha; png_quantize ignores alpha. Easier overall just |
| * to do it once and using PNG_DIV51 on the 6x6x6 reduced RGB cube. |
| * Consequently we always want libpng to produce sRGB data. |
| */ |
| data_encoding = E_sRGB; |
| |
| /* Is there any transparency or alpha? */ |
| if (png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || |
| png_ptr->num_trans > 0) |
| { |
| /* Is there alpha in the output too? If so all four channels are |
| * processed into a special RGB cube with alpha support. |
| */ |
| if (output_format & PNG_FORMAT_FLAG_ALPHA) |
| { |
| png_uint_32 r; |
| |
| if (PNG_RGB_COLORMAP_ENTRIES+1+27 > image->colormap_entries) |
| png_error(png_ptr, "rgb+alpha color-map: too few entries"); |
| |
| cmap_entries = make_rgb_colormap(display); |
| |
| /* Add a transparent entry. */ |
| png_create_colormap_entry(display, cmap_entries, 255, 255, |
| 255, 0, E_sRGB); |
| |
| /* This is stored as the background index for the processing |
| * algorithm. |
| */ |
| background_index = cmap_entries++; |
| |
| /* Add 27 r,g,b entries each with alpha 0.5. */ |
| for (r=0; r<256; r = (r << 1) | 0x7f) |
| { |
| png_uint_32 g; |
| |
| for (g=0; g<256; g = (g << 1) | 0x7f) |
| { |
| png_uint_32 b; |
| |
| /* This generates components with the values 0, 127 and |
| * 255 |
| */ |
| for (b=0; b<256; b = (b << 1) | 0x7f) |
| png_create_colormap_entry(display, cmap_entries++, |
| r, g, b, 128, E_sRGB); |
| } |
| } |
| |
| expand_tRNS = 1; |
| output_processing = PNG_CMAP_RGB_ALPHA; |
| } |
| |
| else |
| { |
| /* Alpha/transparency must be removed. The background must |
| * exist in the color map (achieved by setting adding it after |
| * the 666 color-map). If the standard processing code will |
| * pick up this entry automatically that's all that is |
| * required; libpng can be called to do the background |
| * processing. |
| */ |
| unsigned int sample_size = |
| PNG_IMAGE_SAMPLE_SIZE(output_format); |
| png_uint_32 r, g, b; /* sRGB background */ |
| |
| if (PNG_RGB_COLORMAP_ENTRIES+1+27 > image->colormap_entries) |
| png_error(png_ptr, "rgb-alpha color-map: too few entries"); |
| |
| cmap_entries = make_rgb_colormap(display); |
| |
| png_create_colormap_entry(display, cmap_entries, back_r, |
| back_g, back_b, 0/*unused*/, output_encoding); |
| |
| if (output_encoding == E_LINEAR) |
| { |
| r = PNG_sRGB_FROM_LINEAR(back_r * 255); |
| g = PNG_sRGB_FROM_LINEAR(back_g * 255); |
| b = PNG_sRGB_FROM_LINEAR(back_b * 255); |
| } |
| |
| else |
| { |
| r = back_r; |
| g = back_g; |
| b = back_g; |
| } |
| |
| /* Compare the newly-created color-map entry with the one the |
| * PNG_CMAP_RGB algorithm will use. If the two entries don't |
| * match, add the new one and set this as the background |
| * index. |
| */ |
| if (memcmp((png_const_bytep)display->colormap + |
| sample_size * cmap_entries, |
| (png_const_bytep)display->colormap + |
| sample_size * PNG_RGB_INDEX(r,g,b), |
| sample_size) != 0) |
| { |
| /* The background color must be added. */ |
| background_index = cmap_entries++; |
| |
| /* Add 27 r,g,b entries each with created by composing with |
| * the background at alpha 0.5. |
| */ |
| for (r=0; r<256; r = (r << 1) | 0x7f) |
| { |
| for (g=0; g<256; g = (g << 1) | 0x7f) |
| { |
| /* This generates components with the values 0, 127 |
| * and 255 |
| */ |
| for (b=0; b<256; b = (b << 1) | 0x7f) |
| png_create_colormap_entry(display, cmap_entries++, |
| png_colormap_compose(display, r, E_sRGB, 128, |
| back_r, output_encoding), |
| png_colormap_compose(display, g, E_sRGB, 128, |
| back_g, output_encoding), |
| png_colormap_compose(display, b, E_sRGB, 128, |
| back_b, output_encoding), |
| 0/*unused*/, output_encoding); |
| } |
| } |
| |
| expand_tRNS = 1; |
| output_processing = PNG_CMAP_RGB_ALPHA; |
| } |
| |
| else /* background color is in the standard color-map */ |
| { |
| png_color_16 c; |
| |
| c.index = 0; /*unused*/ |
| c.red = (png_uint_16)back_r; |
| c.gray = c.green = (png_uint_16)back_g; |
| c.blue = (png_uint_16)back_b; |
| |
| png_set_background_fixed(png_ptr, &c, |
| PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, |
| 0/*gamma: not used*/); |
| |
| output_processing = PNG_CMAP_RGB; |
| } |
| } |
| } |
| |
| else /* no alpha or transparency in the input */ |
| { |
| /* Alpha in the output is irrelevant, simply map the opaque input |
| * pixels to the 6x6x6 color-map. |
| */ |
| if (PNG_RGB_COLORMAP_ENTRIES > image->colormap_entries) |
| png_error(png_ptr, "rgb color-map: too few entries"); |
| |
| cmap_entries = make_rgb_colormap(display); |
| output_processing = PNG_CMAP_RGB; |
| } |
| } |
| break; |
| |
| case PNG_COLOR_TYPE_PALETTE: |
| /* It's already got a color-map. It may be necessary to eliminate the |
| * tRNS entries though. |
| */ |
| { |
| unsigned int num_trans = png_ptr->num_trans; |
| png_const_bytep trans = num_trans > 0 ? png_ptr->trans_alpha : NULL; |
| png_const_colorp colormap = png_ptr->palette; |
| const int do_background = trans != NULL && |
| (output_format & PNG_FORMAT_FLAG_ALPHA) == 0; |
| unsigned int i; |
| |
| /* Just in case: */ |
| if (trans == NULL) |
| num_trans = 0; |
| |
| output_processing = PNG_CMAP_NONE; |
| data_encoding = E_FILE; /* Don't change from color-map indicies */ |
| cmap_entries = png_ptr->num_palette; |
| if (cmap_entries > 256) |
| cmap_entries = 256; |
| |
| if (cmap_entries > image->colormap_entries) |
| png_error(png_ptr, "palette color-map: too few entries"); |
| |
| for (i=0; i < cmap_entries; ++i) |
| { |
| if (do_background && i < num_trans && trans[i] < 255) |
| { |
| if (trans[i] == 0) |
| png_create_colormap_entry(display, i, back_r, back_g, |
| back_b, 0, output_encoding); |
| |
| else |
| { |
| /* Must compose the PNG file color in the color-map entry |
| * on the sRGB color in 'back'. |
| */ |
| png_create_colormap_entry(display, i, |
| png_colormap_compose(display, colormap[i].red, E_FILE, |
| trans[i], back_r, output_encoding), |
| png_colormap_compose(display, colormap[i].green, E_FILE, |
| trans[i], back_g, output_encoding), |
| png_colormap_compose(display, colormap[i].blue, E_FILE, |
| trans[i], back_b, output_encoding), |
| output_encoding == E_LINEAR ? trans[i] * 257U : |
| trans[i], |
| output_encoding); |
| } |
| } |
| |
| else |
| png_create_colormap_entry(display, i, colormap[i].red, |
| colormap[i].green, colormap[i].blue, |
| i < num_trans ? trans[i] : 255U, E_FILE/*8-bit*/); |
| } |
| |
| /* The PNG data may have indicies packed in fewer than 8 bits, it |
| * must be expanded if so. |
| */ |
| if (png_ptr->bit_depth < 8) |
| png_set_packing(png_ptr); |
| } |
| break; |
| |
| default: |
| png_error(png_ptr, "invalid PNG color type"); |
| /*NOT REACHED*/ |
| break; |
| } |
| |
| /* Now deal with the output processing */ |
| if (expand_tRNS && png_ptr->num_trans > 0 && |
| (png_ptr->color_type & PNG_COLOR_MASK_ALPHA) == 0) |
| png_set_tRNS_to_alpha(png_ptr); |
| |
| switch (data_encoding) |
| { |
| default: |
| png_error(png_ptr, "bad data option (internal error)"); |
| break; |
| |
| case E_sRGB: |
| /* Change to 8-bit sRGB */ |
| png_set_alpha_mode_fixed(png_ptr, PNG_ALPHA_PNG, PNG_GAMMA_sRGB); |
| /* FALL THROUGH */ |
| |
| case E_FILE: |
| if (png_ptr->bit_depth > 8) |
| png_set_scale_16(png_ptr); |
| break; |
| } |
| |
| if (cmap_entries > 256 || cmap_entries > image->colormap_entries) |
| png_error(png_ptr, "color map overflow (BAD internal error)"); |
| |
| image->colormap_entries = cmap_entries; |
| |
| /* Double check using the recorded background index */ |
| switch (output_processing) |
| { |
| case PNG_CMAP_NONE: |
| if (background_index != PNG_CMAP_NONE_BACKGROUND) |
| goto bad_background; |
| break; |
| |
| case PNG_CMAP_GA: |
| if (background_index != PNG_CMAP_GA_BACKGROUND) |
| goto bad_background; |
| break; |
| |
| case PNG_CMAP_TRANS: |
| if (background_index >= cmap_entries || |
| background_index != PNG_CMAP_TRANS_BACKGROUND) |
| goto bad_background; |
| break; |
| |
| case PNG_CMAP_RGB: |
| if (background_index != PNG_CMAP_RGB_BACKGROUND) |
| goto bad_background; |
| break; |
| |
| case PNG_CMAP_RGB_ALPHA: |
| if (background_index != PNG_CMAP_RGB_ALPHA_BACKGROUND) |
| goto bad_background; |
| break; |
| |
| default: |
| png_error(png_ptr, "bad processing option (internal error)"); |
| |
| bad_background: |
| png_error(png_ptr, "bad background index (internal error)"); |
| } |
| |
| display->colormap_processing = output_processing; |
| |
| return 1/*ok*/; |
| } |
| |
| /* The final part of the color-map read called from png_image_finish_read. */ |
| static int |
| png_image_read_and_map(png_voidp argument) |
| { |
| png_image_read_control *display = png_voidcast(png_image_read_control*, |
| argument); |
| png_imagep image = display->image; |
| png_structrp png_ptr = image->opaque->png_ptr; |
| int passes; |
| |
| /* Called when the libpng data must be transformed into the color-mapped |
| * form. There is a local row buffer in display->local and this routine must |
| * do the interlace handling. |
| */ |
| switch (png_ptr->interlaced) |
| { |
| case PNG_INTERLACE_NONE: |
| passes = 1; |
| break; |
| |
| case PNG_INTERLACE_ADAM7: |
| passes = PNG_INTERLACE_ADAM7_PASSES; |
| break; |
| |
| default: |
| passes = 0; |
| png_error(png_ptr, "unknown interlace type"); |
| } |
| |
| { |
| png_uint_32 height = image->height; |
| png_uint_32 width = image->width; |
| int proc = display->colormap_processing; |
| png_bytep first_row = png_voidcast(png_bytep, display->first_row); |
| ptrdiff_t step_row = display->row_bytes; |
| int pass; |
| |
| for (pass = 0; pass < passes; ++pass) |
| { |
| unsigned int startx, stepx, stepy; |
| png_uint_32 y; |
| |
| if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) |
| { |
| /* The row may be empty for a short image: */ |
| if (PNG_PASS_COLS(width, pass) == 0) |
| continue; |
| |
| startx = PNG_PASS_START_COL(pass); |
| stepx = PNG_PASS_COL_OFFSET(pass); |
| y = PNG_PASS_START_ROW(pass); |
| stepy = PNG_PASS_ROW_OFFSET(pass); |
| } |
| |
| else |
| { |
| y = 0; |
| startx = 0; |
| stepx = stepy = 1; |
| } |
| |
| for (; y<height; y += stepy) |
| { |
| png_bytep inrow = png_voidcast(png_bytep, display->local_row); |
| png_bytep outrow = first_row + y * step_row; |
| png_const_bytep end_row = outrow + width; |
| |
| /* Read read the libpng data into the temporary buffer. */ |
| png_read_row(png_ptr, inrow, NULL); |
| |
| /* Now process the row according to the processing option, note |
| * that the caller verifies that the format of the libpng output |
| * data is as required. |
| */ |
| outrow += startx; |
| switch (proc) |
| { |
| case PNG_CMAP_GA: |
| for (; outrow < end_row; outrow += stepx) |
| { |
| /* The data is always in the PNG order */ |
| unsigned int gray = *inrow++; |
| unsigned int alpha = *inrow++; |
| unsigned int entry; |
| |
| /* NOTE: this code is copied as a comment in |
| * make_ga_colormap above. Please update the |
| * comment if you change this code! |
| */ |
| if (alpha > 229) /* opaque */ |
| { |
| entry = (231 * gray + 128) >> 8; |
| } |
| else if (alpha < 26) /* transparent */ |
| { |
| entry = 231; |
| } |
| else /* partially opaque */ |
| { |
| entry = 226 + 6 * PNG_DIV51(alpha) + PNG_DIV51(gray); |
| } |
| |
| *outrow = (png_byte)entry; |
| } |
| break; |
| |
| case PNG_CMAP_TRANS: |
| for (; outrow < end_row; outrow += stepx) |
| { |
| png_byte gray = *inrow++; |
| png_byte alpha = *inrow++; |
| |
| if (alpha == 0) |
| *outrow = PNG_CMAP_TRANS_BACKGROUND; |
| |
| else if (gray != PNG_CMAP_TRANS_BACKGROUND) |
| *outrow = gray; |
| |
| else |
| *outrow = (png_byte)(PNG_CMAP_TRANS_BACKGROUND+1); |
| } |
| break; |
| |
| case PNG_CMAP_RGB: |
| for (; outrow < end_row; outrow += stepx) |
| { |
| *outrow = PNG_RGB_INDEX(inrow[0], inrow[1], inrow[2]); |
| inrow += 3; |
| } |
| break; |
| |
| case PNG_CMAP_RGB_ALPHA: |
| for (; outrow < end_row; outrow += stepx) |
| { |
| unsigned int alpha = inrow[3]; |
| |
| /* Because the alpha entries only hold alpha==0.5 values |
| * split the processing at alpha==0.25 (64) and 0.75 |
| * (196). |
| */ |
| |
| if (alpha >= 196) |
| *outrow = PNG_RGB_INDEX(inrow[0], inrow[1], |
| inrow[2]); |
| |
| else if (alpha < 64) |
| *outrow = PNG_CMAP_RGB_ALPHA_BACKGROUND; |
| |
| else |
| { |
| /* Likewise there are three entries for each of r, g |
| * and b. We could select the entry by popcount on |
| * the top two bits on those architectures that |
| * support it, this is what the code below does, |
| * crudely. |
| */ |
| unsigned int back_i = PNG_CMAP_RGB_ALPHA_BACKGROUND+1; |
| |
| /* Here are how the values map: |
| * |
| * 0x00 .. 0x3f -> 0 |
| * 0x40 .. 0xbf -> 1 |
| * 0xc0 .. 0xff -> 2 |
| * |
| * So, as above with the explicit alpha checks, the |
| * breakpoints are at 64 and 196. |
| */ |
| if (inrow[0] & 0x80) back_i += 9; /* red */ |
| if (inrow[0] & 0x40) back_i += 9; |
| if (inrow[0] & 0x80) back_i += 3; /* green */ |
| if (inrow[0] & 0x40) back_i += 3; |
| if (inrow[0] & 0x80) back_i += 1; /* blue */ |
| if (inrow[0] & 0x40) back_i += 1; |
| |
| *outrow = (png_byte)back_i; |
| } |
| |
| inrow += 4; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| } |
| } |
| } |
| |
| return 1; |
| } |
| |
| static int |
| png_image_read_colormapped(png_voidp argument) |
| { |
| png_image_read_control *display = png_voidcast(png_image_read_control*, |
| argument); |
| png_imagep image = display->image; |
| png_controlp control = image->opaque; |
| png_structrp png_ptr = control->png_ptr; |
| png_inforp info_ptr = control->info_ptr; |
| |
| int passes = 0; /* As a flag */ |
| |
| PNG_SKIP_CHUNKS(png_ptr); |
| |
| /* Update the 'info' structure and make sure the result is as required; first |
| * make sure to turn on the interlace handling if it will be required |
| * (because it can't be turned on *after* the call to png_read_update_info!) |
| */ |
| if (display->colormap_processing == PNG_CMAP_NONE) |
| passes = png_set_interlace_handling(png_ptr); |
| |
| png_read_update_info(png_ptr, info_ptr); |
| |
| /* The expected output can be deduced from the colormap_processing option. */ |
| switch (display->colormap_processing) |
| { |
| case PNG_CMAP_NONE: |
| /* Output must be one channel and one byte per pixel, the output |
| * encoding can be anything. |
| */ |
| if ((info_ptr->color_type == PNG_COLOR_TYPE_PALETTE || |
| info_ptr->color_type == PNG_COLOR_TYPE_GRAY) && |
| info_ptr->bit_depth == 8) |
| break; |
| |
| goto bad_output; |
| |
| case PNG_CMAP_TRANS: |
| case PNG_CMAP_GA: |
| /* Output must be two channels and the 'G' one must be sRGB, the latter |
| * can be checked with an exact number because it should have been set |
| * to this number above! |
| */ |
| if (info_ptr->color_type == PNG_COLOR_TYPE_GRAY_ALPHA && |
| info_ptr->bit_depth == 8 && |
| png_ptr->screen_gamma == PNG_GAMMA_sRGB && |
| image->colormap_entries == 256) |
| break; |
| |
| goto bad_output; |
| |
| case PNG_CMAP_RGB: |
| /* Output must be 8-bit sRGB encoded RGB */ |
| if (info_ptr->color_type == PNG_COLOR_TYPE_RGB && |
| info_ptr->bit_depth == 8 && |
| png_ptr->screen_gamma == PNG_GAMMA_sRGB && |
| image->colormap_entries == 216) |
| break; |
| |
| goto bad_output; |
| |
| case PNG_CMAP_RGB_ALPHA: |
| /* Output must be 8-bit sRGB encoded RGBA */ |
| if (info_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA && |
| info_ptr->bit_depth == 8 && |
| png_ptr->screen_gamma == PNG_GAMMA_sRGB && |
| image->colormap_entries == 244 /* 216 + 1 + 27 */) |
| break; |
| |
| /* goto bad_output; */ |
| /* FALL THROUGH */ |
| |
| default: |
| bad_output: |
| png_error(png_ptr, "bad color-map processing (internal error)"); |
| } |
| |
| /* Now read the rows. Do this here if it is possible to read directly into |
| * the output buffer, otherwise allocate a local row buffer of the maximum |
| * size libpng requires and call the relevant processing routine safely. |
| */ |
| { |
| png_voidp first_row = display->buffer; |
| ptrdiff_t row_bytes = display->row_stride; |
| |
| /* The following expression is designed to work correctly whether it gives |
| * a signed or an unsigned result. |
| */ |
| if (row_bytes < 0) |
| { |
| char *ptr = png_voidcast(char*, first_row); |
| ptr += (image->height-1) * (-row_bytes); |
| first_row = png_voidcast(png_voidp, ptr); |
| } |
| |
| display->first_row = first_row; |
| display->row_bytes = row_bytes; |
| } |
| |
| if (passes == 0) |
| { |
| int result; |
| png_voidp row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, info_ptr)); |
| |
| display->local_row = row; |
| result = png_safe_execute(image, png_image_read_and_map, display); |
| display->local_row = NULL; |
| png_free(png_ptr, row); |
| |
| return result; |
| } |
| |
| else |
| { |
| png_alloc_size_t row_bytes = display->row_bytes; |
| |
| while (--passes >= 0) |
| { |
| png_uint_32 y = image->height; |
| png_bytep row = png_voidcast(png_bytep, display->first_row); |
| |
| while (y-- > 0) |
| { |
| png_read_row(png_ptr, row, NULL); |
| row += row_bytes; |
| } |
| } |
| |
| return 1; |
| } |
| } |
| |
| /* Just the row reading part of png_image_read. */ |
| static int |
| png_image_read_composite(png_voidp argument) |
| { |
| png_image_read_control *display = png_voidcast(png_image_read_control*, |
| argument); |
| png_imagep image = display->image; |
| png_structrp png_ptr = image->opaque->png_ptr; |
| int passes; |
| |
| switch (png_ptr->interlaced) |
| { |
| case PNG_INTERLACE_NONE: |
| passes = 1; |
| break; |
| |
| case PNG_INTERLACE_ADAM7: |
| passes = PNG_INTERLACE_ADAM7_PASSES; |
| break; |
| |
| default: |
| passes = 0; |
| png_error(png_ptr, "unknown interlace type"); |
| } |
| |
| { |
| png_uint_32 height = image->height; |
| png_uint_32 width = image->width; |
| ptrdiff_t step_row = display->row_bytes; |
| unsigned int channels = (image->format & PNG_FORMAT_FLAG_COLOR) ? 3 : 1; |
| int pass; |
| |
| for (pass = 0; pass < passes; ++pass) |
| { |
| unsigned int startx, stepx, stepy; |
| png_uint_32 y; |
| |
| if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) |
| { |
| /* The row may be empty for a short image: */ |
| if (PNG_PASS_COLS(width, pass) == 0) |
| continue; |
| |
| startx = PNG_PASS_START_COL(pass) * channels; |
| stepx = PNG_PASS_COL_OFFSET(pass) * channels; |
| y = PNG_PASS_START_ROW(pass); |
| stepy = PNG_PASS_ROW_OFFSET(pass); |
| } |
| |
| else |
| { |
| y = 0; |
| startx = 0; |
| stepx = channels; |
| stepy = 1; |
| } |
| |
| for (; y<height; y += stepy) |
| { |
| png_bytep inrow = png_voidcast(png_bytep, display->local_row); |
| png_bytep outrow; |
| png_const_bytep end_row; |
| |
| /* Read the row, which is packed: */ |
| png_read_row(png_ptr, inrow, NULL); |
| |
| outrow = png_voidcast(png_bytep, display->first_row); |
| outrow += y * step_row; |
| end_row = outrow + width * channels; |
| |
| /* Now do the composition on each pixel in this row. */ |
| outrow += startx; |
| for (; outrow < end_row; outrow += stepx) |
| { |
| png_byte alpha = inrow[channels]; |
| |
| if (alpha > 0) /* else no change to the output */ |
| { |
| unsigned int c; |
| |
| for (c=0; c<channels; ++c) |
| { |
| png_uint_32 component = inrow[c]; |
| |
| if (alpha < 255) /* else just use component */ |
| { |
| /* This is PNG_OPTIMIZED_ALPHA, the component value |
| * is a linear 8-bit value. Combine this with the |
| * current outrow[c] value which is sRGB encoded. |
| * Arithmetic here is 16-bits to preserve the output |
| * values correctly. |
| */ |
| component *= 257*255; /* =65535 */ |
| component += (255-alpha)*png_sRGB_table[outrow[c]]; |
| |
| /* So 'component' is scaled by 255*65535 and is |
| * therefore appropriate for the sRGB to linear |
| * conversion table. |
| */ |
| component = PNG_sRGB_FROM_LINEAR(component); |
| } |
| |
| outrow[c] = (png_byte)component; |
| } |
| } |
| |
| inrow += channels+1; /* components and alpha channel */ |
| } |
| } |
| } |
| } |
| |
| return 1; |
| } |
| |
| /* The do_local_background case; called when all the following transforms are to |
| * be done: |
| * |
| * PNG_RGB_TO_GRAY |
| * PNG_COMPOSITE |
| * PNG_GAMMA |
| * |
| * This is a work-round for the fact that both the PNG_RGB_TO_GRAY and |
| * PNG_COMPOSITE code performs gamma correction, so we get double gamma |
| * correction. The fix-up is to prevent the PNG_COMPOSITE operation happening |
| * inside libpng, so this routine sees an 8 or 16-bit gray+alpha row and handles |
| * the removal or pre-multiplication of the alpha channel. |
| */ |
| static int |
| png_image_read_background(png_voidp argument) |
| { |
| png_image_read_control *display = png_voidcast(png_image_read_control*, |
| argument); |
| png_imagep image = display->image; |
| png_structrp png_ptr = image->opaque->png_ptr; |
| png_inforp info_ptr = image->opaque->info_ptr; |
| png_uint_32 height = image->height; |
| png_uint_32 width = image->width; |
| int pass, passes; |
| |
| /* Double check the convoluted logic below. We expect to get here with |
| * libpng doing rgb to gray and gamma correction but background processing |
| * left to the png_image_read_background function. The rows libpng produce |
| * might be 8 or 16-bit but should always have two channels; gray plus alpha. |
| */ |
| if ((png_ptr->transformations & PNG_RGB_TO_GRAY) == 0) |
| png_error(png_ptr, "lost rgb to gray"); |
| |
| if ((png_ptr->transformations & PNG_COMPOSE) != 0) |
| png_error(png_ptr, "unexpected compose"); |
| |
| if (png_get_channels(png_ptr, info_ptr) != 2) |
| png_error(png_ptr, "lost/gained channels"); |
| |
| /* Expect the 8-bit case to always remove the alpha channel */ |
| if ((image->format & PNG_FORMAT_FLAG_LINEAR) == 0 && |
| (image->format & PNG_FORMAT_FLAG_ALPHA) != 0) |
| png_error(png_ptr, "unexpected 8-bit transformation"); |
| |
| switch (png_ptr->interlaced) |
| { |
| case PNG_INTERLACE_NONE: |
| passes = 1; |
| break; |
| |
| case PNG_INTERLACE_ADAM7: |
| passes = PNG_INTERLACE_ADAM7_PASSES; |
| break; |
| |
| default: |
| passes = 0; |
| png_error(png_ptr, "unknown interlace type"); |
| } |
| |
| switch (png_get_bit_depth(png_ptr, info_ptr)) |
| { |
| default: |
| png_error(png_ptr, "unexpected bit depth"); |
| break; |
| |
| case 8: |
| /* 8-bit sRGB gray values with an alpha channel; the alpha channel is |
| * to be removed by composing on a backgroundi: either the row if |
| * display->background is NULL or display->background->green if not. |
| * Unlike the code above ALPHA_OPTIMIZED has *not* been done. |
| */ |
| { |
| png_bytep first_row = png_voidcast(png_bytep, display->first_row); |
| ptrdiff_t step_row = display->row_bytes; |
| |
| for (pass = 0; pass < passes; ++pass) |
| { |
| png_bytep row = png_voidcast(png_bytep, |
| display->first_row); |
| unsigned int startx, stepx, stepy; |
| png_uint_32 y; |
| |
| if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) |
| { |
| /* The row may be empty for a short image: */ |
| if (PNG_PASS_COLS(width, pass) == 0) |
| continue; |
| |
| startx = PNG_PASS_START_COL(pass); |
| stepx = PNG_PASS_COL_OFFSET(pass); |
| y = PNG_PASS_START_ROW(pass); |
| stepy = PNG_PASS_ROW_OFFSET(pass); |
| } |
| |
| else |
| { |
| y = 0; |
| startx = 0; |
| stepx = stepy = 1; |
| } |
| |
| if (display->background == NULL) |
| { |
| for (; y<height; y += stepy) |
| { |
| png_bytep inrow = png_voidcast(png_bytep, |
| display->local_row); |
| png_bytep outrow = first_row + y * step_row; |
| png_const_bytep end_row = outrow + width; |
| |
| /* Read the row, which is packed: */ |
| png_read_row(png_ptr, inrow, NULL); |
| |
| /* Now do the composition on each pixel in this row. */ |
| outrow += startx; |
| for (; outrow < end_row; outrow += stepx) |
| { |
| png_byte alpha = inrow[1]; |
| |
| if (alpha > 0) /* else no change to the output */ |
| { |
| png_uint_32 component = inrow[0]; |
| |
| if (alpha < 255) /* else just use component */ |
| { |
| /* Since PNG_OPTIMIZED_ALPHA was not set it is |
| * necessary to invert the sRGB transfer |
| * function and multiply the alpha out. |
| */ |
| component = png_sRGB_table[component] * alpha; |
| component += png_sRGB_table[outrow[0]] * |
| (255-alpha); |
| component = PNG_sRGB_FROM_LINEAR(component); |
| } |
| |
| outrow[0] = (png_byte)component; |
| } |
| |
| inrow += 2; /* gray and alpha channel */ |
| } |
| } |
| } |
| |
| else /* constant background value */ |
| { |
| png_byte background8 = display->background->green; |
| png_uint_16 background = png_sRGB_table[background8]; |
| |
| for (; y<height; y += stepy) |
| { |
| png_bytep inrow = png_voidcast(png_bytep, |
| display->local_row); |
| png_bytep outrow = first_row + y * step_row; |
| png_const_bytep end_row = outrow + width; |
| |
| /* Read the row, which is packed: */ |
| png_read_row(png_ptr, inrow, NULL); |
| |
| /* Now do the composition on each pixel in this row. */ |
| outrow += startx; |
| for (; outrow < end_row; outrow += stepx) |
| { |
| png_byte alpha = inrow[1]; |
| |
| if (alpha > 0) /* else use background */ |
| { |
| png_uint_32 component = inrow[0]; |
| |
| if (alpha < 255) /* else just use component */ |
| { |
| component = png_sRGB_table[component] * alpha; |
| component += background * (255-alpha); |
| component = PNG_sRGB_FROM_LINEAR(component); |
| } |
| |
| outrow[0] = (png_byte)component; |
| } |
| |
| else |
| outrow[0] = background8; |
| |
| inrow += 2; /* gray and alpha channel */ |
| } |
| |
| row += display->row_bytes; |
| } |
| } |
| } |
| } |
| break; |
| |
| case 16: |
| /* 16-bit linear with pre-multiplied alpha; the pre-multiplication must |
| * still be done and, maybe, the alpha channel removed. This code also |
| * handles the alpha-first option. |
| */ |
| { |
| png_uint_16p first_row = png_voidcast(png_uint_16p, |
| display->first_row); |
| /* The division by two is safe because the caller passed in a |
| * stride which was multiplied by 2 (below) to get row_bytes. |
| */ |
| ptrdiff_t step_row = display->row_bytes / 2; |
| int preserve_alpha = (image->format & PNG_FORMAT_FLAG_ALPHA) != 0; |
| unsigned int outchannels = 1+preserve_alpha; |
| int swap_alpha = 0; |
| |
| if (preserve_alpha && (image->format & PNG_FORMAT_FLAG_AFIRST)) |
| swap_alpha = 1; |
| |
| for (pass = 0; pass < passes; ++pass) |
| { |
| unsigned int startx, stepx, stepy; |
| png_uint_32 y; |
| |
| /* The 'x' start and step are adjusted to output components here. |
| */ |
| if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) |
| { |
| /* The row may be empty for a short image: */ |
| if (PNG_PASS_COLS(width, pass) == 0) |
| continue; |
| |
| startx = PNG_PASS_START_COL(pass) * outchannels; |
| stepx = PNG_PASS_COL_OFFSET(pass) * outchannels; |
| y = PNG_PASS_START_ROW(pass); |
| stepy = PNG_PASS_ROW_OFFSET(pass); |
| } |
| |
| else |
| { |
| y = 0; |
| startx = 0; |
| stepx = outchannels; |
| stepy = 1; |
| } |
| |
| for (; y<height; y += stepy) |
| { |
| png_const_uint_16p inrow; |
| png_uint_16p outrow = first_row + y*step_row; |
| png_uint_16p end_row = outrow + width * outchannels; |
| |
| /* Read the row, which is packed: */ |
| png_read_row(png_ptr, png_voidcast(png_bytep, |
| display->local_row), NULL); |
| inrow = png_voidcast(png_const_uint_16p, display->local_row); |
| |
| /* Now do the pre-multiplication on each pixel in this row. |
| */ |
| outrow += startx; |
| for (; outrow < end_row; outrow += stepx) |
| { |
| png_uint_32 component = inrow[0]; |
| png_uint_16 alpha = inrow[1]; |
| |
| if (alpha > 0) /* else 0 */ |
| { |
| if (alpha < 65535) /* else just use component */ |
| { |
| component *= alpha; |
| component += 32767; |
| component /= 65535; |
| } |
| } |
| |
| else |
| component = 0; |
| |
| outrow[swap_alpha] = (png_uint_16)component; |
| if (preserve_alpha) |
| outrow[1 ^ swap_alpha] = alpha; |
| |
| inrow += 2; /* components and alpha channel */ |
| } |
| } |
| } |
| } |
| break; |
| } |
| |
| return 1; |
| } |
| |
| /* The guts of png_image_finish_read as a png_safe_execute callback. */ |
| static int |
| png_image_read_direct(png_voidp argument) |
| { |
| png_image_read_control *display = png_voidcast(png_image_read_control*, |
| argument); |
| png_imagep image = display->image; |
| png_structrp png_ptr = image->opaque->png_ptr; |
| png_inforp info_ptr = image->opaque->info_ptr; |
| |
| png_uint_32 format = image->format; |
| int linear = (format & PNG_FORMAT_FLAG_LINEAR) != 0; |
| int do_local_compose = 0; |
| int do_local_background = 0; /* to avoid double gamma correction bug */ |
| int passes = 0; |
| |
| /* Add transforms to ensure the correct output format is produced then check |
| * that the required implementation support is there. Always expand; always |
| * need 8 bits minimum, no palette and expanded tRNS. |
| */ |
| png_set_expand(png_ptr); |
| |
| /* Now check the format to see if it was modified. */ |
| { |
| png_uint_32 base_format = png_image_format(png_ptr) & |
| ~PNG_FORMAT_FLAG_COLORMAP /* removed by png_set_expand */; |
| png_uint_32 change = format ^ base_format; |
| png_fixed_point output_gamma; |
| int mode; /* alpha mode */ |
| |
| /* Do this first so that we have a record if rgb to gray is happening. */ |
| if (change & PNG_FORMAT_FLAG_COLOR) |
| { |
| /* gray<->color transformation required. */ |
| if (format & PNG_FORMAT_FLAG_COLOR) |
| png_set_gray_to_rgb(png_ptr); |
| |
| else |
| { |
| /* libpng can't do both rgb to gray and |
| * background/pre-multiplication if there is also significant gamma |
| * correction, because both operations require linear colors and |
| * the code only supports one transform doing the gamma correction. |
| * Handle this by doing the pre-multiplication or background |
| * operation in this code, if necessary. |
| * |
| * TODO: fix this by rewriting pngrtran.c (!) |
| * |
| * For the moment (given that fixing this in pngrtran.c is an |
| * enormous change) 'do_local_background' is used to indicate that |
| * the problem exists. |
| */ |
| if (base_format & PNG_FORMAT_FLAG_ALPHA) |
| do_local_background = 1/*maybe*/; |
| |
| png_set_rgb_to_gray_fixed(png_ptr, PNG_ERROR_ACTION_NONE, |
| PNG_RGB_TO_GRAY_DEFAULT, PNG_RGB_TO_GRAY_DEFAULT); |
| } |
| |
| change &= ~PNG_FORMAT_FLAG_COLOR; |
| } |
| |
| /* Set the gamma appropriately, linear for 16-bit input, sRGB otherwise. |
| */ |
| { |
| png_fixed_point input_gamma_default; |
| |
| if (base_format & PNG_FORMAT_FLAG_LINEAR) |
| input_gamma_default = PNG_GAMMA_LINEAR; |
| else |
| input_gamma_default = PNG_DEFAULT_sRGB; |
| |
| /* Call png_set_alpha_mode to set the default for the input gamma; the |
| * output gamma is set by a second call below. |
| */ |
| png_set_alpha_mode_fixed(png_ptr, PNG_ALPHA_PNG, input_gamma_default); |
| } |
| |
| if (linear) |
| { |
| /* If there *is* an alpha channel in the input it must be multiplied |
| * out; use PNG_ALPHA_STANDARD, otherwise just use PNG_ALPHA_PNG. |
| */ |
| if (base_format & PNG_FORMAT_FLAG_ALPHA) |
| mode = PNG_ALPHA_STANDARD; /* associated alpha */ |
| |
| else |
| mode = PNG_ALPHA_PNG; |
| |
| output_gamma = PNG_GAMMA_LINEAR; |
| } |
| |
| else |
| { |
| mode = PNG_ALPHA_PNG; |
| output_gamma = PNG_DEFAULT_sRGB; |
| } |
| |
| /* If 'do_local_background' is set check for the presence of gamma |
| * correction; this is part of the work-round for the libpng bug |
| * described above. |
| * |
| * TODO: fix libpng and remove this. |
| */ |
| if (do_local_background) |
| { |
| png_fixed_point gtest; |
| |
| /* This is 'png_gamma_threshold' from pngrtran.c; the test used for |
| * gamma correction, the screen gamma hasn't been set on png_struct |
| * yet; it's set below. png_struct::gamma, however, is set to the |
| * final value. |
| */ |
| if (png_muldiv(>est, output_gamma, png_ptr->colorspace.gamma, |
| PNG_FP_1) && !png_gamma_significant(gtest)) |
| do_local_background = 0; |
| |
| else if (mode == PNG_ALPHA_STANDARD) |
| { |
| do_local_background = 2/*required*/; |
| mode = PNG_ALPHA_PNG; /* prevent libpng doing it */ |
| } |
| |
| /* else leave as 1 for the checks below */ |
| } |
| |
| /* If the bit-depth changes then handle that here. */ |
| if (change & PNG_FORMAT_FLAG_LINEAR) |
| { |
| if (linear /*16-bit output*/) |
| png_set_expand_16(png_ptr); |
| |
| else /* 8-bit output */ |
| png_set_scale_16(png_ptr); |
| |
| change &= ~PNG_FORMAT_FLAG_LINEAR; |
| } |
| |
| /* Now the background/alpha channel changes. */ |
| if (change & PNG_FORMAT_FLAG_ALPHA) |
| { |
| /* Removing an alpha channel requires composition for the 8-bit |
| * formats; for the 16-bit it is already done, above, by the |
| * pre-multiplication and the channel just needs to be stripped. |
| */ |
| if (base_format & PNG_FORMAT_FLAG_ALPHA) |
| { |
| /* If RGB->gray is happening the alpha channel must be left and the |
| * operation completed locally. |
| * |
| * TODO: fix libpng and remove this. |
| */ |
| if (do_local_background) |
| do_local_background = 2/*required*/; |
| |
| /* 16-bit output: just remove the channel */ |
| else if (linear) /* compose on black (well, pre-multiply) */ |
| png_set_strip_alpha(png_ptr); |
| |
| /* 8-bit output: do an appropriate compose */ |
| else if (display->background != NULL) |
| { |
| png_color_16 c; |
| |
| c.index = 0; /*unused*/ |
| c.red = display->background->red; |
| c.green = display->background->green; |
| c.blue = display->background->blue; |
| c.gray = display->background->green; |
| |
| /* This is always an 8-bit sRGB value, using the 'green' channel |
| * for gray is much better than calculating the luminance here; |
| * we can get off-by-one errors in that calculation relative to |
| * the app expectations and that will show up in transparent |
| * pixels. |
| */ |
| png_set_background_fixed(png_ptr, &c, |
| PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, |
| 0/*gamma: not used*/); |
| } |
| |
| else /* compose on row: implemented below. */ |
| { |
| do_local_compose = 1; |
| /* This leaves the alpha channel in the output, so it has to be |
| * removed by the code below. Set the encoding to the 'OPTIMIZE' |
| * one so the code only has to hack on the pixels that require |
| * composition. |
| */ |
| mode = PNG_ALPHA_OPTIMIZED; |
| } |
| } |
| |
| else /* output needs an alpha channel */ |
| { |
| /* This is tricky because it happens before the swap operation has |
| * been accomplished; however, the swap does *not* swap the added |
| * alpha channel (weird API), so it must be added in the correct |
| * place. |
| */ |
| png_uint_32 filler; /* opaque filler */ |
| int where; |
| |
| if (linear) |
| filler = 65535; |
| |
| else |
| filler = 255; |
| |
| # ifdef PNG_FORMAT_AFIRST_SUPPORTED |
| if (format & PNG_FORMAT_FLAG_AFIRST) |
| { |
| where = PNG_FILLER_BEFORE; |
| change &= ~PNG_FORMAT_FLAG_AFIRST; |
| } |
| |
| else |
| # endif |
| where = PNG_FILLER_AFTER; |
| |
| png_set_add_alpha(png_ptr, filler, where); |
| } |
| |
| /* This stops the (irrelevant) call to swap_alpha below. */ |
| change &= ~PNG_FORMAT_FLAG_ALPHA; |
| } |
| |
| /* Now set the alpha mode correctly; this is always done, even if there is |
| * no alpha channel in either the input or the output because it correctly |
| * sets the output gamma. |
| */ |
| png_set_alpha_mode_fixed(png_ptr, mode, output_gamma); |
| |
| # ifdef PNG_FORMAT_BGR_SUPPORTED |
| if (change & PNG_FORMAT_FLAG_BGR) |
| { |
| /* Check only the output format; PNG is never BGR; don't do this if |
| * the output is gray, but fix up the 'format' value in that case. |
| */ |
| if (format & PNG_FORMAT_FLAG_COLOR) |
| png_set_bgr(png_ptr); |
| |
| else |
| format &= ~PNG_FORMAT_FLAG_BGR; |
| |
| change &= ~PNG_FORMAT_FLAG_BGR; |
| } |
| # endif |
| |
| # ifdef PNG_FORMAT_AFIRST_SUPPORTED |
| if (change & PNG_FORMAT_FLAG_AFIRST) |
| { |
| /* Only relevant if there is an alpha channel - it's particularly |
| * important to handle this correctly because do_local_compose may |
| * be set above and then libpng will keep the alpha channel for this |
| * code to remove. |
| */ |
| if (format & PNG_FORMAT_FLAG_ALPHA) |
| { |
| /* Disable this if doing a local background, |
| * TODO: remove this when local background is no longer required. |
| */ |
| if (do_local_background != 2) |
| png_set_swap_alpha(png_ptr); |
| } |
| |
| else |
| format &= ~PNG_FORMAT_FLAG_AFIRST; |
| |
| change &= ~PNG_FORMAT_FLAG_AFIRST; |
| } |
| # endif |
| |
| /* If the *output* is 16-bit then we need to check for a byte-swap on this |
| * architecture. |
| */ |
| if (linear) |
| { |
| PNG_CONST png_uint_16 le = 0x0001; |
| |
| if (*(png_const_bytep)&le) |
| png_set_swap(png_ptr); |
| } |
| |
| /* If change is not now 0 some transformation is missing - error out. */ |
| if (change) |
| png_error(png_ptr, "png_read_image: unsupported transformation"); |
| } |
| |
| PNG_SKIP_CHUNKS(png_ptr); |
| |
| /* Update the 'info' structure and make sure the result is as required; first |
| * make sure to turn on the interlace handling if it will be required |
| * (because it can't be turned on *after* the call to png_read_update_info!) |
| * |
| * TODO: remove the do_local_background fixup below. |
| */ |
| if (!do_local_compose && do_local_background != 2) |
| passes = png_set_interlace_handling(png_ptr); |
| |
| png_read_update_info(png_ptr, info_ptr); |
| |
| { |
| png_uint_32 info_format = 0; |
| |
| if (info_ptr->color_type & PNG_COLOR_MASK_COLOR) |
| info_format |= PNG_FORMAT_FLAG_COLOR; |
| |
| if (info_ptr->color_type & PNG_COLOR_MASK_ALPHA) |
| { |
| /* do_local_compose removes this channel below. */ |
| if (!do_local_compose) |
| { |
| /* do_local_background does the same if required. */ |
| if (do_local_background != 2 || |
| (format & PNG_FORMAT_FLAG_ALPHA) != 0) |
| info_format |= PNG_FORMAT_FLAG_ALPHA; |
| } |
| } |
| |
| else if (do_local_compose) /* internal error */ |
| png_error(png_ptr, "png_image_read: alpha channel lost"); |
| |
| if (info_ptr->bit_depth == 16) |
| info_format |= PNG_FORMAT_FLAG_LINEAR; |
| |
| # ifdef PNG_FORMAT_BGR_SUPPORTED |
| if (png_ptr->transformations & PNG_BGR) |
| info_format |= PNG_FORMAT_FLAG_BGR; |
| # endif |
| |
| # ifdef PNG_FORMAT_AFIRST_SUPPORTED |
| if (do_local_background == 2) |
| { |
| if (format & PNG_FORMAT_FLAG_AFIRST) |
| info_format |= PNG_FORMAT_FLAG_AFIRST; |
| } |
| |
| if ((png_ptr->transformations & PNG_SWAP_ALPHA) != 0 || |
| ((png_ptr->transformations & PNG_ADD_ALPHA) != 0 && |
| (png_ptr->flags & PNG_FLAG_FILLER_AFTER) == 0)) |
| { |
| if (do_local_background == 2) |
| png_error(png_ptr, "unexpected alpha swap transformation"); |
| |
| info_format |= PNG_FORMAT_FLAG_AFIRST; |
| } |
| # endif |
| |
| /* This is actually an internal error. */ |
| if (info_format != format) |
| png_error(png_ptr, "png_read_image: invalid transformations"); |
| } |
| |
| /* Now read the rows. If do_local_compose is set then it is necessary to use |
| * a local row buffer. The output will be GA, RGBA or BGRA and must be |
| * converted to G, RGB or BGR as appropriate. The 'local_row' member of the |
| * display acts as a flag. |
| */ |
| { |
| png_voidp first_row = display->buffer; |
| ptrdiff_t row_bytes = display->row_stride; |
| |
| if (linear) |
| row_bytes *= 2; |
| |
| /* The following expression is designed to work correctly whether it gives |
| * a signed or an unsigned result. |
| */ |
| if (row_bytes < 0) |
| { |
| char *ptr = png_voidcast(char*, first_row); |
| ptr += (image->height-1) * (-row_bytes); |
| first_row = png_voidcast(png_voidp, ptr); |
| } |
| |
| display->first_row = first_row; |
| display->row_bytes = row_bytes; |
| } |
| |
| if (do_local_compose) |
| { |
| int result; |
| png_voidp row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, info_ptr)); |
| |
| display->local_row = row; |
| result = png_safe_execute(image, png_image_read_composite, display); |
| display->local_row = NULL; |
| png_free(png_ptr, row); |
| |
| return result; |
| } |
| |
| else if (do_local_background == 2) |
| { |
| int result; |
| png_voidp row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, info_ptr)); |
| |
| display->local_row = row; |
| result = png_safe_execute(image, png_image_read_background, display); |
| display->local_row = NULL; |
| png_free(png_ptr, row); |
| |
| return result; |
| } |
| |
| else |
| { |
| png_alloc_size_t row_bytes = display->row_bytes; |
| |
| while (--passes >= 0) |
| { |
| png_uint_32 y = image->height; |
| png_bytep row = png_voidcast(png_bytep, display->first_row); |
| |
| while (y-- > 0) |
| { |
| png_read_row(png_ptr, row, NULL); |
| row += row_bytes; |
| } |
| } |
| |
| return 1; |
| } |
| } |
| |
| int PNGAPI |
| png_image_finish_read(png_imagep image, png_const_colorp background, |
| void *buffer, png_int_32 row_stride, void *colormap) |
| { |
| if (image != NULL && image->version == PNG_IMAGE_VERSION) |
| { |
| png_uint_32 check; |
| |
| if (row_stride == 0) |
| row_stride = PNG_IMAGE_ROW_STRIDE(*image); |
| |
| if (row_stride < 0) |
| check = -row_stride; |
| |
| else |
| check = row_stride; |
| |
| if (image->opaque != NULL && buffer != NULL && |
| check >= PNG_IMAGE_ROW_STRIDE(*image)) |
| { |
| if ((image->format & PNG_FORMAT_FLAG_COLORMAP) == 0 || |
| (image->colormap_entries > 0 && colormap != NULL)) |
| { |
| int result; |
| png_image_read_control display; |
| |
| memset(&display, 0, (sizeof display)); |
| display.image = image; |
| display.buffer = buffer; |
| display.row_stride = row_stride; |
| display.colormap = colormap; |
| display.background = background; |
| display.local_row = NULL; |
| |
| /* Choose the correct 'end' routine; for the color-map case all the |
| * setup has already been done. |
| */ |
| if (image->format & PNG_FORMAT_FLAG_COLORMAP) |
| result = |
| png_safe_execute(image, png_image_read_colormap, &display) && |
| png_safe_execute(image, png_image_read_colormapped, &display); |
| |
| else |
| result = |
| png_safe_execute(image, png_image_read_direct, &display); |
| |
| png_image_free(image); |
| return result; |
| } |
| |
| else |
| return png_image_error(image, |
| "png_image_finish_read[color-map]: no color-map"); |
| } |
| |
| else |
| return png_image_error(image, |
| "png_image_finish_read: invalid argument"); |
| } |
| |
| else if (image != NULL) |
| return png_image_error(image, |
| "png_image_finish_read: damaged PNG_IMAGE_VERSION"); |
| |
| return 0; |
| } |
| |
| #endif /* PNG_SIMPLIFIED_READ_SUPPORTED */ |
| #endif /* PNG_READ_SUPPORTED */ |